Used Tos Galanta Suil 40 A for sale (61,435)

Condition: used, mileage: 2,75,080 km, power: 290 kW (394.29 HP), first registration: 05/2017, fuel type: diesel, empty load weight: 13,725 kg, maximum load weight: 12,275 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,900 mm, next inspection (TÜV): 01/2025, brakes: engine braking, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, loading space length: 6,510 mm, loading space width: 2,490 mm, loading space height: 950 mm, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, crane, cruise control, differential lock, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, ClassicSpace, Active Brake Assist, Mercedes PowerShift 3, optional house, 1x comfort seat, heated seats, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, cruise control, ABS (anti-lock braking system), traction control (ASR), constant throttle, power take-off, differential lock, work lights, air suspension, air+light trailer hitch, aluminum tank, last axle hydr. steered, lashing eyes, U-protection, lateral aluminum driving protection, pendulum flaps, roof hatch, crane at the rear, emergency stop, grab control, high seat, 2-point hydraulic outriggers, 3x hydr, 3x hydr. extensions, green environmental sticker Wheelbase: 4900 mm Body: Platform body with aluminum side walls & rear crane HMF 2110-L3 with high seat Front axle air-sprung, 8t front axle, rear axle disc wheel 440 hypoid 13t, 7.5t trailing axle steered/relievable, electronic brake system with ABS and ASR, disc brakes on VA and HA, condensation water monitoring for compressed air system, additional stabilizer rear/trailing axle, front underride guard made of alu, residual heat utilization, PSM, starting aid, reversing alarm, ClassicSpace, comfort locking system, economy drive program, Mercedes PowerShift 3, pre-installation for toll collection, LED daytime running lights, cornering lights, High Performance Engine Brake, Powertrain Pack 1, transmission oil cooling, ESP, Lane Keeping Assist, Attention Assist, Active Brake Assist, MB 124-10c MPA N-/M-Speed auxiliary drive. Load chart: 5.5m-3490kg, 7.4m-2520kg, 9.3m-1950kg, 11.3m-1590kg. Ledpfx Asvhny Aoanehr Pallet tongs available for an extra charge of € 2,900.00 net! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, mileage: 4,33,811 km, power: 294 kW (399.73 HP), first registration: 08/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 09/2024, color: red, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,500 mm, loading space volume: 48 m³, loading space length: 8,230 mm, loading space width: 2,480 mm, loading space height: 2,370 mm, Year of construction: 2015, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, tail-lift, * ANTOS 2540 LL beverage platform 8.25 m with tail lift 2,000 kg * Body: SPIER with SLIDING TARPAULIN right + left * 2 x 4-row rear load securing VDI 2700 * matching 2-axle TANDEM trailer 6.60 m LBW 2,000 kg * UNDERCOUPLED Year of manufacture 2013 Vehicle no. 2285 * Vehicle no. for customer inquiries: 3644 and 2285 * Engine version Euro VI * Trailing axle, 7.5 t, steered, load-relieving * Distance control assistant * Lane keeping assistant * Roll control assistant * Air suspension, rear axle, low frame * Air conditioning * Differential lock rear axle * Tail lift * Active Brake Assist 3 * Attention assistant * Stability control assistant (ESP) * Wheel formula 6x2 ENA * Front axle air-suspended * Antos * Cruise control * Airbag, driver * Engine brake, standard system * Tank 390 l, left, 650 x 565 x 1250 mm, aluminum * Digital tachograph, EG, speed, ADR * Mercedes PowerShift 3 * Gearbox G 211-12/14.93-1.0 * Comfort locking system Lhsdpfx Asqwu Rloanor * Locking system, with Central locking * Air horn * Sun visor outside, transparent * Driver's suspension seat, air conditioning * Trailer brake connection rear, Duo-Matic+Standard * Trailer brake, 2-line, brake connections left * Electronic braking system with ABS and ASR * Engine OM 470, R6, 10.7 l, 290 kW (394 HP), 1900 Nm * AdBlue tank 60 l, left * Tubeless tires, 315/70 R 22.5 HA * Tubeless tires, 315/70 R 22.5 VA/VLA/NLA * M-cab ClassicSpace, 2.30 m, tunnel 170 mm * Reversing alarm * Trailer socket 24 V, 15-pin * Starting aid, speed limit 30 km/h * Roof hatch/roof ventilation flap * Storage, high, on Engine tunnel * Wheelbase 5500 mm * Heating, electronic compressed air supply unit * Reinforced end cross member * Particle filter * Environmental sticker (green) * Two-seater * Service booklet maintained * 2/3 doors No liability for printing and spelling errors. Sale only to traders. Errors and prior sale reserved. Changes, prior sale and errors are expressly reserved. The description serves to identify the vehicle and does not constitute a guarantee in the sense of sales law. The description in the purchase contract is decisive. * TOP SERVICE + QUALITY * We are happy to make you a LEASING-FINANCE-LEATHER PURCHASE offer * Guarantee insurance available on request from the insurer * TÜV / UVV LBW / speedometer inspection and installation of OBU device by our local partners * Customs license plate for 30 days * All customs documents for export are possible, but must be requested individually * TOLL for Toll-Collect can be booked in-house * Free transfer from Stuttgart Airport or Metzingen (Württ) train station * TRAIN STATION FOR ARRIVAL/TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH ? Andreas Pittas ? Thomas Pittas * Alexander Pittas ? Robin Pittas WHATSAPP number* ? ----* Visit us on our website at * Over 150 vehicles in stock at all times

