Used Thickness for sale (8,971)

Condition: new, empty load weight: 6,950 kg, maximum load weight: 24,050 kg, overall weight: 31,000 kg, axle configuration: 3 axles, loading space length: 7,500 mm, loading space width: 2,550 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Chassis: Hot-dip galvanized, wooden floor 70 mm thick, 18 lashing points, 12 pocket slots for securing cargo, 2 ramps, each 3,110 mm long x 760 mm wide, hydraulic one-piece ramps, loading height: 880 mm, incl. axle load indicators. Pedpfoz E E Rmex Alwjgt Additional options available at an extra charge: last axle as a steering axle, warning signs + lighting and rotating beacon, widening to 3 m with timber supports, hydraulic adjustment of the ramps. Also available with a K80 tow hitch! -- Subject to printing errors, mistakes and changes, sample images -- More data available at: !

Condition: new, empty load weight: 3,650 kg, maximum load weight: 6,350 kg, overall weight: 10,000 kg, axle configuration: 2 axles, loading space length: 6,250 mm, loading space width: 2,480 mm, loading space height: 2,420 mm, loading space volume: 37 m³, suspension: air, tire size: 245/70 R 17,5, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, tail-lift, Dautel DL 1500 tail lift, load capacity 1,500 kg, 4 cylinders, aluminum platform 1,800 mm long, 2 roll-off safety devices, with own batteries and charging cable, side wall thickness approx. 17 mm, , Front with portal doors for through-loading with short drive-over plate, , 2 rows of combination lashing rails, 6 pairs of lashing eyes embedded in the floor, , Rental price from 720 ¤ per month, , , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Psdpfx Aljz E E Sqowogt

Condition: new, empty load weight: 7,300 kg, maximum load weight: 26,700 kg, overall weight: 34,000 kg, axle configuration: 3 axles, loading space length: 8,000 mm, loading space width: 2,550 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Chassis: Hot-dip galvanized, 70 mm thick wooden floor, 18 tie-down points, 12 pocket slots, 2 ramps, each 3,110 mm long x 760 mm wide, climbing strip on the outside of the ramps and the rear slope, hydraulic one-piece ramps, loading height: 880 mm, incl. axle load indicators. Further options available at an extra cost: last axle as a steering axle, warning signs + lighting and rotating beacon, widening to 3 m with wooden extensions, hydraulic adjustment of the ramps. Pgedpfx Aljz E Eufewst -- Subject to printing errors, mistakes, and changes. Sample images. -- More details: !

Condition: new, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,550 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, with axle load indicator, loading platform length 9,200 mm, loaded height approx. 900 mm, 20 lashing rings each rated at 10 t, 16 stake pockets on the outer frame, drive-on ramps (approx. 3,000 x 750 mm), climbing bar on the outside of the ramps and rear slope, laterally adjustable drive-on ramps, spring-assisted lifting for one-piece ramps, 70 mm thick wooden floor, storage box with lid for lashing chains or tie-down straps, contour marking according to regulations, spring-loaded parking brake, chassis fully hot-dip galvanized, incl. axle load indicators, Surcharge for: warning signs with lighting and beacon = Price: 400 €, widening to 3 m = Price: 500 €, hydraulic one-piece ramps and hydraulic ramp adjustment = Price: 1,000 €, excavator shovel recess = Price: 1,000 €, Also available with 8.20 m loading platform length + widening in stock. -- Subject to typing errors, mistakes, and changes, sample images --, More data at: !, More Details: ! Podoz E Ekgspfx Alwsgt

Condition: new, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 6,500 mm, loading space width: 2,550 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Chassis: Hot-dip galvanized, wooden floor 70 mm thick, 18 x lashing eyes, 2 x ramps each 3,100 mm long x 760 mm wide, ramps with spring lifting gear, 8 x stake pockets, loading height: 900 mm, 2 x toolbox, incl. axle load indicators, , Surcharge for: Galvanized steel bulkhead: 500 ¤, , , , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Pgedpfx Ajz E Ek Tslwet

