Used Hole Punch for sale (5,964)

Condition: good (used), Year of construction: 1978, Punch, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, row hole punch, punching machine, punching press -Manufacturer: Mubea, hole punch type KL 100 -Printing capacity: 100 tons -Punching capacity: see photo type plate Iodpowrn U Hsfx Ab Isa -Thrust: 500 mm -Accessories: incl. see photos -Dimensions: 1460/880/H2100 mm -Weight: 2660 kg

Condition: used, Hydraulic punch, punch frame for use with JOKA punching units type HP-S Hydraulic hole punch, hydraulic press for punching brackets Year of manufacture: approx. 1995 Iodpfx Abeltrmuo Ioa Pressing force: 5 tons Throat depth: 155 mm Stroke: approx. 20 mm Punching unit width: max. 54 mm Punching unit installation height: max. 220 mm Die holder: Ø 48 mm Motor output: 1.5 kW Power supply: 230 Volt, 50 Hz - Suitable for universal use with JOKA SW 20 or SWD 20 punching units - Throat depth of punching units can be larger, can be pushed through to the rear - Stroke release via electric two-hand control - Hydraulic power pack HAWE, type HCW 4 / 2.5-B 1/400-1 - On subframe, mobile Required space (L x W x H): 1100 x 800 x 1450 mm Weight: approx. 200 kg Good condition

Condition: good (used), machine/vehicle number: 550C08, A used punching PEDDINGHAUS with large throat and large plate with attacks Cutting capacity 45 tonnes Stroke rate 40 strokes/min Projection 762mm Arbeitshöte 1110mm Isded Hxrtepfx Ab Ija

Condition: ready for operation (used), Pressure force: 10 tons Ijdpehtq Hfefx Ab Ija Projection: 110 mm Required space: 300 x 170 x 680 mm Weight: 32kg

Year of construction: 2009, condition: ready for operation (used), machine/vehicle number: 527, Offer 23035 Technical data approx: - Pressure capacity 30 T. - max. sheet thickness 10 mm - max. punching diameter 105 mm - punching capacity - e.g. steel sheet : 105 mm in 1,5 mm ; 45 mm in 5 mm - e.g. VA - sheet metal : 90 mm in 1,5 mm ; 45 mm in 4 mm - stroke 7 - 70 mm - throat 560 mm - maximum stroke rate 120 H/min - single stroke / continuous stroke - drive 400 V / 4 kW - space requirement approx. W 8000 x H 1850 x D 1700 mm - weight approx. 1900 kg - with: - stop table with stops - foot switch; - emergency stop button - punch quick change device Iodpolnkc Ujfx Ab Ija - various receptacles for punches and dies

Condition: good (used), Year of construction: 1995, Technical data: - Pressure capacity 250 KN - max. sheet thickness 6 mm - max. punching diameter 90 mm - stroke 42 mm - throat 500 mm - maximum stroke rate 200 H/min - connected load 4 kW Ijdehikdaepfx Ab Iea - space requirement LxWxH 1000 x H 1750 x D 1400 mm - weight approx. 1600 kg

Condition: new, Hydraulic hole punch model PUMA 55 For punching sheet metal, flat steel and steel profiles Technical data: punching force 550 kN Max. Punching capacity Ø 40 in 10 mm Throat 500 mm Engine power 5 kW Stroke rate with 20 mm stroke 38 /min maximum stroke 60 mm Machine weight at outreach 500: 1150 kg Iedpofdgh Tjfx Ab Isa Optional accessories available, please ask for price. Optional extras: Oversized punching unit up to 100 mm complete Base table plate for oversized punching equipment Throat 500 mm Laser positioning unit integrated in the downholder Multi-position table For Puma 55 S table size 1000 x 650 mm (see figure 2) Punching device for UNP and INP from 40-80 mm Special die for this Linear rail 2000 mm, complete with 8 tilt stops, Linear punching table with fence ruler and 2 finger stops with console Automatic positioning table Semi Paxy with stop in 2 axes incl. control B&R Table 1000 x 400 mm with B&R control 15" Table 2000 x 400 mm with B&R control 15" (Table can be extended by the meter up to 5000mm) (Figure 3 shows 15" controller) service: Training and instruction incl. travel expenses

Condition: used, Punching tool, punching stamp, sheet metal punch with tension screw, hand punching tool, screw hole punch, sheet metal punch square -Manufacturer: RUS, square hole punch with tension screw -Size: 69 x 69 mm -Total dimensions: Ø 128 x 120 mm -Weight: 4.8 kg Iodpfst Hmi Aex Ab Iea

Year of construction: 1982, condition: good (used), machine/vehicle number: 0155282778711, OFFER 21455 Technical data: - Pressure capacity 450 KN - punches e.g. up to 25 mm Ø in steel 15 mm Isdpfxohkr Dao Ab Ioa - stroke infinitely variable 0 to 60 mm - stroke rate approx. 16 to 47 1/min - throat 760 mm - Installation height 215 mm - working height 1150 mm - Drive 400 V / 7,5 kW - Space requirement approx. W 850 x H 1850 x D 1650 mm - Weight approx. 1350 kg - with: - E. foot switch - 20 pieces div. hole punches + dies

