Used Traction Battery for sale (10,548)

Condition: new, Year of construction: 2024, Working range Center distance 1000 mm Turning diameter over bed 356 mm Rotation Ø over support 220 mm Bed width 206 mm Travel paths X-axis travel 178 mm Z1-axis travel 92 mm Swivel range top slide ± 50° Main spindle Speed range, high 550 1/min - 3000 1/min Speed range, low 30 1/min - 550 1/min Spindle holder Camlock D1-4 Spindle bore 38 mm Spindle cone 5 MK Feed rate Feed X-axis 0.014 mm/rev - 0.206 mm/rev Feed Z-axis 0.043 mm/rev - 0.653 mm/rev Thread cutting Thread cutting, metric (37) 0.4-7 mm Thread cutting Whitworth (28) 4-56 TPI Tailstock Tailstock pinol diameter 45 mm Tailstock taper 3 MK Tailstock quill stroke 120 mm Tailstock cross adjustment ± 10 mm Drive power Codpfx Aeu Sklyjgkjgp Motor power main drive 4 kW Dimensions and weights Dimensions (length x width x height) 1.95 m x 0.75 m x 1.55 m Weight 880 kg

Condition: excellent (used), Year of construction: 2019, ACS Angelantoni Model: ACS WZH10-4080-2 BT Angelantoni Walk-in Climatic Chamber ACS WZH10-4080-2 BT Optimized for Battery Testing (Li-Ion) -40°C to +80°C Cjdpfxsyg I Eyj Agkjgp Description: For sale is a walk-in climate and environmental test chamber from the renowned manufacturer Angelantoni Test Technologies (ACS), model WZH10-4080-2 BT, year of manufacture 2019. The system is designed for demanding industrial, development, and research testing and is equipped with advanced safety features specifically tailored for battery and accumulator testing (e.g., lithium-ion). Special feature: Safety equipment for battery testing: The system is specially equipped for battery and accumulator testing, including: - Pressure relief flap for controlled pressure discharge in the event of a malfunction - Gas detection system for early identification of critical gas concentrations - Aerosol fire suppression system (SalgroMAG) → Ideal for lithium-ion testing Suitable for: - Batteries & accumulators (including lithium-ion) - Electronics & control units - Automotive components - Industrial & research tests - Endurance, aging, and stress tests Technical data (from nameplates & documentation) General: Model: WZH10-4080-2 BT Year of manufacture: 2019 Standards: CE, IEC/EN 60204-1 Design: Walk-in climatic chamber, double-door Test range: Temperature: –40 °C to +80 °C Relative humidity: 10% to 95% RH Electrical data: Supply: 400 V 3-phase + N + PE 50 Hz Rated power: approx. 37 kW Full load current: approx. 115 A Protection rating: IP54 Short-circuit strength: 10 kA Refrigeration system Refrigerant: R452A Charge: approx. 50 kg CO₂ equivalent: approx. 107 t Dimensions: External dimensions (approx.): Length: ~4.5 m Width: ~2.2 m Height: ~2.4 m Weight: approx. 3,800 kg Condition: used Scope of delivery: (See photo) (Technical data subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: excellent (used), Year of construction: 2004, Please read the technical specifications thoroughly. If you are considering this machine as a potential investment, we kindly request your complete credentials with an accurate telephone number and email address in order to submit an offer. We are offering an exceptionally high-quality precision lathe. In its class, this is arguably the best German lathe ever built. BOEHRINGER Precision Lathe Model DUE 500 Year of manufacture: 2004, incl. CE certificate and central lubrication Machine no.: T1022.2027-00 Centre height: 240 mm Swing over bed: 500 mm Swing over cross slide: 285 mm Centre distance: approx. 1,200 mm Turning length (effective): approx. 1,000 mm Bar capacity: 62 mm Spindle nose: DIN 55027 size 6 Spindle diameter: 100 mm Drive power: 11 kW Max. torque: 2,000 Nm 24 spindle speeds: 11.2 – 2,240 rpm 60 cross feeds: 0.03 – 28 mm/rev 60 longitudinal feeds: 0.06 – 56 mm/rev Tailstock quill travel: 190 mm Tailstock taper: MK 5 Space requirement: approx. 4,000 x 1,525 mm (L x W) Weight: approx. 4,300 kg Accessories included: - 3-axis digital readout HEIDENHAIN - Central lubrication - Electrically interlocked chuck guard - Coolant system - Chip protection rear wall - Röhm lathe chuck T 250 mm incl. various clamping jaws - Telescopic cover for leadscrew and support to bed - Machine lamp - Multifix C tool post + 4 holders - Live centre - Operating manual - Circuit diagram - Rapid traverse in longitudinal and cross slide Condition: Cjdpfx Agsw Rdthskegp The machine is in very good technical and visual condition. Backlash in cross slide: approx. 0.3 mm, top slide: approx. 0.15 mm Spindle nose runout: approx. 0.006 mm Bed geometry: deviation approx. 0.01 mm over 750 mm of bed length (measured on flat guideway with dial indicator towards the chuck) The following parts have been renewed: - Oil change - New hoses for central lubrication - New wipers - Key for engagement lever replaced - Locking pin for engagement interlock replaced Net price EXW. Delivery with our own truck can be offered for an additional charge.

Condition: reconditioned (used), Please read the technical specifications in full. If you are considering this machine as an investment, we kindly request your complete credentials including a valid telephone number and email address in order to provide you with an offer. We are offering an exceptionally good precision lathe here. In its class, this machine is perhaps the best German-built lathe ever made. BOEHRINGER Precision Lathe Model DUE 800 Year of manufacture: 1984 Machine No.: 04041.01-807 Centre height: 400 mm Swing diameter over bed: 820 mm Swing diameter over cross slide: 515 mm Distance between centres: approx. 2200 mm Effective turning length: approx. 2000 mm Bar capacity: 128 mm Spindle nose: DIN55022 size 11 Drive power: 30 kW Max. torque: 6300 Nm 24 spindle speeds: 7.1 – 1400 rpm 60 cross feeds: 0.05 – 28 mm/rev Cgjdpfxort T S Re Agkjp 60 longitudinal feeds: 0.06 – 56 mm/rev Rapid traverse in longitudinal and cross-slide Powered compound slide Tailstock quill stroke: 280 mm Tailstock taper: MK 6 Required space (LxWxH): approx. 6700x2500x2250 mm Weight: approx. 7,500 kg Accessories: - 3-axis HEIDENHAIN digital readout - Coolant system - Chip guard rear wall - Autoblock 500 mm hydraulic chuck with jaws - Telescopic cover for lead and feed shaft and support to bed - Machine lamp - Chip conveyor - Parat toolholder base incl. 11 holders - Extraction unit - 3-jaw steady rest with roller inserts (live) - Emergency stop - Chuck key - Live centre - Operating manual Condition: The machine is in very good technical and optical condition. Backlash on top slide is 0.1 mm and on cross slide 0.15 mm. Machine geometry is also very good (verified with dial gauge) Measured on flat-bed guideways with dial gauge towards the chuck. Bed wipers replaced, gearbox input shaft axial play compensated and bearings replaced, drive pins motor/gearbox side renewed, shaft seals on apron renewed, various bearings replaced. The machine can be demonstrated under power. Function videos can be provided on request.

Year of construction: 2019, condition: good (used), Weiss Model: WK 10/40-80 Modular Environmental Test Chamber Weiss WK 10/40-80 Special equipment for battery testing: The climate test chamber is equipped with enhanced safety features for battery and cell tests (e.g., lithium-ion): • Pressure relief flap for controlled pressure discharge in the event of a fault • Gas warning system for early detection of critical gas concentrations • Fire suppression system with SalgroMAG aerosol extinguishing generators This equipment significantly increases safety during battery testing and supports use in development and test environments (subject to customer-specific safety concept/BMS). Description: For sale is a professional environmental test chamber by Weiss Technik, Model WK 10/40-80, year of manufacture 2019. The unit is used for temperature and climate testing, making it ideal for industry, research, development, and quality assurance. The system enables temperature and humidity testing over a wide range and is designed for continuous operation in industrial and development laboratories. The chamber is particularly suitable for: - Functional and service life tests - Material and component testing - Pre-aging and climate simulation - Conditioning of samples - Testing of batteries and accumulators (e.g., lithium-ion) under defined climate conditions (with the appropriate customer-side safety concept/BMS) Operation is via a modern S!MPAC® control system with web panel; programs can be stored and automated. The unit was in use until recently and is fully functional. General Information: Manufacturer: Weiss Umwelttechnik GmbH Model: WK 10/40-80 Year of manufacture: 2019 Condition: used, functional CE marking: available Made in Germany Control: S!MPAC® control Web panel / touch operation Program and time control possible Temperature & Climate: Temperature range: −40 °C to +80 °C Temperature accuracy: ± 1 K Humidity range: 10% to 95% rH Humidity accuracy: ± 5% Dimensions: External dimensions (W×D×H): approx. 3300 × 5000 × 2500 mm Internal dimensions (W×D×H): approx. 3000 × 2200 × 1500 mm Media & Systems: Spray system: Water pressure 3 bar Compressed air connection: min. 5 bar Refrigerant: R449A Electrical Data: Power supply: 3/N/PE, 400 V AC ±10%, 50 Hz Rated power: approx. 44.9 kW Rated current: approx. 74 A Weight: approx. 3,900 kg Codpjygvw Refx Agksgp Scope of delivery: Environmental test chamber Weiss Technik WK 10/40-80 Control system / web panel Operating manual (German) Nameplate & documentation Condition: used Scope of delivery: (see picture) (Modifications and errors in technical data and specifications excepted!) For further information please feel free to contact us by phone.

Condition: ready for operation (used), functionality: fully functional, battery capacity: 625 Ah, battery voltage: 48 V, overall weight: 1,500 kg, No reserve price – guaranteed sale to the highest bidder! MACHINE DETAILS Battery voltage: 48 V Battery capacity: 625 Ah Battery condition: very good, measured at 51.76 V Battery type: 5PzS625 Dimensions & Weight Dimensions (L x W x H): 83 x 63 x 63 cm Weight: 1,500 kg EQUIPMENT Battery from former Linde service Last service valid until 10/2026 All dimensions are approximate. No liability is accepted for typing or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible on site with large forklift at your own risk. Codpfoyk Ep Rsx Agksgp Collection ONLY upon receipt of email payment confirmation! Collection WITHOUT prior notification Monday to Friday 7:00–16:30. If the mast is too high for transport, it can be removed on request. In case of delayed collection, a storage fee of €20 per machine per day will apply (payment must be made before collection).

Condition: ready for operation (used), functionality: fully functional, battery capacity: 750 Ah, battery voltage: 48 V, overall weight: 1,000 kg, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Battery voltage: 48 V Battery capacity: 750 Ah Battery type: 6 PzS 750 Measured battery output: 51.23 V Cjdpfx Asyk Ekuogkjgp Dimensions & Weight Dimensions (L x W x H): 83 cm x 73 cm x 63 cm Weight: 1,000 kg FEATURES Battery from former Still service inventory All dimensions are rounded values. No liability is accepted for typographical or measurement errors. COLLECTION TERMS Side loading up to 5 tons possible on site using a large forklift at your own risk. Collection ONLY with email payment confirmation! Collection WITHOUT prior appointment Monday to Friday, 7:00 a.m. – 4:30 p.m. An excessive mast height can be dismantled for transport upon request. If collection is not made within the specified period, a storage fee of €20 per machine per day will be charged (payment due before collection).

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: 417726150010, battery capacity: 750 Ah, battery voltage: 48 V, overall weight: 1,040 kg, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Battery Type: 6PzS750 Battery Voltage: 48 V Battery Capacity: 750 Ah Battery Output: 49.14 V Cgedpjyk Ed Uofx Agkep Dimensions & Weight Dimensions (L x W x H): 83 x 73 x 63 cm Weight: 1,040 kg EQUIPMENT Battery sourced from former Still Service All dimensions are rounded values. No liability is assumed for typographical or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible on site with a large forklift at your own risk. Collection ONLY with email payment confirmation! Collection WITHOUT appointment Monday to Friday 7:00 am – 4:30 pm. If the mast is too high for transport, it can be dismantled upon request. In case of late collection, a storage fee of €20 per machine per day will be charged (payment must be settled before pickup).

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, machine/vehicle number: 053287797, battery capacity: 775 Ah, battery voltage: 48 V, overall weight: 1,118 kg, No reserve price – guaranteed sale to the highest bidder! MACHINE DETAILS Csdpfx Aoyk Ednegksgp Battery voltage: 48V Battery capacity: 775Ah Energy: 28.3 kWh Dimensions & Weight Dimensions (L x W x H): 122 x 43 x 79 cm Weight: 1,100 kg FEATURES Battery from former Linde service stock All measurements are approximate values. No liability is assumed for writing or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t is possible with a large forklift on site at your own risk. Collection ONLY with email payment confirmation! Collection WITHOUT prior notice Monday to Friday 7:00 am – 4:30 pm. An overly high mast can be dismantled for transport upon request. If not collected within the agreed period, a storage fee of €20 per machine per day will be charged (payment must be settled before collection).

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: 996294, battery capacity: 625 Ah, battery voltage: 48 V, overall weight: 1,500 kg, No reserve price – guaranteed sale to the highest bidder! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 830 x 630 x 630 mm Weight: 1,500 kg Battery voltage: 48 V Battery capacity: 625 Ah Battery type: 5PzS625 Battery performance: measured at 51.38 V EQUIPMENT Battery from former Linde service All dimensions are rounded figures. No guarantee is given for typographical or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible with large forklift on site, at buyer’s own risk. Cgsdpfx Agsyk Ecwokep Collection ONLY with email payment confirmation! Collection WITHOUT prior appointment Monday to Friday, 7:00–16:30. If the mast is too high for transport, removal can be arranged on request. In case of late collection, a storage fee of €20 per machine per day will apply (payment due before pickup).

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, machine/vehicle number: 053423392, battery capacity: 930 Ah, overall weight: 2,178 kg, No reserve price – guaranteed sale to the highest bidder! MACHINE DETAILS Battery: 80 V 930 A Nominal energy: 70.7 kWh Battery condition: very good, measured at 83.39 V Dimensions & Weight Dimensions (L x W x H): 102 x 100 x 80 cm Weight: 2,178 kg EQUIPMENT Battery from a former Linde service unit All measurements are approximations. No liability is assumed for typographical or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible with a large forklift on site at your own risk. Collection ONLY with e-mail payment confirmation! Collection WITHOUT prior notice Monday to Friday 7:00 am–4:30 pm. Codpjyk Ebmefx Agksgp An overly high mast can be dismantled for transport upon request. If not collected within the agreed timeframe, a storage fee of €20 per machine per day will be charged (payment must be settled before collection).

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, machine/vehicle number: 043351704, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Dimensions (L x W x H): 79 x 31 x 79 cm Weight: 500 kg Battery: 48 V, 625 A Battery output: 57.7 V Power: 11.3 kW EQUIPMENT Battery from former Linde Service All dimensions are approximate. No liability is accepted for typographical or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible with a large forklift on site at your own risk. Collection ONLY with e-mail payment confirmation! Collection WITHOUT prior appointment Monday to Friday 7:00–16:30. A mast that is too tall can be dismantled for transport upon request. If pickup is not completed on time, a storage fee of €20 per machine per day will be charged (outstanding payment must be made before collection). Csdpjyk D Tuefx Agkegp

Condition: like new (used), Year of construction: 2013, operating hours: 2,668 h, load capacity: 1,200 kg, lifting height: 2,850 mm, fuel type: electric, mast type: duplex, construction height: 2,020 mm, Manufacturer + model: BT SWE 120 S Atex *EX* Mitrex 2D / Zone 21 Mast: 2F2850 ID: 23021.7862 Mast: 2F2850 Lowered height: 2020 mm Lifting height: 2850 mm Capacity: 1200 kg Year: 2013 Operating hours: 2668 hours Battery: NEW * 24v / 300ah * Year 2023 Options: VERY unique counterbalance stacker in EX version!! *EX* Mitrex! System = ATEX 94/9/EC Gas group = IIIB (non-conductive dust) Type = 2D (allowed in Zone 21) Temperature class = T4 (135 °C) Equipped with: - FFL mast – 2-stage - Cantilever adjustable forks Cedpfx Agsx Rt N Hokegp - SUITABLE for all types of pallets

Condition: like new (used), Year of construction: 2013, operating hours: 2,071 h, load capacity: 1,200 kg, lifting height: 2,850 mm, fuel type: electric, mast type: duplex, construction height: 2,020 mm, Manufacturer + model: BT SWE 120 S Atex * EX * Mitrex 2D / Zone 21 Mast: 2F2850 ID: 23021.7904 Mast: 2F2850 Lowered height: 2020 mm Lifting height: 2850 mm Capacity: 1200 kg Year: 2013 Operating hours: 2071 h Battery: NEW * 24v / 300ah * Year 2023 Options: VERY unique CONTRA stacker EX version!! * EX * Mitrex!!!!! System = ATEX 94 / 9 / EC Gas group = IIIB (non-conductive dust) Type = 2D (For use in Zone 21) Temp class = T4 (135 °C) Equipped with: - FFL mast – 2-stage - Freestanding adjustable forklift forks - SUITABLE for all types of pallets Cgjdpfx Aox Rt Nyegkop

Condition: new, functionality: fully functional, machine/vehicle number: 1.161-070.0, working width: 510 mm, area performance: 2,805 m²/h, overall weight: 345 kg, warranty duration: 24 months, water tank capacity: 70 l, battery capacity: 105 Ah, Technical specifications: Condition - NEW! Catalog number: 1.161-070.0 Drive type: Battery Drive: Traction motor Brush working width (mm): 510 Vacuum working width (mm): 900 Fresh/dirty water tank capacity (l): 70 / 75 Theoretical area coverage (m²/h): 2805 Battery (V / Ah): 24 / 105 Charger power supply (V / Hz): 95 – 253 / 50 – 60 Brush speed (rpm): 180 Brush contact pressure (g/cm² / kg): 13 / 20 Water consumption (l/min): max. 2.3 Sound pressure level (dB(A)): 66 Gross weight (kg): 345 Weight without accessories (kg): 100 Dimensions (L × W × H) (mm): 1310 × 590 × 1060 Scope of delivery and equipment: SONNENSCHEIN 12V 105Ah GEL BATTERIES (2x). NEOS 24V 10A EXTERNAL CHARGER 900mm V-shaped suction bar with oil-resistant polyurethane rubbers 510mm red disc brush - medium hard Codsxn I Sujpfx Agksgp Features: Powerful drive Automatic water stop Solenoid valve 2-tank system Batteries and charger included: - Sonnenschein 105Ah batteries + Neos 24V charger included in the set - Easy charging at any standard outlet. - Mains-independent use without tripping hazards. Advantages: - Self-explanatory symbols and a clear control panel. Short training phases. Easy operation thanks to a small number of yellow-coded controls. - Robust construction with integrated disc brush head. High surface performance thanks to a large working width. Brush changes are made via pedal ejection. - Particularly maneuverable machine. Good overview of the surfaces to be cleaned. Easy transport. Key features: - Thanks to its slim and compact design, our battery-powered ride-on scrubber-dryer BD 50/70 R Bp Pack Classic with disc brush technology is extremely easy to maneuver and transport – even in elevators, for example. This positions the affordable entry-level model, powered by powerful 105 Ah batteries, as a viable alternative to walk-behind machines (batteries and a suitable charger are included).

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 6,980 h, load capacity: 1,500 kg, lifting height: 6,800 mm, free lift: 1,960 mm, fuel type: electric, mast type: triplex, construction height: 2,860 mm, battery capacity: 1,000 Ah, remaining battery capacity: 100 %, battery voltage: 24 V, DGUV certified until: 02/2027, tire condition: 100 %, Equipment: CE marking, UVV, full service history, lighting, sideshift, Still RX 50-15 Electric Three-Wheel Forklift with the following specifications: · Lifting capacity: 1,500 kg · Lift height: 6,800 mm · Overall height: 2,860 mm · Operating hours: 6,980 · Year of manufacture: 2015 STILL 1.5 ton electric three-wheel forklift, open cabin, brand new battery, new non-marking tires (optional black tires available), triplex mast with full free lift, side shifter, mini levers, fork length 1,200 mm, new charger included. Includes 500-hour service according to STILL manufacturer specifications and valid UVV safety inspection at time of sale. Cedpfxox I Ec Ho Agkjgp Viewing, demonstration, and test drive available by appointment. Sale exclusively to commercial customers; subject to prior sale, errors, and typographical mistakes. We can deliver your new forklift cost-effectively with our own ramp low-loader (transport costs on request). Further information and offers are available on our website.