Condition: used, mileage: 5,43,000 km, power: 290 kW (394.29 HP), first registration: 05/2016, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 01/2025, color: silver, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, * Medium-length cab * Full air suspension * Differential lock * Reversing camera * Adaptive cruise control * Attention assist * Active Brake Assist * Lane keeping assist * Three-stage performance-optimized constant throttle * Air conditioning * Heated seats * Automatic transmission * Euro 6, green emissions sticker In combination with 2-axle semi-trailer: Manufacturer: Rohr First registration 05/2016 . 29,000 kg Payload 21,860 kg Internal loading dimensions 13,600 x 2,600 x 2,150 mm 2,000 kg Bär tail lift Double rear wing doors Trideck steering Lhedpfx Aeww Rp Dsaner MB axles Lift axle Aluminium floor Frigoblock HK 25-2 refrigeration unit Galvanised chassis ---- Special equipment: Front axle load 8.0 t, driver's side airbag, work lights, audio system: CD radio (Bluetooth), exhaust downwards right side, 220 Ah battery, compressed-air connection in cab, aluminium air tank, driver assistance system: Attention Assist (drowsiness detection sensor), driver assistance system: Brake Assist (Active Brake Assist 3), tinted windscreen with shade band, 150 A alternator, info display 12.7 cm with additional display, integral rear, communication interface, engine PTO front prepared for Frigoblock, reinforced engine brake, programmable special module, acoustic reverse warning (external warning signal), low-maintenance fifth wheel coupling, circuit breaker, driver's seat comfort suspension seat, sunblind for side window, driver's door, voltage converter 24V / 12V 10 A, additional 24V socket in passenger footwell, CB radio preparation, fridge/coolbox preparation, additional heat insulation, auxiliary heater (water) Additional equipment: EURO 6 emission standard, axle configuration: 4x2, trailer socket 24V / 15-pin, Antos, exterior mirrors electrically adjustable and heated, rear axle differential lock, medium air supply unit, driver assistance system: lane keeping assist, cab width: 2.30 m, cab: hydraulic tilting mechanism, cab: M ClassicSpace, cab: steel-sprung, standard, cab: reinforced (Sweden), cab floor with engine tunnel 320 mm, suspension: front spring bracket aluminium, suspension: front springs 7.5 t, 2-leaf, electric windows, 12-speed transmission - type: G 211-12, urea tank (AdBlue): 60 liters, manual steel roof hatch, rear axle crown wheel 440, body/chassis: tractor unit, comfort closing system, three-piece mudguards, fuel tank: 390 liters aluminium, unregulated power steering pump, front air intake, engine 10.7 liters - 290 kW R6 diesel (OM 470), engine compartment encapsulation, wheelbase 3,700 mm, ramp mirror, spare wheel, residual heat utilization, disc brakes front and rear axles, seat upholstery: fabric, cab passenger function seat, front spray guard, front axle stabilizer, cab 24V socket, tachograph / EC control unit, aerodynamically shaped underbody cladding, front underrun protection, toll system preparation, cranked front axle, regulated water pump, permissible gross weight 18.00 t

