Used To Dispenser for sale (10,868)

Condition: excellent (used), functionality: fully functional, Dispenser/Dosing Unit made of stainless steel Gbjdoycl Iwopfx Aatet Overall dimensions: 1600 x 600 x 1900 mm Included equipment: 4 pneumatic dosing heads Height-adjustable base The dosing unit is designed for precise dispensing of products in production processes. Equipped with four pneumatic dosing heads, it enables simultaneous portioning of several product streams, significantly increasing the efficiency and repeatability of dosing operations in processing lines. The device is mounted on a height-adjustable base, facilitating adaptation to various types of workplaces and integration with other machines in packaging or filling processes. The pneumatic dispensers operate using air pressure, allowing for precise and hygienic dosing of products with different consistencies, commonly used in the food, cosmetic, or chemical industries.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, 2 x Videojet Laser Marking Systems for date/batch coding and marking with 1 x AD Oracle laser fume extraction system. Date of manufacture - 2019. The marking of the product surface is performed by the effect of intense laser radiation on the product material. The laser beam is focussed onto the product surface and heats up the topmost layer of the material, which causes a color change or a vaporization of the topmost dye layer. Gbedpfezyu Igex Aatjt Laser Marking System model – 3340 IP54 LASER MARKING SYSTEM. Laser Marking System serial numbers - V1098/498 and V1908/499. Laser Marking System electrical requirements - 100-240 V / 50-60 hz / 1 phase. Fume extraction system model - AD Oracle. Fume extraction system serial number - 50067797003. Fume extraction system electrical requirements - 115-230 V / 50-60 hz - 1 phase.

Condition: good (used), Fully automatic sheet dispenser PAL-Cut 800 The Palcut 800 cuts paper quickly and precisely into interleaves of the desired length, directly from the roll. Fully automatic cross cutter PAL-Cut 800 Sheet dispenser that cuts interleaves quickly and precisely to the desired length. The sheet dispenser is suitable for continuous operation in an automatic palletizing system and for companies with high sheet consumption. The Palcut 800 works with rolls up to 800 mm wide. Type designation: PAL-Cut 800 Length: 1853 mm Width: 1380 Height: 1739 For roll widths up to: 800 mm Pick-up height: 1,368 mm Working speed: 480 pieces/hour Power connection: 220 V, 0.18 kW Operating mode: fully automatic Weight: 370 kg Gbjdpfx Asxamyhoatjt Link PAL-Cut 800 Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Condition: excellent (used), axle configuration: 1 axle, permissible axle load (axle 1): 10,000 kg, first registration: 12/2009, loading space length: 10,620 mm, loading space width: 2,500 mm, loading space height: 2,500 mm, total length: 11,070 mm, total width: 2,600 mm, suspension: air, tire size: 275/70 R22.5, wheelbase: 6,280 mm, color: other, Year of construction: 2009, Equipment: ABS, tail-lift, = Further options and accessories = - Rear doors - Air suspension - Side door = Further Information = Axle configuration Tyre size: 275/70 R22.5 Brakes: Disc brakes Suspension: Air suspension Rear axle: Max. axle load: 10,000 kg; Steered; Tyre tread left: 30%; Tyre tread right: 30% Weights Unladen weight: 8,220 kg Payload: 13,780 kg gross vehicle weight (GVW): 22,000 kg Functionality Tail lift: Dhollandia Refrigeration unit: Diesel and electric (7,410 operating hours diesel) Maintenance APK (general technical inspection): Valid until 12/2026 Gbodpfx Aoyu Skpoatot Condition Technical condition: Very good Visual condition: Very good Damage: None Identification Registration: OK-38-YK

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 2132 5x, functionality: fully functional, operating hours: 150 h, number of slots in tool magazine: 12, total length: 3,200 mm, total width: 2,070 mm, overall weight: 10,000 kg, For sale: AES Ultra Raptor 2132 – 5-axis CNC machining center We are selling an AES Ultra Raptor 2132 CNC machining center, a top-of-the-line machine for processing wood, MDF, particleboard, compact panels, and other panel materials. Features: ✔ 5-axis machining ✔ Working area: 3000 x 2100 mm ✔ Automatic tool changer ✔ Nesting table with vacuum clamping Gbodpezzzbcefx Aatet ✔ High precision and productivity ✔ Suitable for the production of furniture, stairs, doors, kitchens, and other custom-made products The machine is in excellent condition and ready for operation. Price: €75,000 + VAT For more information, photos, or to arrange a machine inspection, please contact us.

