Used Three Saws for sale (11,842)

Condition: good (used), Year of construction: 2003, Machine is in good working condition. Technical data are on picture. Bsdpfx Apj Aaz A Istelp Parts shown by hand not come.

Condition: reconditioned (used), Year of construction: 2002, KASTOpos GA 4" Fully automatic miter bandsaw machine – KASTO Type/Model: KASTOpos GA 4 Condition: Used, partially overhauled in 2026 Year of manufacture: 2002 Work performed / partial overhaul • Machine thoroughly cleaned and technically inspected • Machine housing and machine body repainted • Mechanical, hydraulic, and electrical functions checked • Saw blade, material clamping device, and feed system checked and adjusted • Band guide and all machine movements checked for proper function • Safety and control elements checked • Necessary repair work carried out as part of the partial overhaul • Final complete functional test performed • Roller conveyor disassembled, cleaned, technically inspected, and repainted • Rollers and bearing points of the roller conveyor checked • Roller conveyor then reassembled and functionally tested The machine is in technically sound and visually well-maintained condition. This is a partial overhaul, not a complete mechanical general overhaul. Technical data Cutting range at 90°: Round 400 mm, Flat 400 x 320 mm, Square 320 x 320 mm Cutting range at 45°: Round 320 mm, Flat 320 x 320 mm, Square 320 x 320 mm Cutting range at 60°: Round 240 mm, Flat 210 x 320 mm, Square 220 x 220 mm Cutting speed, stepless: 16 to 160 m/min, frequency-controlled Material feed (single stroke): max. 750 mm Shortest remaining piece length: Automatic: approx. 100 mm Single cut: approx. 10-30 mm Bledjz Sqlkspfx Aptsp Saw motor power: approx. 4.4 kW Total connected load: approx. 7.4 kW (380 V / 50 Hz) Machine weight: approx. 3,000 kg Inquiry item: Shipping costs will be provided in a separate quote.

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: 137, total width: 2,800 mm, total length: 700 mm, total height: 1,700 mm, type of input current: three-phase, Band saw blade grinding machine Risstaler riv Rivo 200 GA Year of manufacture 1984 Bodpfxez Uq E As Aptolp Various tooth shapes can be selected Operating manual available Feed rate: 30 or 60 teeth per minute.

Condition: new, Cutting height 175 mm Motor output 15 kW cutting width 620 mm Cutting length 5200 mm Bodez St R Aspfx Aptslp Dimensions (L/W/H) 7000 x 1470 x 850 mm

Condition: new, empty load weight: 5,850 kg, maximum load weight: 12,150 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,420 mm, total length: 2,550 mm, total height: 7,700 mm, suspension: air, tire size: 445/40 R19,5, wheelbase: 1,450 mm, Equipment: ABS, | MFCT UNISTAR ZPX19.550 | 3-sided tandem tipping trailer | BPW axles with drum brakes | Loading dimensions: W: 2.46m, internal width: height: 70cm, L: 5.50m | Tow hitch 50mm | Height with lowered landing gear: 102cm | Tires: 445/45 R19.5 | New vehicle | Loading ramps | Lashing points | Dutch ramps: 10,000kg | Ramp width: 40cm | Pneumatic rear gate with remote control. | Subject to errors, typos, and prior sale. Blsdpfx Aoz Sux Isptsp

Condition: new, IVECO 70C18, New, Euro 6, Wheelbase 3450, 2026 model, differential lock, manual transmission, air conditioning, reinforced leaf springs with auxiliary leaf springs, sprung driver's seat with armrest, navigation system, DAB radio, comfort package, power windows and mirrors, central locking with audible alarm, complete with a new three-way tipper body with TR30 aluminum sideboards, front and rear stake pockets. Bledpe Aghflefx Aptep