Condition: new, empty load weight: 3,090 kg, maximum load weight: 8,510 kg, overall weight: 11,600 kg, axle configuration: 2 axles, loading space length: 5,700 mm, loading space width: 2,430 mm, suspension: steel, tire size: 355/60 R 18, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 355/60 R 18, rear tire size: 355/60 R 18, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way tipper, sideboards 500 mm high, galvanized, wide tires 355/60 R 18, loading height approx. 970 mm, central locking for side and rear sideboards, side sideboards pivoting and foldable, side sideboards with spring relief, platform floor made of fine-grained steel, 4 mm thick, 12 x heavy-duty lashing eyes recessed in the floor, tipping angle: 50 degrees rear tipping angle and 45 degrees side tipping angle, continuously adjustable drawbar, rear stakes can be inserted, geared support winch with load and fast gear, front, integrated receiving shaft for two aluminum loading ramps in the chassis, contour marking according to ECE R 048 regulation, surcharge for aluminum ramps, load-bearing capacity per pair 10 tons and 2 x folding supports, rear, ramps suitable for steel-tracked vehicles and vehicles with rubber tires, price: 1,900 euros, -- subject to printing errors, errors and changes, sample images --, more data at: !, More details: ! Pgsdpjz E Elkefx Alwet

Condition: new, empty load weight: 9,150 kg, maximum load weight: 30,850 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space length: 9,100 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, ABS, air suspension with lifting and lowering function, axle load scales, total loading platform length approx. 9,100 mm, low bed approx. 6,900 mm long, loaded loading height approx. 890 mm, 24 lashing rings each for 10 t, 12 stake pockets in the outer frame, loading ramps (approx. 3,100 x 760 mm), climbing strip on the outer ramp and rear slope, laterally adjustable loading ramps, 68 mm thick wooden floor, storage box with lid for lashing chains or tension belts, contour marking as per regulations, rotating beacon, spring-loaded parking brake, incl. axle load display, vehicle hot-dip galvanized, Surcharge for: hydraulic ramp adjustment = price: €1,000, -- Printing errors, mistakes and changes reserved, sample images only --, More data at: !, More details: ! Pjdpfez E Epiox Alwogt

Condition: new, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,550 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Chassis: Hot-dip galvanized, wooden floor 70 mm thick, 20 lash rings, loading ramps (approx. 3,100 x 750 mm), climbing strip on the outside of the ramps and rear slope, ramps laterally adjustable, hydraulic ramps, 8 stake pockets, loading height: 900 mm, 2 toolboxes, contour marking according to regulations, incl. axle load indicators, surcharge for: front wall steel, galvanized: €500, hydraulic adjustment of ramps = price: €1,000. -- Typos, errors, and changes reserved, sample images --, More data at: !, More details: ! Pgsdpoz E Eqyefx Alwst

Condition: new, empty load weight: 2,980 kg, maximum load weight: 7,520 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, each ramp is approximately 2,700 mm long x 560 mm wide, ramps with grating, loading height: 840 mm, 12 tie-down points, each with a capacity of 2.5 tons, 8 tie-down points, each with a capacity of 6 tons, steel sideboards, foldable and removable, wooden planks, 50 mm thick, loading area sloped at the rear, interior loading area width 2,480 mm, rear underride guard removable, front section for drive-through loading, vehicle with temporary registration, also available with a loading area length of 5,300 mm!!, -- subject to printing errors, errors and changes, sample images --, more data at: !, More Details: ! Pjdpfx Aloz E Etbewogt

Condition: new, empty load weight: 3,780 kg, maximum load weight: 6,720 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 7,100 mm, loading space width: 2,480 mm, loading space height: 2,420 mm, loading space volume: 42 m³, suspension: air, tire size: 245/70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, tail-lift, BPW axles, Dautel or BÄR tail lift, load capacity 1,500 kg, 4 cylinders, aluminum platform 1,800 mm long, 2 roll-off safety devices, with own batteries and charging cable, side wall thickness approx. 17 mm, , Front with portal doors for through-loading with short drive-over plate, , 2 rows of combination lashing rails, 7 pairs of lashing eyes embedded in the floor, , Rental price from 720 ¤ , , , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Pgsdpjz E E E Rofx Alwet

