Used Transformer 250 Kva for sale (12,855)

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 4,500 kg, fuel type: diesel, tank capacity: 700 l, color: beige, power: 322.15 kW (438.00 HP), output current: 591 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 328 kW (445.96 HP), nominal power (apparent): 410 kVA, continuous power: 269 kW (365.74 HP), continuous power (apparent): 370 kVA, total length: 4,463 mm, total width: 1,606 mm, total height: 2,500 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Doosan, type of cooling: water, AVS diesel generator DW 370 DO2 15 AK14A PRP power: 296 kW / 370 kVA ESP power: 328 kW / 410 kVA Engine: Doosan P158LE-1 Emission stage: 2 Speed: 1,500 rpm electronic speed governor Operating voltage: 24 V Cooling: water-cooled Generator: Mecc Alte ECO 40 1S/4 Voltage: 400 V Voltage regulator: DSR1 Control panel: DSE 7320 Battery charger: 5 ampere Type: Canopied unit; weatherproof, soundproofed • Emergency stop switch • Radiator with mechanical fan • Base frame construction with integrated fuel tank (700 L) and vibration dampers • Voltage and frequency regulation according to ISO 8528-5 • Unit suitable for stationary operation only Please note that these units are not approved for mobile use in accordance with current EU regulations. Isdpswu Ectsfx Adwstb The units are sold as B-grade goods. B-grade means the units may have visual imperfections such as flash rust or rust on the housing. These do not affect the functionality or performance of the units in any way. By accepting this offer, you expressly acknowledge the described characteristics and corresponding condition of the units.

Condition: used, Year of construction: 1979, machine/vehicle number: Res BS, Demag PK2 Chain Hoist Crane Lifting Unit 250kg / 500kg Iodpfx Adjvzkyljwjtb Approx. 40 units available!!! 250kg / 0.25t rated load / lifting capacity – single fall – 500.- 500kg / 0.5t rated load / lifting capacity – double fall – 600.- With 2 lifting speeds, lifting height approx. 3-4m Complete with pendant control and load hook Total weight approx. 40kg, 380V 50Hz connection Top condition, fully functional. Not a worn or used device! Connect and start operating. Comes from ongoing operations Item location: 75053 Gondelsheim See pictures

Year of construction: 1970, operating hours: 1,433 h, condition: excellent (used), For sale is an emergency generator from MWM with 250KVA The emergency generator runs on diesel. The complete genset stands in a 20-foot container The emergency power generator has 1433std. kVA250 Weight approx. 9000 kg Itedpfjua Ai Djx Adwjb Dimensions 6100x2450x2600 mm