Condition: used, Year of construction: 1998, functionality: fully functional, type of input current: three-phase, cutting height (max.): 2,200 mm, cutting width (max.): 4,300 mm, saw blade diameter: 300 mm, rotational speed (max.): 4,750 rpm, Equipment: CE marking, documentation/manual, saw blade guard, STRIEBIG STANDARD III – vertical panel saw For sale: a STRIEBIG STANDARD III vertical panel saw. This machine comes from the renowned Swiss manufacturer STRIEBIG, a leader in the production of vertical panel saws. It is ideally suited for cutting furniture panels, MDF, HDF, plywood, chipboard, laminated boards, and plastics. The saw is fully functional and ready for use. It is currently in use at our company and can be inspected while in operation. Technical data: Manufacturer: STRIEBIG AG (Switzerland) Model: STANDARD III Power supply: 400 V Frequency: 50 Hz Saw blade diameter: Recommended: 300 mm Minimum: 290 mm Saw blade speed: 4750 rpm Vertically moving cutting carriage Mechanical pre-cutting device Original chip extraction system Robust steel construction Precision guides Panel stops Bjdpfxszizy Ie Aptjlp Clear control panel Safety switch Working area Based on the photos: Cutting length approx. 5300 mm Cutting height approx. 2200 mm (Please provide exact dimensions if required). Technical condition 100% operational Ready for use without any additional work Regularly serviced Can be tested during operation Very precise and stable Application Ideal for cutting: Furniture panels MDF Plywood OSB boards Laminated boards Plastics

Condition: good (used), Year of construction: 2016, Experience seamless operation with all movements meticulously controlled by NC technology, ensuring swift and precise cuts every time. Boasting CNC controlled cutting height as standard, this machine provides unmatched versatility and precision in your cutting operations. Tailored for the demands of the roof truss and timber frame industries, this 3-axis CNC upstroke crosscut saw sets the standard for accuracy and reliability with a 700mm saw blade and 7.5hp motor. Whether you're tackling compound angle cutting or executing long scarf cuts, the HMZ-3 delivers flawless results with every cut due to its large cutting height of up to 250mm and capability to handle even the most intricate cutting tasks. An onboard optimisation package is included which allows cutting lists to be test optimised against timber lengths to generate a pre-optimised cutting list. Bsdpfe Agnz Nox Aptslp Specification 6000mm infeed capacity Right-to-left feed orientation HM-Z saw unit with 700mm blade and centre-line cutting 4000mm outfeed table Onboard optimisation Outfeed monitor

Condition: excellent (used), Catalog number 7805 TECHNICAL DATA - track width 340mm - shaft width 340mm - disc bore diameter 80mm - discs mounted on the upper shaft 350mm - discs mounted on the lower shaft 300mm - max cutting height 200mm Bsdszxqq Ispfx Aptslp - min workpiece length 700mm – top - 2 rows of feed rollers - smooth, sliding, pressure shaft - feed rollers - 2 smooth, sliding, pressure shafts - shaft with saws - 3 smooth pressure rollers – bottom - track - shaft with saws - track - stepless feed speed adjustment - main motors 2x approx. 55kW - feed motor 3kW - electric lifting of the machine body up/down - manual adjustment of the saw shafts - central lubrication - diameter of dust extraction nozzle 2x200mm - dimensions L/W/H 2700x1800x2150mm - weight approximately 5000kg ADVANTAGES – German production – two-shaft – 2x55kW motor – multi-saw, used, very good condition Net price: 178900 PLN Net price: 41600 EUR, depending on the exchange rate of 4.3 EUR (Prices may change due to higher fluctuations)

Condition: used, functionality: fully functional, Package stacking on a roller conveyor with vertical rollers for aligning and shaping the package. Strapping aid (frame, support for spacer wood, the plastic strapping is applied using a separate hand tool – not included). Transfer from roller conveyor to chain conveyor, transfer to a second chain conveyor before the cut-off saw. HOLTEC-Variocut saw with laser for positioning the cut. Removal of finished packages on the same chain conveyor. Complete disposal of cut-off wood and chips via a rubber conveyor belt running under the entire length of the system. Bljdpfx Apo Aguvhotsp Transfer/straightening on a HAAS vibratory feeder.

