Used Tos Sn 50 for sale (37,100)

Condition: excellent (used), Catalogue number: 7889 TECHNICAL DATA track width: 230mm shaft width: 230mm max blade diameter: 350mm / 400mm blade bore diameter: 80mm max cutting height with 350 / 400 blade: 115mm / 150mm table width (with clearance): 1200mm table length: 1900mm – from above: lock/blockers drive shaft, toothed shaft with saw blades 2 sliding/pressure rollers – from below: guide lock/blockers track 2 sliding rollers in the table feed speed adjustable manually feed motor approx. 2.2kW main motor: 30kW extraction nozzle diameter: 200mm Duedpfszab Egex Afpeu overall dimensions (L/W/H): 2700x1800x2000mm weight approx.: 3000kg ADVANTAGES – Czech production – used multisaw – DTR technical documentation – very good condition Net price: 22,900 PLN Net price: 5,450 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number 7804 TECHNICAL DATA - Track width: 350mm - Shaft width: 330mm - Mounted blade: 300mm - Max blade diameter: 400mm - Blade bore diameter: 70mm - Max cutting height with 400mm blade: 150mm - Table dimensions: 2240x770mm – From above: - kickback/retractors - slip roller - retractors - smooth slip roller - shaft with saw blades - 2 slip and pressure shafts – From below: - roller in front of the table - guide - pawls - track - central track lubrication - electric raising of saw blade shaft 0.75kW - electric raising of machine body 0.75kW - variable feed speed adjustment - Extraction nozzle diameter: 320mm - Main motor: 45kW Dusdpfx Afezab Dispou - Overall dimensions (L/W/H): 2280x1820x2040mm - Weight: 2850kg ADVANTAGES – Czech production – Used multi saw machine – Technical documentation (DTR) – Very good condition Net price: 62,900 PLN Net price: 14,970 EUR depending on EUR rate 4.2 (Prices may change with significant fluctuations)

Condition: good (used), turning diameter over bed 430 mm turning diameter over slide rest 220 mm turning length 1500 mm dia. of quill 80 mm quill stroke 200 mm Djdpfey Hxq Ujx Afpeuu taper in tailstock-quill MK-5 turning speeds 14 - 2240 U/min output 12,4 kVA spindle bore 60 mm weight of the machine ca. 2800 kg dimensions of the machine ca. 2900 x 1200 x 1700 mm

Condition: used, Year of construction: 1987, Technical details: table diameter: 500 mm table height: 70 mm rotatability of the table - manual/mechanic: ja ° Dedpfxsu Nkm Eo Afpouu weight of the machine approx.: 300 kg space requirements of the machine approx.: 0,92x0,650x0,19 m T-slots are 3 pcs longtitudinal and 1x transverse in the middle existing a=18mm h=30mm b=30mm c=13mm *

Condition: used, Year of construction: 1987, Technical details: max. pitch circle diameter: 360/24 mm weight of the machine approx.: 46 kg centre height: 130 mm swivable: ja ° rotation movement: 360 Grad dimensions: 350 x 450 x 260 mm Application: For auxiliary work e.g. scribing of graduations. -dividing attachment with chuck Ø 125 in 360° pitch circle -clamping takes place via grid with index -pitch circle 24 -chuck: Ø 125mm, with revolving scale; through hole Ø 17mm; without jaws -base plate: size 260 x 300mm, with 2 clamping grooves WxL: 15 x 21mm - chuck key Dusdpfju Nlg Tjx Afpeu - 2 pieces groove stone *

Condition: excellent (used), CATALOG NUMBER 7903 Technical data: - track width: 450mm - shaft width: 420mm - installed saw blade: 400mm - max saw blade diameter: 450mm - saw blade bore diameter: 80mm - max cutting height with 450mm blade: 160mm - table dimensions: 2230x860mm – from above: - kickbacks/stoppers - sliding shaft - kickbacks - smooth sliding roller - hold-down - shaft with saws - hold-down - 2 sliding, hold-down shafts – from below: - roller in front of the table - guide - stoppers - track - central track lubrication - manual lifting of saw shaft - electric body lifting: 0.75kW - stepless feed speed adjustment - extraction port diameter: 280mm - main motor: 75kW - overall dimensions (L/W/H): 2360x200x1960mm - weight: 3250kg ADVANTAGES – Czech production – used multi-blade saw – upper control panel – DTR (technical documentation) – very good condition Dusdsy S Ah Uepfx Afpeu Net price: 69,900 PLN Net price: 16,650 EUR Net price calculated at exchange rate of 4.2 PLN/EUR (in case of larger currency fluctuations, the price may change)

Condition: excellent (used), Year of construction: 1996, turning diameter 380 mm Dsdpfx Asx U Encjfpsuu turning length 750 mm control HEIDENHAIN ManualPlus total power requirement 9 kW weight of the machine ca. 2 t dimensions of the machine ca. 2,4 x 1,7 x 1,7 m

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 9,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,000 mm, The machine is in good technical condition, including a rotary table S 35, table dimensions 2850 x 3150 mm (photo in the attachment), 2 clamping plates, a HUI 50 swivel head, a tool magazine for 80 tools, and a Siemens 840 D control system. WRD 150 CNC Year of manufacture: 2008 Control system: SINUMERIK 840 D X-axis: 9000 mm Y-axis: 4000 mm Dsdpfxjy U Ndzo Afpsuu Z-axis: 1000 mm W-axis: 800 mm Power: 60 kW Tool magazine capacity: 80 tools Clamping plates: 2, 6000x2000 mm Swivel head: HUI 50

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 4,000 mm, spindle diameter: 150 mm, Direct sell from production. Under power and ready for immediate use. It is in excellent condition. Additional photos and videos can be sent via WhatsApp upon request. Additional technical specifications are shown in the attached pictures. Duodpfx Afey U T A Iopju

Condition: good (used), Year of construction: 2004, 1 used, well-maintained heavy NC-controlled universal console milling machine with HEIDENHAIN TNC 124 point-to-point/contour control and HEIDENHAIN HR 410 electronic handwheel, plus manually adjustable axes via hand crank. Technical specifications: Table size: 1600 x 500 mm Tool holder: ISO 50 Travel ranges: - X-axis: 1250 mm - Y-axis: 500 mm - Z-axis: 500 mm Distance between vertical spindle nose and table: 75 – 525 mm Table loading capacity: max. 800 kg 18 spindle speeds: 56 – 2800 rpm Feed range, infinitely variable: - Longitudinal and cross movement: 10 – 4000 mm/min. - Vertical movement: 2.5 – 1000 mm/min. Rapid traverse on all 3 axes: yes Drive power: 11 kW Machine dimensions (L x W x H): approx. 2520 x 2950 x 2400 mm Transport dimensions (L x W x H): 2700 x 1900 x 2400 mm Weight: 5260 kg Accessories / Special features: • HEIDENHAIN TNC 124 point-to-point/contour control • HEIDENHAIN HR 410 electronic handwheel • BAUMÜLLER AC servo drive Dsdpfx Afey Iurqjpsuu • Universal milling head model IUG 32 A, “HURON” system, manually swivels on 2 planes • Hydraulic tool clamping vertical + horizontal, ISO 50 • Swivel-away device for vertical milling head • Vibration-free operation thanks to robust, heavily ribbed cast iron guides • Ball screw spindles for X, Y, and Z axes, climb milling possible in X and Y directions • All electrical controls on one side, on movable control panel • Clamping table with foldable chip guard, electrically interlocked • Hydraulic unit integrated in the machine stand • Central lubrication • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 844 12 64, turning diameter over cross slide: 215 mm, spindle bore: 40 mm, turning diameter: 380 mm, center height: 190 mm, center width: 1,250 mm, quill stroke: 120 mm, total length: 3,020 mm, total width: 950 mm, total height: 1,500 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 14 rpm, overall weight: 1,850 kg, quill mount: MK 3, workpiece weight (max.): 300 kg, Trade show lathe, available from stock. After Trens filed for bankruptcy, we made an effort and had TOS and later Trens lathes completely overhauled. All machines were disassembled down to the last screw. Here is a run-through of a general overhaul at our company: 1. Machine cleaning, disassembly of the individual machine components 2. Grinding: bed, slide, cross support, spindle, tailstock quill Duedpfx Afjv Hzqxopou 3. Grinding + scraping of the upper support guideways, replacement: trapezoidal screw with nut and V-ledge 4. Scraping of the guide surfaces: spindle, slide, cross support, and tailstock to geometric positions according to the accuracy report 5. Replacement: screw with nut, V-ledge, and Multifix base body for the cross support (including 2 turning tool cartridges) 6. Complete disassembly and replacement of the necessary spare parts in the lock case, threaded housing, headstock, gear box, tailstock, cross support, and upper support 7. Installation, replacement if necessary, of racks, repair of the lead screw and feed screw 8. Complete bearing replacement in all machine assemblies 9. Complete replacement of machine plates 10. Priming of the machine, sealing, sanding, polyurethane topcoat, and painting of the machine accessories - white RAL 9003, anthracite RAL 7016 11. New control cabinet with electrical components, replacement: main motor, rapid traverse motor, hydraulic pump, cabling, and LED lighting of the work area 12. Preparation of the accuracy report and the electrical test report 13. Inspection and machine acceptance at the factory All refurbished machines have a CE certificate and a 12-month warranty. CE version: - Chuck guard with limit switch - Front chip guard mounted on slide - Rear chip guard - Lead screw and feed screw covers - Brakes after emergency stop within 2 seconds Special accessories (used): - Three-jaw lathe chuck Ø 190 mm - Four-jaw lathe chuck Ø 190 mm - Three-jaw lathe chuck Ø 240 mm - Four-jaw faceplate Ø 320 mm - Support center for bed slide - Various chuck jaws (10 pieces) - Collet set Ø 2 - 25 mm with collet chuck + drawbar - Special collet set (10 pieces) with collet chuck - 4-way tool holder

Condition: used, Year of construction: 2009, greates pass round over bed 1050 mm dist. between centers 6000 mm centre height 520 mm turning length 4810 mm workpiece weight max. (main spindle) 6000 kg Maximum workpiece weight with steady rests 8000 kg max. torque on the spindle 12500 Nm number of spindle speeds 2,8-560 1/min feed per revolution 0,08-56 mm chuck diameter 630 mm Maximum travel distance of the longitudinal slide 4810 mm Maximum travel distance of the cross slide (suppor 530 mm Maximum travel distance of the tool slide (support 340 mm Tailstock quill diameter 150 mm total power requirement 31 kVA weight of the machine ca. 10500 kg dimensions of the machine ca. 7860 x 1970 x 1480 mm Equipment/accessories: -2 x face plates -3 jaw chucks -2 x steady rests -Multifix holder Dedpfoygxy Usx Afpouu -Turning tools -Various tips -Technical documentation

Condition: new, We sell spare parts for the following milling machines: FN20, FNGJ20/30, FNGJ32, FNGJ40, FNGJ50, FNGP, FNG CNC FB3, FB4, FB5, FB6 as well as for lathes S32. Dujdpfxsufgb Ij Afpsu

Condition: new, Year of construction: 2026, functionality: fully functional, Swing over bed 710 mm Swing over cross slide 420 mm Swing in gap 910 mm Gap length 357 mm Center height 250 mm Dujdpfxjyt Ihnj Afpou Center distance 2000 mm Bed width 450 mm Speed ​​10 – 1600 rpm Cutting tool diameter 32 x 32 mm Spindle bore D73.5 mm Drive power 5.5 kW Tailstock sleeve D90 mm Tailstock sleeve travel 180 mm Tailstock taper Morze 5 Weight approx. 3250 kg Dimensions L x W x H = 3500 x 1100 x 1850 mm Accessories, Equipment - 3-axis indicator system - Chuck guard - 3-jaw chuck D250 mm - 4 Chuck diameter 300 mm - Tool holder guard - Long slide stop - Steady rest - Traveling steady rest - Standing center - Reduced adapters for main spindle - Tailstock - Coolant system - 4-way tool post - Machine light - Rapid traverse on longitudinal and cross slides - CE Mark - Machine manuals

Year of construction: 1998, condition: used, machine/vehicle number: 23 800 029, table mounting size: 500 x 1600 mm table movement x: 1220 mm table movement y: 500 mm table movement z: 500 mm spindle taper: SK 50 spindle turning speed range: 56 - 2800 rpm carriages longitudinal and cross: ca. 10 - 1800 mm/min carriages vertical: 2,5 - 450 mm/min electrical connection: 400 V, 16 kVA kW space needed: 2000 x 2250 x 2150 mm weight: 4500 kg Dodj Ici Uepfx Afpsuu

Condition: used, machine/vehicle number: 0257391, height of centers: 160 mm Duodpegayiwofx Afpsu distance between centers: 1500 mm grinding wheel measures: 500 x 127 x 40 mm grinding wheel rotations: 1570/2050 Upm electrical connection: 380 V kW space needed: 4400/6400 x 2000 x 1400 mm weight: ca. 4000 kg

Condition: excellent (used), functionality: fully functional, Double-shaft multiblade saw TOS SVITAVY PWR 422 450/250mm Track width: 450mm Shaft width: 450mm Shaft diameter: 60mm Bushing diameter: 80mm Maximum cutting height: 20–250mm Saw blade diameter min/max: 250–450mm Maximum width of incoming material: 860mm Minimum length of incoming material: 900mm Saw motor power: 2x110kW Duedpfx Afsycvf Tspju Feed speed adjustable via frequency inverter: 4–40 m/min

Condition: used, Year of construction: 1998, turning diameter over bed 0400 mm turning diameter over slide rest 260 mm turning length 1500 mm centre height 200 mm centre distance 1500 mm spindle bore 50,8 mm speeds 20- 3150 U/min feeds longitudinal slide 0,01 - 3,24 mm/U feeds cross slide 0,005- 1,62 mm/U weight of the machine ca. 2 t dimensions of the machine ca. 3,35 x 1,4 x 1,9 m Dedpexp Rzbofx Afpjuu voltage 400 V connected load 7,7 kVA With chuck, Multifix toolholder and digital readout.

Year of construction: 2002, condition: good (used), Heidenhain TNC 124 X-700 mm Dusdpeinukmjfx Afpsu Y-500 mm Z-500 mm taper SK40 Spindle speeds 63-3150 rpm Table 900 x 500 mm weight of machine 2500 kg machine checked before delivery spare-parts available

Condition: good (used), I sell the multirip saw of czech production TOS Svitavy PKSN32. Cutting height under the blade 120mm / possibility of adjustment Width of cut on the feed belt max. 350mm. Open design / possibility to insert wider workpieces Motor approx. 45 KW. Diameter of main saw blade max. 350mm. Feed speed controlled by variator up to 36 m/min. Total weight approx. 3500kg. Blades and adjusting rings included. Dsdpfx Afsmk E D Iepjuu The machine is in stock in Kežmarok, Slovakia. Available immediately.

Year of construction: 1980, condition: used, turning diameter over bed 655 mm turning diameter over slide rest 390 mm turning length 1250 mm spindle bore 82 mm spindle turning speed range 9-1120 U/min feeds 0,049-3 mm/U Duodslc Uk Ijpfx Afpou total power requirement 12 kW weight of the machine ca. 5,2 t required space 3,5 x 1,9 x 1,7 m m

Condition: used, Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 135 mm Dsdpfx Ajb Hbx Nofpjuu -Recording: MK2 -Drawing with the photos -Price: per piece -Number: 2 pieces -Dimensions: 200/75/H145 mm -Weight: 5 kg

Condition: used, Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder -Accessories for: tool grinding machine -Adjustment: SK50 -Tip height: 145 mm -Part head: swiveling, rotatable Duedpfxod Ar Uxs Afpou -Dimensions: 220/220/H285 mm -Weight: 17 kg

Condition: good (used), Dividing head, dividing head, rotary table, rotating table -with translation: 1:40 -Indoor recording: MK4 -Peak height: mm Dujdpfxsdc R N To Afpju -Passage: Ø 32 mm -Dividing head: swiveling -Dimensions: 430/430/H280 mm -Weight: 83 kg

Condition: like new (used), Year of construction: 2024, functionality: fully functional, grinding length: 1,650 mm, grinding diameter: 400 mm, We offer a new BUB40 x 1500 NC machine equipped with a MITSHUBISHI NC controller. The machine is still under lease with ING Lease. It has been thoroughly refurbished based on the TOS HOSTIVAR BUB 40 model by FAS GŁOWNO. Dsdpewzkywofx Afpeuu Technical data: • Maximum workpiece diameter: 400mm • Maximum workpiece length: 1500mm • Centre height: 200mm • Distance between centres: 1500mm • Minimum grindable workpiece diameter with a 380 mm grinding wheel: 20mm • Tailstock quill stroke: 40mm • Maximum tailstock clamping force: 4000N • Spindle headstock centre taper: ISO 296-1991/Morse 5 • Tailstock centre taper: ISO 296-1991/Morse 5 • Maximum workpiece weight between centres: 500kg • Maximum workpiece weight in chuck (including chuck): 100kg • Machine width (with enclosure): 6650mm • Machine depth (with enclosure, without control panel): 2400mm • Machine height (with enclosure): 1850mm • Machine weight: 7000kg • Total power requirement: 38kVA Grinding spindle: • Standard grinding wheel dimensions: 500 x 80 x 203.2mm • Grinding spindle drive motor power: 11kW • Grinding spindle rated speeds (for 430 mm / for >430 mm and 500 mm wheels): 2000 / 1744 rpm • Grinding headstock traverse servo motor power: 2kW • Grinding headstock traverse servo motor torque: 9.5Nm • Maximum continuous X-axis traverse speed: 2m/min • Minimum X-axis grinding wheel increment: 0.001mm • Maximum continuous X-axis traverse speed: 6m/min • Minimum X-axis grinding wheel increment: 0.001mm • Maximum grinding wheel increment in INC mode: 0.1 mm • Table traverse servo motor power: 3.5 kW • Table traverse servo motor torque: 16.7 Nm Workpiece spindle: • Workpiece spindle speed range: 1 – 150 rpm • Workpiece spindle servo motor power: 3.5kW • Workpiece spindle servo motor torque: 16.7Nm More information available upon request via email or phone.