Used Test Machinery for sale (80,890)

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Fodpfx Aortrzdeptjgg Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 1,300 kg, total width: 820 mm, total length: 1,650 mm, total height: 1,600 mm, cutting force: 100 t, pressure: 160 bar, warranty duration: 12 months, year of last overhaul: 2026, power: 7.5 kW (10.20 HP), MIZAR ALS Series - Hydraulic Alligator Shear / Crocodile Shear for Scrap Metal & Cables High-Precision Hydraulic Cutting for Scrap Cables & Metals The MIZAR ALS Series is engineered for powerful and reliable hydraulic cutting of scrap cables, aluminum, copper, and various metal profiles. Designed for durability and operational safety, ALS shears deliver consistent cutting performance in demanding recycling environments. ENGINEERED FOR INDUSTRIAL PERFORMANCE & ADVANTAGES • Advanced Hydraulic System: Equipped with a premium Bosch Rexroth hydraulic system to ensure stable pressure, smooth and fast operation, and a long service life. • Hardened Cylinder Shafts: Induction-hardened and chrome-plated cylinder shafts provide superior wear resistance and corrosion protection, ensuring continuous performance under heavy-duty conditions. • High-Strength Blade Technology: Specially processed, high-alloy tool steel blades offer high cutting efficiency and an extended blade lifetime, significantly reducing maintenance frequency. • Industrial-Grade Electronics: All electrical and electronic components are powered by Siemens, ensuring maximum operational reliability and global service availability. Fully CE and EAC certified for international compliance. Fedpsyyuptsfx Aptjgg APPLICATION AREAS • Cable Recycling: Scrap copper and aluminum cables, heavy-duty wire harnesses. • Non-Ferrous Metals: Aluminum profiles, extrusions, and window frames. • Heavy Scrap: Copper busbars, conductor bars, and industrial metal offcuts. • Light Metal Scrap: General metal cleaning and preparation for further shredding or smelting. MODEL RANGE & TECHNICAL HIGHLIGHTS (Please ask for the exact configuration based on your material type and capacity) • ALS S1: Compact and efficient solution for medium-capacity operations. • ALS M1: Extended cutting capacity for larger cross-sections and higher throughput requirements. Why MIZAR ALS Series? • High hydraulic stability and precision cutting • Long blade lifetime with low maintenance costs • Safe and operator-friendly design (foot-pedal operated) • Plug-and-play installation for immediate use • Built for continuous industrial recycling environments Need a cutting solution tailored to your material? Contact us for a customized quotation, technical details, or send your material for a performance test. Mizar Recycling Machinery

Condition: excellent (used), Zwick Type: BT1-FR050TH.A1K 50 kN Universal Testing Machine Zwick/Roell BT1-FR050TH.A1K Material Testing Machine – Precise Strain Gauge Testing Note: PC not included!! Highlights: - Test force: 50 kN (tension/compression) - High-precision TC-MODCSCC module for strain gauge load cells (4- & 6-wire) - Measuring range: 0.2 – 165% of nominal value, data acquisition up to 500 Hz - Maximum resolution: up to 297,000 points (at 50 Hz) - Positioning repeatability: ±10 µm - Crosshead speed: 0.0005 – 600 mm/min - Robust construction - Compact dimensions: 1,814–2,688 mm height, 936 mm width, 722 mm depth Fjdpezii Ugefx Aptsgg - Low noise: 59 dB(A) - Ambient conditions: +10 to +35 °C, humidity 20–90% Special features: - Ideal for research, development, or industrial material testing Dimensions & weight: Load frame: - Test force (tension/compression): 50 kN - Load frame height: 1,714 mm - Overall height: 1,814 – 2,688 mm - Load frame width: 760 mm - Overall width: 936 mm - Load frame depth: 477 mm - Overall depth: 722 mm Weight: - With electronic unit: 230 kg - With typical accessories: approx. 300 kg Condition: used Scope of delivery: (see picture) - ZwickRoell BT1-FR050TH.A1K testing machine - Operating manual (Specifications are subject to change and errors excepted!) If you have any questions, we are happy to answer them by phone.

