Used To Mature for sale (80)

Year of construction: 2007, condition: good (used), RECEPTION, PROCESSING & STORAGE OF RAW MILK Bdsdpfx Aen Nx Utjddok This line consists of: 1. Blower with digital counter with touch panel; exchanger for milk cooling type APV with associated pumps and installations capacity of 10 000 l/h; 2. Two raw milk storage tanks capacity of 17 500 l and one tank capacity of 10 000 l, with associated vent pipes and installations; 3. Pasteurizer type APV with associated vent pipes and armature; 4. Separator ALFALAVAL with associated vent pipes and armature; 5. Homogenizer type APV with associated armature; 6. Standardizer type APV with capacity of 10 000 l/h and every machine has its own electrical box; 7. Automatic central industrial washing with triple chamber, with capacity of 9 000 l with associated vent pipes and armature. (The whole process is automatic and also includes truck washing, it is managed from management cabin); 8. Process tank for yoghurt production with capacity of 8 000 l with refrigerator and adjoining pumps and armature; 9. Process tanks for cream: 2 x 1 500 l and 1 x 3 000 l, with associated pumps and armature; The equipment was installed in 2007 in the same period when the whole automatic management in the company has been done. All automation is SIEMENS. Equipment is in the top state. Process of production is stopped in December 2017.

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser Bsdpfx Adjuxfu Nededk - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: used, mileage: 35,300 km, power: 96 kW (130.52 HP), first registration: 09/2021, next inspection (TÜV): 09/2024, gearing type: mechanical, suspension: other, number of seats: 5, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, onboard computer, soot filter, traction control, Roadworthy, Super, Accident-free, Demonstration vehicle, Metallic, 5-door, 1st hand, Automatic start-stop, Euro6d, green environmental sticker (4), Fabric, Breakdown kit, ISOFIX passenger seat, Fully digital instrument cluster, Distance warning, Side airbags at the front, Passenger airbag, Side airbags in the rear, Window/head airbags at the front, Window/head airbags in the rear, Height-adjustable front seats, Leather steering wheel, LED headlights, Automatic lights, Parking sensors at the rear, Parking aid, Daytime running lights, LED daytime running lights, Emergency brake assistant, Digital radio, Rain sensor, Traffic sign recognition, Digital speedometer, Hill start assist, Tire pressure monitoring, Traction control, Electronic traction system, Electric windows, Seat heating, Seat heating front seats, Telephone preparation, Hands-free system, Bluetooth hands-free system, Multifunction steering wheel, Radio, Radio/MP3, MP3 interface, USB connection, Heated outside mirrors, Automatically dimming mirror, automatically dimming interior mirror, power steering, electric exterior mirror, headrests in the rear, brake assistant, speed limiter, ISOFIX child seat holder, split rear seat, alloy wheels, roof spoiler, center armrest, lane departure warning, electric parking brake, gearbox manual transmission Technology on-board computer particle filter automatic start-stop fully digital instrument cluster assistants traffic sign recognition rain sensor light sensor emergency brake assistant hill start assist lane departure warning distance/collision warning comfort automatic climate control power steering central locking electric windows heated seats electric exterior mirrors split rear seat back cruise control park distance control multifunction steering wheel automatically dimming interior mirror center armrest leather steering wheel speed limiter visibility LED main headlights LED daytime running lights LED taillights fog lights headlight adjustment heated exterior mirrors safety ABS airbag passenger airbag side airbags ESP traction control maturity Bsdpfx Adovifdhsdodk

