Used Three Knife Machine for sale (67,684)

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Year 2007 - Co-Pilot with touchscreen Rbjdou Tuiiepfx Adbot - Right hand infeed - Counter stacker - Cut counter - Exchangeable cutting tables (standard set): 4 - 18 - Knife pre-setting device - Sets of knives: 2 Condition: cleaned in good working condition

Condition: good (used), Year of construction: 2003, functionality: unexamined, Built in 2003 Size trimmed max 300 x 420 x 80 mm min 100 x 100 x 2 mm Size max 305 x 430 mm Pile height 80mm Rbjdpfx Adsvtqbasbet Press capacity max 20 kN Speed max 3,900 c/h Air pressure 6 bar Compressed air 40 Nm³/h - 6 bar Electric supply 400/50 V/Hz/A Length 3,300 mm Width 3,060 mm Height 1,740 mm Weight 5,170 kg (approx.) Equipment • co-pilot • right hand infeed • feeders • control with touchscreen • equipment for changing the format

Condition: used, Year of construction: 2004, Three knife trimmer Kolbus HD 142.P Year 2004 Description: Rjdpfx Adewnbv Ajbsbt - Co-Pilot with touchscreen - Semi automatic setting - Right hand infeed - Counter stacker - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2 Kolbus: HD 142.P Maximum size (cutted): 305 x 420 x 80 mm (WxHxT) Minimum size (cutted): 100 x 100 x 2 mm (WxHxT) Maximum size (uncutted): 310 x 430 x 80 mm (WxHxT) Maximum pile height: 80 mm Max. mechanical speed: 3.900 cuts/h Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: like new (used), functionality: fully functional, 1 as-new high-performance knife grinding machine MVM KX 250 – 2100 mm (ex-demonstration unit) * 1-year warranty • Siemens touch screen PLC (control system, spare parts supply guaranteed by MVM) • Grinding wheel motor 15 kW, 20 HP, 400V, 3-phase, 50 Hz • Grinding wheel diameter: 250 mm • Magnetic rotary table, adjustable from 0 to 90 degrees • Magnetic table width: 150 mm • Magnetic table length: 2100 mm • Vernier indexer for magnetic table rotation +/- 90° • Controls for rapid or slow downfeed of the grinding wheel • Automatic feed controlled by Siemens PLC (0.001 – 0.1 mm) • Fully automatic work cycle (rough grinding, fine grinding, sparking out) • Variable carriage speed: 1 – 30 m/min • Automatic lubrication of PTFE slideways • Coolant injection at center of the grinding wheel plus 2 further nozzles on each side • External coolant tank with pump • Magnetic separator with discs for coolant cleaning • Motorized quick-change flange for fast tool changeover • Variable grinding wheel speed (adjustable to blade, machining phase [roughing, finishing, sparking out], and blade wear) • Automatic approach to workpiece (HSS) • LED lighting • Dimensions: 4.12 x 1.50 x 1.75 m • 1-year warranty Redpjx Nhnhofx Adbobt

Condition: used, Year of construction: 2005, Three knife trimmer Müller Martini Esprit (1576) Year: 2005 For three side trimming of book blocks and brochures, operable in connection with book production lines. Description: Rjdpfx Asvxfkgedbobt - Colour monitor with touchscreen - Automatic setting - Infeed conveyor from the left - Left hand infeed - Exchangeable cutting tables, number: 3 - 11 - Sets of knives: 2 Technical specifications: - mechanical speed: up to 2.000 cycles/h - size range untrimmed max.: 391 x 320 mm - size range untrimmed min.: 148 x 95 mm - size range trimmed max.: 311 x 305 mm - size range trimmed min.: 142 x 75 mm - book thickness: 2 - 80 mm

Condition: good (used), Technical specifications: Working length: 2100 mm Max. bending capacity: 10.0 mm Pre-bending: 8.0 mm Top roller diameter: 200 mm Bottom roller diameter: 180 mm Number of driven rollers: 3 Hydraulic folding bearing Conical bending device Rbodpfx Ajwchn Uedbet Extended rollers for profile bending Control panel with digital display Motor power: 5.5 kW CE mark Dimensions (length x width x height): approx. 3100 x 1150 x 1250 mm Weight: approx. 4 tons Accessories: Several roller sets for pipe and profile rolling The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), Technical data: Rodpfexruvzjx Adbjbt Working length: 2050 mm Max. bending capacity: 18.0 mm Pre-bending: 12.0 mm Top roller diameter: 280 mm Bottom roller diameter: 280 mm Conical bending device Hydraulic drop-end bearing Motor power: 7.5 kW Dimensions (length x width x height): approx. 3650 x 1550 x 1650 mm Weight: approx. 7.5 tonnes The seller is not liable for typing or data transmission errors. The machine's condition in appearance, technology, and wear corresponds to its age; used machines are sold without any guarantee.

