Used Three-Phase Servomotor for sale (9,491)

Condition: good (used), Year of construction: 2004, functionality: fully functional, IRLE IRD 1600 CNC End finishing machine Manufacturer: IRLE, Type: IRD 1600 CNC Year of manufacture: 2004, Control: Max. workpiece diameter: 1,625 mm Min. workpiece pipe diameter: 406 mm Max. workpiece pipe length: 13,200 mm Min. workpiece pipe length: 6,000 mm Min. pipe wall thickness: 12 mm Max. pipe wall thickness in copying mode: approx. 40 mm Max. pipe wall thickness in CNC mode: 70 mm Max. pipe weight: 250 kN Height between the hall floor and the pipe inlet: 800 mm Overall machine length: approx. 24,000 mm Overall machine width: approx. 4,100 mm Overall height from floor to top of clamping fixture: 5,000 mm Machine weight: approx. 700 kN 01 - Intermediate carriage with travel drive Carriage length: approx. 3,950 mm Carriage width: approx. 1,800 mm Carriage height incl. undercarriage: approx. 600 mm Travel speed on the base rails: 500 - 5,000 mm/min 01 - Intermediate carriage with travel drive Carriage length: approx. 3,950 mm Carriage width: approx. 1,800 mm Carriage height incl. undercarriage: approx. 600 mm Travel speed on the base rails: 500 - 5,000 mm/min 02 - Headstock Rotational speed range of the faceplate: 7 - 27 - 105 min" Motor speeds: 300 - 1,150 - 4,500 min" Lrsdpfx Abszqun Ue Ust Motor power: 100 kW Motor power in S1 operation: 14.3 - 129 - 105 kW Max. torque of the faceplate in S1 operation: 33,000 Nm Rated speed: 27 min" Diameter of the main spindle in the front bearing: 300 mm 03 - Faceplate, X-axis Faceplate diameter: approx. 1,950 mm Travel distance of the NC tool holder: approx. 650 mm Feed rate of the adjustable tool holder: 0.5 - 1,500 mm/min (infinitely adjustable) Max. achievable feed force: 25 kN 04 - Feed drive; Z-axis Feed travel of the headstock on the machine bed: 800 mm, infinitely variable Three-phase controlled servomotor: 0.5 - 200 mm/min Rapid traverse speed: 1,500 mm/min Feed force: 30 kN Torque of the feed motor Mt = 27 Nm 05 - Pipe clamping mandrels Clamping range: 406 - 1,625 mm Pipe weight per mandrel: 150 kN Adjustable clamping force: 10 - 200 kN Max. adjustment speed of the centrally adjustable clamping crossbars: 600 mm/min

Condition: used, Year of construction: 2021, functionality: unexamined, Metal Band Saw Automatic Daiß + Partner HBA 320 SG Power-Line, HBA 320 SG Power-Line, Year of complete overhaul: 2021, mitre saw in 2-column design, drive power: 240/400 Volt, 2.2 kW frequency motor, cutting speed: 15 - 105 m/min, reinforced gearbox for high cutting performance, hydraulic system flow rate l/min, electrics: 240/400 Volt, 50 Hz three-phase power, control voltage: 24 Volt DC, automatic feed length: 8,400 mm (in combination with PS 210: 600 mm), multiple feed standard: 2-fold, maximum workpiece support weight: 2000 kg, maximum transport force: 1000 kg, transport frame repeat accuracy: approx. 0.02 - 0.04 mm, mitre cut angle accuracy: approx. 0.05 mm at 100 mm diameter for St 37 material, saw blade dimensions: 4400 x 34 x 1.1 mm, blade tension: constant tension via spring set, weight: 2330 kg. Dimensions (L x W x H), Features: - 1 control cabinet opposite - 1 CNC control PS 95 - 2600 x 2200 x 1950 mm - 2-axis control for feed and mitre adjustment - 1 frequency drive 2.2 kW - 1 Daiß+Partner Power-Box - 1 motor-driven chip brush - 1 stepless drive via frequency converter motor - 1 micro-cooler instead of coolant unit - 1 hydraulic blade tensioning - 1 saw blade breakage monitoring Lodeyr Ifwopfx Ab Usrt - Inspection under power possible