Condition: excellent (used), functionality: fully functional, working width: 300 mm, brushing unit diameter: 240 mm, total length: 3,600 mm, total width: 1,000 mm, total height: 900 mm, height adjustment type: electric, overall weight: 400 kg, working height: 100 mm, workpiece height (max.): 100 mm, workpiece width (max.): 300 mm, workpiece length (max.): 3,600 mm, WOOD AGING BRUSHING MACHINE | 4 BRUSHES | 300 MM Sanding machine for aged wood JBS MACHINERY PROCHERA! Professional PROCHERA brushing/sanding machine designed for structuring, brushing, and aging wood. The machine features 4 independent brushing units and a conveyor belt with adjustable feed speed. It is a robust industrial design intended for continuous processing of wooden components. This brushing machine is ideal for producing aged boards, wooden flooring, facades, countertops, decorative elements, paneling, and other products requiring the enhancement of the natural wood grain. TECHNICAL DATA - Manufacturer: PROCHERA - Type: brushing/sanding machine for wood structuring - Number of working units: 4 - Number of brushes: 4 - diameter 240mm - Maximum working width: 300 mm - Maximum height of workpiece: 100 mm - Feed speed: 0–23 m/min - Conveyor: belt type - Feed speed adjustment: stepless - Adjustment of working units: independent - Brush working direction: option for co-rotating/counter-rotating operation Gross price including VAT margin or 23% VAT invoice PROCHERA uses various types of brushes in these machines, allowing for both delicate and deep surface structuring. The first units can be equipped with metal brushes for more aggressive grain exposure, and subsequent units can use abrasive brushes for further processing and surface smoothing. The machine is primarily intended for: wood brushing, surface structuring, wood aging, exposing the natural grain pattern, surface preparation before oiling, wood preparation before waxing or varnishing, production of flooring boards, production of facade boards, production of countertops and decorative elements, processing of solid wood. Thanks to the four working units, it is possible to achieve multi-stage surface processing – from a strong opening of the wood structure to its further smoothing and finishing. WHY IS IT WORTH IT? This is a professional machine for companies involved in the production of aged boards, flooring, facades, countertops, and wooden decorative elements. Four working units allow for significantly greater flexibility compared to simple single-unit brushing machines. Adjustable feed allows for the selection of operating parameters for a specific material and desired effect. The machine is ready for further operation. Possibility to view the machine and test its operation after prior contact. Fgjdpjzxz T Tofx Aptog JBS MACHINERY JBS MACHINERY GROUP Sp. z o.o. New and used woodworking machines Professional wood processing equipment Possibility to arrange transport in Poland and Europe. We invite you to contact us regarding price, additional photos, a video of the machine in operation, and details regarding transport.

Condition: good (used), Manufacturer: WMW WPM Material Testing Machines Leipzig Year of manufacture: Model: Test method: Table diameter: 200 mm Support diameter: 100 mm Throat depth: mm Test height: 300 mm Spindle diameter: 50 mm Test force: 15.5 to 250 kg Fgjdpjy Hka Usfx Aptsg Accessories: Weight: 130 kg Footprint: 500 x 200 mm Dimensions: 500 x 300 x 730 mm Condition: good

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, Submitting a bid obligates you to collect the item by September 21, 2026! TECHNICAL DETAILS Sheet size: max. 3,048 x 1,524 mm Z-axis stroke: 70 mm Sheet thickness steel: 20 mm Sheet thickness stainless steel: 20 mm Sheet thickness aluminum: 12 mm Positional deviation Pa: ± 0.1 mm/m Positional scatter Ps: ± 0.05 mm Table load capacity: 750 kg Table changeover time: approx. 35 s Positioning speed X/Y axis parallel: max. 100 m/min Positioning speed X/Y axis simultaneous: max. 140 m/min Axis acceleration X/Y: max. 12 m/s² Fgsdpfx Aszwmn Tsptjg Cutting speed: max. 50 m/min MACHINE DETAILS Beam source: ByLaser 4400 Laser type: CO₂ laser Laser power: max. 4,400 W Wavelength: 10,600 nm Machine weight: 12,000 kg Laser weight: 1,700 kg EQUIPMENT 2 cutting heads with 5-inch and 7.5-inch lenses

