Used Torque 600 Nm for sale (15,606)

Condition: as good as new (ex-display), 600 kg load capacity, height-adjustable welding turntable with a plate diameter of 1000 mm. Gsdpfx Aed D D Hljp Dobu Height: min. 0.65 m, max. 1.530 m. Speed: 0.01 - 1.1 rpm. Tilting angle: up to 135°. Hand and foot remote control with speed display. Very robust.

Condition: new, Year of construction: 2024, 600 kg load capacity Welding rotary table, height-adjustable with through-hole, 100 mm Plate diameter 700 mm Height in horizontal position, min. 0.65 m, max. 1.25 m Height in tilted position, min. 0.45 m, max. 0.95 m Speed range from 0.01 - 1.3 RPM Tilting angle up to 135° Hand and foot remote control with speed indicator very robust Gbedjg Tdpgspfx Ap Deu

Condition: new, Year of construction: 2025, load capacity: 600 kg, 600 kg load capacity Welding turntable height adjustable with through hole 100 mm Godpsr Tr Axjfx Ap Debu Plate diameter 700mm Horizontal height min. 0.65m, max. 1.25m Height tilted min. 0.45m, max. 0.95m Speed from 0.01 - 1.3 rpm Tilt up to 135° Hand and foot remote control with speed display Very robust Chuck at extra charge depending on version and size

Condition: used, Machining area: - in the X direction without gluing 6000 mm - in the X direction with gluing 5000 mm - in the Y direction 1200 mm - in the Y direction with main spindle + center distance 20 mm 1300 mm max. workpiece height above - top edge of suction plate Z1 100 mm - max. workpiece thickness Z2, dependent on equipment/application Work table height: approx. 950 mm 1 main spindle with pneumatic feed stroke - drive power: 12 kW in S-1 operation - tool holder: HSK F63, taper diameter = 38 mm - tool change: automatic - change force: 11000 N - tool weight: max. 6 kg - direction of rotation: clockwise/counterclockwise, programmable - speed range: continuously variable 1500 - 24000 rpm, programmable - drive: frequency-controlled three-phase motor - spindle lubrication: single grease lubrication - spindle cooling: water cooling 1 CNC axis rotating 360 degrees 1 vertical drilling unit S21 Machine table consists of: - 6 support arms adjustable in the X direction, each with a rear and center stop, all stops controlled by the program - 6 sets of suction plates consisting of a total of - 6 suction plates 114 x 159 x 100 mm - 6 suction plates 125 x 75 x 100 mm - The support arms and suction plates can be individually positioned according to the corresponding workpiece size. Changeover area: - without pendulum machining, without gluing: X = 2 x 2900 mm Gbedpfx Aszupibsp Dou - free space in the middle: X = 200 mm - without pendulum machining, with gluing: X = 2 x 2150 mm - free space in the middle: X = 700 mm - with pendulum machining, without gluing: X = 2 x 2400 mm - free space in the middle: X = 1200 mm - with pendulum machining, with gluing: X = 2 x 1700 mm - free space in the middle: X = 1600 mm Feed drive system Rapid traverse rates: - X-axis 100 m/min - Z-axis 25 m/min Air pressure: 6 bar Tool changer magazine with 18 positions Tool coding: position-coded Tool weight: max. 6 kg Tool length: max. 150 mm Tool diameter: max. 100 mm when fully loaded max. 150 mm with free adjacent positions or nesting Central connection for extraction Mains voltage: 3/N/PE, 400/230 V, 50 Hz 1 vacuum pump 100 m3/h

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 9346, Machine in good condition Vertical saw blade diameter: 600mm Horizontal saw blade diameter: 500mm Gsdszp Rnnepfx Ap Dobu Notching width: at 90 degrees, processing of profiles up to 300mm Miter cuts up to 30 degrees Maximum profile height: 280mm Notching depth: at 90 degrees, horizontally up to 185mm Material stop can be swiveled to 30 degrees, 90 degrees, 45 degrees Motorized adjustment of the angle with digital display

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 192378-16-001, total length: 6,000 mm, total width: 2,400 mm, total height: 2,750 mm, overall weight: 6,000 kg, Equipment: type plate available, Contact Oven "Hitec", type BG 600-3600 E continuous grilling line All stainless steel with lower and upper belt: lower and upper heating Belt temperature adjustable separately Mesh length: 3,600 mm Belt width: 600 mm Electrically heated 136 kW Gbsdpfx Aewxvqpep Dsu Belt washing system Temperature range from 50 to 260°C Adjustable speed Dimensions (L x W x H): approx. 6,000 x 2,400 x 2,750 mm year: 2021 Condition: Like new