Condition: excellent (used), Technical Details: Working width: 3100 mm Maximum bending capacity: 16.0 mm Rjdpfx Aexyvx Tedbsbt Maximum pre-bending: 12.0 mm Top roll diameter: 300 mm Side roll diameter: 270 mm All three rolls powered Hardened rolls Conical bending device by tilting of both side rolls Swiveling control panel with digital display Hydraulic drop end bearing Motor power: 7.5 kW Dimensions (L x W x H): approx. 5800 x 1700 x 1500 mm Net weight: approx. 8.5 tons The seller is not liable for typing or data transmission errors. The machine's appearance, technical condition, and wear correspond to its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 2008, Technical Data: Working width: 1030 mm Max. bending capacity for mild steel St40: 10.0 mm Upper roller diameter: 170 mm Number of driven rollers: 2 Electric drive Mobile control panel Manual swing-out of the upper roller CE marking Motor power: 5.5 kW Dimensions (L x W x H): approx. 2700 x 1200 x 1300 mm Net weight: approx. 2.8 tons Rsdpfx Adex Nntkebebt The seller accepts no liability for typing or data transmission errors. The machine is in condition in line with its age in terms of appearance, technology, and wear; used machines are sold without any warranty.

Condition: used, Technical data: Max. length of sharpened knives: 600 mm Diameter of grinding wheel: 130 mm Rodpfx Adjx Eadwjbjbt Manual feed Power supply: 380 V Total power: 0.55 kW Overall dimensions: Length: 1670 mm Width: 950 mm Height: 1600 mm

Condition: ready for operation (used), functionality: fully functional, grinding length: 1,546 mm, grinding width: 150 mm, input voltage: 380 V, grinding wheel diameter: 200 mm, table length: 1,546 mm, table width: 150 mm, We offer this ready for use Reform AR 15 knife grinding machine, year of construction 1992. New electronic drive system installed in 2024. Type: 51 Grinding length: 1546 mm Machine number: 4980 92 Voltage: 380 V Power: 6 kW Available April 2026 If you have any questions or need more information, feel free to send us a message or give us a call. Rodpfxsx R Evfj Adbjbt

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 8292, grinding length: 3,100 mm, total width: 1,500 mm, total length: 5,100 mm, total height: 1,800 mm, grinding width: 200 mm, type of input current: three-phase, workpiece weight (max.): 1,000 kg, input voltage: 400 V, grinding spindle speed: 1,800 rpm, coolant pump power: 100 W, grinding spindle motor power: 1,100 W, overall weight: 2,500 kg, grinding wheel diameter: 200 mm, grinding wheel width: 20 mm, table height: 200 mm, table length: 3,100 mm, table width: 200 mm, control cabinet width: 400 mm, control cabinet length: 1,200 mm, control cabinet height: 1,500 mm, New machine, still in original packaging! Rbjdox Ezu Tjpfx Adbot

Condition: excellent (used), Manufacturer: GLEASON Model: 545 Serial number: 769101 Min.-Max. diameter: 5"-18" Rbodpfx Aex Ih Swedbst Grinding wheel diameter: 10" Grinding wheel speed: 2100 rpm Spindle speed: 45 rpm

