Used Tnl 12 for sale (47,184)

Condition: new, range L-W-H 1066 x 460 x 940 mm weight 80 kg Dodoupxu Aspfx Addela 12 St. Mobile tool trolley, scope of delivery: Top drawer dimensions 954 x 400 x 134 mm Dimensions of the left drawers 569 x 400 x 75 mm | 569x400x154mm Dimensions of the right drawers 296 x 400 x 75 mm | 296x400x233mm Diameter rolls 12.5 cm Width of rolls 3.2 cm Maximum loadable weight of the large drawer is 35 kg Maximum loadable weight of the narrow drawer is 20 kg Maximum loadable weight of the tool trolley is 350 kg

Year of construction: 1985, condition: good (used), 17 rolls, Ø 12 mm Dlsdpfxobif Eds Addsa plate width: 120 mm plate thickness: 0,1 - 2 mm

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 43168448, Electric motor for DEMAG AC hoist Type: KBH100 B 4/12, Serial No: 43168448, 1.00/0.28 kW 25/15 % ED, 1390/425 rpm., IMB14 with brake (complete set) ANR: 61607700 ASN: 00901 Djdpsu Dkyzjfx Addjla

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 0/200/06/3164, overall weight: 6,500 kg, total length: 12,600 mm, workpiece weight (max.): 5,500 kg, Softforming edge banding machine , in operation, used condition, year of manufacture 2003, Dljdpsvx Ep Njfx Addoa

Condition: used, Year of construction: 1992, x-travel 1400 mm Dlsdpfeftfczjx Addja y-travel 1200 mm z-travel 1000 mm Control ZM total power requirement 0,5 kW weight of the machine ca. 2 t dimensions of the machine ca. 2 x 1,5 x 2 m

Year of construction: 2018, condition: ready for operation (used), A Pittler PV4000 CNC large-format vertical lathe is available. Swing diameter: 3800mm, max. workpiece weight: 35000kg, turning diameter: 3800mm, travel X/Z: 2x3200mm/1000mm, rapid traverse X/Z: 32m/20m/min, feed force X/Z: 22kN. Spindle flange diameter: 1900mm, face bearing diameter: 1400mm, spindle diameter: not specified, tool positions: 25/41, max. tool diameter: 150mm, max. tool weight: 20kg, max. tool length: 400mm. Pump pressure: 70bar, filtration capacity: 150l/min, water tank volume: 1550l, air capacity: 4000m³/h, extraction nozzle diameter: 350mm. Röhm chuck KFG 3500/3/6/12, outer diameter: 3500mm, height: 500mm, jaw stroke: 55mm, compensation per jaw: +/-6mm, piston stroke: 120mm, max. operating pressure: 60bar, max. total clamping force: 200kN, max. speed: 100rpm, jaw width: 70mm, max. weight: 30000kg. Overall system dimensions X/Y/Z: approx. 11400mm/5300mm/5000mm, total weight: approx. 150000kg, control: Siemens Sinumerik 840D sl. Includes Knoll chip conveyor, Knoll KF150/1550 paper band filter, Friess type 1U oil skimmer with tank, and UAS Smog Hog SH-M20 air cleaner. Documentation available. An on-site inspection is possible. Dedpfexc Nkzex Addela