Condition: like new (used), functionality: fully functional, working width: 1,300 mm, grinding width: 1,300 mm, overall weight: 2,240 kg, grinding height: 160 mm, working height: 160 mm, height adjustment type: electric, workpiece height (max.): 160 mm, table width: 1,300 mm, workpiece width (max.): 1,300 mm, VIET Challenge 211 B Wide Belt Sander – 2 Heads! LIKE NEW! Professional, Italian wide belt sander – VIET Italia Challenge 211 B calibrator. This machine is equipped with two sanding heads, enabling calibration and precise sanding in a single pass. Head configuration: - First head – calibrating roller - Second head – hard rubber roller for precise sanding - Pneumatic oscillation and belt tensioning - Air blowing and cleaning system for the belts on both heads - Pressure rollers for processing shorter workpieces The machine is suitable for processing solid wood, laminated boards, MDF, plywood, veneer, and furniture components. Its heavy-duty construction ensures stability, high calibration accuracy, and excellent surface finish. Technical data: - Manufacturer: VIET Italia - Model: Challenge 211 B - Type: Wide belt sander / calibrator - Number of sanding heads: 2 - Maximum working width: 1300 mm - Material thickness range: approximately 3–160 mm - Adjustable feed speed - Control from the operator panel - Pneumatic belt tensioning - Pneumatic belt oscillation - Air blowing of sanding belts - Pressure rollers for short workpieces - Power supply: 400 V - Compressed air requirement: approximately 6 bar - Machine weight: approximately 2240 kg Fgodpfxszxz E Ns Aptog The machine is available immediately. It can be started and inspected before purchase. We offer assistance with loading and can arrange transport throughout Poland and abroad. JBS WOODWORKING MACHINERY Sale of used and new woodworking machines. It is possible to view the machine in operation by prior arrangement. You can test the machine on-site. Financing options are available through leasing or installment plans. WE ORGANIZE TRANSPORT WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: used, Year of construction: 2010, gebraucht 2010 080065 prompt, Zwischenverkauf v Deutschland 29800 € 1 Fsdpfjwiri Ajx Aptogg 2040 mm 3 mm 2 mm 4.5 mm Motorisch 1.5 kW 1.1 kW 3060 mm 1650 mm 1500 mm 2730 kg 750 mm 140 mm 50 °/sek CNC control ECT (Schneider Magelis) - Input of bending angle, depth stop dimension, lifting height, folding, precut - max. 36 bending angles can be saved per set - max. 510 sets can be saved - comfortable 7.5" color touch TFT monitor - Power mode for material-friendly operation - Soft start of the bending beam and the depth stop - Visual user guidance in the event of faults (diagnosis center) - Selection of different languages ??such as German, English ... CNC back gauge - Back gauge range 6 - 750 mm - Drive via belt - 6 stop fingers - support plates with brushes Sectioned goose neck rail height 75 mm Additional 10 mm rail on the bening beam Flat rail R 1 mm Flat rail R 2 mm Mechanical drive via gear brake motor Upper beam drive via double eccentric Foot pedal Operating instructions in German with CE declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, Year of construction: 2023, gebraucht 2023 4546 prompt, Zwischenverkauf v Taiwan 32800 € 1 65 - 2600 U/min ISO 40 420 x 220 x 380 mm 840 x 390 mm 2.2 kW 1600 mm 1700 mm 2000 mm 1145 kg 840 x 390 mm 1000 mm/min 5 14 x 63 mm 200 kg 420 mm 220 mm 380 mm 0 - 600 mm/min. 0 - 600 mm/min. 65 - 2600 90 - 310 mm 65 - 2600 +/- 90° ° 100 mm manuell 2,2 kW 950 x 250 mm 90 - 310 mm 100 - 480 mm demo machine / mint condition net price (price for new machine € 41.800,00) swiveling operating panel 3 axes digital read out Fagor 40i Innova motor for horizontal- and vertical spindle: 2,2 kW feed motors with inverter for X/Y/Z: 0,35 / 0,35 / 0,75 kW ball screw spindles for X/Y/Z axes manual gear box for spindle speeds 1 pc. long milling arbor 27 mm 3 pcs. recustion sleeves (MK1, MK2, MK3) 1 pc. drawing bar ISO40 for horizontal or vertical spindle spindle protection with switch table safety guard with doors with switches outer arbor support for horizontal spindle LED work lamp automatic lubrication for X/X/Z guidways safety hand wheels for X/Y/Z axes coolant equipment with chip tray covers for X/Z axes level pads and bolts tool box with tools operating manual in English or German according to CE rules BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. Fedpowirdgefx Aptegg • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: like new (used), Year of construction: 2025, operating hours: 5 h, functionality: fully functional, machine/vehicle number: 01/2025, Large-format laminator for laminating materials from roll. The machine is adapted for coating PVC tarpaulins. New machine from 2025, used 3 times for testing purposes only. Machine dimensions: 4200x1200x1400 (LxWxH). Weight: approx. 600 kg. Production capacity: 30 linear meters/hour. Lacquer application: forced via 24V peristaltic pump up to 20L/h. Fodsyxfqljpfx Aptogg Capable of coating products up to 3.2 m wide. Machine equipped with a strip of IR emitters (12 pcs) for lacquer drying, a blower strip for product cooling, and thermocouples for temperature measurement. Tension regulation of the material is managed by pneumatic reducers. Media: power supply 3-phase/64A/5-pin plug, installed power up to 10kW, compressed air up to 4 bar. Machine under warranty, CE Machinery Directive compliant. User manual available. Machine is connected to utilities and can be tested on-site.

Condition: used, Year of construction: 2011, You are bidding on: a branded folding press from a very reputable and well-known manufacturer – Geka. Device features: - Folding press - Rail bends cleanly – test possible - Degree indicator - Bending length: slightly over 2 m - Sheet thickness: 2 mm (iron sheet; greater possible for aluminum, zinc, etc.) - Machine bends pneumatically via foot pedal - 15 cm front rail removable, leaving a 1 cm rail (desired by many; together 2.5 cm) Guillotine shear HT 200 or Schröder electric guillotine shear, 2 m – 2.5 mm ... manual lever shears also optionally available. Important: Fsdpfeyk H E Tox Aptsgg Optionally, you can find and purchase a wide range of machinery and machine accessories (e.g., different rails, depth stops) for sheet metal and steel processing in our shop. This includes folding presses, guillotine shears, drill presses, slip rollers, slitting and profiling machines, and corresponding accessories (beading devices, round rollers for gutter production, back gauge, etc.), as well as additional hand tools and spare parts from many top manufacturers. Feel free to contact me with any questions. You will receive an invoice with VAT shown separately. Free loading is available – weight approx. 850 kg. Inspection and testing are possible and encouraged by prior telephone appointment. Payment in cash upon collection. Benefit from our experience and expertise—we will be happy to advise you. Collection by the buyer (or a shipping company commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 motorways.

Condition: used, machine/vehicle number: J36860, National Machinery double-pressure press type M56, good condition, 3 pieces available Fgsdpfswiwpuex Apteg

Condition: new, Year of construction: 2025, functionality: fully functional, power: 20 kW (27.19 HP), cutting height (max.): 110 mm, cutting width (max.): 4,300 mm, overall weight: 7,200 kg, cutting length (max.): 4,300 mm, table width: 4,300 mm, warranty duration: 12 months, Equipment: scorer, New Panel Dividing Saw / Saw Center – New Machine For sale is a new, high-performance panel dividing saw (saw center) designed for the industrial processing of wood-based materials, particle boards, MDF, HDF, and coated panels. This machine stands out for its high precision, powerful drives, and fast feed rates—ideal for professional furniture manufacturing and interior fittings. Technical specifications: • Maximum cutting length: 4,300 mm Fgodpfsyhhx Asx Apteg • Maximum cutting width: 4,300 mm • Minimum gripper opening during cutting: 34 x 45 mm • Maximum cutting height: 110 mm • Feed speed, saw unit (work cycle): 95 m/min • Return speed (rapid traverse): 120 m/min • Feed speed, program pusher: 95 m/min • Main saw blade: Ø 450 mm (bore 75 mm) • Scoring saw blade: Ø 200 mm (bore 50 mm) • Main motor power: 18.5 kW • Scoring unit power: 2.2 kW • Program pusher power: 2 kW • Saw carriage power: 2 kW • Total installed power: 33 kW • Pneumatic working pressure: 0.6 MPa • Number of clamps: 12 • Machine dimensions (LxWxH): 7,901 x 6,656 x 1,890 mm • Weight: 7,200 kg The machine is brand new and immediately available for operation. Ideal for series production as well as flexible custom manufacturing.

Condition: excellent (used), max. wheel diameter 200 mm gear width 300 mm module 0,5 - 25 centre distance 750 mm weight of the machine ca. 0,2 t Fodpoy Umi Isfx Aptegg dimensions of the machine ca. 0,8 x 0,6 x 0,6 m worm testing roll-machine

Condition: used, Year of construction: 2000, gebraucht 2000 070165A prompt, Zwischenverkauf v Italien 19800 € 1 40 to 2.6 mm 650 mm 380 mm 120 mm 8 - 78 mm 145 1/min 6 60 mm 40 mm 195 mm 297 mm 800 mm Fgjdpeyrhpvefx Aptog 3 kW 1450 mm 1150 mm 2150 mm 2200 kg Two-hand control panel and foot pedal Work area enclosure with safety switch Additional bolster plate Central lubrication system Stroke counter Operating manual with CE declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: excellent (used), planing width: 510 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 5,000 rpm, total length of planing tables: 2,800 mm, total width: 900 mm, total height: 1,000 mm, overall weight: 820 kg, PANHANS 510mm Planer/Jointer | 4 traditional knives! GERMAN MANUFACTURER! TECHNICAL SPECIFICATIONS: – Table length 2800 mm – Infeed table length 1600 mm – Outfeed table length 1150 mm – Working width 510 mm – 4 traditional knives – 4kW motor – Shaft RPM 5000 – Both tables adjustable – Stable, robust fence – Shaft damping system Machine dimensions Length: 2800 mm Width: 900 mm Height: 1000 mm Model: TYPE 325 Fodpezx Ru Tjfx Aptjgg Weight: 820 kg We offer the possibility of organizing transport throughout Poland and abroad. We also assist with loading. JBS WOODWORKING MACHINERY Sale of used and new woodworking machines. It is possible to view the machine in operation by prior arrangement. It is possible to test the machine on-site. Financing options available through leasing or installment payments. WE ORGANIZE TRANSPORT WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: excellent (used), Year of construction: 1975, Breaking device . bar material dia. 10 - 45 mm bar material stranggepreßte NE-Stangen weight of the machine ca. 3 t Bending and breaking device simple and sturdy device to detect internal flaws in extruded non-ferrous metal rods Fodpfx Apoit Ev Tstjgg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), Hardness tester, fully functional Fgsdpfx Apozvfd Rotjg Upon request, transport and loading can be organized throughout Europe at an additional cost. Prices are exclusive of VAT. Inspection possible by appointment. Please contact us – our team will be happy to assist you. Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY, MACHINE TOOLS, AND MORE. Are you looking for a high-quality yet affordable machine for your production? Or do you wish to sell your equipment? For further information or contact options, please reach out via the contact form.

Year of construction: 2025, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 54942, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be organized by the buyer! TECHNICAL DETAILS Nominal test force: 50 kN Test stroke: < 1,400 mm Usable distance between pressure plates: approx. 800 mm Test area width: 500 mm Test speed: continuously variable 0.001–1,200 mm/min Resolution of displacement measurement: ≤ 0.001 mm Diameter of pressure plates: 246 mm Centering bore: 40 mm Thread: M12 Hardness: ≥ 56 HRC Design: Steel, hardened, rotatable at the top and bottom, lockable at 0° Measuring range of the enveloping circle: 30–250 mm Fgedpfx Apozx S Egotsg Design: Probe with bearing rollers Measurement: Recording under load MACHINE DETAILS Control system: Control system with control computer Test program: Enveloping circle measurement Network: Fast Ethernet, 100 Mbit/s between the control computer and the separately required operating PC Software delivery: USB stick with installation software Documentation: Version and license status not documented separately Last calibration: 08/04/2025 Dimensions & Weight Machine dimensions: approx. 750 × 900 × 1,950 mm Base frame dimensions: approx. 730 × 900 × 700 mm Control cabinet with control computer dimensions: approx. 600 × 600 × 1,900 mm Machine weight: approx. 490 kg Base frame weight: approx. 50 kg Voltage supply: 3 × 400 V AC, 50 Hz, N + PE Type plate power: 3,000 W Connected power: approx. 3 kVA EQUIPMENT Base frame Control cabinet with control computer Rotatable pressure plates Enveloping circle measuring device with probes and bearing rollers USB stick with installation software Compressed air connection: Pneumatic connection with shut-off valve Note: The functionality has been tested and confirmed. However, an unresolved error message on the drive prevents further use. The machine is in like-new condition visually. The operating PC is not included in the offer.

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 0-201-08-1422, functionality: fully functional, operating hours: 17,952 h, number of slots in tool magazine: 24, working width: 1,600 mm, spindle motor power: 15 W, number of spindles: 2, working length: 4,760 mm, Machining center with automatic material handling (serial number: 0-205-08-1424) TECHNICAL DETAILS Travel in X-axis: approx. 4,760 mm Travel in Y-axis: approx. 1,600 mm Main spindles: 2 Power of main spindles: 15 kW each Tool interface: HSK F63 Number of drilling heads: 2 Tool changer: 2 × 12-position MACHINE DETAILS Control system: PC85 / woodWOP Operating hours CNC: 17,952 h EQUIPMENT Automatic AP console tables Chip and waste disposal Safety enclosure Associated HOMAG handling and return conveyor system Portal handling Vacuum crossbar Fgodpfx Apezx Anfstog Conveyor technology C-axes FLEX-5 preparation Automatically positionable vacuum clamps Liquid ring vacuum pumps Note on machine designation: BOF 712/48/16/AP was the actual historical machine type. CENTATEQ E-500 is the later/current model designation, which is now visible on the machine.

Condition: like new (used), Year of construction: 2020, operating hours: 50 h, machine/vehicle number: LW250*1000, Decanter centrifuge manufactured in 2020, but put into operation in May 2021! The machine is in like new condition (used in total approx. 50 operating hours)! The decanter is for sale due to a change in technology, it works flawlessly! Manufacturer: YIXING HEAD SEPARATOR MACHINERY CO. LTD., CHINA Year of manufacturing date: 2020 Serial Number: LW250*1000 Machine signal: 02-001 Decanter indication number: 2647 Sludge formation capacity of decanter: 500 kg/h Main motor capacity: 7,5 KW Fgjdpfxjpu A D Ae Aptog Vice motor capacity: 3 KW Capacity: 1-5 m3/h Netto weight of decanter: 1000 kg Material of wetted parts:1.4404 Feed volume flow: 0,5t – 3t/h Stainless steel Reference number: 2590

Condition: used, Year of construction: 1975, max. wheel diameter 160 - 1.600 mm gear width 250 mm max. module 20 Fedpfx Apet Hwptotogg min. module 1,5 total power requirement 1 kW weight of the machine ca. 3 t dimensions of the machine ca. m