Condition: new, Year of construction: 2025, Standing seam metal roof machine F3 with length measuring device was designed by our company to produce standing seam roofing panels for the installation of roofs and facades of various buildings and structures. Sheet metal blanks are passed through the forming rolls of the machine to get the desired shape of the standing seam panel. This method of production allows you to produce panels with a speed of about 10 meters per minute and fit any roofing companies. Rbedjh Aw Rnjpfx Adbst Bfywfrix The machine is equipped with an easy width adjustment system, so it takes just a few minutes to readjust it from rolling one width to another. The F3 machine can work with panels from 200 to 700 mm wide. It is possible to work with metal sheets and coils made of galvanized steel, copper, zinc, aluminum, stainless steel, etc. Maximum metal thickness for work – 0.8 mm. Standing seam metal roof machine F3 can go in a standard set, and with additional accessories providing additional functionality of the machine and simplifying the work process. As additional options, we offer a floor decoiler, which can be used directly on the working site thanks to its lightweight and small size, so you can put the coil to the decoiler and feed it to the machine. As an optional extra, you can purchase a length-measuring device to roll roofing panels the same length and in semi-automatic mode, without marking them with tape and ruler. Using those accessories, you can really save your time and make your work more accurate. With the length measuring device, our customers very often buy a cross cutting knife in order to cut the panels of the desired length from the coil. As extra options, we also offer ribbed panels rolls to form standing seam panels with ribs and providing additional roofing system rigidity. You can use the machine with or without rolls. Extra rolls for radius panels production allow you to produce panels with a big bending radius, which allows you to use them for various structures, such as hangars, etc. We have a ready-made solution for your business for hangars roofing buildings production. For protection against various damages, we offer the use of a top cover, which prevents foreign objects from getting inside the machine and makes the working process of the machine safer - roll forming roof panel machine F3 with top cover For closing the standing seam lock our customers can use special standing seam roofing tools While installing roof panels, roofers use special fixation elements – sliding clips, so we offer punching presses for their production - sliding clip formers Thus, using a standing seam metal roof machine F3, our customers and partners can produce efficient standing seam roofing panels, and with additional accessories can make this process more convenient and faster.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Various grinding wheels available, including a diamond wheel. Wheel diameter 150-225 mm, Tool diameter 100-300 mm, Tool width max. 240 mm, 2 mandrels, diameters 40 mm and 50 mm, Grinding spindle speed continuously variable 1500-3000 rpm, Clearance angle: Radial 10-30 degrees, Axial 0-20 degrees, For swivel heads up to 60 degrees, Coolant tank 50 liters, Very good condition; Rbodowmy E Hspfx Adbet

Condition: used, Sharpening machine for profile cutters and straight grinders. . Grinding interlocked in 2 axes. Very easy to operate. Width of the tool max: 360mm Rodpfonzkx Ssx Adbjbt Maximum cutting circle 350mm profile 300mm straight Minimum cutting circle 70mm Main motor power kW: 1.5 at 3000 rpm at 50 Hz. Wet grinding: Yes

Condition: used, Year of construction: 1983, grinding length: 710 mm, type of input current: three-phase, Automatic knife grinding machine. Max. grinding length: 710 mm. Grinding motor: 1 kW. Redpfx Aexytnfodbebt

Condition: like new (used), Year of construction: 2024, operating hours: 120 h, functionality: fully functional, total length: 4,350 mm, total width: 4,900 mm, total height: 1,880 mm, power: 30 kW (40.79 HP), 1. Main control: Weikoda PLC and human-machine interface, with automatic stop when counting meters, automatic detection of remaining quantity, and automatic Rbedpjwd Ig Hofx Adbot speed regulation of line speed. 2.Winding tension: It adopts independent motor and PLC for follow-up control, with pre-tension system. The tension is automatically controlled by servo motor, constant tension and taper tension. 3. Unwinding: Adopt one-piece three/six-inch universal shaftless loading and unloading, hydraulic lifting. 4. Correction system: Adopt domestic famous and high-quality correction device for edge control. 5. Traction: Large diameter precision traction steel roller, surface plasma treatment, dynamic and static balance, roller cylindricality ÿ±0.02mm, runout ÿ0.02. Pressure roller wear-resistant rubber wheel NBR Shore hardness 60~65°. 6. Cutting: The bottom knife is a ÿ105 diameter bottom knife, which adopts automatic knife arrangement, and the upper knife is a ÿ105 circular knife. 7. Low-voltage electrical appliances and pneumatic components: using imported original parts such as AirTac and Schneider.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, cutting height (max.): 50 mm, product length (max.): 330 mm, product width (max.): 330 mm, production capacity: 1,000 unit/h, No reserve price – guaranteed sale to the highest bidder! Rbjdpsxlzuqofx Adbot Three-knife trimmer for high productivity: up to 1,000 cutting cycles per hour! TECHNICAL DETAILS Cutting thickness: 2 – 50 mm Number of knives: 3 Untrimmed format: Maximum: 330 x 330 mm; Minimum: 148 x 105 mm Trimmed format: Maximum: 300 x 300 mm; Minimum: 142 x 100 mm MACHINE DETAILS Dimensions (L x W x H): 2,260 x 1,160 x 1,600 mm Weight: approx. 1,530 kg FEATURES User-friendly LCD display Flexible processing of various product sizes Fast changeover times of less than 10 minutes Advanced locking system for operator safety

