Used Testing for sale (9,814)

Condition: excellent (used), Heraeus Vötsch Type: VTS 7018-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 2.0 K Temperature change rate (cooling): 6.5 K/min Temperature change rate (heating): 7.5 K/min Heat compensation: 4,500 W Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm External dimensions: Width 870 mm x Depth 1,280 mm x Height 1,575 mm Viewing window: Width 300 mm x Height 540 mm Test chamber volume: 190 liters Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10 kW Rated current: 21 A Supply-side fuse: 32 A slow-blow Sound level at 1 m distance (free-field measurement): < 63 dB(A) Lateral port: 50 cm / 125 cm Chamber is water-cooled Refrigerants: R452A and R23 Weight: approx. 460 kg Important safety information for buyers: The following procedures are carried out on all chambers offered by us: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, all chambers are subjected to a documented trial run. Condition: used Scope of delivery: (see photos) (Technical data and specifications subject to change and errors!) If you have further questions, we are happy to provide information by phone. Bjdpfx Ajyu Rhgjdrjdb

Year of construction: 2001, condition: used, Erichsen Universal Sheet and Strip Testing Machine Model 145-60 Condition: Used Year of manufacture: 2001 Technical Specifications Hydraulic drive Motor power max.: 11.5 kW / 1500 rpm Pump output (small pump circuit): 12.3 dm³/min Pump output (large pump circuit): 31 dm³/min Test cylinder Punching force: 665 kN / 160 bar Hydraulic test head opening Max. operating pressure: 95 bar Holding pressure: 50 bar Drawing force ranges, switchable Bdjdpfx Adoyr R Uhjrob Small drawing force range: 37 kN / 10 bar Medium drawing force range: 225 kN / 60 bar Large drawing force range: 600 kN / 160 bar Max. drawing stroke: 150 mm Max. drawing speed: 750 mm/min Drawing ram stroke display: Resolution 0.1 mm Electrical connection values Power supply: 400 V three-phase, 50 Hz Fuses: 25 AT and 35 AT Ambient operating temperature: between +5° and +50° C Dimensions, weight Dimensions (L/W/H): 1800 mm / 1320 mm / 1400 mm Net weight: approx. 2400 kg

Year of construction: 2017, condition: good (used), evopro test bench for printed AmbientLight modules P585 Manufacturer: evopro systems engineering AG Description: Test bench for printed AmbientLight modules Project no.: P585 Serial number: 0001 Year of manufacture: 2017 Power supply: 230 V / 50 Hz / 13 A (L+N+PE) Design: Enclosed test bench for printed AmbientLight modules Structure: Aluminium profile frame with complete test cabin Application: Optical and functional testing of lighting and AmbientLight components Bsdeyrnazspfx Adrjdb Location: Schierling Inspection possible by appointment.

Condition: good (used), Year of construction: 2007, max. wheel diameter 500 mm gear width 200-400 mm module 12 Bdedpfxjvr Hf Eo Adrsb turning speeds 0-3250 U/min bracke pressure bis max. 95 Nm inner taper Konus #39 Control Fanuc 16 total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 2.350 x 2.240 x 2.500 mm HIGHLY FLEXIBLE TESTING OF HARD, FINISHED AND GREEN SPIRAL BEVEL AND HYPOID GEAR SETS The T 60 bevel gear testing machine is a CNC testing machine with three linear axes for the fully automatic hard and soft testing of spiral bevel and hypoid gear sets with a 90° axis angle. It offers versatile objective and subjective testing options with speeds up to 3,250 min and braking torques up to max. 95 Nm.

