Used Torque Calibration for sale (3,464)

Condition: ready for operation (used), AGIE Isotorque Driver 622064.4, serial number as per photo, used, good condition, 100% functional, scope of delivery as per photos Nedoi D Twaopfx Adwecl

Condition: new, Stritorque HDD 09J - Pa-Ent-At-A-C-AAM SN:006499, unused, 100% functional, scope of delivery as per photo Ncsdpfx Asx Dwdfsdwel

Condition: excellent (used), Pneumatic screwdriver PT72 2000 Nm System Norbar Mod. 18033, Ncsdpfx Ajfhqmbedwol PT72, NP 4985 € Condition: Used. Shipping package up to 12 kg. Further articles - new and used - can be found in our shop! International shipping costs on request!

Year of construction: 2003, condition: used, Manufacturer: Zanchetta Model: Piraña Year: 2003   Type : Calibrator for granulated or wet products Applications: pharmaceutical, food, chemical, cosmetics …   Installed electrical power: 3 kW Power supply : 380V – 3 phases – 50 Hz Motor speed : 1440 rpm Dry air consumption: 15 L/min at 2.5 bars Available basket diameters: min Ø 800µ – max 4500µ Treated product moisture content: max. 10 %. 10 % Noise level: < 85 dBA Dimensions: 700 x 1500 x 1400 mm Height to drum axis: 900 mm Product infeed diameter : 150 mm Ncedpjx R Dk Iefx Adwsl Product outlet diameter : 150 mm Control panel with speed variation Paper documentation available

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, operating hours: 5 h, machine/vehicle number: 6151570000, From our demonstration tool inventory, tested and fully functional: Ncedpfx Asv Tbz Dsdwel Chicago Pneumatic Cordless electric High-Torque Wrench CP8613 Demonstration tool with charger + 2 batteries (36 V 2.5 Ah) Accuracy (6 sigma): +/- 4% No-load speed: 10 rpm Min/Max torque range: 220 to 960 ft.lbs Working torque: 290 to 770 ft.lbs Drive: 3/4" square drive Length: 12.52 in. Weight with battery & reaction arm: 11.7 lbs Other tools for industrial manufacturing and maintenance on request.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 10 h, machine/vehicle number: 6151570380, From our demonstration tool inventory, tested and fully functional: Chicago Pneumatic Cordless electric High-Torque Wrench CP8603 Demonstration tool with charger + 2 batteries (36 V 2.5 Ah) No-load speed: 20 rpm Min/Max torque range: 50 to 240 ft.lbs Njdpfx Adov Tbh Rowecl Working torque: 65 to 190 ft.lbs Drive: 3/4" square drive Length: 11.06 in. Weight with battery & reaction arm: 9.0 lbs

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, operating hours: 5 h, machine/vehicle number: 6151570000, From our demonstration tool inventory, tested and fully functional: Nedpjv Tbpzefx Adwjcl Chicago Pneumatic Cordless electric High-Torque Wrench CP8613 Demonstration tool with charger + 2 batteries (36 V 2.5 Ah) Accuracy (6 sigma): +/- 4% No-load speed: 10 rpm Min/Max torque range: 220 to 960 ft.lbs Working torque: 290 to 770 ft.lbs Drive: 3/4" square drive Length: 12.52 in. Weight with battery & reaction arm: 11.7 lbs Other tools for industrial manufacturing and maintenance on request.

Condition: new, Promess KA-EMF20/150 Servo press 20 KN Manufacturer: Promess Type: KA-EMF20/150 Njdsrgn N Sopfx Adwscl Type: Servo press KN: 20 Item condition: New Calibrated: Yes Strain gauge amplifier: BA 62601 More servo presses new and used - can be found in our store! International shipping costs on request!

Year of construction: 2025, condition: new, GeoBoost-7000 Combined bench for turbocharger geometry calibration and performance evaluation. Stand for static and dynamic calibration and testing of turbocharger. It has a combined two-position design, which allows testing the turbocharger in two modes - rapid static calibration of turbocharger geometry - Full dynamic diagnostics at different operating modes GeoBoost-7000 will allow you to carry out professional testing of turbocharger operation during repair, tuning or modernization. The availability of two working zones of the machine depending on the testing method helps to carry out comprehensive diagnostics. HIGHLIGHTS • Simulates real-world operating conditions for accurate turbocharger diagnostics and tuning. • Flexible and versatile to work with a variety of turbocharger models. • All types of turbochargers can be installed using the accessories provided. • Oil leak testing using heated oil and compressed air. • N75 turbocharger control valve testing. KEY FEATURES - Ability to adjust the extreme position of the blades of the air flow control mechanism. - Adjusting the length of the stem to adjust the actuation torque of the air flow control mechanism. - Real-world turbocharger testing; - Real-time geometry tuning; - Performance testing of actuators: vacuum, pneumatic and electric types; - Diagnosis of servo-drives of electric actuators (optional); - Post-assembly testing of the turbocharger for oil leakage; - Availability of a high capacity vacuum pump to create the required vacuum and air flow. - Testing the turbine according to the manufacturer's test plan; Nodpfxevtn Hms Adwjcl - Calculate turbocharger performance; - Plot supercharger inlet and turbocharger outlet boost vs. flow; - Construct the resulting graph; - Generate and print test reports. SPECIFICATIONS Maximum rotor speed 99 000 rpm Maximum air flow rate of compressor 110 m³/min Maximum pressure of compressor 900mbar Maximum vacuum created by the vacuum pump -800mbar Power supply 380V, 3Ph, 50Hz Power input 6 kW Dimensions 1700 х 900 х 1500 mm Weight 400 kg

