Used Transformers for sale (666)

Condition: like new (used), Year of construction: 2014, functionality: fully functional, Offer Plan: No. A8 28 441 Internal dimensions: width 1,500 mm – height 1,740 mm – length 2,500 mm Working temperature: 380 to 420°C. Maximum operating temperature: 450°C / air. TEMPERATURE HOMOGENEITY Homogeneous volume dimensions: width 1,300 mm – height 1,440 mm – length 2,200 mm Temperature homogeneity guaranteed: ±5°C within the homogeneous volume when it is at an average temperature of 420°C. Measurements taken in the empty chamber under stabilized thermal conditions. Slightly higher temperatures are expected near the walls. At floor level, the temperature will be approximately 80°C. A standard concrete floor is sufficient. FLOOR Constructed from aluminized steel sheet placed over 60 mm thermal insulation. This floor is equipped with embedded running rails (supplied by the customer). ACCESS DOOR TO THE INTERNAL VOLUME Number of doors: 1 Type: double-leaf, hinged on the right. DOOR SEAL Refractory fiber gasket. VENTILATION Horizontal air circulation. Number of units: 2. Type: centrifugal fan. Construction: mild steel. Individual air flow: 6,600 m³/h. Drive motor: brand A.B.B. or LEROY SOMER. HEATING Type: natural gas with combustion gas recirculation. Total power: 90 kW. Number of heating zones: 1 Burner type: modulating burner by WEISHAUPT, compliant with EN 746-2 standard. TEMPERATURE CONTROL Number of controlled zones: 1. Controller: EUROTHERM microprocessor-based PID controller. Safety: Torque break safety device. Relay output for contactor control. Cabinet equipment includes: - main switch - multiposition switches to prevent incorrect operation during start-up Lajdpfx Aaox Dhrmsnok - transformer for control circuits - fuses for power and control circuits - contactors for the heating system - circuit breakers and contactors for motor control - panel switches - indicator lights - control and regulation instruments - CE marking will be affixed to the machine (subject to compliance with safety instructions) - A certificate of conformity or incorporation will be supplied by SAT.

Condition: good (used), overall weight: 1,650 kg, Transformer / Trafo Brand: GONELLA 630 kVA 12 kV Net weight: 1650 kg Lsdpfx Aasxbfy Aensak Further data: see photos Loading and shipping possible!

Condition: new, Year of construction: 2023, New cast resin, epoxy dry distribution phase transformers manufactured by TESAR Italy, 1 pc 630 and 1 pc 1600kVA, 20000 ( ± 2 x 2,5 %) /400V; Dyn1/5/11 ( adjustable), IP00, year of production 2021 and 2023, ecodesign 1 and 2, project documentation and rutine protocol, manuals, unpacked, 2 years warranty. Laodspag H Repfx Aanok

Condition: ready for operation (used), For sale: an indestructible Makita carpentry milling machine, Model 2516, with as-new cutters for dovetailing and rebating. Technical data: - 1430 watts - 110/230 V transformer voltage - 12,000 rpm Lsdpfx Aasd Tdx Donjak The milling depth is 60 mm. Beams up to a width of 320 mm can be clamped. Naturally, a depth stop is included, which can be quickly and tool-free adjusted. The hand crank allows for fine adjustment of the position to be mortised. Because the milling machine clamps onto the beam, unlike certain machines from other well-known manufacturers, there is no risk of plunging in crooked or at an angle. With a hand lever, the mortiser can move along the beam, allowing for very precise positioning of the mortise. As seen in the pictures, the machine is in excellent condition, both technically and visually. The construction is robust and well-engineered. International shipping is possible.

Condition: used, Year of construction: 2016, operating hours: 7,993 h, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, overall weight: 4,500 kg, Control SIEMENS CELOS 840SI OPERATE MULTI TOUCH Hours POWER ON Laodpfx Aasx Ivumjnok 18,527 h SPINDLE ON 7,993 h Spindle speed 14,000 rpm Magazine 30 slots Accessories - Measuring probe TS649 - Chip conveyor - Transformer