Condition: excellent (used), CTS CW‑60/5.5 – Water-Cooled Climate Test Chamber The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a mid-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Equipment Description This climate test chamber allows you to assess the function or material properties of test objects under controlled temperature and humidity conditions. Efficient air circulation with a high re-circulation rate ensures excellent transfer to the test goods. The air handling system is located at the rear of the inner chamber. All of the aggregates are mounted in a separate frame behind the unit, providing easy access. The control system is housed in a separate switch cabinet, while the user interface is integrated into the cabinet door. To dehumidify the test chamber, it is equipped with a self-regenerating compressed air dryer. Fresh air can be supplied by a blower to purge the chamber as required. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear with test specimen and radiant heat, measured at supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity (dew point range +5°C to +89 °C) - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3 % r.h. over time Bsdpfxox Eabps Adrjdb Technical data based on ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: Internal dimensions (test/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height 2300 mm, Width 1600 mm, Depth 1550 mm External dimensions: - Height 2800 mm, Width 2250 mm, Depth 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection category: IP 54 Technical Design: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless power adjustment via electronic monitoring and control system - Environmentally friendly refrigerants: R 23 / R 404 A Notes: - Inspection possible by appointment (46325 Borken) - Shipping by freight forwarding possible – costs & organization on request - Scope of delivery: (see picture) - (Subject to modifications and errors in technical data, all information provided without guarantee!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS CW-60/5.5 – Water-cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in and drive-in climatic chamber designed for simultaneous temperature and humidity testing on multiple test specimens. Device Description The climate test chamber allows for functionality or material property testing of a test item under the influence of temperature and humidity. Efficient air circulation with a correspondingly high level of recirculating air volume ensures excellent transfer to the test item. The air treatment compartment is located at the rear of the test chamber. The aggregates are positioned behind the unit in a separate frame for easy access. The control system is integrated into a separate control cabinet. The control panel is mounted in the door of the control cabinet. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The test chamber can also be purged with fresh air via an internal blower. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate, linear with specimen and heat radiation, measured in supply air: - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% rH - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 – ±3% rH over time Technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test item, without external radiation and without additional devices. Dimensions: Internal dimensions (test space/usable volume): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External dimensions: Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A - Protection rating: IP 54 Bsdpfxox Eaxbe Adrsdb Technical Execution: Refrigeration unit: Water-cooled, low noise, semi-hermetic, infinitely variable capacity adjustment via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Notes: Inspection by appointment possible (46325 Borken) Shipping by forwarding agent possible – Costs & organization upon request Scope of delivery: (see photo) (Subject to change and possible errors in the technical data; information provided without liability!) For further questions, we are happy to assist you via telephone.

Condition: excellent (used), CTS CW-60/5.5 – Water-cooled Climatic Test Chamber The CW-60/5.5 by CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber for conducting temperature and humidity tests on multiple test specimens simultaneously. Device Description The climatic test cell enables testing of the functionality or material properties of a specimen under the influence of temperature and humidity. Optimized air circulation with a high recirculation rate ensures effective climate transfer to the test specimen. The air conditioning compartment is located at the rear of the interior chamber. The units are housed in a separate frame behind the main device and are easily accessible. The control system is installed in a separate control cabinet, and the control panel is integrated into the cabinet door. For dehumidification, the test cell features a self-regenerating compressed air dryer. Fresh air can be flushed into the test chamber using a fan. Technical Specifications: Temperature Tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate, linear with specimen and radiant heat, measured in supply air: - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Tests: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% r.H. - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3% r.H. over time The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimen, no radiant heat, and without additional equipment. Bodpfx Aox D Abpedrodb Dimensions: - Interior (Test chamber / usable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2300 mm, Width: 1600 mm, Depth: 1550 mm - External dimensions: Height: 2800 mm, Width: 2250 mm, Depth: 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A - Protection class: IP 54 Technical Design: - Refrigeration unit: water-cooled, low-noise, semi-hermetic - Infinitely variable capacity adjustment via electronic monitoring and control system - Environmentally friendly refrigerants: R 23 / R 404 A Additional Information: - Inspection possible by arrangement (46325 Borken) - Shipping by freight carrier is possible – costs & arrangements upon request - Scope of delivery: (see picture) - (Changes or errors in technical data reserved) - For further questions, we are happy to answer your call.