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,215 h, controller manufacturer: HEIDENHAIN, controller model: TNC 640, spindle speed (max.): 20,000 rpm, spindle motor power: 35,000 W, number of axes: 5, This 5 axis MTcut UDS80H-5A was manufactured in 2019. It features a 20,000 rpm spindle, 120 Nm torque, and 35 kW drive power. Equipped with a HSK63 tool holder, 96-position tool changer, and a Kessler rotary tilting table with an 800 mm diameter. Includes Heidenhain TNC 640 control, 15" TFT screen, and Ethernet connectivity. Ideal for precision machining with its Heidenhain glass scales and BLUM laser tool measurement. Contact us for more information about this machine. • Operating hours: Control unit 6,904 h; Machine 5,480 h; Program runtime 2,215 h • Spindle: 120 Nm torque, separate spindle cooling for constant temperature • Tool interface: HSK63 with blow-out function • Rotary table: 800 mm diameter; Kessler rotary tilting table with 2 A-axes and 1 C-axis, direct-drive torque motors • Feedback: Heidenhain glass scales in all 5 axes • Tool changer: 96 positions with double-arm gripper • Control: 15" color TFT screen • Connectivity: Ethernet interface, 2x USB ports • Control functions: Plain text programming; short block processing time; create new program while another is running; proven Heidenhain machining cycles • Electronic handwheel • CE certified Ncjdpfx Adsx D In Uewsl Additional equipment • Chip conveyor • Coolant system • Internal high-pressure coolant 50 bar with belt filter system • Coolant and compressed air gun • BLUM laser tool measurement • Heidenhain TS460 workpiece probe system for HSK63 with radio and infrared transmission • Heidenhain KinematicsOpt including Heidenhain calibration sphere KKH 250 • Extraction system: Filtermist FX4002, air volume 1,250 m³/h • Rotating viewing window • Work area light • Tool package Technical Specification Taper Size HSK 63

Condition: refurbished (used), functionality: fully functional, travel distance X-axis: 425 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 240 mm, spindle speed (max.): 42,000 rpm, table load: 60 kg, overall weight: 6,000 kg, 5-axis HSC milling machine Röders RXP500DS with linear direct drives in all axes and torque drives in the rotary axes. The machine is completely overhauled, tested and measured in our company. The machine meets the new machine tolerance again! Travel paths: X455mm, Y400mm, Z240mm Distance spindle/table: approx. 315mm - Linear direct drives in all axes - wear-free - 42-way tool changer - High-precision cooling device for the entire machine (hysteresis +/- 0.15K) - Measuring laser for fully automatic measurement of milling tools (length/diameter/contour/cone angle) and wear monitoring including tool cleaning before measuring - Handbox - Remote maintenance - Automatic 3D probe including calibration ball in the tool changer - Minimum quantity lubrication - HSK40E spindle with max. 42,000 rpm - Erowa ITS100 zero point clamping system integrated in the machine table Ncjdpfstt Atwex Adwol - Automation package for retrofitting the machine with a pallet changer - Handbox A tour of the machine in Ready-to-use condition is possible at any time. You are welcome to find out more about the type and scope of our overhauled machines on our website or on our Hüttmann YouTube channel.

Condition: refurbished (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 240 mm, overall weight: 6,000 kg, spindle speed (max.): 42,000 rpm, 5-axis HSC milling machine Röders RXP500DSC with linear direct drives in all axes and torque drives in the rotary axes. Travels: X450mm, Y400mm, Z240mm Spindle / table distance: approx. 315mm - Linear direct drives in all axes - wear-free Specification: - Tool changer places: 19 - Cooling unit for drives, motors, spindle and cable cabinet - Measuring laser for the fully automatic measuring of milling tools (length / diameter / contour / cone angle) as well as wear monitoring including tool cleaning before measuring - Handbox - Remote maintenance - Automatic 3D probe including calibration ball in the tool changer - Minimal quantity lubrication - emulsion cooling Nodpfx Aett Argjdwjcl - Spindle HSK40E with max. 42.000 rpm - Spindle compensation - Zero point clamping system Erowa integrated in the machine table - manual operating of chuck clamping - Automation package for retrofitting the machine with a pallet changer - Handbox The machine is overhauled in our house and is now in almost new condition. The machine can be inspected and tested under power after completion at our site. Please make an appointment with us!

