Used Thread Clip for sale (2,543)

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Lajdpfjuz If Nex Aabsh Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 620050039, overall weight: 2,550 kg, Thread rolling machine PeeWee type P20SR, used, well-maintained, low operating hours (no hour meter installed), fully functional. Can be inspected and tested under power. Forklift loading included. Includes operating manual/wiring diagram. Includes 20 sets (40 pieces) of thread rolling dies (new price per set approx. €1,100). Lajdpjxalinjfx Aabsh

Condition: used, Year of construction: 2020, functionality: fully functional, metric thread diameter (min.): 3 mm, metric thread diameter (max.): 12 mm, working range: 1,900 mm, overall weight: 13 kg, rotational speed (max.): 400 rpm, torque: 28 Nm, Tapping Range: M3 - M12 Lajdpfxow Smr As Aabjh Rotation Speed: 400 rpm Max. motor torque: 28 Nm Air pressure: 6 - 8 bar Working range: 150 - 1900 mm Machine weight: 13 kg Year: 2020 The pneumatically driven thread tapping machine DUMETA D-JSC-12A is designed for thread cutting in the range of M3 to M12. It features a compressed air motor and a quick-change chuck. The sturdy working arm can be mounted directly onto a workbench using the integrated flange. This allows the tap to be positioned flexibly at various locations on the workpiece without the need to reposition the workpiece itself. The design includes an adjustable angle, enabling the quick-change chuck to be tilted, so that both vertical and horizontal tapping operations are possible. Optional: Workbench with dimensions 2210 mm (L) x 940 mm (W) x 820 mm (H).

Condition: ready for operation (used), Ridgid 1224 Threading Machine, Thread Cutter, Used Machine Overall dimensions: Length: 1140 mm Width: 720 mm Height: 1110 mm Capabilities: Pipe threading: 1⁄4″ – 4″ (8 – 100 mm); 4″ – 6″ (100 – 150 mm) with 161 geared threading attachment. Bolt threading: 1⁄4″ – 2″ (6 – 52 mm). Features: Threads 1⁄4″ – 2″ pipe at 36 RPM and 2½″ – 4″ pipe at 12 RPM. Model 1224 is suitable for threading various types of pipes including black, galvanized, plastic-coated pipes, as well as stainless steel, IMC, and heavy-wall pipe and rod up to 30 Rockwell C hardness. Induction motor ensures noise levels remain within regulatory limits. Special capacitor start/capacitor run motor allows full-range threading even under voltage drop conditions. Uses a 1⁄4″ – 2″ universal die head and a 2½″ – 4″ adjustable die head to cut tapered or straight NPT/NPSM or BSPT/BSPP threads. Ledpowwgvysfx Aabjah Constant and proper lubrication of dies and workpieces via head-through oiling. Technical specifications: Motor: 1.1 kW, single-phase, 50 Hz, induction type. Switches: Reverse / Off / Forward heavy-duty rotary switch and integrated foot pedal. Spindle speed: 36/12 RPM. Gearbox: Two-speed transmission with 3:1 ratio. Chuck: Hammer-type with replaceable inserts. Rear centering device: Cam-operated. Pipe cutter: Model 764, fully self-adjusting and self-centering, with 1⁄4″ – 4″ F-229 cutting wheel. Reamer: Model 744, bladed type, 1⁄4″ – 4″. Lubrication: Through the die head. Pump: Self-priming, gear-type, automatic reversing, with constant flow.