Condition: excellent (used), Here we offer a Feutron climate test chamber. Feutron Climate Test Chamber Temperature Temperature range: -40...90°C Climatic range (without heat load): 10...85°C Temporal temperature deviation during temperature operation: ≤ ± 0.5 K/min Temporal temperature deviation during climatic operation: ± 1.0... ± 1.5 K/min Change rates Heating: avg. 2.0 K/min Cooling: avg. 2.0 K/min Standard IEC 1646 is achievable with testing, solar modules up to max. 160kg weight and nonlinear ramps (setpoint jump) Drying Air drying: condensation drying Humidity Air humidification: steam humidification Humidity range: 10...95 % r.h. Temporal humidity deviation: ≤ ± 3.0... ±5.0 % r.h. Dew point range: 8...80.9°C Test Chamber Test chamber volume: 7.0 m³ Dimensions Internal dimensions: Width 1500 mm x Height 2250 mm x Depth 2000 mm Swing door DIN right, heated, Width 900 mm x Height 2100 mm Bdedpeklv H Iefx Adrjb Observation window, heated, with blackout shutter and lockable: Width 500 mm x Height 600 mm Feedthrough: 2x, right front side, Ø 75 mm Irradiation unit, test chamber Opening: 4x in left side wall for SC 2500, each 850 x 700 mm Irradiated area when using SC 2500: 1200 x 1200 mm Radiation intensity at 1.0 m wall distance: 1000 ± 10% W/m² Lighting: 1x halogen lamp, 200W Refrigeration system: Bitzer compressor, semi-hermetic, 2-stage, air cooled Condenser: split condenser (outdoor installation, winter control) Refrigerant: R507 / R23 Temperature control system Coolant medium Tyfocor / water Mixing ratio 50/50% Coolant density: 1.072 kg/dm³ Filling quantity: approx. 80 dm³ Pyranometer Temperature range: -40...150°C Max. radiation absorption: 4000 W/m² Spectral range (50% points): 305...2800 nm Sensitivity (nominal): 7 µV/W/m² Power supply, test chamber Mains connection: 400V, 3/N/PE, AC, 50Hz Connection type: hardwired Max. simultaneous power demand: approx. 32.0 kW Supply fuse: 3 x 63, Char C (A) Power supply, SolarConstant Mains connection: 400V, 3/N/PE, AC, 50Hz Connection type: Max. simultaneous power demand: approx. 30.0 kW Supply fuse: 3 x 63, Char C (A) Overall external dimensions of the test cell including: equipment room/control cabinet and control cabinet for SolarConstant 2500 External dimensions equipment room: Width 3440 mm x Height 2580 mm x Depth 2950 mm /control cabinet: Width 2200 mm x Height 1830 mm x Depth 1100 mm External dimensions condenser, split: Width 900 mm x Height 950 mm x Depth 2000 mm Weight test chamber (total): approx. 2700 kg Condenser empty weight: 153 kg Weight: 2700 kg Type: 3707/06 Condition: used Scope of delivery: (see picture) (Technical data and information are subject to change and errors!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS Type: TW-60/9 Water-cooled temperature test chamber CTS Temperature Test Chamber Type TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature of -60°C 9 stands for: 9 m³ test chamber volume Technical specifications: Cooling unit: - Water-cooled, low-noise, semi-hermetic - Continuously variable capacity adjustment via electronic monitoring and control system Bodpfx Adjvb Hanjrsdb - Environmentally friendly refrigerant R23 / R404A Control system: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numerical input of set values - Error messages in plain text - RS 232 interface - Free switching channels for customer-side test sample control Technical performance data: Temperature testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.1 to 0.5 K over time - Temperature change rate (measured in supply air, including test load and heat radiation): Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C - Test load: 420 kg solar cell modules, following 100% - Heat radiation: 3000 watts permanent The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test load, without heat radiation, and without additional equipment. Dimensions: - Test volume: 9 m³ - External dimensions (approx.): width 4140 mm, depth 2680 mm, height 3000 mm - Internal chamber dimensions (approx.): width 1600 mm, depth 2400 mm, height 2200 mm Operating data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 48.9 kW - Nominal current: 74.9 A - Protection class: IP 54 - Cooling water connections: supply/return R1 ¼", internal thread - Condensate drain, non-pressurized: R1", internal thread - Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and errors!