Used Portal Milling for sale (10,530)

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 1,10,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Njdpfx Asyahv Sodvjcp Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Year of construction: 2018, condition: ready for operation (used), - USED - 5-AXIS BRIDGE-TYPE CNC MILLING MACHINE LONGITUDINAL TRAVEL: 2500 mm TRANSVERSAL TRAVEL: 3500 mm VERTICAL TRAVEL: 1300 mm RAPID FEEDS L-T-V: 40 m/min TABLE SIZE: 3500 x 2500 mm Njdpfxowla Hno Advscp HEAD: A/B AXIS AUTOMATIC ; A-axis ±185° - B-axis ±270° ; HSK A100 ; 12000 rpm TOOL MAGAZINE: CHAIN-TYPE ; 64 POS CONTROL UNIT: HEIDENHAIN TNC640 WEIGHT: 51370 Kg ACCESSORIES: HIGH PRESSURE COOLANT ; SWARF CONVEYOR ; PAPER FILTER ; LASER TOOL SETTER ; TOUCH PROBE ; PORTABLE HANDWHEEL

Condition: like new (used), Year of construction: 2020, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: 5645, travel distance X-axis: 6,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,600 mm, feed rate X-axis: 25,000 m/min, feed rate Y-axis: 25,000 m/min, feed rate Z-axis: 25,000 m/min, total length: 6,550 mm, table length: 2,500 mm, table width: 2,500 mm, total width: 15,900 mm, spindle speed (max.): 4,000 rpm, total height: 11,500 mm, overall weight: 57,000 kg, working range: 2,500 mm, grinding spindle motor power: 46,000 W, Ladies and Gentlemen, Enclosed we advertise our portal bed milling machine. Installation winter 2019/2020. 12,000 operating hours. Price on request. The machine is currently still in operation. The price is for the machine only. Dismantling, transportation and installation are the responsibility of the buyer. We are looking forward to serious inquiries. Many thanks in advance. Njdpfx Aettri Tedvjcp

Condition: new, Year of construction: 2025, Ref. -No.: 10464 Manufacturer: IGREK Type: 3500 XXL Year of construction: 2025 Type of control: CNC Control: Siemens 840 D / Heidenhain iTNC 640 Storage location: Istanbul Country of origin: Türkiye X-Travel: 10500 mm Y-Travel: 3500 mm Z-Travel: 1400 mm A-Axis: +/- 115 ° B-Axis: 360 ° Max. Torque: 235 Nm Rapid Traverse X/Y/Z: 30 m / min Drive power spindle: 54 kW Table load max.: 4000 kg Tool Taper: HSK-A100 Spindle Speeds: 12500 RPM Machine length: 16000 mm Machine width: 7400 mm Machine Height: 8500 mm Weight: 195 t Ncedpfx Adjxc Tr Aovep Further information: GREK 3500 XXL – Customized precision for large-scale projects The IGREK 3500 XXL is a CNC 5-axis portal milling machine of the latest generation, developed for the high-precision machining of large components. Built in 2024, it is ready for immediate use and equipped with the latest technology to meet the most demanding requirements in heavy industry and mechanical engineering. Key features: Gigantic machining areas: With travel distances of 10,500 mm (X), 3,500 mm (Y) and 1,400 mm (Z), the machine offers extraordinary flexibility for machining large parts. 5-axis simultaneous machining: The A-axis with +/- 115° and the B-axis with 360° guarantee maximum precision and versatility when machining complex workpieces. Powerful spindle: Equipped with a speed of up to 12,500 rpm, a maximum torque of 235 Nm and a drive power of 54 kW – ideal for high-performance machining. Robust and durable: Weighing 195 tons and with a table load of up to 4,000 kg, the machine is designed for heavy-duty machining. Innovative tool holding fixture: The HSK-A100 tool holding fixture enables quick tool changes and increases efficiency. Speed and efficiency: Rapid feed rates of 30 m/min on all axes ensure maximum productivity. Technical data at a glance: Traverse paths: X 10,500 mm / Y 3,500 mm / Z 1,400 mm Spindle power: 54 kW Spindle speed: 12,500 rpm Table load: up to 4,000 kg Machine dimensions (LxWxH): 16,000 x 7,400 x 8,500 mm Weight: 195 tons Additional benefits: The machine is supplied with the advanced Siemens 840D or Heidenhain iTNC 640 control system and offers worldwide warranty and service support from the manufacturer. Choose the IGREK 3500 XXL for precision and efficiency in the machining of large parts. Contact us now for a non-binding offer!

