Used Torque 600 Nm for sale (15,266)

Condition: used, Weiss Type: WK111-600 Weiss Climate Test Chamber, Air-cooled Performance Data for Temperature Tests: Temperature range: -5°C to +90°C Temporal temperature fluctuation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1 K (corresponds to temperature gradient): 1 to 2 K Temperature change rate: Heating: 0.5 K/min Cooling: 0.2 K/min Performance Data for Climatic Tests: Temperature range: +10 to +90°C Humidity range: 10 to 98% r.h. Temporal temperature fluctuation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1 K (corresponds to temperature gradient): 1 to 2 K Temporal humidity fluctuation: ±1 to ±3% Test Chamber Dimensions: Width 800 mm x Depth 800 mm x Height 950 mm Housing Dimensions: Width 1000 mm x Depth 1660 mm x Height 1975 mm Dkjdpfjygum Djx Afpsh Access Ports: 1 access port Ø 50 mm on the left side installed 1 access port Ø 125 mm on the right side installed Power Supply: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.3 kW Rated current: 10.0 A Refrigerant: R 404 A Capacity: 600 liters Weight: 540 kg For your security as a buyer, please note the following information! The following steps are performed on all our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and errors excepted!) If you have further questions, feel free to contact us by phone.

Condition: excellent (used), CTS Climate Test Chamber T-70/600 Water-Cooled Temperature Range: -70°C to +180°C Rated Voltage: 400V 3/N PE 50 Hz Rated Power: 6.7 kW Rated Current: 10.2 A Compressor: TFH2480Z/TFH2511Z, Refrigerant R23/R404A Control System: - Microprocessor-controlled regulation and monitoring system - Simple, user-friendly terminal integrated into the door - Digital display for set and actual temperature values - Easy adjustment via +/- keys - Digital input for temperature in °C - PLC-compatible - Up to 100 test programs possible - RS 232 interface - 2 free switching channels for user-side test specimen connections Shelving: Stainless steel, shelf area 820 x 710 mm Load capacity per shelf max. 35 kg Total load capacity with full shelf configuration 100 kg Djdpfoygultex Afpjkh Cooling Unit: Water-cooled, low-noise, fully hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R404A/R23 Temperature Testing: Temperature range -70°C to +180°C Temperature deviation ±0.1 to 10.3 K over time Temperature change rate according to DIN 50 011, Part 12 measured at the center of the test chamber: Heating: 2.5 K/min Cooling: 2 K/min Thermal radiation max. 1500 W at +20°C Technical data refer to an ambient temperature of +25°C, rated voltage 400 V, without test specimen, without thermal radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions 850 x 830 x 850 mm (W x D x H) External dimensions 1050 x 1850 x 1900 mm (W x D x H) Operating Data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 6.7 kW Rated current 10.2 A Protection class IP 22 Condensate drain non-pressurized, R 1/2" internal thread Sound pressure level < 62 dB(A) Weight approx. 400 kg For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information reserved!) Further questions can be answered by phone.

Condition: excellent (used), Weiss Model: WK3 600/0-M Weiss Climate Test Chamber, Water-Cooled Series: WK3-../0 with SIMPAC* Controller Test chamber volume: approx. 600 liters Test chamber dimensions: Height 950 mm, Width 800 mm, Depth 800 mm External dimensions: Height 1995 mm, Width 1090 mm, Depth 1660 mm Operating data: Test chamber lighting: LED 24 V, 6.8 W / Halogen bulb 2 x 24V, 50W Dksdpfx Asygulmsfpoh Rated voltage: 1/N / PE AC 230 V ±10% 50 Hz Rated power: 2.3 kW Rated current: 10 A Site-provided fuse: 16 A slow-blow Control cabinet and operator panel protection class: IP 54 Maximum heat emission to environment: 1200 W Sound pressure level: Measured at a distance of 1m from the front, at a height of 1.6m: 46 dB(A) Data for temperature tests: Temperature range: -5°C to +90°C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1 K Temperature gradient (according to IEC 60068-3-5) Temperature change rate: Heating 0.6 K/min Cooling 0.3 K/min Heat compensation at +20°C to +50°C: 200 W Data for climatic tests: Temperature range: +10°C to +90°C Dew point range: 4 to +89.5°C Humidity range: 10 to 98 % r.h. Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.3 K Spatial temperature deviation: ± 0.5 to ± 1 K Temporal humidity deviation: +1 to +3 % r.h. Refrigerant: R-404A Weight: 610 kg For your safety as a buyer, please note the following information! The following points are carried out in advance on our offered chambers: 1. Functionality check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Technical data and information subject to change and errors!) We are happy to answer any further questions you may have by phone.

