Used Tos Sus 80 for sale (63,197)

Condition: ready for operation (used), Year of construction: 1970, functionality: fully functional, machine/vehicle number: 50052, Year of manufacture: 1970 Serial number: 50 052 The machine was overhauled in 2007. GENERAL CHARACTERISTICS OF THE MACHINE The machine features a fixed gantry with a moving table. The gantry is equipped with a height-adjustable crossbeam, which can be fitted with one or two vertical spindles in the VF 120 version. The gantry can also be fitted with one or two side-mounted (horizontal) VF 160 headstocks. The clamping surface consists of two interconnected clamping tables, which can also be used individually when disconnected (only one table can be operated at a time). Clamping Table: Dimensions of one table: 1,600 x 3,000 mm Total length of connected tables: 7,000 mm Clamping surface of connected tables: 6,500 mm Clamping T-slots (width x pitch x number): 28 mm x 160 mm x 9 pcs Table height from base: 900 mm Travel of one table: 3,000 mm (connected tables: 6,500 mm) Table feed rate: 20 – 2,000 mm/min Rapid traverse: 4,000 mm/min Gantry with height-adjustable crossbeam: Clearance between side columns: 2,020 mm Crossbeam height adjustment: 110 - 1,685 mm Crossbeam feed rate: 1,450 mm/min VF 160 Horizontal Headstock: Taper: ISO 60 Motor power: 30 kW Speed range: 15 – 710 rpm Feed rate: 10 – 2,000 mm/min Number of speeds: 16 VF 120 Vertical Headstock: Taper: ISO 50 Ltodpfxjxxwy Aj Aanoa Motor power: 18 kW Speed range: 28 – 910 rpm Number of speeds: 16 Overall machine dimensions (L x W x H): 14,780 mm x 5,650 mm x 4,800 mm

Condition: good (used), functionality: fully functional, turning diameter over cross slide: 220 mm, spindle bore: 50 mm, turning diameter: 400 mm, turning diameter over bed slide: 400 mm, turning diameter over top slide: 220 mm, center height: 200 mm, turning length: 1,000 mm, TOS SN 40B Gap Bed Lathe Model: SN 40B Swing over Bed: 400mm Swing over Saddle: 220mm Swing in Gap: 600mm Distance Between Centres: 1000mm Spindle Speeds: 22 – 2000 RPM Spindle Bore: 50.8mm Motor: 5.5 KW Machine with: 3 jaw chuck 4 jaw chuck Quick Change Toolpost Fixed Steady Ljdpfx Aexxyy Soaneta

Condition: excellent (used), Year of construction: 1991, A very well-preserved milling machine, make: TOS KURIM, model: FGS 32/40, machine no.: 23304040, equipped with digital readout and milling cutters. Table clamping area: 320x1400 mm Longitudinal table travel: 1000 mm Transverse travel of milling head: 400 mm Ljdpfsxzdnxjx Aansta Vertical table travel: 450 mm Table taper: ISO 50 Spindle diameter at front bearing: 100 mm Maximum spindle torque: 1500 Nm With vertical milling head Video available on request Weight: 4400 kg

Condition: good (used), travel distance X-axis: 4,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 2,000 mm, table load: 20,000 kg, Spindle diam. 130 mm Spindle nose attachment iso 50 X-axis stroke: 4000 mm Lsdpfevxvcasx Aaneta Y-axis stroke: 3000 mm (vertical) Z-axis stroke: 2000 mm W-axis stroke: 800 mm Spindle motor power 37 kw Spindle speed 0 - 3000 rpm Table 1800 x 2500 mm Table capacity 20 tons CNC HEIDENHAIN TNC I 530 ATC 60 places Chip conveyor Electronic handwheel Coolant through spindle Spindle sleeve