Condition: like new (used), functionality: fully functional, Arm lifting capacity 120 kg, length 600 cm Vacuum suction cup, lifting capacity 120 kg MANUT, year 2006 Siemens pump motor power 3 kW Base length 365 cm Godpjzz N H Tsfx Aatjbt

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, power: 5.5 kW (7.48 HP), pressing force: 80 t, stroke length: 150 mm, total length: 3,180 mm, total width: 1,250 mm, total height: 2,450 mm, overall weight: 6,000 kg, Equipment: documentation/manual, Accessories: 3 x bending prism, 3 x top beam, several bending segments, backstop, stroke counter, manual night operation. Technical parameters: Rated force 800 kN, Working table length 2500 mm, Table width 160 mm, Ram speed: downward 50 mm/s, pressing 10 mm/s, upward 100 mm/s, Maximum ram stroke Z 150 mm, Distance between side frames B 2050 mm, Overhang A 250 mm, Maximum opening height H 380 mm, Parallel ram stroke accuracy 0.1/1000 mm, Working fluid pressure 24 MPa, Electric motor power: main 5.5 kW, Machine dimensions: length (with cabinet) 3180 mm, width 1250 mm, height 2450 mm, Machine weight 6000 kg. The machine can be tested in our warehouse in Přerov by arrangement. Gbjdpfx Aaszzffretjt

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 05/1995, total width: 2,500 mm, wheelbase: 7,540 mm, Year of construction: 1995, Rear axle 1: Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg Unladen weight: 11,320 kg Payload: 18,680 kg GVW: 30,000 kg Technical condition: good Optical condition: good Gbsdszv E Ayjpfx Aatot Please contact Maarten Busser or Niels Busser for further information.

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, resolution (max.): 360 dpi, paper width (min.): 290 mm, paper width (max.): 750 mm, paper height (min.): 360 mm, paper height (max.): 1,200 mm, TECHNICAL DETAILS Production Speed Production speed, UV spot coating: max. 3,123 ISO-B2 sheets/hour Production speed, Evo 75: max. 4,200 ISO-B2 sheets/hour Production speed, Evo 75: max. 2,291 ISO-B1 sheets/hour Production speed, hot foil embossing: max. 2,300 B2 sheets/hour Format and Printing Area Paper width: min. 290 mm Paper width: max. 750 mm Paper height: min. 360 mm Paper height: max. 1,200 mm Sheet format: min. 420 mm × 297 mm Sheet format: max. 750 mm × 1,200 mm Printable width: max. 540 mm or 730 mm Hot foil embossing area: max. 740 mm × 1,190 mm Gedpfx Aezrfh Isatjbt Resolution Resolution max.: 360 dpi Material Thicknesses and Basis Weights Material basis weight: min. 135 g/m² Material basis weight: max. 800 g/m² Material thickness before printing and lamination: min. 150 µm Material thickness before printing and lamination: max. 800 µm Material thickness for hot foil embossing: min. 150 µm Material thickness for hot foil embossing, standard version: max. 600 µm Material thickness for hot foil embossing, optional: max. 800 µm Foil Rolls Foil roll diameter: max. approx. 300 mm Foil roll length: 400–2,000 m Number of foil rolls that can be used simultaneously: max. 5 Foil roll width: min. 100 mm Standard core diameter: 1 inch MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 12,720 x 1,860 x 1,840 mm Weight: approx. 4,524 kg EQUIPMENT iFOIL-L module for hot foil finishing Evo-75 version for sheet formats up to 750 mm × 1,200 mm Holder for up to five foil rolls on one shaft Quick-change core for 1-inch foil rolls