Condition: used, mileage: 1,69,715 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,200 kg, maximum load weight: 955 kg, first registration: 06/2020, loading space length: 1,500 mm, loading space width: 1,650 mm, loading space height: 1,400 mm, emission class: euro6, color: silver, tire size: 16 Zoll, number of seats: 5, number of previous owners: 1, Year of construction: 2020, Equipment: ABS, air conditioning, airbag, all wheel drive, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, sliding door, summer tires, traction control, trailer coupling, The vehicle is in top technical and optical condition. The vehicles for sale are checked and repaired in our master workshop. Non-smoking vehicle Equipment: First owner, ABS, ASR, electronic stabilization program (ESP) with brake assistant, 7-speed DSG, airbag driver, airbag front passenger, front passenger airbag deactivation, side airbag, all-wheel drive, 3rd brake light, electrically adjustable exterior mirrors, electric windows, headlight range control, cornering lights, radio central locking and immobilizer, electric interior lock, 2-zone air conditioning, air conditioning Climatic (semi-automatic) plus 2nd evaporator, air parking heater programmable, auxiliary heater, second evaporator, second air conditioning system, air conditioning system Climatic (semi-automatic) plus 2nd evaporator. Evaporator, programmable auxiliary heater, auxiliary heater, second heater, hands-free system, on-board computer with multifunction, height-adjustable driver's seat, manually adjustable lumbar support for left-hand front seat backrest, divisible 2nd row rear bench seat, cup holder, power steering, power windows. row, cup holder, power steering, steering wheel adjustment, electronic cruise control (GRA), second battery, rear parking aid, "Discover Media" navigation system, DAB radio, Bluetooth, maturity detection, external, Aux-In, USB Type-A, 1x USB socket, interface for external use, sliding door left and right in load/passenger compartment, heated rear window with rear wiper, Summer tires, lashing eyes in load compartment, load compartment trim, wooden load floor, rubber load floor, lashing eyes for cargo, tinted windows, dark tinted glass in rear (Venus35/Privacy), sliding window at front, rear closed in load/passenger compartment left and right, 16-inch tires, tire pressure monitoring, trailer coupling, roof fan - load compartment ventilation, EURO6, extras worth € 8.900,- Total weight: 3200kg Payload: 941kg Towing capacity: 2500kg Interior load compartment length: 1.50m Width: 1.65m Height: 1.40m We are happy to consider your wishes and can carry out various retrofitting work in our workshop: Upgrade parking heater (radio)from € 600,- Reversing camera from € 600,- 1 year Auto Helle warranty according to the warranty certificate. Last 5W30 Longlife oil service at VW with 115,956km in May 2023 New air conditioning service Current vehicle inspection Complete service booklet or digital service certificate Timing belt set and water pump, flat belt and tensioner, crankshaft oil seal, front brake discs and brake pads, rear brake discs and brake pads, air and pollen filter, automatic transmission oil change, new at 133,907km Repair - service - reconditioning costs included in the purchase price. Bank loan possible Bedpsuu Nbqsfx Addodk Subject to alterations and errors excepted.

Condition: new, Electrostatic air filter for air-handling systems - central exhaust ELBARON - RON 15 S oGk – 15.000 m³/h – 230 V – without fan Max. Air flow rate: 15,000 m³/h Total power consumption*: 3 x 0.02 kW Bdodpsh Rfccofx Addok Operating voltage*: 230 V, 50/60 Hz, 1PH + N + PE Dimensions L/W/H in mm: L 701 / W 1020 / H 1945 Colour: RAL 7035* Weight: 445 kg Manufacturer: ISI Industrieprodukte GmbH *Special voltage or special colour on request The application: The ELBARON duct air filter series were designed for central air filtration in production halls as well as for plant and building technology. Your advantages: - 15 unit variants available - Direct from the manufacturer - High filtration efficiency - Modularly expandable - Easy maintenance - Low follow-up costs due to reusable filter media - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Also available as mirror-image version - Robust construction - Quality Made in Germany Based on our filter technology, which has been tried and tested for years, this filter unit can be used as a central air filter unit in ventilation ducts. ELBARON technology reliably filters aerosols, oil mist, emulsion mist and smoke from the air. This way, the air in your production hall is cleaned effortlessly. Our air filter can also be easily integrated into central systems for machine extraction. ELBARON filter units protect downstream heat exchangers or air conditioning units from premature contamination. ELBARON filter technology is based on environmentally friendly electrostatic particle ionisation. This makes our filter units the ideal solution for large production plants due to their high separation efficiency, large capacity and easy maintenance. Take advantage of the enormous potential of ELBARON duct air filters with low maintenance costs. All our electrostatic filter cells and filter media are effortless to clean and reuse.

Condition: good (used), Schröter maturing chamber for 160 trolleys Bdjdpfxsrb A Nrj Addek

Condition: used, Year of construction: 1985, max. wheel diameter 80 mm gear width 150 mm max. module 2,5 min. module total power requirement 10 kW weight of the machine ca. 2400 kg M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 _____ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min. Milling spindle drive 3 kW Bodst Hw D Rjpfx Addjdk Total electrical load approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2.400 kg Accessories/Special Features: " Fully automatic operation cycle and minimum idle times due to programmable SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering including 30 different numeric error displays Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock, the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously. The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper. The whole process is electrically monitored and checked. The complete loading facility is encased by plexiglass. " Hydraulic work piece clamping device including collets and hydraulic ejector " separate cooling system with magnetic separator * separate hydraulic system * various change gears This machine is set up for worm gears/armature shafts that can be used for adjustable car seats, window lifters, etc.