Condition: good (used), Year of construction: 2009, Manufacturer: Audion Elektro Type: AVP 600-2 Year of construction: 2009 Power 0.7kW AUDION Veggiepack is a unique semi-automatic packaging machine for round vegetables, such as lettuce, cabbage, broccoli, cauliflower etc. The product is dense polypropylene or they are wrapped in styrofoam so that no unnecessary foil is left around the product. The product is protected from damage and the round packaging underlines its appearance. Product features: Sealed at the bottom of the product Empty foil and product separately Film positioning with photocell sensor Fast warm-up time No air compressor required Adjustable packing density AVP 600 specifications Gedpfxsht Hkke Ap Dsbu The size of the machine (HxWxH): 1230x830x960mm Machine weight: 220 kg Sealing bar: heat seal Film: (perforated) CPP, OPP, polystyrene Foil thickness: approx. 15 microns Foil width: 520-600 mm Product Length: Up to 220mm Product Height: Up to 175mm Production capacity: Max. 550 / hour Voltage: 230V / 1ph / 50Hz Power consumption: 700 watts

Condition: excellent (used), Year of construction: 2008, The new powerful dry-running pumps: The ADH series is specially designed for solar developed for the demanding processes of the semiconductor and LED markets, With a suction capacity of 600-4500 m3/h. Semiconductors: High H2 pumping rate The performance of the ADH series brings the following advantages to the process: -ADL process performance: high pumping efficiency of light gases enables faster chamber emptying between process steps - Epitaxy and EUV: high pumping speed and high flow rate Tolerance meets the most demanding process specifications Adixen AD30K dry pump, high vacuum, AD 30 KL Manufacturer: Alcatel Adixen Type: AD30K.H Year of manufacture: 2008 Adixen AD100K.H Gbedpfjikq Tyex Ap Deu Manufacturer: Alcatel Adixen Type: AD100K.H Year of manufacture: 2008 Vacuum pump: Manufacturer: AERZEN Type: GM 2000 CM-C Speed: 6000 rpm Voltage: 200-460 V Frequency (mineral oil/PFPE oil): 100 c/s Maximum suction capacity: 4035 m3/h Maximum speed: 5920 rpm Engine power S 1 / S 6: 9/5.6 kW Year of manufacture: 2008 Weight: 345 kg Dry pump: Manufacturer: Adixen Type: BF ADP122 Year of manufacture: 2008 Power 1.5 kW Maximum suction capacity: 95 m3/h Maximum continuous inlet pressure: 50 mbar Maximum exhaust pressure: 1200 mbar Cooling water: 60 l/h Speed ​​(pump): 3000-3600 rpm Operating temperature of the pump: from 5 °C to 40 °C Inlet flange: DN 50 ISO-KF Exhaust flange: DN 40

Year of construction: 2002, condition: good (used), Kaut absorption dryer CR 600 Manufacturer: KAUT GmbH Type: Dryer CR600 Year of construction: 2002 Dry air volume, nominal: 600 cbm / h Dry air volume, blowing freely: 750 cbm / h Regeneration air volume: 170 cbm / h Voltage: 400V / 3N + PE / 50Hz Power consumption: 5.9 kW Párátlanítási teljesítmény 10°C/70% relative páratartalom mellett: 3.8 kg/h Párátlanítási teljesítmény 20°C-on / 60% relative páratartalom: 4.4 kg/h Párátlanítási teljesítmény 20°C/80% relative páratartalom mellett: 5.2 kg/h Available external pressure, dry air side: 220 Pa Available external pressure, regeneration air side: 150 Pa Installation and dimensions Gjdpfx Apetib R Io Djbu Process air inlet (W x H): 380mm x 257mm Regeneration air inlet (W x H): 166mm x 179mm Dimensions (H x W x D): 735mm x 1125mm x 600mm Weight: 110kg

Condition: excellent (used), Year of construction: 2019, operating hours: 4,019 h, lifting height: 7,030 mm, free lift: 2,260 mm, fuel type: electric, mast type: triplex, battery voltage: 80 V, total height: 3,010 mm, total length: 2,420 mm, total width: 1,450 mm, color: other, Equipment: seat heater, Empty weight: 6.408 kg Battery type: PzS Lifting capacity: 3.000 kg CE mark: yes Technical condition: very good Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit - 4th Hydr. circuit - Freelift - Pallet forks - Radio - Side shift - Work lamp(s) = Remarks = General Country of production: Duitsland 7.03 meter lifting height !! , Durwen fork positioner with side shift, free lift, Linde load capacity display, built-in battery charger Gbjdpsz D I E Rjfx Ap Dou