Condition: new, Year of construction: 2025, total width: 1,000 mm, total length: 1,600 mm, total height: 950 mm, power: 1.5 kW (2.04 HP), Roof panel roll forming machine F3-27 with clip relief LLC “Evolutioner” designed roof panel roll forming machine F3-27 with clip relief for metal roof production of double standing seam profile. Standing seam roof is widely used in the manufacturing of various buildings and structures, in the reconstruction of ancient houses and architectural objects. Standing seam gives a beautiful appearance to the roof, pointing its uniqueness and aesthetic design. In modern construction, standing seam panels often decorate the facades of walls of various buildings. The roofing machine F3-27 allows you to roll metal roof panels of various lengths, the rolling length is unlimited. The machine is quite lightweight, which makes it possible to use it directly at the roof installation place and forming panels directly on site. Thus, there is no need to transport finished roof panels from the workshop to the roof installation place, avoiding their possible damage and saving money on transportation services. Technical details: Rolling length – unlimited; Forming steps: 7; Lock high (mm): 27 Metal roof panel machine F3-27 is equipped with width easy adjustable system, so to adjust the width of the panel you just need to turn the special wheel. As extra options with F3-27 roll forming machine you can get: Lajdjp Stgnepfx Aabsh - cross cutting knife; - length measuring device; - ribbed panel rolls; - radius panel rolls; - standing seam hand seamers; - electric seaming machine ESM-1; - sliding clip formers; - fixed clip formers; - floor decoiler; - ribbed panel forming machine RPFM; - automatic shear with automatic system; Portable roof panel machine F3-27 has six pairs of forming rolls to make a profile height of 27 mm and an additional stand for rolling clip relief. A relief clip is a special bend on the panel to hide sliding or fixed clips under it. Those clips are used to connect roof panel to the roof frame. In addition, we produce following metal roof panel machines: standing seam metal roof machine F3; roof panel machine F3-9 with clip relief; snap lock roof panel roll forming machine SL-1; automatic snap lock roof panel machine SL-1 auto;

Condition: used, Year of construction: 2015, thread dia. 20 - 80 mm grinding length 3500 mm thread pitch . mm threading lenght min./max. 50/3500 mm centre height 400 mm workpiece length - max. 4000 mm control Siemens 840-Dsl feed speed u-axis 0 - 2500 mm/min feed speed w-axis 0 - 2500 mm/min feed speed b-axis 100 1/min total power requirement 45 kW weight of the machine ca. 24 t dimensions of the machine ca. 10,7 x 4,6 x 2,9 m Thread Grinding Machine / Profile Grinding Machine, suitable for: - the thread grinding of single and multi-start ball screws with gothic profiles and special profiles - Ø 20 to 80 mm with a grinding wheel Ø of 350 to 500 mm - length between the centers up to max. 4000 mm Equipment / Accessories: - grinding spindle: - capacity 14 kW - with a grinding wheel diameter range of 350-500 mm, cutting speeds between Laedjw Ed S Uepfx Aabeh 20 and 75 m/s can be set. - grinding wheels: - diameter new 500 mm - diameter worn 350 mm - bore diameter 203.2 mm - shaped diamond roll: - diameter 121.3 mm - radius 0.5 mm - driver flange for workpiece diameter 15-70 mm - driver: - for 10-32 mm drive diameter on the workpiece - for 31-60 mm drive diameter on the workpiece - for 60-105 mm drive diameter on the workpiece

Condition: used, Internal threading machine HAGEN & GOEBEL type HG 10 Tapping machine, Vertical tapping machine Machine. No. 4462 Year of construction approx. 1980 Cutting capacity in steel M3 to M10 Cutting capacity in cast iron M3 to M16 Laedpfx Asupbf Doabsh Cutting capacity in brass M3 to M18 mm throat depth 250 mm Pinol stroke 80 mm Table size 340 x 240 mm Spindle speed 200-1000 rpm 6 steps Motor power 0.55 and 0.75 kW Mains connection 380 Volt, 50 Hz - 6 speed levels through 2 motor speeds and 3 belt levels - Thread pitch via guide cartridge - 2 guide cartridges with 1.0 mm and 1.25 mm thread pitch - Spindle holder with cone Ø 14.8 to 16 mm and 4 mm keyway - Table height adjustment with toothed rack via hand crank on the round column - Quick-change tapping chuck size 1, Ø 19 mm Space requirement L x W x H 850 x 550 x 1800 mm Weight 255 kg Good condition

Condition: ready for operation (used), Five older thread milling machines Mikron are available, 3x Hydraulic Thread Milling Machine Mikron 132.02, 1x Mikron 132-01, 1x Mikron 104-01 and 1x Short Thread Milling Machine Mikron 106.01, an on-site inspection is possible. Ledpfxew Sxyxj Aabsah