Condition: used, mileage: 2,44,000 km, power: 290 kW (394.29 HP), first registration: 06/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, loading space length: 6,900 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, Equipment: ABS, air conditioning, tail-lift, We are very pleased that we have aroused your interest with our offer and can already assure you that you can buy a good and reasonably priced vehicle with a traceable service history from us! MB ANTOS 2540 with certified Spier sliding tarpaulin body Rear load securing LBW 2,000 KG AHK LENKACHSE 315 / 60 R 22.5 tires PAYLOAD: 14,450 KG GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We organize your registration and the export documents / EUR 1 and manufacturer's declaration for export. FINANCING On request, we will be happy to provide you with a LEASING-MIET PURCHASE or FINANCING OFFER. SERVICE Lhjdpfx Aowz T Ecoanor TÜV-HU / UVV LBW / LGS-PRÜFUNG / tacho check / installation of OBU device and service by our MARKENWERKSTATT on site TOLL / ROAD CHARGES Tolls can be booked on site. ARRIVAL / DISTANCES Wittlich train station 500 m away Frankfurt airport 150 KM away Frankfurt-Hahn airport 40 KM away Luxembourg airport 75 KM away Sale according to our AGBs. The details on the Internet are non-binding descriptions. They do not represent guaranteed properties. The seller is not liable for typing and data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: used, mileage: 2,79,159 km, power: 290 kW (394.29 HP), first registration: 03/2016, fuel type: diesel, empty load weight: 14,580 kg, maximum load weight: 11,420 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,900 mm, next inspection (TÜV): 03/2025, brakes: engine braking, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, loading space length: 6,510 mm, loading space width: 2,490 mm, loading space height: 950 mm, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, crane, cruise control, differential lock, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, ClassicSpace, Active Brake Assist, Mercedes PowerShift 3, optional house, 1x comfort seat, heated seats, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, cruise control, ABS (anti-lock braking system), traction control (ASR), constant throttle, power take-off, differential lock, work lights, air suspension, air+light trailer hitch, aluminum tank, last axle hydr. steered, lashing eyes, U-protection, side aluminum driving protection, pendulum flaps, roof hatch, crane at the rear, emergency stop, grab control, high seat, 2-point hydraulic outriggers, 3x hydr, 3x hydr. extensions, green environmental sticker Wheelbase: 4900 mm Body: Platform body with aluminum side walls & rear crane HMF 2110-L3 with high seat Front axle air-suspended, 8t front axle, rear axle disc wheel 440 hypoid 13t, 7.5t trailing axle steered/reliefable, electronic brake system with ABS and ASR, disc brakes on VA and HA, condensation water monitoring for compressed air system, additional stabilizer rear/trailing axle, front underride guard made of alu, residual heat utilization, PSM, starting aid, reversing alarm, ClassicSpace, comfort locking system, economy drive program, Mercedes PowerShift 3, pre-installation for toll collection, LED daytime running lights, cornering lights, High Performance Engine Brake, transmission oil cooling, ESP, Lane Keeping Assist, Attention Assist, Active Brake Assist, MB 124-10c MPA N-/M-Drahzahl auxiliary drive. Load chart: 5.5m-3490kg, 7.4m-2520kg, 9.3m-1950kg, 11.3m-1590kg. Pallet tongs available for an extra charge of € 2,900.00 net! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Lhodpfx Aajvhnyvonjr - .

Condition: used, mileage: 4,54,000 km, power: 290 kW (394.29 HP), first registration: 05/2016, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 01/2025, color: silver, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, * Medium-length cab * Full air suspension * Differential lock * Reversing camera * Distance control cruise control * Attention Assist * Active Brake Assist Lhedpfxevf S Hbe Aanor * Lane Keeping Assist * Constant throttle power optimized 3-stage * Air conditioning * Heated seats * Automatic gearshift * Euro 6, green sticker together with 2-axle semi-trailer: Rohr manufacturer EZ 08/2018 . 29,000 kg Payload 21,200 kg Interior load compartment dimensions 11,900 x 2,600 x 2,150 mm 2,000 kg Bear tail lift Trideck steering SAF axles Lift axle Aluminum floor Frigoblock HK 25-2 refrigeration unit Chassis galvanized ---- Special equipment: Axle load front axle 8.0 t, Airbag driver's side, Working lights, Audio system: CD radio (Bluetooth), Exhaust to bottom right, Battery 220 Ah, Compressed air connection in cab, Compressed air tank aluminum, Driver assistance system: Attention-Assist (drowsiness detection sensor), Driver assistance system: Brake assist (Active Brake-Assist 3), Tinted windscreen with band filter, Generator 150 A, Info display 12.7 cm with additional display, Integral rear, Communication interface, Front engine output with Frigoblock preparation, Engine brake reinforced, Parameterizable special module, Reversing alarm acoustic (warning signal outside), Fifth wheel coupling, low-maintenance, Automatic circuit breaker, Seats in cab: Driver's seat, comfort swivel seat, side window sunblind, driver's door, 24 V / 12 V 10 A voltage transformer, 24 V socket in passenger footwell, CB radio preparation, cool box / refrigerator preparation, additional heat insulation, additional heating (water) Further equipment: EURO 6 emissions standard, axle configuration: 4x2, trailer socket 24V / 15-pin, Antos, exterior mirrors electr. adjustable and heatable, Differential lock rear axle, Compressed air unit medium, Driving assistance system: Lane departure warning system, Cab: Width 2.30 m, Cab: Hydraulic tipper, Cab: M ClassicSpace, Cab: Steel-sprung, Standard, Cab: Reinforced (Sweden), Cab floor with engine tunnel 320 mm, Suspension: front spring bracket aluminum, Suspension: front springs 7.5 t, 2 leaf, Electric windows, Transmission 12-speed - Type: G 211-12, Urea tank (AdBlue): 60 Ltr., lifting roof manual (steel), rear axle disc wheel 440, body/superstructure: tractor unit, comfort locking system, 3-part mudguards, fuel tank: 390 l aluminum, unregulated power steering pump, air intake from front, engine 10.7 ltr. - 290 kW R6 diesel (OM 470), engine compartment encapsulation, wheelbase 3700 mm, ramp mirror, spare wheel, residual heat utilization, disc brakes front and rear axle, seat cover / upholstery: fabric, seats in cab: Passenger functional seat, Front splash guard, Front axle stabilizer, 24 V cab socket, Tachograph / EC tachograph, Aerodynamically shaped underbody panelling, Front underride guard, Preparation for toll collection, Cranked front axle, Regulated water pump, Perm. Gross vehicle weight 18.00 t