Condition: good (used), Built in: 2000 Size: max 320 x 384 mm Size trimmed: max 304 x 310 mm, min 70 x 136 mm Rbodpfxjxxi Npe Adbet Speed: max 7.000 c/h, min 1.000 mm Power requirements: 7 kW (220/380V, 50Hz) Air requirement (6 bar): 40 m³/h Width: 3.612 mm Depth: 1.970 mm Height: 2.020 mm Weight: 3.500 kg (approx.) Equipment • belt feeding • automatic infeed with integrated pre stacker • make-ready system • silicone spraying device • external knife changing device Equipment for changing the format: • 1 set of pressing plates & holders • 1 set of table quick change plates • 3 sets of cutting sticks • 2 set of knives • central lubrication • belt delivery • 1 set of operator manuals • 1 set of electrical diagrams • 1 set of standard tools • 1 spare part catalogue • standard equipment

Year of construction: 1962, condition: good (used), Manufacturer: VEB Type: RV16 Machinable cross-section: 120 x 140 mm Weight: 2,7 t Rbjdoltiy Tspfx Adbjt

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Weinig Rondamat 980 Year 2010 Technical data: Max. tool width: 330 mm With PowerLock: 322 mm Tool flight circle: 100 - 300 mm With PowerLock (optional): 100 - 250 mm Grinding wheel diameter: 125 - 200 mm Rodewvvylspfx Adbsbt Spindle speed frequency-controlled: 1500 - 4600 rpm Grinding spindle drive: 1.5 kW

Condition: new, Year of construction: 2025, spindle speed (max.): 1,450 rpm, grinding spindle motor power: 7,500 W, grinding wheel diameter: 250 mm, We are a family producer of machines based in eastern Poland. All our machines are in 100% build in GRAFS factory in Poland. We present our heavy-duty but simple straight knife grinder suitable for a broad range of industrial knives, machine designed especially for: - different recycling blades, - chipper knives, (ALBACH, JENZ, BRUKS), - planer knives, - guilotine blades, - shredding knives, - granulator blades, The knife sharpening machine model SR Semi-auto can be supplied in different grinding lengths: mm 1.200, mm 1.800, mm 2.100 mm, 2.400 mm, 3.000 mm Sending inquiry to us, please let us know what grinding length you need. TECHNICAL FEATURES IN PRESENTED MODEL GRAFS SR: • Hand wheel for down feed of the grinding motor, • Automatic mechanical downfeed system (from 0,003 mm up to 0,03 mm) • Adjustable grinding parameters during operation (downfeed, number of head passes, spark-out passes). • Grinding wheel motor angle adjustment within 0–10° (for surface grinding). • Swiveling electromagnetic chuck / table with ±120° angular scale, “S” type polarity, magnetic force 120 N/cm². Equipped with T-slot channel on the operator side for clamping knives. • Exchangeable hardened steel guide strips on the machine guides ensuring long service life. • Manual positioning of the grinding head over the workpiece, (possibility of locking and unlocking carriage driving unit by lever), • Carriage movement relative to the trolley in the Y-axis, for centre head position relative the different knives angles. • Quick vertical travel of the grinding motor for faster setup and efficient grinding wheel replacement. • Reversal of grinding wheel rotation, • Powerful 7,5 kW grinding wheel motor for wheel sizes Ø175–250 mm. Quiet, vibration-free special grinding head, soft-start included, • Special wheel holder/adapter mounted on the motor shaft, allowing fast change of any grinding wheel (CBN, DIA, or segmented) using just 3 screws. • Automatic external magnetic coolant cleaner – MS60. • Variable carriage speed smoothly adjustable in the range 1–12 m/min. • Carriage run adjustment knob (potentiometer) for fine control. • Precision scale for downfeed / grinding motor position measurement. • Precision scale for blade angle measurement. • Complete documentation: manuals, operating system, electrical diagrams in English / German / Czech / Spanish, including EU Declaration of Conformity. • Base of the machine surface finish and protection: polyurethane anti-rust coating with acrylic hardener. Body painted RAL7012 or RAL7035; trolley and carriage RAL7021. • Adjustable anti-vibration leveling feet. • LED lamp in working area. • Very compact electric cabinet at the back of the machine base / body. • Coolant through the 2 nozzles either side of the grinding wheel, Rbsdpfxjgwct De Adbet • Packing, shipment preparation, and truck loading included. FUNCTIONS INCLUDED: • Automatic down feed with mechanical feed system by ratchet, • Grinding wheel motor angle adjustment 0–10° (surface grinding option). • Smooth adjustment of carriage/head speed 1–16 m/min. • Manual positioning of the grinding head over the workpiece. • Carriage relative movement in the Y-axis. • Capability of grinding knives up to 360 mm in height. • Quick up/down travel of the grinding motor for fast setup and wheel replacement. • Automatic coolant filtration system. We are a producer from Poland, we provide after sale support and service with 12 month's warranty.