Condition: used, Year of construction: 1970, machine/vehicle number: 251, functionality: fully functional, power: 18.5 kW (25.15 HP), input voltage: 380 V, input current: 36 A, input frequency: 50 Hz, cutting height (max.): 80 mm, cutting width (max.): 180 mm, saw blade diameter: 400 mm, height adjustment type: mechanical, saw blade bore: 55 mm, rotational speed (max.): 2,920 rpm, Used, functional underslab multi-blade saw "SENDEN" with mounted feed unit "ROMA" Spindle diameter 45 mm, incl. 4 saw blade clamping sleeves with 55 mm diameter (suitable for circular saw blades with a 55 mm bore). No spacer rings or saw blades are included. Drive motor 36.5 A / 18.5 kW. 2920 RPM. The machine is designed for a cutting height of up to approx. 80 mm. Saw blades of approx. 250 - approx. 400 mm can be used. Bedpfx Ape Agu Txotslp 4 clamping sleeves are included in the scope of delivery. Original technical documentation is not available. Please refer to the photos! Sale is as is. No warranty for defects. The machine can be inspected (power is connected). Mounted 4-roller feed unit ROMA Type DVPF 0810-4/2 with ribbed feed roller rollers. Feed speeds can be directly selected. Electrical power 0.88/1.25 kW.

Condition: excellent (used), Year of construction: 2003, Veneer saw Langzauner LZ 5/2 - 3500, precision cutting saw with jointing unit (planer unit) and veneer support table Robust machine construction by Langzauner A video of the machine in operation can be sent upon request. For tear-free and gap-free cutting of veneer, including thick veneer Cutting length max. 3500mm Cutting and jointing height max. 40mm Easy-to-guide unit, runs on two hardened, ground linear guide shafts Rear support table with continuous finger stop, adjustable from approx. 2 - 56cm, with pneumatic clamping and digital display The crosscut table is very solidly constructed and runs on parallel circular guides; it is slightly offset to the right so that crosscuts can be made on the left side of the veneer packs Angle stop on the support table and on the front support for end cuts of the veneer packs Special equipment with rack-and-pinion compensation for the pressure bar, which prevents the pressure bar from tilting pneumatic workpiece clamping, also holds in the center position Drive motor saw 2.2kW, milling unit 1.1kW The motors can be easily switched on at the handle, so they only run when needed. When switched on, the saw and the milling unit are automatically engaged by compressed air; the cutting height can be selected in three positions using a turret stop. Carbide-tipped precision cutting blade, sharpened Planer head Z4 with pull-cut, equipped with new carbide inserts and spare blades included Practical front veneer support, automatically extended pneumatically when the planer unit is used Dust extraction connection 150mm with dust extraction channel V-belt renewed CE marking Emergency stop cable Operating manual Onboard tools Bedpfx Apo Afznuetslp Original paint, only a few spots have been touched up The machine is in excellent condition and has obviously only been used rarely. Dimensions approx. 5050 x 1500 x 1450mm (LxWxH). Weight approx. 1000kg. The machine can be demonstrated on site by appointment. We only offer machines that are available in our warehouse and ready for demonstration; see "other offers from this provider".

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, actuation type: hydraulic, total height: 1,650 mm, total length: 2,495 mm, total width: 700 mm, overall weight: 780 kg, Equipment: CE marking, documentation/manual, Semi-automatic bandsaw for cutting medium-sized solid bars and profiles, offering high performance and excellent cutting precision. Robust bandsaw guides made with sealed guide bearings and adjustable tungsten carbide inserts. Blade tensioning achieved through manual rotation of the handwheel and guaranteed by an electromechanical device. Safety device to prevent accidents on the flywheel guard and on the blade. Cutting thickness: 1.5 mm Cutting range: 60° left, 60° right Adjustable stop for cuts of the same size Brush-type bandsaw cleaning device Hydraulic power unit motor: 0.55 kW Electropump: 0.06 kW for bandsaw cooling Vise, jaw height: 200 mm Vise, jaw length: 257 mm Work table height: 760 mm Machine weight: 780 kg Cutting capacity: -0-45-60° Solid round bar 0°: 150 mm Bodpfez Nh S Aex Aptolp Tubular round bar 0°: 350 mm Square bar 0°: 330 mm Rectangular bar 0°: 150 x 320 mm Solid round bar 45°: 150 mm Tubular round bar 45°: 310 mm Square bar 45°: 280 mm Rectangular bar 45°: 150 x 320 mm Vise opening: 420 mm Variable speed drive: 20-90 rpm