Condition: used, Punching tool, punching stamp, sheet metal punch with tension screw, hand punching tool, screw hole punch, sheet metal punch square Ijdet Hmivspfx Ab Isa -Manufacturer: RUS, square hole punch with tension screw -Size: 90 x 90mm -Total dimensions: Ø 157 x 135 mm -Weight: 6.8 kg

Year of construction: 1998, condition: good (used), machine/vehicle number: 0159488169537, Offer 23293 Technical data: - Pressure capacity 300 KN - punches e.g. up to 30 mm Ø in steel 9 mm - or with special punching device up to 100 mm Ø in steel 2.5 mm - stroke infinitely variable 0 to 28 mm - stroke rate 26 to 36 1/min - throat 610 mm - Installation height 240 mm Iodpfx Abspuy H Dj Isa - Drive 400 V / 4 kW - Space requirement approx. W 750 x H 1650 x D 1350 mm - weight approx. 1300 kg - with: - foot switch - grain search device, - support table with foldable stops W 1100 x D 850mm - shifting distance of the stops from the center of the punch - width between Li and Re approx. 470 mm x D 510 mm

Condition: good (used), Die cutter, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, row hole punch, punching machine, punch press -Manufacturer: Mubea, punch type KL 100 with 2-axis digital display -Pressure capacity: 100 tons -Punching performance: see photo nameplate -Projection: 535 mm -Material table: 1240 x 615 mm -Travel: x= 1100 mm / y= 600 mm Iodpfx Ajik Sl Hjb Ioa -Digital display: Heidenhain 2-axis digital display -Accessories: incl. see photos -Total dimensions: 2200/2020/H2110 mm -Weight: 3145 kg

Year of construction: 1970, condition: good (used), machine/vehicle number: FF 16, Offer 22226 Isdpeit T Hyjfx Ab Ioa Technical data: - Pressure capacity 50 T - throat approx. 360 mm - installation height approx. 240 mm - drive 400 V / 7,5 kW - perforates in ST 40 e.g. up to 25 mm Ø in 16 mm - up to 20 mm Ø in 19 mm - space requirement approx. W 1000 x H 1900 x D 1000 mm - weight approx. 1800 kg

Condition: good (used), Year of construction: 1993, Offer 23481 Technical data: - Pressure capacity 30 T - max. sheet thickness 6 mm - Max. punching diameter 105 mm - stroke 42 mm Ijdpjrgptiefx Ab Ija - throat 700 mm - maximum stroke rate 200 H/min - Table dimensions W 1500 x D 1100 mm - table height 1000 mm - Drive 400 V / 4 kW - Space requirement approx. W 1600 x H 2000 x D 2200 mm - Weight approx. 3400 kg - with: - stop table with adjustable stops - Quick stamp change device - foot switch; - Emergency stop button - Various punches + dies in separate workbench

Condition: good (used), Year of construction: 1991, machine/vehicle number: 0168091277886, Offer 23294 Hydr. combined flat and profile steel shears with notching device and hole punch Iodpferll I Usx Ab Iea Technical data: - Flat steel shears - blade length 470 mm - for flat material 450 x 15 mm - or 300 x 20 mm - Profile steel shears - L-steel at 90° 140 x 13 mm - at 45° 70 x 7 mm - T-steel at 90° 70 mm - Steel bar shears - round steel 50 mm - Square steel 42 mm - Notching device - rectangular notching 52 x 90 x 12 mm - Hole punch - Punching force approx. 750 KN - Infinitely variable stroke 0 - 70 mm - punches holes in steel up to 30 mm Ø in 20 mm - throat 310 mm - Hydraulic drive 400 V / 7.5 kW - Space requirement approx. W 1600 x H 1850 x D 1400 mm - Weight approx. 2400 kg - with: - 2 E. foot pedals for two separate work stations - Turntable

Condition: good (used), Year of construction: 1991, 1 piece Hydr. hole punch MUBEA type HP 1000 / 760. Year of manufacture 1991 Punching force 100 tons With punching saddle for K 60-K260 and various tools, manually operated linear punching unit (raster rail 4 m) swiveling and digital display, carriage clamping and foot switch Dimensions L x W X H 1930 x 780 x 1980 mm Projection 760 mm Working height 1135 mm Hole 40 in 22 mm Stroke 0 - 70 strokes Iodpotv Hzvjfx Ab Iea Number of strokes at full stroke 11 strokes Drive power 8.5 kW Weight 3800 kg 3600 kg Used, ready for operation

