Used Torna 765 for sale (223)

Condition: used, Year of construction: 2020, Year of manufacture: 2020 Location: Passau Bsdpfx Acs Aftkzezjww

Year of construction: 2018, condition: like new (used), functionality: fully functional, TECHNICAL DETAILS Load cell: 2 pcs Xforce K Testing software: testControl II & testXpert III Load cell: Xforce K Measuring amplifier: DCSC module Documentation: available FURTHER TECHNICAL DETAILS - as per documentation, no guarantee Maximum test force Fmax: 50 kN Total height of the testing chamber: 1,534 mm Height of the lower testing chamber without attachments: 1,355 mm Height of the upper testing chamber without attachments: 1,369 mm An additional crossbeam is required for the upper testing chamber. Bedpfjzpw Hdjx Aczsww Testing chamber width: 440 mm Load frame Load frame height without uprights: 1,714 mm Load frame height with uprights: 1,829–2,694 mm Load frame width without uprights: 760 mm Load frame width with uprights: 936 mm Load frame width with uprights and machine electronics: 1,124 mm Load frame depth: 140 mm Load frame depth without uprights and with drive base: 507 mm Load frame depth with uprights: 762 mm Load frame depth with uprights and machine electronics: 765 mm Weight and footprint Weight with machine electronics, uprights and typical attachments: approx. 300 kg Net footprint: 0.01 m² Load frame footprint: 0.713 m² Average sound pressure level at maximum speed at a distance of 1 m from the front of the machine: 61 dB(A) Drive Crossbeam speed: min. 0.0005 mm/min to max. 600 mm/min Crossbeam return speed: max. 1,000 mm/min Deviation from the set drive speed: max. 0.05% of the actual value Drive path resolution: 0.317891 nm Positioning repeatability without direction reversal: ±2.0 µm Adaptive control Cycle time: 1,000 Hz Power input Power connection plug CEE 7 (Schuko) Power connection: 230 V, 1 Ph/N/PE Power consumption at full load: approx. 2.3 kVA Mains frequency: 50/60 Hz Mains-side protection of the power connection cable: 16 A Safety functions The drive is equipped with a mechanical holding brake. When switching off, when the emergency stop is activated, or in the event of a power failure, the material testing machine stops at the current position. Unintended unloading due to energy stored in the specimen is prevented.

Condition: new, functionality: fully functional, total height: 1,640 mm, total length: 1,400 mm, total width: 1,100 mm, overall weight: 267 kg, Equipment: CE marking, documentation/manual, type plate available, ISI-Flow Desk – 1000VH – 960 m³/h – 400 V Extraction table, welding and grinding table. Extraction table with a 1.1 kW fan, filter cartridge, and wooden slats, as well as a rear wall with extraction and a ceiling and side walls without insulation. The extraction table with automatic compressed air cleaning filter and integrated fan for extracting non-explosive, dry dust and gases. TECHNICAL DESCRIPTION: Extraction capacity: 960 m³/h Dust class: M Working area W/D in mm: W 892 / D 765 Working height in mm: H 690 - 924 Table load: 150 kg/m (wood, with evenly distributed load) Work surface: Wooden slats (optional steel, stainless steel, or plastic slats) Overall dimensions W/D/H in mm: W 1400* / D 1100 / H 1640 (optional L = 1500/2000 mm available) Compressed air connection: Yes, min. 5.5 - max. 6.0 bar (for filter cleaning) Fan power: 1.1 kW Operating voltage: 3 x 400 V, 50 Hz, 2-pole Noise level*: 65 db(A) without cleaning / 85 db(A) without cleaning Pipe connection: D = 250 mm Color: RAL 7042/RAL 7011 Weight: 267 kg * With fan and nozzle Application: The extraction table with a fan is used to separate dust and welding fumes from the process air. Suitable for work where vapors and dust are generated, such as welding, grinding, etc. Your advantages of the ISI-Flow Desk series: - 12 device variants available - Filtration with compressed air-cleaned filter cartridge according to dust class M - Automatic filter cleaning by pressing a button on the front - Differential pressure gauge for easy monitoring of the cleaning requirement - Integrated, energy-efficient fan 3x400V, 50 Hz, 2-pole; closed fan blades, backward-curved, self-cleaning impellers; ISO 14694 (BV3 G 6.3) balanced - Rear wall, side walls, and ceiling ensure effective extraction and holistic air flow - Height-adjustable work table - Wide range of mounting and connection accessories - Quality Made in Europe For safe, effective air flow from extraction to exhaust. The ISI Air extraction table must not be used in conjunction with ATEX zones. Bwjdpfszdty Nox Aczew The images may contain accessories.