Condition: good (used), rotational speed (max.): 2,050 rpm, rotational speed (min.): 45 rpm, type of input current: three-phase, table length: 600 mm, table width: 210 mm, Used conventional milling machine Make: Metba Model: MB-1 Features a 3-axis dimension display. Table: 600x210mm Travel: - Longitudinal with motor / Manual table: 290mm / 300mm - Vertical manual with bellows / without bellows: 270mm / 320mm - Vertical motorized with bellows / without bellows: 260mm / 310mm - Cross travel of the headstock, manual: 180+120mm Automatic feeds: - Vertical and longitudinal: 15 to 500 mm/min. - Slow feed: 7 mm/min. - Rapid traverse: 1200 mm/min. Ljdpfxjz Dtw Se Ab Uort Speeds: 12 (From 45 to 2,050 rpm) Motor power: 5Hp (Three-phase 380V) Headstock type: Swivel / Universal (accepts arbor or vertical headstock). Common uses: Machining of small/medium-sized parts, prototyping, and maintenance or restoration work. Includes: - Vise with swivel - Collet chuck with various sets of collets - Various milling tools (See photographs of the material on the floor)

Condition: excellent (used), Year of construction: 2013, operating hours: 30,533 h, functionality: fully functional, clamping force: 900 kN, screw diameter: 30 mm, displacement volume: 106 cm³, plate length: 630 mm, plate height: 580 mm, total length: 4,000 mm, total width: 1,500 mm, total height: 2,200 mm, overall weight: 4,100 kg, Equipment: documentation/manual, BATTENFELD HM 90-210 Stock No.: 503672 Manufacturer: Wittmann Battenfeld Type: HM 90-210 Control System: UNILOG B6 Year of Manufacture: 2013 Operating Hours: 30533 h Technical Data - Clamping Unit Clamping Force: 900 kN Tie Bar Distance h x v: 420 x 370 mm Platen Size h x v: 580 x 630 mm Minimum Mold Height: 450 mm Maximum Mold Height: 925 mm Opening Stroke: 475 mm Ejector Stroke: 150 mm Ejector Force: 41 kN Centering of Moving Platen D: 125 mm Centering of Fixed Platen D: 125 mm Mold Weight: 800 kg Technical Data - Injection Unit Screw Diameter: 30 mm Injection Volume: 106 ccm Injection Pressure: 2042 bar Screw Length: 22 l/d Screw Stroke: 150 mm Screw Speed: 372 rpm Screw Torque: 490 N Free Injection Rate: 103 g/s PS Number of Heating Zones: 4 Nozzle Distance: 250 mm Dimensions & Weight Machine Dimensions L x W x H: 4m x 1.5m x 2.2m Total Weight: 4100KG Equipment Screen text in German CEE socket 16A CEE socket 32A Hydraulic core pull, 2x Air valve, 1x Leveling elements Plasticizing unit, highly wear-resistant and corrosion-resistant Screw drive with three-phase servomotor Ethernet interface EUROMAP 13 interface EUROMAP 67 Handling interface Interface for color dosing unit Interface for temperature control unit Ledpfxjz A A Hyo Ab Uort Schuko socket 10A Mold heating, 8x

Condition: ready for operation (used), functionality: fully functional, overall weight: 2,200 kg, total length: 2,500 mm, total width: 500 mm, total height: 1,200 mm, Spline broaching machine (internal broaching machine) VEB Maschinenfabrik "John Schehr", Meuselwitz, year of manufacture approx. 1955, with extensive accessories Condition: functional Year of manufacture: approx. 1955 Location: West Saxony Price: €3,000 (negotiable) Technical data: Manufacturer: VEB Maschinenfabrik "John Schehr", Meuselwitz, Leipzig district Manufacturing number: 6171 Total weight: approx. 2.2 t Broaching length: approx. 1,000 mm Type of current: three-phase, 50 Hz Operating voltage: 220 V Lrsdpfx Ajzyl E Nsb Uot Accessories: Extensive stock of broaching tools (various spline shapes/sizes) available Description: For sale is a historical spline broaching machine (horizontal internal broaching machine) from VEB Maschinenfabrik "John Schehr", Meuselwitz – a well-established, internationally recognized East German machine tool manufacturer. The machine is used to broach splines (e.g. keyways) in bores using broaching tools and has a broaching length of approximately 1,000 mm. The scope of delivery includes an extensive stock of broaching tools in various designs – a significant added value, as corresponding tools are hardly available on the market anymore. The machine is functional. Inspection and functional testing at the location in West Saxony are possible by arrangement. Price: €3,000 (negotiable) Other machines available from site liquidation Site takeover negotiable

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, power: 4.4 kW (5.98 HP), cutting height (max.): 6,000 mm, saw blade diameter: 500 mm, tilt adjustment saw blade: 90 °, rotational speed (max.): 2,800 rpm, On sale Pertici saw that is no more required. wo headed automatic saw for cutting aluminium profiles. Saw blade diameter: 500 mm Max cutting lenght: 6000mm Min cutting lenght: cca 330 mm Engine power: two three-phase motors, each one 2,2 kW (summary4,4 kW), 2800 rpm Head tilt: 90-45° Year of production : 2016 Price: 9300€ Ledpfx Aboztc Dco Uert The machine can be seen in Rugvica, Croatia (nearby Zagreb).

