Used Kiefel for sale (9)

Year of construction: 2011, operating hours: 35,000 h, condition: ready for operation (used), This KIEFEL KLS 86/235 was manufactured in 2011. It features a maximum forming area of 860 x 2350 mm and a maximum forming part height of 350 mm. The machine is equipped with a powerful vacuum system with a suction power of 2 x 300 m³/h. If you are looking to get high-quality laminating capabilities, consider the KIEFEL KLS 86/235 laminating system we have for sale. Contact us for further details. • Operating voltage: 3 x 400V + N + PE / 50 Hz • Connected load: 225 kVA • Nominal current: 264 A • Preliminary fuse: 315 A • Short-circuit strength: 50 kA • Control voltage: 24 VDC • Max. forming area: 860 x 2350 mm • Min. forming area: 340 x 1200 mm • Max. forming part height: 350 mm • Film level: 1805 mm • Max. lower table stroke: 1330 mm • Max. upper table stroke: 585 mm • Rotary upper table: 4-part (Forming / Punching) • Punching force upper table: 30 kN • Punching counterforce lower table: 30 kN • Operating pressure: 6 bar • Compressed air requirement: approx. 300 Nl/cycle • Max. roll diameter: 600 mm • Max. film width: 1100 mm • Max. film roll weight: 400 kg • Coil diameter max: 76 mm • Vacuum system suction power: 2 x 300 m³/h • Vacuum system power: 7.6 kW • Tank volume: approx. 1000 L • Side channel blower suction: 14 m³/min • Side channel blower power: 8.5 kW Ijdpfxey Rprqe Am Doat • Feed width chain rails: max. 940 mm

Condition: used, Year of construction: 2002, Kiefel KMD 75 BFSS Universal Automatic Roll-Fed Thermoforming Machine, Forms, Punches & Stacks Formed Containers, Sheet Width Approx. 700mm, Infeed Roll Feeder KVH83, Oven, Machine Platen Size 590 x 900mm, Outfeed Scrap Reel, ICS IC410 3 Fan Chiller Unit. Serial No. 203-031 (2002). Country of Origin: Germany Iaodoy Shbyspfx Am Dst Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 202-052, film width: 570 mm, type of input current: three-phase, pressure: 6 bar, total width: 25,800 mm, total length: 82,200 mm, total height: 22,800 mm, Thermoforming machine used,functional for PET,PS,PP. Iajdpfxerh E Ibj Am Dst The machine is still in production mode, but is available immediately.

Year of construction: 2004, condition: ready for operation (used), Connected load: 104kVA, operational hours counter: 18,775h, the chain of the chain rail system was replaced in 2018. Iaodpfx Amsl Ax Tvs Djt

Condition: used, We are selling a well-maintained generator from Kiefel. The generator and tubes have few operating hours. The rotary table shown in image 1 is no longer available. Iajdpsw Hdzlefx Am Dst

Condition: ready for operation (used), Year of construction: 2001, A complete 5-layer coextrusion blown film line with 5 extruders and all peripheral equipment is available. Total line dimensions X/Y/Z: 14m/22m/11m, blow head: Kiefel Worms FSBK 500 with IBC, die diameter: 500mm, film width range: 700mm-2000mm, haul-off width: 2000mm, winding width: 2000mm, line speed: 120m/min, melting capacity: 500kg/h, total power requirement: approx. 300kW. 1) Double winder Wintech, winding width: 2000mm, film thickness range: 35µm-150µm, max. roll diameter: 1000mm, max. roll weight: 1900kg, core inner diameter: 152mm/6inch. 2) Extruder Kiefel Worms 70.29D, power: 89kW, screw: 5-zone barrier screw, speed: 125rpm, renewed: 2010. 3) Adhesive extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 4) Center extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone core progressive screw, speed: 175rpm. 5) Adhesion promoting extruder Kiefel Worms 50.25D for the outer layer, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 6) Kiefel Worms 80.25D outer layer extruder, power: 125kW, screw: 5-zone barrier screw, speed: 150rpm. 7) Reinhold SRK 200/9.6 film calibrating device. The entire line is controlled by a Plast Control system. Further components: integrated width measurement, C-scan for profile measurement, web center control, corona pre-treatment, film pre-draw. Including a replacement FSBK 5-layer blow head with IBC, replacement rollers, annular gap blower with filter, suction units, crane and external system terminal. Documentation available. On-site inspection is possible. Iaedev T An Sepfx Am Dot

Condition: new, Year of construction: 2022, functionality: fully functional, Make Kiefel Natureformer Model KFT 90 Speed Year 2022 Condition New - Machines are unopened and still in original packaging from Kiefel. Forming Area 900 x 600 mm (35.5 x 23.5 in) Max Height of Formed Part 120 mm (4.75 in) Punching Force 600 kN Isdpfxjwkkpqj Am Djat Shot Weight Max. 300g (10.5 oz) Cycle time 15 seconds +/- Machine picture shown is for example only. Machine has not been installed.

Condition: used, functionality: fully functional, High frequency welding machine Kiefel KH 6000 C-Press height adjustable Iaodpfx Amev A Udds Det Generator Kiefel G 20000 SB Table size 1350x800 mm

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Manufacturer Kiefel Model KMD 60B Year 2012 Condition Used Stock Number 00034 Approx hours 26000 Iasdpfex Ekcasx Am Det Delivery date Immediately Stations Three Max tool dimensions TBC Maximum Mould Surface 580 x 440 mm Minimum Mould Surface 260 x 250 mm Depth of draw 120 mm +/- Max film width 630 mm Max dry cycles / min 70 Operating pressure 6 bar Approx Dimensions TBC Approx Weight 10,000 kg Notes All details are subject to change and/or errors.All equipment is subject to availability and/or prior sale.