Used Tire 6 50 16 for sale (79,231)

Year of construction: 2014, condition: ready for operation (used), A complete CNC double gantry plasma cutting system Microstep with oxyfuel torch for nesting, bevel cutting and tube processing is available. 1) Plasma cutting system, max. processing length: 16500mm, max. processing width: 2500mm, max. processing width including shaft: 3700mm, max. material thickness VA/structural steel: 20mm/40mm, number of gantries: 2. Gantry 1: with a plasma rotator and a Kjellberg HiFocus 280i neo plasma cutting source. Gantry 2: fully automatic oxy-acetylene torch for possible equipment of a second torch carriage. Pipe cutting device: pipe diameter range: 30mm-700mm, max. pipe length: 16500mm, operating hours: approx. 15000h. 2) Filter system Donaldson Cyclopeel DFPRO 16, volume flow: 16000m³/h, filter elements: 16. Documentation available. On-site inspection is possible. Expected to be available from the end of 2025/beginning of 2026. Pictures are from commissioning in 2014. Hfjdpfswmqwyjx Aftsl

Condition: ready for operation (used), Year of construction: 2009, A wood dust extraction and filtration system Krämer for saw lines is available. 1) Wood dust extraction unit Krämer VKA-P 100/650/55, air volume flow: 27000m³/h, pressure increase: 3800Pa, motor power: 55kW, V-belt length: 3550mm. 2) Filtration unit Krämer GFS Shake 160/25/250, filtration capacity: 30000m³/h, filter material: polyester needle felt, material discharge: TFS40/10/1.1. 3) Fan Krämer VFM-R 45/250/3, air volume flow: 3000m³/h, pressure increase: 2500Pa, motor power: 3kW. 4) Fan Krämer VFM-P 42/200/4, air volume flow: 2500m³/h, pressure increase: 3000Pa, motor power: 4kW. 5) Separator tank/filter hopper Krämer. 6/7) 2x axial fans. Including pipes and peripheral equipment. The motor flange on the discharge motor is defective. Documentation available. An on-site inspection is possible. Hfsdoxl Elgspfx Aftol

Condition: like new (used), - Capacity: 1600 x 50 tons - NC control (touchscreen) - 2 hydraulic cylinders Hjdpfjzfv Ufjx Aftofl - Foot pedal operation - Light curtain safety system - Emergency stop - Lighting - Documentation - 400V

Condition: used, Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 500 x 6 mm Hfodpfx Afsgiiwxjtol -Inside: Ø 50 mm -Hole circle: Ø 100 x 17 mm -Number of teeth: 160 teeth -Number: 8x saw blades available -Price: per piece -Weight: 6 kg/piece

Condition: used, Clyde Denseveyor Hfjdozvgu Repfx Aftsl Model 50/12/6 Denseveyor Features the "dome valve" on the feed inlet and product outlet for optimum performance and reliability. Capacity: 1420 litres Inlet: 300 mm dia Conveying Pipeline: 150 mm (6”) NB Vessel No. 5669/2 Year of Manufacture: 2007 Includes dome valves on inlet, outlet and vent line. Overall height of vessel including isolation valve above inlet: 2960 mm. Dense phase pneumatic conveying of powders and granules. 2 machines available. Also, a 70/12/6 Denseveyor.

Year of construction: 2001, condition: ready for operation (used), Various lettershop and paper converting units are available. 1) MBO ET46 corner conveyor table, year of manufacture: 1991. 2) MBO ET46 corner conveyor table. 3) MBO Z2 knife folding unit. 4) Herzog + Heymann knife folding unit, year of manufacture: 2001. 5) MBO T45-2-X knife folding unit. 6) Böwe 310 Systec cutting module. 7) Nagel Citoborma 490 Vario SBT multi-spindle paper drilling machine. 8) Hunkeler paper unwind stand. 9) Herzog + Heymann shingle delivery, year of manufacture: 2001. 10) MBO FWIII 52/4 folding unit. 11) MBO T45-2-45/4 folding unit. 12) MBO FWIII 52/6 folding unit. 13) Hunkeler ARAW 50/20 paper unwind stand. 14) Böwe separating cutting module. 15) Herzog + Heymann 2-pocket folding unit, year of manufacture: 2006. 16) Herzog + Heymann 4-pocket folding unit, year of manufacture: 2001. An on-site inspection is possible. Hfsdpfx Afeziphaetjl