Condition: good (used), Year of construction: 2016, Marel SensorX 501 Bone Detection Advanced sensing technology and software give the SensorX bone detection capabilities that are unprecedented among automatic bone detection systems. The SensorX is more reliable and consistent in a production environment than any manual inspection. It detects bone fragments with great accuracy, which ultimately improves both food safety and product quality. The SensorX bone detection system automatically finds bonesand other foreign objects in poultry meat using advancedX-ray technology. It detects bones and displays their locationon a monitor. This efficient, accurate and high performingdetection system enables poultry processors to transform the quality standard of their products, giving them a competitive advantage in the industry. Superior bone detection The combination of Marel’s advanced sensing technology, software development and expertise in designing integrated turnkey systems, has created an optimal bone detection solution that fits any deboning process. The SensorX handles all deboned poultry products. The SensorX system has been installed for quality poultry processors, including the biggest brands in the industry, in more than 35 countries around the world. Easily integrated with all major systems The SensorX can be integrated with all major poultry deboning systems. It has proven itself to deliver superior bone detection, give a better process overview, minimize product handling and reduce over-trimming. Ultimately, this gives processors a safer, more valuable product. Innova provides valuable information The Innova Food Processing Software ensures reliable data collection and enables full traceability throughout the production process. Real-time monitoring Innova provides real-time monitoring of key performance indicators (KPIs) such as yield, throughput, quality, capacity and labor efficiency. These valuable insights enable processors to identify opportunities for improvements, while ensuring that production conforms to quality and food safety standards. Manufacturer:Marel Model:SensorX 501 Year:2016 Power:1,8kW / 50-60Hz / 3x400V Belt Speed:0,46m/s Ljdpfx Aaex I D U Isnsak Scan Width:500 mm Machine Dimensions LxWxH:3.363x992x2.006 mm Machine Weight:840 kg.

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Input: 1/N/PE AC 230V 17A 50/60Hz -Output: 3/AC 0-230V 9.5A 2.2kW 0-480Hz -Dimensions: 80/280/H215 mm Laodpfx Aob A Sdxeanok -Weight: 4 kg

Condition: used, Year of construction: 2019, x-travel 2.000 mm y-travel 820 mm z-travel 720 mm Control Mazatrol Smooth G spindle taper SK 40 spindle turning speed range 35 - 12.000 U/min spindle motor 22 kW distance spindle centre table top edge 140 - 860 mm table load 1700 Kg rapid travel x/y/z 50 m/min table width 820 mm table length 2500 mm table height over floor 870 mm T-slots 7 T-slot - width 18 mm T-slot - distance 100 mm tool change unit 48 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 130 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 260 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 450 l high-performance coolant system 25 bar total power requirement 46,7 kW weight of the machine ca. 14,8 t dimensions of the machine ca. 4,3 x 3,6 x 3,1 m STANDARD ACCESSORIES Transformer for the European market USB port (1 port) Mazak standard colour Spindle speed 12,000 min-1 (steep taper 40) Work area lighting SAFETY DEVICES Operator door with locking switch Work area panelling The splash guard encloses the working area from the side. Fully enclosed work area Protection against chips, coolant and access to the work area during automatic machining. Safety precautions in accordance with global standards COOLANT SUPPLY Coolant supply through spindle (pressure at the pump = 5 bar) Complete coolant system includes pumps, valves, pipework and nozzles for the efficient production of quality components. FACTORY AUTOMATION Automatic switch on/off and warm-up function Automatic switch-on of a warm-up cycle via digital timer MEASUREMENT SYSTEM Tool length measurement and tool breakage detection CHIP DISPOSAL Factory preparation for chip conveyor (left) NUMERICAL CONTROL Fixed control/operating unit Relocation Detector Mazatrol SmoothG control unit 19" LCD colour screen (touch screen) Mazak tapping/drilling cycle Tornado (Mazatrol) By drilling and tapping in helical machining mode, a wide range of diameters a wide range of diameters can be machined at high speed with a wide range of diameters can be machined at high speed with just one tool. This function minimises programming and machining times. EIA/ISO input function Tool path check in the background The tool path of a programme can be checked even if another programme number is programme number is called up and processed in automatic mode. 3D coordinate conversion Shape compensation for rotating axes Mazacc 2D software (contour correction) Accuracy is maintained at high feed rates. Mazacc-3D software package for high-speed machining High-speed and high-accuracy machining for contours defined in the finest programme contours defined in the finest programme increments. MAZACC-3D high-speed software package (NO456) is additionally required. Control with high smoothing Interface for LAN SD Memory Card I/F Smooth standard software for M/C - NO443 B) MAZACC-2D software (workpiece shape compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Shape compensation for rotating axes - NO497 D) High accuracy control for finishing operations - Seamless corner point control - Variable acceleration control - Ultra high speed machining mode - NO498 Rapid traverse paths Rounding function Absolute positioning system Machine incl. the f... Laedpfstuggcsx Aansk

Condition: used, Year of construction: 1999, Oil hermetical distribution transformer 160kVA 22/0,4kV Dyn5, year 1999, fully functional. Ledpfxewmwg Us Aanoak