Condition: ready for operation (used), Year of construction: 1997, operating hours: 13,465 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, table load: 1,000 kg, controller model: Heidenhain iTNC 430, TECHNICAL DETAILS Travel range, X-axis: 600 mm Travel range, Y-axis: 450 mm Travel range, Z-axis: 400 mm Table load: max. 1,000 kg Tool holder: SK 40 MACHINE DETAILS Control system: Heidenhain iTNC 430 Operating voltage: 400 V Control voltage: 24 V Gbodpfx Apozwmx So Dsu Machine weight: approx. 6,000 kg Operating hours: 48,690 h Spindle hours: 13,465 h EQUIPMENT Tool holders SK 40 Documentation Heidenhain programming manual Machine vise Clamping jaws

Condition: new, Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) Power: 18,5 kW Shaft length: 550 mm Shaft diameter: 222 mm Shaft RPM: 120 rpm Number of cutting knives: 14 Granulation: 10-30 mm Capacity: up to 4 m3/h (depending on the wood) Material discharge opening: 160 mm Material: Plastics, cardboard, wood (chipboards, MDF boards, waste,...) Filling opening: 946 x 567 mm Gsdpfx Asgw Sxzop Djbu Dimensions L/W/H: 1880/1120/1670 mm Weight: approx. 1250 kg 2 years warranty or 2000 working hours Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: reconditioned (used), reinforced gray cast iron table, tiltable balanced cast iron wheels precise upper & lower blade guide Gsdsv Dg A Ujpfx Ap Dsbu Work table dimensions approx. 680 x 580 mm Cast iron wheel diameter 600 mm Max. cutting height 340 mm Max. cutting width approx. 540 mm Three-phase motor approx. 2.2 kW, 50 Hz, 400 V

Condition: new, turning diameter over bed 280 mm turning diameter over slide rest 158 mm turning length 600 mm turning speeds 45 - 2000 U/min centre height 140 mm spindle bore 26 mm tailstock quill taper MT 2 tailstock quill stroke 60 mm metric threading 0,25 - 2,5 mm Gbsdpfx Ajvu Hanjp Deu thread - inch 6 - 96 TPI connected load frequency 230 V total power requirement 0,75 kW weight of the machine ca. 0,16 t dimensions of the machine ca. 1,26 x 0,58 x 0,60 m Professional metal lathe, gearing machine - 3-jaw chuck - 4-jaw chuck - hardened bed tracks - Clamping plate - 4-way chisel holder - Feed protection - standing and rotating bezel - Splash guard - Machine light

Condition: used, This listing is for 1 Box Hamilton Microlab 600 series Accessories Gbjdpfx Aexhfbyjp Dsu The units are in full working condition and is ready for immediate use

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Paper cup 7OZ year of production 2022 ed 110 cup/min Auto lubricating Gsdpfx Apoyrz Aps Dobu Cup colector