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS Model: TW -60/9 Water-cooled temperature test chamber CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specifications: Cooling unit: - Water-cooled, low noise, semi-hermetic - Stepless capacity control via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Control: - 32-bit controller - LCD operating panel - Digital display of set and actual values - Numeric input of set values - Fault messages in plain text - RS 232 interface - Free switching channels for external test item control Technical Performance Data: Bdodpfxovb E Uqe Adreb Temperature tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ± 0.1 to 0.5 K (over time) Temperature change rate, average with test specimens and under radiant heat, measured at air intake: - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test item: 420 kg solar cell modules, 100% load - Radiant heat: 3000 W permanent Technical data based on ambient temperature +25 ​​°C, nominal voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: - Test chamber volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber internal dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating Data: - Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz - Rated power: 48.9 kW; Rated current: 74.9 A - Protection class: IP 54 - Cooling water connections: feed/return R1 ¼”, internal thread - Condensate drain unpressurized R1” internal thread - Weight: approx. 5609 kg Condition: used Delivery contents: (See image) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: excellent (used), CTS CW-60/11 – Water-Cooled Climatic Test Chamber The CW-60/6 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for performing temperature and humidity tests on multiple test specimens simultaneously. Device Description This climatic test chamber allows testing of the function or material properties of a test object under the influence of temperature and humidity. Excellent air circulation with a correspondingly high recirculation volume ensures effective transfer of conditions onto the test object. The air-handling compartment is located at the rear of the interior chamber. The aggregates are positioned behind the unit in a separate frame, providing easy access. The control system is housed in a separate control cabinet, with the control panel installed in the cabinet door. For dehumidification of the test chamber, the unit is equipped with a self-regenerating compressed air dryer. Fresh air can be flushed into the chamber via a blower. Technical Specifications: Temperature Testing: - Temperature range: –60°C to +90°C - Temperature deviation: ±0.5 to 1 K (over time) - Spatial temperature deviation: ±1 K at 200 mm from the wall - Rate of temperature change (supply air, linear): - Heating: 2 K/min from –40°C to +85°C - Cooling: 2 K/min from +85°C to –40°C Climatic Testing: - Temperature range: +10°C to +95°C - Humidity range: 10% to 95% RH - Dew point range: +5°C to +89°C - Temperature deviation: ±0.5 K (over time) - Humidity deviation: ±2 – ±5% RH (over time) - No heat irradiation - Stabilized conditions Technical data relate to an ambient temperature of +25°C, rated voltage 400 V, without test objects, without irradiation, and without additional equipment. Dimensions: Interior (Test chamber / usable space): - Volume: approx. 11,000 liters (11 m³) - Internal dimensions (approx.): Width: 2,100 mm / Depth: 2,530 mm / Height: 2,200 mm (slight variations depending on configuration) External dimensions: - Width: 2,700 mm / Depth: 5,200 mm / Height: 2,520 mm (variations possible depending on door type, frame, accessories, etc.) Bsdpox Anipsfx Adrodb Operating Data: - Rated power: 84.4 kW - Rated voltage: 400 V 3/N 50 Hz - Rated current: 131.4 A Technical design: - Refrigeration unit: Water-cooled, low-noise, semi-hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R23 / R404A - Weight: 6,000 kg Notes: - Inspection/viewing possible by arrangement (46325 Borken) - Shipping by carrier is possible – costs and arrangements on request - Scope of supply: (see picture) - (Changes and errors in the technical data reserved; all information is subject to change!) If you have any further questions, please feel free to contact us by phone.

