Used Thread Mill Machine for sale (91,516)

Condition: used, Thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine Manufacturer PEE-WEE Type P 24 Q serial no. LC2403099 year of construction 2004 Rolling force max. 24 ton. Tool diameter max. 200 mm Rolling spindle diameter 69,85 mm Tool bore diameter 70 mm (nominal diameter) Tool length, tool length max. 180 mm Workpiece diameter max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 rpm Motor power hydraulics approx. 3 kW Motor power roller drive 5.5 kW Mains connection 400 Volt, 50 Hz - Swivel roller spindle for threaded continuous rollers - Rolling spindle speed in 4 stages via gear changeover - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons good condition Grooving rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The thread length is maximum as long as the rolling tools are wide. Continuous rolling: When the thread length is greater than the rolling tool width. Through-feed tools have 3 sections - the infeed, the calibration section and the outfeed. Grooved rollers have no pitch and are swiveled with the pitch angle of the profile to be rolled. Pitch rollers differ from grooved rollers in that they have a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece. Kdodpeh A S Htefx Aabeu

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 620050039, overall weight: 2,550 kg, Thread rolling machine PeeWee type P20SR, used, well-maintained, low operating hours (no hour meter installed), fully functional. Can be inspected and tested under power. Forklift loading included. Includes operating manual/wiring diagram. Includes 20 sets (40 pieces) of thread rolling dies (new price per set approx. €1,100). Ksdpfx Aexalineabodu

Condition: ready for operation (used), Ridgid 1224 Threading Machine, Thread Cutter, Used Machine Overall dimensions: Length: 1140 mm Width: 720 mm Height: 1110 mm Capabilities: Pipe threading: 1⁄4″ – 4″ (8 – 100 mm); 4″ – 6″ (100 – 150 mm) with 161 geared threading attachment. Bolt threading: 1⁄4″ – 2″ (6 – 52 mm). Features: Threads 1⁄4″ – 2″ pipe at 36 RPM and 2½″ – 4″ pipe at 12 RPM. Model 1224 is suitable for threading various types of pipes including black, galvanized, plastic-coated pipes, as well as stainless steel, IMC, and heavy-wall pipe and rod up to 30 Rockwell C hardness. Induction motor ensures noise levels remain within regulatory limits. Special capacitor start/capacitor run motor allows full-range threading even under voltage drop conditions. Uses a 1⁄4″ – 2″ universal die head and a 2½″ – 4″ adjustable die head to cut tapered or straight NPT/NPSM or BSPT/BSPP threads. Constant and proper lubrication of dies and workpieces via head-through oiling. Technical specifications: Motor: 1.1 kW, single-phase, 50 Hz, induction type. Switches: Reverse / Off / Forward heavy-duty rotary switch and integrated foot pedal. Spindle speed: 36/12 RPM. Gearbox: Two-speed transmission with 3:1 ratio. Chuck: Hammer-type with replaceable inserts. Kodpjwwgvyjfx Aabjdu Rear centering device: Cam-operated. Pipe cutter: Model 764, fully self-adjusting and self-centering, with 1⁄4″ – 4″ F-229 cutting wheel. Reamer: Model 744, bladed type, 1⁄4″ – 4″. Lubrication: Through the die head. Pump: Self-priming, gear-type, automatic reversing, with constant flow.

Condition: used, Year of construction: 2015, thread dia. 20 - 80 mm grinding length 3500 mm thread pitch . mm threading lenght min./max. 50/3500 mm centre height 400 mm workpiece length - max. 4000 mm control Siemens 840-Dsl feed speed u-axis 0 - 2500 mm/min feed speed w-axis 0 - 2500 mm/min feed speed b-axis 100 1/min total power requirement 45 kW weight of the machine ca. 24 t dimensions of the machine ca. 10,7 x 4,6 x 2,9 m Thread Grinding Machine / Profile Grinding Machine, suitable for: - the thread grinding of single and multi-start ball screws with Kedpfx Aew Ed S Usabjdu gothic profiles and special profiles - Ø 20 to 80 mm with a grinding wheel Ø of 350 to 500 mm - length between the centers up to max. 4000 mm Equipment / Accessories: - grinding spindle: - capacity 14 kW - with a grinding wheel diameter range of 350-500 mm, cutting speeds between 20 and 75 m/s can be set. - grinding wheels: - diameter new 500 mm - diameter worn 350 mm - bore diameter 203.2 mm - shaped diamond roll: - diameter 121.3 mm - radius 0.5 mm - driver flange for workpiece diameter 15-70 mm - driver: - for 10-32 mm drive diameter on the workpiece - for 31-60 mm drive diameter on the workpiece - for 60-105 mm drive diameter on the workpiece

Condition: ready for operation (used), Five older thread milling machines Mikron are available, 3x Hydraulic Thread Milling Machine Mikron 132.02, 1x Mikron 132-01, 1x Mikron 104-01 and 1x Short Thread Milling Machine Mikron 106.01, an on-site inspection is possible. Kdsdpfxow Sxyxj Aabeu