Condition: excellent (used), Stäubli Measuring Robot Here we offer a very well maintained Stäubli measuring robot. Measuring robotics to measure, analyse and evaluate quality features RobFlow (measuring robotics software) full version and dongle on integrated Siemens industrial PC 6AG4114-1NC22-4EX0 Laser Distance Sensor Model ILR 1181-30 Technical data: Measuring range 0.1 ... 50 m on natural, diffuse reflecting surfaces, 50 m to a maximum of 150 m on reflector panel Linearity ±2 mm (+15°C ... +30°C), ±5 mm (-10°C ... +50°C) Resolution 0,1 mm Repeat accuracy ≤ 0.5 mm Ncsdpfx Adefz Dhtewsl Response time 100 ms ... 6 s (ILR 1181-30) 20 ms ... 6 s (ILR 1182-30) Laser according to IEC 825-1 / EN 60825 Red 650 nm, laser protection class 2, power ≤ 1 mW Beam diameter < 11 mm at 10 m distance Beam diameter < 35 mm at 50 m distance Beam diameter < 65 mm at 100 m distance Laser divergence 0.6 mrad Operating temperature -10°C ... +50°C Storage temperature -20°C ... +70°C applications: RobFlow is a modular system, the range of functions of the standard package can be extended by additional Plugins for special tasks as well as customer-specific extensions can be added. With the help of the available functions, the following applications can be implemented, for example: Infotainment tests: Optical and haptic tests Single actuations and path movements straight, meandering, curve segments Analysis and evaluation functions Steering column tests: Haptic tests along complex paths Wide measuring range due to multiple calibrated Force/torque sensor Easy to [...]

Condition: used, Year of construction: 2019, x-travel 800 mm y-travel 1020 mm z-travel 970 mm Control TNC640 B - axis 360 x 0,001 ° Ncedpexn Amaefx Adwjl feed B-axis max. 50,00 U/min A - axis -185 / +45 x 0,001 ° feed A-axis max. 25,00 U/min feed x-axis 1 - 65.000 mm/min feed y- axis 1 - 50.000 mm/min Feed z- axis 1 - 80.000 mm / min. rapid traverse X/Y/Z 60 / 50 / 80 m/min spindle turning speed - stepless 1 - 16.000 U/min power capacity at 100 % load 25,00 kW power capacity at 40 % load 32,00 KW max. torque at 40% / 100% load 206,00 / 159,00 Nm spindle diameter in front bearing 80 mm tool taper HSK-A63 tool magazin: 70 tool length - max. 500 mm tool diameter 118 mm tool diameter with 2 vacant positions 260 mm tool total weight 22,00 kg Chip to chip time 4,2 sec. size of pallet Ø 770 mm workpiece weight 800 kg interference diameter 900 mm total power requirement 35,00 kW weight of the machine ca. 25,00 t dimensions of the machine ca. 7,00 x 3,50 x H3,50 m 5-axis machining center with Heidenhain TNC640 control, integrated KNOLL coolant system KF220, coolant high-pressure 23bar, coolant through the spindle, chip conveyor, measuring probe Heidenhain TS640, electromechanical tool length check, Swivel axis calibration GSC, collision monitoring "DCM Collision", BLUM-Laser, GROB Spindle-diagnosis (GSD), kinematics-set.

Condition: reconditioned (used), Year of construction: 1997, operating hours: 216 h, functionality: fully functional, Equipment: documentation/manual, A reconditioned and functional profile line for rigid PVC-profiles, consisting of: Twin-screw extruder, parallel Njdpfjx Rx D Asx Adwscl Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard powder Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. approx.30 rpm Screw torque: 10000 Nm Motor power: 3.8 - 23.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers PMA KS40 Accessories: Mass pressure sensor and mass temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Total weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: recondition and checked for function Vacuum Calibration Unit Manufacturer: Blake Kunststoffproduktionsanlagen Type: 203-3-4,0 Year of manufacture: 1997 Serial number: 758 Total length: 5600 mm Vacuum pumps: 3 x 5.5 kW Longitudinal adjustment: electromotive Height/lateral adjustment: front and rear via threaded spindle and handwheel V2A tub: interior/exterior width: 450/700mm, length: 4500 mm Connected load: approx. 20 kW Total weight: approx. 3.000 kg Condition: recondition and checked for function Caterpillar Haul-Off Manufacturer: Blake Kunststoffproduktionsanlagen Type: 303-1600-270 Year of manufacture: 1997 Pulling force: approx. 40,000 N Pads width: 300 mm Passage width: max. 500 mm Passage hight: 100 mm Effective contact length: 2400 mm Haul-off speed: max. approx. 8.0 m/min. Extrusion height: 1000 – 1200 mm Caterpillar clamping: pneumatic, at the front and back Dimensions: 4000 x 1200 x 2300 mm (LxWxH) Weight: approx. 3000 kg Condition: recondition and checked for function Profile cross-section, max.: approx. 500 x 100 mm Note: The vacuum calibration unit, including caterpillar pull-off, can also be purchased separately.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, operating hours of spindle: 1,200 h, 1 unit CNC machining center C 12 U with 5-axis simultaneous Heidenhain iTNC 640 control Manufacturer: Hermle Year of manufacture: 2015 Technical specifications Working area: - Travel paths X-axis: 350 mm Y-axis: 440 mm Z-axis: 330 mm - Swivel range A-axis: +115° / -115° - Swivel range C-axis: 360° - Direct linear measuring system, resolution: 0.0001 mm - NC rotary/swivel table: 320 mm diameter - Table load capacity: 100 kg - A-axis rotation speed: 25 rpm - C-axis rotation speed: 40 rpm Main spindle drive: - Drive power (100% - 40% duty cycle): 17 - 25 kW - Torque (100% - 40% duty cycle): 54 - 80 Nm - Spindle speed: 20 - 18,000 rpm - Spindle taper: HSK-63 Rapid traverse In X, Y, and Z-axes: 30 m/min Linear acceleration: 4 m/s² Tool changer: - Magazine capacity: 36 tools - Max. tool diameter: 80 mm - Chip-to-chip time as per VDI 2852: 4.5 sec Space requirements: 4.00 x 4.00 x 3.10 m Machine weight approx.: 7.5 t Ncodsx N Dt Hjpfx Adwsl Equipment Clamping plate, approx. 65 HSK 63 tool holders, 2 machine vices, 1 three-jaw chuck, electronic handwheel, Heidenhain probe, Blum calibration pin, chip flushing gun, emulsion mist extraction, Blum tool breakage/tool measurement A1, tool setting device, kinematics suitcase, chip conveyor without IKZ (internal coolant supply) Delivery terms: ex stock, Bad Emstal Availability: available from January 2026, by arrangement; machine can be demonstrated under power Technical data subject to change without notice.