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: Ventilator VRZ 1120/63/3 WSN 180, power: 55 kW (74.78 HP), Radial industrial fan with a robust, welded sheet steel construction. Operational volume flow: 9.0017 m³/s; total pressure difference: 2001 Pa; shaft power: 20.8 kW. Gbedezzaz Iopfx Aatot Low operating hours, as it was used exclusively for testing purposes. Very good condition. Very high brand quality: Zenner fan; consoles, impellers, and housing are fully welded; Küenle motor. Includes a set of vibration dampers, compensators with guide vanes on the pressure and suction sides; color: blue according to RAL 5015.

Condition: not inspected (used), DÜRR Type: DÜRR 1K adhesive application system Dürr 1K adhesive application system with drum pump, dispenser, and heated hose (approx. 5m). Technical machine description: Condition of the system The drum pump, feed hoses, dispensing unit, etc. are contaminated with old adhesive and must be cleaned or replaced. The system has approximately 20 operating hours. The machine was used in a research facility. Year of manufacture: 2017 Air inlet pressure, max. 6 bar Dimensions: Approx. 1.5 x 1 x 1.5 meters 1 Adhesive control unit DÜRR (110017040) 1 Single drum pump (110014004) Weight: approx. 300 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by phone. Gedpezgckcsfx Aatobt

Condition: new, functionality: fully functional, power: 127 kW (172.67 HP), gearing type: hydrostat, color: red, lifting height: 9,600 mm, tire size: 17,5-R25, axle configuration: 4x4, Year of construction: 2023, operating hours: 11 h, Equipment: additional headlights, air conditioning, all wheel drive, cabin, hydraulics, === KEY SPECIFICATIONS === Year: 2023 Operating hours: 11 h Condition: Unused Max. lifting capacity: 13,500 kg Max. lifting height: 9.60 m Max. reach: 5.20 m Drive: Diesel Transmission: Hydrostatic (2 forward / 2 reverse) Four-wheel drive: Yes Steering modes: 2-wheel / 4-wheel / crab steering Stabilizers: No Cabin: Enclosed (ROPS/FOPS Level 2) Heated cabin: Yes Fork length: 2,400 mm Tyres: 17.5-R25 rough terrain Engine manufacturer: Yanmar 4TN107FTT-6SMU1 Emission class: Stage V (Tier 4 Final) Weight: 19,950 kg CE certification: Yes === HIGHLIGHTS === New 2023 model with Stage V engine 13.5 t lifting capacity and 9.6 m lifting height Robust ROPS/FOPS Level 2 cabin with excellent visibility Full CE certification and documentation included === CONDITION === Unused – only 11 operating hours. Fully inspected and tested by certified professionals. Inspection available upon request. === LOCATION & PRICE === Located in Sittard, the Netherlands. Price on request (EXW / excl. VAT). === DELIVERY === Gsdjxdavdepfx Aatobt Crane loading available upon request. Transport and logistics professionally handled by the Collé Rental & Sales team. === ADDITIONAL EQUIPMENT === Attachments available from stock: hook, jib, heavy duty buckets.

Condition: good (used), Year of construction: 2015, functionality: fully functional, MOSCA underframe strapping machine - used, but in very good condition Gbsdpfx Aajx R D Utstst

Year of construction: 2012, operating hours: 50 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 120501, High-frequency generator, 70 kW, frequency range: 120 - 450 kHz, including energy controller, current controller, and bus interface. Gsdozxwx Eepfx Aatjbt Ground fault monitoring, adjustable.