Condition: used, mileage: 2,45,000 km, power: 290 kW (394.29 HP), first registration: 06/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, loading space length: 6,900 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, Equipment: ABS, air conditioning, tail-lift, We are very pleased that we have aroused your interest with our offer and can already assure you that you can buy a good and reasonably priced vehicle with a traceable service history from us! MB ANTOS 2540 with certified Spier sliding tarpaulin body Rear load securing LBW 2,000 KG AHK LENKACHSE 315 / 60 R 22.5 tires PAYLOAD: 14,450 KG GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We organize your registration and the export documents / EUR 1 and manufacturer's declaration for export. FINANCING On request, we will be happy to provide you with a LEASING-MIET PURCHASE or FINANCING OFFER. SERVICE TÜV-HU / UVV LBW / LGS-PRÜFUNG / tacho check / installation of OBU device and service by our MARKENWERKSTATT on site TOLL / ROAD CHARGES Tolls can be booked on site. ARRIVAL / DISTANCES Wittlich train station 500 m away Frankfurt airport 150 KM away Frankfurt-Hahn airport 40 KM away Luxembourg airport 75 KM away Ledpfx Aasv Thhwonehr Sale according to our AGBs. The details on the Internet are non-binding descriptions. They do not represent guaranteed properties. The seller is not liable for typing and data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: used, mileage: 4,52,000 km, power: 290 kW (394.29 HP), first registration: 06/2015, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: silver, gearing type: automatic, emission class: euro6, Year of construction: 2015, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, * Fully air-suspended * Medium-length cab * Adaptive cruise control * Lane keeping, attention, and brake assist * 3-stage retarder * Reversing camera * Automatic transmission * Differential lock * Automatic climate control Lsdpfeuuvrcox Aanehr * Comfort seat with heating * Euro 6, green emissions sticker 2-axle refrigerated semi-trailer * Manufacturer: Ackermann * First registration: 10/2011 * Gross weight: 31,000 kg * Payload: 21,710 kg * Loading dimensions: 13,100 x 2,500 x 2,150 mm * Trideck steering * MB axles * Fully air-suspended * Aluminum floor * Frigoblock refrigeration unit * 2,000 kg Bär tail lift * Tires: 8x 315/70 R 22.5, 50-60% ---- Special equipment: Front axle load 8.0 t, driver’s airbag, work lights, audio system: CD radio (Bluetooth), exhaust downwards right, battery 220 Ah, compressed air connection in cab, aluminum compressed air tank, driver assistance system: attention assist (fatigue detection sensor), driver assistance system: brake assist (Active Brake Assist 3), driver assistance system: lane keeping assist, tinted windscreen with band filter, alternator 150 A, info display 12.7 cm with additional indicator, integral rear, communication interface, front engine PTO prepared for Frigoblock, reinforced engine brake, parameterizable special module, reverse warning acoustic (external warning signal), low-maintenance fifth wheel coupling, automatic circuit breaker, driver's seat: comfort suspension seat, sun visor roller blind side window, driver’s door, voltage converter 24V/12V 10A, additional 24V socket in passenger footwell, CB radio preparation, Fleetboard preparation, preparation for cooler box/refrigerator, additional thermal insulation, additional heater (water) Additional equipment: Emission standard EURO 6, axle configuration: 4x2, trailer socket 24V / 15-pin, Antos, exterior mirrors electrically adjustable and heated, rear axle differential lock, medium compressed air unit, cab width: 2.30 m, cab: hydraulic tilting system, cab: M ClassicSpace, cab: steel suspension, standard, cab: reinforced (Sweden), cab floor with 320 mm engine tunnel, suspension: leaf/air, front spring bracket aluminium, front suspension: 7.5 t, 2-leaf springs, electric windows, gearbox 12-speed - Type: G 211-12, urea tank (AdBlue): 60 L, manually operated roof hatch (steel), rear axle crown wheel 440, body/construction: tractor unit, comfort locking system, 3-piece mudguards, fuel tank: 390 L aluminium, power steering pump non-regulated, air intake from front, engine 10.7 L - 290 kW R6 diesel (OM 470), engine compartment encapsulation, wheelbase 3,700 mm, ramp mirror, spare wheel, residual heat utilization, disc brakes front and rear axles, seat cover/upholstery: fabric, driver's cab seats: functional co-driver seat, front spray protection, front axle stabilizer, cab socket 24V, tachograph / EC control unit, aerodynamically shaped underbody panel, front underrun protection, toll pre-installation, cranked front axle, controlled water pump, permitted gross weight 18.00 t