Condition: used, Year of construction: 1965, Technical details: sheet width: 1200 mm plate thickness: 1,0 mm throat of pillar: 1200 mm number of cutting strokes max.: 45 p.Min. throat max.: 300 mm cutting gap adjustment: nein down holder: 5 Stück back gauge: ca. 500 manuell mm total power requirement: 2,2 kW Podpfxeu Icpps Alwjgt weight of the machine ca.: 1,6 t dimension machine xH: 1,6 x 1,6 x 1,9 m further features: -with shear angle adjustment -operation via foot switch -voltage 380 V *

Condition: used, Year of construction: 1969, Technical details: sheet width: 2000 mm plate thickness: 1,5 mm distance between columns: 2100 mm table-size: 2150 x 450 mm height over floor: 850 mm knife length: 2100 mm down holder: ja mm back gauge: 460 manuell mm strokes per minute: ca. 50 Hübe/min cutting gap adjustment: ja cutting angle: nein total power requirement: ca. 5,5 kW Pgsdpfou Icp Aox Alwjt weight of the machine ca.: ca. 3,0 t transport measurements machine: 2,7 x 1,6 x 1,8 m Further features: - incl. Table extension (L: 1750 x W: 1000 mm) and adjustable limit stop - back gauge with linear scale, operation with hand crank i.D. *

Condition: used, Technical details: sheet width - max.: 200 mm plate thickness: 10 mm Knife length: 175 mm round: Ø 20 mm square: 18 mm height over floor: 900 mm machine weight ab.: 200 kg dimension machine xH: 0,73 x 0,66 x 2,3 m dimensions L x W x H: Untergestell/Tisch: 0,73 x 0,66 x 0,60 m MECHANICAL HAND LEVER SHEARS Steel construction welded with angle - with base frame -Hand lever length = 1,300mm, with safety lock Pedpfxsu Icqao Alwjgt *

Condition: used, Technical details: plate width: 800 mm coil weight: 12 t sheet width - max.: 800 mm sheet width - min.: 300 mm thickness of strip/band: max. 5,0 mm band speed: 4,5 / 25 m/min work height max.: 1700 mm Payload: 12,0 to (Coil) Weight approx.: 7,3 + 6,62 t dimensions of coil: 3,2 x 1,9 x 2,7 m dimension machine xH: 2,5 x 2,6 x 2,45 m Decoiler with loading device Can optionally be sold together with stock no. 0100571. straightening unit: Infeed rollers: 2 x Ø 144 x 850mm Straightening rolls: 3 x bottom rolls, rigid, Ø 100 x 850mm, 30mm adjustable 3 x top rollers, Ø 110 x 850mm; 30 mm adjustable Coil unwinding machine: Outer Ø 1.500mm Pgjdsu Ic Avepfx Alwst Strip width max. 800mm Load capacity max. 12 to Clamping Ø 470 - 630 / 570 - 730mm Transport unit LxWxH: 1700 x 1500 x 1000mm; crosswise running, with prism support 1000 x1000mm Machine will be offered and sold with Stock no. 0100521 as a decoiling and streightening line. *

Condition: used, Technical details: floor-plate length: 4500 mm plate width: 1250 mm plate height: 250 mm Plate thickness: 250 mm weight of the machine ca.: 3,6 / pro Platte t transport dimensions LxWxH: ca. 4,5 x 1,3 x 0,3 / pro Platte m Pedsval Hdepfx Alwegt There are 2 plates for sale. Material: Cast steel T-slots according to DIN 650 a=21; h=40; b=39.5; c=16mm; center distance T-slot to T-slot = 250mm *