Condition: ready for operation (used), Year of construction: 2006, operating hours: 68,590 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 50 mm, displacement volume: 393 cm³, Clamping force 1600 kN Mould opening force, max. 87 kN Travel force movable platen opening 45 kN Travel force movable platen closing 38 kN Size of mould platens (h x v) 820 x 845 mm Distance between tie bars (h x v) 520 x 520 mm Mould opening stroke 650 mm Mould height min 300 mm Max. daylight 950 mm Hydraulic ejector - stroke 150 mm Ejector force 23 kN Injection unit: Screw diameter 50 mm Ls/D ratio 20 Injection pressure 1892 bar Stroke volume 393 ccm Shot weight (PS) 358 gr. Injection rate 177 ccm/s Screw speed 265 1/min Plasticising rate max. 36,2 g/s Nozzle pressure 50 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 22 kW Installed heating capacity 16 kW Adjustable barrel heating zones 5 Reservoir capacity 489 ltr. Dimensions and weights: Dimensions of the machine ca. 5,50 x 2,00 x 2,20 m Total machine weight 6600 kg Max. mould weight 1862 kg Hodpfx Afeydp D Eetsfl Accessories: - Anti vibration pads - Krauss Maffei Robot LR100 X: 550 mm Y: 1200 mm Z: 2500 mm C: 0 - 90° Additional Options: - 1 x Air valve - 2 x core pull - Robot interface according to Euromap 67

Condition: used, spindle diameter 160 mm x-travel 4000 mm y-travel 2200 mm z-travel 1500 mm 270 mm spindle turning speed range 20-2000 U/min Control Heidenhain type TNC530i table surface area 3000x1600 mm table load 40 t spindle taper ISO 50 spindle motor 50 kW T-slot - width 28 mm number of T-slots 9 Maschine wurde überholt machine is retofit The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Hfodpfx Aoyq Swbsftel We look forward to your visit. Your Markus Hirsch Team

Condition: used, functionality: fully functional, HYDRAULIC VALVE Hedpfx Asxzqwtjftefl All our items have been inspected by the technical department.

Condition: like new (used), Year of construction: 2019, operating hours: 1,800 h, functionality: fully functional, machine/vehicle number: 142400, A powerful and reliable machine for industrial veneer processing. Robust construction, precise operation, and a suitable solution for operations that prioritize efficiency and consistent performance. The CrossRunner 1600/2500 model offers a working width of 1600 mm and a length of 2500 mm. Suitable for professional production and daily operation. Hjdpfxjzg Dl Ue Aftefl

Condition: like new (used), Year of construction: 2017, A complete welding system based on the KUKA KR 16 L8 arc industrial robot with KRC4 controller and Fronius CMT welding system. The system includes a KUKA KP1 positioner and a wire feeder with cooling. All main components are from 2017. The kit includes a cleaning device and a laser device for automatic torch geometry correction (Rotolab), as well as a Siemens safety PLC. Technical data: Industrial robot: Model: KUKA KR 16 L8 arc HW, Serial No.: 867099, Year of manufacture: 06/2017, Number of axes: 6, Payload: 8 kg, Reach: 2015 mm, Weight: 240 kg Positioner/Rotator: Model: KUKA KP1-HC1000R980, Maximum payload up to 1 t, Serial No.: 152228, Year of manufacture: 06/2017, Weight: 850 kg Hfedpfx Afoy Hktnstel FRONIUS welding machine: Type: TransPuls Synergic 400 CMT R, Serial No.: 28245623, Output: 400 A, with cooling unit Model: Fronius FK 4000-R FC, Serial No.: 28245627, Power supply: 400 V, Frequency: 50–60 Hz, Current: 0.6 A, Maximum pressure: 4 bar (0.4 MPa), Power: 2 kW, Protection class: IP23 Wire feeder: Model: Fronius VR 7000-CMT 4R/G/W/F++, Serial number: 28245629, Voltage U11: 55 V / 4 A, Voltage U12: 24 V / 2 A, Wire feed speed: 0.5 – 22 m/min, Welding current: – 400 A (100%), Protection class: IP23

Condition: used, Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Saw blade: Ø 500 x 6 mm -Inside: Ø 50 mm -Hole circle: Ø 100 x 17 mm Hodpfogiiw Hsx Aftofl -Number of teeth: 160 teeth -Number: 7x saw blades available -Price: per piece -Weight: 6,1 kg/piece