Condition: good (used), Technical data: Motor power S6: 1150 W Motor power S1: 1100 W Voltage: 400 V Dimensions: Swivel range: 0° - 45° Table size: 500 × 400 mm Overhang: 380 mm Table height: 990 mm Exhaust connection: 100 mm Cutting performance: Max. cutting height at 90°: 220 mm Cutting width at the rip fence: 240 mm Blodpfxez I R Uvj Aptsp Band saws: Saw blade: 2950 mm Wheel diameter: 400 mm

Condition: used, mileage: 36,041 km, power: 110 kW (149.56 HP), first registration: 12/2019, fuel type: diesel, empty load weight: 2,700 kg, maximum load weight: 4,100 kg, overall weight: 6,800 kg, axle configuration: 4x4, wheelbase: 2,600 mm, brakes: other, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, loading space length: 2,200 mm, loading space width: 1,600 mm, loading space height: 400 mm, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, differential lock, onboard computer, parking sensors, power assisted steering, soot filter, trailer coupling, * German vehicle * 1st owner * Original, only 36,041 kilometers * Only 1,807 operating hours * Formerly owned by a municipal authority * Condition: see photos * All-wheel drive, hydrostatic transmission * Body: three-sided tipper * Loading area: Length 2,200 mm x Width 1,600 mm x Height 400 mm * Aluminum loading flaps * Steel loading floor with DIN tie-down points * Municipal plate at the front * Various hydraulic and electrical connections * Ball-type trailer coupling, 3,500 kg * 1 x pintle hitch trailer coupling, 3,500 kg * Various hydraulic and electrical connections * L - Comfort cab with 2 seats * Air conditioning * All-wheel steering, switchable * Multifunction lever for driving and hydraulic control * Hydrostatic steering * Differential lock, rear axle, switchable * Air-suspended driver's seat with armrest * Reversing camera * 60 km/h approval * Storage compartments * Work lights * Heated exterior mirrors * LED rear lights * Rotating beacon * Sliding windows, right and left * Heated windshield * Wheelbase 3,150 mm * GVWR 6,800 kg * Unladen weight: 2,700 kg Blods Ahg U Sspfx Aptop * Payload 4,100 kg * Self-propelled working machines * In the event of a sale to commercial businesses and for export (non-EU and EU), the German commercial law applies. If a new TÜV (technical inspection) is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV (German Social Accident Insurance) inspection, a new SP (safety inspection), or a new UVV (accident prevention regulations) inspection. You can find more trucks on our website under: We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and examination of the goods so that the buyer does not have any false impressions about their condition and suitability. Inspections and examinations are possible at any time by appointment and are expressly desired. All information is without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, For sale is a robust Braun Canali band saw / resaw, type 1100, manufactured in 1978. The machine is in very good used condition and is designed for professional use in sawmills or for solid wood processing. The machine is particularly suitable for cutting and resawing logs and boards and features a continuously variable feed rate and a cutting depth control. Technical data: Manufacturer: Braun Canali Type: 1100 Year of manufacture: 1978 Machine no.: 6234 Motor power: 15 kW Saw band length: 6,800 mm Saw band width: 60–100 mm Roller diameter: approx. 1,100 mm Continuously variable feed rate Weight: approx. 3,800 kg Can cut logs up to approx. 3,000 mm in length × 600 mm in diameter Equipment: Resawing device for cutting logs and boards Programmable cutting depth control ELGO Electric Type 87P Pneumatic lifting unit Cutting depth programmable – programming function currently defective Cutting depth can be adjusted manually on the control panel: 15–85 mm Heavy-duty industrial design Condition and scope of delivery as per photos Important note regarding the control system: The programmable cutting depth control is currently not functional. However, the cutting depths can be adjusted manually via the control panel from 15 to 85 mm. Additional information: The lower band saw wheel protrudes approx. 300 mm below floor level. Therefore, a corresponding floor recess is required for the installation of the machine. Overall, the machine is in very good used condition. Inspection and demonstration possible by appointment. The machine is currently still at the customer's site but would be available in the short term! Transport possible for an extra charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Bljdpfxezxrtqo Aptep Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: used, mileage: 28,709 km, power: 235 kW (319.51 HP), first registration: 05/2019, fuel type: diesel, empty load weight: 7,650 kg, maximum load weight: 10,350 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 3,690 mm, next inspection (TÜV): 06/2027, color: red, driver cabin: other, gearing type: automatic, suspension: steel, number of seats: 3, loading space volume: 6 m³, loading space length: 4,600 mm, loading space width: 2,420 mm, loading space height: 570 mm, Equipment: ABS, air conditioning, cruise control, differential lock, hydraulics, low noise, parking heater, traction control, trailer coupling, Color: RUBY RED RAL 3003, Body manufacturer: Meiller, Unladen weight: 7650 kg, Permissible total weight: 18000 kg, Cargo area (L W H): 4,600 mm x 2,420 mm x 570 mm, Tire size: 315/80 R22.5, Cargo area volume: 6 m³, 1st axle: , 2nd axle: , Leaf spring suspension, 1 x Airbag, Digital tachograph, Trailer coupling: Rockinger, Auxiliary drive: NH/4C, Low noise: EEC 92/97, Electronic Stability Program ESP, Anti-slip regulation ASR, Adaptive Cruise Control ACC, Stand-alone heater with preselection, Comfort driver's seat, Driver's seat with air suspension, Driver's armrest, Co-driver's bench seat for 2 persons, Radio/CD, Multi-function display: Iveco Control Display High Line, Mobile phone preparation Bluetooth, Lane keeping assist, Rear view camera, Multifunction steering wheel, Electric windows, Fog lights, Exterior mirrors electric and heated, Immobilizer, Central locking with remote control, Rear differential lock, Underrun protection: front, Sun visor, Twin tires, Rotating beacon, - 1 previous owner - German vehicle - Original mileage - Good condition - Total weight of vehicle combination 36,000 kg - MOT/emission test + safety inspection NEW - Maintenance/service NEW, Errors and changes excepted. Bedpfxo Agxi Ds Aptolp