Condition: excellent (used), TOS SVITAVY FWC 50.2 Planing width: 500 mm Max. planing height: 200 mm Lower cutterhead: 4 knives 5.5 kW motor Upper cutterhead: 7.5 kW Right spindle diameter: 40 mm Ltjdpfxsw A I Ius Aanoa 4 kW motor Left spindle diameter: 40 mm 4 kW motor Electric height adjustment

Condition: used, Year of construction: 1982, Technical details: table length: 2200 mm table width: 2500 mm table load: 16 t total power requirement: 6,5 kW Ljdpfx Ajvb A Uujanjta feed speeds: 1,25 - 160 mm/min rapid traverse speed: 2000 mm/min longitudinal adjustment: 1500 mm weight of the machine ca.: 12 t dimensions of the machine ca.: 4,1 x 2,65 x 0,95 m

Condition: excellent (used), For sale: this machine. A video of the machine can be sent via WhatsApp. Complete and fully functional, already dismantled and stored in the warehouse. Very good condition. Max. workpiece diameter: 2300 mm. Max. workpiece height: 1500 mm. Clamping plate diameter: 2000 mm. Max. workpiece weight: 15,000 kg. Main motor power: 63 kW. Dimensions (L x W x H): 6160 x 3620 x 6220 mm. Machine weight: 32,600 kg. Ltsdpfxjxwlpvj Aanea

Condition: good (used), Year of construction: 2004, more pieces industrial gas burners Oilon GP-80 H + double GasMultiBloc Dungs MB ZRDLE 420 B01 S20 +Dungs FRS 520 OILON GP-80 H Capacity: 350-1000KW established in 2005 Voltage: 230 / 400V 50HZ 2KW ip20 The controller LFL1.322 GAS drueck: min 20mbar / max 360mbar 62 kg Ljdpfecvkaljx Aansta Monoblock burner cast aluminum Electronic control panel is a signal diagram showing the different stages of combustion and alarms, allows you to keep constantly under control in the proper burner operation Flame type QRA2 Software relay LFL1.322 Gas train with an appropriate adapter is set on the side of the burner Adjustable burner flange Damper actuators Connect quick connector for the power cord Automatic termination of the air when the burner is switched off Seat and gas safety valves The reduction of the gas pressure regulator The differential air pressure switch Controller minimum gas pressure Luc overall control.

Year of construction: 2009, condition: reconditioned (used), 4-SIDED 5-HEAD PLANER TOS SVITAVA LIGNUM 4-SIDED 5-HEAD PLANER TOS SVITAVA LIGNUM 5-HEAD PLANER 240 MM WITH A GROOVED TABLE AFTER A COMPLETE RENOVATION FWH 225mm 23kW total power Ltedpfx Aaondcg Nonja

Condition: repair required (used), functionality: not functional, workpiece weight (max.): 300 kg, grinding length: 2,000 mm, Used Cylindrical grinding machine TOS BHU 32A/2000 grinding diameter 320 mm, grinding length 2,000 mm, without electrics, in need of repair, ideal for companies specializing in general overhauls. Ltodswbiw Iepfx Aanja

Year of construction: 1988, condition: good (used), TOS SN 50 B (1988) Manufacturer: TOS Model: SN 50 B Year of manufacture: 1988 Type: Universal centre lathe Ledpfx Ajxl Tt Seansta Swing over bed: 500 mm Swing over cross slide: 270 mm Swing in gap: 700 mm Distance between centres: 1500 mm Bed width: 300 mm Spindle bore: 52 mm Spindle speed range: 22 – 2000 rpm Spindle nose: Camlock D1-6 Spindle motor power: 7.5 kW Longitudinal feed range: 0.04 – 2.24 mm/rev Cross feed range: 0.02 – 1.12 mm/rev Metric threads: 0.5 – 224 mm Inch threads: 56 – 0.25 TPI Module threads: 0.25 – 112 mm DP threads: 112 – 0.25 DP Tailstock quill diameter: 75 mm Tailstock quill travel: 160 mm Tailstock taper: Morse 5 Machine length: approx. 2800 mm Machine width: approx. 1100 mm Machine height: approx. 1300 mm Machine weight: approx. 2000 kg

Condition: used, Year of construction: 1987, Technical details: table diameter: 500 mm table height: 70 mm Ltjdpfx Aaou Nkm Eenoa rotatability of the table - manual/mechanic: ja ° weight of the machine approx.: 300 kg space requirements of the machine approx.: 0,92x0,650x0,19 m T-slots are 3 pcs longtitudinal and 1x transverse in the middle existing a=18mm h=30mm b=30mm c=13mm *

Condition: good (used), functionality: fully functional, Centerless Grinder BB10 ground diameter: 3 - 100 mm grinding wheel dimensions (diameter x width): 500 x 200 mm feed wheel dimensions (diameter x width): 300 x 200 mm Ltedpfx Aajxw Iqvenoa through-feed grinding without feed (maximum length): 320 mm plunge grinding (maximum length): 195 mm

Condition: good (used), Year of construction: 1994, functionality: fully functional, Electromagnetic belt separator Steinert length: 1500mm width: 900mm Year of manufacture: 1994 Protection class of magnetic housing IP44 Magnet power 2,2 kW; Material flow rate 1.8 m/s; Drive power 2,2 kW; Ljdpfxjvyuy Ho Aanota Control voltage 230 V; Operating voltage 3x400 V; Frequency 50 Hz; weight: 2200kg

Condition: used, Year of construction: 2001, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 322002252, feed length X-axis: 1,000 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, spindle speed (max.): 1,400 rpm, rapid traverse X-axis: 1,635 m/min, rapid traverse Y-axis: 1,635 m/min, rapid traverse Z-axis: 460 m/min, total height: 2,000 mm, total width: 2,000 mm, total length: 1,720 mm, table width: 360 mm, table length: 1,400 mm, table load: 300 kg, overall weight: 2,750 kg, workpiece weight (max.): 300 kg, The milling machine is in excellent condition. It has very few operating hours. The machine is universal – it can perform both face and gear hobbing operations (arbors included). A dividing head, used only once, is also included. Lodpfx Aaoxwnf Tonjta

Condition: ready for operation (used), Spindle bore: 60 mm Swing diameter over bed: 500 mm Center length: 1000 mm Dimensions: 3100x1400x1600mm Ljdoiqtzkepfx Aanjta

Condition: reconditioned (used), Year of construction: 2024, functionality: fully functional, grinding length: 1,500 mm, grinding diameter: 400 mm, Technical data - grinding length [mm] - 1500 - grinding diameter [mm] - 400 - range of table speed [mm/min] - 0 - 10 - smallest table travel [mm] - 0,001 - taper in tailstock sleeve {Morse no.] - 5 - grinding wheel dimensions [mm] - 500x80x203 - power of grinding wheel drive motor [kW] - 11 - power of grinding wheel drive motor [kW] - 3,5 - overall dimensions [mm]: length - 6650 width - 2300 (without desktop) height - 1800 - weight of machine tool [kG] - 6900 - central lubrication system; - Mitsubishi control system; - movement of the grinding wheel headstock - application of ball screw and servo motor; - table travel - use of ball screw and servo motor; Ltsdpevga Aysfx Aanea - headstock of the workpiece - use of a new motor along with stepless speed control controlled from the operator panel; - "electronic wheel" for precise raids in both servo X and Z axes, e.g., for set-up work; We also make machines with Siemens 828D or 840Dsl control. It is possible to make machines up to a grinding length of 2000 / 2500 / 3000 mm.

Condition: used, Year of construction: 1987, Technical details: max. pitch circle diameter: 360/24 mm Ltjdpfju Nlg Tox Aanja weight of the machine approx.: 46 kg centre height: 130 mm swivable: ja ° rotation movement: 360 Grad dimensions: 350 x 450 x 260 mm Application: For auxiliary work e.g. scribing of graduations. -dividing attachment with chuck Ø 125 in 360° pitch circle -clamping takes place via grid with index -pitch circle 24 -chuck: Ø 125mm, with revolving scale; through hole Ø 17mm; without jaws -base plate: size 260 x 300mm, with 2 clamping grooves WxL: 15 x 21mm - chuck key - 2 pieces groove stone *

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Swing dia over bed 400 mm Swing dia over crosss slide 220 mm Between centers 1500 mm Spindle hole 50 mm Spindle speed 12,5 – 3150 rpm Spindle power 5,5 kW Power required 16 kVA Ltsdpfx Aoxiymtoanoa Dimensions L x W x H = 2900 x 1000 x 2200 mm Weight cca 1600 kgs Accessories, features - 3 jaws chuck, D200 mm chuck - 4-fold tool holder - Tailstock - Display motor load - Rapid speed - Driwing system by clutch - Spindle break - Splash wall - Hardened and ground linear guides are in perfect condition - Steady rest - Coolant unit - Manual The machine is in great and original technical condition. It was barely used. No DRO system on it.

Condition: excellent (used), I am selling this machine, connected, can be tested. Max. workpiece diameter ..... 1600 mm Module ..... 16 - Power of the main electric motor ..... 12 kW Dimensions l x w x h ..... 4300 x 2000 x 3170 mm Machine weight ..... 18500 kg Ltjdpfx Asv Nqppsansa Can send a video of the machine, via whatsapp.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Demonstration machine BUB 63 CNC 3000 Centre height: 630 mm Centre distance: 3000 mm Ltodpfx Asv N D Hbsansa 1 grinding wheel: 500/380 x 100 x 203 mm

Condition: used, Technical details: clamping surface area: 630x400 mm no. of flutes: 8 rotatability of the table - manual/mechanic: 360 v. Hand ° weight of the machine approx.: 175 kg Angular table - machine table- machine clamping table for milling machine TOS such as FNG or FNGJ Ltodpfeu Nkrbox Aanea The frame is swiveable via hand wheel 360° (scale 360°) T-slots according to DIN 650 and 508 a=14mm; h=24mm; b=25mm; c=9mm foot plate: size 380x300mm with 6 clamping slots WxL=14x20mm *

Condition: excellent (used), functionality: fully functional, I am selling this machine, connected and can be tested. Can send a video of the machine via whatsapp. Swing diameter over bed: 1250 mm Swing diameter over slide: 940 mm Center distance: 5000 mm Spindle bore: 102 mm Ltjdpfx Aasv Nw D Hjnoa

Condition: used, Technical details: swing diameter: 200 mm centre distance: 450 mm cross travel: 245 mm longitudinal feed: 830 mm table speed: 0,05-4,5 stufenlos m/min revolution per minute: Schleifspindel 1780, 2050 U/min revolution per minute: Werkstückspindel 50-500 U/min dimensions of grinding wheel: 350x32x127 mm Table dimensions: 2200x280 mm Ltsdpfxsu Ng Dgs Aansa table swivelling to both sides: 9°vor+10°zurück Grad total power requirement: 6,0 kW weight of the machine ca.: 2,2 t dimensions of machine: 2,2x2,05x1,6 m Universal Center Grinding Machine without internal grinding device! - for precision grinding of outer, inner such as cone surfaces - feed of grinding headstock via hydr. or manual possible - table feed hydraulic stepless - grinding spindle swivelable with 60 degrees - workpiece headstock 90 degress swiveable with tapper MK4 - tailstock tapper MK 3 equipment: - dressing device/extruder - coolant tank incl. pump and supply i.D. *

Condition: excellent (used), functionality: fully functional, I am selling this lathe, connected, can be tested. Machine accessories. Can send a video of the machine via whatsapp. Ledpsv Nw A Nsfx Aaneta Swing diameter over the bed ..... 1050 mm Distance between centers ..... 6000 mm Swing diameter over the slide ..... 940 mm