Used Tool Presetter Punch for sale (37,898)

Condition: good (used), Die holder, separating tool, punching tool, punch, punch die, punch stamp, gill forming tool, die holder -Stamping tool: die holder -Hole: Ø 45 mm -Bore: Ø 33 mm -Hole spacing: 180 x Ø20 mm -Dimensions: 240/85/H120 mm -Weight: 7.3 kg Fedpfx Apjzniqxotsgg

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, die holder -Punch tool: Intermediate block -Bore: Ø 100 mm / Ø 25 mm -Dimensions: see photos -Dimensions: 205/180/H90 mm Fgodjzr Hbcepfx Aptog -Weight: 8.2 kg

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total height: 5,300 mm, ram adjustment: 150 mm, installation height: 570 mm, total width: 3,300 mm, total length: 5,250 mm, pressing force: 250 t, type of input current: three-phase, stroke length: 35 mm, input voltage: 400 V, distance between side stands: 820 mm, overall weight: 58,000 kg, control voltage: 24 V, input frequency: 50 Hz, HR 250/2200 SL – Punching Line (Demonstration and Trial System) Press frame + ram in cast design with optimal damping properties Turnkey complete system for: • Production of electrical sheet metal parts • Flat stamped parts • Flat progressive die-cut parts EQUIPMENT + ACCESSORIES: • Punching machine HR 250/2200 SL [ZEULENRODA] 2,500 kN | Stroke rate 80…250 min-¹ >also available without accessories/peripherals upon request< • Roller feed “push-pull”, [ZEHNDER & SOMMER] • RAZIOL roller strip lubricator • Strip thickness measuring device • Punching package control [UNIDOR / TRsystems] • Unwinding reel 3.0t [KOHLER] • 21-roll fine leveling machine, deburring attachment [KOHLER] • Motorized tool changing system with hydraulic lifting bars + insertion clamp • Scrap and parts removal • Servo punching shear • Control cabinet platform • Operator platform • Soundproof cabin • Safety fence TECHNICAL DESIGN: Stroke rate of the press: 80 - 250 min-¹ Ram stroke: 35 mm Quick lift: 75 mm Installed height: 570 mm at max. stroke (fixed 35 mm) at the bottom, ram adjustment (150 mm) at the top Table surface: 2300 x 1100 mm Clamping plate: 2300 x 1100 mm T-slots DIN 650: 22 mm Table opening: 2020 x 400 mm Ram surface: 2240 x 900 mm Ram stroke, fixed: 35 mm Quick lift: 75 mm Fgjdpfxezu Ryhj Aptsg Height above floor: 1380 mm (including clamping plate 200 mm) Strip inlet height: 200 - 400 mm (above the clamping plate) Stand opening, side: 820 x 500 mm (W x H) Recommended max. upper tool weight: 2200 kg Recommended upper tool weight: 1950 kg - Control system SIEMENS S7-1500 - 15’’ touch panel + two-hand control panel - Remote maintenance DESCRIPTION: - Press frame in gray cast iron design - Press ram in cast design - Direct drive with electro-pneumatic clutch-brake combination - Fully eccentric two-point eccentric shaft, forged - Power transmission via two connecting rod joints - Roller guide, 8-fold for precise ram guidance - Rotating mass balancer - Ram weight compensation by means of pneumatic bellows cylinder - Quick Lift 75 mm (quick lift function for fast tool access) - Condition monitoring (forces, temperatures, lubrication, pneumatics)

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, Fedjzniqrepfx Aptegg -Punch tool: for holding dies -Hole: Ø 100/43 mm -Dimensions: see photos -Dimensions: 345/280/H245 mm -Weight: 55.9 kg

Condition: used, Die holder, cutting tool, punching tool, punch, punching die, punching punch, gill forming tool -Punching tool: for holding matrices -Bore diameter: 50 mm -Dimensions: 200/120/H80 mm -Weight: 5.6 kg Fgjdpfx Ajcwn E Ioptog

Condition: used, Die holder, cutting tool, punching tool, punch, punching die, punching punch, gill forming tool -Punching tool: die -Punching dimensions: 15 x 25 mm square -Dimensions: 115/115/H115 mm -Weight: 3.4 kg Fgedpfocwn E Dox Aptog

Condition: used, 2 pillars punching tool, separating tool, punching tool, punch, punching die, punching punch Fodpfx Asd R A E Ajptegg -2 column punching tool -Recording: Ø 32 mm bolt -Dimensions: 270/290/H325 mm -Weight: 39 kg