Condition: used, machine/vehicle number: 008348, Max. panel width: 4300 mm Max. panel length: 1600 mm Main saw blade projection: 125 mm Blodpsyl Iiiefx Aptsp No of Grippers: 5

Year of construction: 2025, condition: new, FOR SALE: TradeMak SQUALO 420 Multi-Blade Resaw – LIKE NEW CONDITION For sale is a TradeMak SQUALO 420 multi-blade resaw, manufactured in 2025, with only 100 operating hours. The machine is practically in new condition and is being sold due to an unrealized development project. It can be put into operation immediately and does not require any additional investment. Key technical specifications: Working width: 420 mm Maximum cutting height: 200 mm Maximum feed width: 700 mm Minimum material length: 800 mm Saw blade diameter: 450 mm Feed rate: 6–36 m/min Main motors: 2 × 45 kW PLC control Touchscreen operator panel Variable frequency drive for feed Automatic central lubrication system CE certification Advantages: ✔ Practically new machine ✔ Only 100 operating hours ✔ High-performance, industrial design ✔ Excellent for pallet production and sawmill operations ✔ Can be put into operation immediately ✔ Significant savings compared to the price of a new machine Reason for sale: failure of the investment project. 💰 Asking price: 100,000 EUR + VAT 📍 Location: Mezőtúr, Hungary The machine can be viewed by prior arrangement. Bjdpfx Aey Sw Eueptolp