Condition: used, functionality: fully functional, Year of construction: 2021, actuation type: electric, laser type: CO₂ laser, laser power: 4 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 10 mm, table length: 3,500 mm, table width: 1,600 mm, power: 2.7 kW (3.67 HP), overall weight: 9,200 kg, Equipment: CE marking, emergency stop, CO2 2-Dimensional Laser ML3015SR-32XP Processing Systems Made in 2021 Workpiece dimensions (mm) - 3050×1525 Machine design Flying optics Control 15” Mitsubishi-Electric full-touch screen Axis travel path X-axis 3,100 mm Y-axis 1,565 mm Z-axis 150 mm Repeat accuracy ± 0.01 mm Max. sheet size 3,050 x 1,525 mm Max. weight per sheet 930 kg Dimensions Laser cutting system incl. pallet changer 10,210 x 3,130 mm Lsdsxq Uawjpfx Aaneak Laser source integrated Weight Laser cutting system incl. laser source 7,500 kg Pallet changer 2,100 kg Laser Laser type 32XP Laser power 2.7 kW Pulse power 3.2 kW Processing head PH-XS include chiler and transformator Mild Steel 20 mm Stainless Steel 12 mm Aluminium 10 mm located in Israel

Condition: used, Year of construction: 2024, New demonstration machine!! List price: €52,742 (net). Forescolour, consisting of milling table (X-axis), gantry (Y-axis), Z-axis unit in compact board and base frame with adjustable machine feet. Milling bed with 19mm MDF sacrificial board. Table openings pre-configured longitudinally and transversely. Mechanical set consisting of profile rails including profile rail carriages, ball screw and precision racks. All elements assembled, pre-lubricated, including test run, ready to use immediately. Control set consisting of control cables, energy chains, planetary gears, stepper motors, high-performance drivers, power supply, and toroidal transformer, fully pre-mounted in the control cabinet, including sensors for each axis. Switching relays for automatic operation of the existing extraction system. Brush seals for dust protection, as well as CE-compliant safety devices provided by a moving extraction device and a laser scanner mounted on one side for working area monitoring, with a 275° and 5.5m field range (machine positioned in a corner of the room). Handheld control unit with all necessary machine operation functions, including emergency stop button and dead man's switch. Tool length sensor to determine tool length and active zero point offset. High-frequency spindle with 2.2 kW, including collet nut, frequency converter, line filter, braking resistor, and collet set. Monitor as a built-in monitor, including mini PC with Windows 10, pre-installed with Beamicon2 control software, as well as mouse and keyboard, integrated in an ergonomic desk. CAD license Rhino 7.0 and CAM license Estlcam V11, as well as all necessary documentation, will be sent by email prior to delivery. Vacuum table: Milling bed designed as a vacuum table, consisting of four adjustable segments. Cross table made of PE with a top plate of ... vacuum pump from Becker company with a capacity of 100 m³/hour, oil-lubricated. For connecting the vacuum pump, a 16 Ampere, 400 V AC plug is required. The customer must supply HDF 3mm double-sided raw board (2500x1300mm) as sacrificial plate for the entire vacuum table (recommended use: processing coated wood-based materials). Tool set in systainer: Tool set in systainer consisting of: - 1 pc. 1.5mm left (HF152LIVHM) - 1 pc. 3.175mm 30° (HF30GVHM) - 1 pc. 6mm 90° (HF90GVHM) - 5 pcs. 4mm Z2 (HF41REVHM) - 1 pc. 5mm Z2 (HF52REVHM) - 1 pc. 5mm Z3 (HF53SRECAR) - 2 pcs. 5mm Z2 (HF52REDIA) - 1 pc. 5mm Z2 (HF52UPDOWN) - 1 pc. 4mm Z3 (HF43REVHM) - 1 pc. 6mm Z1 (HF61REVHM) - 1 pc. 8mm Z2 (HF82LAVHM) - 1 pc. 10mm Z2 (HF10SVHM) - 1 pc. 12mm Z2 (HF12SVHM) Lajdpew Tfy Ujfx Aansk Maintenance package in systainer: grease gun 150 ml, one cartridge of high-performance grease 400 g, spray can of silicone spray grease 500 ml, one grease fitting with hose section and 30mm face milling cutter with indexable inserts. Pneumatic unit: consisting of four cylinders, throttling check valve, push-in fittings, angle push-in fittings, silencer connectors, filter regulator, push-in manifold, PE hose, and brackets, for use in a pre-configured table opening (for end-face machining). If pneumatics are required for both table openings, the position must be calculated twice (NOTE: Compressor to be provided by customer.) Technical data: Travel (X / Y) 2500 x 1300 mm, Z = 200 mm Dimensions (L / W) 1980 mm, 3800 x 2300 mm, H = 1900 mm Footprint: approx. 20 m² (smallest installation size) Weight: 1500 kg Rated voltage: 400 V Repeat accuracy: +/- 0.1 mm Connection values: 4.3 kW HF spindle

Condition: used, Year of construction: 2018, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 660 mm, Used DMG Mori NHX 4000 CNC Horizontal Machining Centre, 2018, s/n NHX41180108, Celos M730UM Control, Travels X-560mm, Y-560mm, Z-660mm, Pallet 400 x 400mm, Maximum workpiece swing 630mm dia, full 4th axis 0.001 degree, 15,000RPM spindle Speed, BT40 taper tooling, 60 station ATC, Through spindle coolant system interface, Coolant gun, In machine measuring system (table) touch sensor (metrol) + tool setter function, High pressure 70 bar coolant unit, Knoll interface conversion to suit high pressure 70 bar coolant unit, Transformer. Machine uptime 41,042 hrs, Program runtime 30,261hrs Lsdsx Nhpxjpfx Aansak

Condition: new, Year of construction: 2024, The machine is on stock!!! Lasdpfx Aajhymgdsnsk Max. edge thickness 3 mm Min./Max. workpiece thickness 8 – 50 mm Min. workpiece length approx. 160 mm Feed speed 10 m/min Gluepot heating time approx. 3.5 minutes Power consumption Ø approx. 7.4 kW Electrical connection 400 V/3 phase/50 Hz (Transformed to your voltage) Table height approx. 900 mm Machine dimensions (LxWxH) 4300x1300x1400mm Weight approx. 900 kg Exhaust connection Ø 1 x 140 mm

Condition: used, turning diameter max. 360 mm turning length 505 mm control Mazatrol SmoothC max. swing diameter over bed 660 mm swing diameter over slide guides max 255 mm bar material dia. max. 80 mm turning speed range - spindle 35 - 4000 U/min max. torque on the spindle 358 Nm x-axis 225 mm rapid traverse X-axis 30 m/min z-axis 605 mm rapid traverse Z-axis 33 m/min spindle nose A2-8'' spindle bore 91 mm spindle hollow 80 mm Lsdsv Dxw Repfx Aansak Milling spindle speeds ( driven tools) 5000 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40%ED) kW tailstock quill taper MT 5 Travel- tailstock 565 mm Axial pressure max 5,0 Nm Tool turret 1 Numbers of tools 12 (angetrieben) turning tool - shaft cross cut 25 x 25 mm tool taper BMT Required air-pressure 5 / 160 bar / l/min voltage 400 V coolant tank 180 l engine output 18,5 (30min Betrieb) kW Rated power (100% continuous operation) 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 3,6 x 2 x 1,8 m Machine incl. the following special accessories: Chip conveyor on the right side Productivity package C - special according to storage machine This package includes: High-performance coolant system (1.1 kW) Flow rate max. 17.6 l/min Preparation for chip conveyor (lateral) Automatic tool eye STANDARD ACCESSORIES Transformer for the European market Use of linear systems with guide carriage SD MEMORY I/F(1P) + USB MEMORY I/F(1P) 1 x USB memory interface (1 slot) Spindle bore 91 mm Set of manuals in electronic form on CD Mazak standard colour CE marking, metric, 50 Hz C-axis input accuracy 0.0001° NC controlled tailstock Tailstock pressure adjustment Tailstock with fixed quill MK5 SAFETY DEVICES Operator door with interlock switch Double foot switch Hydraulic pressure lock Fully enclosed work area Work area lighting Safety precautions according to global standard COOLANT SUPPLY Grundfos coolant pump type MTA (0.25kW / 7.6L/min) Complete coolant system Automatic switch-off via circuit breaker triggering MESSSYSTEM Absolute positioning system NUMERICAL CONTROL Synchronous tapping with milling spindle Relocation Detector Mazatrol SmoothC 10.4’ colour screen User macro (600 variables) EIA/ISO input function Tool path check in the background Thread cutting function (G33) Polar coordinate input (EIA) Drawing data direct input function Interface for LAN Various tool holders - All dimensions, weights and performance data are non-binding - Used machine without warranty -