Year of construction: 2016, condition: ready for operation (used), This MAPLAN MFT 750/160 edition S was manufactured in 2016. It is a vertical injection moulding machine, ideal for precision plastic processing. Contact us for more information. Machine Benefits Technical Machine Benefits • Connected load: 84 kw • Nominal voltage: 3 x 400 v • Control voltage: 24 v • Safety distance: 310 mm • Overrun time: 128 ms • Overtravel: 62. 3 mm • Max platform height: 750 mm • Platform dimensions: 1850 x 1300 mm Hsdpfx Aex U Tihjftefl • The systems are fully functional and were used in 2/3-shift operation between 2017 and 2022. • The spray cylinders were resealed and the insulation panels replaced in 2023. Extra Information Machine still under power

Condition: used, functionality: fully functional, spindle mount: MK 5, drilling depth: 315 mm, height adjustment type: hydraulic, rotational speed (max.): 2,000 rpm, rotational speed (min.): 25 rpm, total width: 1,070 mm, total length: 2,500 mm, total height: 2,840 mm, table width: 500 mm, table length: 630 mm, overall weight: 3,500 kg, arm reach: 1,600 mm, For sale: ZJ Z3050×16/1 radial drilling machine. Hjdpfxszhbtro Aftsfl Robust radial drilling machine for drilling, reaming, countersinking, and tapping larger and heavier workpieces. Thanks to the long radial arm, the drill head can be positioned flexibly above the workpiece without the component needing to be constantly moved or re-clamped. This machine is equipped with hydraulic clamping for the arm, column, and drill head. The combination of the heavy-duty construction, the wide working range, and the mechanical 16-speed and feed control makes it suitable for maintenance work, structural work, machine construction, and general metalworking. The machine is being sold due to a restructuring of the production facility. It is offered in used condition, as shown in the photos. Inspection and, if desired, a functional test are possible by appointment in Kuurne, Belgium. The vice, clamping devices, and other accessories visible in the photos are only included if this is expressly agreed upon.

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, Equipment: documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: Hfsdpfx Asztpw Njftol - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: ready for operation (used), Year of construction: 1993, A candle filter system Faudi with precoating principle for the treatment and purification of grinding oil is available. Operating fluid: grinding oil, flow rate: 360m³/h, tank capacity: 180m³, control: Siemens. Documentation available. An on-site inspection is possible. Hodpfx Afsxnbr Iotsfl

Condition: like new (used), Year of construction: 2022, table length 1600 mm table width 1000 mm Hjdpfx Afjxcblkotjfl burner heads 1 Control RDC6445G Control System laser capacity in Watt 80 travel -x axis 1600 mm travel -y axis 1000 mm travel -z axis 300 mm weight of the machine ca. 300 t dimensions of the machine ca. 2,2 x 1,8 x 1,1 m

Condition: used, Year of construction: 1995, operating hours: 5,132 h, Press system with ACP 1500 and APEX 1600, capacity: approx. 14 t/h Hedpfew Hxrlex Aftefl Continuous operation with integrated pomace re-extraction for increased yield Compac press type: ACP 1500, belt width 1,500 mm, press length approx. 4,515 mm, width: 2,440 mm and height approx. 2,180 mm, Press belt / sieve belt Mash feed hopper, juice collection trays Pneumatic cylinder for belt tensioning, pneumatic control, piping Belt cleaning by rotating brush roller and belt scraper blade; Mash pump type: AMP 580, compact design eccentric screw pump Press system with APEX 1600 For the production of fruit juices with exceptionally high yields using integrated pomace re-extraction system Footprint: 3,500 mm x 2,500 mm, including:

Condition: excellent (used), Year of construction: 2013, FEELER VB-1650 CNC Vertical Machining Centre Control FANUC 31i-TB Year 2013 Table size 800 x 1900 mm Travels XYZ 1650 x 800 x 700 mm Spindle nose to table 145-845mm Spindle centre to column 850mm Spindle speeds to 8000 rpm Spindle taper BT 40 Spindle motor 26 kW Number of tools 30 ATC Rapid traverse X & Y 20 m/min, Z 18 m/min Weight 13000 kg Supplied wtith: Hfsdpszd Dfisfx Aftjl Part probing, BLUM tool probe, Swarf Augers, Swarf conveyor, Spindle chiller, Filtermist FX7002. Tooling Package. For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #27002 Machine Serial Number: VHE133 Cost: £39,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Multispindle lathe GILDEMEISTER GM 16-6 Hfjdjzhcp Uspfx Aftel