Year of construction: 2001, condition: used, size 765 x 545 x 95 mm Bodpovimrysfx Aczsww 10 units on stock - price per unit -

Condition: new, machine/vehicle number: 20251212005, fuel type: diesel, motor manufacturer: Scania DC16 093A, General information Bwedsy Uq Etopfx Aczsw Year of manufacture: 2026 Field of application: Construction Weights Empty weight: 6.160 kg Functional Generator capacity: 715 kVA Dimensions of cargo space: 481 x 192 x 252 cm CE mark: yes Other information Fuel consumption: 105 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A473 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 975 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2026, CORMAK TORNADO 360×1000 VARIO Universal Lathe The CORMAK TORNADO 360×1000 VARIO is a professional conventional lathe designed for precision metalworking in manufacturing plants, toolrooms, and maintenance workshops. Its rigid construction, 1,000 mm distance between centers, powerful 2.4 kW motor, and Camlock D1-5 spindle mounting ensure excellent rigidity, stability, and repeatable machining performance, even during demanding cutting operations. Key Advantages of the CORMAK TORNADO 360×1000 VARIO Universal Lathe 1,000 mm distance between centers enables machining of long shafts, sleeves, and other extended workpieces. Hardened and precision-ground bed (195 mm wide) provides excellent wear resistance and effectively dampens vibrations. 52 mm spindle bore allows machining of larger-diameter bar stock without prior preparation. Camlock D1-5 spindle nose ensures fast, secure, and rigid chuck mounting. 2.4 kW motor delivers high torque at low spindle speeds and reliable performance under load. Variable spindle speed (VARIO) from 75–2,000 RPM allows precise adjustment for different materials and machining operations. Supports both metric and imperial thread cutting, increasing the machine's versatility. Accommodates 16 × 16 mm cutting tools, making it compatible with professional turning tool holders. Rigid Construction for High Machining Accuracy The lathe is built around a heavy-duty cast iron frame whose substantial weight and wide guideways effectively minimize vibration during machining. The hardened and precision-ground bed maintains its geometry even under intensive use, ensuring consistently high machining accuracy and excellent surface finish. The spindle is mounted on precision bearings and features a Camlock D1-5 spindle nose for quick chuck changes and maximum rigidity. Its 52 mm spindle bore enables machining of larger-diameter materials, expanding the machine's application range. Standard Equipment Machine stand Bwsdpoznt I Iofx Aczew 200 mm 3-jaw chuck with internal and external jaws 200 mm 4-jaw independent chuck with internal and external jaws Set of 7 turning tool holders (16 × 16 mm) Faceplate Thread dial indicator Fixed steady rest Follow rest 2-axis SINO digital readout (DRO) Chip tray and integrated tool drawers Coolant system LED work light Technical Specifications Specification Value Swing over bed 360 mm Swing over cross slide 225 mm Distance between centers 1,000 mm Bed width 195 mm Maximum tool size 16 × 16 mm Spindle bore 52 mm Spindle taper / spindle nose MT6 / Camlock D1-5 Spindle speed range 75–2,000 RPM (variable) Metric threads 20 ranges, 0.25–5 mm Imperial threads 25 ranges, 4–60 TPI Longitudinal feeds 15 ranges, 0.05–0.5 mm/rev Cross feeds 15 ranges, 0.02–0.2 mm/rev Compound slide travel 95 mm Cross slide travel 180 mm Tailstock quill diameter 32 mm Tailstock taper MT3 Tailstock quill travel 90 mm Motor power 2.4 kW Power supply 400 V Overall dimensions (L × W × H) 1,700 × 850 × 1,600 mm Weight 550 kg

Condition: used, 1,180 x 990 mm height 765 mm clamping slots width 34 mm Bwsdpfx Acehtv T Dezjw material thickness 40 mm weight approx. 1,020 kg  

Year of construction: 1973, condition: used, bore capacity in steel (diameter) 32 mm arm length 410 - 1000 mm workpiece height max. 765 mm coolant ja boring spindle diameter 38 mm diameter of quill 70 mm spindle stroke 225 mm boring spindle MK 4 mm/min spindle turning speed - stepless 70 - 2000 U/min feed range - spindle 0,04 - 0,32 mm/U column diameter 225 mm bore radius max./min max. 1130 mm table surface area 630 x 1320 mm height adjustment 500 mm base plate 1500 x 1000 mm Bwedpfxsgmu A So Aczjw T-slots 4 Stück T-slot - distance 18 mm total power requirement 2,2 kW weight of the machine ca. 1,8 t dimensions of the machine ca. m shift of supports: 590 mm without turntable and tools

Condition: used, OTT Tornado - TOP Control system - via a 15-inch color touch monitor for full automation and maximum ease of operation. CM-CombiMelt gluing system – suitable for processing EVA and PUR hot melt adhesives as well as all common cleaning granules. Joint processing unit for attaching chipboard. Automatic roll magazine. Automatic edge magazine. Bwsdpfxez Ti Dus Aczew Double-head unit with automatic pivoting 0° / 3°. Flush trimming unit – for flush trimming – 12mm. Fine milling unit RADIUS – for radius milling – profile cutter R2 – R5. Automated contour milling – for rounding corners. Pull knife unit – radius. Surface pull knife unit. Lubricant spray system – PU. Cleaning set with fine wiping device. Very stable workpiece support with roller conveyors – FRONT with scissor lift. Complete tool set included. Machine is in EXCELLENT CONDITION. Machine is from a lease return. First delivery in 2012. Available from stock in Lieboch.