Condition: new, Year of construction: 2017, Dry epoxy casted traction rectifier transformer - manufacturer TESAR Italy, power 2800kVA 20(2x±2,5%)/2x0.586kV, Dd0yn11, IP00, load level VI (IEC 60146), 100%-2800kVA-continuous, 150%-4200kVA-2 hours, 300%-8400kVA-60s, standard losses according to IEC standard, Al-Al winding, electrostatic screen, dimensions 2.45x1.4x2.7m (lxwxh), weight 8000kg, never used, complete documentation and test report, available 6 pcs on stock, year of manufacture 2017, suitable for battery storage systems BESS, can be installed outdoors in case of IP33 protection. Price negotiable. Laedexlybcepfx Aanek

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 22512.08, saw band length: 4,240 mm, saw band speed: 1,767 mm/s, remaining piece length: 90 mm, controller model: Mitsubishi E1032, TECHNICAL DETAILS Saw cut length: 3 mm - 9,999 mm Cut length in automatic operation: unlimited Remnant piece length in automatic operation: 90 mm Material feed per stroke: 950 mm Material support height: 850 mm Saw blade dimensions: 4,240 x 34 x 1.1 mm Laedpfx Aex Hz Hroanok Band speed: 17 – 106 m/min MACHINE DETAILS NC program control: Mitsubishi E1032 PLC control: Mitsubishi Coolant tank: 50 l Dimensions & Weight Dimensions (L x W x H): 2,000 x 2,580 x 2,000 mm Net weight: 2,300 kg Gross weight with pallet: 2,350 kg Power Supply Input: 400 V Frequency: 50 Hz Input protection: 20 A Drives Saw motor: 4.0 kW Hydraulic motor: 1.1 kW Coolant pump: 0.09 kW Electrical Power Total installed electrical capacity: 4.19 kW Control transformer: approx. 250 VA EQUIPMENT High-performance bandsaw Heavy-duty hydraulic production bandsaw Parallel feed carriage system on profile guideways Siko incremental encoder Material feed with ball screw spindle Hydraulic material clamping with long-stroke cylinder Material clamping with double vice before and after the saw blade Roller conveyor 6 m

Condition: used, Year of construction: 2023, New demonstration machine! List price: €76,170 net. Base machine complete in standard configuration for drilling and grooving: For detailed technical specifications, please refer to the data sheet for ProTec Type 0571. Processing unit includes: PowerBlock with 21 spindles and 1 grooving saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y. 4th drilling axis in Y. Workpiece sizes and weights: - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in throughfeed mode, max. 5600 mm programmable workpiece length via software - Workpiece weight: max. 75 kg Milling unit Profit with HSK63F including triple magazine for automatic tool change, motor 5.5 kW (S1), 1,000-20,000 rpm with frequency converter, reversible rotation, for HSK63F tool holder with collet chuck 462E/OZ25, cutter length up to 130 mm. Information: MultiUnit processing unit with PowerBlock (21/23 spindles), grooving saw, and optional Profit milling unit. Connected load 12 kVA, rated current 17.5 A, fuse 32 A, voltage 400 V, 50 Hz, 3-phase (without transformer), TN or TT network. Pneumatic connection 7 bar (102 psi). On the machine: 1/4" coupling plug (quick coupling) DN7.2, brass, factory-equipped. To the machine: 1/4" coupling socket (quick coupling) DN7.2, brass, customer-supplied. Supply line, hose inner diameter min. 12 mm Compressed air consumption: continuous airflow approx. 230 L/min (approx. 3.8 L/sec) (compressed air) Extraction connection: 3x extraction nozzles dia. 80 mm Extraction speed: 30 m/sec (measured at the extraction nozzle) Extraction requirement: min. approx. 2,500 m³/h Machine weight approx. 1,650 kg (with options!) Machine installation space: In principle, a ProTec fix can be anchored to the floor. Floor must be concrete (or foundation), at least at the 4 machine corners/feet. Equipment: - Protec 571 Profit HSK63F with triple magazine - Roller table 765 mm (Y-axis), foldable, for front of the machine, width 500 mm - Roller table 765 mm (Y-axis), foldable, for rear of the machine, width 500 mm - Auxiliary stop 600 mm with integrated rollers for roller tables - Additional safety device via lamella curtain - Required for horizontal milling for Lamello P-System (without Lamello P-System tools) Drill set for Protec, shank ø 10 mm with clamping surface (JSO): 1 carbide-tipped roof tip drill 5x70mm (NL 35mm), left #30566-5-05035-L 3 carbide-tipped dowel drills 5x70mm (NL 35mm), right #30540-5-05035-R 4 carbide-tipped dowel drills 5x70mm (NL 35mm), left #30540-5-05035-L 3 carbide-tipped dowel drills 8x70mm (NL 35mm), right #30540-5-08035-R 5 carbide-tipped dowel drills 8x70mm (NL 35mm), left #30540-5-08035-L 2 carbide-tipped dowel drills 10x70mm (NL 35mm), left #30540-5-10035-L 1 carbide-tipped hinge boring bit 15x70mm (NL 35mm), left #30300-5-15070-L 1 carbide-tipped hinge boring bit 20x70mm (NL 35mm), right #30300-5-20070-R Laodpfx Aasw Tfzfonsk 1 carbide-tipped hinge boring bit 35x70mm (NL 35mm), right #30300-5-35070-R Carbide-tipped grooving cutter ø 125/30 mm, groove width (SB) 4.0 mm, Z=12, left, Leitz. Only for chipboard and MDF; solid wood available on request. Toolholder HSK63 F, 3 pcs. For collet 462E/OZ25 Collet 462E/OZ25 for 25 mm shank, 3 pcs. Insert shank cutter Z1+1, carbide-tipped, WP drill cutting edge ø20, S25, left 120, L2/L3 58 mm, 1 pc. Grooving cutter, carbide insert, Z1, with WP drill cutt