Condition: used, mileage: 6,56,000 km, power: 290 kW (394.29 HP), first registration: 06/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 06/2024, color: silver, gearing type: automatic, emission class: euro6, total width: 2,600 mm, total height: 3,650 mm, loading space volume: 84 m³, loading space length: 8,100 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, * Through-loading device into the trailer * Frigoblock EK 25 U refrigeration unit * Driving operation with generator + 380 volt stationary operation * 2,000 kg tail lift * Medium-length cab * Automatic gearshift * Constant throttle * Euro 6 * Adaptive cruise control * Lane departure warning system * Navigation system * Differential lock * Full air suspension * reversing camera * Spoiler * Automatic air conditioning * Heated seats * Aluminum floor * Interior load compartment 8,100 x 2,480 x 2,200 mm * Tires front + hi. 385/55 R 22.5, mi. 315/70 R 22.5Only available as a train with Delivery only with matching trailer: * Flap at the front for loading into the truck * Drawbar pneumatically extendable * Frigoblock refrigeration unit EK 25 U * Drive mode with generator + 380 volt standby mode Lhjdpfx Aovcudksanjr * 2,000 kg tail lift * Manufactured by Wüllhorst * Interior loading space 7,350 x 2,480 x 2,200 mm * 18,000 kg . * EZ 06/2018 * SAF axles * Disc brakes * Air suspension The price includes the truck and the trailer as a complete train. Several trains available, from year of construction 2015 - 2018---- Special equipment: Axle load front axle 8.0 t, Airbag driver's side, Audio system: CD radio (Bluetooth), Exhaust to bottom right, Battery 220 Ah, Brake connection standard and DuoMatic, Compressed air connection in cab, Compressed air tank aluminum, Compressed air unit high, Driving assistance system: Lane departure warning system, Tinted windscreen with band filter, Vehicle without trailer coupling, Generator 150 A, Info display 12.7 cm with additional display, Communication interface, Air compressor 2-cyl, Engine output front with preparation Frigoblock, Engine brake reinforced, Parameterizable special module, Reversing alarm acoustic (warning signal outside), Switch tail lift, Automatic circuit breaker, Seats in cab: Driver's seat Swivel seat comfort, Sun protection roller blind side window, Driver's door, Voltage transformer 24V / 12V 10 A, Steel rims 11.75x22.5 (on trailing axle), steel rims 11.75x22.5 (on front axle), additional 24V socket in passenger footwell, preparation 2nd control unit for level control, preparation CB radio, preparation cool box / refrigerator, additional heat insulation, additional heating (water) Further equipment: EURO 6 emissions standard, axle configuration: 6x2, trailer brake 2 - line, left-hand connections, trailer socket 24V / 15-pin, Antos, exterior mirrors electr. adjustable and heatable, rear axle differential lock, cab: width 2.30 m, cab: hydraulic tipping device, cab: M ClassicSpace, cab: steel-sprung, standard, cab floor with engine tunnel 320 mm, suspension: air / air (full air), electric window lifter, 12-speed gearbox - type: G 211-12, urea tank (AdBlue): 60 ltr, Manual lifting roof (steel), Rear axle disk wheel 440, Body/structure: Chassis, comfort locking system, fuel tank: 290 ltr. aluminum, unregulated power steering pump, lift device trailing axle, air intake from front, engine 10.7 ltr. - 290 kW R6 diesel (OM 470), engine compartment encapsulation, trailing axle with single tyres, ramp mirror, spare wheel, residual heat utilization, front and rear axle disc brakes, seat cover/upholstery: fabric, seats in cab: Passenger functional seat, Front splash guard, Front axle stabilizer bar, Additional stabilizer bar, Rear axle / trailing axle, 24 V cab socket, Tachograph / EC tachograph, Aerodynamically shaped underbody panelling, Front underride guard, Preparation for toll collection, Cranked front axle

Condition: new, Year of construction: 2025, travel distance X-axis: 12,000 mm, travel distance Y-axis: 6,500 mm, travel distance Z-axis: 5,400 mm, STOCK NUMBER ONY100000578 MODEL YEAR 2025 CONTROL PANEL HEIDENHAIN TNC 640 AXIS MOVEMENT X 12.000 MM / Y 6.500 MM / Z 4.500 MM INTERCHANGEABLE SPINDLE HEAD TYPES 6 1-)5001 MILLING ANGLE HEAD TYPE VP2 SPINDLE TAPER SK 50 / BIGPLUS SPINDLE SPEED (CONTINUOUSLY) 20– 4.000 REV. / MIN MAX. TORQUE OF SPNDLE 1.000 Nm Lsdjx Iutnjpfx Aanehr MOTOR POWER OUTPUT ON THE MAIN SPINDLE 41 kW SPEED OF SPINDLE TURNING AROUND VERTICAL AXİS 1 - 1.800 °/ MIN MAX. TORQUE ARROUND THE VERTİCAL AXIS 2.500 Nm 2-)5005 MILLING ANGLE HEAD TYPE VP14 SPINDLE TAPER SK 50 SPINDLE SPEED (CONTINUOUSLY) 20– 4.000 REV. / MIN MAX. TORQUE OF SPNDLE 400 Nm MOTOR POWER OUTPUT ON THE MAIN SPINDLE 15 kW SPEED OF SPINDLE TURNING AROUND VERTICAL AXİS 1 - 1.800 °/ MIN MAX. TORQUE ARROUND THE VERTİCAL AXIS 2.500 Nm 3-) MILLING ANGLE HEAD TYPE VPZSPEC. SPINDLE TAPER HSK-80A SPINDLE SPEED (CONTINUOUSLY) 20– 3.000 OT / MIN MAX. TORQUE OF SPINDLE 400 Nm MOTOR POWER OUTPUT ON THE MAIN SPINDLE 20 kW SPEED OF SPINDLE TURNING AROUND VERTICAL AXİS 1 - 1.800 °/ MIN MAX. TORQUE ARROUND THE VERTİCAL AXIS 2.500 Nm 4-) 1.1.2.1 STRAIGHT MILLING HEAD VA1 SPINDLE TAPER 7/24 ČSN ISO 9270-1(22 0435) SK 50 / BIGPLUS TOOL CLAMPING COLLET TYPE SPINDLE SPEED (CONTINUOUSLY) 20 – 4.000 RPM MAX. SPINDLE POWER S1-100% / S6-0% 41 kW MAX. SPINDLE TORQUE 2.000 Nm 5-) 5008 UNIVERSAL MILLING HEAD VO SPINDLE TAPER SK 50 SPINDLE SPEED (CONTINUOUSLY) 20 – 4.000 RPM TOTAL MOTOR OUTPUT ON MAIN SPINDLE 41 kW MAX. SPINDLE TORQUE 1.250 Nm SPEED OF SPINDLE TURNING AROUND AXIS ( C ) 1-1.800 °/ MIN MAX. TORQUE OF HEAD SWIVELING AROUND AXIS ( C ) 2.500 Nm 6-) 1.1.2.2 FULLY CONTINUOUS 2 AXIS MILLING HEAD VS SPINDLE TAPER 7/24 ČSN ISO 9270-1(22 0435) SK 50 SPINDLE SPEED (CONTINUOUSLY) 20 – 4.000 RPM TOTAL MOTOR OUTPUT ON MAIN SPINDLE 41 kW MAX. SPINDLE TORQUE 1.000 Nm ROTATION RANGE AROUND THE VERTICAL AXIS + / - 180° ROTATION RANGE AROUND THE CROSS AXIS + 120 ° / - 120 ° AXIS TO PERPENDICULAR TO CROSS AXIS 1-1.800 / 1-3.600 °/ MIN MAX. TORQUE AROUND CROSS AXIS 2.500 / 2.100 Nm CHAIN TOOL MAGAZINE TYPE R100 TOTAL POWER REQUIREMENT 240 KVA DIMENSIONS OF THE MACHINE 15.90 X 24.20 X 7.50 M

Year of construction: 2007, condition: ready for operation (used), Main Drive Number of axis 5 Movement X-Axis Movement 3500 mm Z-Axis Movement 1500 mm Y-Axis Movement 1200 mm This 5-axis TOS Varnsdorf WHN130 was manufactured in 2007. It features a horizontal boring and milling machine with a table size of 1800 × 1800 mm and a spindle diameter of 130 mm. The machine includes a rotary table and is controlled by an NCT-104 system. Consider the opportunity to buy this TOS Varnsdorf WHN130 boring machine. Contact us for more information. Application Types Lhedpfx Asx Imtasanjr Other Machine Tools

Condition: good (used), Heidelberg Cylinder KSB 40×57 Hot Stamping Machine A very rare model on the market. The machine is ready for operation and in very good condition. After inspection. Factory-installed new hot stamping unit. Suitable for die-cutting. Central lubrication. Format 40x57cm Weight 3500kg Lhodsx Hqmhspfx Aansr 380V power supply Includes additional components, fillers, and letterpress locks.

Condition: excellent (used), For sale: Professional turning and finishing holder with SK40 mounting, ideal for facing, finishing, and rough machining of end and flat surfaces. The high-quality tool steel construction ensures stability, rigidity, and high clamping precision. 📌 Technical data: • Type: Turning and finishing holder with insert • Mounting: SK40 DIN 69871 B • Dimensions: SK40 × 40 × 40 • Head diameter: Ø40 mm • Total length: approx. 60 mm • Condition: Used, very good technical condition – fully functional ✅ Advantages: • High machining accuracy and clamping rigidity Lhodpjxizb Esfx Aaner • Suitable for use with indexable inserts • Designed for facing, finishing, and rough machining • Compatible with milling machines and machining centers with SK40 mounting

Condition: excellent (used), Catalogue number 7804 TECHNICAL DATA - Track width: 350mm - Shaft width: 330mm - Mounted blade: 300mm - Max blade diameter: 400mm - Blade bore diameter: 70mm - Max cutting height with 400mm blade: 150mm - Table dimensions: 2240x770mm – From above: - kickback/retractors - slip roller - retractors - smooth slip roller - shaft with saw blades Lhsdpfxexvb S Ro Aansr - 2 slip and pressure shafts – From below: - roller in front of the table - guide - pawls - track - central track lubrication - electric raising of saw blade shaft 0.75kW - electric raising of machine body 0.75kW - variable feed speed adjustment - Extraction nozzle diameter: 320mm - Main motor: 45kW - Overall dimensions (L/W/H): 2280x1820x2040mm - Weight: 2850kg ADVANTAGES – Czech production – Used multi saw machine – Technical documentation (DTR) – Very good condition Net price: 62,900 PLN Net price: 14,970 EUR depending on EUR rate 4.2 (Prices may change with significant fluctuations)

Condition: excellent (used), Year of construction: 1994, Stroj v dobrém provozním stavu, včetně digitálního odečtu. Plocha upínacího stolu mm 400 x 800 Pracovní zdvih: podélná mm 600 kříž mm 400 vertikální mm 400 Kužel ve vřetenu ISO 40 Rozsah otáček rpm.40 - 2000 Počet otáček kroky 18 Výkon hlavního motoru kW 3,0 Celkový vstup stroje kVA 6,5 Rozměry stroje mm 1675 x 1680 x 1740 Lhsdpfx Ajxdxp Neaner Hmotnost stroje kg 1725

Condition: used, Surface grinder, TOS BPH 20 NA, Used machine Manufacturer: TOS Type: BPH 20 NA Overall dimensions: Width: 1820 mm Depth: 1540 mm Height: 1800 mm Electrical data: 380V; 50Hz Table size: 835 × 250 mm Magnetic table size: 650 × 250 mm Maximum grinding width: 250 mm Maximum workpiece height: 350 mm Max. table load: 180 kg Grinding wheel: 260 × 35 mm Machine weight: approx. 1600 kg Ledpfx Aex Hgvloanehr Accessories: Coolant system Magnet chuck mounted on the table (650 × 250 mm)

Condition: ready for operation (used), Max. diameter: 320mm Max. working length: 1000mm Ledsx Iuuropfx Aanehr

Year of construction: 2020, operating hours: 2,421 h, condition: ready for operation (used), travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 940 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 640, number of axes: 4, Control Unit Brand HEIDENHAIN Model iTNC 640 Ljdpfx Aex D Hhmjanehr Main Drive Number of axis 4 Movement X-Axis Movement 1250 mm Y-Axis Movement 1100 mm Z-Axis Movement 940 mm W-Axis Movement 710 mm Workpiece Workpiece weight 3000 kg This 4-axis TOS Varnsdorf WHQ 10 CNC boring machine was manufactured in 2020. It features a spindle diameter of 100 mm, ISO 50 taper, and spindle speeds up to 2500 rpm. The table can handle weights up to 3000 kg and includes a 40-position tool changer. Currently operational, though "Y" axis calibration is needed. Consider the opportunity to buy this TOS Varnsdorf WHQ 10 CNC boring machine. Contact us for more information about this machine. Application Types Other Machine Tools

Condition: excellent (used), Digital external micrometer by the renowned brand Mahr Micromar 40 EWR. Measuring range 25–50 mm with an accuracy of 0.001 mm. LCD display with ZERO, ABS, REL, and TOL functions. IP65 protection rating – dustproof and splash-resistant. Set includes gauge standard, key, documentation, and original case. Technical and visual condition very good. Lsdpfjxl Hqdsx Aanshr