Condition: used, Year of construction: 2012, Control POWER CONTROL PC 20+ Panel height (mm) 60 PVC-ABS edge thickness (mm) 3 Solid edge thickness (mm) 12 Feed speed mt/min 20 Upper motorized rubberized belt Manual infeed guide Anti-adhesive group Rightening group Gluing with EVA glue Edge holder plate End trimming group with automatic inclination adjustment Staggered trimming and cornering group with two motors Linear 2-motor rounding group Edge scraper group Glue scraper group Brush group Hfedpfswwk Dusx Aftel

Condition: new, Year of construction: 2024, functionality: fully functional, travel distance X-axis: 1,650 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 24 m/min, nominal power (apparent): 30 kVA, controller manufacturer: FANUC, controller model: 0i-MF Plus 10,4", total height: 3,438 mm, total length: 4,400 mm, total width: 3,900 mm, table width: 800 mm, table length: 1,700 mm, overall weight: 13,000 kg, spindle speed (max.): 1,200 rpm, coolant supply: 30 bar, distance table center to spindle nose: 920 mm, spindle motor power: 25,000 W, spindle nose: ISO 40 (DIN 69871), number of spindles: 1, number of slots in tool magazine: 24, tool length: 300 mm, tool diameter: 80 mm, tool weight: 8,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, New vertical machining centre equipped with a FANUC 0i-MF Plus control, 10.4" display, including Manual Guide I and AICC II. Table measuring 1,700 × 800 mm with a permissible load of 2,000 kg/m². Axis travels of 1,650 mm in X, 800 mm in Y and 800 mm in Z. Table-to-spindle-nose distance from 120 to 920 mm; spindle centre to column 882 mm. Cutting feed of 1 to 15 m/min, with rapid traverse rates of 36 m/min on the X and Y axes and 24 m/min on the Z axis. Direct-drive DDS spindle with ceramic bearings, 7/24 steep taper ISO 40 to DIN 69871, 12,000 rpm and a power rating of 15 to 25 kW. All three axes run on roller-type linear guideways (PMI, Taiwan) with preloaded ball screws. Swing-arm automatic tool changer with 24 stations, accepting tools up to 80 mm in diameter, 300 mm in length and 8 kg in weight. Through-spindle internal coolant supply at 30 bar with filtration unit, oil/coolant separator, hinged-belt chip conveyor combined with two screw-type chip augers, and a rear chip flushing system with coolant gun. Fully enclosed splash guarding with interlocked front door, spindle oil chiller, heat exchanger, automatic centralised lubrication and air-conditioned electrical cabinet. Rigid tapping cycle, eight open M-functions, data server with Ethernet connection and 2 GB memory card. Three-colour signal light, dustproof electrical system, spindle air seal and levelling bolts with pads. Machine supplied without counterweight. Power supply via a 400 V / 50 Hz three-phase transformer rated at 30 kVA; compressed air requirement 6 to 8 bar. Overall dimensions 4,400 × 3,900 × 3,438 mm, extending to 5,500 mm in length with the chip conveyor fitted. Machine weight 13,000 kg. CE certified. Hfsdpfx Ajzw Ex Djftsl

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, ABB Robotics IRB 2400/16 IRC5 M2004 robot Controller: IRC5 M2004 Number of axes: 6 Max. payload: 16 kg Max. working range: 1550 mm Year of manufacture: 12/2007 Serial number: 24-54029 Scope of delivery: Robot, controller, cables, teach pendant, wiring diagrams Used item – normal signs of wear and tear. Further details, article numbers and images available upon request. Two weeks commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. Hfjdszmrggjpfx Aftjl The stated amount is net. The legally required VAT of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on-site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight and desired delivery conditions. Shipping costs to foreign countries upon request – please specify country, city and postcode. Freight costs upon request – please specify delivery address.

Condition: good (used), Year of construction: 2005, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 45 mm, clearance between the columns: 520 mm, displacement volume: 318 cm³, injection weight: 289 g, Year of manufacture: 2005 Operating hours: 80,228 h Clamping force: 160 tons Hjdpfx Afozkqf Aetsfl Distance between tie bars: 520 x 520 mm Screw diameter: 45 mm Injection volume: 318 ccm Injection weight: 289 g for PS Equipment: Krauss Maffei robot, core pull, Euromap, 3 additional injection units

Condition: excellent (used), Year of construction: 2018, Wide-belt sanding machine SCM DMC SYSTEM TM 1650 Year of manufacture: 2018 Sanding width: 1,650 mm Workpiece thickness (min.): 3 mm Vertical clearance: 170 mm Hfodpfx Afozx R Dnotsl