Condition: used, Year of construction: 2014, Candle Filter System – Automatic, 3 Filters 2x Filter housings 30" x 3 FBFM33 Gbjdpezz Rwtjfx Aatet 1x Candle filter FBT013GNW25J 1x Sepex pump 1x Pump for injection of oenological product after filtration or reinjection of wine 1x Mounted on skid, fully equipped with fixed piping

Condition: excellent (used), Year of construction: 2021, operating hours: 14,600 h, functionality: fully functional, machine/vehicle number: 248760, clamping force: 40,000 kN, screw diameter: 70 mm, displacement volume: 1,212 cm³, injection pressure: 1,650 bar, injection weight: 1,030 g, mold height (min.): 450 mm, ejector force: 9,64,000 N, ejector stroke: 250 mm, opening stroke: 1,000 mm, plate length: 1,450 mm, plate width: 1,200 mm, plate height: 1,100 mm, installation height: 3,650 mm, total length: 7,740 mm, total width: 2,340 mm, total height: 2,300 mm, overall weight: 25,600 kg, heating capacity: 29 kW (39.43 HP), pressure: 200 bar, number of injections: 1, pump power: 56,000 W, power: 118 kW (160.44 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 213 A, Equipment: documentation/manual, The machine has few operating hours and is in very good condition, having been well-maintained. The machine comes with a Viper12 robot, which was originally supplied with it and can be seen in the accompanying photos. The robot’s control system is not integrated with the machine, so the robot can be removed and used separately, or another robot can be installed in its place. The machine has three air valves and two hydraulic valves, Euro map signals, and a signal for the dispensing unit’s rotation speed. The machine also has a strip guard, which is not included but can be arranged separately. The extruder’s heating elements are insulated with thermal insulation. Due to the guard, the machine can operate with the rear door open. It also has a water tank with 8 zones and two additional blocks with 8 outlets each. The machine has 8 zones for heating the tooling. Only PS material has been injection molded on this machine. Gbsdpfjzqbk Nox Aatjt

