Used Testing for sale (9,814)

Condition: used, Weiss Type: WK111-600 Weiss Climate Test Chamber, Air-cooled Performance Data for Temperature Tests: Temperature range: -5°C to +90°C Temporal temperature fluctuation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1 K (corresponds to temperature gradient): 1 to 2 K Temperature change rate: Heating: 0.5 K/min Cooling: 0.2 K/min Performance Data for Climatic Tests: Temperature range: +10 to +90°C Humidity range: 10 to 98% r.h. Temporal temperature fluctuation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1 K (corresponds to temperature gradient): 1 to 2 K Temporal humidity fluctuation: ±1 to ±3% Test Chamber Dimensions: Width 800 mm x Depth 800 mm x Height 950 mm Housing Dimensions: Width 1000 mm x Depth 1660 mm x Height 1975 mm Access Ports: 1 access port Ø 50 mm on the left side installed 1 access port Ø 125 mm on the right side installed Power Supply: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.3 kW Rated current: 10.0 A Refrigerant: R 404 A Capacity: 600 liters Weight: 540 kg For your security as a buyer, please note the following information! The following steps are performed on all our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant Bdodpfx Aoygum Djdrjb 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and errors excepted!) If you have further questions, feel free to contact us by phone.

Condition: excellent (used), Here we offer you a climate chamber. Water-cooled Test chamber volume: 350 liters Internal chamber dimensions: Height 750 mm, Width 650 mm, Depth 720 mm External dimensions: Height 1800 mm, Width 850 mm, Depth 1640 mm Temperature working range: Temperature range: -70°C to +180°C Bodpfoygumkjx Adrjdb Cooling rate: 3.0 K/min Heating rate: 5.0 K/min Climate working range: Temperature range: +10°C to +90°C Humidity range: +10% to 98% RH Dew point range: +5°C to 89.5°C Temperature deviation: ±0.1 - ±0.3 K over time Humidity deviation: ±1 - ±2% RH over time up to 90% RH max. ±1 - 3% RH over time above 90% RH Electrical connection: 400V +6-10%, 3/N, 50Hz Connected load: 13 kW Rated current: 25.5 A Refrigerant: R404A / R23 Weight: 650 kg Type: CS-70/350 For your safety as a buyer, please note the following information: The following steps are performed in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a trial run which is monitored with calibrated equipment. Condition: used Scope of delivery: (see photo) (Specifications, technical data and details may be subject to change. Errors excepted.) For any further questions, we are happy to assist you by phone.

Condition: excellent (used), Feutron Temperature Test Chamber We are offering a temperature test chamber here. Feutron Temperature Test Chamber, Air-Cooled Nominal test chamber volume: 280 liters Dimensions External dimensions: 1500 x 2040 x 1075 mm With fan motor and door removed: 1500 x 1940 x 925 mm Test chamber interior: 720 x 690 x 560 mm Door, clear opening: 720 x 690 mm Heated viewing window: 500 x 600 mm Temperature range -70°C to +180°C Heating rate: 4.0 K /min Cooling rate: 0.6 K /min Mains connection: 400 V 3/N/PE, AC, 50 Hz Maximum power consumption: 6.3 kW Weight: 600 kg Type: 3416/17 Refrigerants: R507 / R23 Bdsdpsygulyofx Adreb For your safety as a buyer, please note the following information! The following steps are carried out on all chambers we offer in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored with calibrated equipment. Condition: used Scope of delivery: (See photo) (Specifications subject to change and errors excepted!) If you have any further questions, we are happy to answer them by phone.

Condition: excellent (used), CTS Climate Test Chamber T-70/600 Water-Cooled Temperature Range: -70°C to +180°C Rated Voltage: 400V 3/N PE 50 Hz Rated Power: 6.7 kW Rated Current: 10.2 A Compressor: TFH2480Z/TFH2511Z, Refrigerant R23/R404A Control System: - Microprocessor-controlled regulation and monitoring system - Simple, user-friendly terminal integrated into the door - Digital display for set and actual temperature values - Easy adjustment via +/- keys - Digital input for temperature in °C - PLC-compatible - Up to 100 test programs possible - RS 232 interface - 2 free switching channels for user-side test specimen connections Shelving: Stainless steel, shelf area 820 x 710 mm Load capacity per shelf max. 35 kg Total load capacity with full shelf configuration 100 kg Cooling Unit: Water-cooled, low-noise, fully hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R404A/R23 Temperature Testing: Temperature range -70°C to +180°C Temperature deviation ±0.1 to 10.3 K over time Temperature change rate according to DIN 50 011, Part 12 measured at the center of the test chamber: Heating: 2.5 K/min Cooling: 2 K/min Thermal radiation max. 1500 W at +20°C Technical data refer to an ambient temperature of +25°C, rated voltage 400 V, without test specimen, without thermal radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions 850 x 830 x 850 mm (W x D x H) External dimensions 1050 x 1850 x 1900 mm (W x D x H) Operating Data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Bjdpfxeygultj Adredb Rated power 6.7 kW Rated current 10.2 A Protection class IP 22 Condensate drain non-pressurized, R 1/2" internal thread Sound pressure level < 62 dB(A) Weight approx. 400 kg For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information reserved!) Further questions can be answered by phone.

Condition: excellent (used), Weiss Model: WK3 600/0-M Weiss Climate Test Chamber, Water-Cooled Series: WK3-../0 with SIMPAC* Controller Test chamber volume: approx. 600 liters Test chamber dimensions: Height 950 mm, Width 800 mm, Depth 800 mm External dimensions: Height 1995 mm, Width 1090 mm, Depth 1660 mm Operating data: Test chamber lighting: LED 24 V, 6.8 W / Halogen bulb 2 x 24V, 50W Rated voltage: 1/N / PE AC 230 V ±10% 50 Hz Rated power: 2.3 kW Rated current: 10 A Site-provided fuse: 16 A slow-blow Control cabinet and operator panel protection class: IP 54 Maximum heat emission to environment: 1200 W Sound pressure level: Measured at a distance of 1m from the front, at a height of 1.6m: 46 dB(A) Data for temperature tests: Temperature range: -5°C to +90°C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1 K Temperature gradient (according to IEC 60068-3-5) Temperature change rate: Heating 0.6 K/min Cooling 0.3 K/min Heat compensation at +20°C to +50°C: 200 W Data for climatic tests: Temperature range: +10°C to +90°C Dew point range: 4 to +89.5°C Humidity range: 10 to 98 % r.h. Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.3 K Spatial temperature deviation: ± 0.5 to ± 1 K Temporal humidity deviation: +1 to +3 % r.h. Refrigerant: R-404A Weight: 610 kg For your safety as a buyer, please note the following information! The following points are carried out in advance on our offered chambers: 1. Functionality check and replacement of necessary components 2. Refilling with legally compliant refrigerant Bsdsygulmopfx Adredb 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Technical data and information subject to change and errors!) We are happy to answer any further questions you may have by phone.

Condition: excellent (used), We are offering a Weiss temperature test chamber for sale. Weiss Temperature Test Chamber with S!MCON / 32-controller, water-cooled Control Unit: "Touchpanel" All control and operation commands can be initiated by simply touching the function symbols on the "Touchpanel" control unit. Adjustable Feet The test chamber is equipped with adjustable feet to compensate for floor unevenness and to provide adequate ventilation for the machine section. Cable Ports Cable ports are installed on both the right and left sides of the test chamber. These allow measurement cables and test devices to be routed into the test space. Ports included as standard: - R1: NW 125 mm - L1: NW 50 mm (The refrigerant has been converted to R-452A) Test Chamber Volume: approx. 600 liters External dimensions with hinges and door lock: Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions without hinges and door lock: Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Temperature Test Data: Temperature range: -42 to +180 °C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (according to IEC 60068-3-5): - Heating: 4.0 K/min - Cooling: 3.0 K/min Maximum thermal compensation: 2500 W Operating Data: - Test chamber lighting: Halogen bulb 2 x 24V, 50W - Rated voltage: 3/N/PE AC 400V ±10% 50Hz - Rated current: 15 A; Rated power: 7.8 kW - Fuse (on-site): 16 A slow-blow - Sound pressure level: approx. 58 dB(A) (measured 1 m in front, 1 m height) - Refrigerant: R-452A - Weight: 620 kg Type: WT3-600/40 Important information for your safety as a buyer! The following steps are carried out on our offered chambers in advance: Bedsyguh Iepfx Adrodb 1. Function check and replacement of necessary components 2. Refill with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors reserved!) We are happy to answer any further questions by phone.

Year of construction: 2018, condition: good (used), Testing equipment used to ensure the quality and production output in a serial process for gearboxes assembly plant. Equipment contains universal robot, camera system and his own control unit. Equipment could be relearned in order to ensure the demanded operations of the client. Bdjdoh D Ezgjpfx Adrsb

Condition: excellent (used), functionality: fully functional, total height: 8,000 mm, installation height: 5,970 mm, total width: 6,000 mm, total length: 7,700 mm, table width: 3,500 mm, table length: 2,500 mm, table load: 59,000 kg, stroke length: 2,500 mm, pressing force: 300 t, Clamping force: 300 Ton Opening force of movable platen: 100 Ton Operating pressure: 250 bar Platen dimensions: 3,500 x 2,500 mm Minimum mold dimensions (at max clamping force): 2,800 x 2,000 mm Bdedpfoymltusx Adrsb Minimum daylight between platens: 1,400 mm Height of clamping platen from foundation: 930 mm Movable platen stroke: 2,000 mm Sliding table stroke: 2,500 mm Tilting angle of oscillating table: 110° Max. upper mold weight: 24 ton Max. lower mold (sliding table) weight: 59 ton Ground clearance: 5,970 mm Overall height: approx. 8,000 mm Machine width: approx. 6,000 mm Machine depth: approx. 7,700 mm

Year of construction: 2013, condition: good (used), Universal testing machine Zwick/roll Type: 1488 Modernized in 2013 with software Bdedpfx Aoxw N Uvodrjb Test force max.: 200 kN Required space: width: 2,000 mm, height: 2,100 mm, depth: 800 mm, weight approx. 1,000 kg.

Condition: new, TURBO-BOOST-TEST turbocharger boost testing bench allows for professional turbocharger calibration and performance evaluation. The test bench can be used in turbine tuning and refinement, in the manufacture of hybrid turbines, to test changes in turbine performance after tuning. Our test benches are advanced systems for turbocharger tuning and testing in dynamic mode. Its provide turbocharger testing under near realistic operating conditions, ensuring full process control and detection of any potential problems, including oil leaks. HIGHLIGHTS • Complete finish testing and tuning of automotive turbochargers for engines up to 3 liters • Dynamic turbocharger testing • Installation on the regular surfaces of fastening • Running in and check on an oil leak • Tuning of electronically driven turbos is done by connecting to an external tester ATP-3000 • Installation of turbochargers of any design KEY FEATURES • More than 2000 turbo references database • Calculate turbocharger performance; • Plot supercharging vs. inlet and outlet flow graph; • Generating the resulting graph; • Testing of actuator performance: vacuum, pneumatic and electric types; • Diagnosis of servo-drives of electric actuators (optional); • All measurements are done in real time. • Calibration of the test bench before starting work Bdodpfsttg S Ujx Adreb • N75 valve testing function • Built-in blower pump to create a constant airflow • Self-developed Boost Test software. • Creation and printing of reports on the tuning process. • Self-diagnostics SPECIFICATIONS Maximum rotor speed 99 000 rpm Maximum air flow rate of compressor 110 m³/min Maximum pressure of compressor 900mbar Maximum vacuum created by the vacuum pump -800mbar Power supply 380V, 3Ph, 50Hz Power input 6 kW Dimensions 1330 х 770 х 1440 mm Weight 265 kg

Condition: good (used), -Testing device for electrical equipment Bjdpfx Ajb A Ivzedrjdb -each with isolation transformer -Number: 7 available -Price: per piece

Condition: excellent (used), Year of construction: 2007, max. wheel diameter 400 mm weight of the machine ca. 4 t Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : KLINGELNBERG Single- and double-flank rolling test machine with structure-borne sound testing model R 30 year 2007 _____ Workpiece outer diameter min. / max. 36 / 300 mm Center distance between workpiece and counter wheel 135 - 290 mm Spindle speeds max. 3.000 rpm Drive torque max. up to 2196 rpm 20 Nm Drive torque max. 2196 – 3.000 rpm 14,7 Nm Spindle drive 4,62 kW Total drive approx. 10 kW - 400 V - 50 Hz Total weight approx. 4.000 kg Accessories / Special Features: • The machine is a universal rolling tester designed for the following testing procedures: o Single-flank rolling test o Double-flank rolling test o Structure-borne noise testing in single and double-flank contact o Helix testing in double-flank contact • WINDOWS PC control for measurement data acquisition and analysis with the NoisyS32 testing software • SIEMENS control panel for operating the machine and evaluating the test cycles • Complete enclosure with electrically monitored sliding doors • Attached control cabinet, various accessories, operating instructions • Unfortunately, the license dongle for activating the measurement software is currently missing. We hope to receive it from the supplier of the machine. Condition : very good condition ! Almost unused ! Soon : Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Bdjdpfexvdryjx Adrjb Payment : 100 % Net, after conclusion of contract, before loading We always have a large selection gear machines – CNC or conventional - available. Please let us know your requirements.

Year of construction: 2021, condition: like new (used), (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. Bjdpfowurq Rex Adrsdb All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. Bedpfewurqkex Adrsdb No private sales.

Condition: used, This listing is for the Bio-Rad VARIANT II hemoglobin testing system The unit is in full working condition and is ready for immediate use The Bio-Rad VARIANT II is a high-volume, fully automated hemoglobin testing system. It is primarily used in clinical laboratories to measure HbA1c for diabetes monitoring and to detect -thalassemia and other hemoglobin disorders Automated Sampling: It accepts barcoded primary specimen tubes directly, eliminating the need for manual sample preparation. Multi-Analyte Testing: It can switch between different testing methods, such as a 3.5-minute program for HbA1c and a 6.5-minute program for thalassemia. Variant Detection: It is designed to provide accurate results even in the presence of common hemoglobin variants like HbS, HbC, HbD, and HbE. Bedpjyt Idvjfx Adredb Data Management: Results and chromatograms are managed through Bio-Rad’s Clinical Data Management (CDM) software, which can interface with a lab's information system (LIS) for real-time reporting.

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: 052302303, Bobst Easypress 142, for the format 102x142cm to carry out models, test punching, preparation work for the production machine. excellent condition, year of construction 1997 Bedpfxeuk I Nxo Adrodb

Condition: used, max. wheel diameter 0 mm gear width 0 mm max. module 40 min. module 1 weight of the machine ca. 0,05 t dimensions of the machine ca. 0,5x0,3x0,3 m Bsdpfx Adovn Unyeredb pitch and run-out tester unit for gear measuring machines.

Condition: excellent (used), CTS Type: CSR-60/810/S Temperature & Climate Air Conditioning Unit, Air-Cooled CTS Climate Test System CSR-60/810/S | –60°C to +170°C 39.6 kW | Test Chamber 1200 L Description: For sale is a professional climate and temperature testing system manufactured by CTS GmbH, comprising a conditioning unit type CSR-60/810/S and an external test chamber (1200 liters). The system is ideally suited for industrial, R&D, and laboratory applications, e.g., for automotive, electronics, component, and material testing. It enables precise temperature and climate simulations across an extremely wide operating range. This is a professional climate and temperature conditioning system from CTS GmbH, including: • Conditioning unit (CSR-60/810/S) • External test chamber (1200 L chamber) The system is designed to supply external test rooms or chambers with precisely controlled temperature and humidity. Typical applications include industrial, automotive, electronics, material, and component testing (environmental simulation, stress screening, endurance testing). Technical Data (from nameplate & manual) General: Manufacturer: CTS GmbH, Hechingen Type: CSR-60/810/S Year of manufacture: 07/2019 Temperature & Climate Temperature range: –60°C to +170°C Humidity range: 10% to 80% RH Dew point range: +5°C to +74°C Electrical Data: Rated voltage: 400 V / 3-phase / N / PE / 50 Hz Rated power: 39.6 kW Rated current: 64.9 A Recommended fuse protection: 80 A slow-blow Connection type: Hardwired Refrigeration System Refrigerants: Pre-cooling stage: R452A (17.0 kg) Cooling stage: R23 (5.3 kg) Compressor: Bitzer (cascade system) Protection class: Conditioning unit: IP54 Test chamber: IP22 Dimensions & Weight: Conditioning unit: Dimensions (W x D x H): approx. 1,200 × 1,100 × 2,200 mm Weight: approx. 1,200–1,500 kg 1200 L Test Chamber: Dimensions (W x D x H): approx. 1,600 × 1,400 × 1,600 mm Weight: approx. 600–800 kg Total system weight: approx. 1.8–2.3 t Buyer Safety Information! Bedpfx Adoya Ev Nsrjdb The following steps are always carried out on our offered chambers before sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (see pictures) (subject to change and errors in technical data and specifications!) Additional questions can gladly be answered over the phone.