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, punching force: 55 t, throat depth: 500 mm, sheet thickness steel (max.): 20 mm, working height: 1,000 mm, overall weight: 1,200 kg, total length: 1,300 mm, total width: 800 mm, total height: 1,800 mm, power: 5.5 kW (7.48 HP), mount diameter: 40 mm, Punching force 550 kN Max. Punching capacity Ø 40 in 10 mm throat depth 500/750 mm Motor power 5 kW Stroke rate with 20 mm stroke 38 /min Maximum stroke 60 mm Ijdpfx Asxyy Aijb Ioa Machine weight with throat depth 500: 1150 kg

Condition: like new (used), Year of construction: 2012, 🔩 Universal Steelworker / Ironworker Machine – 80 Ton Punching Capacity This robust and versatile steelworker is engineered for demanding steel fabrication applications, combining punching, shearing, notching, and profile cutting in a single, powerful unit. With 80 tons of punching force and multiple dedicated workstations, it ensures efficient and precise steel processing across a wide range of tasks. 🧰 Punching Station - Punching force: 80 tons - Max. punching capacity: 28 × 20 mm - Max. hole diameter × thickness: 57 × 10 mm - Stroke length: 55 mm - Number of strokes (20 mm stroke): 25 / min - Throat depth: 305 mm (optionally up to 625 mm) - Max. hole diameter: 57 mm (up to 160 mm with enlarged throat) - Working height: 1087 mm 📏 Flat Steel Shearing - Maximum thickness: 300 × 20 mm - Maximum width: 450 × 15 mm - Blade length: 483 mm - Working height: 890 mm 🧱 Section & Angle Cutting - At 90°: 150 × 150 × 13 mm - At 45°: 70 × 70 × 10 mm - Working height: 1155 mm 🔹 Bar Shearing - Round bar: Ø 45 mm Isdpfsxtxcbjx Ab Isa - Square bar: 45 × 45 mm - Working height: 1175 mm ✂️ Notching Station - Material thickness: 12 mm - Width: 40 mm - Rectangular notch: 40 × 90 × 12 mm - Triangular notch: 60 × 60 × 12 mm - Working height: 890 mm ⚙️ General Data - Motor power: 7.5 kW - Dimensions (W × D × H): 1760 × 710 × 1830 mm - Weight: approx. 2000 kg ✅ Key Benefits - Multiple workstations for punching, notching, and shearing - High efficiency with up to 25 strokes per minute - Heavy-duty construction for long-term durability and accuracy - Ideal for workshops, steel fabrication plants, and maintenance departments

Condition: excellent (used), functionality: fully functional, operating hours: 25,121 h, Equipment: CE marking, TRUMATIC TC 1000 R Including original software and 13 tool cassettes Very good condition: the machine has only logged 25,121 machine hours to date Punching - Bending - Tapping (M5, M6) Iedpfewbwnusx Ab Ija Punching force 165 kN Sheet thickness up to 6.4 mm Sheet length 2,070 mm Sheet width 1,250 mm Max. stroke rate 600 rpm (punching E = 1 mm)

Condition: good (used), We are offering several dies, punches, reducing sleeves, and a quick-release clamping set for Peddinghaus here. Exact details can be found in the PDF. Isdpfx Aew Tri Njb Ija

Condition: good (used), functionality: fully functional, Year of construction: 2012, For sale: 1 piece used hole punch Ijdpfxeuihvze Ab Ija Manufacturer: Geka type: Puma 110 2HI Punching force: 110t incl. documentation Dimensions see type plate Machine can be inspected in our warehouse in 09599 Freiberg.

Condition: used, Year of construction: 1979, Motorized high-performance hole punch MUBEA KL 30 Punching capacity 30 t Hole diameter, steel 45 30 in 8 mm or 20 in 12 mm Throat 210 mm Machine dimensions L x W x H approx. 800 x 600 x 1400 mm Weight 330 kg Iodpov N Hrtjfx Ab Ioa • Mechanical foot release via cable pull • Hand finder • Adjustable hold-down device Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 1991, machine/vehicle number: 0504791315452, Offer 25218 Technical data: - Pressing force: 350 kN - Punching: e.g. up to 30 mm Ø in steel at 9 mm or up to 28 mm Ø in steel at 10 mm or up to 23 mm Ø in steel at 12 mm - Stroke rate: 72 1/min Isdpfxewuqpro Ab Isa - Throat depth: 200 mm - Installation height: 293 mm - Drive: 400 V / 1.5 kW - Required space: approx. W 550 × H 1450 × D 700 mm - Weight approx.: 400 kg - Including: - stop table with adjustable stops - electric foot switch - machine base - various punches with die

Condition: good (used), We are offering several dies, punches, reducing sleeves, and a quick-release clamping set for Peddinghaus here. Isdpfx Absw Trkao Iea Exact details can be found in the PDF.

Condition: good (used), We are offering several dies, punches, reducing sleeves, and a quick-release clamping set for Peddinghaus here. Iedpfsw Trkgsx Ab Iea Exact details can be found in the PDF.