Condition: excellent (used), Year of construction: 1996, operating hours: 250 h, functionality: fully functional, We have a 2000 KVA container generator for sale. Optionally 400/230 V (50 Hz) Itsdpfxewa Tg Do Adwob or 10 kV (+/- 5%) (50 Hz) Fully installed in two soundproof 40' HC containers. Suitable and intended for multi-layer installation. Dimensions: (L x W x H) 12020 x 2500 x 5800 mm Weight: approx. 33 t + 11 t Engine: MTU 16v396 TB 34D Generator: A.v. Kaick DIDBN 130/125 h/4 2000 KVA Generator Engine and generator completely mounted on a base frame and connected via a flexible coupling. Cooling system: Separate table cooler installed as a dual-circuit cooler in the upper container, including temperature control, connecting lines (stainless steel cooling water lines with shut-off valves for each line), circulation pumps, control valves, etc. for safe operation. Tank system: 4000-liter tank system installed in the upper container, including system-specific accessories and complete piping. Air supply and exhaust system: Soundproof baffles within the air supply and exhaust chambers in the container. Air supply and exhaust openings each equipped with appropriate weather protection grilles, motor-operated blinds in the container that open automatically when the generator is in operation. Exhaust system: Insulated exhaust ducts within the container lead vertically from the container via silencers through the upper container, discharging the exhaust gases through the container roof. Switchgear: Medium/low-voltage switchgear for fully automatic emergency power operation!!! Optionally 400/230 V or 10 kV (+/-5%) Fully automatic machine monitoring with control for power failure detection, automatic start-up, and emergency power takeover. Upon power recovery, the system automatically switches back to the mains supply. In the low-voltage range, parallel operation with the mains/resynchronization is possible. Control for external mains switch - optionally 10 kV or 400/230 V Low-voltage switchgear equipped with: 3200 A generator switch (400/230 V) Medium-voltage switchgear equipped with: 115 A generator switch (10 kV) Technical data of the type-tested medium-voltage switchgear Panel type: ZS8 Rated voltage: 12 kV Operating voltage: 10 kV etc.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, controller model: Cybelec DNC 1200, bending force (max.): 250 t, working width: 3,550 mm, distance between stands: 3,000 mm, overall weight: 18,500 kg, TECHNICAL DETAILS Press force: 250 t Bending length: 3,550 mm Distance between uprights: 3,000 mm MACHINE DETAILS Controlled axes: y1, y2, x, r, z1, z2, back gauge tilt Control unit: Cybelec DNC 1200 Dimensions & weight Footprint (L x W x H): approx. 4,300 x 2,750 x 3,750 mm Machine weight: approx. 18,500 kg EQUIPMENT Two-hand foot switch Lasersafe Fisseler Hydraulic tool clamping top and bottom Die shifting Hydraulic crowning Itedpfxex I Ebis Adwsb Support arms 1 set of upper and lower tools Safety guard

Condition: ready for operation (used), Year of construction: 2006, operating hours: 16,421 h, Control Unit Itjdex D Igwopfx Adweb Brand HEIDENHAIN Model iTNC530 Main Drive Spindle speed range 18000 Tool taper BT40 Number of axis 5 Movement X-Axis Movement 2500 mm Y-Axis Movement 920 mm Z-Axis Movement 820 mm This 5-axis DECKEL MAHO DMF 250 linear was manufactured in 2006. It features a Heidenhain iTNC530 control, extensive travel capabilities with X2,500mm, Y920mm, Z820mm, and a high-speed spindle at 18,000rpm. The machine includes a BT40 spindle taper, ATC 30 magazine, and full NC rotary capabilities on A, B, and C axes. Consider the opportunity to buy this DECKEL MAHO DMF 250 linear universal machining centre. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), Year of construction: 2006, Universal 5 axis Machine Center DMG DMF 250 Linear Isdpfx Adex Nmllewotb Year Mfg 2006 Heidenhain iTNC530 control Travel X2,500 Y920 Z820mm NC Rotary Chuck _ Hoffmann (A axis) NC B axis -105 ~ 105 degree (Spindle Head) NC C axis 360 degree ATC 30 magazine Spindle 18,000rpm Spindle Taper BT40 Direct Measuring X,Y & Z axis

Condition: excellent (used), CATALOG NUMBER 7651 Technical data: - Track width: 250mm - Shaft width: 250mm - Max saw blade diameter: 400mm - Saw blade bore diameter: 70mm - Max cutting height: 120mm - Table width with opening: 810mm - Table length: 1780mm – From above: - Pawls/kickers - Smooth pressure shaft - Pawls - Smooth pressure shaft - Shaft with saw blades - Smooth pressure shafts, 2 pcs – From below: - Guide - Pawls/kickers - Track - Central lubrication - Stepless feed speed adjustment - Feed motor 1.1kW - Main motor 37kW - Manual body lifting - Manual lifting of shaft with saw blades - Chip extraction connection diameter: 200mm - Overall dimensions (L/W/H): 2150x1480x1760mm - Weight: 1735kg ADVANTAGES – German-made – Stepless feed speed adjustment – Multi-blade saw, used, in very good condition Itedpsyaq Idsfx Adweb Net price: 46,900 PLN Net price: 11,160 EUR (at a rate of 4.25 EUR) (Prices may change depending on exchange rate fluctuations)