Condition: excellent (used), Material Testing Machine / Universal Testing Machine Type: BT2-FZ1.0TN.D16.001 Base System: zwickiLine Z1.0 TN Special Torsion Multi-Axis Material Testing System 1 kN / 2 Nm Technical Data: Testing Range: Maximum axial testing force Fmax: 1 kN Configured maximum testing torque Mmax: 2 Nm Types of tests: Tensile, compressive, and torsional Axial drive / crosshead: Crosshead speed: 0.0005 to 2,000 mm/min Max. return speed: 2,000 mm/min Gbodpfx Aozwvtxep Dsu Speed deviation: max. 0.05 % Path resolution: 0.0554 µm Positioning repeatability: ±2 µm Controller: adaptive Control cycle: 1,000 Hz Testing chamber: Testing chamber height with crosshead angled upwards: 235 to 1,065 mm Testing chamber height with crosshead angled downwards: 90 to 920 mm Testing chamber depth: 105 mm Dimensions of base machine: Height of load frame without head crosshead: approx. 1,289 mm Width with machine electronics: approx. 411 mm Depth with machine electronics: approx. 622 mm Weight of base machine: approx. 76 kg Type: Torsional drive Item No.: 1023835 Maximum drive torque: 20 Nm Rotational speed: 0.01 to 20 rpm Accuracy of set drive speed: 0.05 % Control cycle: 1,000 Hz Axially permissible testing force on the torsional drive: ±5 kN Power connection torsional drive: 230 V / 1 Ph / N / PE Mains frequency: 50 / 60 Hz Power consumption under full load: approx. 2.3 kVA Torque sensor: Item No.: 069536 Rated torque: 2 Nm Limit torque: 150 % of the rated torque Accuracy class 1 from: 0.008 Nm Accuracy class 0.5 from: 0.02 Nm Protection class: IP65 Force sensor: Type: Zwick / Roell Xforce HP Item No.: 069531 Rated force: 1 kN / 225 lbf Max. operating force: 150 % of Fnom Accuracy class 1 from: 2 N Accuracy class 0.5 from: 10 N Protection class: IP54 Measurement and control electronics: Zwick / Roell testControl II Measurement value acquisition rate: 400 kHz Measurement value transfer to PC: 500 Hz Optionally expandable to: 2,000 Hz Control cycle: 1,000 Hz PC interface: Ethernet Measurement signal runtime correction: for all channels Protection class electronics: IP32 Safety device: Swiveling front safety device Electrically monitored interlock Protective screen made of transparent polycarbonate Material thickness of protective screen: 6 mm Dimensions of safety device: Height: approx. 1,237 mm Width: approx. 435 mm Depth: approx. 238 mm Testing tools / accessories: Pneumatic universal holder for pen systems Max. clamping force: 200 N Compressed air supply: 8 bar, filtered and unlubricated Pneumatic 3-finger gripper Max. clamping force: 50 N Compressed air supply: 8 bar, filtered and unlubricated Alignment unit Torque sensor 2 Nm Xforce HP force sensor 1 kN Torsional drive Front safety device Zwick/Roell machine electronics Software: Zwick / Roell testXpert III testing softwareVersion: 1.2 + ALMEMO 2450 universal measuring device Humidity/temperature sensor FHAD4641 + Mettler Toledo precision balance Type: Mettler WXSE + Visual recognition system color Zwick Item No.: 3004644 Vision sensor: IV-G500CA Evaluation unit: IV-G10 Installation distance: 20 to 500 mm + Auto Injector Condition: used Optical condition according to the pictures Functionality according to the pictures The complete configuration of all components and accessories, as well as the calibration of the system, must be carried out by the customer themselves. Subject to changes, errors and prior sale.

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 1,688 h, load capacity: 2,500 kg, lifting height: 5,180 mm, free lift: 1,760 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,380 mm, battery capacity: 620 Ah, remaining battery capacity: 93 %, battery voltage: 80 V, DGUV certified until: 10/2027, fork length: 1,200 mm, total height: 2,380 mm, Equipment: 3rd hydraulic function, CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-25/600 electric forklift with the following specifications: * Operating hours: 1,688 * Lifting capacity: 2,500 kg * Lifting height: 5,180 mm * Overall height: 2,380 mm * Year of manufacture: 2017 Gbedpfxszfxzzo Ap Dju STILL 2.5-ton electric forklift with a full cabin and heating, battery at 93%, tires in good condition (rear tires new), triplex mast with full free lift, side shifter, lighting compliant with German Road Traffic Licensing Regulations (StVZO), fork length 1,200 mm (other fork lengths available upon request), new charger. Includes 1,000 hours of service according to STILL manufacturer specifications and a valid occupational safety inspection upon sale. Inspection, demonstration, and test drive are available by appointment. Sale is exclusively to commercial businesses; subject to prior sale, errors, and omissions. We can deliver your new forklift cost-effectively using our own ramp-equipped low-loader (transport costs upon request). Further information about us and other offers can be found on our website.