Condition: as good as new (ex-display), Product description: STAHLWILLE - Electronic Workshop Testing Device SENSOTORK 7707-2W ----- Condition of the item: New & unused. Storage marks possible. Bdedpfeyyxztsx Adrjb Internal number: 26.313 - P4.3

Condition: used, Year of construction: 2018, Nominal power in kilowatts 7,7 MW Maximum power 8,47 MW Nominal turning speed 1150 1/min Maximum turning speed 2200 1/min Nominal torque 63940 Nm Maximum torque 70330 Nm 8 MW test bench for gears, closed loop Bsdpsrr Ammjfx Adredb

Condition: excellent (used), Year of construction: 2022, Binder BINDER KB 720 Cooling Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device description: For sale is a BINDER KB 720 (E6) Cooling Incubator, year of manufacture 2022, equipped with the advanced safety and performance test package "P Plus". This device is not a standard laboratory incubator, but a high-quality safety test chamber specifically designed for aging, performance, and safety testing of lithium-ion energy storage systems. Special added value: The unit is designed to reliably detect, monitor, and safely contain critical battery events – up to EUCAR Hazard Level 5 (fire/flames, no explosion). What can the unit do? (Section 2 – Performance & Applications) - Aging tests on lithium-ion cells - Performance tests (charge/discharge cycles under temperature) - Continuous temperature runs and thermal cycling tests - Testing of unpowered and cyclically powered cells - Reproducible, precise temperature control throughout the usable space - Safe execution of tests under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage technology Suitable for: - Battery & cell manufacturers - Research and development laboratories - Test labs & safety testing - Automotive / e-mobility / energy storage sectors The P Plus package turns the KB 720 into a genuine battery safety test chamber: Integrated safety features: - Automatic & manual CO₂ fire suppression system - Fire detector with optical and acoustic alarm - Mechanical double-door locking mechanism (secure containment) - Spark protection inside the chamber - Exhaust nozzle with reversible overpressure flap - Ports for external inerting (e.g., nitrogen) - Emergency shut-off / manual activation of the extinguishing system - Ports for charging and measuring cables Result: The unit is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, where fire or flames may occur without the risk of explosion or uncontrolled spread. It is not an abuse or destruction test chamber, but a reliable, standards-compliant test cabinet for realistic operational and fault scenarios. Technical core data: - Temperature range: –10 °C to +100 °C - Interior volume: approx. 698 liters - Shelves: 4 × stainless steel - Max. load per shelf: 45 kg - Max. total load: 100 kg Electrical data: - Power supply: 200–240 V AC - Frequency: 50 / 60 Hz - Phase: single-phase - Power consumption: approx. 2.1 kW - Fuse: 16 A - Refrigerant: R134a - Protection rating: IP 20 Dimensions & weight: - External (W × H × D): approx. 1250 × 1950 × 900 mm - Internal (W × H × D): approx. 970 × 1250 × 576 mm In summary – why this unit is exceptional: - Genuine battery safety test chamber - Suitable for EUCAR Hazard Level 5 - Integrated CO₂ extinguishing system Bjdpjx Hf A Refx Adrjdb - Large chamber (≈700 l) - High market and resale attractiveness - Weight: approx. 285–300 kg Condition: used Scope of delivery: (see photo) (Subject to modifications and errors in technical data. All information is without guarantee!) If you require further information, please don't hesitate to contact us by phone.

Condition: ready for operation (used), Emco Test M4C 025 Universal Hardness Tester Hardness Testing Machine Test force range: 9.8-2450N Test height: 260 mm Throat depth: 200 mm Max. workpiece weight: 50 kg Dimensions: 250 mm x 1055 mm x 750 mm (W x H x D) You are welcome to arrange an inspection appointment. We can also organise cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be provided, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop to see our other offers as well. All company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Bdjdpfsyybt Eox Adrsb Deviations from technical data or errors in the description of the item may occur and are subject to change.