Condition: ready for operation (used), - USED - BRIDGE-TYPE MILLING MACHINE WITH MOBILE TABLE AND MOBILE CROSS BEAM LONGITUDINAL TRAVEL: 9000 mm TRANSVERSAL TRAVEL: 2950 mm VERTICAL TRAVEL: 1250+2200 mm RAPID FEEDS L-T-V: 3 - 3 - 2 m/min Nodpfxjyru Ncs Advecp TABLE SIZE: 2800 x 8000 (5000+3000) mm MAX ADMITTED LOAD: 64000 Kg SPINDLE: 20 - 600 rpm; 100 kW; 13000 Nm; ISO 60 DISTANCE BETWEEN UPRIGHTS: 3200 mm DISTANCE SPINDLE NOSE-TABLE: 2806 mm OVERALL DIMENSIONS: 21000 x 7800 x 6650 mm ACCESSORIES: GEAR BOX NOTE: No 1 90° HEAD; No 1 REDUCED 90° HEAD; No 1 VERTICAL EXTENSION; No1 TILTING HEAD; 3-STEPS GEAR BOX

Condition: new, Portal machine - the space miracle! Nedpfx Ashqhlvjdvocp CNC portal milling machine for large traverse paths with small space requirements! ADVANTAGES: -optimized space utilization, completely free table clamping area -best possible chip protection due to overhead axes -particularly suitable for high and bulky components -PILZ safety technology -Windows 10 APPLICATIONS: -chipping -measuring and testing -dosing applications FOR MACHINING: -Aluminum / light metals -Milled plastics -Ceramics -Non-ferrous metals (brass, bronze, etc...) -Plastics -Wood Maximum functionality with minimum space requirements is the motto of the OverHead Gantry M. The basic machine can be optimally configured for many sectors and work areas using a variety of variable equipment features and additional options. The possible applications of the OverHead Gantry M include measuring, testing and metering applications in addition to machining. The power of the milling motor of up to 2.2 kW and 20,000 rpm and a traverse speed up to 250 mm/sec make it suitable for processing wood and plastic as well as light and non-ferrous metals. The free processing area and its excellent price/performance ratio off er decisive benefits compared to similar products. The OverHead® Gantry M is available in five different sizes for different process areas from M20 to M50. Do you require the control cabinet on the right-hand side or would you prefer the control panel to be on the left? No problem – we will be happy to accommodate your requirements. And of course we will take care of maintenance and support for your OverHead® Gantry M. Our service technicians can be reached by telephone and can attend to you quickly on-site as needed. In addition, we also off er our in-house isy-CAM 2.8 software and can advise you on your specific application. BENEFITS: -Optimal use of space -Free machining area -Fixed table, mobil portal -Variable clearance of 340- 590 mm -Also suitable for a large chip volumes SET UP: Portal: mobil, Table: Fixed

Condition: good (used), Machine is in good working condition. Parts shown by hand not come. Ncedpfoylxg Ejx Advjp

Condition: new, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,000 mm, table length: 3,000 mm, table width: 1,700 mm, spindle speed (max.): 6,000 rpm, rapid traverse X-axis: 24,000 m/min, rapid traverse Y-axis: 24,000 m/min, rapid traverse Z-axis: 24,000 m/min, table load: 10,000 kg, position of the milling head: Vertikal, workpiece weight (max.): 10,000 kg, torque: 1,392 Nm, overall weight: 30,000 kg, spindle nose: SK 50 - DIN 69871/A, spindle motor power: 53 W, Equipment: rotational speed infinitely variable, Brand new gantry milling machine Control and motors: HEIDENHAIN TNC 640 digital path control HEIDENHAIN TFT 19" screen HEIDENHAIN package: motors, measuring systems, handwheel IKZ: Internal coolant supply, 70 bar Additional equipment: 60-position chain-type tool changer with double gripper Nsdpfx Adehy Avpevocp Double auger conveyor (longitudinal) Hinged belt chip conveyor (transverse) Preparation for 4th axis (rotary table) Fully enclosed, top closed Accuracies: Positioning accuracy: ±0.035 mm Repeatability: ±0.028 mm Only inquiries from Germany will be answered // Nur Anfragen aus Deutschland werden bearbeitet

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 800 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, table length: 1,900 mm, table width: 1,100 mm, spindle speed (max.): 6,000 rpm, table load: 4,000 kg, position of the milling head: Vertikal, torque: 1,356 Nm, spindle nose: SK 50 - DIN 69871A, Equipment: rotational speed infinitely variable, BRAND NEW GANTRY MILLING MACHINE Control and Motors: HEIDENHAIN TNC 640 digital path control HEIDENHAIN 19" TFT display HEIDENHAIN motors, measurement systems and HR 510 electronic handwheel Spindle Power: Maximum spindle motor power: 30 kW ICS: Internal coolant supply, 70 bar Additional Equipment: Nsdjq Ixc Topfx Advjcp Tool changer with double gripper, 60 positions Dual auger (longitudinal) Hinged belt chip conveyor (transverse) Preparation for 4th axis (rotary table) Fully enclosed, top closed Accuracies: Positioning accuracy: ± 0.025 mm Repeatability: ± 0.020 mm Only inquiries from Germany will receive a response.

Condition: new, travel distance X-axis: 6,200 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 1,200 mm, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 15,000 m/min, table length: 6,000 mm, table width: 2,400 mm, spindle speed (max.): 6,000 rpm, table load: 19,000 kg, position of the milling head: vertikal, torque: 1,350 Nm, spindle nose: SK 50, spindle motor power: 53 W, warranty duration: 12 months, Equipment: rotational speed infinitely variable, Control and Motors: HEIDENHAIN TNC 640 digital contouring control HEIDENHAIN package (motors, measuring systems, handwheel) Nsdpjhy Avtefx Advscp IKZ: Internal coolant supply, 70 bar Additional equipment: Carousel tool changer with double gripper, 60 positions Double screw conveyor (longitudinal) Hinged belt chip conveyor (crosswise) Preparation for 4th axis (rotary table) Fully enclosed, closed at the top Accuracies: Positioning accuracy: 0.045 mm Repeatability: 0.030 mm Only inquiries from Germany will be answered

Condition: like new (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,400 mm, table length: 2,800 mm, table width: 3,100 mm, spindle speed (max.): 20,000 rpm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, workpiece weight (max.): 52,000 kg, spindle nose: HSK 63A, controller manufacturer: Heidenhain, controller model: 640, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-Axis Gantry Milling Machine PARPAS Model DIAMOND LINEAR 30 Numerical control Heidenhain 640 Cross travel (X): 2,600 mm Longitudinal travel (Y): 3,000 mm Vertical travel (Z): 1,400 mm Feed rates: 60,000 mm/min Continuous orthogonal head (TOE29T) C axis: +/- 370° A axis: +/- 110° Tool holder: HSK-63A Spindle speed: 20,000 rpm Spindle power: 37 kW Table: 3,100 x 2,800 mm Load capacity: 6 t/m² Tool magazine: 60 positions Equipped with: - 2 chip conveyors - HR550FS handwheel Ncedjwzv Umspfx Advsp USED MACHINE YEAR 2021

Condition: used, Year of construction: 1998, Portal Milling Machine JOBS JOMACH 241 Year of construction: 1998 Travel X: 3400 mm Travel Y: 2700 mm Travel Z: 1250 mm Numerical Command: CNC Siemens SINUMERIC 840 D Table size: 3000 x 1500 mm Distance between uprights: 1700 mm Nodpfxoyrcyio Advjcp 1 Tool Changer 32 Tools ISO 50 + 1 Tool Changer 32 Tools HSK-63 3 Milling heads - Axe C: 2 heads TWIST - ISO 50 + HSK 63 A + 1 head 3 axes ISO 50 Weight: 44 T