Condition: good (used), Year of construction: 2022, operating hours: 2,200 h, functionality: fully functional, machine/vehicle number: 328827, turning length: 900 mm, turning diameter: 600 mm, spindle motor power: 11,000 W, spindle speed (max.): 6,000 rpm, spindle bore: 61 mm, travel distance X-axis: 535 mm, travel distance Y-axis: 210 mm, travel distance Z-axis: 900 mm, mount diameter: 600 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, milling spindle length: 300 mm, rotational speed (max.): 20,000 rpm, type of input current: three-phase, torque: 184 Nm, bar passage: 61 mm, feed rate X-axis: 48 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, bar diameter (max.): 61 mm, overall weight: 12,000 kg, spindle diameter: 152 mm, Equipment: documentation/manual, The machine is equipped with the latest Mazatrol SmoothAi control, fitted as standard. The ease of conversational program creation in Mazatrol mode is ensured by the intuitive layout of auxiliary functions, supported by graphical and, above all, clear prompts and comments. TOOL HOLDERS SHOWN IN THE PHOTOS ARE INCLUDED IN THE PRICE. STANDARD TECHNICAL SPECIFICATION Working area Main spindle chuck size 6" Second spindle chuck size 6" Max. turning length 600 mm Standard machining diameter (from upper head) 600 mm Standard machining diameter (from lower head) 400 mm Bar machining capacity in main spindle 51 mm Bar machining capacity in sub-spindle 51 mm Main spindle Maximum spindle speed 6,000 rpm Minimum spindle speed 35 rpm Through-hole diameter 61 mm Motor power (40% duty) 11.0 kW Motor power (continuous) 7.5 kW Max. torque (15% duty) 184 Nm Max. torque (25% duty) 161 Nm Max. torque (40% duty) 143 Nm Maximum torque (continuous operation) 105 Nm Second spindle Maximum spindle speed 6,000 rpm Minimum spindle speed 35 rpm Through-hole diameter 61 mm Motor power (40% duty) 11.0 kW Motor power (continuous) 7.5 kW Max. torque (15% duty) 184 Nm Max. torque (40% duty) 143 Nm Maximum torque (continuous operation) 105 Nm Milling head Type Single spindle with automatic tool changer Tool holder HSK-A63 / HSK-T63 Tool size (external diameter machining) 25 mm Tool size (internal diameter machining) 40 mm Tool size (max. milling tool diameter) 130 mm Tool size (max. milling tool length) 300 mm Motor power (40% duty) 24.0 kW Motor power (continuous operation) 14.0 kW Max. torque (15% duty) 59.7 Nm Torque (40% duty) 57.3 Nm Torque (continuous operation) 46.1 Nm Max. milling spindle speed 20,000 rpm Min. milling spindle speed 35 rpm Feed axes Rapid traverse X 48 m/min Rapid traverse Z 40 m/min Rapid traverse Y 40 m/min Rapid feed rate B 44.4 m/min Rapid traverse W 30 m/min Travel X 535 mm 535 mm (+485 mm / -50 mm) Travel Z 900 mm Travel Y 210 mm B-axis travel range 240° (-30° ~ +210°) Travel W 900 mm 0850U INTEGREX I-100H S 850U MR406 Milling spindle 20,000 rpm Ncodpfoxzk Swox Adwjl SI098 Sub-spindle synchronization AS080 Overload detection system CS503 Through-spindle coolant 15 bar / flushing CS664 Preparation for extraction unit (Gx500) MB255 B-axis measuring probe (RMP60) MB650 Calibration sphere + magnetic base MB624 Smooth Set And Inspect (Multi-Tasking) CV041 Side chip conveyor (hinged belt) TE810 Preparation for Multi&Flash system NO056 Y-1 MAZAK API NO059 MTConnect adapter NO066 Smooth synchronous tapping (with milling spindle) NO072 Automatic peck drilling cycle with load monitoring NO116 Smooth 5-axis control (EIA/ISO) NO123 Tool radius compensation in 5-axis machining NO134 Simultaneous 5-axis machining on the second spindle NO442 Slope Constant (G00 motion optimization) NO482 Thread re-entry NO599 Cylindrical (G07) and polar (G12) interpolation

