Used Tool Cabinet With Drawers for sale (40,268)

Condition: good (used), Busch SWH 125 L Pile Turner with Aeration The machine is fully operational and ready for operation. Technical specifications: Format: 1250 x 900mm Stack height: 1350mm Load capacity: 1000kg Device weight: 1000kg Tjdpfozw Tz Hex Abtob 380V power supply Control panel, fast operation, hydraulic drive. Quiet operation. Aeration Compact design, takes up little space.

Condition: used, total width: 1,900 mm, total height: 6,500 mm, diameter 1.90m Todpjzwm U Tjfx Abtjb height 6.5m on legs and agitator

Condition: used, Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT138 B/BP, used machine Manufacturer: Tool-Temp Type: TT 138 B/BP Overall dimensions: 1240 × 480 × 1400 mm (incl. castors) Weight: Approx. 180 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) with digital display (set and actual temperature) Automatic temperature monitoring Electronic flow control with digital display and automatic minimum-flow control Pressure-increasing pump Temperature measurement at the mould Pressure relief system Leak stopper and mould drainage using compressed air Automatic filling (automatic medium fill) Max. temperature range: Water: up to 160 °C Heating capacity: 24 kW — switchable in stages (6/18), automatic switching of required heating power Cooling capacity: Indirect: approx. 85 kW at 160 °C Direct: approx. 60 kW at 60 °C Pump capacity: Motor: 1.8 kW Pressure mode: max. 6.5 bar | max. 75 l/min Vacuum mode: max. 8 m H₂O Tedpfx Abszqbmdetjb Seal-less magnetic coupling drive (no mechanical seal) Connections: Medium (water): ¾" BSP female thread Cooling water inlet: 1" BSP female thread (with water filter) Cooling water outlet: 1" BSP male thread Compressed air (for mould drainage/venting): ¼" BSP female thread

Condition: used, functionality: fully functional, The TOOLTEMP company is selling TT-157e temperature control units. All units have been fitted with new filling and cooling valves. The price is per unit. Tedpfx Abjzxa Nyjtjb Medium: Water, max. 90°C Microprocessor controller MP-694 Heating power: 9 kW, manual stepped control 3/6/9 kW Cooling power: 18 kW Filling volume: 6 liters Connections: Heating circuit R1/2" internal thread; cooling water R3/8" external thread L/W/H: 600 mm x 230 mm x 600 mm Weight: 47 kg

Condition: used, Year of construction: 2021, turning diameter over bed 0800 mm turning diameter over slide rest 500 mm turning length 4000 mm spindle bore 105 mm spindle turning speed range 5,4 - 720 U/min workpiece weight 2500 kg bed width 600 mm spindle bore 105 mm longitudinal feeds: 0,05- 24,3 mm/U cross feed 0,05 - 12,15 mm/U rapid traverse 4 m/min main drive 11 kW total power requirement 14 kW weight of the machine ca. 8 t dimensions of the machine ca. 6,5 x 2,5 x 2 m Tsdpfx Asy Nd Siobtsb With 4 position tool holder, face plate with safety cover, steady rest and DRO.

Condition: used, Manufacturer: TOOL TEMP Tjdpjylaatofx Abteb

Condition: excellent (used), Year of construction: 2017, Working width: 3 meters Tedpfxjzq A Ips Abtjb Pressing force: 130 tons

Condition: excellent (used), Tool shelving unit Length 1940 mm Width 660 mm Height 1750 mm Todezrtpyjpfx Abtob 8 shelves per side

Condition: used, 26,2m3 heated tank with a connical bottom. Tedpfjun Nvbox Abteb Diameter: 3.50m Total height: 3.70m The tanks have been used to store wine.

Condition: like new (used), TOOL FOR ROAD BARRIERS LENGHT 6000mm Tjdpfxehylzro Abtsb

Condition: used, functionality: fully functional, There are several Tool-Temp controllers for sale Tjdpov E Uirsfx Abtob

Condition: used, Used temperature control unit Item number: 10636 Make Tool-Temp Tsdpfouuacfox Abtjb Up to 90°C Total height 720mm Overall length 730mm Total width 300mm

Condition: used, Tempering Unit, Liquid Tempering Unit, Industrial Tempering Unit, Thermolator, Tool-Temp TT134, Used machine Manufacturer: Tool-Temp Type: TT 134 Overall dimensions: 390 x 1030 x 1070 mm Year: 2012 Properties: Self-control system (microprocessor) Automatic drain system Temperature monitoring and indication Automatic water filling Remote and internal temperature control Automatic air vent Water and oil medium operation Tjdpfox Emd Tsx Abtob Max. Temperature: 140 °C | 18–24 kW Cooling: 50,000 kcal/h Max. pump pressure: 4 bar | 100 l/min