Condition: good (used), mileage: 7,09,873 km, power: 375 kW (509.86 HP), first registration: 06/2021, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6d, suspension: steel-air, Equipment: AdBlue, Bluetooth, EBS, air conditioning, cruise control, electric window regulation, electronic stability program (ESP), fog lights, fridge, navigation system, parking heater, power mirror, seat heater, soot filter, spoiler, - Aluminum fuel tank - Brake booster - EPS - Low noise - Tilting hydraulics - Air horn - Particle filter - Radio/CD player - Sliding roof - Sleeper cabin - Side door - Seat heating - Auxiliary heater - Tool box Year of construction: 2020 Front axle: Steered; Suspension: Leaf spring suspension Rear axle: Suspension: Air suspension Unladen weight: 7,709 kg Payload: 11,291 kg GVW: 19,000 kg Number of seats: 2 Technical condition: good Optical condition: good Vehicle number: 101 Mercedes Benz Actros 5 / 1851 / StreamSpace / Tilting hydraulics / Auxiliary climate control / Euro6D .: W1T9634031C023922 Suspension: Leaf / Air Transmission: Automatic Climate control Refrigerator Engine brake Bsdpjz Ngbijfx Aczjww Cruise control Auxiliary heater Distance warning assistant Lane keeping assistant Emission standard EURO 6D Tilting hydraulics Special equipment: Trailer socket 15-pin 7+7-pin, Work lights, Audio system: Digital radio DAB / DAB+, Equipment package: Economy, Circuit breaker, Urea tank (AdBlue): 60 liters, Air horns (2) on the roof of the driver's cab, Driver's cab: with air suspension, Driver's cab: Shaving mirror, Suspension: Front springs 7.5 t, 2 leaves, Fire extinguisher, Gearbox 12-speed - Type: G 281-12, Urea tank (AdBlue): 75 liters, Integral rear, Fenders 3-piece, Fuel tank: 570 liters aluminum, left, Cooler box / refrigerator, Air deflector roof (lockable) and on the side, Mounting plate / saddle plate 40 mm for saddle coupling 20 t, Engine brake reinforced, Auxiliary drive MB 131-2c, Parameterizable special module, PremiumComfort mattress bottom, Frame lowering without residual pressure control, Frame overhang 1050 mm, Smoker's package, Reversing warning audible and flashing lights (warning signal outside), Saddle coupling, low maintenance, Switch for MirrorCam on the bed, Interface fleet management system, Seat cover / upholstery: Co-driver's seat velour, Seat cover / upholstery: Driver's seat velour, Seats in the driver's cab: Driver's seat comfort suspension seat, Sun visor outside, Steel rims 11.75x22.5 (on front axle), Storage compartment left under driver's cab, Storage flap outside left, Socket 12V / 15 A in the co-driver's footwell additionally, Socket 24V in the co-driver's footwell additionally, Curtain sleeper cabin, Oil cooler transmission Additional equipment: Emission standard EURO 6, Storage above the windshield with cover, Axle configuration: 4x2, Axle load front axle 7.5 t, Actros 5, Actros driver's cab L, Approach / front mirrors heated, Trailer electrical and brake connection low, Trailer socket 24V / 15-pin, Step on driver's cab left, Exhaust to the right outside, Equipment package: Powertrain 2, Exterior mirror camera MirrorCam, Battery 220 Ah, Batteries arranged side by side, Differential lock rear axle, Compressed air connection in the driver's cab, Compressed air tank steel, Compressed air unit with condensate monitoring, Compressed air unit medium, Automatic switch-on for driving lights (light sensor), Driver's cab: Driver's cab entrance fixed, Driver's cab: Interior package chrome, Driver's cab: Tilting device hydraulic, Driver's cab: L StreamSpace, 2.50 m, Floor level, Driver's cab version: StreamSpace, Driver's cab floor level, Driver's cab: Width 2.50 m, Driver's cab: Height 765 mm, Driver's cab version: L, Door extension for driver's cab, Storage flap outside right, Lifting roof electric, Bumper corners front in plastic design, Windshield tinted with band filter,...