Condition: used, This listing is for the Hund Wetzlar H600/12 Microscope The unit is in full working condition and is ready for immediate use Dlsdpfxoxhfdzo Addja The Hund Wetzlar H‑600 series is a line of high-quality laboratory upright compound microscopes manufactured by Helmut Hund GmbH, a German optical instrument maker that later absorbed the traditions of Will Wetzlar—a well-respected older Wetzlar-based manufacturer These microscopes are tailored for laboratory, educational, clinical, and research use. They are known for their robust mechanical build, ergonomic design, and optical clarity—making them reliable and long-lasting instruments Key Features Across H‑600 Variants Here’s a breakdown of typical configurations and options in the H‑600 series: Feature Description Stand & Mechanics Solid cast‑iron tripod, coaxial coarse/fine focusing (fine ~2 µm), 160 × 130 mm mechanical stage, 5‑position ball‑bearing nosepiece . Optics & Contrast Methods Supports brightfield, darkfield, phase contrast, and select models include incident fluorescence illumination Tube & Eyepieces Binocular tube, typically 30° viewing angle, with wide-field eyepieces (e.g., 10×/18 or 10×/20) Objectives Plan or achromatic objectives: 10×, 20×, 40× phase, and 100× oil immersion (numerical apertures e.g., 0.65, 1.25) Illumination Integrated 12 V / 30 W halogen lamp with continuous brightness control; some models also include HBO fluorescence or LED options Accessories Often include centering keys, filter sliders, spare bulbs/fuses, dust covers, and optional filters or conversion accessories .

Condition: good (used), Machine has been filling jams, honey, sweet mincemeat into plastic catering size tubs. Was then feeding into two separate lidding lines which can be available separately. Dljdperdzbtofx Addja

Condition: used, Year of construction: 2008, operating hours: 10,407 h, load capacity: 4,000 kg, lifting height: 4,500 mm, mast type: simplex, construction height: 3,100 mm, drive type: Diesel, Sideloader ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Technical condition: good Dlodpfx Aot S I Hgoddja Heating, full cab,

Condition: used, Year of construction: 2015, workpiece length 100 mm swing diameter 80 mm number of spindles 2 Control FANUC 31i-B5 workpiece weight 2,00 kg centre height 170 mm grinding wheel diameter 100 mm grinding wheel hole diameter 32 grinding wheel width max. 20 peripheral speed max. 125 m/sec passage of steadyrest 45 - 60 mm total power requirement 75,00 kW weight of the machine ca. 25,00 t dimensions of the machine ca. 5,00 x 3,50 x H3,50 m Cam grinding machine for Cam-Pieces with FANUC 31i-B5 control; loading/unloading unit, CO2 extinguishing system; for CBN grinding wheel; Dlsdpfx Aewuuwmsddsa tailstock; steady; diamond wheel dresser mounted on the dressing spindle; Wheelhead variant 12 (two grinding spindles can be moved separately).

Year of construction: 2012, condition: like new (used), Looking for a reliable cutter suction dredger that can handle a variety of dredging projects? Our used Cutterdredger, built in 2012, might be just what you need. With a length of 12 meters and a maximum dredging depth of 10 meters, this vessel is equipped with 2 hydraulic spuds, a 12-cylinder Detroit engine with only 400 hours, and a Volvo engine type TAMD121C for the hydraulics. The Warman dredge pump 12/10 (300/250mm) ensures efficient material transport. Our Cutter suction dredger is designed to operate by using a rotating cutter head to break up sediment, mud, and other materials from the bed of waterways and bodies of water. The suction pipe then transports the material to a discharge location. This type of vessel is ideal for a range of applications, including port construction and maintenance, the creation of artificial islands and beaches, deepening navigational channels, and mineral extraction. Our Cutterdredger can be customized based on the dredging depth, working capacity, and discharge distance, with capabilities ranging from 15 meters in dredging depth and a maximum flow rate of 6000 cubic meters per hour. With its compact size and efficient performance, this cutter suction dredger is perfect for a variety of dredging projects. Djdshf Ncujpfx Addjla Don't miss your chance to own this reliable used Cutterdredger, built in 2012. Contact us today to learn more about this vessel and how it can help you complete your next dredging project.