Condition: used, Year of construction: 2006, No. 10022 Stationary single-shaft shredder Doppstadt DW 2560 E1 Used, year of construction 2006 Overhauled by Doppstadt in 2024 (new shaft / new gearbox / new bearings / etc.) Since overhaul approx. 100 operating hours Electric motor Approx. 23000 operating hours The scope of delivery includes a conveyor belt The machine was used for bulky waste and wood Filling width 1900 mm / filling length 3060 mm Motor: Manufacturer T-T Electric / type DC motor LAK 4250 C / power 315 kW / rated speed 2000 rpm / armature voltage 460 V / armature current 721 A / field voltage 340 V / field current 14.8 A / degree of protection IP 55 / cooling 2 separate motors Bdjdpfx Adswh T D Esdsk Hydraulic unit: Manufacturer OC-Hydraulik Doppstadt / power 7.5 kW / rated voltage 380 V Cutting unit: Roller / length 2500 mm / diameter 600 mm / speed 31 rpm Throughput: shredded material up to 40 t/h Longitudinal belt: length 7800 mm / width 1000 mm / discharge height 1680 mm / speed 1.8 m/s Transport dimensions approx. 8000 (7850) x 4700 (3450) x 5380 mm LWH Weight approx. 25665 kg Sale on behalf of the customer, ex location near 85456 Wartenberg, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Year of construction: 2014, Overview  This set of 6 isobaric fermentation tanks was manufactured in 2014 by the Spanish company Talleres Perman S.L.. Each tank has a capacity of 1,000 liters and is designed for fermentation and maturation under pressure, ideal for beer, cider or sparkling wine. The tanks have integrated cooling jackets and have decorative wooden cladding on the outside, which can be removed if necessary. The tanks are for sale as a planned increase in production was ultimately not realized. Available immediately. Technical details  Capacity: 6 x 1,000 liters Working pressure: up to 3 bar Diameter: approx. 125 cm Height: approx. 190 cm Base design: conical base with 30° angle Type: Isobaric fermentation and maturation tanks with cooling jacket With integrated cooling jackets With decorative wooden cladding (removable) Scope of delivery  6 x Talleres Perman DI1 | Year of construction 2014 isobaric fermentation and maturation tanks Bsdpswzb T Ujfx Addsdk

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: AP-10, type of input current: three-phase, input voltage: 380 V, total width: 7,000 mm, total length: 23,000 mm, nominal power: 20.5 kW (27.87 HP), electrical fuse: 60 A, Mašina za ispravljanje i sečenje armature – Centralni deo mašine je instalisane snage u kW u zavisnosti od modela – Uz mašinu se isporučuje odmotač nosivosti 3t. (vitlo) sa pneumatskom kočnicom – Automatski sto za odlaganje gotovog proizvoda 6 m – Tačnost mašine je ±2mm. – Mašina je automatska Bedpfswyaywex Addjdk – Brzina mašine je od 50-100m/min – Uz mašinu dolaze: dva seta čaura za ispravljanje, dva para noževa i dva para mernih valjaka. Oprema na mašini ● elektro oprema u ormanu Schneider ● svi ležajevi u mašini su FAG ili SKF

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 500/30, type of input current: three-phase, overall weight: 2,400 kg, power: 64 kW (87.02 HP), We offer a complete solution for recycling waste materials/by-products with our APM/500/30 Compact pellet line. With this, you can convert waste materials into various usable products, such as: fire pellets, feed pellets, poultry litter, manure pellets. etc. We have more than 20 years of experience in this industry. This machine is a mature technology that allows you to work quickly and efficiently, we produce all its parts ourselves and the supply of parts is continuous. We are a European Union company. We have production lines in Canada, the Netherlands, Belgium, Poland, Hungary, Slovakia, Romania. We can manufacture machines according to all relevant CE, UL, CLA standards, upon request We have resellers in Canada and Belgium For production, you can use, for example, sawdust, alfalfa, straw, sunflower seed hay, etc. The maximum moisture content of the raw material for pellet production is 15% The advertised APM 500/30 compact pellet line includes the following units and can produce 0.5 T/h pellets: 1. Hammer mill Bdsdpfx Aeht U Hxoddjk 2. Conditioner, 3. Pellet press, 4. Pellet cooler, 5. Big-bag packaging unit 6. Automatic control cabinet 7. Conveyor belts. The price is 68,000 euros We also have 1 ton/h pellet lines for 123,000 euros called APM 500/30 Compact Tandem, and the APM 500/30 Compact can also be expanded later on if needed The pellet line is ready for use within 2-3 hours after delivery! If you are interested in the equipment, write an e-mail or call us