Condition: good (used), mileage: 9,33,548 km, power: 330 kW (448.67 HP), first registration: 11/2017, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,850 mm, fuel: diesel, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: AdBlue, Bluetooth, EBS, air conditioning, cruise control, electric window regulation, electronic stability program (ESP), fog lights, fridge, navigation system, parking heater, power mirror, seat heater, soot filter, spoiler, - Aluminum fuel tank - Brake booster - EPS - Air horn - Particulate filter - Radio/CD player Bwedpfxoz H Ty Se Aczow - Sleeper cab - Side door - Seat heating - Auxiliary heater - Toolbox - Xenon headlights Year of construction: 2017 Front axle: Steered; Suspension: Leaf spring Rear axle: Suspension: Air suspension Unladen weight: 7,905 kg Payload: 11,595 kg GVW: 19,500 kg Technical condition: good Optical condition: good Reference number: 79 Vehicle number: 79 Mercedes Benz Actros 1845 Big Space / Stand-alone air conditioning / Euro6 .: WDB96340310179577 Suspension: Leaf / Air Transmission: Automatic Air conditioning Engine brake Cruise control Auxiliary heater Distance warning assistant Lane keeping assistant Emission standard EURO 6 Special equipment: Lockable storage compartment above the windshield, axle load - measuring device, front axle load 8.0 t, airbag driver side, bi-xenon headlights, headlight cleaning system, CB radio, air horn, suspension: front springs 8.0 t, 2 leaves, parking brake additionally on the front axle, info display 12.7 cm with additional display, integral rear, upper comfort berth, narrow, fuel tank: combination tank aluminum - 820 liters diesel + 90 liters urea solution (AdBlue), cooler box / refrigerator, light and rain sensor, air intake behind the cab, storage compartment outside right, air deflector roof (lockable) and side, engine brake reinforced, parameterizable special module, premium comfort mattress bottom, spare wheel, reversing warning audible (warning signal outside), interface fleet management system, drawers under the dashboard, circuit breaker, seats in the cab: armrest passenger seat, seats in the cab: driver's seat comfort suspension seat, sun visor outside, 24V socket in the passenger footwell additionally, additional thermal insulation Additional equipment: Emission standard EURO 6, axle configuration: 4x2, Actros 4, trailer socket 24V / 15-pole, work lights, audio system: radio with USB connection, exhaust to the right outside, exterior mirrors electrically adjustable and heated, differential lock rear axle, compressed air tank steel, compressed air unit medium, cab: L BigSpace, cab version: BigSpace, cab floor level, cab: mounting height 765 mm, cab: tilting device electro-hydraulic, carpet on the engine tunnel, sun protection roller side window, driver's door, cab: width 2.50 m, 12V socket additionally, compressed air connection in the cab, lift roof electrically, preparation for upper comfort berth, wide, cab: steel sprung, comfort, suspension: leaf / air, suspension: front spring support aluminum, power windows, windshield tinted, generator 100 A, transmission 12-speed - Type: G 211-12, rear axle bevel gear 440, body/superstructure: semi-trailer tractor, lower comfort berth, comfort locking system, communication interface, fender 3-part, radiator grille, power steering pump regulated, air compressor 2-stage, engine 12.8 L - 330 kW R6 Diesel (OM 471), engine compartment encapsulation, ramp mirrors, waste heat recovery, disc brakes front and rear axle, seat cover / upholstery: fabric, seats in the cab: passenger function seat, seats in the cab: driver's seat backrest foldable, voltage converter 24V / 12V 10 A, splash guard front, stabilizer front axle, storage compartment outside left, socket cab 24V, tachograph / EC control unit, door extension for...

Year of construction: 2021, condition: new, functionality: fully functional, The INNOVATEST FENIX 200AR is a robust and precise Rockwell hardness tester designed for use in manufacturing, quality assurance, goods-in inspection and testing laboratories. Thanks to its particularly rigid steel frame and the proven deadweight testing force system, the FENIX 200AR ensures reliable and reproducible measurement results, even under demanding workshop conditions. Technical data: Rockwell hardness testing in accordance with ISO 6508 and ASTM E18 Test loads: 10 kgf preload and 60 / 100 / 150 kgf main load Bwjdpfx Aobt Drpoczew Rockwell scales: HRA, HRB, HRC and other Rockwell scales Analogue precision display Maximum workpiece height: 260 mm Reach / test depth: 150 mm Machine dimensions (H × W × D): 765 × 270 × 555 mm Machine weight: approx. 122 kg Robust steel frame construction with high rigidity Low maintenance and simple operation The FENIX 200AR impresses with its durable mechanics, high measurement accuracy and economical operation. It is ideal for companies seeking a reliable Rockwell hardness tester for daily use in production and quality assurance.