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 14219, travel distance X-axis: 1,250 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 560 mm, spindle diameter: 75 mm, spindle speed (max.): 1,800 rpm, TECHNICAL DETAILS X-axis: 1,250 mm Y-axis: 900 mm Z-axis (or W-axis): 560 mm Spindle diameter: 75 mm Spindle speeds: 18-1,800 rpm Lhsdpjx Ng Tvjfx Aanor Table size: 950 mm x 950 mm MACHINE DETAILS Weight: 10,000 kg

Condition: good (used), Heidelberg Cylinder KSB 40×57 Automatic die-cutter A very rare model on the market. The machine is ready to work, in very good technical condition. After inspection. Suitable for die-cutting. Central lubrication. Format 40×57 cm Ledpfx Aaewmy Rienohr Weight 3500 kg Power supply 380 V Includes two drawers of additional elements, frame, sheet metal for the cylinder, fillers and typographic locks.

Condition: excellent (used), CATALOG NUMBER: 7663 TECHNICAL DATA - Maximum planing width: 510 mm - Maximum planing height: 200 mm – Top section: - Anti-kickback fingers - Feed roller, toothed - Hold-downs, 2 rows - Infeed roller, toothed - Hold-down - Planing shaft, 510 mm, 4-knife, 7.5 kW motor - Hold-downs - Discharge feed roller, smooth - 2 outfeed pressure rollers Lsdpfswqchfox Aanjhr - Smooth feed roller – Bottom section: - Hold-down - Adjustable infeed table with slip roller - Planing shaft, 510 mm, 4-knife, 5.5 kW motor - 2 smooth slip rollers - Side pressure roller – Rear section: - Side spindles: 1) Vertical right: 140 mm, 4 kW 2) Vertical left: 140 mm, 4 kW - Spindle diameter: 40 mm - Fitted cutterheads: 4-knife, height 120 mm - Spindles adjustable up/down, left/right - Stepless feed speed adjustment - Electric table elevation - Extraction port diameters: 3x150 mm, 1x110 mm - Dimensions (L/W/H): 2300x1700x1700 mm - Weight: 2,200 kg ADVANTAGES – Ideal for flooring processing – Electric table elevation – Manufactured in Czech Republic – Used planer in very good condition Net price: 36,900 PLN Net price: 8,780 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: good (used), Technical data for pallet rack beam: Racking system: SSI Schäfer Type: PR600 Included in delivery: 01x Pallet rack beam, used Material color: RAL 5010 gentian blue Box profile: 100 x 40 mm Beam type: TRV1-270-104-30 CE Bracket: 5 HK (hooks) Clear span: approx. 2,700 mm Max. load per pair of beams: 2,400 kg, with evenly distributed load. 02x Safety pins, used Version: completely galvanized Lhedpfxjwp Dzws Aanor For securing the crossbeams Your contacts in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for pick-up. Any desired transport or shipment of this item is associated with additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), Professional digital micrometer from the renowned brand Mahr – model Micromar 40 EWR(i) – designed for extremely precise measurements with accuracy up to 0.001 mm. The device in IP65 version is resistant to dust and water, making it ideal for applications in metrology, quality control, and industrial workshops. . Measuring range: 100 – 125 mm . Accuracy: 0.001 mm . Digital readout with large, easy-to-read LCD display . Protection rating: IP65 – resistant to dust and splashes . “ABS” and “Hold” functions – quick measurement hold and zeroing function . High-stiffness frame, ergonomic grip . Includes original box, certificate, user manual, and 100 mm calibration standard . Condition: virtually new / only used for testing Lhodpfexl Rgijx Aansr

Condition: excellent (used), CATALOG NUMBER 7244 TECHNICAL DATA - max working width: 800 mm - max working thickness: 160 mm Top side: - smooth feed roller - anti-kickback fingers - segmented, toothed, feed roller (allows simultaneous planing of multiple elements) - 2 pressure rows - segmented, toothed, feed roller (sequential, sectional) - pressure unit - planing shaft 810 mm, 4 knives, 18.5 kW - pressure unit - smooth, metal feed roller Bottom side: - adjustable infeed table with smooth roller - smooth feed roller Ledpfxjrfb Nvs Aanehr - planing shaft 810 mm, 4 knives, approx. 10 kW - 2 smooth, metal feed rollers, adjustable - metal, smooth feed roller - electric table elevation - stepless feed speed regulation 7–40 m/min - motor approx. 2.2 kW - extraction port diameter 200 mm / 180 mm - dimensions (L x W x H): 1950 x 2100 x 1700 mm - weight approx. 2500 kg – manufactured in the Czech Republic – very good condition – used planer Net price: 34,900 PLN Net price: 8,200 EUR (depending on exchange rate of 4.2 EUR) (Prices may vary with greater fluctuations)