Four-side planer Tos Svitavy FWC-

TOS Svitavy FWC-50

Condition: good (used), Year of construction: 2007, working width: 800 mm, Polishing machine Manufacturer: Gottschild Model: HBS Year of manufacture: 2007 High-gloss polishing machine, previously used for polishing kitchen fronts and bathroom furniture parts Working width: 800 mm 1 polishing head, moves automatically right – left Polishing motor: 0.7 / 0.9 kW Working area is detected by sensors Kjdpfjxzqrqox Anujnc Conveyor belt width 820 x length 1950 mm Conveyor belt moves forward and backward One roller conveyor each in front of and behind the transport system, B 820 mm x L 1500 mm Connected load 2.2 kW / 400 V / 50 Hz Compressed air connection 6 bar

Condition: like new (used), Max planing width: 220 mm Max planing height: 120 mm Spindle diameter: 40 Number of spindles: 4 Order of spindles: bottom 4 kW right 3 kW left 3 kW Knsdpstqwkxefx Anujc top 4 kW Working table lubrication pump Electric lifting of the body Power supply: 400 V

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, REX BIGMASTER Planer A+D+FR+FL+AFV+NSH+HFRo+HFRu 6 spindles + 2 chamfering units. Spindle arrangement: U-O-L-R-O-U Feed rate controlled by frequency inverter up to 80 m/min. Planing width 310 mm. Planing height 205 / 300. Positioning control. Kjdpfx Aezrtn Nenuenc Electrical control cabinet with control unit and power supply. Control panel. Soundproof cabin. 2 sets of tools. Technical documentation.

Year of construction: 2009, condition: excellent (used), I sell the throughfeed CNC drilling machine HIRZT Livra/B, Year 2009. Working width up to 820mm Knedonxqdwjpfx Anuec Configuration: 14 + 6 + 2 pcs. drilling units Backfeeding system to return the elements to the operator or move forwards as a throughfeed machine. Total area covered: 2000 x 2000 (+800 +800mm) Total weight: 1350 kg. With full documentation and CE. Very good condition. Available immediately.

Condition: new, Year of construction: 2024, Working width min. 20 mm Max working width 230 mm Working height min. 8 mm Working height max. 160 mm Number of spindles 4 + 1 Rotation speed 6000 Tool diameters: First lower spindle Ø 110 - 145 Right spindle Ø 110 - 200 Left spindle Ø 110 - 200 First upper spindle Ø 110 - 200 Universal spindle Ø 110 - 200 Max. hole diameter 350 mm Max. knife length (universal spindle) 240 mm Spindle diameter 40 mm 360 degree universal spindle rotation angle Engine power: The first lower spindle 5.5 kW / 7.5 HP Right spindle 5.5 kW / 7.5 HP Left spindle 5.5 kW / 7.5 HP The first 7.5 kW / 10HP upper spindle 7.5 kW / 10 HP universal spindle Lifting 0.18 kW / 0.25 HP universal spindle 3 kW / 4 HP feed Kjdpegp I Uwsfx Anujnc Feed, lift up / down 0.75 kW / 1.1 HP Total power 35.43 kW / 47.85 HP Feed speed 6-30 m / min Extraction port 150 mm Overall dimensions 4700x1720x1800 mm Weight 4.5 t

Condition: good (used), - power supply - 230 V - motor power - 0,92 kW, 1,25 HP Knsdpfor A Anqox Anusc - rotational speed - 2850 rpm - blade diameter - 250 mm - disc bore diameter - 30 mm - shield for the disc - cutting height - approx. 70 mm - cutting width - approx. 440 mm - arm length - approx. 660 mm - arm angle adjustment +/- 90° - blade angle adjustment 0°-90° - arm height adjustment - blade adjustment in vertical axis +/- 90° NO DISCS FOR DISCS