Condition: used, Year of construction: 1999, turning diameter 186 mm turning length 350 mm control FANUC O/T turning speeds 4.000 U/min Bsdsz N Hxbjpfx Aczoww spindle bore 61,0 mm tool holder 12 Stück chucking diameter 170 mm total power requirement 7,5 kW weight of the machine ca. 2,4 t - FANUC - CNC control - SMB 600 bar feeder with magazine - Chip conveyor - 3-jaw lathe chuck, 170 mm - MK 4 tailstock - Various tool holders - Cooling system - Full enclosure

Year of construction: 2019, condition: ready for operation (used), A hardly used Netzsch rotary lobe pump is available. Flow rate: 30m³/h, max. pressure: 2bar, max. temperature: 80°C, design: block design, number of poles: 6, operating hours: approx. 5h. Documentation available. On-site inspection is possible. Bwedpewtg Hqjfx Aczew

Condition: used, Year of construction: 1998, Spindle speeds 6000 rpm Spindle bore 54 mm Turning length 350 mm Turning dia. 170 mm Swing over bed ways 420 mm Swing over cross slide 280 mm X/Z - 165/350 mm No. of stations in turret 12 pcs Bedpfx Ajzy Unyjczoww Control: Fanuc 21i-T Equipped with: 6 tool holders

Condition: used, mileage: 3,95,200 km, power: 355 kW (482.67 HP), first registration: 02/2022, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 02/2026, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Year of construction: 2022, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, FT XF 480 SC LD GENTIAN BLUE Electrical connection trailer 24V/15-pin cable: 15-pin EBS Antennas: AM/FM, 2x mobile radio, GNSS Automatic idle shutdown, 5 minutes 12-speed TraXon transmission 12TX2210 DD, 16.69-1.00 OBD, Euro VI Step E Auxiliary heating with waste heat pump and timer Automatic transmission with manual transmission, full version Basic immobilizer Front axle(s): 315/60R22.5 Digital tachograph, Stoneridge 1C Rear: 11.50 t, air suspension, SR1344 Halogen headlights with height adjustment Emission class Euro 6 Max. gross combination weight Drive power 50,000 kg Class 3 Traction Control (ASR) Space Cab - Driver's Cab 400 l aluminum fuel tank, height 580 mm Driven rear axle(s): 295/60R22.5 Driven rear axle with disc brakes Catwalk with step, standard LED worklight 90 l AdBlue® tank, on the left fender TraXon automated transmission, 12-speed Eco-Fuel Interior trim color: Dark Sand Left fuel tank Adaptive Cruise Control with FCW and AEBS-3 Front axle 1, 7,500 kg, load index 154 Rear axle 1, 11,500 kg, load index 145 Driver's cab, interior trim in Delta black Protective net on both berths Soft-touch steering wheel, black Rear axle ratio 2.05 Electronic Stability Control (VSC) Driver's seat armrest Lower sleeping berth without drawer Glass roof hatch, electric operation Fog lights Lane departure warning system Power windows Mechanical differential lock Brake performance monitoring LED daytime running lights Universal FMS connection Driver Performance Assistant Central locking Upper bunk Reverse alarm MX-13 engine, 355 kW/483 hp Cab badge: 480 ZF Intarder Front: 8.00 t, air suspension, 161 N Adjustable roof spoiler for Space Cab Bedpfxjwkyv Hs Aczeww Side fenders H3302 Gentian Blue Wheelbase 3.80 m/rear overhang 0.87 m Coolbox or refrigerator Automatic cab climate control Predictive cruise control Radio/USB player, two speakers Truck phone ECAS remote control with advanced features Driver's seat: Luxury Air

Condition: excellent (used), REMS TORNADO 2010 THREADING MACHINE Product description: - Reliable, highly efficient machine for threading, cutting, deburring, thread rolling, and facing - For installation work, locksmith shops, and production facilities - Robust, compact, and adaptable design suitable for construction sites and workshops - Operating principle: rotating workpiece – stationary tool - Automatic features: clamping chuck, universal threading head, lubrication, and cooling - Large work area and chip collection container - Adjustable workpiece support - Extremely powerful and fast drive, e.g., threads a 2" pipe in just 15 seconds - Gearbox is completely maintenance-free and operates in an enclosed oil bath - Two base options: - Portable version on 3 legs, with a detachable, large oil bath and chip container - T-shaped base with an integrated, larger oil bath and chip container, for placement on a table. Fixed base or mobile trolley with a storage area for workpieces, for easy transport, at an optimal working height, stable design, available as optional extra - Three high-performance motors to choose from: - High-efficiency universal motor, 1700 W, overload protection, rotational speed 53 rpm. - Capacitor motor, 2100 W, overload protection. Two rotational speeds: 52 and 26 rpm, even under full load. Very quiet operation. - Three-phase motor, 2000 W, overload protection. Two rotational speeds: 52 and 26 rpm, even under full load. Very quiet operation. - Convenient-to-use, two-stage foot switch with an emergency stop button, allowing the operator to lean fully on the machine during operation - Two automatic clamping chucks with self-centering jaws. Quickly and easily clamps and releases the workpiece - Self-tightening chucks provide maximum clamping force - Powerful, reliable pump with high flow rate - Optimal, multi-directional guidance of the threading tool through the threading head ensures precise threading in the correct location, guaranteeing clean threads and long service life for the threading dies, Bedpsz Sk Imjfx Aczeww gearbox, and motor - Only one automatic universal head for all threads, including long threads; automatically opening - with automatic thread length control for tapered threads - Fast, easy adjustment of thread size - Clear thread scale - Easy and quick replacement of threading dies thanks to their positioning in the clamping part - Reliable, durable, high-quality REMS threading dies with optimal geometry, guaranteeing very easy entry into the material, light threading, and clean threads. Made of high-strength, specially hardened steel, ensuring an exceptionally long service life. - Self-centering pipe cutter. Stable bow made of forged steel. Ergonomic, wide handle for firm pressure on the spindle - Specially hardened cutting wheel made of reliable, tough-hard tool steel ensures a long service life. - Internal deburring tool. Stable, easy-to-use deburring tool with adjustable deburring position. - Specially hardened and processed blade guarantees light deburring and exceptionally long service life - Two blades for optimal burr removal, especially for small pipe diameters.