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 22,372 h, laser hours: 11,345 h, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 8 mm, overall weight: 16,000 kg, total length: 11,600 mm, total width: 5,200 mm, total height: 2,200 mm, working range: 4,00,02,000 mm, Equipment: cooling unit, Standard Features: • Enclosed machine frame with integrated laser unit • Laser unit: TruFlow 2000 CO₂ laser with high-frequency excitation, maintenance-free turboradial blower, reflector telescope, cooling unit, logbook function • Automatic pallet changer • Longitudinal conveyor belt for small parts/waste • Drive: Maintenance-free three-phase servo motors • Cutting head quick-change device Laser cutting head with 5" lens and laser cutting head with 7.5" lens • Programmable cutting gas pressure setting • ControlLine capacitive height control and process control • Automatic focus adjustment with FocusLinePlus • Laser power control • Positioning laser • NitroLine high-pressure cutting • Fast processing with SprintLine • Automatic production of smaller holes Ledpfsv Sm Rusx Ab Uort • PlasmaLine plasma sensors • Automatic sheet metal surface and edge detection • Programmable Performance cycles • Microweld • Spray device for safe thick sheet processing • Automatic blow-off system • Residual heat extraction • Sinumerik 840D control system: Open PC-based control, easy operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice • TruTops Laser lite workshop programming Safety: • Multi-beam light barriers, fully encapsulated and ventilated beam guidance, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin • RJ45 network connection via installation via teleservice • 3.5" floppy disk drive • TFT color display More powerful lasers: • TruFlow 4000, including NitroLine Plus, nitrogen beam tube ventilation and lens monitoring sensors Extended machine equipment: • PierceLine Process Control System • A total of 2 Machine auxiliary pallets, structural steel webs • Crane-mounted traverse for manual pallet handling • Pneumatic cutting

Condition: used, Year of construction: 1996, CNC TOOL AND CUTTER GRINDER Manufacturer: Alfred H. Schütte, Cologne, Germany Model: WU 405 Year of manufacture: 1996 Serial number: Series 12, No. 09 Machine type: Five-axis CNC universal tool and cutter grinder CNC control: NUM Drive system: Siemens SIMODRIVE 611 Axis travel: - X axis: 540 mm - Y axis: 280 mm - Z axis: 260 mm - A/W rotary axis: approximately 355° - C-axis grinding-head rotation: 330° - Manual grinding-head inclination: ±25° Working range: - Centre height: approximately 200 mm - Maximum clamping length between centres: approximately 700 mm - Maximum number of divisions: 999 - Programmable lead range: approximately 0.5–10,000 mm Feed ranges: - X axis: 0.1–10,000 mm/min - Y axis: 0.1–10,000 mm/min - Z axis: 0.1–5,000 mm/min Grinding spindle: - Double-ended grinding spindle - Spindle-speed range: approximately 1,800–12,000 rpm - Maximum spindle speed: 12,000 rpm - Frequency-controlled spindle motor Electrical data: - Rated operating voltage: 400 V - Power supply: three-phase - Frequency: 50 Hz Lsdpjzxhqrefx Ab Ujrt - Rated current: 18 A - Electrical drawing number: PE-WU400-1209 - CE marked Approximate machine data: - Machine weight: approximately 3,150 kg - Fully enclosed grinding area - Five CNC-controlled axes - Suitable for manufacturing and resharpening cutting tools - Designed for grinding medium and large workpieces and for grinding between centres

Condition: used, Year of construction: 2017, machine/vehicle number: 17200241, usable tank capacity: 40 l, cooling capacity: 1.6 kW (2.18 HP), input voltage: 400 V, total width: 590 mm, total length: 949 mm, total height: 1,292 mm, Used Tradilevain TL-40 sourdough fermenter, designed for the preparation, storage, and regular management of sourdough in a professional bakery. Maximum usable capacity of 40 L, ideal for artisan bakeries, production laboratories, and bakeries using natural sourdough daily. Tank volume of 80 L with a maximum total capacity of 50 L, allowing for comfortable handling of sourdough preparations. Minimum usable capacity of 20 L and minimum total capacity of 25 L, practical for adjusting production according to the bakery's actual needs. 2 drain taps to facilitate draining, cleaning, and daily use of the sourdough. Loading height of 1120 mm, designed for ergonomic use in a professional laboratory. Compact dimensions: 590 x 949 x 1292 mm, allowing for easy integration into a bakery production space. 400 V power supply with a power of 1.6 kW, suitable for a professional three-phase installation. Weight of 200 kg, guaranteeing a robust and stable construction for regular use in a commercial environment. Year 2017, serial number 17200241, reference TL-40. Used professional equipment, suitable for bakers who wish to integrate or develop sourdough production with specialized equipment. Ideal solution for Proculis: a reliable, compact, and functional sourdough fermenter to improve work organization and consistency of preparations. Used Tradilevain TL-40 40 L sourdough fermenter The used Tradilevain TL-40 sourdough fermenter is a professional piece of equipment intended for bakers, pastry chefs, and production laboratories who wish to work with natural sourdough with more regularity, comfort, and organization. Thanks to its maximum usable capacity of 40 liters, it allows for the preparation and storage of a quantity adapted to the daily needs of an artisan bakery or a professional production facility. This model is particularly interesting for professionals who want to incorporate sourdough into their range of breads, improve the consistency of their preparations, or optimize fermentation monitoring. Its compact size, 80-liter tank, and two drain taps make it a practical solution for managing sourdough on a daily basis. Product: used professional sourdough fermenter Brand: Tradilevain Lsdpfx Ajzyqqqjb Ujrt Reference: TL-40 Maximum usable capacity: 40 L Minimum usable capacity: 20 L Maximum total capacity: 50 L Minimum total capacity: 25 L Tank volume: 80 L Number of taps: 2 drain taps Loading height: 1120 mm Dimensions: 590 x 949 x 1292 mm Voltage: 400 V Power: 1.6 kW Weight: 200 kg Year: 02/17/2017 Serial number: 17200241

Condition: used, Year of construction: 2012, We offer this used OMAG MOD. CONF. DIVA-5 OMAG STICK PACKAGING MACHINE mod. DIVA/5, year of construction 2012. Model: MOD. CONF. DIVA-5 Serial number: 2298 Year of manufacture: 2012 Accident protection guards compliant with with CE norms. Required electric power: three phase 220/380 V, 50 60 Hz. Required compressed air: 6 Atm. Frame in welded steel and painted with epoxy resin paint. Colour code: RAL 9006 (OMAG standard). Ledpfex Rw Hvox Ab Uert If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 1991, machine/vehicle number: 78-08/093-91, functionality: fully functional, planing width: 400 mm, Combined Planer Thicknesser Felder AD 6-41 Year of manufacture: 1991 S/N 78-08/093-91 In good condition Planing specifications Planing width: 410 mm Thicknessing width: 404 mm Thicknessing height: approx. 4 – 220 mm Maximum chip removal: 5 mm Lrjdpfx Aeywfbusb Uet Cutter block / cutting data Cutter block diameter: approx. 86 mm Number of knives: 2 Cutter block speed: approx. 4,700 rpm Table / Construction Total length of planing tables (standard): approx. 1,680 mm Feed Feed speed: stepless, approx. 6.5 m/min with digital height adjustment Electrical data Motor power: 4.0 kW (5.5 HP) Voltage: 400 V three-phase (typical for this series) Extraction connection approx. 120 mm Weight approx. 800 kg

Condition: used, Year of construction: 1983, functionality: fully functional, feed length X-axis: 460 mm, feed length Y-axis: 200 mm, overall weight: 1,300 kg, Universal milling machine Kunzmann UF6/3 Year of manufacture: 1983 Lrsdpfxozmfz Do Ab Ust The machine is in good condition, and the spindle runs very smoothly. The feed motor has been fitted with new carbon brushes, and the Z-axis spindle has a new telescopic spring. The cam control system in 3 axes is perfect for the production of small series. --- Price net plus VAT (shown on invoice) --- Travel distances, feed/manual - Longitudinal: 450/460mm - Transverse: 190/200mm - Vertical: 400/410mm The milling head can be adjusted by approximately 100mm by hand, which increases the transverse working area. Table clamping surface (surface with 3 T-slots): 860 x 265 mm T-slots: 14mm Spindle speeds, horizontal: 30-1280 RPM Spindle speeds, vertical: 50 - 2150 RPM Feeds: 0-1000 mm/min, stepless Feed, vertical: 0-250mm/min Rapid traverse: 1000 mm/min Vertical milling head with fixed quill Tool holder: SK40 (Ott system) Distance, table - spindle lower edge: 440mm Accessories: - Manual - Counter support for horizontal milling - Cam control system in 3 axes (adjustable cams for switching off the feed) - Chip tray Drive power: 2.6/3.2 kW Connection: 400V three-phase Space requirement: approx. 1250 x 1200 x 1800 mm Weight: approx. 1300 kg Shipping by freight forwarder on request.

Condition: good (used), functionality: fully functional, Robust RAPID PK 100 table saw in a solid design, featuring a sliding table and adjustable fence system. The saw blade can be tilted up to 45°. With a saw blade diameter of 250 mm, the maximum cutting height is approximately 75 mm. The cutting width to the right of the saw blade is approximately 600 mm. The saw arbor is driven by a narrow V-belt. A saw blade is included in the scope of delivery. Technical data: Motor power: 3 kW Three-phase motor, protection class IP54 Motor speed: 2,860 rpm Saw arbor drive via narrow V-belt Saw arbor speed: 5,200 rpm Table size: approximately 850 × 700 mm Cutting width to the right of the saw blade: approximately 600 mm Cutting height: approximately 75 mm with a Ø 250 mm saw blade Saw blade can be tilted up to 45° Dust extraction port on the rear of the machine: Ø 100 mm Dimensions: approximately 800 × 1,200 × 1,400 mm Lodpfxez Eh Nrs Ab Uert Weight: approximately 250 kg Equipment: Sliding table Length/cross stop with scale Parallel fence Tiltable saw blade up to 45° Dust extraction connection Ø 100 mm Includes saw blade The machine can be inspected and tested under power after arranging an appointment. Transport is possible for an additional charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information is without guarantee.

Condition: like new (used), Year of construction: 2018, machine/vehicle number: 22-7254, functionality: fully functional, operating hours: 30 h, power: 2.2 kW (2.99 HP), input voltage: 380 V, input current: 10 A, input frequency: 50 Hz, type of input current: AC, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,010 mm, travel distance Z-axis: 300 mm, workpiece length (max.): 3,500 mm, workpiece width (max.): 2,200 mm, workpiece weight (max.): 300 kg, number of axes: 3, number of slots in tool magazine: 1, controller manufacturer: Kinetic-NC, actuation type: electric, total height: 1,900 mm, total length: 3,700 mm, total width: 2,700 mm, overall weight: 1,200 kg, table length: 3,500 mm, table width: 2,200 mm, year of last overhaul: 2024, Equipment: CE marking, documentation/manual, CNC-Step RaptorX-SL 3200/S20 gantry CNC router (2018) – approx. 30 operating hours, production-ready Immediately available CNC gantry router from CNC-Step, built 2018, in as-new condition. The non-resettable hour meter reads only ~30 hours – the machine is practically unused and shows no wear. Originally commissioned by CNC-Step (OEM). Largest standard model of the RaptorX-SL range: travel 3200 × 2010 × 300 mm, clamping area approx. 3.5 × 2.2 m, variable bridge height 150/300/400 mm. Heavy steel frame, Hiwin/Bosch Rexroth linear guides, planetary-geared drive with Benezan BEAST stages – rigidity and repeatability for professional continuous use (furniture/interior fit-out, sign-making, model/prototype work, composites). Fully production-ready, incl.: • Teknomotor Ceramic spindle 2.2 kW (18,000–24,000 rpm, ER25, air-cooled) • KinetiC-NC control with unlimited full-version license (transferable) • Vectric VCarve Pro license • PC, monitor, handheld pendant • Extensive tooling package (ER25 collets Ø2–15 mm, solid-carbide cutters, Ø60 Tornado face mill) Lrodozfv T Ijpfx Ab Ujt • 400 V three-phase connection Technical data: • Travel X/Y/Z: 3200 × 2010 × 300 mm • Spindle: Teknomotor Ceramic 2.2 kW, 18,000–24,000 rpm, ER25, air-cooled • VFD: Toshiba VF-nC3 • Drive: stepper motors + planetary gearing, 4× Benezan BEAST • Guides: Hiwin / Bosch Rexroth 20 mm • Control: KinetiC-NC (CncPod, Ethernet) • Power: 400 V three-phase (CEE) · Weight: approx. 1,160 kg • Serial number: 22-7254 Original 2017 invoice available (buyer data anonymized). Base-machine list price: €28,198 net (€33,555.62 incl. German VAT) – excluding spindle and VCarve license. Here fully equipped for a fraction of that. Live demonstration under power by appointment. Collection, dismantling and transport by arrangement. Location: Oploo (NL). Price: €17,000 net (excl. VAT)

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 060308, functionality: fully functional, power: 6.9 kW (9.38 HP), input voltage: 400 V, input current: 19 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 40 °C, number of chambers: 1, control type: PLC-controlled, Equipment: CE marking, documentation/manual, GIARDINA MOS® 3D Static Microwave Drying Chamber Professional static drying system designed for the drying of coated wooden components, particularly for water-based coatings. The GIARDINA MOS® 3D technology uses microwave energy for controlled and homogeneous three-dimensional drying. After removal of the water component from the coating, a low-temperature hot-air circulation phase completes the drying and curing process. The system is suitable for three-dimensional and assembled wooden components, including furniture, chairs, window and door components, profiles and turned parts. Technical data: Manufacturer: GIARDINA FINISHING S.r.l. Model: MOS® 3D Year of manufacture: 2006 Serial number: 060308 Electrical power: 6.9 kW Supply voltage: 400 V Frequency: 50 Hz Rated current: 19 A PLC controlled Air recirculation motor: 3 kW / 4 HP CE marked Original operating and maintenance documentation as well as electrical diagrams are available. Lrodpfx Abjztvf Te Ujt The machine was recently taken out of production and is currently dismantled and stored in a dry warehouse. It was in regular operation prior to being taken out of service.

Year of construction: 2010, condition: used, machine/vehicle number: 15604095, Used Bongard BFC 600x800 professional proofing cabinet, designed for bakeries, pastry shops, and laboratories seeking a reliable solution for controlled proofing and fermentation management. Capacity suitable for 600x800 mm trolleys: this model allows the use of 2 trolleys in the 600 x 800 mm format, ideal for organizing a regular production cycle in a bakery. Ledpfx Aozyryyjb Uert Proofing function with integrated heating: heating power of 2 kW, providing stable and uniform proofing for bread dough and viennoiseries. Cold management / controlled fermentation: 2.32 kW cooling with R404A refrigerant, allowing for fermentation delay and better production organization. Professional power supply: 400 V three-phase – 50 Hz – 6 A connection, with a connected electrical power of 2.20 kW. Robust and well-regarded model: proofing cabinet from Bongard, a renowned manufacturer of professional bakery equipment. Technical identification: model BFC 600x800, plate reference 4CE12CH 4PC, serial number 15604095. Year of manufacture: 2010. Ambient operating temperature: up to 32 °C. Condition: used equipment, available according to the condition visible in the photos and on the technical label. Recommended applications: proofing of breads, viennoiseries, leavened doughs, and fermentation management in artisan bakeries or professional laboratories.

Condition: like new (used), Year of construction: 2023, operating hours: 10 h, functionality: fully functional, Automatic slicing machine CHANTALAT-PROCESS with conveyor – Very little use. Professional, fully automatic slicing machine CHANTALAT-PROCESS, purchased new in 2023. The machine was used only for a few tests and never used in production because it ultimately did not meet our requirements. Very good overall condition. Casters have been added to the base to facilitate the movement of the machine. Technical specifications: Stainless steel construction Vertical blade Ø 330 mm Automatic horizontal carriage Output conveyor Stacking, aligning, and offsetting device for slices Cycle rate: approximately 25 to 55 movements/minute 99 programmable slicing programs Slice thickness: 0 to 10 mm Maximum stacking height: 80 mm Cutting length: 255 mm Cutting height: 195 mm Carriage dimensions: 275 × 360 mm Conveyor dimensions: 880 × 280 mm Electrical power: 0.6 kW Power supply: three-phase 400 V – 50 Hz – 3P+N+T Noise level: less than 70 dBA Dimensions: approximately 1270 × 853 × 1330 mm Weight: approximately 130 kg New price in 2023: €24,284 excluding VAT. Documentation available. Machine available immediately. Price: €15,000 excluding VAT, negotiable. Available for viewing by appointment. Additional information and photos available upon request. Lrjdpfx Abeztz Nqe Ust

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 490000709, pressing force: 25 t, bale length: 1,200 mm, bale width: 780 mm, bale height: 700 mm, bale weight: 280 kg, total width: 1,700 mm, total height: 2,370 mm, total length: 1,248 mm, type of input current: three-phase, input voltage: 400 V, input current: 8 A, overall weight: 1,210 kg, power: 4 kW (5.44 HP), input frequency: 50 Hz, Turn your waste paper into money! With the HSM V-Press 825 plus pro, you can transform loose cardboard and waste paper into compact, marketable bales. We sell our own cardboard bales to a recycling company – take advantage of the potential of your recyclable materials! The purchase conditions depend on the material quality, quantity, and regional buyer. At the same time, you reduce cardboard piles, gain valuable storage space, and create order in your business. We are selling our vertical baling press, the HSM V-Press 825 plus pro, model year 2016, directly from our facility. Your advantages: • Fully functional • Maintained by a specialist company • DEKRA-certified • Suitable for cardboard, paper, and film • Inspection and demonstration possible while powered Ideal for production companies, warehouses, mail-order businesses, and commercial enterprises that want to collect their packaging waste in a space-saving manner and prepare it for recycling. Technical data: • Model: HSM V-Press 825 plus pro Lsdpoz Ad Rpefx Ab Uort • Year of manufacture: 2016 • Pressing force: 250 kN (approx. 25 tons) • Bale dimensions: 1,200 × 780 × max. 700 mm (L × W × H) • Bale weight: up to 280 kg, depending on the material • Motor power: 4.0 kW • Power connection: 400 V three-phase / 50 Hz • Rated current: 8.5 A • Machine dimensions: 1,700 × 1,248 × 2,370 mm (W × D × H) • Machine weight: approx. 1,210 kg • Machine number: 6152.314 • Serial number: 490000709 See for yourself how the press works! Arrange an inspection appointment now in Simmozheim near Stuttgart. Send us your desired date via "Send Inquiry" or call us directly.