Condition: new, Dynamic Hard-bearing Balancing Machines of the 9D716 series have originally been designed to meet the needs of a wide range of customers. They are undoubtedly the best solution if you need to balance a wide range of rotor types, weights and sizes. This has led to their use in a wide range of industries. The machines have many unique technical solutions that allow you to set up and balance complex rotors in the shortest possible time without losing the accuracy of the unbalance detection. MACHINE HIGHLIGHTS • The specially designed rollers use advanced patented Exact Barrel grinding technology and are mounted on precision bearings. • The monolithic design of the supports and base eliminates vibration losses during balancing by reducing the number of "oscillating system" elements. • Allows large initial unbalances to be measured without destroying the machine, and rotor unbalance to be corrected directly on the machine. • The low natural resonance frequency of the supports allows the rotor to be balanced at low speeds. • The width of the support rollers and roller block allows the installation of rotors with very short rotor bearing journals. The modular design allows rotors with unusual configurations to be mounted using spacers or tools. • The height of the roller block is adjustable, allowing rotors with different journal diameters to be balanced and the rotor to be centred during machine set-up. • The unique "Micro-Tuning" technology eliminates the effects of axial slippage during rotation. • The belt drive has a patented "long stroke" design that allows any rotor to be rotated using only two drive belts. • The frequency converter drive provides smooth acceleration and deceleration of the electric motor and infinitely variable speed control of the rotor. MACHINE DESIGN OPTIONS • Axial drive that uses a cardan shaft. Capable of transmitting high torque from the electric motor to the rotor. This type of drive is used for parts with high aerodynamic resistance or special design features (e.g. augers). • Drilling module for unbalance correction of the rotor without removing it from the machine. Convenient to use to increase the productivity of the operation. • Extended machine bed. The base of the machine can be made for any length of rotor. In our practice we have had machines for rotors of 12 metres in length. MEASUREMENT AND CONTROL • We make balancing easier - the main advantage of our balancing systems. • The balancing process is displayed in real time and the unbalance behaviour of the rotor is monitored on the screen to achieve the best possible result. • The maximum sensitivity of the machine at any moment of operation, the set-up and calibration of the machine is carried out by the operator himself. • Free from the influence of external vibration factors on the measurement result, it has a high degree of protection against various types of interference. • World-leading functionality and accuracy. Ncjdpfx Aen Hwqvodwol SPECIFICATIONS Weight range of balanced rotors 5 - 500 kg Maximum rotor diameter (above the bedding) 1300 mm Diameter of rotor support journals 30 - 180 mm Distance between centres of rotor support journals 200 – 2000 mm Support type Rollers Transmission element for rotor rotation Belt / Cardan Minimum achievable residual specific unbalance 0.4 g.mm/kg Rotor speed range 300 – 1500 rpm Electric motor power 4.0 kW Parameters of the supply network 380V, 3 Ph, 50Hz

Condition: excellent (used), 5-Axis Machining Center with swivel milling head, pallet station, tool calibration, thermal compensation, work area extraction system, and much more. Year of manufacture: 2016 Spindle hours approx. 1,500 h (after spindle replacement at the beginning of 2025) Control System: - Heidenhain iTNC 530 HSCI - Heidenhain DCM Collision Monitoring - Heidenhain HR 410 electronic handwheel - Swiveling console with 19" monitor - Teleservice via LAN/WLAN Travel Range: - Travel X 1,000 mm, Y 1,100 mm, Z 810 mm - NC rotary table D 1,000 x 800 mm, swing diameter 1,350 mm Milling Head: - Automatic horizontal/vertical swivel milling head - Fully-fledged stepless NC axis from -1° to +90° - Blowing air through the spindle - External coolant supply via nozzle ring Drive power: 38 kW (100% duty cycle) Speed: 16,000 rpm Torque: 135 Nm at 40% duty cycle Spindle interface: HSK 63-A Media Supply: - Internal coolant feed: 50 bar - capacity 28 l/min - Paper belt filter with additional fine filter - Individual tool pressure regulation during program operation Tool Changer: - Rack magazine with 73 stations (expandable with additional racks) - Swiveling dialog operation panel - Drawer for loading and unloading tools from tool racks Tool Measurement: - 3D wireless touch probe m&h 20.00-Multi, software adapted for HSK 63-A Ncjdpfxjxhg Dio Adwsl - Including Kinematics-Opt, compatible with iTNC control, and calibration sphere on magnetic stand Pallet Changer: - Double palletizing unit, pallet diameter 1,000 x 800 mm, hole grid 100mm x 100mm, hardened drill bushes D 16mm - Rotary table unit including zero-point clamping system, loading station accessible by crane - Pallet changer unit protected with enclosure Special Equipment: - Micro-Epsilon sensor - For detection and dynamic compensation of thermal spindle growth Chip Conveyor: - Scraper belt conveyor along machine bed - Chip ejection height 1,100 mm Machine Enclosure: - Full-area protective enclosure with large angle door for crane loading and a quick-access door - Easy removal of swarf from the workspace Extraction System: - Oil and emulsion mist extraction, mechanical air filter, extraction capacity 1,800 m³/h Rotating View Window: - Viewing window integrated into the cabin door for workspace observation Camera in Work Area: - Monitor and keyboard at the operator console—allows monitoring of rear-side machining operations Machine Data: - Space requirement (without service area): approx. LxWxH 4,791 mm x 4,100 mm x 4,791 mm (including extraction system) - Machine weight approx. 19,700 kg - Total weight with all equipment plus maximum workpiece load, full tool magazine, and all operating materials: approx. 27,730 kg - Connected load: 50 kVA, 400V, 50/60 Hz This machining center, featuring an exceptionally good and practical configuration, is in very good condition. It operates with the renowned "Swiss precision." There is no service or repair backlog—in fact, the opposite. With an almost new milling spindle, the REIDEN RX 10 5X is well positioned for long-term use. Technical modifications and errors excepted.