Condition: used, New three-phase electric motor 37 kW three-phase motor SIEMENS Heavy-duty motor, electric motor, squirrel cage, asynchronous motor Type 1LE16032AA534GB4 Design V1 Frame size 200L Motor speed 2955 rpm Current draw 65 amps Motor power 37 kW Mains connection 400 Volt, 50 Hz Shaft diameter Ø 55 mm Shaft projection length 110 mm Keyway width in shaft 16 mm Flange diameter 400 mm Centric diameter 300 mm Pitch circle diameter Ø 350 mm - Flange motor with 4 mounting holes Ø 19 mm Overall housing length without shaft 640 mm Blodpo Aarfgofx Aptop Overall housing length with shaft 740 mm Required installation space (L x W x H) 740 x 400 x 520 mm Net weight 250 kg Excellent condition – new, unused from stock clearance

Condition: used, Year of construction: 2026, machine/vehicle number: 0101-260040, BEHRINGER EISELE VMS 350 – Vertical Metal Cutting Circular Saw The BEHRINGER EISELE VMS 350 is a robust, manually operated industrial metal cutting circular saw for precise cutting of steel pipes, profiles, and solid materials. The powerful worm gear with EISELE rotational balancer ensures low-vibration sawing, high cutting quality, and long saw blade life. The precise miter adjustment, simple operation, and integrated coolant system make it a reliable circular saw for steel construction, metalworking, and workshops. Key technical data: Saw blade diameter 350 mm Motor power 1.4 / 1.9 kW Speeds 17/34 or 34/68 rpm Cutting range 90° round Ø 120 mm Cutting range 90° rectangular 170 × 100 mm Cutting range 45° round Ø 120 mm Miter adjustment Up to 45° on both sides, 30° to the right Material clamping / Feed Manually Dimensions (L × W × H) 895 × 665 × 1,750 mm Bjdpj Afagcjfx Aptslp Weight approx. 300 kg

Condition: used, mileage: 1,33,712 km, power: 170 kW (231.14 HP), first registration: 09/2018, fuel type: diesel, overall weight: 9,500 kg, axle configuration: 2 axles, next inspection (TÜV): 10/2027, color: blue, gearing type: mechanical, emission class: euro6, total length: 5,982 mm, total width: 2,530 mm, total height: 2,400 mm, loading space length: 4,000 mm, loading space width: 2,380 mm, loading space height: 400 mm, Year of construction: 2018, Equipment: ABS, electronic stability program (ESP), Meiller 3-way tipper Trailer brake, 2-line system Trailer coupling: Central axle trailer G 135 Trailer socket 12V / 13-pin, trailer socket 24V / 15-pin Standard cockpit Suspension: Rear springs 7.1 t Suspension: Front springs 4.4 t Vehicle without Active Brake Assist Transmission - mechanical shifting Pressure regulation system 10 bar Hydraulic connection for tipping trailer LED light package Vehicle outline lights, LED Side turn signals, white Heated air dryer Reinforced engine brake Spare wheel holder behind the rear axle Rotating beacon, left/right Rear cross member for trailer coupling (central axle trailer) Seats in the cab: Driver's seat, comfort suspension seat Seats in the cab: Center seat with seatbelt Exterior sun visor Reinforced rear axle stabilizer (for extremely high loads) Cab socket 24V Side underrun protection Preparation for multimedia devices Emission standard EURO 6 Axle configuration: 4x2 Axle load front axle 4.1 t Approach/front mirrors Exhaust pipe to the center of the vehicle Exterior mirror, electrically adjustable, left Battery 100 Ah Differential lock, rear axle Compressed air tank, steel Two-step entry Cab: S ClassicSpace Cab variant: ClassicSpace Suspension: Leaf spring / Leaf spring Generator 100 A Transmission, 6-speed - Type: G 90-6 Urea tank (AdBlue): 25 liters Manually operated roof hatch (steel) Rear axle, crown wheel 325 Hydraulic pump (Meiller pump - 5 pistons - 254 / 1) Info display 10.4 cm with additional display Body/superstructure: Tipper Fuel tank: 120 liters Engine 5.1 liters - 170 kW Diesel (OM 934) Engine compartment encapsulation Auxiliary drive MB 60-1C Rear window Disc brakes, front and rear axle Seat cover / upholstery: Fabric Seats in the cab: Fixed passenger single seat Splash guard, rear fender Steel rims 6.75x17.5, tachograph / EU control unit Fixed rear underrun protection Front underrun protection Preparation for toll collection Immobilizer Bjdpfx Aps Agx E Aotslp Wheelbase 3020 mm GVW 9,500 kg Curb weight 4,294 kg Tires 235/75R17.5, 70% tread Vehicle No. 2495 - for inquiries. Vehicle in very good overall condition, serviced. No liability for typing and data transmission errors. Subject to errors and prior sale. Daily cash purchase of used commercial vehicles, construction machines, trailers, and semi-trailers from 2000-2026. Leasing and financing possible through our partner bank. Rental possible. Nationwide delivery possible.