Condition: excellent (used), We are offering a Weiss temperature test chamber for sale. Weiss Temperature Test Chamber with S!MCON / 32-controller, water-cooled Control Unit: "Touchpanel" All control and operation commands can be initiated by simply touching the function symbols on the "Touchpanel" control unit. Adjustable Feet The test chamber is equipped with adjustable feet to compensate for floor unevenness and to provide adequate ventilation for the machine section. Cable Ports Cable ports are installed on both the right and left sides of the test chamber. These allow measurement cables and test devices to be routed into the test space. Ports included as standard: - R1: NW 125 mm - L1: NW 50 mm (The refrigerant has been converted to R-452A) Test Chamber Volume: approx. 600 liters External dimensions with hinges and door lock: Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions without hinges and door lock: Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Temperature Test Data: Temperature range: -42 to +180 °C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (according to IEC 60068-3-5): - Heating: 4.0 K/min - Cooling: 3.0 K/min Maximum thermal compensation: 2500 W Operating Data: - Test chamber lighting: Halogen bulb 2 x 24V, 50W - Rated voltage: 3/N/PE AC 400V ±10% 50Hz - Rated current: 15 A; Rated power: 7.8 kW - Fuse (on-site): 16 A slow-blow - Sound pressure level: approx. 58 dB(A) (measured 1 m in front, 1 m height) - Refrigerant: R-452A - Weight: 620 kg Dksdpfx Aeyguh Isfpsh Type: WT3-600/40 Important information for your safety as a buyer! The following steps are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. Refill with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors reserved!) We are happy to answer any further questions by phone.

Condition: new, Year of construction: 2025, 600 mm 500 mm 400 mm 1000x500 mm 1200x250 mm 40-3200 U/min Dkedpfx Afowp Trrspoh DIN 2080 ISO 40

Condition: new, Year of construction: 2025, 600 mm 500 mm Dkedpfewp Tqbsx Afpeh 400 mm 1000x500 mm 1200x250 mm 40-3200 U/min DIN 2080 ISO 40

Condition: new, Year of construction: 2026, 600 HD available immediately Serialnumber 965 Special price from our stock 06188 Landsberg, Germany Dedpfx Afeib Ircepekh The 600HD alligator shear is a fast and strong metal cutting shear with an extended hold down clamp, making it ideal for every cutting and cleaning task whether cable, plastic sections or window frames. Its cutting capacity is up to 63mm, 2″ inch mild steel round bar. The 600HD alligator shear is probably best known for dealing with car radiators. It was designed and built following requests from customers who were looking for a shear with a longer blade to cut larger items such as car radiators which it cuts through in one pass. The automatic hold down clamp holds material in place during the cutting cycle and prevents kick back which speeds up processing and improves operator safety. As with all McIntyre shears, opening and closing the jaws is controlled from a moveable foot pedal. As soon as the foot pedal is released, the cutting blades return to the open position. However, a continuous cutting action can be achieved by keeping foot pressure on the pedal. The 600HD can be supplied with an electric motor or with a 2-cylinder diesel engine.

Condition: excellent (used), Weiss Type: WK11 - 600/70/5 Weiss Climate Chamber Water-Cooled The Weiss climate chamber WK11-600/70/5 with approximately 600 liters usable volume is suitable for temperature and humidity testing, as well as for the conditioning of samples and materials in a range from −70 °C to +180 °C. Simcon/32 - Net controller Technical Data: Test chamber designation: WK11-600/70/5 External dimensions with hinges and door lock: Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door lock: Height 1995 mm, Width 1000 mm, Depth 800 mm Internal dimensions: Height 950 mm, Width 800 mm, Depth 800 mm Feedthroughs: 2x R1 NW 125 mm ∅ 1x L1 NW 50 mm ∅ Test chamber volume: approx. 600 liters Temperature Test Data: Temperature range: -70 °C to +180°C Temporal temperature deviations at the center of usable space: ±0.1 to ±0.5 K Spatial temperature deviations: ±0.5 to ±2 K Temperature gradient: 1 to 4 K Temperature change rate: Heating: 6 K/min Cooling: 6 K/min Heat compensation: At +20 °C: 5000 W At -20 °C: 5000 W Climate Test Data: Temperature range: +10 to +95 °C Humidity range: 10 to 98% r. H. Dkjdpfxoyglb Sj Afpsh Temporal temperature deviations at the center of usable space: ±0.1 to ±0.3 K Spatial temperature deviations: ±0.5 to ±1 K Temperature gradient: 1 to 2 Humidity fluctuation (temporal, center of usable space): ±1 to ±3% r. H. Heat compensation: 500 W 3/N/PE AC 400V ±10% 50Hz Rated power: 16.5 kW Rated current: 29 A Main fuse (to be provided by customer): 32 A slow-blow Permissible test material weight: Total load of racks: 80 kg Test chamber floor: 80 kg, Insert rack: 40 kg Weight: 675 kg Refrigerants: R452A / R23 Important Note: "The table shown in the photos is not included in the sale." For your safety as a buyer, please note the following information: The following points are completed on our offered chambers beforehand: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical specifications subject to change and errors excepted!) We are happy to answer any further questions over the phone.

Condition: good (used), Year of construction: 2008, fuel type: electric, fork length: 1 mm, Empty weight: 4.585 kg Lifting capacity: 2.500 kg Dodpfxsx Hhcgs Afpokh CE mark: yes Technical condition: good Visual appearance: good Transport dimensions (LxWxH): 2,38x1,3 Production country: DE Please contact Christian Theißen for more information Manufacturer: Still Model: RX 60-25 Year of build: 2008 Condition: Used Data: Max. lifting height: 3,65 m Max. Lifting capacity: 2500 kg Length forks: 1,25 m Drive type: Electric Domensions LxW (without forks): 2,38 x 1,30 m Building height: 2,73 m Own weight: 4.585 kg Special features: Side slider, protective roof, windshield Location: 41468 Neuss immediately available

Condition: used, Used Matcon approximately 600 litre stainless steel IBC. Unit measures approximately 1,000mm long x 1,000mm wide x 170mm straight side with a 600mm deep conical bottom. Mounted on forkliftable base. Includes discharge cone. Specifications: Capacity (gal/l): 158.5 gal Material Grade: Stainless steel Dedeyh I Twjpfx Afpokh Dimensions: 39.37 x 39.37 x 6.69, 23.62 deep

Condition: used, Clipping machine Manufacturer: Poly Clip Model: PDC 600 Semi-automatic double clipper Width: 1.000 – 1.100 mm Depth: 780 mm Height: 1.795 – 2.005 mm Weight: 118 kg Compressed air: 4 – 6 bar / 0,4 – 0,6 MPa Air consumption: 4 bar 6,5 NL/cycle Air consumption: 6 bar 8,5 NL/c S-Clip: S 625, S 628, S 632, S 638 Dodpfxjvy Trzo Afpokh

Condition: used, Washing machine Manufacturer: Nowicki Model: MPU-600/1P Made of stainless steel Dimensions: 390x140x200cm Electric power: 7.7kW Voltage: 3 x 400V 50Hz Dodpsttz Urefx Afpskh Weight: 740kg

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 5,033 h, load capacity: 5,000 kg, lifting height: 4,330 mm, free lift: 1,550 mm, fuel type: diesel, mast type: triplex, construction height: 2,300 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Load center: 600 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Automatic Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Superelastic Front tires condition: 80 - 100% Rear tires type: Superelastic Dkedpfjx Ixrbjx Afpsh Rear tires condition: 80 - 100% Description: Price includes a new safety inspection (UVV), paintwork very good (new paintwork available for a surcharge of EUR 1,000 net). Special offer week 5/6. We are happy to organize cost-effective transport for you. Lease purchase available! Sideshift, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, road traffic approval (STVZO), full cab, full free lift, CE certificate, Fingertip control

Year of construction: 2016, condition: excellent (used), MASA hydraulic press for slabs Year: 2016 Type: Uni 2000-600/7, 7 stations, pressing force 600 tons Moulds: 60x60 cm, max thickness 10 cm Dkedpfxsyhlkpe Afpjh Transport system (finger car) to curing chamber 3,000 steel curing pallets; 250 galvanized control conveyors 8 curing chambers with ventilation and steam pipe Pallet brushing unit with filtering unit, max width 400 to 600 mm Manual packaging system REX-2000 calibrating station, 2 workstations 6-head grinding machine Kraft Energy curing system Chamfer grinding machine, 12 m drying line, 8 fans Complete Teka concrete plant (2 mixers: 750 L and 325 L) with 8-compartment storage bin with extraction belt, bucket weigher on load cell External storage silo with 50-meter belt conveyor. Reversible belt on top 8-bin storage hopper Laminating system for special tiles for bonding steel sheet under the slab Stacking device for curing chambers