Condition: good (used), Year of construction: 2018, travel distance X-axis: 800 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 406 mm, spindle speed (max.): 5,100 rpm, spindle speed (min.): 10 rpm, table width: 230 mm, table length: 1,245 mm, type of input current: three-phase, overall weight: 950 kg, input voltage: 380 V, Used turret milling machine Brand: Optimum Model: OPTIMILL MF 2V Year: 2018 Weight: 950 kg Swiveling head with Siemens variable speed drive. 3-axis dimension display. Type: Turret milling machine with swiveling head ±90° (left/right) and tilting ±45°. Spindle taper: ISO 40 (DIN 2080 / DIN 69871) Speeds: Continuous electronic variable speed drive (typically 10 to 5,100 RPM). Table surface: 1,245 x 230 mm Lodpfx Aboz Ducvs Uert Travel (X / Y / Z): 800 mm / 305 mm / 406 mm Motor power: 3.7 kW (Three-phase 380V) Automatic quill feeds: 3 Automatic motorization in X and Y axes with variable speed control and rapid traverse mode. Machine complies with CE regulations.

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: h288 di, power of vacuum pump: 11 W, overall weight: 4,900 kg, Resta Automatic Mattress Packaging Machine: Integrated Compression and Decompression The Resta mattress packaging machine is an automatic packaging machine designed for the industrial packaging of mattresses. In practice, on your production line, this machine performs double packaging with mattress compression followed by decompression, while also protecting it in a suitable film. Advantages of Mattress Packaging in Production and Distribution First and foremost, an efficient mattress packaging machine reduces transport volume by 70 to 80%. The mattress remains compressed during transit and then returns to its original shape upon arrival. In practice, you save storage space and reduce logistics costs. Automated Compression: Mattresses are bagged in PVC or plastic film, without manual intervention. Easy Decompression: The mattress returns to its normal shape in the store or at the customer's location. Optimized Transport: Significant reduction in volume, with more space in the truck and in storage. Presentation for Sale: Final presentation of the mattress in suitable commercial conditions. Vacuum Packaging Machine: Protection and transport of the mattress. What truly changes in production is material compatibility. The Resta mattress packaging machine adapts to different types of mattress films, including PVC film and plastic film, and ensures an airtight seal. The fully automatic packaging process avoids manual handling, limits the risk of tearing, and maintains consistent quality. Compatibility with Spring and Foam Mattresses This is particularly beneficial when your production involves both spring mattresses and foam mattresses. This packaging machine handles both types without major reconfiguration. The equipment can accommodate both bagged mattresses and compressible structures, which simplifies workshop organization. Spring Mattresses: Compression without damage to the springs, thanks to a progressive hydraulic system. Foam Mattresses: Adaptation tailored to the product, with rapid shape recovery after compression. Compatibility with PVC film and other specialized packaging films. Professional Sealing: Airtight closure of the film to protect the mattress during transport. Industrial Applications and Mattress Packaging Processes In practice, on an industrial mattress packaging line, this automatic Resta packaging machine integrates after the… Special Feature: Enables double, independent packaging (two separate bags) within the same footprint as a standard packaging machine, thanks to two superimposed polyethylene rolls. Also allows for single or customized packaging (two different rolls, automatic change according to programming). The feed conveyor and disconnectable press also allow for packaging of bed bases. Manual and/or automatic operation, interfaceable with barcodes or RFID on the production line. Official Technical Specifications: Weight: 4,900 kg Electrical consumption: 11 kW Compressed air: 6-10 bar Power supply: 400V – 50Hz three-phase Available Options: Press with 2 or 4 cylinders Ljdpfx Abezmpvro Uert Reinforced hoist Motorized cradle for additional customization rolls Kit for disposal of polyethylene waste

Condition: like new (used), Year of construction: 2021, operating hours: 400 h, functionality: fully functional, machine/vehicle number: EK210083, total length: 1,500 mm, total height: 2,250 mm, total width: 2,000 mm, pressure: 200 bar, type of input current: three-phase, empty load weight: 250 kg, input voltage: 400 V, fuel: electricity, input frequency: 50 Hz, EKINSA LAVA GRG industrial automatic washing machine, model ET115, year 2021, designed for cleaning the interior and exterior of GRG/IBC tanks. Lrjdozy Ni Sepfx Ab Uet It features an automatic interior washing system with a rotating head and nozzles, as well as an exterior washing system. It can operate in manual and automatic modes via an HMI screen. It includes a water tank with level control, thermostat, and heating elements. Electrical supply: three-phase 3×400 V + N, 50 Hz. Power rating as specified by the manufacturer: 15 kW. Manufacturer: EKINSA Model: ET115 Reference: ET115.21-50.E1 Serial number: EK210083 Year: 2021 CE marking.

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, inner diameter: 365 mm, wall thickness: 10 mm, rotational speed (max.): 2,900 rpm, The GEA Westfalia Separator CA 365-03-00 is a high-performance, three-phase decanter designed for the efficient separation of liquids and solids. With a drum diameter of 354 mm and an extended drum length, this model offers optimized separation performance. DRUM AND HOUSING DESIGN The decanter drum is configured in a flat-cone design, enabling effective phase separation. The housing is manufactured in a standard design, facilitating integration into existing systems. LIQUID DISCHARGE Liquids are discharged with the light phase unpressurized and the heavy phase under pressure. This functionality ensures reliable and continuous removal of the separated phases. DRIVE TYPES The drum is driven via a belt drive, while the screw is driven by a gearbox. These drive types provide stable and efficient decanter operation. The GEA Westfalia Separator CA 365-03-00 provides a reliable solution for the separation of liquids and solids in various applications. plus GEA WESTFALIA SAMR 5036 CENTRIFUGE CLARIFIER FOR A COMPLETE LINE FOR OILS. The units can be sold separately or as a complete line. ?v=nv23KAJFewE Ljdsy H Ixuepfx Ab Uert

Condition: used, Year of construction: 1984, operating hours: 29,950 h, functionality: unexamined, machine/vehicle number: 6051, Used BOGE screw compressor, model VEX 40D11, from industrial stock. Robust, proven technology with documented operating hours, control system, and cooling. Suitable for workshops, backup operation, or further use. Technical data: - Power: 30 kW - Volumetric flow rate: approx. 4.0 m³/min - Maximum pressure: 10 bar - Speed: 4,360 rpm - Connection: 380/400 V, three-phase - Current operating hour counter: 12,622.7 h - Documented previous counter reading: 17,326.4 h - Documented total hours: approx. 29,950 h - Base load/idle control via pressure switch FF142 Lrjdpfxezrn Aho Ab Ust - Switching range: 8.5–9.5 bar - WILO industrial circulation pump Condition: used and commensurate with its age. In operation until dismantling; no functional test currently performed, therefore functionality is unverified. Sold as is, as viewed, or according to the photos. Location: 65618 Selters (Taunus), Germany.

Year of construction: 2014, condition: repair required (used), functionality: limited functionality, • Production freeze dryer, Parker Freeze Dry 5-945-135, custom model, made to order for client’s specification; CE-marked, 400V 50Hz three-phase power. Nominal condensercapacity 453kg of ice. • Dual phase vacuum pump cluster, Busch, RA0255 main pump (max. 25A 400V) + WV1500 booster pump (max. 20A 400V), serviced 2023, overhauled 2021. • Heat control system, programmable, West ProVU + 4 x 6100+ • Five product carts, 27 heated shelves and approx.100kg capacity each (max. 50A 400V). • 2 Full tray sets (2x135 pieces), 18x26 inch, aluminum. • Outdoor cooling unit, cooling + hot gas de-icing, compressor rebuilt and overhauled 2022/2025. Max power consumption 50A 400V. cooling face measurements 4.6mx2.4mx1.3m Lrodpfx Abez Dz Rtj Uot measurements of the carts 20cmx120cmx70cm

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 621915, input voltage: 400 V, total length: 970 mm, total width: 1,910 mm, total height: 1,430 mm, input current: 22 A, input frequency: 50 Hz, empty load weight: 1,055 kg, overall weight: 1,347 kg, type of input current: three-phase, power: 12.1 kW (16.45 HP), Set of 2 dough mixers Set of 4 removable bowls Set including 1 lifter Removable bowls on a trolley Dimensions per mixer: 970 x 1,910 x 1,430 mm Height with head raised: 2,140 mm Flour capacity per mixer: 100 kg Dough capacity per mixer: 160 to 200 kg Capacity varies according to hydration rate Bowl volume: 285 L Power per mixer: 10.2 kW Power supply: 3 x 400 V 50 Hz three-phase Net weight per mixer: 1,055 kg Gross weight per mixer: 1,347 kg Packaging: 2,050 x 1,270 x 1,730 mm Bowl and spiral made of AISI 304 stainless steel Base and grating made of AISI 304 stainless steel Lrjdpezrlrgjfx Ab Ust Reinforced frame made of steel and cast iron Two independent motors Two programmable speeds Bowl reversing in first gear Hydraulic head lift Hydraulic trolley locking Dual digital timer