Condition: good (used), Colchester Tornado 100 CNC Lathe - Max. turning diameter: 400 mm - Distance between centers: 500 mm - Bar capacity: 42 mm - Year of manufacture: 1995 - Weight: 2,400 kg - Turret with 12 stations Bedpfjy Einhox Aczoww - VDI 3425 / 30 tool holders Hydraulic collet and chuck

Condition: used, mileage: 2,91,406 km, power: 355 kW (482.67 HP), first registration: 02/2022, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 02/2026, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Year of construction: 2022, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, FT XF 480 SC LD GENTIAN BLUE Mechanical cab suspension Front mirrors Idle shutdown system, 5 minutes 12-speed TraXon gearbox 12TX2210 DD, 16.69-1.00 OBD, Euro VI Stage E Auxiliary heater with waste heat pump and timer Automated transmission with manual override – full version Front axle(s): 315/60R22.5 Rear: 11.50 t, air suspension, SR1344 Halogen headlights with height adjustment Emission class Euro 6 Traction control system (TCS) Space Cab - cab Aluminum fuel tank 400 l, height 580 mm Driven rear axle(s): 295/60R22.5 Drive rear axle with disc brakes Convex main mirrors Work lights, LED AdBlue® tank 90 l, on the left fender Automated transmission, TraXon, 12 gears Eco-Fuel Interior trim color: Dark Sand DAF Connect Passenger seat: Basic Fuel tank, left side Adaptive Cruise Control with FCW and AEBS-3 Front axle 1, 7.500 kg, load index 154 Rear axle 1, 11500 kg, load index 145 Soft-grip steering wheel, color black Rear axle ratio 2.05 EAS unit, right side, low deck Electronic Stability Control (ESC) Driver's seat armrest Lower bunk without drawer Glass sunroof, electric operation Fog lights Lane change warning system Power windows Pollen filter Mechanical differential lock Brake performance monitoring LED daytime running lights Driver Performance Assistant Central locking Reversing warning system MX-13 engine, 355kW/483HP, cab emblem: 480 ZF Intarder Front: 8.00 t, air suspension, 161 N Spare wheel: 295/60R22.5 Adjustable roof spoiler for Space Cab Side deflectors H3302 Gentian Blue Wheelbase 3.80 m / rear overhang 0.87 m Bjdpfo Abki Tox Aczeww Cool box or refrigerator Chassis protection bar Aluminum wheels Alcoa, brushed, 32 mm Automatic cab climate control Predictive Cruise Control Radio/USB player, two speakers Truck phone ECAS remote control with extended functions Driver's seat: Luxury Air SP,295/60R22.5 R1,295/60R22.5 F1,315/60R22.5