Condition: used, Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT168 E, used machine Manufacturer: Tool-Temp Type: TT 168 E Overall dimensions: 710 × 325 × 785 mm (incl. castors and handles) Colour: Silvergrey RAL 7001 Weight: Approx. 67 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) Digital display of set and actual values Automatic temperature monitoring Electronic flow control with digital display Automatic minimum flow control Suitable for both water and oil media Temperature range max.: Water: 90 °C Oil: 150 °C Heating capacity: Water: 12 kW / 18 kW (stages: 3/9, 9/9) Oil: 6 kW (stages: 3/3) Cooling capacity: 45 kW at 90 °C Pump capacity: Motor: 0.75 kW Pressure mode: max. 4.0 bar | max. 60 l/min Vacuum mode: max. 8 m H₂O Todpfx Abox Emfketjb Tank capacity: Min. 16 litres, max. 20 litres Connections: Medium: ½" BSP female thread Cooling water inlet: ¾" BSP female thread (with water filter) Cooling water outlet: ⅜" BSP male thread

Condition: used, Tempering Unit, Liquid Tempering Unit, Industrial Tempering Unit, Thermolator, Tool-Temp TT134, Used machine Todjy Uddpepfx Abtsb Manufacturer: Tool-Temp Type: TT 134 Overall dimensions: 390 x 1030 x 1070 mm Properties: Self-control system (microprocessor) Automatic drain system Temperature monitoring and indication Automatic water filling Remote and internal temperature control Automatic air vent Water and oil medium operation Max. Temperature: 140 °C | 18–24 kW Cooling: 50,000 kcal/h Max. pump pressure: 4 bar | 100 l/min

Condition: used, Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT168 E, used machine Manufacturer: Tool-Temp Type: TT 168 E Overall dimensions: 710 × 325 × 785 mm (incl. castors and handles) Colour: Silvergrey RAL 7001 Weight: Approx. 67 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) Digital display of set and actual values Automatic temperature monitoring Electronic flow control with digital display Automatic minimum flow control Suitable for both water and oil media Temperature range max.: Water: 90 °C Oil: 150 °C Heating capacity: Water: 12 kW / 18 kW (stages: 3/9, 9/9) Oil: 6 kW (stages: 3/3) Cooling capacity: 45 kW at 90 °C Pump capacity: Motor: 0.75 kW Pressure mode: max. 4.0 bar | max. 60 l/min Tjdpfx Aoy Uddcebtjb Vacuum mode: max. 8 m H₂O Tank capacity: Min. 16 litres, max. 20 litres Connections: Medium: ½" BSP female thread Cooling water inlet: ¾" BSP female thread (with water filter) Cooling water outlet: ⅜" BSP male thread

Condition: like new (used), Chanber size: Todpfxsd Sm Die Abteb 280x180x500mm upper 280x130x450mm lower Max temperature: 700 C °

Condition: new, Year of construction: 2012, Electric power transmission cabinet, Electrical distribution cabinet, Electrical cabinet 180.5 kW, AEG Thyristor, AEG Thyro-A, 2A 400-350 HFRL1, Thyristor converter, Power controller, Electric power transmission cabinet for furnace, Used machine Manufacturer: Amarc srl Type: 120254; 3057 Year: 2012 Dimensions: 1020 x 530 x 2130 mm Tsdpsrbzygofx Abtjb Weight: 200 kg Cabinet: 400 V; 3-phase; 50 Hz; 262 A; 180.5 kW Power transmission system AEG Thyro-A 2A 400-350 HFRL1 (Thyristor) AEG Thyro-A: Thyristor 400 V 350 A Cooled Power regulator Load supervision on analog outputs

Condition: new, Year of construction: 2026, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Tjdouzv Tzopfx Abteb Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: excellent (used), For sale, Form thermostat - Tool Temp TT-188 Max. heating temperature - 90°C Medium - water Power: 9850 Watts The device has: - vacuum pump vaccum - vacuum tank Tsdpfx Asvzb Nqobtob - function of sucking the medium out of the mold - the device can be integrated with the machine, maintenance-free

Year of construction: 2018, condition: ready for operation (used), functionality: fully functional, Tool-temp TT-137 Tool Tempering Unit, 2018, heating: 12 kW, temperature: 140°C Stock: 3 units Tjdpjzab S Hofx Abtjb

Condition: used, Log table with elevator and log scanner Rema Control Tedou Smq Sepfx Abtob - logs up to 6 m - between rails 1100/1050/ 1050/1250 mm - log table length: 10 m - Rema Scanner - log infeed conveyor

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. Tedpfxoxdmgvj Abtjb The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Year of construction: 1998, condition: excellent (used), Max. roll diameter, unwinder: 750 mm (Shaft 76) Max. roll diameter, rewinder: 320 mm Max. web width: 270 mm Description: Unwinder, splicing table, 2x web guiding system, cutting unit, rewinder, counters (meters), Nikka camera Camera Manufacturer: Nikka Research Deutschland GmbH Type: ALIS C2 Date: 2005 Description: Since May 13, 2026, the camera has only been working intermittently (outdated hardware). Although it could be repaired, the chances of success are low; the manufacturer recommends installing a new camera system. Accessories: Tjdpfjzn Ayysx Abtjb 1x Shaft rewinder 76 mm 1x Shaft rewinder 40 mm 1x Shaft rewinder 50 mm 1x Shaft rewinder 100 mm 10x Razor blades

Condition: excellent (used), Year of construction: 2009, Beam on time: approx. 17,600 hours Tedpfx Abszcvx Totob Laser on time: approx. 45,500 hours Includes Loadmaster.