Condition: new, functionality: fully functional, Year of construction: 2025, 🚧 50-600 T/H Sand & Gravel Production Line – Transforming Raw Materials into High-Quality Aggregates! 🚧 🌟 General Introduction Looking for a reliable and efficient solution for your sand and gravel production needs? Our 50-600 T/H Sand & Gravel Production Line is a high-performance system designed to meet the diverse requirements of construction, infrastructure, and industrial projects. Whether you need coarse aggregates or fine sand, this production line ensures precision, efficiency, and scalability. --- Dkodpfsq Nywxsx Afpeh 🏗️ Wide Range of Applications Our sand and gravel production line is perfect for: - Construction Projects: Producing aggregates for concrete, asphalt, and roadbeds. - Mining Operations: Processing various ores and minerals. - Infrastructure Development: Creating high-quality materials for bridges, dams, and highways. - Commercial Sand Supply: Meeting market demand for sand and gravel in bulk. --- 💎 Key Advantages ### 1. High Capacity & Versatility - Produces 50-600 tons per hour, easily scaling to match project demands. - Handles a wide range of raw materials, including limestone, granite, basalt, and river stones. ### 2. Advanced Technology - Incorporates cutting-edge crushing, screening, and washing equipment for consistent quality. - Optimized for energy efficiency, reducing operational costs. ### 3. Customizable Solutions - Configurable to meet your specific requirements, from particle size to layout design. - Offers flexibility in combining different crushers (jaw, cone, impact) and vibrating screens. ### 4. Durable & Low Maintenance - Built with robust materials to withstand heavy-duty operations. - Easy-to-maintain design minimizes downtime and extends equipment lifespan. ### 5. Environmentally Friendly - Features dust suppression systems and water recycling units to reduce environmental impact. - Promotes sustainable practices in aggregate production. --- 🚜 Your Complete Solution Our production line includes: - Primary Crushing: Breaks down large rocks into manageable sizes. - Secondary Crushing: Refines materials to desired specifications. - Screening Equipment: Ensures uniform sizing and quality control. - Washing System: Removes impurities for cleaner, higher-grade aggregates.

Condition: new, Sand Gravel Fabrication Plant: Essential Solution for Modern Construction Needs In the construction and infrastructure industry, high-quality sand and gravel are critical raw materials for creating concrete, asphalt, and other foundational elements. A Sand Gravel Fabrication Plant is the cornerstone of producing these materials efficiently and at scale. With advanced technology, versatility, and scalability, these plants cater to a wide range of projects, ensuring consistent quality and meeting the growing demand for construction materials. This article explores the general introduction, features, and applications of sand gravel fabrication plants, including both stationary and mobile systems. General Introduction to Sand Gravel Fabrication Plants A sand gravel fabrication plant is a specialized facility designed to process raw materials such as sand, gravel, and aggregates into construction-grade products. These plants combine various equipment, including crushers, screens, conveyors, washers, and storage units, to convert raw materials into ready-to-use aggregates. There are two primary types of sand gravel fabrication plants: Stationary Fabrication Plants: Fixed installations designed for high-capacity production. Ideal for large-scale operations and long-term projects. Mobile Sand Gravel Fabrication Plants: Portable systems that can be transported to different project sites. Perfect for temporary operations and projects in remote locations. Both types are equipped with advanced machinery and automation systems to ensure high efficiency, precision, and sustainability. Applications of Sand Gravel Fabrication Plants Sand gravel fabrication plants are indispensable across multiple industries due to their ability to produce high-quality aggregates. Key applications include: 1. Construction and Infrastructure Produces sand and gravel for concrete, asphalt, and base materials. Supports large-scale infrastructure projects such as highways, bridges, airports, and railways. 2. Residential and Commercial Development Supplies aggregates for building foundations, driveways, landscaping, and drainage systems. Plays a vital role in residential housing and commercial property construction. 3. Road Construction Provides high-quality crushed stones and sand for roadbeds, pavements, and highways. Ensures durability and longevity of road surfaces. 4. Mining and Quarrying Efficiently processes mined materials into usable aggregates. Enhances productivity in quarrying operations with optimized material handling systems. 5. Environmental Restoration Supplies aggregates for erosion control, land reclamation, and shoreline protection projects. Facilitates sustainable environmental rehabilitation efforts. 6. Recycling of Construction Waste Mobile sand gravel fabrication plants are ideal for recycling concrete and asphalt. Dkjdpevlwqlofx Afpoh Converts waste materials into usable aggregates, reducing landfill burden and promoting sustainability. Stationary vs. Mobile Sand Gravel Fabrication Plants Stationary Fabrication Plants Best For: Long-term, large-scale projects and industrial operations. Advantages: High-capacity production. Robust and durable structures. Advanced automation for minimal manual intervention.

Condition: used, Year of construction: 2007, x-travel 600 mm y-travel 500 mm z-travel 500 mm Control Heidenhain iTNC 530 spindle tunring speed 15.000 U/min max. torque 190 Nm tool taper HSK 63 table surface area 600 x 600 mm table load capacity 350 kg feed 60.000 mm/min auto power on hours ca. 7.975 h NC program ON ca. 1.999 h spindle hours ca. 1.378 h weight of the machine ca. 9.800 kg Overall size ca. 5.000 x 4.500 x 3.110 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - External coolant system with 3 nozzles, 4 bar Dkedeydqq Tspfx Afpoh - Internal coolant system, 20 bar - Scraper belt chip conveyor Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: good (used), Year of construction: 2012, clamping force: 2,800 kN, Equipment: documentation/manual, Demag Systec 280/630-600 (2012) Clamping force: 280 t Distance between tie bars V: 630 mm Distance between tie bars H: 630 mm Plate size: 950x950 mm Min tool height: 330 mm Max opening: 1385 (1505 mm) Shot volume: 323 cm3 Screw diameter: 45 mm Shot weight: 294 g Dkodjxykw Repfx Afpjh Type: Horizontal Drive: Hydraulic Euromap 67 16 hotrunner zones 4 core pullers 2 air blow

Condition: good (used), Loeffler stone cutting saw with manual measurement, fixed table (non-tilting). Djdsx Hft Nspfx Afpjkh

Condition: used, Year of construction: 1986, Roll diameter: 600 mm Cutting height: 385 mm Motor power: 2.2 kW Table tiltable Table size: 540 x 600 mm Total height: 2100 mm Weight: approx. 260 kg Storage location: Nattheim Dkedpfx Asw D Aybefpjh

Condition: used, Year of construction: 1999, machine/vehicle number: 117620, input voltage: 400 V, input frequency: 50 Hz, This Knuth flat-bed CNC lathe, including accessories, type: Vector 600, is being auctioned online as part of our industrial auction/machine auction for the closure of Hofer Getriebetechnik – workshop equipment, lifts, tools, machinery, forklifts, office furniture, metal cabinets. Dksdeyc Uw Iopfx Afpoh

Condition: as good as new (ex-display), 600 Kg load capacity welding rotary table adjustable in height with plate diameter 1000mm height min. 0,65m, max. 1,530m speed from 0,01 - 1,1 rpm inclination up to 135 Dkodpfx Afod D D Hljpoh hand and foot remote control with speed indicator very robust

Condition: new, Year of construction: 2024, 600 kg load capacity Dedpfx Afjg Tdpgopokh Welding turntable height adjustable with through hole 100 mm Plate diameter 700mm Horizontal height min. 0.65m, max. 1.25m Height tilted min. 0.45m, max. 0.95m Speed from 0.01 - 1.3 rpm Tilt up to 135° Hand and foot remote control with speed display very robust

Condition: new, Year of construction: 2024, functionality: fully functional, load capacity: 300 kg, Welding rotary table KT 600, with 100mm through hole Load horizontally 600 KG, tilted 300 KG Power consumption AC 380V, 50 Hz Rotary motor AC 400W Table diameter 650mm Height 700mm, width 800mm, length 800mm Weight 155 KG Infinitely variable electric tilt range 0 – 90° Speed 0.2 – 1.9 rpm Dedpfx Ajvu Dpyofpokh Welding current transmission max. 500 A Incl. hand remote control and foot remote control Surcharge: Quick-release jaw chuck Diameter 500mm, €750 CE mark/approval

Condition: new, Year of construction: 2024, load capacity: 600 kg, Welding rotary table KT 600, with 100mm through hole Load horizontally 600 KG, tilted 300 KG Power consumption AC 380V, 50 Hz Rotary motor AC 400W Dedpfxovu Dqqj Afpokh Table diameter 650mm Height 700mm, width 800mm, length 800mm Thcafi2V2 Weight 155 KG Infinitely variable electric tilt range 0 – 90° Speed 0.3 – 2.5 rpm Welding current transmission max. 500 A Incl. hand remote control foot remote control Surcharge: Quick-release jaw chuck Diameter 400mm, €550 Diameter 500mm, €750 CE mark/approval