Condition: used, mileage: 5,04,615 km, power: 355 kW (482.67 HP), first registration: 03/2022, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 10/2025, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Year of construction: 2022, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, FT XF 480 SC LD Technically permissible GVW (chassis) max. 19,500 kg Headlights adjusted for right-hand traffic Electrical trailer connection 24V/15-pin cable: 15-pin + EBS Alternator 80 A, batteries 2x 230 Ah Maximum ambient temperature 38°C Antennas: AM/FM, 2x cellular, GNSS Mechanical cab suspension Nameplate: standard (EU) Idle shutdown, 5 minutes 12-speed TraXon gearbox 12TX2210 DD, 16.69-1.00 OBD, Euro VI Step E Auxiliary heater with waste heat pump and timer Automated transmission with manual mode – full version Front axle(s): 315/60R22.5 Kingpin diameter 2 inches Rear: 11.50 t, air suspension, SR1344 Halogen headlights with height adjustment Emissions standard Euro 6 Top air intake Maximum permissible gross train weight, traction coupling: 50,000 kg, class 3 Traction control (ASR) Bjdpfx Asxquywjczsww Space Cab – cab Aluminium fuel tank 400 l, 580 mm height Driven rear axle(s): 295/60R22.5 Driven rear axle with disc brakes Parking brake operation with test position Front underrun protection Convex main mirrors Pneumatic coupling for trailer, swivel coupling Exhaust pipe horizontal, low-mounted Superstructure connector at cab front Cold foam mattress for lower bunk Work lights, LED AdBlue® tank 90 l Automated transmission, TraXon, 12-speed Eco-Fuel Interior trim color: Dark Sand DAF Connect Passenger seat: Basic Curtains, no partition curtain Left-sided fuel tank Adaptive Cruise Control with FCW and AEBS-3 Front axle 1, 7,500 kg, load index 154 European Whole Vehicle Type Approval (WVTA) Rear axle 1, 11,500 kg, load index 145 Compressed air tanks, steel Cab interior trim Delta black Safety nets at both bunks Door trim: loosely woven fabric Soft-touch steering wheel, black Rear axle ratio 2.05 EAS unit right, low deck Electronic Stability Control (VSC) Driver's seat armrest Glass sunroof, electric operation Operation for fixed fifth wheel coupling Fog lights Lane Departure Warning System Electric windows Pollen filter Mechanical differential lock Brake performance monitoring LED daytime running lights Universal FMS connector Driver Performance Assistant Storage compartment for trailer connections CO2 display: Yes Central locking Longitudinal frame members 260/7.0 mm, with internal reinforcement front Lower front cab, cab mountings and mudguard grey Upper bunk Reversing warning system MX-13 engine, 355 kW / 483 HP; cab badge: 480 ZF Intarder Front: 8.00 t, air suspension, 161 N Horizontal battery box and spare wheel carrier on right Kingpin setting 670 mm Adjustable roof spoiler for Space Cab JOST JSK37ME, cast iron, 140 mm, D126-15t Wheelbase 3.80 m / rear overhang 0.87 m Coolbox or refrigerator Chassis protection bar Alcoa aluminium wheels, brushed, 32 mm Speed limiter set to 85 km/h Automatic cab climate control Predictive Cruise Control Radio/USB player, two speakers Truck phone ECAS remote control with extended functions Driver’s seat: Luxury Air Blind spot camera All information subject to change. Errors excepted. Vehicle may be sold prior to inquiry.

Condition: good (used), mileage: 4,28,108 km, power: 375 kW (509.86 HP), first registration: 12/2020, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6d, suspension: steel-air, Equipment: AdBlue, Bluetooth, EBS, air conditioning, cruise control, electric window regulation, electronic stability program (ESP), fog lights, fridge, navigation system, parking heater, power mirror, retarder, seat heater, soot filter, spoiler, - Aluminum fuel tank - Brake booster - Roof spoiler - EPS Bedpfx Acez S Uxnjzjww - Low noise - Intarder - Tilt hydraulics - Air horn - Particle filter - Radio/CD player - Sliding roof - Sleeper cab - Side door - Seat heating - Auxiliary heater - Toolbox Year of construction: 2021 Front axle: Steered; Tire tread left: 90%; Tire tread right: 90%; Suspension: Leaf spring suspension Rear axle: Tire tread left: 70%; Tire tread right: 70%; Suspension: Air suspension Technical condition: good Optical condition: good Vehicle number: 74 Mercedes Benz Actros 1851 / BigSpace / Retarder / Tilt hydraulics / Euro6d / 428TKM .: W1T96340310500272 (Model 2021) Suspension: Leaf / Air Transmission: Automatic Air conditioning Retarder Engine brake Cruise control Auxiliary heater Distance keeping assistant Lane keeping assistant Tilt hydraulics Emission standard EURO 6 Special equipment: Trailer socket 15-pin 7+7-pin, Work lights, Work lights rear panel cab top, Audio system: Digital radio DAB / DAB+, Air horns (2) on cab roof, Cab: with air suspension, Suspension: Front springs 7.5 t, 2 leaves, Fire extinguisher, Vehicle without MirrorCam camera system, Vehicle without cooler grille, Vehicle without aerodynamic underbody fairing, Luggage compartment rear panel top, Transmission 12-speed - Type: G 281-12, Integral back, Folding table in the partition, Fenders 3-piece, Fuel tank: 570 liters aluminum, left, Cooler box / refrigerator, Air deflectors on the side, Mounting plate / saddle plate 40 mm for saddle coupling 20 t, Engine brake reinforced, Auxiliary drive MB 131-2c, Parameterizable special module, PremiumComfort mattress bottom, Frame lowering without residual pressure control, Frame overhang 1050 mm, Smoker's package, Retarder, Reversing warning acoustic (warning signal outside), Saddle coupling: manually lubricated, Sliding/lifting roof electric (glass), Interface fleet management system, Fuse box, Seat cover / upholstery: Co-driver's seat velour, Seat cover / upholstery: Driver's seat velour, Seats in the cab: Driver's seat suspension seat comfort, Steel rims 11.75x22.5 (on front axle), Storage compartment outside left, Socket 24V in the co-driver's footwell additionally, Preparation for all-round warning light, Curtain sleeper cab, Warning device seat belts Additional equipment: Emission standard EURO 6, Storage space above the windshield with lid, Axle configuration: 4x2, Axle load front axle 7.5 t, Actros 5, Actros cab L, Approach/front mirrors heated, Trailer electrical and brake connection low, Trailer socket 24V / 15-pin, Steps on cab left, Exhaust to the right outside, Equipment package: Powertrain 2, Battery 220 Ah, Batteries arranged side by side, Differential lock rear axle, Compressed air connection in the cab, Compressed air tank steel, Compressed air unit with condensate monitoring, Compressed air unit medium, Automatic activation for driving lights (light sensor), Cab: Cab entry fixed, Cab: Interior package chrome, Cab: Tilting mechanism hydraulic, Cab: L BigSpace, 2.50 m, Floor flat, Cab variant: BigSpace, Cab floor flat, Cab: Width 2.50 m, Cab: Mounting height 765 mm, Cab variant: L, Door extension for cab, Storage box left under cab, Storage compartment outside right, Sun visor outside, Lifting roof electric,...