Condition: excellent (used), functionality: fully functional, Metso lokotrack hydraulic testing unit. Capable of full testrun for Metso Lokotack crushers. Included with Metso PLC control. Bdedpjygk Htefx Adrjb 400V/63A.

Condition: excellent (used), Primus Engineering Type: DST 350 This test device was designed to carry out IP protection class tests “dust” according to e.g. DIN 40050 Part 9 and DIN EN 60529. The test device is intended for testing technical components under the influence of dust and negative pressure within the limits specified in the technical data. Operation / HMI Bdsdpjrt U Nuofx Adrob Control panel with screen and buttons Manual controllers Stored test sequences Integrated vacuum circuit with flow measurement Technical data: Total electrical output: Max. 5 KW Connection voltage: 400V/50HZ 3-Ν/ΡΕ (16AEEC socket) Dimensions: Width approx. 920 mm Depth approx. 710 mm Height approx. 1,770 mm Dimensions of test chamber: Width approx. 700 mm Depth approx. 650 mm Height approx. 770 mm Volume approx. 350 I Mass: approx. 200 kg Vacuum: 0 to -100 mbar Suction air flow: 0 to approx. 5 l/min Working climate range: Temperature: +12 °C to +30 °C Humidity: 25% rel. H. to 75% rel. F., non-condensing Protection class tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Dust test: Dust-protected ΙΡ5Χ and IP5KX Dust-tight ΙΡ6Χ and IP6KX with and without vacuum Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, functionality: fully functional, Rotary testing machine for testing transformers 8 stations Testing stations for: voltage, input/output current (mA), high voltage, pad printing Bodpfoyl Adzsx Adrsdb Test adapters for all common EI transformers included

Condition: excellent (used), Year of construction: 1975, Breaking device . bar material dia. 10 - 45 mm bar material stranggepreßte NE-Stangen weight of the machine ca. 3 t Bending and breaking device simple and sturdy device to detect internal flaws in extruded non-ferrous metal rods Bjdoit Ev Tspfx Adredb +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Materials Testing Machine 20 kN Tensile & Compression Testing testXpert III For sale is a high-quality Zwick / Roell materials testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. Control is via PC using Zwick/Roell testXpert III software (data carrier & documentation included). Technical Data: Rated test force: 20 kN Test direction: tensile & compression Power supply: 230 V / 50–60 Hz / single-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical data (according to documentation & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: tensile & compression Max. test frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight: Total height: approx. 1,545 – 2,114 mm (depending on crosshead position) Total width: approx. 856 mm Total depth: approx. 650 mm Working area width: 440 mm Weight: approx. 150 kg (base unit) approx. 180 kg with typical configuration Electrical Data Power supply: 230 V AC Phases: single-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Plug: Schuko (CEE 7) Bjdpex Up Igjfx Adrsdb Measuring & Control Electronics: Internal data acquisition: 500 Hz Data transmission to PC: adjustable 10–100 Hz Interface: RS232 (COM) Electronics housing protection class: IP32 Important note: 'The table shown in the photos is not included in the sale.' Condition: used Scope of delivery: (see picture) - Zwick / Roell materials testing machine (20 kN) - Electronics unit - PC workstation (monitor, PC – please see photos for condition) - 2 measurement modules (Delock units) - Zwick/Roell testXpert III software (data carrier) - Original operating and technical documentation - Various connection and interface cables (Specifications are subject to change and errors excepted!) If you have any questions, we will be pleased to assist you by phone.

Condition: used, Year of construction: 1997, Technical details: max. wheel diameter: 5 - 350 mm max. module: 20 weight of the machine ca.: 0,8 t min. module: 0,5 dist. between centers: 5 - 750 mm table diameter: 260 mm z-axis: 600 mm Bedpfxjx Uzvvj Adrodb y-axis: 185 mm max. helix angle: 45 °

Condition: used, Test pump, pressure test device, measuring device, pressure test pump Bsdpfx Adofnaaiersdb -Manufacturer: Junginger, mobile extraction device -Pressure display: 40 bar -Dimensions: 790/480/H775 mm -Weight: 47 kg