Condition: excellent (used), Year of construction: 1999, travel distance X-axis: 1,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, total length: 5,179 mm, table length: 1,800 mm, table width: 650 mm, total width: 3,345 mm, rapid traverse X-axis: 28,000 m/min, rapid traverse Y-axis: 28,000 m/min, rapid traverse Z-axis: 28,000 m/min, table load: 1,500 kg, overall weight: 7,500 kg, X - Travel: 1500mm Y - Travel: 800mm Z - Travel: 500mm Table Length: 1800mm Table Width: 650mm Table load: 1500 Feed rate X-Axis: 28000mm/min. Feed rate Y-Axis: 28000mm/min. Feed rate Z-Axis: 28000mm/min. Spindle Taper: 40ISO/Bt/Mk Nsdeyhph Espfx Advocp Power on spindle: 13.5kW Speeds / ranges: 8000Rpm ATC / revolver: 24 Coolant through spindle / Bar:10 Number of controlled axis: 3 Chip conveyor: yes Coolantsystem: yes Length: 5179mm Width: 3345mm Height: 2595mm Weight: 7500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2024, operating hours: 50 h, machine/vehicle number: 305, Available: February 2023 Control: Osai X-axis: approx. 3,100 mm Y-axis: approx. 2,100 mm Z-axis: approx. 1,000 mm A-axis: ± 115° C-axis: ± 360° Clamping table Ncedpjwwq Hcjfx Advep Clamping surface: approx. 3,100 x 2,100 x 213 mm Aluminum with T-slots across every 250 mm Max load: 1000kg distributed over the entire surface 2-axis milling head ST7 Spindle power: 10 kW Spindle speed: max. 24,000 min-1 Torque: 15.3 Nm Tool holder: HSK 63F Tool clamping: pneumatic Blowing air / MMS: outside Drives linear axes Feed speed X and Y axes: up to 50 m/min Z-axis feed rate: up to 30 m/min Color Housing, portal, control cabinet: light gray Z-slider and milling head: orange Additional equipment - 15-way tool changer - Control in a separate, rollable desk

Condition: new, Year of construction: 2025, machine/vehicle number: 306, First commissioning: 2024 Control: Heidenhain TNC 640 including handwheel HR 520 X-axis: approx. 4,000 mm Y-axis: approx. 2,700 mm Z-axis: approx. 1,300 mm A-axis: ± 120° C-axis: ± 360° Clamping table Clamping surface: approx. 4,000 x 2,500 x 213 mm Aluminum with T-slots across every 250mm Nodovy Dugepfx Advecp Max load: 1000kg distributed over the entire surface 2-axis milling head HS673 Spindle power: 22 kW Spindle speed: max. 24,000 min-1 Torque: 18 Nm Tool holder: HSK 63A Tool clamping: pneumatic Blowing air / MMS: outside Linear axis drives Feed rate X and Y axis: up to 60 m/min Feed rate Z axis: up to 40 m/min Color Housing, portal, control cabinet: light gray Z slider and milling head: orange Additional equipment - Work area cover - 16-way tool changer - Control in a separate, rollable desk Optional for an additional charge: - Blum laser tool measurement - Renishaw RMP60 radio probe - Heidenhain remote diagnosis Images show identical machine with slightly different equipment!

Condition: excellent (used), Year of construction: 2012, First commissioned: 2012 Control: Heidenhain iTNC 530 including handwheel HR 420 X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,500 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 5,700 x 3,000 x 300 mm 2-axis milling head VH20 Spindle power: 40 kW Spindle speed: max. 25,000 min-1 Torque: 48 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Blowing air: external Drives linear axes Feed rate X, Y axis: up to 50 m/min Feed speed Z-axis: up to 30 m/min Axis acceleration X-, Y-, Z-axis: up to 2.5 m/s2 Connection data Connection power: 190 kVa Back-up fuse: approx. 315 A Dimensions, weights Space requirement machine with peripherals: approx. 10,000 x 7,700 x 5,850 mm Total weight: approx. 63,000 kg Color Housing, portal, control cabinet: RAL 7035 light gray Milling head and applications: RAL 6038 bright green Additional equipment - Coolant supply with belt filter system Nodpfxsvy A Tno Advjcp - 30-way chain tool changer - Work area cover - Chip conveyor, right side Optional for an additional charge: - BLUM laser Condition of the machine Fully functional, very good condition. Already dismantled and stored.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Initial commissioning: 2000 Ncjdpsw Rl S Sefx Advop Control system: Heidenhain TNC 430 M Machine hours: 111,500 h X-axis: approx. 4,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,250 mm A-axis: ±110° C-axis: ±300° Clamping table Clamping surface: approx. 6,000 x 2,000 x 420 mm T-slot spacing: 18H12 / 250 mm Max. table load: 30,000 kg/m² 2-axis milling head AC3 Spindle power: 25 kW Spindle speed: max. 15,000 rpm Torque: 80 Nm Tool holder: HSK 63A Tool clamping: hydraulic Spindle freshly overhauled at the end of 2024! Linear axis drives Feed rate X, Y axis: up to 20 m/min Feed rate Z axis: up to 20 m/min Axis acceleration X, Y, Z: up to 1.5 m/s² Connection data Connected load: 40 kW Main fuse: approx. 80 A Dimensions & weights Machine footprint with peripherals: approx. 8,500 x 5,600 x 4,945 mm Total weight: approx. 18,000 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: green Additional equipment - 3-sided enclosure, without extraction ducts - The additional clamping table shown is not included in the scope of supply Condition of the machine Fully functional, in very good condition. Machine remains connected and is available immediately.

Condition: excellent (used), Year of construction: 2014, First commissioning: 2014 Control: Heidenhain iTNC 530 HSCI including HR 520 handwheel Machine hours Power-on hours: approx. 90,000 h Spindle hours: approx. 38,000 h Current milling spindle hours: approx. 900 h Travel distances X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Nodpewywciefx Advocp Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 600 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Linear axis drives Feed speed X/Y/Z-axis: up to 60 m/min Axis acceleration X/Y/Z-axis: up to 5 m/s² Electrical specifications Connected load: 190 kVA Main fuse: approx. 315 A Dimensions, weights Space requirement (machine with peripherals): approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Colour Enclosure, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Description: Additional equipment - Coolant supply with belt filter system - 50-position chain-type tool changer - Work area enclosure - Chip conveyor - Emulsion mist extraction system from LTA Optional at extra cost: - Renishaw RMP60 wireless measuring probe - BLUM Control NT Condition of the machine Fully functional, in excellent condition and available for inspection under power! Images are sample photos from a new machine of this type. Original images to follow shortly!

Condition: excellent (used), Year of construction: 2008, operating hours: 82,500 h, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,750 mm, feed rate X-axis: 65 m/min, feed rate Y-axis: 65 m/min, feed rate Z-axis: 65 m/min, spindle speed (max.): 20,000 rpm, rapid traverse X-axis: 65 m/min, rapid traverse Y-axis: 65 m/min, rapid traverse Z-axis: 65 m/min, torque: 63 Nm, overall weight: 90,000 kg, Equipment: rotational speed infinitely variable, First commissioning: 2008 Control system: Heidenhain iTNC 530 incl. HR420 handwheel X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Nedpfx Aoxl R Hvjdvecp Z-axis: approx. 1,750 mm A-axis: -120 / +95° C-axis: ±360° Maximum workpiece dimensions 3,800 mm (X-direction) 1,800 mm (Y-direction) 1,150 mm (Z-direction) 5-axis machining is possible in a single setup with a 300 mm long tool (A-axis at 90° swivel). Machine operating hours: approx. 82,500 h Total spindle hours: approx. 36,500 h Clamping table No machine table is included in the delivery. However, we are happy to offer a customer-specific solution at extra cost. 2-axis fork-type milling head 5 Spindle power: 20 kW Spindle speed: max. 20,000 rpm Torque: max. 63 Nm Tool holder: HSK 63A Tool release: hydraulic Holding torque (clamped) A & C axis: 2,000 Nm Drives, linear axes Feed rate X, Y, and Z axis: up to 65 m/min Axis acceleration X, Y, and Z: up to 5 m/s² Connection data Voltage: 400 V Frequency: 50 Hz Power requirement: 130 kW Dimensions, weight Space required machine without peripherals: approx. 7,500 x 8,500 x 6,600 mm Total weight: approx. 90,000 kg Colour Enclosure, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 5002 aquamarine blue Additional equipment - Minimum quantity lubrication - 50-fold tool changer - Work area enclosure Optionally available at extra cost: - Renishaw RMP60 probe - BLUM LaserControl NT mini Condition of the machine Fully functional, in very good condition. Can be inspected under power until April 2026.

Condition: used, Year of construction: 2014, X-travel: 1250mm, y-travel: 1280mm, z-travel: 150mm, max. feed rate: 15m/min, repeat accuracy: 0.01mm, spindle rotational speed: 0-24,000/min, software: VCarve Pro, data formats: HPGL-3D / G-Code, spindle power: 6.5kW, controls: Siemens Sinumerik 808D Milling, weight: 1.2t, with collet spindle, Phenol vacuum high-pressure table, 850W servo motors Yaskawa, steel base, precision ball screws in all axes, x-axis with dual drive, linear guides, protective cover for all drive axes, suction foot for chip extraction, automatic spray cooling and material sensor. Ncjdpfx Adewqd Rhsvsp

Year of construction: 1999, condition: ready for operation (used), A walk-in CNC 5-axis large-format portal milling machine Fooke is available. Travel X/Y/Z: 3000mm/2500mm/1150mm, bridge height: 800mm, table dimensions X/Y: 3000mm/2500mm, spindle power: 28kW, spindle speed: 16000rpm, swivel range A: +/-100°, rotary range C: +/-181.5°, feed rate: 15m/min, rapid traverse X/Y: 20m/min, rapid traverse Z: 10m/min, rotary speed A/C: 8rpm, tool holder: HSK-63A. Machine dimensions X/Y/Z: approx. 6000mm/6000mm/5200mm, weight: approx. 50000kg, control: Siemens 840D powerline. Documentation available. On-site inspection is possible. Ncjdpfx Adsygmc Dsvsp

Condition: good (used), Year of construction: 1995, operating hours: 43,499 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,000 mm, 5-Axis Gantry Milling Machine WALDRICH Product manufactured on the machine: AIRBUS LANDING GEAR (aerospace) Year of construction: 1995; Delivery year: 1998 Installation & Commissioning: 1999 Operating period: 03/1999 to 07/2022 (21 years) Condition: Very Good Customer Specifications / History Previous owner (1999–2022): German aerospace group Technical Specifications Travel Distances & Working Area X-axis (longitudinal table travel): 4,000 mm Y-axis (cross-slide traverse): 2,500 mm Z-axis (vertical ram travel): 1,000 mm Clearance between columns: 2,000 mm C-axis: 360,000 positions (increment 0.001°) B-axis: 360,000 positions Tables & Pallets Number of tables: 2 Table dimensions: 1,500 x 3,000 mm Table height above floor: 740 mm Max. table load: 12,000 kg Feed & Rapid Traverses X/Y/Z: Feed 0–6,000 mm/min, rapid traverse 15,000 mm/min B-axis nutator: 0–3,600 deg/min C-axis nutator: 0–3,600 deg/min Feed Forces / Torque X/Y/Z max.: 30 kN each C-axis detachable torque: max. 20,000 Nm C-axis bearing control: max. 4,000 Nm Speed range Stage I: 20–875 rpm Stage II: 876–4,000 rpm Spindle Drive Power: 50 kW Speed range: 20–4,000 rpm Tool Change System Type: Chain magazine Capacity: 120 tools Tool holder: ISO 50 Max. tool diameter: 315 mm Tool diameter at full occupancy: 100 mm Max. tool length: 550 mm Max. tool weight per gripper: 35 kg Spindle Units / Distances Vertical spindle unit: Spindle nose – table surface 250–1,250 mm Horizontal spindle unit: Spindle center – table surface 150–1,150 mm Nutator (MC303): Spindle center – table surface 45–1,045 mm Coolant & Lubrication Coolant supply: internal and external available Lubrication: automatic (spindle bearings and gearbox) Dimensions & Weight Machine dimensions (approx.): Length: 14,700 mm Nedpfx Aox Hxdzodvecp Width: 10,000 mm Height above floor: 6,079 mm Total machine weight (approx.): 72,500 kg Machine bed: 8,500 kg Machine table & pallet: 16,000 kg 2 columns: 10,200 kg Crossbeam with platform: 20,000 kg Special Features & Accessories Fully automatic tool changer (ATC): 120 stations (ISO 50) Fully automatic head changer incl. universal milling heads Milling head: C-axis: 360,000 x 0.001° B-axis: 360,000° Accessories: 3 chip conveyors Toolbox + pallets with loose accessories Packing List (Transport Dimensions) Axes: 8,950 x 1,700 x H 1,000 mm 2 tables: 3,300 x 1,700 x H 340 mm Tool changer with carriage: 3,500 x 2,300 x H 2,670 mm Tool changer without carriage: 4,450 x 1,060 x H 1,870 mm Pick-up heads: 3,000 x 470 x H 2,200 mm Crossbeam: 7,000 x 2,000 x H 2,500 mm 2 support columns: 2,900 x 1,000 x H 1,500 mm Carriage with RAM: 3,450 x 1,800 x H 2,100 mm Chain section: 3,700 x 2,000 x H 1,100 mm Electrical cabinet No. 1: 5,400 x 600 x H 2,000 mm Electrical cabinet No. 2: 2,100 x 650 x H 2,000 mm Chip conveyor: 5,000 x 500 x H 2,300 mm Head: 900 x 600 x H 700 mm Tool case: 2,100 x 1,200 x H 600 mm 7 pallets with loose accessories This WALDRICH SIEGEN 5-axis portal milling machine is ideally suited for machining steel, cast iron and non-ferrous metals. The combination of a 50 kW spindle drive, automatic tool changer (120 stations), fully automatic head changer, and high-precision B/C axis positioning (0.001°) makes it the ideal solution for demanding and complex manufacturing tasks.