Condition: used, 4-column punching tool, parting tool, punching tool, punch, punching die, punching punch -4 pillars: punching tool -Dimensions: 395/195/H240 mm Fodpfxsd Sgaao Aptogg -Weight: 54 kg

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, die holder -Punch tool: Notching tool -Type: Size 1 1/4" -Dimensions: see photos -Dimensions: 270/180/H235 mm Fgsdpfjzr Hb Asx Aptjg -Weight: 25.4 kg

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, die holder Fgjdpfx Ajzr Hcajpteg -Punch tool: Notching tool -Type: unfortunately without a type designation -Dimensions: see photos -Dimensions: 200/120/H150 mm -Weight: 13 kg

Condition: good (used), Year of construction: 2017, functionality: fully functional, X Working range max.: 2000 mm (without repositioning) Y Working range max.: 1250 mm Control: Bosch PNC-P Machine - C-frame - Coordinated guidance - Linear magazine with 15 positions for clamping jaws and tools - Hydraulic clamping jaws (2 pieces) - Drives with maintenance-free three-phase motors - Repositioning device with programmable retaining device - 1st stop pin (right, inside) - Dividing slide Punching head - Electro-hydraulic punching head - Rotatable mono-tool holder - Programmable retaining device position - Tool length compensation - Spray lubrication for punch - Punch slug extraction - Forming function Control - TRUMPF control based on Rexroth IndraMotion MTX - Operating panel with 15" TFT color screen - Integrated technology data - Teleservice interface via the internet - Automatic shutdown - Program management - Production plan Data transfer Fsdpfxezv Safe Aptegg - USB interface - RJ45 network connection Safety - CE marking - Multi-beam light barriers - Rapid shutdown of drives Extended standard equipment - Ball tables - Chip container - Initial oil filling - Additional clamping jaw - Foot switch for start - Warping detection - Vibration-damped installation - 5 RTC cassettes with die plates

Condition: used, Separating tool, punching tool, punch, punching die, punching punch, gill forming tool -Punching tool: for holding matrices -Bore diameter: 100 mm Fgsdpfx Ascwn Exepteg -Dimensions: 325/335/H115 mm -Weight: 50 kg

Condition: used, Die holder, notching tool, punching tool, punch, punching die, punching punch, -Long hole punching tool: 10.5 x 23.5 mm -Stamping dimension: see photo with dimensions -Socket: Ø 30 mm -Dimensions: 230/200/H230 mm -Weight: 18 kg Fedpfxoffphhj Aptjgg

Condition: used, 4-column punching tool, cutting tool, punching tool, punch, punching die, punching punch, -4 pillars: punching tool -Take bolt: 40 mm -Dimensions: 340/300/H235 mm -Weight: 72 kg Fodpodxnlgsfx Aptegg

Condition: used, 4-column punching tool, cutting tool, punching tool, punch, punching die, punching punch, Fedpfx Ajdxnldjptogg -Punching tool with: bending function -Take bolt: 40 mm -Dimensions: 255/205/H210 mm -Weight: 25 kg

Condition: used, Die holder, notching tool, punching tool, punch, punching die, punching punch Fgodpfofdkgyjx Aptjg -Corner notching tool: punching on both sides -Material width adjustable from: approx. 200 to 440 mm -Stamping dimension: approx. 20 x 20 mm, see photo -Take: Ø 50 mm -Dimensions: 610/245/H380 mm -Weight: 122 kg

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, gill forming tool -Manufacturer: Peddinghaus, die-cutting tool for holding dies -Type: SM078 5905 Fgedpfx Ajx Nnnbeptsg -Mounting: Hole spacing 170 mm / M16 -Dimensions: see photos -Dimensions: 200/65/H130 mm -Weight: 8.4 kg