Condition: like new (used), Year of construction: 2018, operating hours: 6,472 h, load capacity: 2,000 kg, lifting height: 4,650 mm, fuel type: electric, mast type: triplex, construction height: 2,130 mm, Manufacturer + model: LINDE E 20 L - 386 / 02 evo * EX * Proplan 2GD / Zone 1-21-22 * Mast: 3F4650 ID: 26037.5931 Category: Used Mast: 3F4650 Lowered height: 2130 mm Lifting height: 4650 mm Capacity: 2000 kg Year: 2018 Hours: 6472 hours Battery: Completely NEW * 48v /625Ah * Built 02/2026 Options: CONTAINER specifications!! * EX * Proplan!!!!! System / Certificate = INERIS 08 ATEX 3022 X Type = Cat 2G (approved for ZONE 1) Gas group = IIB Temperature class = T4 Type = Cat 2D (approved for ZONE 21 - Dust) Gas group = IIIB Temperature class = T 135 °C - IP 6X Equipped with: - Joystick drive forward/reverse - Triplex FFL mast - Front spotlight - Flashing beacon Cjdeyl Rqvjpfx Agksgp - Blue spot safety light - New tyres (ATEX specs)

Condition: used, Year of construction: 2006, functionality: fully functional, Equipment: rotational speed infinitely variable, Manufacturer: 600 Lathes Model: Harrison V350 Centre Height: 170 mm Swing over Bed: 350 mm Swing over Cross Slide: 196 mm Swing in Gap: 535 mm Width in front of Face Plate: 165 mm Distance between Centres: 650 mm Spindle Speeds (stepless via potentiometer across 3 ranges, with digital readout): 15 - 340 rpm 45 - 1010 rpm 150 - 3250 rpm Spindle Mount (Camlock): D1-4 Spindle Bore: 54 mm Spindle Motor: 7.5 kW Carriage Guideway Width: 318 mm Cross Slide Travel: 250 mm Top Slide Travel: 140 mm Tailstock Quill Travel: 140 mm Tailstock Quill Taper: MT4 Quill Diameter: 63 mm Metric Version Machine Threads: Metric: 0.2 - 14 mm (51) Imperial TPI: 2 - 56 (56) Module: 0.2 - 3.5 (20) Diametral Pitch: 8 - 56 (20) Drive Power: 7.5 kW Equipment: 3-Axis Digital Readout 3-jaw Chuck Röhm D:200 mm 4-jaw Chuck D:160 mm Collet Chuck System Steady Rest 4-position Quick Change Toolpost Codpfx Agsxcuuleksgp Live Centre Chuck Guard Additional Chip Shield on Carriage Coolant System Rear Splash Guard Machine Documentation incl. Schematics Dimensions: Floor to Spindle Centre: 1050 mm Overall Length: 1900 mm Overall Width: 1100 mm Overall Height: 1300 mm Weight: 1350 kg The machine can be demonstrated under power on site by arrangement. All details without guarantee. Errors and prior sale reserved.

Condition: good (used), functionality: fully functional, Used L + Z lathe with 3-axis digital readout Manufacturer: WEILER Type: Condor 81 B Machine. No.: 87596 Year of manufacture: approx. 1987 Center distance: 750 mm Turning diameter over bed: Ø 330 mm Center height above bed: 165 mm Turning diameter over support: Ø 180 mm Center height above support: 90 mm Spindle bore: Ø 40 mm Tailstock inner taper: MK 3 Pinol adjustment: 110 mm Spindle speed: 45 - 2800 rpm. (16 steps + 2 motor speeds) Feed range: 0.016 - 0.50 mm/rev Drive power: 1.6 + 3.2 kW (drive motor stage 1+2) Mains connection: 400 Volt, 50 Hz Connected load: 32 kW Control voltage: 42 Volt Equipment + accessories: - 3-axis digital readout from Heidenhain type VRZ 750 - Quick clamping device and various collets + draw tube - 3-jaw power chuck Ø 160 mm Forkardt F160 - Multifix size B quick-change steel holder - LED work light - Bed stop - Automatic longitudinal & face feeds - Electro-mechanical spindle brake switchable - 2x emergency stop - Electrical feed key query (via sleeve with button) - Coolant tank with pump in the machine base - Folding chuck guard - Splash guard - Circuit diagram - Adjustable machine feet Space requirement: 1850 x 950 x 1400 mm (L x W x H) Weight: approx. 1100 kg This new generation of Weiler lathes is very user-friendly and robust. Machine can be demonstrated on site under power. Cgodpfx Asvadqzogkep All information without guarantee. Subject to prior sale.

Condition: used, functionality: fully functional, Year of construction: 2010, operating hours: 6,962 h, load capacity: 1,500 kg, lifting height: 3,300 mm, load center: 500 mm, fuel type: electric, mast type: simplex, construction height: 2,160 mm, battery capacity: 500 Ah, remaining battery capacity: 100 %, battery voltage: 48 V, fork carriage width: 920 mm, fork length: 1,200 mm, tire condition: 100 %, front tire type: cushion tires (black), rear tire type: cushion tires (black), drive type: Elektro, Electric 3-wheel forklift Chassis number: 0 Load centre: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Standard Condition: Refurbished without warranty Technical condition: Very good Front tyres type: Superelastic Front tyres size: Brand new Front tyres condition: New Rear tyres type: Superelastic Rear tyres size: Brand new Rear tyres condition: New Battery voltage: 48V Battery capacity: 500Ah Battery manufacturer: Brand new 2026 Battery type: PzS Battery year of manufacture: 2026 Battery condition: New Description: Good operational condition, as returned from the previous owner Side shifter, 3rd valve, rear working light, front working light, road legal equipment, safety light, Cgodpfxoxu R R He Agksp

Condition: excellent (used), Center height 125 mm Center width 500 mm Cedstzxh Tjpfx Agkegp Speed 45 - 3000 rpm Feed rate 4 - 260 mm/min Spindle nose Camlock D1-3" Tailstock cone MK 2 Turning diameter over bed 250 mm Turning diameter over face slide 120 mm Top slide travel 100 mm Cross slide travel 180 mm Dimension (W x D x H) 1500 x 850 x 1300 mm Weight approx. 950 kg

Condition: good (used), Year of construction: 2004, ELBERON Multipurpose Lathe Type: GRC300X750 Chuck 130 mm In good condition. Cedpfx Aswah Rqegkegp See data sheets for details.

Condition: good (used), Year of construction: 1974, LZ-Lathe Fabr.Boley Type: 6 LZ Year 1974 Cgsdpsqw U Uwsfx Agkep Center height : 140 mm center distance : 500 mm spindle speed : 28-3550 rpm spindle bore : 32 mm collet chuck device, 3-jaw chuck, quick-change tool holder Parat. Machine documentation available, machine can be demonstrated under power.

Condition: good (used), Year of construction: 1967, LZ-Lathe Fabr.WEIPERT TYPE:UD 500 e year 1967 with digital readout ,top support feed tool holder MULTIFIX size C ,Forkardt chuck 315 mm. Cgedpfsu Rd H Isx Agkjp Center height : 250 mm Center width : 1500 mm spindle bore : 65 mm Spindle speed : 14 -1400 rpm Machine is in good condition .

Condition: good (used), Year of construction: 2010, LZ-Lathe Fabr.JET Type :GHB-1330 Bj.2010 Cgjdpjqwgzqjfx Agkjp with 3 ash digital indicator, 3 jaws lathe chuck DM 160 mm tool holder Multifix size A, 2 steady rests coolant device. Turning diameter overbed: 330 mm Turning diameter over face: 197 mm Center width: 750 mm Spindle speeds: 70-2000 rpm spindle bore : 38 mm Machine in good condition from the training workshop Machine documentation available .