Condition: used, Year of construction: 2009, gebraucht 2009 9725 Fgjdpfjwiq D Eox Aptog prompt, Zwischenverkauf v Spanien 14700 € 1 110 to 300 mm 5 2 40x20 (28x28) mm 80 mm 17 1/min 600x15 (400x20) mm 605 mm 152x152x13 mm 50/50 mm 90x52x13 mm 5 kW 2130 mm 1200 mm 2200 mm 2500 kg 2 foot pedals for independent work at 2 stations hydr. drive flat bar shear with hydraulic downholder angle bar shear with minimum deformation by diagonal moving of the blade , with hydraulic downholder round and square bar shear rectangular notching unit punching unit up to diam. 40 mm oilfilling table at the punching station with gauge table at the notching unit with gauge table at the flat bar shear BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: new, Year of construction: 2026, overall weight: 6,500 kg, power: 50 kW (67.98 HP), shaft diameter: 800 mm, warranty duration: 12 months, MIZAR ERP Series - Eco Cable Recycling Plant & Copper Wire Granulator High-Purity Copper Recovery with Minimal Energy Consumption The ERP (Eco Recycling Plant) Series is Mizar’s latest innovation in eco-friendly cable recycling. Engineered to deliver maximum copper recovery with minimal energy consumption, this high-performance system provides a space-saving, sustainable solution for separating metal and plastic components from scrap cables with up to 99% purity. CORE COMPONENTS (Advanced 3-in-1 System) • Fine Granulator (FGR): Precision size reduction to prepare scrap cables for optimal separation. • Densimetric Separator (DES): Precise, density-based dry classification for the final separation of pure copper and plastics. • Dust Collector (DTF): Centralized filtration system ensuring a clean, low-dust, and eco-friendly workspace. Fgedpfx Apjzg Ikhetsg KEY ADVANTAGES & FEATURES • Eco-Friendly & Energy Efficient: Optimized material flow drastically reduces power consumption while maintaining high throughput. • Smart Operation: PLC-controlled touch-screen interface for real-time monitoring and easy handling. • Compact & Versatile: Space-saving design that works perfectly as a standalone copper wire granulator or as part of a larger recycling line. • Heavy-Duty Durability: CE-certified and manufactured with premium-grade materials for long-term industrial use. MODEL RANGE & TECHNICAL SPECIFICATIONS • ERP S1: Capacity: Up to 400 kg/h | Total Power: 30 kW | Rotor: 350x400 mm | Blades (R+S): 7+2 • ERP M1: Capacity: Up to 800 kg/h | Total Power: 50 kW | Rotor: 350x800 mm | Blades (R+S): 14+4 • ERP L1: Capacity: Up to 1,300 kg/h | Total Power: 72 kW | Rotor: 350x1200 mm | Blades (R+S): 21+6 • ERP XL1: Capacity: Up to 2,000 kg/h | Total Power: 102 kW | Rotor: 350x1600 mm | Blades (R+S): 28+8 Ready to optimize your cable recycling with eco-friendly technology? Contact us for a customized quotation, technical drawings, or to arrange a performance test. Mizar Recycling Machinery

Condition: used, TECHNICAL DETAILS - Brinell tests 3000 Kg and 750 Kg, HB according to DIN EN ISO 6506-01 - Test height with table : 0 - 610 [mm] - Test height without table : 370 - 1.120 [mm] - Clamping surface on table : 500 x 600 [mm] - Clamping surface on sole : 810 x 1.425 [mm] - Reach : 310 - 1.095 [mm] - Arm swiveling : 220 [°] - Test group swiveling around its axis : 180 [°] - Vertical stroke of the test group : 750 [mm] - Floor space (except hydraulic unit) : 810 x 2.155 [mm] - Height : 3.500 [mm] - Weight : 4.000 [kg] - Voltage : 3x 400 [V] - Frequency : 50/60 [Hz] - Installed power : 3,5 [kVA] EQUIPMENT - Control panel : Stiefelmayer - Optical measuring system : Zeiss Fedpfeuhb Iusx Aptegg - Measuring electronics HM-Control - 2 measuring rules of imprint size : Heidenhain - Warning lights : good / outside the tolerance range - Statistic function - Exit for PV printing - Table - Hydraulic unit