Condition: new, power: 397 kW (539.77 HP), fuel type: diesel, overall weight: 28,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, You can find our complete range of vehicles with immediately and shortly available units on our website. Excerpt from the equipment list. Full specifications available on request. Fuel Tanks and Fuel Lines * 460 l fuel tank capacity, left side * 80 l AdBlue tank capacity, right side Braking System * Electronic Braking System (EBS) * Anti-lock Braking System (ABS) * Emergency Brake Assist * Eco retarder, speed-dependent, multi-stage, energy-efficient * Disc brakes on front axle * Disc brakes on leading axle * Disc brakes on rear axle Engine, Engine Cooling * MAN D2676 LFBI diesel engine, 397 kW (540 hp) output, 2,650 Nm torque * Euro 6e Transmission, Clutch * MAN TipMatic 12.28 OD, with retarder * Transmission configured for increased push force during driving operation * MAN TipMatic controls, with stalk lever, manual (DNR selection, gear strategy selection) * MAN TipMatic Efficiency driving program, up to 70,000 kg Rims, Tires * Front axle tires: Goodyear 385/55R22.5 FUELMAX S ENDURANCE steer-highway TL * Leading axle tires: Goodyear 385/55R22.5 FUELMAX S ENDURANCE steer-highway TL * Rear axle tires: Goodyear 315/70R22.5 KMAX D G2 drive-regional TL * Tire Pressure Monitoring System (TPM), with tire temperature display * Tire pressure display for trailer Axles * 6x2/4 * Front axle, 9,200 kg, non-driven, offset, steered, non-liftable * Leading axle, 8,200 kg, non-driven, straight, steered, liftable * Rear axle HY-1360, 13,000 kg, HY axle without drive, straight, non-steered, non-liftable * Digital axle load indicator (ALM) for air-suspended axles * Digital axle load indicator (ALM) for trailer/semi-trailer Axle Guidance and Suspension * Parabolic leaf spring suspension on front axle, 2-leaf, steel * Air suspension on leading axle * Air suspension on rear axle Cab and Cab Exterior * GX cab: the maximum (wide, long, extra high) * Electric glass sunroof * Side flaps with aerodynamic, reversible extensions, foldable left and right Lighting and Audible Signals on Cab Exterior (Headlights, Horn, etc.) * LED package Plus, front headlights, fog lights, cornering lights * Front headlights, LED * Daytime running lights, LED * Fog lights, LED * Cornering light, LED * Side indicator lights, LED * Headlight cleaning system * Manual headlight range adjustment * High beam assistant * Automatic headlight control, with light sensor * 2 LED position marker lights * Comfort turn signal function, activatable Ncedpfowx Ddkjx Adwjl * 2 air horns on cab roof * LED revolving beacons, yellow, with function monitoring (individual LEDs illuminate in cascade, all around) * 2 revolving beacons on cab roof, 1 right and 1 left * 2 work lights on cab roof, 1 right and 1 left Mirrors and Mirror Replacements * Mirror package, exterior mirrors, electrically adjustable, heated, front mirror, kerb mirror right Driver’s Workspace * Multifunction leather steering wheel, height and tilt adjustable * Electronically controlled MAN ComfortSteering system * Driver airbag with seatbelt tensioner * Professional instrument cluster 12.3-inch * Digital tachograph with remote communication (DSRC-compliant), CONTINENTAL tachograph/speedometer, calibrated Cabin Climate Control * Electric stationary air conditioning * Climatronic air conditioning system * Additional water heater, 4 kW Assistance Systems * Electronic Stability Program (ESP) * Traction Control System (ASR) * Adaptive cruise control with Stop and Go function