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 1747, workpiece diameter (max.): 45 mm, spindle diameter: 54 mm, Precision Thread Rolling Machine – Nissei FA-6U Offering a high-quality Nissei FA-6U thread rolling machine, made in Japan. This machine is in excellent working condition and known for its precision and durability. A trusted Japanese trademark, ideal for high-accuracy thread forming applications. Pressure: 6 t Kdjdpfxewz R Two Aabou Workpiece diameter min/max: 3/45 mm

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Ksdpfouz If Nox Aabodu Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 280 0113 4023, THE MACHINE CAN BE VISITED AT OUR PLANT IN BOLOGNA. Kdjdpfjwd Shhex Aabeu

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, SPECIFICATION MODEL HK-40 ROLLING FORCE(KN) 10-400 SPEED RANGE(RPM) 17-53 MAX. DIE LENGTH(MM) 230 WORKPIECE DIA(MM) Ø4-Ø120 MAIN ENGINE(KW) 18 TOTAL POWER(KW) 21.3 MIN MAX TOOL DIA(MM) Ø160-Ø210 DIE SPINDLE DIA(MM) Ø69,85(Ø80 OPT.) MAX PITCH(MM) 7 SWIVEL ANGLE ±12 WEIGHT(KG) 4800 Kdsdpfxsv Iapij Aabju

Condition: good (used), Thread cutting machine, pipe thread cutter -for: pipe size max. 2 inches -Cutting jaws: 1" inch Kdedpfx Aaob A Iyajbju -Drive: via 3 gears -Dimensions: 550/360/H240 mm -Weight: 55 kg

Year of construction: 1998, condition: excellent (used), Technical detils : - Capacity - 500 nails/ min. - Power - 7 kw - Wire range - 1,0 - 4,2 mm - Nails lenght - 30 - 150 mm Kodoh Hp H Sjpfx Aabjdu - Year - 1998

Condition: used, Year of construction: 1991, workpiece diameter 30 mm threading length 110 mm thread pitch 0,5-2,75 mm/GG Kedpfst Hwzcox Aabjdu total power requirement 4,5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. m

Condition: used, Internal threading machine HAGEN & GOEBEL type HG 10 Tapping machine, Vertical tapping machine Machine. No. 4462 Year of construction approx. 1980 Cutting capacity in steel M3 to M10 Cutting capacity in cast iron M3 to M16 Kdjdpfxsupbf Do Aabou Cutting capacity in brass M3 to M18 mm throat depth 250 mm Pinol stroke 80 mm Table size 340 x 240 mm Spindle speed 200-1000 rpm 6 steps Motor power 0.55 and 0.75 kW Mains connection 380 Volt, 50 Hz - 6 speed levels through 2 motor speeds and 3 belt levels - Thread pitch via guide cartridge - 2 guide cartridges with 1.0 mm and 1.25 mm thread pitch - Spindle holder with cone Ø 14.8 to 16 mm and 4 mm keyway - Table height adjustment with toothed rack via hand crank on the round column - Quick-change tapping chuck size 1, Ø 19 mm Space requirement L x W x H 850 x 550 x 1800 mm Weight 255 kg Good condition

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: M24I/9053, Offer Number: M24I/9053 Machinetype: thread rolling machine - 2 rolls Make: BAD DÜBEN Type: PRX 32 E CNC Constr. year: 2002 diameter range: 10-24 mm Forging power: 7-20 to Kdsdpfx Aajw Nxnwjbju thread length plunge method: 195 mm daylight: 160 mm max. pitch: 3,5 mm roller bore: 80 mm roller width: 235 mm roller length: 195 mm rpm: 40 - 315 Location: Germany

Year of construction: 1995, condition: good (used), 2 Die Thread Rolling machine SENY, Type D-44 EH, Versatile for all types of work, manual and automatic cycles, easily adapted to automating loading,range of cycle times and roll speeds.operating pressure 100Kn, workpiwcw min 3mm max 40mm,lead 3,5 max, pitch of serrations 1,75mm max, roll length 80mm, diameter roll min 80mm max 120mm,roll spindle speeds 47-94, roll spindle diameter 40mm,distance between rolling spindles 80mm minim 165mm max, working stroke 7, feed 0,5mm/s minim 6mm/s maxim, rolling time,variable 0,1-100 seg, swivelling roll spindles +-5º,main motor 3Kw, connected electrical load 4,68kw, tank capacity 150L,aprox weigth 1100kg Kdedopwbvkspfx Aabsu

Condition: good (used), Thread cutting machine, pipe thread cutter -Pipe deburrer: for thread cutting machine -Pipe size: up to inner Ø 58 mm -Dimensions: see photos Kodpfxswyu Hfs Aabedu -Dimensions: 270/250/H75 mm -Weight: 2.7 kg

Condition: excellent (used), This spot tacking machine is used for several operations in the ladie´s and men´s outer wear industry: Woven labels can be tacked as well as turned-under hems or edges and turned-up trouser bottoms. It´s durable blind spot tacks do not leave any marks on the outside of the garment. Due to optional equpment this machine can get converted for other applications. Kdsdpfxsv Ty Hlj Aabeu

Condition: used, Year of construction: 1986, workpiece diameter 460 mm Kodjt H Smtjpfx Aabsdu threading length 900 mm thread pitch 100 mm total power requirement 10 kW weight of the machine ca. 8 t dimensions of the machine ca. m

Condition: refurbished (used), functionality: fully functional, Universal Profile Hobbing and Thread Milling Machine ZFWVG 250x5000 / S7 • Thread milling • Gear hobbing Kedpfx Aaow Hquxobjdu • Longitudinal milling Max. workpiece diameter over saddle: 250 mm Max. workpiece diameter over bed guideway: 500 mm Spindle bore: 102 mm Tailstock quill travel: 100 mm Main motor: 4.0 kW Cross-feed motor (X-axis): 4.3 kW Longitudinal feed motor (Z-axis): 3.8 kW Electrical configuration Operating voltage: 400 V Control voltage: 24 V Frequency: 50 Hz Programmable logic control (PLC) for fixed machine functions Total connected load: 9.5 kW Milling length: 5,000 mm Space requirements: Length: 7,000 mm Width: 2,500 mm Height: 1,600 mm Net weight: 6,700 kg Standard accessories: • Standard thread milling attachment ApG • Max. milling diameter: 150 mm • Spindle taper: Morse 3 • Max. module for hobbing: Module 3 • Min./max. number of teeth for hobbing: 4–50 Options: • Hobbing attachment ApFW Hobbing of parallel and helical profiles up to module 7 Max. milling diameter: 150 mm Spindle taper: Morse 4 • Heavy-duty thread milling attachment ApGS Hobbing of parallel and helical profiles up to module 5 Max. milling diameter: 150 mm Spindle taper: Morse 4

Year of construction: 1985, condition: used, workpiece diameter 50 mm threading length 100 mm thread pitch mm total power requirement 1 kW weight of the machine ca. 1500 kg dimensions of the machine ca. m Kodpot Hwn Njfx Aabodu

Condition: used, Year of construction: 2011, workpiece diameter 320 mm threading length 570 mm thread pitch 315 mm total power requirement 17 kW Kdodst Hxbdjpfx Aabeu weight of the machine ca. 12 t dimensions of the machine ca. m

Year of construction: 1985, condition: used, workpiece diameter 25-90 mm threading length 3000 mm Kdjdpfx Aotzdyzoabeu thread pitch 2-16 mm total power requirement 25 kW weight of the machine ca. 10,5 t dimensions of the machine ca. m

Condition: used, Year of construction: 2001, pressure 0,2-40 t max. workpiece diameter 70 mm threading length 120 mm Control total power requirement 29 kW weight of the machine ca. 9,5 t Kdsdpfxet Hw N Ts Aabsu dimensions of the machine ca. m

Condition: used, Year of construction: 1979, workpiece diameter 320 mm threading length 300 mm thread pitch mm Kjdpfx Aast Hwnpjbjdu total power requirement 90 kW weight of the machine ca. 12000 kg dimensions of the machine ca. m Thread and worm grinder for steering worms

Condition: used, Year of construction: 1985, thread dia. 254 mm grinding length 350 mm thread pitch 51 mm Control SIEMENS S 8 total power requirement 12 kW weight of the machine ca. 5000 kg dimensions of the machine ca. m B A H M Ü L L E R Automatic Internal Thread Grinding Machine Model IPE 12 i.S. Year 1985 Serial No. 103174 _____ workpiece Ø, max. 300 mm workpiece length, approx. 350 mm height of centers (WP spindle/grinding spindle) 300 mm table stroke approx. 450 mm thread diameter ground max. approx. 254 mm thread diameter ground min. approx. 25,4 mm thread length ground in one setting max. 250 mm Lead range, max. 51 mm Lead angle max. 10 ° Total electrical load, approx. 12 kW - 380 V - 50 Hz Weight, approx. 5,000 kg Accessories / Special Features * This is a programme controlled (SIEMENS S 8) internal thread and internal worm grinding machine , suitable for the grinding of ball screw nuts. * All movements are controlled by the SIEMENS programme control * Automatic infeed for grinding depth. * Automatic diamond roll profile dressing device, motorized by hydraulic motor,and device can be swivelled and mechanically adjusted lengthwise. Kdedpst Hw U Aefx Aabsu * FISCHER Internal grinding spindle up to 30.000 rpm with oil and air lubrication and with Infinitely variable grinding spindle speeds. • 4-jaws chuck approx.. Ø 250 mm * Separate switch cabinet, separate hydraulic unit, oil drip pan, etc. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.