Condition: used, Technical details: wire diameter - max.: 9,0 mm wire diameter - min.: 2,0 mm voltage: 380 V / 50 Hz V control voltage: 220 V Total power requirement: 18 kW Weight approx.: 5,0 t Pgedpfx Ajvc Aklolwet dimensions: Schmiermittelanlage: 830 x 650 x 1000 mm dimension machine approx.LxWxH: 3,3 x 1,5 x 1,45 m dimensions electric cabinet LxWxH: 0,7 x 1,5 x 1,75 m WIRING AND CUTTING MACHINE / MACHINE WAS UPGRADED WITH A NEW CONTROL SYSTEM IN 2000 A programmable, electronically-hydraulically controlled universal spring coiling machine for the production of right and left-hand tension and compression springs as well as torsion springs. The springs can be produced with any pitch and shape of spring body. Output max. 90 pieces/min. Outer spring Ø 10 - 120 mm Unlimited wire feed length, speed = 27 - 80 m/min. Coiling device: two-finger system wire thickness Ø 2.0 - 9.0 mm; spring outer Ø Ø 10 - 120 mm Single-finger system: wire thickness Ø 3.0 - 7.0 mm; spring outer Ø max. Ø 60 mm Equipment: 5x feed rollers, wire holder 3 mm two-finger Spring length measuring device LION PRECISION-PANTHER Wire roller holder POST, motor-driven, mandrel holder Ø 1,400 mm Lubrication system Control cabinet cooler RITA Hydraulic unit Optional many accessories and/or spare parts! i.D. *

Condition: used, Year of construction: 1995, Technical details: sheet width: 3000 mm plate thickness: 12 mm distance between columns: 3500 mm control: Cybelec DNC 10 G back gauge: 1200 motorisch mm cutting angle: 1,2 - 2,73 ° cutting gap adjustment: ja mm cutting capacity : 66.000 daN daN Knife length: 3100 mm down holder: 17 Stück interface: RS232 Table dimensions: 3200 x 600 mm total connected load: 22 kW weight of the machine ca.: 11,0 + (1,0 to Anbauteile+Zubehör) t space requirements approx. LxWxH: ca. 4,5 x 2,6 x 2,1 m transport dimensions LxWxH: ca. 5,0 x 2,25 x 2,2 m The guillotine shear was put into operation for the first time in 1998. The DNC 10 G control unit was specially designed for guillotine shears. It has a numerical axis for controlling the backgauge and automatically calculates and regulates the cutting gap, the cutting angle and the cutting depth, taking into account the material to be cut. (Data from the manufacturer) Table with side stopL:930 x W:105 x H:42 mm 2 table extensions L:1600 x W:100 x 83 mm Angle fence (attached to table extension) Operation via control panel with swivel arm and foot control Pedpfovc Amtsx Alwsgt Equipment: Drain with rollers for clippings 2x protective grid *

Condition: used, Technical details: Psdpfou Nkrnox Alwogt length: 640 mm width: 465 mm thickness of clamping plate: 90 mm weight of the machine approx.: 70 kg

Condition: used, functionality: fully functional, fork length: 2,200 mm, Fork extension Fork width: 200 mm Fork thickness: 70 mm Condition: Ready for use and fully functional Technical condition: very good Description: Dimensions: External Length: 2200 mm, Width: 200 mm, Thickness: 70 mm. Internal Width: 160 mm, Thickness: 60 mm. Podsz Ewh Rspfx Alwjgt

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Servo PANEL BENDER FBA 2016 Pgedsz Eq Tgjpfx Alwot CNC sheet metal bending machines are characterized by high flexibility, efficiency, precision, and a high degree of automation. They are suitable for processing housings, doors, and other components. They are widely used in industries such as kitchen appliances, switchgear cabinets, power electronics, elevators, etc. CNC control: Beckhoff Material and bending capacities Max. bending length: 2000 mm Max. diagonal of the sheet: 2400 mm Max. bending height: 165 mm Min. sheet thickness: 0.5 mm Maximum sheet thickness depending on material type Mild steel / carbon steel (410 N/mm²): 2.0 mm Stainless steel (660 N/mm²): 1.2 mm Aluminum alloy (265 N/mm²): 3.0 mm Machine and system data Number of servo axes: 12 Total power: 36 kW Machine weight: approx. 14,000 kg Dimensions (L × W × H): approx. 4.5 × 2.8 × 2.8 m This machine will be exhibited at Euroblech 2026 in Hanover and will be available from October. We have been distributing YAWEI machines throughout Europe for over 20 years. Service and spare parts supply are provided by H+S, all from a single source.