Condition: used, mileage: 99,811 km, power: 175 kW (237.93 HP), first registration: 02/2019, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, emission class: euro6, loading space volume: 4 m³, loading space length: 3,800 mm, loading space width: 2,330 mm, loading space height: 500 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), soot filter, tail-lift, ATEGO 1224 K DUMP TRUCK, 2-sided, with rear-mounted crane + ZAA tow hitch * Crane: HIAB X-DUO 078 BS-2 with 5th and 6th control circuits including grapple * Max. hydraulic reach: 7.30 m, lifting capacity: 1,200 kg * Vehicle number for customer inquiries: 4150 * Crane * Engine: Euro VI, with OBD-C * Active Brake Assist * Differential lock, rear axle * Air conditioning * Middle seat, with 3-point seatbelt * Transmission: manual * Lane keeping assist * Environmental badge (green) * Trailer coupling G 145, for ZAA * Trailer coupling, ring spring * Maintained according to service schedule * Stability control assistant (ESP) * Trailer brake, 2-line * Three-seater * Electronic brake system with ABS and ASR * Driver's air-suspended seat, comfort * Power windows, electric, on both sides * Transmission G 90-6/6.70-0.73 * Engine brake, standard system * Gearbox NA MB 60-2c, MPA deep, N-speed * Auxiliary drive, single * Particulate filter * Digital tachograph, EC, speed * Cruise control * Trailer socket 12 V, 13-pin, frame-mounted, LED * Trailer socket 24 V, 15-pin * AdBlue tank 25 l * Body type: dump truck/dump truck with semi-trailer coupling * Roof hatch/ventilation flap, roof * Cab rear wall, with window * Weight variant: 11.99 t (4.9/8.1) * Main mirror, electric, driver's side * Heater, electronic compressed air supply unit * Rear axle suspension: 8.1 t, parabolic * Plastic tank 120 l, left * Meiller pump, 7-piston, type 270/63 * Engine: OM936, R6, 7.7 l, 175 kW (238 hp), 1000 Nm * Wheelbase: 3560 mm * Inline engine, 6 cylinders * S-cab ClassicSpace, 2.30 m, tunnel * Stabilizer bar, for extreme loads, rear axle * Pre-wiring for toll collection * Pre-wiring for later installation of loading crane * ClassicSpace * Cross member, for later installation of trailer hitch G145 ZAA * Tires: tubeless, 265/70 R 19.5, front axle * Front axle suspension: 5.1 t, parabolic * Tail lift (only for commercial vehicles) * 2/3-door Bljdpovpazuofx Aptjp No liability for printing and typographical errors Sale only to commercial businesses Errors and prior sale reserved* Changes, prior sale and errors are expressly reserved. The description serves to identify the vehicle and does not constitute a guarantee in the legal sense of purchase. The description according to the purchase contract is decisive. * TOP SERVICE + QUALITY * We would be happy to provide you with a LEASING/FINANCING/RENT-TO-OWN offer * Guaranteed insurance available upon request from the insurance company * TÜV / UVV LBW / Tachograph inspection and installation of OBU device by our local partners * Customs license plates for 30 days * All customs documents for export are possible, but must be requested individually * TOLL for Toll-Collect can be booked in-house * Free transfer from Stuttgart Airport or Metzingen (Württ.) train station * TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WhatsApp number * * ---- Visit us on our website at: * constantly over 200 vehicles in stock