Year of construction: 2017, condition: used, functionality: fully functional, II. TEMPERED GLASS STRESS MEASUREMENT DEVICE TYPE JF-1 (GLASS SURFACE STRESS METER TYPE JF-1). The JF-1 device is designed for quality control of tempered glass by means of non-invasive measurement of external surface stresses. The complete set includes: PDA display, optical head, power supply, UV sensor, refractive fluid, USB cable, reference sample, software, and user manual. Additionally, 50 ml of refractive fluid is included. Condition: used, functional. Bdedpfxew T Rq Sj Adrsb

Condition: not inspected (used), functionality: unexamined, plate length: 630 mm, plate width: 630 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item on time, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Plate dimensions: 630 mm x 630 mm MACHINE DETAILS Bdjdpfxjyn H Hls Adrob Dimensions & Weight Dimensions (L x W x H): 630 x 630 x 950 mm Weight: 150 kg External reference: Pieper - Lot 75

Year of construction: 2011, condition: used, functionality: fully functional, Universal Testing Machine Inspekt Table Blue 5 kN Mechanical Design: - 2 backlash-free ball screw spindles, driven by a DC servo motor, Fmax = 10 kN, stiffness 10 kN/mm - 1 test space up to nominal load: - Test space width: 420 mm - Max. test stroke without test tools, adapters, and KMZ: 1025 mm Travel Speeds: - Test speed: 0.0015 – 1000 mm/min at full load - Return speed: 1000 mm/min Force Measurement: - Measuring range: 0.8 – 100% of nominal load, Class 1 (optionally Class 0.5) (+/- 1% of the displayed value according to DIN EN ISO 7500-1) - Force measurement resolution: +/-180,000 digits at 20 ms integration time The machine is delivered with a factory test certificate. If factory or DKD calibration at the installation site is requested by the customer, this will incur additional costs. Crosshead Travel Measurement: - Incremental square-wave input with encoder monitoring, saves crosshead position - Crosshead travel resolution: 1 μm Dimensions (W x D x H) / Weight: - Load frame: 685 mm x 550 mm x 1420 mm / 100 kg – controller mounted on the load frame Standard Functions: - Force, displacement, and strain control - Overload protection, automatic force calibration - Specimen break detector, return function - Set-up mode via control panel with display (force, displacement) Data Processing: - USB 2.0 interface or LAN - Data transfer rate to PC: 50 Hz (standard); optionally, higher data acquisition frequency via special software add-on module - Internal data processing rate: 2 ms - Optional: up to 2 free slots for expansion cards (1-channel analog cards or 2-channel digital cards) for additional sensors Power Supply / Operating Conditions: - 115/230 VAC, 0.5 kVA, 50/60 Hz, 5–40°C, 20–80% humidity - Required options for operation: load cell, grips, PC (current standard, OS 8-10-11), test software Bdodpfx Adeyyu I Nsrsb 5000 N Load Cell - Measuring range: 5–5000 N for tension and compression, with nominal 2 mV/V output signal - Overload protection: +/-100% - Linearity: +/-0.05% - Hysteresis: +/-0.03% - Repeatability: +/-0.02% - Incl. 1.5 m connection cable and calibration certificate Supplied with Extensometer MFX 200 The MFX 200-B extensometer, with its robust construction and high measurement accuracy, is suitable for almost all specimens with an initial gauge length from 10 mm. All strains can be measured, from the modulus of elasticity up to specimen break. It can be used unrestrictedly in both the lower and upper test areas. In combination with the MFQ-A, r- and n-value measurements on sheet metal are also possible. Two different measurement systems are available, differing in their signal and technical specifications (see technical documentation).