Condition: used, Year of construction: 2010, swing dia. 440 mm max. turning diameter 220 mm turning length 450 mm travel -x axis 200 mm control FANUC - 18i TB max. helix angle 60 ° spindle bore 64 mm tool taper VDI 30 numbers of positions in the tool changer 12 CNC Lathe | COLCHESTER - TORNADO T6MS equipped with counter spindle and chip conveyor. Bwsdpfxovzcplo Aczow The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: T6 MS | T6-MS | T 6MS | T-6MS | T-6

Condition: used, Technical details: throat: 510 mm number of strokes: 34 Hub/min height of stroke: 100 mm sheet thickness - max.: 16 mm round bar steel: Ø 60 (scheren) mm square edge steel: 60 (scheren) mm angle steel: 90°: 200x200x18 und 45°: 100x100x13 (scheren) mm flat steel: 750x20 und 400x30 (scheren) mm knife length: 765 mm total power requirement: 15 kW weight of the machine ca.: 5,1 t Bwjdpfoxcay Hox Aczjw dimension machine approx.LxWxH: 2,4 x 1,2 x 2,0 m Hydraulic flat, profile and bar steel shears with hole punch, notcher Application: Shearing - notching - punching Punching: -Hold-down device -throat 510mm -Punching force 150t -Hole size max. Ø 40x28mm -Ø max. 165mm -max. punch holder Ø 31mm, currently installed punch Ø 25mm Notching: -max. sheet thickness 16mm -max. angle steel 120mm -Cutting depth x width: 110 x 58mm -Pipe notching device Ø 60mm Accessories: various dies and various punches and small punches (see photo) *

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516353H00894, Year of construction: 2017, operating hours: 4,650 h, load capacity: 3,000 kg, lifting height: 4,440 mm, free lift: 1,380 mm, fuel type: electric, mast type: triplex, fork length: 1,200 mm, TECHNICAL DETAILS Number of wheels: 4 Lifting capacity: 3,000 kg Lifting height: 4,440 mm Free lift: 1,380 mm Bwsdpfjzxcivjx Aczsw Fork length: 1,200 mm Fork width, maximum: 1,055 mm Fork width, minimum: 250 mm MACHINE DETAILS Mast type: Triplex Drive type: Electric Battery brand: Still Battery capacity: 775 Ah Battery voltage: 80 V Battery tray length: 1,025 mm Battery tray width: 710 mm Battery tray height: 765 mm Dimensions & Weight Dimensions (L x W x H): 2,400 x 1,190 x 2,120 mm Overhead height: 2,125 mm Transport dimensions (L x W x H): 2,403 x 1,198 x 2,125 mm Transport weight: 3,956 kg Operating hours: 4,650 h EQUIPMENT Charger Side shift Documentation available CE marking

Condition: used, TECHNICAL DETAILS - Flow : 765 [m3/h] - Output : ø 150 [mm] Floor space - Dimensions (length-depth-height) : 500 x 500 x 1800 [mm] - Weight : 85 [Kg] - Support : 500 x 450 x 770 [mm] Power supply Bedpfouhb Ibjx Aczsww - Voltage : 400 [V] - Nominal current : 0.1 [A]