Condition: excellent (used), mileage: 7,695 km, power: 331 kW (450.03 HP), first registration: 10/2015, fuel type: diesel, axle configuration: 8x4, wheelbase: 5,200 mm, fuel: diesel, fuel tank capacity: 400 l, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2015, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, fog lights, navigation system, power mirror, soot filter, spoiler, trailer coupling, = Additional Options and Equipment = - Aluminum fuel tank - Power brake booster - Roof spoiler - Low noise - Speed limiter - LED lights - Air suspension - Air horn - Particulate filter - Rear view camera - Sunshade flap - Stability control - Toolbox - Power take-off (PTO) - Towing hitch = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 10,837 cc Unladen weight: 24,830 kg Transmission Transmission: I-SHIFT, automatic Axle configuration Front axle: Steering Rear axle 1: Twin tires Rear axle 2: Twin tires Rear axle 3: Lift axle; Steering Condition Technical condition: very good Visual condition: very good VOLVO FM 450 8X4 TRIDEM WITH OVERMAT MSA 22.13 EPS PRO AUTOMATIC MIXING AND PUMPING SYSTEM FOR POLYSTYRENE SCREED EURO 6 L PACKAGE 450 HP 8X4 TRIDEM DRIVELINE, LAST AXLE LIFTED AND STEERABLE AIR SUSPENSION WHEELBASE 520 CM I-SHIFT AUTOMATIC TRANSMISSION WITH ENGINE BRAKE FM CAB WITH AIR CONDITIONING, NAVIGATION, XENON, CAMERA 3 SEATS IN CABIN TRAILER COUPLING MULTIPLE TOOLBOXES ONLY 7,695 KM!!! OVERMAT MSA 22.13 EPS PRO AUTOMATIC MIXING AND PUMPING SYSTEM FOR POLYSTYRENE SCREED Polystyrene volume: 22 m3 Binder volume: 13 m3 Dosing mixer: 400 l Pumping mixer: 800 l Height: 440 cm Water tank: 1,000 l Production of lightweight subfloors with polystyrene: up to 15 m3/h Production of foam concrete: up to 25 m3/h Drive: Vehicle PTO CE Removable BDF system FOLLOW US ON INSTAGRAM, FACEBOOK, AND TIKTOK TO SEE OUR VIDEOS OF OUR TRUCKS/COMMERCIAL VEHICLES AND MACHINERY OFFERED FOR SALE. WE SPEAK GERMAN Gbodpfsxn Sr Ssx Aatst WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Condition: excellent (used), Year of construction: 2008, Technical specifications: Working length: 2550 mm Frame width: 2050 mm Pressing force: 80 tons CNC control: OPERATOR II Graphic 14” TFT color monitor Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Automatic crowning Stroke: 350 mm Overhang: 420 mm Working height: 960 mm Motor power: 9 kW Gsdpfsy D T Rwex Aatebt CE marking Dimensions (length x width x height): approx. 3400 x 2050 x 2550 mm Weight: approx. 6 tons Accessories: 1 set of tools: 1 upper tool punch: 120 mm 1 segmented die: V50, V35, V22, V16 Condition: Very good condition, little used, only approx. 5,350 operating hours The seller is not liable for typographical or data transmission errors. The machine’s appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2013, functionality: fully functional, operating hours: 334 h, power: 17.5 kW (23.79 HP), input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, total height: 1,600 mm, total length: 6,600 mm, total width: 1,250 mm, overall weight: 2,900 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, We are offering this used OTT TORNADO-TOP edge banding machine, manufactured in 2013. The machine is in very good condition and was rarely used. It was only used to process PUR adhesive for custom-made products and individual pieces of furniture. No serial production. Type: TORNADO-TOP Year of manufacture: 2013 Power supply: 3~ N+PE Frequency: 50 Hz Rated voltage: 3×400 VAC Rated current: 31 A Rated power: 17.5 kW cos φ: Gjdpfx Aaezvqcljtebt Control voltage: 24 VDC Maximum fuse rating: 35 A Cable cross-section: 5×6 mm² If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Video available at: Base machine - Dynestic 7535-R Automatic 12.7 Dynestic table For classic nesting machining with wear plate Machining length: 3700 mm Working direction: from right to left Gsdpfx Aozt Twyoatebt Machine frame in welded construction with ground and hardened prism guides for the traversing carriage, aggregate head and consoles Traversing carriage in gantry design Rack and pinion drive, helical, in X and Y direction, Ball screw spindles Z-axis for precise positioning Technical data: Machining dimensions: Max. load on nesting table X = 3700 mm Y = 2200 mm Max. travel distances X = 5295 mm Y = 2935 mm Z = 565 mm Max. clearance height DYNESTIC table Z = 250 mm from the top of the table (without wear plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and viewing window Voltage 400 V, 50/60 Hz CONTROL: Dual-core processor Operating system: Windows XP 80 GB hard drive / 1 GB RAM RJ45 network connection 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD burner) Remote maintenance Integrated network card for data transmission of control and program data. Data transmission via high-speed internet connection Requirement: High-speed internet connection to the machine. DYNESTIC table Solid, continuous machining table with grid spacing, continuous grooves in X and Y direction, Groove spacing: 50 mm with 25 meters of sealing cord for securing the wear plate 1 machining field with stop strips / stop Height: 30 mm, pneumatically lowerable 2 stop strips in Y direction and 1 stop in X direction on the right (when viewed from the front of the machine) Vacuum fields 1-circuit vacuum system Drilling unit 7881-R, 24 spindles Drive power 3.0 kW, incl. saw unit 18 vertical spindles individually selectable Arrangement in L-shape, 11+2 in X and 6 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from the mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Rotation direction: alternating clockwise / counterclockwise n(max.) 1000 - 5710 min-1, infinitely variable Mount: M 10 thread - clearance fit 11 mm without tool, without mount 6 horizontal spindles 2 twin drill spindles in X direction (distance 32 mm between 1st and 2nd horizontal drill spindle) 1 twin drill spindle in Y direction Mount: M 10 thread, clearance fit 11 mm Total drill length max. 70 mm from the mounting end without tool, without mount Pressure booster, increases the standard pressure from 6 to 8 bar 5-axis milling unit 7844, Power: 10.0 kW (S6) cardanic, C-axis rotatable +/- 360°, A-axis rotatable +/- 180° n(max.) = 0 - 24000 min-1, infinitely variable, max. power at 12000 min-1 to 24000 min-1 Liquid cooling (cooling unit included) with HSK-F 63 tool holder with right-hand thread (for right-hand cutting tools) with collet chuck with HSK shank Ceramic ball bearings (hybrid bearings) Tool weight max. 6 kg (incl. holder) Tools:

Condition: excellent (used), Year of construction: 2001, Technical specifications: Gjdpszbuc Ijfx Aatebt Working length: 2050 mm Distance between uprights: 1750 mm Press force: 85 tons Control system: DELEM DA65A Adjustable back gauge Axes: Y1/Y2; X; R; Z1/Z2 Stroke: 365 mm Overhang: 410 mm Installation height: 535 mm Power: 11 kW Hydraulic tool clamping, top and bottom: WILA system CNC-controlled crowning I-axis: pneumatic die shifting ACB angle control system CE marking Dimensions (length x width x height): approx. 2200 x 2750 x 2900 mm Weight: approx. 9.5 tons Condition: Very good condition, retrofitted in 2026 The seller is not liable for typographical or data transmission errors. The machine’s appearance, technology, and wear and tear are commensurate with its age; used machines are sold without any warranty.

Condition: excellent (used), mileage: 9,02,353 km, power: 397 kW (539.77 HP), first registration: 04/2012, tire size: 385/65, axle configuration: 6x2, gearing type: mechanical, number of gears: 16, suspension: steel-air, Year of construction: 2012, Equipment: EBS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, parking heater, power mirror, spoiler, trailer coupling, = Additional options and equipment = - Alarm system - Aluminum fuel tank - Heated mirrors - Roof spoiler - Remote central locking - High beam headlights - Low noise - Speed limiter - Air conditioning - Air suspension - Air-sprung seats Gbjdpfxsxcqhzj Aatot - Air horn - Radio/CD player - Disc brakes - Sun visor - Auxiliary heater (parking heater) - Toolbox - Towing jaw = Notes = Irma body, built in 2012 Steering axle = Further information = Transmission: Manual, 16 gears, manual gearbox Axle brand: Michelin Front axle: Tire size: 385/65; Steered; Tire tread left: 55%; Tire tread right: 55%; Suspension: Leaf suspension Rear axle 1: Tire size: 315/80; Twin tires; Differential lock; Inner left tire tread: 55%; Outer left tire tread: 55%; Inner right tire tread: 55%; Outer right tire tread: 55%; Suspension: Air suspension Rear axle 2: Tire size: 385/65; Lift axle; Steered; Tire tread left: 55%; Tire tread right: 55%; Suspension: Air suspension Body manufacturer: Volvo Technical condition: very good Cosmetic condition: very good For more information, please contact Maarten Busser or Niels Busser.

Condition: used, mileage: 6,18,325 km, power: 375 kW (509.86 HP), first registration: 11/2015, fuel type: diesel, fuel: diesel, emission class: euro6, Year of construction: 2015, Unladen weight: 11,800 kg Gbedpfey H Uwkex Aatot

Condition: used, This listing is for a Thermo Scientific Multidrop Combi Type 836 Microplate Dispenser. The unit is in full working condition and ready for immediate use. This bulk reagent dispenser delivers precise, high-speed fluid handling across various microplate formats. Ideal for high-throughput screening, it features an easy-to-use interface and ensures low dead volume to save valuable reagents. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Gjdpfx Aezgdf Ijatebt Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: used, axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 11/2004, total length: 12,000 mm, total width: 2,550 mm, suspension: air, tire size: 385/65, wheelbase: 8,000 mm, color: other, Year of construction: 2004, Equipment: ABS, = Additional options and accessories = Gsdpfozxnfcjx Aatobt - Air Suspension - Disc brakes - Lift Axle - SAF Assen = More information = Axle configuration Tyre size: 385/65 Make axles: SAF Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Weights Empty weight: 6.890 kg Carrying capacity: 23.110 kg GVW: 30.000 kg Maintenance APK (MOT): tested until 03/2027 Identification Registration number: OH-89-SN