Condition: new, Working width 3500 mm Working height 2300 mm Number of cylinders 4 St. Stable frame welded construction of thick-walled Special hollow profiles , sliding table and pressure beam with 50 mm hole pattern . On the left side continuous abutment for grouting the wide , lower abutment in 2 levels. Podpfx Alod Ih H Nowsgt Vertical pressing cylinder on specialty bar with one- quick adjustment with weight compensation in the 50 mm hole pattern adjustable in height. Long sliding table ensure the continuous recording of high jacking forces . Fast, smooth width adjustment with ball bearing Carriage with central fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and equipped with counterbalance . Lower horizontal pressing cylinders with bore for two abutments levels without weight compensation . Abutment and pressure plate depth 100 mm Machine controlled electro -hydraulic with 2 pieces vertical pressure cylinders d = 60 mm, stroke 120 mm, single-acting, with counterbalance and One-hand height adjustment, 2 piece horizontal pressure cylinders d = 40 mm stroke, 120 mm single-acting ( 1 x with weight compensation ), 2 hand control valves , Pressure gauge, pressure regulator valve 1 of 20 to 150 bar corresponds to 550 4200 kg compression force vertically. With 3 kW three-phase motor for 400 volts , 50 Hz Operating voltage. Complete with electrical connection . Painting RAL 7035 anthracite gray with light gray RAL 7016 . (technical details according to manufacturer - without guarantee ! ) The detailed technical description can be found in the attached pdf file

Condition: excellent (used), Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 40/50 mm Weinig Unicontrol 6 ----- Machine will be checked in our factory before delivery! Technical Data Summary (Please inquire about any additional accessories included) Item 1: Cut-off saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide light for identifying the saw cut CNC-controlled length stop ----- > Length: 3,600 mm > Electronic length stop including positioned cut-off saw Item 2: Tenoning spindle ----- > Number of tools: 3 (stroke 2 x 100 mm) or 4 (Stroke 3 x 80 mm) > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 3000 rpm > Maximum tool swing diameter: 320 mm > Spindle diameter: 50 mm > Maximum tool diameter: 360 mm > Motor power: 11 kW Item 3: 1. Profiling spindle (co-rotation and conventional) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Maximum tool swing diameter: 232 mm > Motor power: 7.5 kW Item 4: 2. Profiling spindle ----- > Position: Vertical right > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Maximum tool swing diameter: 232 mm > Motor power: 11 kW Pjdpfxextvgks Alwsgt 2 axially indexed feed rollers opposite the profiling spindle, for the production of narrow, short parts (e.g., glass-dividing muntins) Munch guide consisting of: Munch support strip from above in the area of ??the vertical right-han d profile milling unit and profiling spindle. Item 5: Horizontal top profile milling unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Spindle speed: 5,850 rpm > Maximum tool swing diameter: 130 mm > Axial travel: 52 mm, indexed in 2 positions > Radial travel: 125 mm, indexed in 2 positions Item 6: 3rd profiling spindle (fitting spindle) ----- > Position: Vertical right > Tool clamping length: 160 mm > Axial travel: 90 mm, indexed in 3 positions > Radial travel: 100 mm, indexed in 2 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Maximum tool swing diameter: 210 mm > Motor power: 3.0 kW Further features ----- > Electric feed height adjustment including mechanical digital display and manual feed bar clamping > Rebating device for tear-out-free rebating > Double part package > Return conveyor for 1-person operation: swivel conveyor > Screen control > Angled window device > Electronic angle display for angled windows > Industrial PC with Windows PC control/NEXUS Extraction nozzle diameter: ----- Crosscut saw 80 mm Tenoning spindle 140 mm Profile spindle 1 140 mm Profile spindle 2 140 mm Grooving device from above 80 mm Hardware spindle 120 mm -----...