Condition: reconditioned (used), Year of construction: 2017, operating hours: 2,710 h, functionality: fully functional, grinding length: 1,000 mm, grinding width: 600 mm, grinding wheel diameter: 405 mm, distance table to spindle center: 750 mm, table length: 900 mm, table load: 1,500 kg, type of input current: three-phase, table width: 600 mm, grinding wheel width: 50 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 300 rpm, overall weight: 11,000 kg, grinding spindle motor power: 11,000 W, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 2 m/min, travel distance X-axis: 660 mm, travel distance Y-axis: 500 mm, input voltage: 400 V, grinding wheel bore: 127 mm, Equipment: documentation/manual, CNC Surface grinder AMADA Techster 106 TECHNICAL CHARACTERISTICS: Year of manufacturing: 2017 CNC control: FANUC series 32i-B Colour touch screen: 15 ["] Maximum grinding lenght x width: 1000 x 600 [mm] W axis travel (longitudinal axis): 1300 [mm] Min. Stroke speed W axis: 0.1 [mm/min] Max. Stroke speed W axis: 40000 [mm/min] Rapid traverse rate W axis: 40000 [mm/min] X axis travel (transverse movement): 660 [mm] Min. Stroke speed X axis: 0.1 [mm/min] Max. Stroke speed X axis: 5000 [mm/min] Rapid traverse rate X axis: 5000 [mm/min] Resolution X axis: 0.0001 [mm] Stroke Y axis (vertical movement): 750 [mm] Min. Stroke speed Y axis: 0.1 [mm/min] Max. Stroke speed Y axis: 500 [mm/min] Rapid traverse rate Y axis: 2000 [mm/min] Resolution Y axis: 0.0001 [mm] Max. distance spindle nose / table: 750 [mm] Max. load on table: 1500 [Kg] Min. grinding wheel speed: 300 [rpm] Max. grinding wheel speed: 2000 [rpm] Grinding spindle motor power: 11 [kW] Max. diameter grinding wheel: 405 [mm] Max. grinding wheel width: 50 [mm] Grinding wheel bore: 127 [mm] Working hours: 2710 [h] Total power required: 29 [kVA] Weight: 11000 [Kg] EQUIPMENT / INCLUDED OPTIONS: 2-axis simultaneous 1x electro-magnetic chuck, 900 x 600 [mm] 1x automatic grinding wheel balancing device, MPM type 3.ESB.150A.114.CF 1x on-board measuring touch probe with compensation function 1x rotary dresser 1x NC swivelling rotary dresser 1x static straight dresser 1x paper tape filtration unit 1x oil chiller, DAIKIN AKZ149-C 1x oil mist extractor, IFS type M 1600 3x wheel flanges 3x grinding wheels 1x axis clamping kit 1x toolbox (service wrenches) Lasdpfxjxz Ecke Aanok 1x balancing arbor 1x transformer Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine similar to the brands Okamoto, Jones & Shipman, Jung, Favretto, Blohm, Studer; also consider cylindrical grinders, lathes, machining centers, milling machines.

Year of construction: 2017, condition: used, Power: 4 kW (5 HP) Tank pressure: 20 bar Volume: 1200 l Old Lodige KM 1200 D continuous mixer with ploughshares (year 1977) transformed into a mixer-dryer (year 2017) by the previous user. Modification made : New enclosure / mixing chamber in stainless steel 316. Change of motor transmission: belt -> geared motor Main material: 316 stainless steel Year: 2017 Type of drying: hot air blowing Without electrical cabinet With piping 1 – Ploughshare mixer 1200 L Motor manufacturer: SEW Power : 18,5 KW Material: 316 stainless steel + 2 manual butterfly valves + 2 manual Orbinox knife gate valves Porthole interior view Safety box suppression (brand : Vigilex) No manufacturer’s plate 2 – Fan n°1 Manufacturer: Kiekens Model : 8 KTEN 355 Year: 2017 Volume: 1204 m3 / H Power : 15 KW Temperature : 80°C Atex : yes Ex II 3D/G td nA 3 - Fan n°2 Manufacturer: Kiekens Model : 8 KTEN 280 Year: 2017 Laodpfxox Au Rge Aanjk Volume: 1204 m3 / H Power : 4 KW Temperature : 80°C Atex : yes Ex II 3D/G td nA 4 – Heat exchanger Manufacturer : Bronswerk heat transfer B.V Year: 1996 Exchange surface: 67 m2 x 2 Max pressure : 20 bar Max. temperature: 215°C Fluid : water or steam Volume : 17 L x 2 Temperature sensor connection 5 – Dust collection cyclone Year: 2017 With DMN Westinghouse rotary valve (type : butterfly) On frame 6 – Platform with stairs and mixer support Manufacturer: IJSSEL technology

Condition: new, Year of construction: 2021, functionality: fully functional, Stock machine "NEW" – available at short notice! (Subject to prior sale) Control: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine Table: Table size: 950 x 550 mm Ljdpoifn N Nefx Aaneak Load capacity: 800 kg T-slot width: 18 mm Number of T-slots: 3 Distance between T-slots: 150 mm Travel axes: Travel X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 – 700 mm Linear guides & speeds: Ball linear guides in X/Y axes Roller linear guide in Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feedrate during milling: 0 – 10,000 mm/min Smallest increment: 0.001 mm Tool magazine (CAM-Type) / changer: Number of magazine pockets: 30 System: random access Max. tool diameter: Ø 75 mm Max. tool diameter with adjacent pockets free: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/cont.): 18.5/11 kW 15,000 rpm direct-drive spindle Spindle oil cooler Coolant, chip, and compressed air management: Coolant system incl. 300 liter tank and pumps External coolant around spindle Chip augers right and left in machine bed Compressed air nozzle at spindle (M32/M33) Compressed air through spindle (M38/M39) Compressed air and coolant gun Other features: Swiveling operator panel Electronic handwheel (wired) Central lubrication oil/air Full enclosure Work light Heat exchanger at control cabinet Auto power-off function Hand tool set Signal lamp Transformer 400 VAC, 50 Hz CE declaration of conformity according to European directives Electrical and pneumatic requirements: Electrical connection: 36 kVA Required pneumatic input pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required installation area: W3,160 x D3,000 x H3,000 mm (incl. chip conveyor ejection to the left) Machine weight: approx. 5,400 kg (net) Available special equipment: Spindle: - Direct-driven spindle SK-40, 15,000 rpm - Drive power (30min/cont.): 18.5 / 15 kW, (FANUC motor) Tool magazine / changer: - Drum-type tool magazine with 30 pockets, DIN69871, SK-40 Rotary or additional axes: - Preparation for 4th axis (FANUC controls), incl. wiring and Harting connector, without axis drive Coolant, chip, and compressed air management: - Bed flushing - Through-spindle coolant pump, 20 bar pressure, for direct-driven spindles - Includes cartridge filter - Belt-type chip conveyor including chip cart (chip discharge at front, to the left side of the machine) Measuring and monitoring systems: - RENISHAW OMP-60 probe with infrared transmission system for workpiece measurement, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ tool laser measurement system and tool breakage monitoring in the machine, incl. bracket - Auto-door (side door) - Pneumatic interface for workpiece clamping - Clamping devices as shown With RoboJob Mill Assist 25kg (Year of construction 2025 – NEW) - Full enclosure - Double gripper Available immediately

Condition: excellent (used), Year of construction: 2017, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 17434268, type of input current: three-phase, input voltage: 400 V, electrical fuse: 63 A, input current: 61 A, input frequency: 50 Hz, pressure: 18 bar, stack height: 1,900 mm, total length: 1,600 mm, total width: 750 mm, tank capacity: 410 l, empty load weight: 315 kg, type of cooling: water, Machine Description and Technical Data 2.1 Machine Description The RED COMPACT units are delivered fully pre-assembled and require only electrical connection and hydraulic hookups on site. Main Components: A: Self-supporting frame with stainless steel cladding (panels 1–6 removable) B: Basin with evaporator C: Condenser unit D: Temperature controller E: Control cabinet F: Hydraulic circuit with pump (second pump optional) 2.2 Structure The compact monoblock housing contains all components necessary for operation. The external cladding is made of stainless steel; individual panels can be removed for maintenance purposes. 2.3 Basin The stainless steel basin houses the evaporator block. It is insulated with high-density polyurethane foam. A blower ensures water circulation within the basin. 2.4 Condenser Unit The condenser unit can operate with either cooling tower or well water, depending on order specification. It supplies the evaporator block and is located beneath the basin. 2.5 Temperature Controller The controller is a modern microcomputer with a high-resolution display and LED indicators for operating status. The control system is programmed to offer maximum operational safety with easy user operation. 2.6 Control Cabinet The control cabinet is dust- and splash-proof. It contains: - Main and emergency switch - Contactors, thermal relays, fuses Lodpfexvca Ajx Aaneak - Safety transformer for control circuits Access is provided by removing panel 1 below the temperature controller. 2.7 Hydraulic Circuit with Pump Panel 3 is removed for connection. The following connections are provided: A – Water make-up (T1): Connection to water supply; fill level is controlled via float valve. B – Return line (T2): Return flow from the consumers. C – Overflow (T3): Connection to the process wastewater outlet. D – Chilled water outlet (P1): Supplies the consumers; open the shut-off valve before commissioning. A second pump (P2) is available as an option. E – Condenser water supply: The shell-and-tube condenser can be operated with well water or cooling tower water: Scheme A – Well Water: Use the small connections C1, C2 (inlet and outlet). The large connection remains closed. A pressure-regulated valve control can be installed as an option. Scheme B – Cooling Tower Water: Use C3 and C1/C2 in parallel to increase the flow cross-section. It is recommended to install a mechanical filter at the water inlet to prevent contamination. Manufacturer: FIC S.p.A. – Via Trivulzia 54, 23020 Mese (SO), Italy Model: RED COMPACT V.7

Condition: used, TECHNICAL DETAILS - Number of axes : 6 - Number of spindles : 2 - Number of turrets : 1 MAIN SPINDLE - Spindle nose : A2-8" - Spindle power : 18.5 [kW] - Spindle speeds : 4000 [rpm] - Max. bar diameter : 90 [mm] Laedpfsx H Atyox Aanok - Max. turning diameter : 460 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle nose : A2-6" - Spindle power : 11 [kW] - Spindle speeds : 6000 [rpm] - C axis indexing precision : 0.001 [°] TURRET 1 - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 260/795 [mm] - Y stroke : +/-50 [mm] - Tool type : BMT - Live tools speed : 10000 [rpm] - Live tools power : 5.5 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 41 [kW] MACHINE HOURS - Number of hours under power : 21392.8 [h] - Number of working hours : 13797 [h] EQUIPMENT - CNC : CELOS - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming : MAPPS V - 3 colors status lamp - Coolant tank : KNOLL * with high-pressure pump : 70 [bars] * with paper filtering unit - Tailstock option with counterspindle - Chips conveyor - Tool probe - Parts catcher - Parts conveying strip - Bar loader : LNS QUICKLOAD - Electric transformer - Number of turning tool holders : 2 - Number of fixed tool holders : 10 - Collet chuck

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Manufacturer: Herrmann, Ultrasonic welding transducer, ultrasonic vibration unit -Welding transformer: Type KHS20-IP50-L -Horn/Ultrasonic Sonotrode: Type 400 see photos Lodpfjxyw H Ejx Aanjak -Number: 3x ultrasound transducer units available -Dimensions: 450/100/H70 mm -Weight: 4.8 kg/pc.

Year of construction: 2021, operating hours: 50 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 91007867, Ahlbrand Corona unit with transformer, exhaust fan, air monitoring, conveyor belt, new material jam detection – only used for testing purposes Original price over €22,000! Working width: 600 mm Lsdpfox Ekiyox Aanjak Weight: 197 kg Type of treatment: single-sided Material thickness: 100 - 1,000 µm 4 rectangular ceramic electrodes Exhaust connection: 80 mm Adjustable power stage with 3 kW output Power supply: 400 VAC Ahlbrandt generator

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Manufacturer: Herrmann, Ultrasonic welding transducer, ultrasonic vibration unit -Welding transformer: Type KHS20-IP50-L -Horn/Ultrasonic Sonotrode: Type 118.858/1 see photos Laodpfx Ajxyw Ensansk -Quantity: 1x ultrasound transducer available -Dimensions: 450/260/H70 mm -Weight: 7.8 kg