Condition: new, "Properties: Bending radii: R10 to R200 (min. R= 1.8xD) (depending on the wall thickness, the material and the pipe diameter) Max. Bending speed: 2 rpm and 3.2 rpm without inverter Operation: NC soft-touch control panel in 8 different languages and foot pedal Number of programs: 30 per 9 bends Control: NC1 Bending direction: counterclockwise Effective length (available in different lengths as required): 1,5 / 3 / 4 / 6 m Dimensions (W x H x D): 1000 x 1500 x 3600 mm (length for 3 m version) Weight: approx. 600 kg (with 3m mandrel) NOTE: The price quoted refers to a length of 1.5 m. Other lengths available on request! Premature mandrel retraction Bjdpfxeuudrke Addedk Positioning and rotation with mechanical stops and precise digital display Pneumatic four-jaw chuck Performance: Hard copper and aluminum : 60 x 4 mm Steel tube : 60 x 3 mm Stainless steel : 60 x 2 mm Scope of delivery: Machine Standard accessories (e.g. foot switch, operating instructions, 2 hex, 4 sets of chuck jaws, bending grease, 25 mm mandrel bar) Delivery without hydraulic oil"

Condition: used, Gear motor, electric motor, electric gear motor, spur gear motor -Manufacturer: Ankerwerk Nuremberg AEG, geared motor with brake -Gear: Armature movement CAM 76 N 1 i= 33 -Speed: 43 rpm Bdedergtd Hopfx Addsk -Engine: AEG type AM 80 N4 -Power: 0.75 kW / 1400 rpm -Shaft: Ø 32 x 78 mm -Dimensions: 525/240/H275 mm -Weight: 50 kg

Condition: used, Year of construction: 2006, No. 10024 Stationary single-shaft shredder Doppstadt DW 2560 E1 Used, year of construction 2006 Overhauled by Doppstadt in 2024 (new shaft / new gearbox / new bearings / etc.) Since overhaul approx. 500 operating hours Electric motor Approx. 20000 operating hours The scope of delivery does not include a conveyor belt Filling width 1900 mm / filling length 3060 mm Motor: Manufacturer T-T Electric / type DC motor LAK 4250 C / power 315 kW / rated speed 2000 rpm / armature voltage 460 V / armature current 721 A / field voltage 340 V / field current 14.8 A / degree of protection IP 55 / cooling 2 separate motors Hydraulic unit: Manufacturer OC-Hydraulik Doppstadt / power 7.5 kW / rated voltage 380 V Cutting unit: Roller / length 2500 mm / diameter 600 mm / speed 31 rpm Throughput: shredded material up to 40 t/h Transport dimensions approx. 8000 (7850) x 4700 (3450) x 5380 mm LWH Weight approx. 25665 kg Sale on behalf of the customer, ex location near 85456 Wartenberg, without dismantling, without transport and assembly Errors in description and price excepted Bdsdpswh S I Nsfx Addjk Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Year of construction: 2019, Overview  This isobaric maturation tank was manufactured in 2019 by Spadoni. It is designed for the isobaric and isothermal maturation of beverages under pressure, with a working capacity of 1,200L (12 hL) and a total volume of 1,300L (13 hL). The tank is certified up to 3 bar (PED) and equipped with high-quality fittings and insulation. Further information on request. Technical data  Capacity: Working: 1,200 L / 12 hL Total volume: 1,300 L / 13 hL Pressure: Working pressure: 2 bar Shell: 0.49 bar Factory hydraulic test: 2 bar Certified (PED): 3 bar Material: AISI 304 stainless steel Insulation: 80 mm polyurethane foam on cylinder and bottom head, stainless steel covered Finish: Interior: 2B with polished welds Exterior: brushed grain 120 with polished welds Heads: Klopper type (top and bottom) Cooling: Cooling jacket on the cylinder Manway: Isobaric Ø400 mm, pressure-resistant up to 4 bar Connections & fittings: 2 lifting lugs Ladder support CIP tube with top spray ball and 2x butterfly valves NW40 Drain valve NW40 with cap and chain Bottom discharge valve NW40 with cap and chain Sight glass level tube (rigid acrylic, graduated in liters) Probe port (PT-100 sensor) Sampling valve Safety valve (calibrated at 3 bar) Mounting: Adjustable feet   Bdodpswkfwpefx Addok

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 1 h, VOLUMEC EasyArm 3 Three-articulated arm system including orbital attachment with clamp max. Ø 125mm - Working range: 1900 mm - Torque: max. 260Nm - Weight of the tool: 11.5 - 15 kg - Weight of the arm: 17 kg Milwaukee angle grinder NOT included in the price! Bjdpfovtaqksx Addsdk The pantograph structure maintains the balance and at the same time absorbs the restoring forces of the torque tool. The swivel arm makes it easy to reach the optimal working position. WEIGHTLESSNESS. The EasyArm series was designed to accommodate tools or other devices up to a maximum weight of 30 kg. The structure of this system, made entirely of aviation aluminum, guarantees smooth, controlled movements and correct positioning of the tool. Vibrations and torques are absorbed. The selection of different stop and clamping positions as well as various accessories results in many different processing and application options. This allows different work areas to be realized. The use of these balanced articulated arms prevents premature exhaustion of employees. Higher productivity and better working health are clear advantages here. EasyArm is a complete series of balanced articulated arms that enables a wide variety of applications.

Condition: new, The new 100F briquetting press from Holzprofi impresses with its mature, simple and solid construction. The press is designed for trade and industry. Made in EU ! Technical data: Motor output power 100% ED 11 kW Briquette diameter 70 mm Power consumption approx. 8200 W/h Capacity 90 - 120 kg/h Chip bunker 0.75 m³ Weight 810 kg weight briquettes approx. 900 - 1100 Kg/m³ Sound pressure level 68 dB Dimensions: 2220 x 1200 x 1510 mm standard equipment: With built-on oil cooler Vibration unit to prevent bridging of sawdust Automatic change of direction of rotation of the shaft Automatic switch-off Timer to start machine Bjdevrvfnepfx Addodk Special equipment on request: Carousel with 5 containers Filtering unit Modification of silo to fit filter systems of all manufacturers (eg AL-KO, Felder, Scheuch Lingo, Airmex, Nestro, Schuko, Höcker)

Condition: excellent (used), functionality: fully functional, Armature Screwdriver Powasert ADS SE 1 - Automatic screwdriving - Depth control shut-off - Automatic screw feeding - Pneumatic clamping device - Machine stand - Support roller conveyor with right support leg - Support roller conveyor with left support leg Bdedpew H Dzlsfx Addek

Condition: used, Dirt trap, flanged dirt trap, filter, coarse or fine sieve, coarse filter -Manufacturer: AW Armaturen Wolff, coarse filter corner shape Bsdoipwb Sjpfx Addjdk -Type: AW 603.0 PN 2.5 DN 300 GG25 603300 -Sieve plate mesh size: Ø 2mm material VA -Dimensions: 700/50/H533 mm -Weight: 163 kg

Condition: excellent (used), DEMAG Hub Motor 36/24 K6P for Electric Wire Rope Hoist P2000 / P1600 Available with coupling and brake disc on request Type 36/24 K6P, in very good condition Armature / Rotor / Runner, end shields, coupling, and brake also available separately Bodpfx Aov Uai Asddedk

Condition: used, Year of construction: 2012, Overview  This complete brewhouse was manufactured in 2012 and enables the production of 1,000-liter brews. The system works with steam and includes brewing, fermentation and storage tanks. It is immediately available and is currently installed and ready for operation in the production facility. The seller confirms that the system has worked perfectly until recently. The boilers have a copper coating, while the rest of the system is made of stainless steel. Details Wort yield: 1,000 liters per brew Heating system: Steam Current status: Installed and ready for operation Availability: Immediately Scope of delivery  Brewhouse | Mini Brewery System | CI T 10 | 2012 2 kettles (mash tun above the whirlpool as one unit + separate boiling kettle) Steam boiler | Mini Brewery System | - | 2012 (electric) Plate heat exchanger Hot water tank | 1,500 L Reverse osmosis system | ALFA | compact model | - Capacity: 150-200 L/h 4x Isobaric fermenter | Mini Brewery System | 1,000L | 2012 4x Horizontal isobaric maturation tank | DuoTank | 500 L | 2018 Cooling jacket & bag system for optimum beer preservation Bdedpfov Da Dlex Addek

Condition: good (used), Filtration Plant, make Seitz Orion, 100 x 100, for 180 hl/h, in 2002 overhauled, consisting of: - Kieselguhr-frame filter, with 29 kieselguhr frames in s/s, outside lying raising pipes, sight glass armatures with pressure manometer, with kieselguhr discharge tub with screw in s/s, with kieselguhr dosage unit - Sheet filter with 150 stainless steel plates, outside lying raising pipes, sight glass armatures with pressure manometer Bdjdpfxjrai N Aj Addjk - operating platform between both Filter, stairs at DE-Filter - Control cabinet

Condition: good (used), Bosch Diffusion Welding Machine The system described here was designed for the following use: Diffusion welding machine for connecting the armature wire to the commutator for the starter armature by diffusion welding. Diffusion welding machine (also known as polymer diffusion welding machine, diffusion welding, copper soft welding machine, copper strip welding machine), consisting of the main machine and control system, "PLC control, touchscreen operation". Technical specifications: Dual-stage diffusion welding machine Power data: Frequency: 50 Hz Rated power: approx. 11 kW Operating voltage: 400 V / 3P Control voltage: 24 V Rated current: 20 A Fuse: 35 A Water: Supply: 4 bar, 15-23 °C, approx. 25 l/min Compressed air, oil-free: min. 5 bar Temperature: 1000 °C at the tungsten electrodes Bodog Icfpopfx Addodk Machine dimensions without control cabinet Depth: 1800 mm Width: 3100 mm Height: 2700 mm Weight: 3000 kg Find more items - new and used - in our shop! International shipping costs upon request!

Condition: used, Year of construction: 2014, Overview  This isobaric fermentation cellar system consists of 8 isobaric fermenters with 20 HL each and is ready for immediate use. The tanks are designed for the precise fermentation and maturation of beer and were manufactured between 2014 and 2020. They can be purchased either complete or in two partial packages. Technical details  Manufacturer: SK Group & Céspedes Year of construction: 2014-2020 Capacity: 20 HL per tank Max. Pressure: 2,5 BAR Tank division: Package 1: 3 tanks from SK Group (2014) Package 2: 5 tanks from Céspedes (2016 & 2020) 2 tanks from 2020 3 tanks from 2016 Scope of delivery 8 isobaric fermenters (20 HL, 2.5 BAR, 2014-2020) Sold as a complete system or in the above-mentioned partial packages Bdsdpovx R H Tjfx Addek

Condition: excellent (used), SMT Lathe 80001350   The machine is designed and manufactured to produce rotor shafts for power tools. The machine is designed and manufactured to perform the following operations automatically. - Load/unload parts automatically from/to tool carrier line with a pick & place unit between the shaft ends. - Ring seat turning + commutator facing + commutator turning. - Ring assembly - commutator side - Ring assembly - drive wheel side The machine has several production programmes to produce different parts. Each programme corresponds uniquely to one shaft type Technical data Armature shaft length from to 92.5 - 163.1 mm  Bearing journal diameter commutator side 8; 10; 12.5 mm Drive side 12; 8 mm Min. available length bearing position 3.6 mm Package diameter 52; 55; 59 mm Ring dimensions Outer diameter 40 - 57.4 mm Inner diameter 37.4 - 56 mm Ring width 4 - 8 mm Ring seat diameter 44 - 50 mm Bdodpehw Emqjfx Addjk Surface ring seat Rz 20 mm Main dimensions and weight of the machine Machine length 2870 mm Machine width 2600 mm Machine height 2530 mm Machine weight 5000 kg Electrical installation Rated current 10 A Rated voltage (AC) 400 V Rated power 7 kVA Rated frequency 50 Hz Pneumatic installation Nominal pressure 5 bar Maximum pressure 10 bar Further articles - new and used - can be found in our shop! International shipping costs on request!