Condition: used, Year of construction: 2009, Used Machine Year of manufacture: 2009 Condition: Overhauled by a Hirzt specialist Description: The machine’s design is very simple. The workpiece is loaded into the machine. A quickly adjustable stop with pneumatic locking centers the workpiece in the machine. After a foot switch is activated, the workpiece is pneumatically clamped and automatically fed to the drilling unit (30 m/min). The vertical spindles drill from below, so that the resulting chips do not remain on the workpiece, as they would in a machining center. The horizontal spindles operate on two sides of the workpiece. The workpiece can be of any length, as it is guided to the drilling unit (= X-axis). The drilling spindles can be freely programmed individually or in groups and move along the Y-axis. The drilling depth and the horizontal drills are controlled by the Z-axis. After all holes have been drilled, the workpiece is conveyed back to the infeed side or, if desired, to the outfeed side. While in conventional machining centers the workpiece is clamped using a vacuum and the vacuum clamps must be adjusted to the workpiece size, this step is completely eliminated with the 3-axis-controlled point-to-point drilling machine. Advantages: - High machining speed - Good value for money - Compact footprint All drilling operations can be performed in a very small space: - Row drilling - Structural holes - Hardware holes - Cabinet joint holes Features: - Welded machine frame - Drilling head with 7 vertical drilling spindles and 1 horizontal double drilling spindle - 3-axis control: - X: NC-controlled plate feed via “overlapping” pneumatic clamping jaws - Y: NC-controlled drill head movement - Z: NC-controlled drilling spindle depth adjustment Knsdpszwg Tijfx Anujc - TRK precision guides - Pneumatic split pressure beam above the drilling unit - Pneumatic roller hold-down devices in the feed area - Pneumatic clamping jaws for transport - Pneumatically lockable side stop with rollers - Control via Windows XP-based PC (1 GB flash memory) - 8?? color screen - Alphanumeric multifunction keyboard including mouse - Network card - USB interface Technical Specifications: - Number of controlled axes: 3 - Maximum panel width: 1,000 mm - Maximum drilling width: 800 mm - Maximum feed rate (X-axis): 30 m/min - Drill speed: 3,400 rpm - Maximum drill bit diameter: 35 mm - Maximum total drill bit length: 70 mm - Drill bit chuck: 10 mm shank with clamping surface - Power rating: 2.5 kW - Exhaust port diameter: 100 mm - Required pressure: 6 bar - Working height: 900 mm - Fold-out roller support on the feed side, 500 x 750 mm Dimensions: 1,650 x 1,920 mm Availability: available shortly Location: North Rhine-Westphalia

Condition: used, machine/vehicle number: 008722, X axis working area: 3050 mm Y axis working area: 900 mm Knsdpfx Aneztkb Aouec Main Electrospindle power: 5.6 KW Number of controlled axes: 3 axes Total number of drilling spindles: 14

Condition: good (used), Year of construction: 2019, In stock is a well-preserved CNC doweling machine STARTECH CN Plus. The price is excluding VAT. Knedpowtnlusfx Anusc

Condition: used, mileage: 4,62,750 km, power: 368 kW (500.34 HP), first registration: 07/2019, fuel type: diesel, empty load weight: 8,131 kg, overall weight: 18,000 kg, tire size: 385/65 R22,5 - 315/80 R22,5, axle configuration: 4x4, wheelbase: 3,600 mm, color: silver, gearing type: automatic, emission class: euro6, Equipment: ABS, additional headlights, air conditioning, cruise control, differential lock, low noise, navigation system, onboard computer, parking heater, traction control, Urea tank (AdBlue) Displacement 12,419 ccm Hydraulics (power take-off) Tipping hydraulics Lane assistant Distance warning system EBS Knjdjt Aaagjpfx Anujc ESP Auxiliary air conditioning Payload 9,869 kg Pritarder Leaf-air suspension Automatic air conditioning Sun visor Rotating beacons Air horns Air-suspended cab 1 couch cool box Euro 6 C Errors excepted