Condition: good (used), Year of construction: 2002, functionality: fully functional, punching force: 20 t, TECHNICAL DETAILS Machine capacity: 200 kN (20 t) Air pressure: 5 bar Air flow rate: 250 Nl/min Oil capacity: 160 l Turret speed: 25 rpm Travelling ranges: Machine travel range without repositioning: 1,250 mm x 2,100 mm Processing Max. sheet thickness with ball bearing table: 6 mm Max. sheet thickness with brush table: 3 mm Max. weight per table: 100 kg Fgsdpfxjy Symuo Apteg Accuracy Punching accuracy (in standard mode): ±0.1 mm Positioning accuracy (repeatability): ±0.07 mm Performance Strokes per minute, feed 25.4 mm: X320 / Y250 Nibbling cycle, feed 1 mm: X920 / Y920 Tools Minimum programmable step: 0.01 mm Number of tools: 31 Max. tool diameter: 88.9 mm Dimensions (L x W x H): 4,890 x 4,370 x 2,137 mm Machine weight: 11,500 kg Note: No tools included, special transport required.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 55,200 h, punching force: 18 t, total height: 2,252 mm, total width: 6,203 mm, sheet thickness (max.): 6 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, controller manufacturer: BOSCH, controller model: MTX CMP70, product length (max.): 6,500 mm, number of axes: 3, This TRUMPF TruPunch 3000 CNC punching machine was manufactured in 2013. It features a working area of 2500 mm x 1250 mm and a maximum punching force of 180 kN. The machine is equipped with 18 tool stations and offers a maximum punching rate of 1000 strokes/min. If you are looking to get high-quality punching capabilities, consider the TRUMPF TruPunch 3000 machine we have for sale. Contact us for further details. • Maximum punching rate: 1000 strokes/min • Maximum marking rate: 2500 strokes/min • MultiTool change time: 0.3 sec • Tool stations: 18 • Sheet clamps: machine equipped with 3 vertically movable clamps • Maximum part size via part flap: 500 x 500 mm • Maximum part size via fixed chute: 80 x 50 mm • Control: BOSCH MTX CMP70 with 17-inch touchscreen • Tool holder: Rotating single-tool holder • Thread forming: M2.5 to M10, with thread counter and tool breakage monitoring • Marking/embossing function • Retractable die • Programmable stripper • Automatic tool length compensation • Punch stroke counter • Automatic punch lubrication • Vacuum slug removal Fodpfxszy Rlhj Aptjgg • Forming function • Brush table with loading/unloading support • Automatic repositioning with programmable clamps • Average power consumption (production): 5.6 kW • Average power consumption (automatic shutdown mode): 0.3 kW • CE marked • Full service history available • Machine under power and in operation; test possible Additional equipment • Independent part conveyor - not included in the sale • Tooling (e.g., RTC tool cassettes, punches/dies) - not included in the sale

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 18,000 h, control type: CNC control, actuation type: electric, controller model: AMNC-F (FANUC 180i-PB), punching force: 20 t, overall weight: 18,000 kg, Equipment: CE marking, documentation/manual, Manufacturer: Amada Model: EM 2510 NT Punching force: 20 tons (200 kN) Year of manufacture: 2007 Stroke length (X/Y): 2500 x 1270 mm (expandable for larger sheets) with repositioning Fgjdpfx Apszzrn Totjg Turret configuration: 45 stations with 4 automatically indexable stations Control system: AMNC-F (FANUC 180i-PB) Touchscreen operation Power supply: 27 KVA Equipped with brush tables The machine is in very good condition! It can be inspected in working order on site. The machine will be supplied with several tools. Information and price available upon request.

Condition: used, 2 pillars punching tool, separating tool, punching tool, punch, punching die, punching punch -Punching tool: 2 pillars -Punch: 5 pieces 20 x 2 mm, distance 20 mm Fsdpfx Apof Sa N Ustsgg -Price: per piece -Number: 3 pieces available -Dimensions: 280/140/H160 mm -Weight: 18 kg

Condition: used, 4-column punching tool, cutting tool, punching tool, punch, punching die, punching punch, -Punching tool with: bending function -Admission imensions: 300/205/H445 mm Fodpfxsdxnlfs Aptegg -Weight: 100 kg

Condition: used, 4-column punching tool, separating tool, punching tool, punch, punching die, punching stamp -Punching tool: 4 column punching tool long hole 10 x 7.5 mm Fgjdpfx Apeu I Hpmotog -Punching dimensions: see photo with dimensions -Dimensions: 800/315/H320 mm -Weight: 120 kg

Condition: used, 2 pillars punching tool, separating tool, punching tool, punch, punching die, punching punch -2 pillars: punching tool Fedpfxjd Sf U Ue Aptegg -Dimensions: 170/100/H130 mm -Weight: 5.3 kg

Condition: used, 2 column punching tool, separating tool, punching tool, punch, punching die, punching punch, -2 pillars: punching tool -Admission: M20 fine thread -Dimensions: 270/350/H335 mm Fodedxxrqjpfx Aptogg -Weight: 132 kg