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles, consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration Nsdpoxu U Trjfx Adwjcl - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: new, F 45 ProDrive:The new F 45 is a masterpiece of technology and design. The machine stand, which has been redesigned from the ground up, exceeds all previous values in terms of torsional rigidity and low eye-level control, with which you can call up the height and tiltof the saw blade plus, depending on the control package selected, the speed andother functions.3.5" color screen with separate keyboardAutom. Automatic dimensional correction at the parallel and angle stop when swivelling the saw unitSimple calibration of the axesMachine diagnostics, operating hours counter, USB interfaceCalling up the last dimension entry (back function)99 storable cutting programsGrooving: with automatic step-by-step positioning of therip fence400V / 50Hz - Europe , scale: scale in mmM44249machine height 910 mmM64099eye-level operationbasic equipmentThe control panel of the F 45 is mounted at eye level. This means that all axes can be conveniently controlled and all settings are in -hand operation of the swing-away deviceM64096max. blade diameter 450 mmBasic equipmentThe F 45 is equipped with a parallelogram guardwith two hoods for 90° and angle cuts.{They are infinitely adjustable in large pressure roller in the infeed automatically adjusts theguard to the workpiece maximum saw blade diameter is 450 mm. This achieves a saw blade projection of max. 154 mm.M511005.5 kW (7.5 hp)optionalone-sided swivel saw unit with 5.5 kW (7.5 hp) motor,manuallyadjustable to 3/4/5000 rpm. Swivel range: 0 - 46°AKE quick-change system for the main saw bladeThe motors have 20% more torque than standard electric motors with the samepower consumption.M24038Preparation for 2-axis scoring unitOptionScoring unit preparationfor retrofitting a scoring unitM41010Table top extension 840 mmBasic equipmentTable top extension 840 mmconsisting of a CDF panel with HPL coating on both sides. Itis particularly scratch and impact resistant.M34204Double castor trolley with trolley length 3200 mmOptionDouble castor trolley, trolley length 3200 mmThe Altendorf double castor trolley can be locked in any position. Thedouble castors, made of hardened steel, holdthe upper carriage in conjunction with the lower carriage absolutely precisely in thehard chrome-plated guide rods. The carriage construction is designed as an extremely torsion-resistant and dimensionally stable multi-hollow chamber system. The table surface is anodized.A hard chrome-plated round bar serves as a mount for the cross slide and as an interface for various accessories.M44404Angle mitre fenceOptionAngle mitre fence, cutting to length up to 3500 mmThis Altendorf-patented fence with integratedlength compensation facilitates the precise cutting of 90° angles andmitres in one function. In the front and rearstop position, the swivel angle is infinitely adjustable by 49° andis indicated by a measuring scale. Simply move the fence ruler to theselected angle dimension according to the scale and then set the desired lengthon the fence cut-to-length dimensions from approx. 1700 mm, theroller-supported and stable telescopic extension takes over the outer fence entire cross slide is supported by a precision-manufactured,prismatic support of the round bar of thedouble roller carriageIncluding: two single tilt stopsM44441CNC parallel fence 1000 mmOptionCNC parallel fence, cutting width 1000 mmThe CNC-controlled parallel fence can be controlled at a traversing speedo... Nsdpfjvzhdzjx Adwecl

Condition: excellent (used), Year of construction: 2015, operating hours: 14,094 h, functionality: fully functional, machine/vehicle number: UT 0609, travel distance X-axis: 1,520 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 24, No reserve price - guaranteed sale at the highest bid! Submitting a bid obliges you to pick up the item on time by March 31, 2025! 5-axis universal machining center with integrated 2-axis CNC rotary/tilting table TECHNICAL DETAILS Machine type Control: Heidenhain TNC 620 Travel path X: 1,520 mm Travel path Y: 520 mm Travel path Z: 460 mm Rapid traverse: 48 m/min Table Turning diameter: Ø 650 mm (removable to 500 mm) Table load: max. 500 kg Swivel range: -5° to +110° Milling spindle Speed: up to 12,000 rpm Drive power: 19 kW Torque: 121 Nm (10% duty cycle) Tool change Capacity: 24 tools (double arm changer) Tool size: ISO 40 according to DIN 69871A MACHINE DETAILS Control switch-on time: 31,943 h Machine switch-on time: 23,443 h Spindle running time: 14,094 h Coolant Tank capacity: 200 liters Centrifugal pump: 83 l/min at 8 bar EQUIPMENT - Additional rigid table on the left in the work area Njdpov Iazxjfx Adwjcl - Full splash guard cover - Work area light - Hydraulic and heat compensation - Direct measuring systems for all axes - Preparation for high-pressure flushing - Chip conveyor - Manuals on CD-ROM - Laser probe U-series - Calibration burr with SK 40 tool holder - Preparation interface for Blum infrared measuring probe - Workpiece measuring probe for milling machine - SK40 pull stud - Software additional equipment: Touch system function Automatic kinematic measurement using touch system cycles Swivelling of the processing level and reundtuisch processing