Condition: excellent (used), RMS Electrodynamic Vibration Test System Vibration Exciter SW 3006+ Power Amplifier TGA 1500 Technical Data: Sine: 3.7 kN Random: 3.7 kN Shock: 3.7 kN Stroke pk-pk: 26 mm Velocity: 0.9 m/s Bdsdpjhyly Rjfx Adrsb Acceleration: 80 g Cooling: air-cooled Condition: used Untested! Testing was not possible Scope of delivery: (see picture) (Changes and errors in the technical data may apply!) We are happy to answer further questions by phone.

Condition: excellent (used), RMS Type: SW 3509 + TGD 6000-000.00 amplifier and fan RMS Electrodynamic Vibration Test System Technical data: Sine: 7.5 kN Random: 6.7 kN Shock: 13 kN Displacement pk-pk: 25.4 mm Velocity: Sine 1.5 m/s Random 2.5 m/s Shock 2.5 m/s Bjdjhylymopfx Adrjdb Acceleration: 100 g Cooling: Air-cooled Total weight approx. 4000 kg Condition: used Scope of delivery: (see image) (Changes and errors in technical specifications reserved!) We are happy to answer further questions by phone.

Condition: used, Year of construction: 2001, max. wheel diameter 400/500 mm CNC-Control GE FANUC Series 160i-M pinion diameter - max. 400 mm crown gear diamter max. 500 mm x-axis +/- 70 mm y-axis 200 mm z-axis 200 mm axis angle 90 Grad speeds: R T min rated current 30 kVA weight of the machine ca. 6,2 t dimensions of the machine ca. 3,2 x 2,5 x 2,3 m The Oerlikon T50 is a 3-axis CNC testing machine for fully automatic hard and soft testing of spiral and hypoid bevel gears with an axle angle Bdedpfx Adoyv Iplorjb of 90° Bevel gear analysis ROTEC T50 GA2 Color unit company Binks

Year of construction: 1998, condition: excellent (used), Waste oil test bench Make SWEP Model B 5x10 dimensions LxWxH 115x105x115 cm Weight 132 kg Bedsh Rnq Tjpfx Adrsdb

Condition: good (used), Year of construction: 2013, Helium leak detector Manufacturer: Leybold Type: Phoenix L300i Condition: very good! Connection: 230V Bdedpot Uru Tofx Adrjb Delivery time: ex stock (u.ü.V.)

Condition: like new (used), Year of construction: 2022, Helium leak detector Manufacturer: Leybold Type: Phoenix Quadro EU Condition: As good as new Ready for use from 2022 unused Connection: 230V Delivery time: ex stock (u.ü.V.) Bodpfx Ast Urlrjdrsdb

Condition: used, Test console, test station, measuring station, test device, measuring instrument, tester for HV, PE, and IS measurements ELABO Type PE/IS/HV SCT 42 / 91-3J.3 + 90-1V + 90-9B.3ZM92510 High-voltage tester The PE/IS/HV SCT 42 / 91-3J.3 is used for testing dielectric strength, insulation resistance, and protective earth voltage drop in accordance with VDE0113 or IEC regulations per EN60204, Part 1. Serial No.: 0064016 Year: 2004 Rated voltage: 230 VAC Rated frequency: 50 Hz Bdedpfof Axn Aox Adrob Rated current: 6.3 A - Protective earth resistance measurement - Insulation resistance measurement - Protective earth voltage drop measurement The 90-1V unit provides a highly stable DC voltage with low ripple. One output terminal supplies the high voltage, while the other is near earth potential and can be set to a potential of up to 300 V. Device No.: 90-7WZ006 Year: 2000 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A Interference suppression: according to VDE 0871 Rated power: 14 watts Output voltage: 0 - 6.0 kV DC Output current: 0 - 2 mA Connection unit for ELABO testers, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial No.: 0097588 Year: 2009 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Compact unit on mobile frame - Various connection cables and accessories as shown Overall dimensions (L x W x H): 580 x 700 x 1380 mm Total weight: 100 kg Good condition Many other ELABO devices under stock numbers 57819, 57820, and 57821