Condition: used, Tumbler Iglu Scheid with cooling Volume: 250 liters Dimensions: 140x120x195cm Iodon Nw R Repfx Adwotb Electrical power: 6.5kW/13kW

Condition: excellent (used), Year of construction: 2012, WALTER WD 250/350 30 and 37 kW shaft multisaw – Polish production – year of manufacture 2012 – DTR and CE TECHNICAL PARAMETERS: Itedpfx Adjmv Elpowsb cutting height 170 mm cutting width 350 mm spindle diameter 2 x 70 mm diameter of circular saw blades 300 mm spindle motor 30 kW and 37 kW feed motor 1.5 kW seven lower pulling rollers two upper toothed pulling shafts length of the feeding table 3000 mm spigot diameter belt collecting waste from under the machine 2 x 200 mm dimensions (length / width / height) 320 / 200 / 200 cm weight 2000 kg

Condition: excellent (used), Catalogue number 7861 TECHNICAL DATA - Workpiece length: 2500 mm - Workpiece width: 800 mm - Main motor approx. 4 kW - Grinding belt width: 170 mm - 2 speed settings - Extraction port diameter: 2x120 mm Iodpfx Asx U Tnqodwjtb - Overall dimensions (L/W/H): 3640x1220x1500 mm - Weight approx. 800 kg ADVANTAGES – Manufactured in Poland – DTR documentation included – Used sander, in very good condition Net price: 6900 PLN Net price: 1640 EUR at an exchange rate of 4.2 PLN/EUR (Prices may vary with significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2015, Machine is ready for sale. It's used only 1,5 years. I can send a short video about the machine if required.All techcnical documents are also saved. Itsdpfx Adjlu Hbpswjb

Condition: new, Year of construction: 2025, neu 2025 020156 prompt, Zwischenverkauf v Türkei 6720 € 129.7 € 1 250 kg 205 kg 150 mm 150 mm 360 ° 360 kgm 230 / 50 V / Hz 0.37 kW 0.25 kW 0.1 - 3 U/min 30 s 600 mm M16x6 mm 550 mm 1000 mm 700 mm 1700 mm Iodpfxox Urqks Adwetb The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) INCL. FOLLOWING OPTION: Pneumatic centering attachement

Condition: new, Year of construction: 2025, neu 2025 020157 prompt, Zwischenverkauf v Türkei 6320 € 121.98 € 1 250 kg 150 mm 150 mm 360 ° 360 kgm 230 / 50 V / Hz 0.37 kW 0.25 kW 0.1 - 3 U/min 30 s 600 mm M16x6 mm 550 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Itodpfx Adsx Urpmjwob Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) OPTION: Pneumatic centering attachement