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25653, Equipped with: -Automatic Central Lubrication System -Machine Guard -Indramat - MTX and Sercos CNC Control -The standard machine is equipped with CNC-control make Indramat - MTX and SERCOS-interface -Tool Dressing (Automatic dressing cycle of the dressing master and honing wheel tip diameter by a diamond coated dressing roll. The dressing cycle of workpieces can be pre-selected) -Electronic Indexing Unit -Operator and Maintenance Manual -All Electrical Drawings -PLC Language in English -Software and Hardware for Remote Diagnosis -High Precision Control of the Stock Allowance Material -Manual Loading on Spindle for Prototypes -Software for Infeed Optimized Cycle Type Reduction (Adaptive Honing) -Software for Vario Speed Dressing -Software for Calibration of Master Gears -Software for Timing Gears (including additional sensor for the hole of 4mm) -Software for Shortening of Workpiece Change-Over Time -Clamping Cylinder -RITTAL Cooling Unit -Lighting for Working Area -Installation of Vibration Detecting Sensors -Coolant Unit -Electrostatic Oil Mist Exhauster IFS With Rigid Piping -Internal Automation -Pallet Ring Conveyor System FlexLink (L-form shape see approved layout) -Parallel - Double Gripper -Pick and Placer Between Pallet Conveyor and Internal Loader -Extended Loading Length of the Pick and Placer Specifications: Workpiece: -Part Diameter: 20-150 mm -Maximum Face Width: 70 mm -Part Weight: 20 kg -Number of Teeth: 6-150 -Module: 1-5 mm Workpiece Spindle: -Maximum Speed: 6000 1/min -Installed Power: Approx. 25 kW Tool: -OD of Honing Wheel: 270 mm -Widths of Honing Wheel: 20-70 mm -Honing Wheel Material: Ceramics Tool Spindle: -Maximum Speed: 2000 1/min -Installed Power: Approx. 25 kW Machine: -Total Connected Load, Approx: 70 kVA -Floor Space (w x l x H): -Total Weight, Approx: 11 Ton -Bosch Rexroth MTX Control CML 85 Longitudinal Slide, Z-Axis: -Linear Drive -Drive Torque: 3,700 Nm -Infeed Speed: 60 m/min -Theoretical Infeed: 200 m/min -Drive Length, Maximum: 400 mm Nodpfx Ajw Iquyedwscl Cross Slide, X-Axis: -Linear Drive -Drive Momentum: 2,150 Nm -Infeed Speed: 60 m/min -Theoretical Infeed: 200 m/min -Drive Length, Maximum: 1050 mm Swiveling Axis, W-Axis: -AC-Servo Drive: 10,000 1/min -Setable Gear Transmission: i=5000:1 -Swiveling Angle: -90 Degrees / +16 Degrees Workpiece Spindle, C-Axis: -Direct Drive, Maximum RPM: 7,000 1/min -Drive Power: 30 kW -Drive Torque: 112 Nm -Digital Measuring System Tool Spindle, B-Axis: -Direct Drive (hollow spindle drive), Maximum RPM: 2000 1/min -Drive Power: 30 kW -Drive Torque: 150 Nm -Digital Measuring System

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 1104104, measuring range X-axis: 1,205 mm, measuring range Y-axis: 2,005 mm, measuring range Z-axis: 1,005 mm, workpiece weight (max.): 2,000 kg, workpiece height (max.): 1,115 mm, The measuring table has been supplemented with milled aluminum plates. These plates are equipped with M6 holes in a 50 mm grid pattern, allowing for variable clamping options for workpieces. TECHNICAL DETAILS Measuring range X-axis: 1,205 mm Measuring range Y-axis: 2,005 mm Measuring range Z-axis: 1,005 mm Drive speed in CNC mode Traversing speed: 8–250 mm/s Measuring speed: 1–3 mm/s Drive speed in J/S mode High speed: 0–80 mm/s Low speed: 0–3 mm/s Fine speed: 0.05 mm/s Acceleration Acceleration per axis: 0.1 G Max. acceleration: 0.17 G Resolution: 0.0001 mm Measuring table Material: Granite Working area: 1,408 mm x 2,980 mm Clamping threads: M8 x 1.25 Max. workpiece height: 1,115 mm Max. workpiece weight: 2,000 kg MACHINE DETAILS Dimensions & Weight Main unit dimensions (D x W x H): 3,230 x 2,150 x 3,585 mm Weight (incl. stand and control unit): 5,388 kg Compressed air supply Air pressure: 0.4 MPa Air consumption in normal operation: 100 L/min Air consumption from air source: 150 L/min Temperature conditions Ambient temperature: 16–26 °C Thermal fluctuation per hour: 2.0 K Thermal fluctuation per day: 5.0 K Thermal gradient vertical: 1.0 K/m Thermal gradient horizontal: 1.0 K/m Accuracy Accuracy to ISO 10360-2: E = 4.9 + 5L/1,000 Probing error Probing error ISO 10360-2 (TP2): R = 5.2 µm Probing error ISO 10360-2 (TP200): R = 5.0 µm EQUIPMENT Geopack Cosmos 2.3 software PH 10 probe head TP 200 Ncsdpfsx U Sv Hex Adwol Change rack Note: The machine was in operation until 2013, after which it was professionally dismantled by the manufacturer. The machine was then stored in an industrial hall. The last factory calibration was carried out in 2013. The calibration certificate is available as an attachment in the listing.