Condition: new, Number of sanding units 2 St. sanding width 290 mm Pjdpfx Asyrty Tjlwjgt Sanding height max. 180 mm LÖWER-DoubleSander Solid DSM 3000 ----- Two-sided single wood sander for sanding Solid wood such as window wood etc. Stable Top version with long casting tables, brushing and finishing device and conveyor belt feed. Suitable for high Permanent load even with higher chip removals. - Staggered sanding and finishing units at the top and below - directly driven rubberized sanding rollers for slip-proof free power transmission - Combined grinding via roller and shoe for high chip removal with a flat intervention zone at the same time - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large Grinding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, 1000mm long cast iron tables with a finely planed surface and spring-loaded Pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor infinitely variable for quick adaptation to different types of wood - all motors electrically protected - Ergonomically arranged controls on the workpiece inlet side - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 300mm - Working width 290mm - Grinding thickness 2-180mm - two brake motors for 7.5 kW drive - Feed motor 1.0 kW - Feed speed 4-20 m/min. - automatic height adjustment 0.37 kW - two brush units of 0.37 kW each with fiber brushes D 120 x 300mm - Suction nozzles 2 x 120mm and 2 x 150mm - Pneumatic connection 6 bar - Working height 850mm - Length 2105mm - Length with control panel 2490mm - Width 980mm - Height 1910mm - Weight approx. 1650 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version ----- Price of the above machine on request! ----- Special accessories with additional costs: Workpiece blow-off - using nozzles from above and below at the machine outlet arranged, pneumatically controlled Sanding belt blowout via nozzles directly on the radii of the tension rollers inside the suction arranged, timer controlled on/off 5 seconds each, can be switched on separately Disc unit for defibering - two gr...

Condition: new, 0 0,4 - 3 mm Workingpiece thickness from to 9 - 60 mm Feed speed stufenlos 8 - 12 m/min. total power requirement 15 kw Pjdpfxoy Ay Ake Alwogt Dimensions (L/W/H) 4.290 x 840 x 1.690 mm

Condition: new, cutting width max. 250 mm Cutting height max. 80 mm Saw blade diameter 400 mm Motor output 3,0 kW turning speeds 2800 U/min Required air-pressure 6-8 bar work height max. 900 +-20 mm mm Dimensions (L/W/H) 530x869x1217 mm SALVAMAC Legend 400 – The semi-automatic chop saw ----- - Maximum cutting area: 220x80/ 250x50 mm. (When sawing stacked boards, note: rear stop height 100 mm) The structure is made entirely of sturdy, thick-walled steel, which is painted throughout and reinforced. A solid one Floor mounting system is equipped with flanged steel feet, to ensure secure attachment. The two-hand control is ergonomically positioned for comfort and efficient operation. Motor power of the saw motor 3.0 kW. Pedpfx Alexmk Ddewsgt The cutting speed is adjustable via a pneumatic controller, to enable precise adjustment. The system also has a Shock-absorbing system to minimize vibrations and ensure worker safety to improve. HM circular saw blade, diameter 400 mm, Z=96. The upper pressure hood has an electro-pneumatic control for precise operation. The pressure hood movement system is innovative Ball bearings operated with double dust protection and automatic lubrication system, which ensures smooth functionality. In addition, the electrical system is compliant with CE standards. CE models are standard with at least 1 meter long inlets and outlets (undriven rollers or flat table) to facilitate operation optimize and meet security standards. Technical data: ----- Saw cross section max. 220x80/ 250x50 mm Saw blade motor power: 3.0 kW Saw blade diameter: 400 mm Saw blade type: HM Z=96 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 5 Nl Intake port: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50 Hz 3 phase Worktop height: 900 mm +- 20 mm Color: Ral 7035 ----- Total price ex works: on request! ----- Options like: - Inlet/outlet with undriven rollers/flat table - Mechanical or pneumatic stops - Electronic length stop / slider Salvastop (Combo series) - Movable front protection and more on request! ----- (technical data according to the manufacturer without guarantee!)