Condition: like new (used), functionality: unexamined, Attachment for cutting female threads, with MAS cam automaton. Originally packed, unused. Ljdpow N Ta Iefx Aabjah

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 1747, workpiece diameter (max.): 45 mm, spindle diameter: 54 mm, Precision Thread Rolling Machine – Nissei FA-6U Laodewz R Twspfx Aabsh Offering a high-quality Nissei FA-6U thread rolling machine, made in Japan. This machine is in excellent working condition and known for its precision and durability. A trusted Japanese trademark, ideal for high-accuracy thread forming applications. Pressure: 6 t Workpiece diameter min/max: 3/45 mm

Condition: new, Year of construction: 2025, Fixed clip former CF-25 was designed by our company for fixed cleat production of standing seam roofing panels with a seam high of 25mm. Following clip is the main fixation element that ready roofing panel fastens to the roof base. A fixed clip has many advantages, such as simple design, low production cost, easy installation. We make clip formers for 25, 27 or 39mm clip highs. Lodpfxjqxadbj Aabsah As blank, you can use metal in strips of the required width with up to 0.8 mm thickness. You can make product clip in one easy step -just need to put blank metal into the press and activate the press with manual handle system. Clip former makes clip bending and necessary holes cut in one-step operation. Thus, with our clip production press customer has opportunity to produce a fixed clamp in numbers, using it for his own needs or to sell it for other roofing installation companies. Fixed clip former is lightweight one, which allows taking device to working places and transport it easily. For productive work, clip former must be securely fastened to a flat surface. Fixed clip former press CF-5 made by our company will save your time and money from looking for standing seam fixation elements suppliers, will help you effectively organize your product production and will make roofing works more convenient. We also manufacture sliding clip formers. As an option we can make fixed clamp former for standing seam panels of 25, 27mm or 39mm lock high, those panels you can make with following machines: Standing seam roofing machine F3; Roof panel standing seam roll forming machine F3-27 with clip relief; Standing seam roll former F3-39;

Condition: good (used), ca. 452 shelves Meta, 1m x 0,40m / 0,60m - used - : Price per shelf: 8.-€ (net)! Minimum purchase: 50 pieces Manufacturer: Meta Type: Meta Clip Year of manufacture: unknown Depth: 60cm width 1m = approx. 52 pieces Depth: 40cm width 1m = approx. 400 pieces Lsdpfx Ajki Txcjaboah Shelves are partly knocked out or slightly bent at the holders for the shelf supports. A blow with a hammer should be enough so that they can be hooked in again without problems. Height: approx. 4cm Load: unknown - should carry at least 100kg Condition: good Available: immediately Location. Frankenberg / Saxony

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, SPECIFICATION MODEL HK-40 ROLLING FORCE(KN) 10-400 SPEED RANGE(RPM) 17-53 MAX. DIE LENGTH(MM) 230 WORKPIECE DIA(MM) Ø4-Ø120 Lajdpfx Aev Iapisaboh MAIN ENGINE(KW) 18 TOTAL POWER(KW) 21.3 MIN MAX TOOL DIA(MM) Ø160-Ø210 DIE SPINDLE DIA(MM) Ø69,85(Ø80 OPT.) MAX PITCH(MM) 7 SWIVEL ANGLE ±12 WEIGHT(KG) 4800

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 280 0113 4023, THE MACHINE CAN BE VISITED AT OUR PLANT IN BOLOGNA. Ledpfx Aajwd Shhsboah

Condition: good (used), Year of construction: 2013, fuel type: diesel, color: black, power: 11 kW (14.96 HP), Year of manufacture: Jun 2013 Model year: 2013 Field of application: Construction Empty weight: 857 kg Technical condition: good Visual appearance: good Damages: none Serial number: AKA0003767 Please contact Pedro or Arie for more information 11x Thermo-King 2013 Clip-on SG 3000: - ID 10756 - 12.148 hours - ID 10757 - 14.130 hours - ID 10758 - 16.689 hours - ID 10759 - 15.023 hours - ID 10760 - 11.946 hours - ID 10761 - 9.652 hours Lasdpfxswp R A Is Aaboh - ID 10762 - 12.586 hours - ID 10763 - 13.047 hours - ID 10764 - 12.474 hours - ID 10766 - 11.146 hours - ID 10767 - 13.103 hours All units have been serviced at this hours. Check our website for actual availability:

Condition: good (used), Thread cutting machine, pipe thread cutter -for: pipe size max. 2 inches -Cutting jaws: 1" inch -Drive: via 3 gears -Dimensions: 550/360/H240 mm Lodsb A Iyaopfx Aabjah -Weight: 55 kg

Condition: new, Year of construction: 2025, Sliding clip formers are used to produce fixation sliding clips for double standing seam roofing panels. Before installation roofing panels have to be made using roll former roofing machines. After finishing of panels production and preparing roofing works panels can be installed on roofing place with special fixation clips. Those clips, depending on design, could be fixed or sliding ones. Fixed clip has simple and cheap design so it can be good for small roofs that doesn’t have long length panels. Sliding clip are good for big roofs with different designs and long-length panels. Sliding clips can move and self-find perfect position so not be damaged and safe for roof while temperature expansions. We offer punching presses for making both fixed and sliding clips. We make sliding clip formers for 25, 27 or 39mm clip highs Lasdpfx Aeqxalxoabsh For sliding expansion clips productions there have three presses to be used. First sliding clip bottom part press is used for punching bottom part of sliding clip with fixation round holes and connection oval hole. At the same time this press cuts metal strip with necessary length. Blank for clip production is easy to get using manual guillotine or cut-to-length slitting machine. Second sliding clip bottom part bender is used for bending of sliding clip bottom part to 90 degrees angle. So, after this operation bottom part is ready. Third clip former makes top part of sliding clip at the same time forming and bending it. After producing bottom and top part of sliding clip you can easily connect it to one working sliding clip. So using sliding clip formers that we offer you can easily make expansion clip and use it while double standing seam roofing installation without any unnecessary deformations. Maximum metal thickness you can work with -1mm. To get more information about sliding clip former we produce please contact our sales department.

Year of construction: 1998, condition: excellent (used), Technical detils : Ledpfx Aaeh Hp H Ssboah - Capacity - 500 nails/ min. - Power - 7 kw - Wire range - 1,0 - 4,2 mm - Nails lenght - 30 - 150 mm - Year - 1998

Condition: used, Year of construction: 1991, workpiece diameter 30 mm threading length 110 mm thread pitch 0,5-2,75 mm/GG total power requirement 4,5 kW Lasdpfx Aast Hwzcobsh weight of the machine ca. 1,7 t dimensions of the machine ca. m

Condition: good (used), thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting apparatus Lasdpfx Aovvub Aeabsh -Manufacturer: Lenze ABW, tapping chuck MK3 -Type: GB3 -Bore: Ø 24 mm -Dimensions: Ø 80 x 265 mm -Weight: 3.7 kg

Condition: used, Year of construction: 1986, workpiece diameter 460 mm Ledpet H Smtofx Aabjah threading length 900 mm thread pitch 100 mm total power requirement 10 kW weight of the machine ca. 8 t dimensions of the machine ca. m

Year of construction: 1985, condition: used, workpiece diameter 50 mm threading length 100 mm thread pitch mm Laodpfx Aaet Hwn Njboh total power requirement 1 kW weight of the machine ca. 1500 kg dimensions of the machine ca. m

Condition: used, Year of construction: 2011, workpiece diameter 320 mm threading length 570 mm thread pitch 315 mm Lajdpet Hxbdjfx Aaboh total power requirement 17 kW weight of the machine ca. 12 t dimensions of the machine ca. m

Year of construction: 1985, condition: used, workpiece diameter 25-90 mm threading length 3000 mm thread pitch 2-16 mm total power requirement 25 kW weight of the machine ca. 10,5 t Lsdpfetzdyzox Aaboah dimensions of the machine ca. m

Condition: used, Year of construction: 2001, pressure 0,2-40 t max. workpiece diameter 70 mm threading length 120 mm Control total power requirement 29 kW weight of the machine ca. 9,5 t Lasdpfst Hw N Tjx Aabeh dimensions of the machine ca. m