Condition: new, Year of construction: 2025, functionality: fully functional, grinding length: 2,400 mm, total length: 3,500 mm, grinding width: 180 mm, grinding wheel diameter: 250 mm, Equipment: documentation/manual, GRAFS GR-2400e is heavy-duty straight knife grinder / vertical surface grinder with swiveling electromagnetic chuck, suitable for a broad range of industrial knives, such as guilotine knives for metal, granulator blades, veneer knives, chipper knives, planer and paper and knives HM / HSS for paper cutters. We are a sharpening shop for over 12 years. All our machines are in 100% build in GRAFS factory in Poland. TECHNICAL FEATURES / MAIN ADVANTAGES: Rbodpfx Aed Tc Haodbjt • Mitsubishi Touch Screen operation panel HMI 7"; • Mitsubishi PLC, • Mitsubishi Inverter for carriage run adjustment / feed, • Internet communication system with GRAFS technical support in case of any problems, • Grinding wheel motor 11 kW (15 HP), 400-3-50 Hz; • Grinding wheel Ø250mm corundum in aluminum base, (segment grinding wheel upon request); • Reversal of grinding wheel rotation; • Electromagnetic chuck 180x2400 mm; Surface grinding 180x2400mm, • T channel on the other side of the chuck (from operator side), • Angular divisor for magnetic table rotation ±120°; • Fast grinding wheel descent and ascent (by switches) and slow approach by hand wheel; • Motorized automatic grinding wheel downfeed, controlled by Mitsubishi PLC (0.001-0.05 mm); • Automatic work cycle (roughing, sparkout); • Variable carriage speed from 1 to 16 m/min; • Coolant through 2 nozzles either side of the grinding motor; • Longitudinal grinding head angle adjustment from 0° to 5°; (flat surface grinding possibility), • External tank with pump; • Magnetic cleaner / filter MODEL MS, • Fast grinding wheel exchange system, grinding wheel adapter with 3 securing screws, • Exchangable hardened steel strips on machine body guides, 2 at the top, and 2 at the bottom of main guide. • Carriage rollers from INA, on on the regulated cam, • Heavy body of the machine (steel plates 10 mm thick), build in cell design, • Electric cabinet on Shneider components, • Secure cover of the grinding wheel with magnetic interlocks, • User manual and control panel menu in Polish / English / German / Czech / Spanish / French, • Machinery LED lamp in working area, UPON REQUEST: • Different types of knives mounting, • Coolant cleaner with automatic paper filter, • Main grinding motor can be 5.5 kW, 7.5 kW and 11 kW, • The knife sharpening machine model GRAFS GR can be supplied in 4 different grinding lengths: 1.200 mm, 1.800 mm, 2.100 mm and 2.400 mm. • Accordion covers on whole body of the machine, • Mist collector, We provide an European Declaration of Conformity and all documents. The machine is new, we are a producer from Poland, we provide after sale support and service with 12 month's warranty.

Condition: used, Dreimesserautomat von Heidelberg in einem guten Zustand. Rbedpfx Aexdc N Todbst Three Knife Trimmer of Heidelberg in good condition. Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test