Condition: used, mileage: 94,800 km, power: 115 kW (156.36 HP), first registration: 03/2019, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space volume: 4 m³, loading space length: 3,800 mm, loading space width: 2,356 mm, loading space height: 400 mm, Year of construction: 2019, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), soot filter, * ATEGO 816 Tipper, 2-sided, with ZAA drawbar coupling + ball hitch * HIAB Rear-mounted crane X-DUO 078 BS-2 * 5th + 6th circuit for grab control * Outreach 7.30 m + Lifting capacity 860 kg CONVERSION to REMOTE CONTROL possible (additional cost net 6,600,-- +) * Vehicle number for customer inquiries: 4 Bledpjw E T R Tefx Aptjp * Crane * Engine version Euro VI, with OBD-C * Active Brake Assist * Air conditioning * Center seat, with 3-point seatbelt * Gearbox, manual * Lane Keeping Assist * Environmental badge (green) * Trailer coupling G 135, for ZAA * Trailer coupling Ringfeder * Stability Program (ESP) * Maintained according to service schedule * Trailer brake, 2-line * Electronic braking system with ABS and ASR * Driver's comfort suspension seat * Power windows, electric, on both sides * Gearbox G 71-6/9.20-1.0 * NA MB 60-2c, MPA low, N-speed * Auxiliary drive, single * Diesel particulate filter * Digital tachograph, EC, speed * Cruise control * Trailer socket 12 V, 13-pin, frame-mounted, LED * Trailer socket 24 V, 15-pin * Three-seater * AdBlue tank 25 l * Body type: Tipper/tipper semi-trailer * Roof hatch/ventilation flap in the roof * Weight variant 8.6 t (3.8/5.7) * Main mirror, electric, driver's side * Heater, electronic compressed air supply unit * Rear suspension, 5.7 t, parabolic * Plastic tank 120 l, left * Meiller pump, 7-piston, type 270/45 * Engine OM934, R4, 5.1 l, 115 kW (156 hp), 650 Nm * Wheelbase 3620 mm * S-cab ClassicSpace, 2.30 m, tunnel * Front suspension 4.0 t, parabolic * Pre-installation for toll collection * Cross member, retrofitted trailer coupling G135 ZAA * Tires tubeless, 235/75 R 17.5 VA * ClassicSpace No liability for printing and typographical errors Sale only to commercial customers Errors and prior sale reserved* Changes, prior sale and errors are expressly reserved. The description serves to identify the vehicle and does not constitute a guarantee in the legal sense. The description according to the purchase contract is decisive. * TOP SERVICE + QUALITY * We will gladly provide you with a LEASING/FINANCING/RENT-TO-OWN offer Guarantee insurance possible upon request with the insurer * TÜV / UVV LBW / Tachograph inspection and installation of OBU device by our local partners * Customs plates for 30 days All customs documents for export are possible, but must be requested individually * TOLL for Toll-Collect can be booked in-house * Free transfer from Stuttgart Airport or Metzingen (Württ) train station * TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * ---- Visit us on our website at * constantly over 200 vehicles in stock

Condition: used, mileage: 43,487 km, power: 382 kW (519.37 HP), first registration: 08/2023, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 09/2027, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), Trailer tipping hydraulics, driver's comfort seat with air suspension and lumbar support, shoulder adjustment and heating, construction site package, EBS, full brake assist, immobilizer, MAN TipMatic Manoeuvre - maneuvering mode, LED lighting, ASR, emergency brake assist, lane departure warning, trailer coupling Ringfeder type RF50 A, MAN Mediasystem Advanced 7'', without navigation map, RIO BOX, smartphone integration, tipping body 4,900mm x 2,380mm Meiller type D316, lashing eyes retractable in the floor plate, side wall height 900mm, front wall height 1,100mm, 350mm guide plate on front wall, steps on front wall, fixed corner stanchions, rear wall height 900mm, swinging rear wall, 150mm discharge chute on tipping body, axial pump tipping hydraulics Meiller type 275/1 PTO gearbox-dependent, Dosing device for rear wall tipping bridge, hydraulic connection at the rear Bjdpfjucizljx Aptelp