Condition: used, Year of construction: 2008, Roll production line König Basic Rex II Combiline 600 Year of manufacture: 2008 Condition: Currently undergoing maintenance; photos taken before maintenance For the production of round, oval, stamped, oblong, and flat products made from wheat dough, mixed wheat dough, cereal dough, or fine yeast dough Suitable for shaped rolls, oblong rolls, etc. Working width: 600 mm Max. hourly output: 7,500 pieces (5 rows) Max. hourly output: 4,500 pieces (3 rows, for oblong dough products) Weight range: 35–85 g Dough divider and rounder, type Basic Rex II, 5 rows Long-working board before the proofing cabinet Proofing cabinet with climate control Stamping station with reversible cups for stamping round and oblong products Gsdpfxsz A Ryno Ap Djbu Forming station with 2 pressure rollers and a driven upper belt Depositor for 60 x 80 cm or 60 x 100 cm baking trays and boards Manual removal of baking trays Includes stamping tools for Kaiser rolls, Housky rolls, and oblong dough rolls Includes dough divider block for 5- and 3-row operation

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Door/ramp combination, side door Equipment: - Aero Poly body - Ramp/door combination - Supports Net price: €15,546.22 / Gross price: €18,500.00 Article number: BVB235401820.01 Technical data: • Brand: Brian James • Model: Box Van 600 • Vehicle type: Box trailer • Vehicle condition: New • First registration: Without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 419 x 178 x 201 cm • External dimensions (LxWxH): 589 x 228 x 259 cm • Loading height of the floor: 44 cm • Permissible total weight: 3,500 kg • Unladen weight: 1,025 kg • Payload: 2,475 kg • Chassis: High-loader (wheels under the body) • Tires: 155/70R12C Gbjdpszy Awcsfx Ap Deu • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Black body made of high-quality, glass fiber reinforced plastic. Light in weight, yet extremely stable. • Daylight roof extending the entire length of the trailer. • 12-inch aluminum rims - black/silver • Maneuvering handles at the front and rear • Side doors on the front left and right, lockable • Full-height and full-width rear tailgate, lockable • Innovative door/ramp combination with extremely simple operation via the door lock: Can be used as a hinged door, ramp, or a combination of both. • Both ramps at the rear can also be individually switched to function as a door. • Internal height 2010 mm - Entry height at the rear 1990 mm • Recessed lashing rails on the left, right, and in the middle in the floor • Numerous lashing points offer flexible lashing options • Lashing rails mounted on the left and right on the side wall • Very stable steel frame, welded • Frame completely hot-dip galvanized • Spare wheel with holder mounted • Very stable V-drawbar, REINFORCED • ALKO overrun device and parking brake • Reversing assistance system • Steel casting coupling head with integrated high-security lock ALKO • Plastic mudguards • Rear supports at the rear on both sides with clamping bracket • 13-pole plug • Reversing lights • LED interior lights recessed in the roof with solar panel • Large LED safety lighting • Integrated rear fog light • Various marker lights at the front, side and rear • Heavy-duty support wheel • 5-year chassis warranty _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any desired additions! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: used, Year of construction: 2014, Kannegiesser belt conveyor GF 6250-680/600 RA1103 Make: Kannegiesser as good as new, exhibition machine Year of construction 2014 Conveyor length (FL): 6,250 mm Belt width (GB): 600 mm Nominal/outer width (NB): 680 mm Constant conveying speed: v=0.5 m/sec. Electrical data: 380V 0.25kW without control/connections to upstream and downstream conveyors Scope of delivery: without supports and side guides (please enquire if required) Optional: Supports Side guides on one or both sides Frequency inverter for stepless speed control Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Gsdpfx Apjtvb Iio Dsbu Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 1990, Transnorm curved belt conveyor left 65°-780-600-IR600 RA2000 Technical data: Manufacturer: Transnorm Year of manufacture: 1990 Condition: good (used) Motor: fully functional Gedpjk Abr Defx Ap Djbu conveying angle: 65 nominal/external width (NB): 780 mm belt width (GB): 600 mm innerradius (IR): 600 mm overall height (BH): 210 mm motor height (MH): 510 mm Motor type: SEW gear motor Motor power: kW 0.55 230/400 V 50Hz Conveying speed: please contact Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 1998, Transnorm conveyor belt GF 5700-600-500 Gbsdpon U Dymofx Ap Dou RA2091 Technical data: Conveyor length (NL): 5700 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor R32DT71D4 Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2014, Transnorm conveyor belt GF 14500-700-600 RA2147 Technical data: Conveyor length (NL): 14500 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Gbodeppfcajpfx Ap Deu Supporting feet: optionally available Conveying speed (v m/s): 0,25 Drive: SEW gear motor, R27 DRE80M4/MM15/LN Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2014, Transnorm conveyor belt GF 11380-600-500 RA2095 Technical data: Conveyor length (NL): 11380 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, SA37/T DRS71M4/MM07/LN Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Gbodpfxsrzd Als Ap Dju Side guide on one side and on both sides Frequency converter for stepless speed change,13 - 32 m/min Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics