Used Transformator for sale (649)

Condition: used, Year of construction: 2005, functionality: fully functional, 630 kVA transformer station, year of manufacture 2005, Bockenem UK1700-30, 630 kVA oil transformer, 20kV±2x2.5%/400 V, AREVA, DCU3834 with HV plug-in bushings AK, LV Pfisterer terminals. Dodpexzq Dtjfx Addowf

Condition: excellent (used), Year of construction: 2013, x-travel 1000 mm y-travel 550 mm z-travel 500 mm CNC-control Fanuc Oi-MD table-size 1.100 x 500 mm max. table load 700 kg Dwjdpfx Adexvdtwsdjf spindle taper ISO BT-40 spindle turning speed range 10.000 U/min feed stepless 24.000 mm/min rapid traverse 36/36/30 m/min drive capacity - spindle motor 15/11 kW tool change unit 24 coolant IKZ 20 bar voltage 400 V total power requirement 30 kVA weight of the machine ca. 6,5 t dimensions of the machine ca. 3,35 x 2,20 x 2,67 m chip conveyor 2,40 x 1,50 x 1,40 m filter unit 0,90 x 1,40 x 1,30 m Transformer 0,60 x 0,55 x 0,55 m - Serial No..:M281361B5N D - Machine ON: 21,011 h - NC-Indexing Device Manufacturer KITAGAWA, (Call by M-Command) - control: FANUC Oi-MD - Internal coolant supply through spindle 20 bar - Chip conveyor

Condition: excellent (used), Year of construction: 2013, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 20 m/min, controller manufacturer: Brother, controller model: CNC-B00, table width: 400 mm, table length: 800 mm, table load: 250 kg, spindle speed (max.): 16,000 rpm, - Number of axes : 4 MILLING SPINDLE - Tool holder type : BT30 - Spindle power : 7,4 / 4,9 [kW] - Spindle speeds : 16.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 700 x 400 x 300 [mm] - Rapid traverses rates (X/Y/Z) : 50 / 50 / 50 [m/min] - Cutting feed rates (X/Y/Z) : 10 / 10 / 20 [m/min] - Distance table / spindle nose (min./max.) : 180 - 480 [mm] TOOL CHANGER - Auto. Tool Changer type : Umbrella - Tool magazine capacity : 21 - Tool exchange time : 1,4 [sec] TABLE - Table dimensions : 800 x 400 [mm] - Maximum weight upon table : 250 [kg] POWER SUPPLY - Supply voltage : 220 [V] - Total installed power : 9,5 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.050 x 2.207 [mm] - Machine height : 2.592 [mm] - Machine weight : 2.400 [kg] EQUIPMENT - CNC : Brother CNC-B00 - Interface : Ethernet / USB - 3 colors status lamp - Prepared for robot loading : right handside - Type of divisor : full 4th axis * Manufacturer : LEHMANN EA-510 * Travel 4th axis : 360 [°] Dsdpfx Adeulwztedewf * Indexing precision 4th axis : 0,001 [°] * center height : 150 [mm] - COOLANT TANK - Coolant through spindle * with high-pressure pump : 15 [bars] - Chips conveyor : Rear HAKUSAN - Oil mist extractor : SARA UC1SD - Electric transformer : 400 / 220 [V]

Condition: used, Year of construction: 2007, machine/vehicle number: L151804, Nakamura-Tome NTM3 lathe together with a 6-meter IRCO SiMag Breuning bar feeder. The machine has been serviced throughout its life by Abplanalp service, who also disconnected it and prepared it for transport after production was finished. Dsdpfoxg Nb Isx Addewf We took it in as a trade-in with plans to start some production, but it turned out to be too large for our needs – so we never even connected it since then. Technical details (from manufacturer): • Year of manufacture: 2007 • 11-axis Nakamura-Tome Super NTM3 • 2 spindles, 3 turrets • Every second tool driven • Control system: Fanuc 16i-TB • Main spindle: 15 kW, up to 4500 rpm • Sub spindle: 11 kW, up to 5000 rpm • Max turning diameter: 190 mm • Bar capacity: 65 mm • Machine weight: 12,000 kg Full documentation included: all manuals and schematics originally supplied with the machine. Additional equipment: • Parts catcher • Parts conveyor • Bar loader: IRCO SiMag • Electrical transformer • IRCO SiMag Breuning bar feeder (6m)

Condition: used, mileage: 3,93,085 km, power: 315 kW (428.28 HP), gearing type: automatic, fuel type: diesel, color: silver, overall weight: 26,000 kg, empty load weight: 12,527 kg, maximum load weight: 13,473 kg, tire size: 13R22.5, axle configuration: 6x6, number of seats: 2, first registration: 09/2016, next inspection (TÜV): 12/2025, emission class: euro6, brakes: engine braking, suspension: steel-air, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 1,000 mm, driver cabin: day cab, wheelbase: 3,600 mm, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, ClassicSpace cab, Mercedes PowerShift 3, staff house, 1x comfort seat, heated seat, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, air horn, ABS (anti-lock braking system), traction control (ASR), constant throttle, PTO, differential lock, fog lights, beacon, leaf-air suspension, trailer coupling with air, light, hydraulic connections, sliding tarpaulin, underride protection, swinging tailgates, roof hatch, green environmental badge. Wheelbase: 3600 mm. Body: Meiller 3-way tipper body with sliding tarpaulin. This vehicle features 6x4 drive, with optional Hydraulic Auxiliary Drive (HAD) for the front axle, transforming it into a 6x6 as needed! Hydraulic Auxiliary Drive (HAD), skid plate for HAD high-pressure lines, 8t front axle, rear axle crown wheel 300 planetary 13.4t, pipe fracture safety device for the brake system, electronic brake system with ABS and ASR, disc brakes with full protection on front and rear axles, switchable ABS, condensate monitoring for compressed air system, front axle stabilizer, residual heat utilization, construction site filter, ClassicSpace, comfort closing system, off-road driving program, rain/light sensor, Mercedes PowerShift 3, pre-installed for toll system, LED daytime running lights, tank capacity: 290l, high performance engine brake, transmission oil cooling, Meiller 7-piston pump type 275, ESP, lane departure warning system, auxiliary drive MB 131-2c pump. Dedpfx Adow Spb Hjdowf Loading height approx. 1,510mm! Technically permissible gross combination weight: 80,000kg! Matching Meiller tipper trailer -88693- available at extra cost! ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to change, prior sale, and errors!

Condition: used, Electric generator set of 2000 KVA (SDMO - 16 cylinders) in very good condition, professionally dismantled, with less working hours (actually it was a backup for a factory) + transformer SREE 2000 KVA + full electric cabinets and management of this big power. Price on request. Dwedpodlumysfx Addef And we also have the Electric generator set of 200KVA

Year of construction: 2023, condition: new, Field of application: Construction Attachment suited for: Loaders Dsdsph Rndjpfx Addswf The wheel loader quick hitch transforms a wheel loader from a dedicated bucket or forks machine to a multi-tasking universal machine. They can be manufactured to suit Z Bar and IT type wheel loaders. We can manufacture for every brand and models, for detailed information please contact us.

Condition: used, TECHNICAL DETAILS - Number of axes : 2 Djdpfx Aexz Hrgoddewf MAIN SPINDLE - Spindle nose : A2-6" - Spindle power : 11 [kW] - Spindle speeds : 50- 6.000 [rpm] - Max. bar diameter : 60 [mm] - Max. turning diameter : 430 [mm] - Max. diameter on bench : 580 [mm] - C axis indexing precision : 0,001 [°] TURRET - Number of positions : 12 - Z stroke : 390 [mm] - X stroke : 260 [mm] - Tool type : V12 POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 38 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.200 x 1.734 [mm] - Machine height : 1.839 [mm] - Machine weight : 3.400 [kg] MACHINE HOURS - Number of hours under power : 23.682 [h] - Number of working hours : 11.795 [h] - Number of spindle hours : 7.225 [h] EQUIPMENT - CNC : OKUMA OSP-P200 LA - Interface : Ethernet / RS232 / USB - Interactive programming : Advanced One Touch IGF-L V302A - 3 colors status lamp - Coolant tank - Chips conveyor : Droite MAYFRAN - Tool probe : manuel - Parts catcher - Bar loader : FMB 5-55 /3200 - Electric transformer - Collet chuck : Nann KSF 40/6 -6000 t/min - Collet chuck : TYPE 173E/48F Ø de barre max 42 mm

Condition: new, Year of construction: 2021, operating hours: 1 h, functionality: fully functional, spindle motor power: 5,500 W, turning length: 210 mm, spindle speed (min.): 6,500 rpm, turning diameter: 38 mm, overall weight: 3,600 kg, total length: 210 mm, input voltage: 400 V, power of the servo motor: 2,200 W, NEW, NEVER USED, ZERO TIME MACHINE! The machine now under power, ready to use with LNS Alpha 552 Bar feeder and Siemens 828D controller The machine is NEW, never used but ready to test, under electrical power. Included is the original chip conveyor, chip container, transformator and LNS bar loading magazine. Dwsdpjxvqqcjfx Addjf 7 axis, 5 driving tools, etc... Trasport and installation are FREE inside the EU! We will deliver the machine to your site, fully operational! You only need to provide the space, air and electrical connections, and a crane to lift the machine! Payment in installments is also possible. NEUE, UNBENUTZTE, LAUFZEITFREIE MASCHINE! Die Maschine ist betriebsbereit und mit dem LNS Alpha 552 Stangenvorschubgerät und der Siemens 828D Steuerung ausgestattet. Sie ist neu, unbenutzt und kann sofort getestet werden. Der originale Späneförderer und das LNS Stangenmagazin sind im Lieferumfang enthalten. Transport und Installation innerhalb der EU sind kostenlos! Wir liefern die voll funktionsfähige Maschine direkt zu Ihnen! Sie benötigen lediglich Platz, Druckluft- und Stromanschlüsse sowie einen Kran zum Anheben der Maschine. Ratenzahlung ist möglich.

Condition: new, Year of construction: 2021, functionality: fully functional, type of input current: AC, overall weight: 2,850 kg, input voltage: 9,500 V, input frequency: 50 Hz, nominal power (apparent): 1,250 kVA, New never used TMC IEC 60076-11-2018. Year of production 2021. 1250KVA transformer. Dwedpfx Aexwdmmjddsf 5 available

Condition: used, The HERBOLD Plastkompaktor is a system for agglomerating films, fibres, chips, dust and flakes. Dwedpjxgtx Djfx Addjf Poorly free-flowing waste is transformed into an agglomerate with a high bulk density and good flowability, which can therefore be fed directly into extruders and injection moulding machines. The system for sale has a main motor with 110 kW drive power and a throughput of 600 to 2000 kg/h depending on the feed material. All thermoplastics can be processed, even sensitive materials such as PET, PA and bioplastics can be agglomerated without thermal damage or discolouration. The system consists of the feeding device with silo, the compactor, a secondary granulator with sifting and fines return. On request, pre-shredding can be offered that is customised to the task at hand Trials can be carried out in our technical centre for suitability tests and sampling. We are the manufacturer of this system and can guarantee service and spare parts supply. The system is available at short notice!

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 020313L, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, pressure: 7 bar, Description: Solid steel construction for high machine stability. Workpiece feed via sliding transport chain with plastic plates. Upper pressure fitted with two rows of rubber-coated rollers. Manual adjustment of upper pressure with automatic positioning of the units according to the changed workpiece thickness. Mechanical digital display of panel thickness. PLC for on/off control of the motor and glue pot. Glue pot with standby function for temperature control. Start/stop function for all motors. End trimming unit for 3 mm edging rolls. Support tray for edging rolls with up to 800 mm diameter. Central dust extraction. Roller rail as workpiece support along the entire machine. Safety cover over all processing units. Control panel, including emergency stop and lockable main switch. Transformer for 24V auxiliary circuit. Jointing milling unit before the gluing section, for preparing the workpiece edge for adhesive application. With adjustable infeed fence. Maximum material removal 2 mm. 2 motors at 1.1 kW each, 12,000 rpm, max. material removal 2 mm, extraction port Ø 120 mm, incl. 2 WIDIA cutting tools. Gluing section for hot-melt adhesive with fast heating and adhesive application roller. System for temperature control and recycling of excess hot-melt adhesive. Power requirement 3.5 kW, capacity 1.5 kg, heating time approx. 15 min., depending on ambient temperature and adhesive. End trimming unit With 1 saw blade for trimming front and rear edge overhangs at a 90° angle, flush to the workpiece. Trimming for the front and rear overhangs can be controlled individually as needed. Motor: 0.35 kW. Saw blade speed: 12,000 rpm. Flush milling unit With 2 motors for milling a radius or chamfer on the top, bottom, and/or front edge. Vertical and horizontal motor adjustment on hardened steel guide rails and ball bearings. Three manually adjustable positions for different edge thicknesses. Motor not tiltable. Unit complete with WIDIA cutting tools 2/3 mm. 2 motors, 0.55 kW each, 12,000 rpm. Diamond cutting tools, 68mm Z6, R=2. Profile scraper knife Flat scraper knife Buffing unit Technical data: Edging strip thickness (manual feed) max: 5x45 mm Pre-milled panel thickness: 10 - 40 mm Unmilled panel thickness: 10 - 60 mm Max. height melamine edging: 65 mm Max. height ABS edging: thickness 0.4-2 mm = 65 mm; thickness 2-3 mm = 40 mm Max. edge overhang top/bottom: 2 mm each Minimum workpiece width with roll material: 90 mm Minimum workpiece length with roll material: 160 mm Dwsdpoxn Hzbofx Addsf Adhesive temperature: 190°-210° Feed speed: 8 m/min Inverter: 200 Hz Compressed air: 7 bar Extraction nozzle Ø: 2x 60 mm CE standard

Condition: new, Year of construction: 2025, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE COMPACT series Stationary Concrete Batching Plants provide satisfaction of all levels need with practical and effective solutions. Stationary concrete batching plants can easily and efficiently reach high capacity production of homogeneous concrete mixture. COMPACT series have easy operating system and lowest investment costs. In addition, the plant provides the use of enterprise resources accurately, so that gaining time-saving will transform to more earnings. . TECHNICAL SPECIFICATIONS: Model: COMPACT 110 Production capacity: 100 m3 Mixer type: Twinshaft – 2 m3 Aggragate bunker: 4x20 m3 Cement weighing: 900 kg Additives weighing: 40 kg Water weighing: 700 lt Cement silo is optional. COMPACT 110 consist of: • Aggregate Storage Hopper • Aggregate Weighing Hopper • Aggregate Transfer Conveyor or Bucket System • Twinshaft Mixer • Mixer Chassis, Walking Platforms, Ladder • Water Weighing Hopper • Cement Weighing Hopper • Admixture Weighing Hopper • Air Compressor • Cement Screw Conveyor • Bolted Cement Silo • Top Filter, Safety Valve and Accessories • Control Cabinnet • PC and Automation System • Control and Power Panel FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!! Djdpfxoxqv D Ro Addewf

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MILLING SPINDLE - Tool holder type : BT30 - Spindle power : 4,9 [kW] - Spindle speeds : 16.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 700 x 400 x 300 [mm] - Rapid traverses rates (X/Y/Z) : 50 / 50 /56 [m/min] - Cutting feed rates (X/Y/Z) : 1 - 30.000 [mm/min] - Distance table / spindle nose (min./max.) : 330 - 630 [mm] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 - Tool exchange time : 0,8 [sec] TABLE - Table dimensions : 800 x 400 [mm] - Maximum weight upon table : 250 [kg] POWER SUPPLY - Supply voltage : 220 [V] - Total installed power : 9,5 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.050 x 2.220 [mm] - Machine height : 2.497 [mm] - Machine weight : 2.400 [kg] MACHINE HOURS - Number of hours under power : 23.456 [h] - Number of working hours : 16.703 [h] EQUIPMENT - CNC : Brother CNC-C00 - Interface : Ethernet / USB - Electronic handwheel - CNC option : extanded Memory 500 Mo - CNC option : High accuracy mode BⅡ - Type of divisor : 4e axe CNC intégré * manufacturer : YUKIWA * model : DRC170-EU * travel 4th axis : 360 [°] Dodpsxzu T Sjfx Addowf * indexing precision 4th axis : 0,001 [°] * clamping diameter : 140 [mm] * center height : 135 [mm] * with counter bearing * Coolant tank : 150 [l] * with high-pressure pump : 15 [bars] * With cabin washing - Coolant through spindle - Tool probe - Electric transformer

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive, servo controller, control system, converter, PLC control system, power supply unit, inverter, servo drive, drive controller -Manufacturer: KEB, Frequency converter Drive Controller Combivert -Type: F5 -Item No.: -3AHA Dwodpext Hpcjfx Addjf -Power: 4.0 kVA -Dimensions: 320/90/H220 mm -Weight: 3.7 kg

Condition: excellent (used), 40kVA 1-phase transformer for sale 1x400V -> 1x110V Manufacturer: Trafó-Print Kft. Type: TZ 40 000 Power: 40kVA Dwedpfsw Ev Ihex Addef Primary: 1x400V Secondary: 1x110V

Condition: ready for operation (used), Year of construction: 1994, Offered is a high-voltage switchgear device ZK8 System Calor Emag from Peters & Thieding. Year of construction 1994, standard series VDE 0670 (IEC 62271), rated voltage 24.2kV, insulation level 50/125kV, rated frequency 50Hz, operating current 630A, short-time withstand current 20kA, short-circuit duration 1s. Viewing is possible by arrangement. Dwjdsxyk Txjpfx Addef

Condition: ready for operation (used), Year of construction: 2001, operating hours: 41,000 h, functionality: fully functional, turning diameter over cross slide: 400 mm, spindle bore: 66 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 600 mm, Equipment: documentation/manual, rotational speed infinitely variable, 2-axis CNC lathe in perfect working order Year 2001 and maintained. Very reliable machine (in 20 years, spindle and clamping pot have been rebuilt once and hydraulic accumulator) HEIDENHAIN Turn Plus IT CNC (conversational and ISO) 12-station VDI 30 turrets Very precise and rigid, suitable for quality 5 (Heidenhain scale on the X axis) Chip conveyor Part catcher arm, diameter 66, length 100 Hydraulic counterspindle (pedal) 400/400V isolation transformer 210mm hydraulic Autoblock chuck with pressure compensator (for clamping thin parts) 66mm spindle bore Pre-equipped bar feeder Djdpfx Ajwb Eqdoddowf 41,000 operating hours (see hour meter) All original documentation and invoices (few).

Condition: excellent (used), Year of construction: 1999, FULLY AUTOMATIC - EVG G55/102 MESH WELDING LINE Construction year – 1999. Line is refurbished 4-5 years ago. Electrical cabinet completelly updated in software, PLC S7-405 and electrical systems in DECEMBER 2018. Line + cross wires from coils Mesh width: min. 1200mm to max. 2500mm Mesh length: min. 2000mm to max. 6000mm Separations between AT: 50mm – 1000mm stepless Separations between AL: 100mm, 150mm, and multiples Diameter AT: min. 3,8mm to max. 8mm Diameter AL: min. 3,8mm to max. 8mm Machine speed: max. 150 QD/min. Reel weight: max. 3000 kg Stack height: max. 700mm Panel weight: max. 150 kg Power rating of welding transformers at 50% intermittent duty: 960 KVA Drive power: 153kW Tension de red: 3 x 400V Network frequency: 50 Hz Dimensions (approx. mm) Machine: L x W x H Weight: G55L/102-RV 4900mm x 1800mm x 2300mm 15,000 kg T6B/102 7500mm x 2200mm x 1800mm 6,000 kg T6B/102 5200mm x 1700mm x 2200mm 4,200 kg Main Voltage: 3 x 400 V Frequency: 50 Hz Connection power: 960 kVA (50% S.I.) Djdpfexvmamsx Addswf 192 kVA (drive force) 24 longitudinal wire straightener Longitudinal wire dragger Lars loop Longitudinal straighteners Longitudinal feed Welding head Shears Mesh extraction Turner stacker Exit table of 7m Cross feeders Cross wire drag

Condition: used, TECHNICAL DETAILS - Number of axes : 8 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 20 [mm] - Max. machining length : 210 [mm] - Spindle speeds : 12000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 12000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.001 [°] - Number of guide bush holders : 2 GUIDE BUSH HOLDER 1 - Number of positions : 8 - Number of motorized positions : 3 - Live tools speed : 8000 [rpm] GUIDE BUSH HOLDER 2 - Number of positions : 5 - Number of motorized positions : 2 END ATTACHMENT - Number of positions : 11 SECONDARY OPERATION - Number of positions : 16 - Number of motorized positions : 4 - Live tools speed : 8000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] EQUIPMENT - CNC : Fanuc 31i-model A - Rotating tool motor on : S11,S21,S51 - Rotating guide bush - Parts catcher Dwjdsw A Au Aopfx Addef - Parts conveying strip - Ejection of workpiece - Chips conveyor - Coolant tank * with high-pressure pump : LNS POWERSTREAM VP 70 [bars] - Bar loader : TORNOS SBF320 - Electric transformer - Number of turning tool holders : 13

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive, servo controller, control system, converter, PLC control system, inverter, converter, servo drive, drive controller -Manufacturer: Hitachi, frequency converter inverter -Type: WL200-004SFE -Power: 0.4 kW Djdpfx Ajxt Hdajddewf -Dimensions: 120/70/H130 mm -Weight: 0.7 kg

Year of construction: 2005, condition: good (used), Schrack 300 kvar Reactive power compensation equipment Manufacturer: Schrack Energietechnik Type: KRSMO-P-TS-25/12 Fi 7% Nominal power: 300 kvar Rated voltage: 400 V Nominal frequency: 50 Hz Rated current: 432 A Reactive power control relay: Frako RM9612 Rittal electrical switch cabinet: Freestanding with built-in fan. Manufacturer: Rittal Dwsdpfx Ask D Dxboddjf Type: TS8806 Dimensions: 610x830x2000 mm

Condition: good (used), Nakamura-Tome TW-20 CNC Twin Turret Lathe With Fanuc CNC Control & Iemca TAL/AUTO 65/38 Automatic Bar Feeder Kitagawa HOH-60K Ø160mm 3-Jaw Power Chuck. (1) Ø140mm Collet Holder, Max 4,500 rpm. Maximum Turning Approx Ø290mm. Maximum Turning Length Approx 190mm. Bar Capacity Ø51mm. Driven Tool Speed Approx 5,000rpm. (2) 12-Station Turrets. S/No. W21206. Iemca TAL/Auto 65/38 Automatic Ø65mm x 3 Metre Capacity Bar Feeder with Control. Dwodsx Ah Rgjpfx Addef With: Transformer, Frederick Crowther 'Cromar 6028' Swarf Conveyor, Swarf Bin, (2) Foot Switches, Coolant System, Tool Presetting Arm & Parts Catcher. This lot also includes Mobile Parts Table with Round, Hexagon, Plain & Serrated Collets Plus Bar Feeder Spares. Power Supply: 415 Volt 3-Phase.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 25,539 h, functionality: fully functional, machine/vehicle number: 0.2633/331852, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 200 mm, total height: 200 mm, total length: 800 mm, total width: 500 mm, workpiece height (max.): 200 mm, type of input current: three-phase, overall weight: 2,200 kg, table load: 500 kg, positioning accuracy: 0.005 mm, Equipment: cooling unit, documentation/manual, fridge, CHARMILLES TECHNOLOGIES from 2001 Model: ROBOFIL 290 P 0.25MM AND 0.30MM WIRE EROSION MACHINE MAKE AN OFFER TO BUY BACK Features: - Maximum part dimensions: 850 x 500 x 200 [mm] - Maximum weight: workpiece weight: 500 [kg] - X x Y x Z strokes: 400 x 250 x 200 [mm] - U x V stroke: 400 x 250 [mm] - clearance/height angle: ±30 [°] / 200 [mm] - wire diameter: 0.25 [mm] - acceptable coil types: P3 and P5 - tank capacity: 300 [l] - generator: 10 [kVA] - 400/400V isolation transformer - dimensions: 1800 x 1600 x 2130 [mm] - weight: 2200 [kg] Dodpfev Rfm Ssx Addjwf

Condition: good (used), functionality: fully functional, Year of construction: 2017, mobile Air filter extraction box Box with built-in fan and filter cartridge. With HEPA filter. for ventilation, room air filtration and extraction. extraction capacity ca 1800m3/h extraction fan: IMOFA DS 11-4 460watt 50 Hz 4.8 Amp voltage: 230v 50Hz Systemair RTRE 5 transformer controller Dwjdpfxevvcqxj Addof 4 pcs filter cartridges 1 pc ULTIMA RP Hepa filter 3000m3/h Aluminum frame housing, mobile brakeable wheels dimensions: 100x100x80 cm weight: ca 120kg