Condition: excellent (used), functionality: fully functional, Catalogue number 7668 TECHNICAL DATA - Track width: 250mm - Shaft width: 450mm - Max saw blade diameter for multi-blade saw: 350mm - Max saw blade diameter for edger: 350mm - Saw blade bore diameter: 80mm - Max cutting height for multi-blade saw: 120mm - Max cutting height for edger: 100mm - Table width (with clearance): 900mm - Table length: 1770mm - From above: - Kickback pawls - Feed roller, pressing, metal, smooth - Kickback pawls - Pressing feed roller, slip type - Shaft with saws Ijdpjx Tpqxofx Adwetb - Pressing feed roller, slip type, metal, 2 pcs - From below: - Guide rail - Kickback pawls - Crawler track - Central lubrication - Stepless feed speed adjustment - Feed motor: 1.1kW - Main motor: 22kW - Overall dimensions (L/W/H): 2200x1600x1800mm – Weight: 1900kg – German-made – Shaft with floating blade for edging – Used multi-blade saw, in very good condition Net price: 54,900 PLN Net price: 13,070 EUR depending on the exchange rate of 4.2 EUR (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7751 TECHNICAL DATA - Track width: 250mm - Working width of roller: 250mm - Max blade diameter: 300mm - Blade bore diameter: 60mm - Max cutting height: 100mm - Table width with extension: 520mm - Table length: 1580mm Itedjxft Dwepfx Adwjb *from above: - pawls: 2 rows - metal pressure slip roller - shaft with saw blades - smooth metal slip roller *from below: - slip roller - guide rail - pawls - track - central track lubrication - stepless feed speed adjustment - feed motor: 0.75kW - main motor: 15kW - extraction port diameter: 200mm - overall dimensions L/W/H: 1640x1400x1550mm - weight: 1000kg ADVANTAGES – Italian manufacture – in very good condition – used multi-blade saw Net price: 32,900 PLN Net price: 7,830 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (if there are significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number 7248 Itsdpfx Adsrf Tahswsb TECHNICAL DATA - max. workpiece height: 160 mm - spindle working length: 250 mm - spindle diameter: 40 mm - max. tool diameter: 220 mm - worktable (length/width): 420x1010 mm - motor: 11 kW - 2 pneumatic workpiece clamps - extraction port diameter: 180 mm - dimensions (L/W/H): 1500x1010x1560 mm - weight: 689 kg ADVANTAGES – German manufacture – Used milling machine, in very good condition Net price: 31,900 PLN Net price: 7,590 EUR depending on exchange rate of 4.2 EUR (Prices may change in case of significant exchange rate fluctuations)

Condition: used, New: Yes Field of application: Mining Power: 110 kW (150 HP) Empty weight: 35.000 kg Dimensions (LxBxH): 700 x 240 x 240 cm Engine type: V-type Volume of the tank: 20 m^3 Productivity: 400 tph Log(Blade) Washer(With SKF AUTOMATIC LUBRICATION) Isdpsx D Dagefx Adwotb Model : LW25 Machine Size : 2000 X 7000 X 2 (Double row) Drive System : 2 X 55 kW Feeding Size : 0 - 50mm Main Body : It is Manufactured ST37 A1 Quality 8mm Sheet as Twisted er Sheet to Which the Front Reducer Group is Connected Will be Manufactured From 12 mm Sheet Metal. Helice: Double Row Carrier Spiral Spoons ST 37 are Manufactured From 8 mm Sheet and the Arms Against Wear Will be Covered With Casting, Helices Will be Hardox Coated. Shaft : Made of Cr-Ni-Mo Alloy Steel. Housing : GS52 Steel Casting Parts Used. Bearing : SKF or FAG Mark Heavy Duty Spherical Roller Bearings.

Condition: used, Year of construction: 1989, pressure 250 t stroke 20 - 190 mm no. of strokes 24 / 48 /min throat 500 mm passage to the back 1000 mm dayligth 615 mm table surface area 1400 x 880 mm hole in the table 450/500 mm table height over floor 800 mm ram surface 1380 x 620 mm ram adjustment 125 mm Itedpjvut Ncefx Adwsb power requirement 29,0 kW Weight 27,0 t dimensions of the machine ca. 2,0 x 2,6 x 4,1 m x m x m permitted for manual loading according to the German Safety Regulations (UVV) with motor with 2 speeds, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, semi-automatic stroke adjustment, motoric centralized lubrication, two-hand operation can be inspected in running function in our warehouse

Condition: used, material width 250 mm material thickness 0,5 - 4,0 mm no. of straightening rolls 9 straightening roll diameter 60 mm number of draw-in rolls 2 Iedpfovzxn Rex Adwotb power requirement 3,8 kW Weight 0,8 t Dimensions (WxDxH) 1,6 x 0,8 x 1,5 m with infinitely variable drive