Year of construction: 2021, condition: ready for operation (used), A Pittler CNC large-format vertical lathe is available. Swing diameter: 3000mm, max. workpiece weight: 25000kg, turning diameter: 2800mm, travel X/Y: 2x2700mm/2x1000mm, rapid traverse X/Z: 40m/24m/min, feed force X/Z: 22kN. Spindle flange diameter: 1100mm, face bearing diameter: 800mm, spindle diameter: 360mm, tool positions: 25/41, max. tool diameter: 150mm, max. tool weight: 20kg, max. tool length: 400mm. Pump pressure: 70bar, filtration capacity: 400l/min, water tank volume: 2250l, air capacity: 4000m³/h, extraction nozzle diameter: 350mm. Röhm chuck KFG 2500/3/6/12, outer diameter: 2500mm, height: 400mm, jaw stroke: 50mm, compensation per jaw: +/-6mm, piston stroke: 87.5mm, max. operating pressure: 80bar, max. total clamping force: 182kN, max. speed: 170rpm, jaw width: 70mm, max. weight: 10000kg. Overall system dimensions X/Y/Z: approx. 11400mm/5300mm/5000mm, total weight: approx. 140000kg, control: Siemens Sinumerik 840D sl. Includes Knoll chip conveyor, Knoll KF400/2250 paper band filter, Friess type 1U oil skimmer with tank, and UAS Smog Hog SH-M20 air cleaner. Documentation available. An on-site inspection is possible. Dljdpfoxc Nkusx Addsa

Condition: used, Year of construction: 2011, Preheating: 4 zones at the bottom • Heating Section: 1,650 mm • Active Cooling Section: 800 mm (2-stage from above) • Chain Pin Transport System: 5 mm pin length with center support • Transport Speed: 0.2 - 2.0 m/min (Realistic for BF products: 0.5 - 0.6 m/min) • Working Width: 50 - 500 mm • Electronic Control: For width adjustment and center support • Clearance Height: +35 mm / 25 mm • Inlet & Outlet Length: 700 mm each • Condensate Management / Process Gas Cleaning in cooling zone • Automatic Chain Lubrication • ERSAsoft and EPOS Basic Module • Inline Compatible • SMEMA Compliant • Transport Height: 940 - 965 mm Available from end of Q2 2025. Dlodpfxsv Sy Rus Addja Ask for additional information!

Condition: excellent (used), TURNING DEVICE FOR PANELS (LONGITUDINAL TO CROSS) Djdsd Siydopfx Addjla Equipment to be placed between two Double End Tenoners (or two double-side Combination machines) in a line (straight position) or before an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) To turn at 90° panels (workpieces) from longitudinal sense (lenghtwise) to cross sense (crosswise) Built-in electric and command panel Total length mm 6200 1st Table (longitudinal) with motorized rollers mm 1300 x 3200 (ca.) Motorized turning device, with double cone (1 top + 1 bottom) 2nd Table (cross) with motorized rollers mm 2500 x 3000 (ca.) Min dimensions of the panels mm 195 x 250 Max dimensions of the panels mm 1200 x 2500 Min/Max panels thickness mm 12 - 40 Total installed motor power Kw 3

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 16,878 h, load capacity: 4,000 kg, lifting height: 5,700 mm, mast type: triplex, drive type: Treibgas, Sideloader Mast type: Triplex Technical condition: good Dsdpfx Aewq Twweddola

Condition: used, Year of construction: 2014, workpiece length 100 mm Dlodpfx Aevx Uvfoddja swing diameter 80 mm number of spindles 2 Control FANUC 31i-B5 workpiece weight 2,00 kg centre height 170 mm grinding wheel diameter 100 mm grinding wheel hole diameter 32 grinding wheel width max. 20 peripheral speed max. 125 m/sec passage of steadyrest 45 - 60 mm total power requirement 75,00 kW weight of the machine ca. 25,00 t dimensions of the machine ca. 5,00 x 3,50 x H3,50 m Cam grinding machine for Cam-Pieces with FANUC 31i-B5 control; loading/unloading unit, CO2 extinguishing system; for CBN grinding wheel; tailstock; steady; diamond wheel dresser mounted on the dressing spindle; Wheelhead variant 12 (two grinding spindles can be moved separately).

Condition: used, Panel turning device used for loading and unloading panels. Working dimensions: Djdpfx Ajrzhfpeddsla * Maximum panel width: 1300 mm. * Maximum panel length: 3200 mm. * Rotation system: double cone. * Direction of rotation: from transverse to longitudinal This device is commonly used in the wood and furniture industry to facilitate the movement of panels during processing. If you have any further questions or need further details, please don't hesitate to ask!

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) 5 axis (DRIVE 5C +) Gantry-drive (axe X) machine Numerical Control Control (PC85) Software woodWOP Safety cabin (enclosure) of the working head Working table with pods and rails Mod. K-Table Support rails (No.) 10 Table dimensions (mm) 1250 Clamps for workpieces fixing - Pneumatic Kit powerClamp-clamping element - K Table Automatic Tools Changing System Tools storage plate (No. of folds-positions) 14 Max. useful working area (X - Y - Z) mm 6175 x max mm 1550 x mm 300 N° 2 Working areas - Vacuum pump (capacity m3/h) 2 x 100 Separate electric and command cabinet Dledpfenzhwhsx Addoa Motorized carpet to evacuate chips and wastes. Total installed power (50 A) WORKING GROUPS (TOP): N° 9 Independent vertical boring spindles (High Speed 7500) N° 4 Independent horizontal boring spindles (No.2 in X-axe + No. 2 in Y-axe) Drilling head motor-power (Kw) 1,5 N° 1 Vertical electro-spindles HSKF63 DRIVE 5C +. Vertical electro-spindles motor power (KW 10)

Condition: used, functionality: fully functional, Year of construction: 1998, operating hours: 8,935 h, load capacity: 4,000 kg, lifting height: 4,500 mm, fuel type: diesel, mast type: simplex, construction height: 3,100 mm, drive type: Diesel, Sideloader Mast type: Standard Dodpfx Aowq Tvmeddjla Technical condition: good

Condition: used, Automatic double cell unloader without pit for use in a squaring and edge banding line Motorized panel introduction transfer Double automatic panel unloading station Suction cup system for moving the panels Panel detacher Panels can also be worked in double rows Useful width of the panel 1300 mm Useful length of the panel 3200 mm Vacuum pump Motorized transfers for the introduction of panel stacks Motorized adjustment by automatic numerical control of the horizontal suction cup support bars Martyr panel management system Programming and control system Dsdperzhftjfx Addsla

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 15,971 h, load capacity: 5,000 kg, lifting height: 5,000 mm, fuel type: electric, mast type: simplex, construction height: 3,400 mm, drive type: Elektro, Sideloader ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Technical condition: good Dlsdpjt S I Haefx Addea Heating, full cab,

Condition: used, Year of construction: 2015, operating hours: 7,673 h, load capacity: 5,000 kg, lifting height: 4,500 mm, mast type: simplex, construction height: 3,100 mm, drive type: Treibgas, Sideloader ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Dsdpfjuf Huhsx Addela Fork positioner, heating, full cab,

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 18,985 h, load capacity: 7,000 kg, lifting height: 4,500 mm, fuel type: diesel, mast type: simplex, construction height: 3,320 mm, drive type: Diesel, Sideloader ISO class: ISO class 3 = 2,500 - 4,999 kg Dlsdpfou T T A Iox Addea Mast type: Standard Condition: Ready for use and fully functional Technical condition: Good Description: Pantograph Heating, full cabin,

Condition: used, Year of construction: 2016, operating hours: 8,788 h, load capacity: 5,000 kg, lifting height: 5,100 mm, free lift: 1,670 mm, mast type: triplex, construction height: 2,550 mm, drive type: Treibgas, Sideloader Dodpfxeunc I Re Addsla ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Fork positioner, heating, full cab,

Condition: used, Year of construction: 2016, operating hours: 9,686 h, load capacity: 5,000 kg, lifting height: 5,100 mm, free lift: 1,670 mm, mast type: triplex, construction height: 2,550 mm, drive type: Treibgas, Sideloader ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Dedpfx Asunc Rfoddsla Fork positioner, heating, full cab,