Condition: used, Year of construction: 1987, functionality: fully functional, Angle milling head - Manufacturer: Waldrich Siegen - Model: ET500 Ncodorfw R Hepfx Advsp - Order no.: 11290/731

Condition: excellent (used), Year of construction: 2018, operating hours: 19,394 h, functionality: fully functional, machine/vehicle number: 2522027, travel distance X-axis: 2,500 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 1,250 mm, total length: 5,900 mm, table length: 2,500 mm, table width: 2,500 mm, total width: 6,139 mm, total height: 5,980 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 50 m/min, distance between stands: 3,225 mm, table load: 4,000 kg, workpiece weight (max.): 16,000 kg, rotational speed (min.): 1 rpm, rotational speed (max.): 15,000 rpm, distance table center to spindle nose: 1,500 mm, tool weight: 8,000 g, Equipment: rotational speed infinitely variable, Control: Heidenhain TNC640 Number of controlled axes: 5; simultaneous Commissioned: 2019 Spindle run time (h): 12,629 Tool holder: HSK 100 Tool changer: 30 positions Linear motor Njdpfx Ajxx Svxedvecp Internal coolant supply (IKZ): 65 bar incl. chip conveyor incl. special operator panel

Condition: good (used), Year of construction: 2004, travel distance X-axis: 1,750 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 600 mm, CNC portal milling machine FPT - STINGER MACH-ID 8829 Manufacturer: FPT Type: STINGER Control: HeidenHain iTNC530 Year of manufacture: 2004 Chip conveyor Laser tool setter Portal Handwheel Full A/B-Automatic head High pressure coolant Specifications Ncsdpfx Adeuni D Eovop Metric US Standard X - axis 1750 mm Y - axis 1400 mm Z - axis 600 mm Table length 1200 mm Table width 1000 mm Table load 5000 Feed X - axis 35000 mm/min. Y-axis feed 35000 mm/min. Feed Z-axis 35000 mm/min. Tool holder HSK 63 ISO/Bt/Mk Spindle power 25 kW spindle speed 18000 rpm Tool changer 30 IKZ 20 Number of controlled axes 5 Chip conveyor Yes Cooling device Yes Dimensions (estimate) length 6000 mm width 4000 mm height 3850 mm weight 21000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.