Condition: used, Year of construction: 1993, Pressure 250 t stroke 500 mm distance between columns 1650 mm side window 750 mm daylight 1200 mm table surface area 1650 x 1250 mm die cushion capacity in table 80 t die cushion stroke in table 250 mm die cushion area in table 1070 x 780 mm table height over floor 850 mm Itedpfx Aev Svb Asdweb ram surface 1650 x 1250 mm speed down 10 mm/s speed up 80 mm/s working speed 10 mm/s oil volume 400 l power requirement 22,0 kW Weight 21,5 t dimensions (WxDxH) 2,7 x 2,3 x 4,25 m height above floor 4,0 mm permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure and way, hydraulic drawing cushion in table, hydraulic cutting impact cushioning (4x Parallel holding cylinders), two-hand operation, hand lever operation

Year of construction: 2005, condition: ready for operation (used), This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 was manufactured in 2005. It features a central accumulator for high-speed injection and chromed tie bars. The pump drive power is 22.0 kW, with a mains voltage of 400 V/50 Hz. It includes a color data display with VGA interface, an oil cooler, and electric screw drive. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis S 250/630-1450 hydraulic injection moulding machine. Contact us for more information. • 5x similar units available Itedpfxox D Rqrj Adweb • Central accumulator for high-speed injection; core, ejector, and nozzle movement • Nozzle movement parallel to mold movement • Chromed tie bars on clamping unit • Pump drive power: 22.0 kW • Mains voltage: 400 V / 50 Hz, 3 Ph + N + PE • Separate mains connections for drive and heating • Control: color data display with VGA interface and AT keyboard interface • Injection, holding pressure, and back pressure via servo valve • Reinforced oil cooler • Separate water connections for mold and oil cooling • Compliance: Basic version Europe, according to valid safety regulations • Painting: Bottom anthracite grey RAL 7016; Top blue 571C MD • Elastic machine mounting • Ultrasonic displacement measuring system with digital data transmission for injection, ejector, mold (WZ), and nozzle (AWH) movements; 1/100 mm resolution for injection axis • Reduced centering diameter (D=100/125) for fixed mold platen • Mold connection dimensions type E (similar to EUROMAP), without side ejector plate • Standard mold installation height • Safety interlock: mold opening and ejector forward only with closed safety door • Ejector with position control via proportional valve; pressure and velocity independently programmable • Electric screw drive, frequency-controlled

Condition: ready for operation (used), Year of construction: 2011, This HOLZMA HPP 250/38/38 panel saw was manufactured in 2011. It features a main saw motor of 9.2 kW and a scoring saw motor of 1.1 kW. It can handle a maximum panel width and length of 3800 mm. Equipped with 8 clamps and 3 air cushion tables, it runs on Windows XP with CADMATIC 4 software. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Scoring saw motor: 11 kw • Max panel width: 3800 mm • Max panel length: 3800 mm • Max main saw blade length: 75 mm Isdpeyaqhdjfx Adwstb • Number of clamps: 8 • Number of air cushion tables: 3 Extra Information Control Unit Operating system: WINDOWS XP Software: CADMATIC 4

Condition: used, Year of construction: 1977, faceplate diameter 2500 mm swing diameter 2700 mm turning height 2000 mm cross rail - adjustment 1500 mm workpiece weight max. 20.000 kg total power requirement 71 kW Control Siemens Sinumerik 840 Itedpfxouddpgo Adwsb Single-column vertical lathe 2000 x 2000mm Retrofit: 1997 Gr. turning diameter: 2700mm Gr. distance f. face plate to bottom of toolholder: 2150mm chisel holder: 2150mm Support swivelling up to 30° Chisel cross-section: 240x240mm small plunging diameter: 300mm Special equipment: Re-moulding, taper turning, thread cutting, constant cutting speed

Condition: ready for operation (used), Year of construction: 1991, Max. grinding diameter: 250mm Grinding wheel length: 300mm Grinding wheel diameter: 600mm Iodpjx Tpuqofx Adwotb YOM: 1991