Used Transformers for sale (666)

Year of construction: 2003, condition: used, functionality: fully functional, D&K Acculam 2760 Laminator with Feeder, Exit tray and Transformer. Recently removed from a printshop. Machine has been in full working order and producing live jobs. Machine is sold Ex works. Laodpfx Asx Nawneanok No cutting unit is included. Machine is located in my warehouse in Tadley/Reading UK. Video in production on request. The D&K System 2760 (often referred to as the Acculam series) is a fully automated one-sided lamination system designed for high-volume, short-run digital and offset printing. It typically includes an automatic feeder, a laminator with curl management, and a flying knife separator. Technical Specifications Max Lamination Speed Up to 60 fpm (18 meters per minute) Max Sheet Size 26" x 30" (standard) or up to 28" x 40" (B1 version) Min Sheet Size 8.5" x 11" (21.6 cm x 27.9 cm) Paper Weight Range 80 lb. Text to 18 pt. Board (approx. 115–350+ gsm) Temperature Range 180°F – 300°F (70°C – 140°C) Warm-up Time Approximately 20 minutes Electrical Requirements 230 Volt, 30 Amp, Single Phase Air Requirements 6 cfm (some models may require up to 8 cfm) System Dimensions 5' W x 14' L x 5' H Key Features Feeding System: Utilizes a state-of-the-art automatic suction feeder and belt table to ensure accurate sheet registration. Adhesion Technology: The System 2760 DN variant features two sets of heated nip rollers specifically for better adhesion to difficult digital prints like Xerox iGen or HP Indigo. Curl Management: A patented decurling system ensures sheets lay flat even when using thin paper or thick films like polyester and nylon. Versatility: Supports both thermal (heat) and pressure-sensitive (cold) lamination with optional release liner take-up for PSA products.

Condition: ready for operation (used), Year of construction: 2008, General Data Machine weight 8300 kg Main Drive Number of spindles 2 Spindle speed range 5000 Spindle motor power 22 kW Number of axis 9 Additional Equipment Automatic Conversational Programming System: Mapps 4 Automatic Effort Control and Tool Consumption Monitoring Oil Cooler for Both Spindles Double Pedal for Chuck Opening and Closing Interface for Bar Feeder Installation Automatic Rear Part Catcher (Special Clamp for Long Parts) Side Chip Conveyor (Hinged Type) Communication Ports: USB, PCMCIA Card, RS-232 Includes Electrical Transformer, Documentation, Parts List, Electrical Schematics, Programming, and Operation Manual This 9-axis MORI SEIKI NZ2000 was manufactured in 2008, offering advanced capabilities for precision horizontal turning. Ideal for complex machining tasks, this machine ensures efficient production with its multi-axis configuration. Consider the opportunity to buy this MORI SEIKI NZ2000 horizontal turning machine. Contact us for more information about this machine. Application Types Ledpfxjx D R Ike Aansak Turning

Condition: used, mileage: 2,56,260 km, power: 130 kW (176.75 HP), first registration: 09/2022, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 09/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, Front-wheel drive, start-stop system with brake energy recuperation, LED headlights, rear step, smoker package, reversing camera, Media-Van package, Light & Visibility package, digital tachograph, entry handles on rear pillars, rear wing doors without windows, crosswind assist, hill start assist, emergency brake assist, swivel seats left & right, seat heating, digital radio reception (DAB+), parking sensors front & rear, side protection assist, BF3 escort vehicle equipment: bed with mattress, kitchen cabinets, tap, 12V water pump, canister, wall-mounted cabinet, bench seat with table, curtains for the front windows, Dometic sink, Waeco Dometic refrigerator, camping windows on driver and passenger side (700x450 mm) with fly screen and blackout, roof hatch, 2x 230V sockets, 2x 12V sockets, 2x light switches, LED lighting, voltage transformer 12V/230V 2000/1300W, switch for voltage transformer. Lodpfswu Nntsx Aanjak

Condition: new, Year of construction: 2025, Machine features This planer and thicknesser is a well-designed machine, providing large adjustment and mechanical machining possibilities of hard and soft wood. Adjustment itself is relatively simple and transforming the planer into a thicknesser takes only a couple of seconds. Relatively high weight (148 kg) ensures stability, and work safety, reducing vibrations with additional anti-vibration feet. Advantages of the planer Both tables of the planer are made of high-quality cast iron, with ground and Ra 1.6 polished surface Shaft guard can be freely set, adjusting its height, angle as well as extension Angular guide can be smoothly adjusted in the 90° – 45° range Planer tables involve additional sound dampeners decreasing noise Advantages of the thicknesser Thicknesser table is made of high-quality cast iron, with ground and polished surface Height is adjusted through a large and convenient handwheel, which, after adjustment, can be locked with an additional eccentric Its table is supported in 3 places Thicknessing can be lowered down to 190 mm Machine equipped with rollers (driving and receiving) which are located very close to the shaft, allowing for machining even short elements Roller feed drive is based on a belt, ensuring slip-free work (no "tooth marks" on the workpiece) Technical data Knife shaft diameter 75 mm Knife shaft speed 4800 rpm Extracting connector diameter 100 mm Swinging rule tilt angle 0–45° Number of knives 3 Maximum surface planer width 250 mm Maximum thickness planer width 248 mm Maximum surface planing height 180 mm Maximum thickness planer machining depth 3 mm Maximum surface planer machining depth 2.5 mm Thickness planer feed speed 6 m/min Dimensions (L×W) 1080×260 mm Weight 150 kg Motor power 2.0 kW Ljdpovxh Nrsfx Aanjak Power supply 3 phase, 400V

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2025, • Tous nos produits sont conçus avec soin et couverts par une garantie d'un an ! • Formation à l'installation et à l'exploitation gratuite. Les centrales à béton fixes de la série COMPACT offrent des solutions pratiques et efficaces pour satisfaire tous les niveaux de besoins. Les installations de centrales à béton stationnaires allient une capacité maximale et une efficacité optimale. La série COMPACT garantit un fonctionnement aisé et une efficacité optimale tout en maintenant des coûts abordables. De plus, cette usine utilise de manière précise les ressources de l'entreprise, ce qui se traduit par un gain de temps qui se transforme en revenus accrus. SPÉCIFICATIONS TECHNIQUES: Modèle: COMPACT 110 Capacité de production: 100 m3 Type de malaxeur : Malaxeur à double arbre – 2 m3 Tremie agrégé: 4 x 20 m3 Lsdpfxexvw H Re Aansak Ciment pesant: 900 kg Additifs pesant: 40 kg Pesage de l'eau: 700 lt Silo à ciment en option. COMPACT-110 se compose de : • Trémie de stockage d'agrégats • Trémie de pesée d'agrégats • Convoyeur de pesée d'agrégats • Convoyeur de transfert d'agrégats • Malaxeur à double arbre • Châssis du malaxeur, plates-formes de marche, échelle • Trémie de pesée d'eau • Trémie de pesée de ciment • Trémie de pesée d'adjuvant • Compresseur d'air • Convoyeur à vis pour le ciment • Silo à ciment boulonné • Filtre supérieur, soupape de sécurité et accessoires • Salle de commande avec climatisation • PC et système d'automatisation • Panneau de commande et d'alimentation POUR PLUS D’INFORMATIONS, N’HESITEZ PAS A NOUS CONTACTER!

Condition: like new (used), Year of construction: 2020, operating hours: 18,000 h, functionality: fully functional, As-new Gear Grinding Machine KLINGELNBERG VIPER 500 W Laodpfx Aajxx T N Tensk All-inclusive machine equipped for internal and external gearing Equipped with a special converter from EUR kW to US standard connection (simplified global connection) Available due to restructuring at a high-tech family-run company (no automotive production) Working Area and Capacities Max. workpiece diameter: 500 mm Max. grinding stroke: 500 mm Working area over table (min.–max.): 300 – 800 mm Distance between spindle center and table (min.–max.): 442 – 1042 mm Module (generating grinding module): 0.5 – 22 Swivel angle (min.–max.): –180° to +45° Grinding System Grinding wheel diameter (min.–max.): 221 – 350 mm Grinding worm diameter (min.–max.): 221 – 350 mm Max. grinding wheel width: 75 mm Max. grinding worm width: 150 mm Grinding spindle power: 37 kW Max. grinding wheel speed: 6000 rpm Table and Feeds Table diameter: 400 mm Table bore Ø × depth: 100 × 500 mm Max. table speed: 1000 rpm Max. axial feed: 20,000 mm/min Max. radial feed: 12,000 mm/min Max. tangential feed: 20,000 mm/min Connections and Dimensions Total connected load: 60 kVA Machine dimensions (L × W × H): 4220 × 3120 × 2526 mm Filter unit dimensions (L × W): 3490 × 2250 mm Net weight approx.: 19,300 kg Machine Configuration – VIPER 500 W Base Machine and Options VIPER 500 W base machine Preparation for internal grinding arms Internal grinding unit V5 for straight or helical internal gears Measuring system for profile, lead, and pitch of external gears Measuring system for profile, lead, and pitch of internal gears V5 Touch Trigger Phasing System Power supply with ESR voltage drop compensation 100 mm table adapter Preparation for hydraulic clamping devices Hydromechanical unit for drawbar clamping systems Grinding oil filtration system with band filter 100 Fire extinguishing system Automatic work area door Cleaning system with spray gun Crane/hoist integrated into enclosure Isolation transformer Voltage stabilizer and isolation transformer Signal light/beacon tower Software Packages Gear PRO software Software for grinding of spline shafts Software for testing of spline shafts BIAS control software for gear grinding CBN grinding wheel software ADI dressing process optimization DLC lifetime monitoring for dressing tools Flexible profile correction for grinding operations Consumables Endless filter band Assembly/disassembly aid for filter band 100 Diamond dressing rollers CVD dressing roller D200 R1 for profile grinding CVD special dressing roller for generating grinding Grinding wheels Grinding wheel D350 B60 for profile grinding Grinding wheel D350 B45 for profile grinding Profiled grinding wheel D350 B150 for generating grinding Distance rings/intermediate plates 4 intermediate plates B100 22 intermediate plates B60 30 intermediate plates B45 37 intermediate plates B30 Additional Components Grinding wheel flange without intermediate plate Set of standard probes / measuring probes Additional Options Warranty extension from 12 to 24 months Closed Loop 1.0 basic version Interface for external automation

Condition: like new (used), Several pieces in stock Solar inverter, Inverter 5 kW, SolarEdge SE5K-RW0TEBEN4 Ledoxukbxepfx Aanjak Manufacturer: SolarEdge Type: SE5K-RW0TEBEN4 Overall dimensions: 310 x 180 x 530 mm Built-in webserver with Ethernet connection for remote monitoring SetApp version – only the Wi-Fi antenna kit is required for communication High efficiency (max. 97.3%) Fixed conversion voltage Indoor and outdoor use (high protection class IP65) SmartGrid compatible Factory-installed MC4 connectors on the inverter 12-year manufacturer warranty, extendable up to 25 years for an extra fee Attention! The inverter operates only with SolarEdge-compatible smart modules or additional Optimizers! AC power

Condition: used, Year of construction: 2005, Roversi butter churns are specialized machines designed for the efficient and effective production of butter from cream. They are widely used in dairy processing plants due to their ability to produce high-quality butter while maintaining consistency, efficiency, and ease of use. Here's a detailed overview of Roversi butter churns: Overview of Roversi Butter Churns - Construction: - Roversi churns are typically constructed from stainless steel to ensure hygiene and durability. The materials used are often selected for their ability to withstand high temperatures and cleaning processes. - Design: - The design includes a large cylindrical container (or tank) where the cream is transformed into butter. These churns often come with a paddle or agitator system to ensure thorough mixing and churning. - Size and Capacity: - Roversi butter churns come in various sizes, accommodating different production scales, from small artisan operations to large . - Design: - The design includes a large cylindrical container (or tank) where the cream is transformed into butter. These churns often come with a paddle or agitator system to ensure thorough mixing and churning. Ledpfsx Iyp Isx Aanjak - Size and Capacity: - Roversi butter churns come in various sizes, accommodating different production scales, from small artisan operations to large industrial facilities. The capacity can range from several liters to thousands of liters. Features and Functions - Efficient Churning: - Roversi churns are designed to rapidly and effectively separate the butterfat from buttermilk through controlled agitation. This process can produce butter in a relatively short time. - Temperature Control: - Many models come with temperature control features, allowing for heating or cooling during the churning process. This is crucial, as temperature can significantly impact the texture and quality of the butter. - Quality Control: - The churns may include sensors and controls that monitor vital parameters (like mixing speed and temperature), ensuring consistent product quality. - Easy Cleaning: - Given the importance of hygiene in dairy processing, Roversi churns are designed to be easily cleaned and sanitized, often with smooth surfaces and accessible components. - Automation Features: - Many modern Roversi butter churns offer automated features, including programmable settings for various recipes and processes, which can enhance efficiency and reduce the need for manual intervention. Benefits of Using Roversi Butter Churns - Consistent Quality: - The precision in temperature and mixing allows for the production of high-quality, consistent butter. - Versatility: - These churns can often handle various cream types and fat contents, enabling producers to create different butter varieties (e.g., salted, unsalted, specialty butters). - Efficiency: - Roversi churns reduce processing times, increasing throughput and overall productivity in dairy operations. - Scalability: - They are suitable for both small-scale artisans and large-scale industrial production, making them versatile for different market needs. Considerations - Initial Investment: The cost of Roversi butter churns can be significant, so it’s essential to consider the return on investment based on expected production volumes. - Maintenance: Regular maintenance is necessary to keep the churn in optimal condition and ensure long lifespan. - Training: Operators should be trained on how to use the equipment properly...

Condition: good (used), Year of construction: 2012, Power: 320 KVA Lsdpjhzr Uyofx Aaneak 3x400 V / 3x 200 / 115V Year of manufacture: 2012

Condition: new, Year of construction: 2025, Machine features This planer and thicknesser is a well-designed machine, providing large adjustment and mechanical machining possibilities of hard and soft wood. Adjustment itself is relatively simple and transforming the planer into a thicknesser takes only a couple of seconds. Relatively high weight (148 kg) ensures stability, and work safety, reducing vibrations with additional anti-vibration feet. Advantages of the planer Both tables of the planer are made of high-quality cast iron, with ground and Ra 1.6 polished surface Shaft guard can be freely set, adjusting its height, angle as well as extension Angular guide can be smoothly adjusted in the 90° – 45° range Planer tables involve additional sound dampeners decreasing noise Advantages of the thicknesser Thicknesser table is made of high-quality cast iron, with ground and polished surface Height is adjusted through a large and convenient handwheel, which, after adjustment, can be locked with an additional eccentric Its table is supported in 3 places Thicknessing can be lowered down to 190 mm Machine equipped with rollers (driving and receiving) which are located very close to the shaft, allowing for machining even short elements Roller feed drive is based on a belt, ensuring slip-free work (no "tooth marks" on the workpiece) Technical data Knife shaft diameter 75 mm Knife shaft speed 4800 rpm Extracting connector diameter 100 mm Swinging rule tilt angle 0–45° Number of knives Lsdpfx Asvxh Nxoansak 3 Maximum surface planer width 250 mm Maximum thickness planer width 248 mm Maximum surface planing height 180 mm Maximum thickness planer machining depth 3 mm Maximum surface planer machining depth 2.5 mm Thickness planer feed speed 6 m/min Dimensions (L×W) 1080×260 mm Weight 150 kg Motor power 2.0 kW Power supply 1 PHASE, 230V

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive, inverter Lodoxx Rw Iopfx Aanjak -Manufacturer: Moeller, frequency converter -Type: DF5-322-018 -Power: 0.4 kW -Input: 230 V 50/60 Hz -Output: 3AC 0...Ue -Number: 1x inverter available -Dimensions: 130/90/H115 mm -Weight: 0.8 kg

Year of construction: 2025, condition: new, XX100292 New CNC Machining centre with 4 controlled axes FOM INDUSTRIE FMC 470 Machine in stock and ready for shipping Standard configuration: - Liquid-cooled electrospindle 7 kW, 20,000 rpm (HSK-F63) - 9 location tool magazine on head (HSK-F63) - No. 2 pairs of pneumatic vices with positioning through the travelling column - No. 2 pairs of low profile jaws for clamping wide profiles - Left pneumatic reference stop - Minimum quantity lubrication (MQL) with pure oil - Central automatic greasing system and device for manual greasing Ljdpsiv Imnofx Aaneak - Chip and waste collection tank in base - Perimeter guard system with automatically opening, front retractable doors - X FLOW (automatic orientation of lubricant nozzles) - Control: POWER-D - Movable control console - 24” display - FST CAM 4 program Optional equipment installed on the machine: - PR202941 Fixed tool magazine for 8 positions in the center on the machine base - PR202962 Device for checking the integrity and measuring tool length - ZR204058 Pendulum mode with multiple workpieces (2 work areas, 4 workpieces) and processing of non-standard lengths with X-PAL: • Two pairs of additional vices with independent positioning • Transformation of std vices into vices with independent positioning • LED bar • Profile positioning software • Software for viewing the progress of the processing cycle • Device for measuring profile length • Second X-FLOW • Right pneumatic reference stop • Pendulum control software • Safety devices for pendulum processing • Tunnel for oversized profile machining • Software to manage oversized machining operations • ''Clock'' time calculation module program - PR202971 Data import software in accordance to FOM protocol and wireless optical bar code and QR code reader - ZP715010 Module for rigid tapping and chase tapping - PR202957 Hinged belt conveyor with ramp - PR203389 Rear chip collection tank - PR202975 Tool set A3/HSK F63 - PR202967 Angle head with vertical disc Ø 230 mm - PR202968 Cone with horizontal disc Ø 250 mm - PR204497 Holder HSKF63 with cutter Ø 200 x 6 mm - PR203072 Software adjustment of the vice pressure 3,5 - 7 bar - ZP714611 License for the office version of FST CAM 4

Condition: good (used), Type: GCK-1000/15,- Rated Power: 1000 kVA Year of Manufacture: 1990,- Frequency: 50 Hz HV Voltage: 15750+5%−2×5% V LV Voltage: 400−231 V HV Current: 36.7/24.2 A LV Current: 1443.4 A Short-circuit Voltage: 6.07% Connection Group: DYN 5,- No-load Losses: 1700 W Lodjxz Uniopfx Aanoak Winding Losses: 10405 W Cooling: ONAN,- Active Part Weight: 2011 kg Oil Weight: 640 kg Total Weight: 3241 kg

Condition: as good as new (ex-display), Year of construction: 2024, Axolox 3021 CNC wood router - display machine available immediately - in 19mm Forescolor, consisting of a router table (X-axis), gantry (Y-axis), Z-axis unit made of compact board, and a base frame, with adjustable machine feet. Router bed as a sacrificial board made of 19mm MDF. Table openings pre-prepared lengthwise and crosswise. Mechanical set consisting of profile guides including profile guide carriages, recirculating ball screws, and precision racks. All elements assembled, pre-lubricated, including a test run, and immediately ready for operation. The control set consists of control cables, energy chains, planetary gears, stepper motors, high-performance power amplifiers, power supply, and toroidal transformer, fully pre-assembled in the control cabinet, as well as sensors for each axis. Switching relays for automatic control of the existing extraction system. Brush seals for dust protection, as well as CE-compliant safety devices with a mobile extraction system and a laser scanner mounted on one side for monitoring the work area, with a 275° and 5.5 m field range (positioning the machine in a corner of the room). A handheld control unit is equipped with all the necessary functions for operating the machine, including an emergency stop button and a deadman's switch. A tool length sensor is used to determine the tool length and change the active zero offset. A 2.2 kW high-frequency spindle includes a union nut, frequency converter, line filter, brake resistor, and collet set. A built-in monitor includes a mini PC with Windows 10 and Beamicon2 control software, as well as a mouse and keyboard, pre-installed in an ergonomic desk. A Rhino 7.0 CAD license and an Estlcam V11 CAM license, as well as all necessary documentation, will be sent by email prior to delivery. - Milling bed designed as a vacuum table Ljdpfx Aewdny Toanjak consisting of six adjustable sub-elements. Cross table made of PE with an MDF cover plate. Vacuum pump from Becker with an output of 160 m³/h, with an oil-driven rotor. A 16 amp, 400 V AC plug is required for the vacuum pump's power connection. The customer must provide 3 mm HDF raw on both sides for the entire vacuum table (3000 x 2100 mm) as a sacrificial plate. (Recommended use: machining coated chipboard) - Tool set: 10 pieces 2 x 5 mm TAC double-flute cutters 8 x 4 mm solid carbide single-flute cutters - Maintenance package: Including a 150 ml grease gun, a 400 g cartridge of high-performance grease, a 500 ml can of silicone spray grease, and a grease nipple - Clamping device as an attachment for the existing high-frequency spindle. Suitable for slightly curved and particularly thin materials. Location: From stock, 54634 Bitburg - Available immediately - Subject to prior sale

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, DC welding unit consist of: 1 pce. Welding controller BIHLER B 10 3 pcs. Welding transformer 1 pcs. Cooler unit Lasdpfx Ajvxkzqeanek Welding capacity: 3 x 70 kVA Capacity of the transformer 70 kVA at 50 % ED Power voltage: 400 V, 50 Hz.

Condition: excellent (used), Year of construction: 2024, operating hours: 314 h, functionality: fully functional, machine/vehicle number: LL393806057, total length: 8,470 mm, total width: 3,050 mm, total height: 2,370 mm, overall weight: 20,500 kg, Axe & Status Tuscan LL550 X 6000 5-Bedway Heavy Duty Lathe With Fanuc Series 0i-TF Plus CNC Control Laodpfx Ajx Ivzmjanek Running Time 314 Hours. Swing Over Bed Ø950mm. Centre Height Approx 575mm. Distance Between Centres Approx 6,000mm. Carriage Type Box (2 Box Way), Carriage Width Approx 955mm, Cross Slide Width Approx 450mm, Bed Width 990mm. Axis Travel 'X'=480mm, 'Z'=6,000mm. Feed Rate 'X'=0-3,000mm/min, 'Z'=0-3,000mm/min. (2) 'FCG-32C' Ø800mm x Ø320mm Through Bore 4-Jaw Manual Chucks (Front & Back of Spindle). (2) SMW Autoblok 'K4 ZSW' Programmable Steadies, Range Ø52mm - 280mm. Headstock Spindle Nose A2-20. Spindle Bore Ø305mm. Spindle 'X' Axis Servo Motor 3kW, 'Z' Axis Servo Motor 7kW. Spindle Speeds 7-400rpm (Motor 30/37kW), Morse Taper 6. V12-200 Hydraulic 12 Station Turret, 32mm Tool Size, Ø50mm Boring Bar Holder Dimension. Motorised Tailstock Body Movement, Quill Ø165mm, Quill Travel 250mm, MT 6. S/No LL393806057 (2024). Electrical Specification AC220V/50Hz, 3 Phase. Automatic Doors & Full Cover Guard, Motorised Fondex Front & Rear Chip Conveyors, Auto Lubrication & 15-Bar Coolant System, Air Conditioned Electric Cabinet, Halogen Work Lights, Unimag DS-2030-30 Disc Type Oil Skimmer, Yong Teng E04-AL60 kVA Transformer, Plus: (2) Steel Cabinets: (1) 500mm x 500mm x 800mm With 6 Drawers & (1) 1,000mm x 700mm x 1,000mm With 6 Drawers, Full Range Of Machine Manuals, Ø800mm 4-Jaw Manual Chuck (Already Described In Original Detail) With Backing Plate & Spare Jaws, (11) Assorted C6 Capto Adaptors Including Boring Bar Holders, Tool Blocks & Facing Tool Holder,; Boring Bar Attachment (To Hold up to 150mm). Overall Dimensions Approx 8,470mm x 3,050mm x 2,370mm High; Weight Approx 20,500kg.

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive, inverter Laodpfx Ajxx Rtioanjk -Manufacturer: Mitsubishi, Frequency converter inverter -Type: FR-A024-SO.4K-EC -Power: 0.4 kW -Input: 220-240 V 50/60 Hz -Output: 2.5A MAX 3PH AC200-240V 0.2-400Hz -Quantity: 1x Inverter available -Dimensions: 140/140/H150 mm -Weight: 2 kg

Condition: used, Year of construction: 1996, functionality: limited functionality, MAKA HC 57 R (Robot) CNC Machining Center 5-Axis Type HC-57 R / Machine No. 420 747 / Year of manufacture 1995 / Circuit diagram no. 320 177 The machine is operational and exceptionally robustly constructed (milling spindle, tool changer, vacuum pump, support, etc.) and equipped with existing electronics (control unit, circuit boards, transformer). It shows age-related wear in areas such as wiring, pneumatic lines, central lubrication lines, etc. Ljdpfx Aasx E Dp Tjnjak It runs and is ready for operation, but due to the above-mentioned wear, it is being offered as a source of spare parts or for refurbishment. Collection from 41334 Nettetal, workshop edge. Price negotiable. If no buyer is found for the assembled, complete machine, the machining center will be dismantled. The spare parts will then be offered individually. Interested parties in MAKA spare parts can contact us in advance regarding details or spare parts inquiries.

Condition: used, Year of construction: 2004, operating hours: 168 h, functionality: unexamined, machine/vehicle number: MA 3004, working width: 920 mm, stack height: 80 mm, product height (max.): 80 mm, control cabinet width: 400 mm, control cabinet length: 100 mm, control cabinet height: 150 mm, motor model: Nordson 3400 V, WRAPMATIC MA 3004 semi- automatic ream wrapping line includes logic programs, cable cabins, Siemens operating panel, frequency transformers, sensors, light shells, security lines, Nordson electrical motors, gearbox, transformers, AC source, ream counters, I/O-cards, main lines pressure monitoring switch, roller conveyors, belts, carousel, hot melt pot + hoses, pneumatic cylinders and lot of mechanical details. Capacity 10 – 14 reams per minute, depends on material. With inverter can be get more speed. The machine operated for around two weeks only as trial. Located in Alexandria, Egypt. Lodpoxr T Ezofx Aanoak Max sheet size : 920 x 1300 mm Min sheet size : 430 x 530 mm Ream thickness (max): 80 mm Ream thickness (min): 25 mm

Year of construction: 2024, condition: new, XX100329 CNC Machining Centre with 3 axes and worktable with pneumatic positioning at 0°/90°/180° FOM INDUSTRIE FMC 120 Machine in stock and ready for shipping Standard configuration: - Servo-ventilated three-phase spindle motor 3 kW, regulation of spindle rpm by numerical control - inverter (1000/17000 rpm) - 6 position tool-holder for manual change with pneumatic locking (ISO 30) - Pneumatic rotation of the work table 0° to 90° to 180° - Mobile control console with PC, 24'' Laodpfshlkqpex Aansk - No.4 pneumatic vices with manual positioning and double pressure with safety valves - Manuallly adjustable profile reference stops on right and left of work table - Minimum quantity lubrication (MQL) with pure oil - Perimeter safety casing on 3 sides and retractable front door - FST CAM 4 program Optional equipment installed on the machine: - PR204851 5-position automatic tool magazine (ISO 30) - PR207680 4-vice Easy-to-Set configuration: • Transformation of standard vices into vices with automatic movement and pneumatic locking • 2 retractable pneumatic side stops • SW for vice positioning - PR-28965 Beam rotation stop for intermediate angles with manual adjustment - PR204833 External stop with tunnel - PR202971 Data import software for data in accordance to FOM protocol with wireless bar-code reader - PR-27602 Tool set for aluminium - QN-28849 ISO 30 cone with milling cutter Ø 75 mm thickness 6 mm for end milling

Condition: good (used), Year of construction: 2023, Description Machine: Cincom B16E-VI Type: 5-axis precision lathe with FANUC 0i-TD control system We are offering the machines together with an Iemca Elite 112/32 bar feeder (year of manufacture 2023). Technical Data Machining: Main spindle max. bar diameter: Ø 16 mm Max. machining length without re-clamping: 135 mm Main spindle max. drilling diameter: Ø 6 mm Main spindle max. thread diameter: M 6 Sub spindle max. bar diameter: Ø 16 mm Sub spindle max. drilling diameter: Ø 5 mm Sub spindle max. thread diameter: M 3 Spindles, Tools and Axes: Main spindle speed: 200 ~ 8,000 rpm Sub spindle speed: 200 ~ 6,000 rpm Driven tool speed: 200 ~ 4,500 rpm C-axis indexing main spindle: 1° Maximum number of tool stations: 16 pcs Rapid traverse X, Y: 21 m/min Rapid traverse Z1, Z2: 15 m/min Tool holder: 10 x 10 mm Drive Power: Main spindle: 3.7 / 2.2 kW Sub spindle: 1.0 kW Driven tools: 0.5 kW Ljdpfxjvzg Sks Aanoak Coolant pump: 0.25 kW Central lubrication pump: 3 W Electrical Connection: 200 V, 50 Hz, 3-phase Main transformer: input voltage 400 V / output voltage 200 V Connected load: 5.2 kVA Pneumatic Connection: Compressed air connection: min. 5 bar Compressed air consumption: 44 NL/min Machine Data: Dimensions: 1,590 x 837 mm Machine height: 1,761 mm Spindle height (floor to spindle center): approx. 1,000 mm Machine weight: 1,150 kg Control – CNC contouring control Fanuc 01-TD Smallest input increment: 0.001 mm Smallest output increment: 0.001 mm (Z) / 0.0005 mm (X) Input options: Incremental and absolute Interface: RS232 Main and sub spindle synchronization Standard Accessories Working area lighting Signal light (red/yellow/green) Part ejection and discharge device Coolant tank and central lubrication Door interlock Part catcher and finished parts container 5 turning tool holders (10 x 10 mm) Coolant system with movable jet arms Power chucking system for main and sub spindles

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Manufacturer: Mitsubishi, Freqrol A024 frequency converter -Type: FR-A024-SO.4K-EC -Power: 0.4 kW -Input: 220-240 V 50/60 Hz Ljdpow S E D Refx Aansak -Output: 2.5A -Number: 3x inverters available -Price: per piece -Dimensions: 140/115/H150 mm -Weight: 1.6 kg/pc.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, The machine is offered with an Iemca Elite 112/32 bar feeder! TECHNICAL DETAILS Machining Main spindle max. bar diameter: 16 mm Max. machining length without regripping: 135 mm Main spindle max. drilling diameter: 6 mm Main spindle max. tapping diameter: M 6 Sub spindle max. bar diameter: 16 mm Sub spindle max. drilling diameter: 5 mm Sub spindle max. tapping diameter: M 3 Spindles Main spindle speed: 200–8,000 rpm Sub spindle speed: 200–6,000 rpm C-axis indexing on main spindle: 1° Rapid traverses Rapid traverse X, Y: 21 m/min Rapid traverse Z1, Z2: 15 m/min Tools Driven tool speed: 200–4,500 rpm Max. number of tool stations: 16 Tool holder: 10 × 10 mm MACHINE DETAILS Drive power Main spindle: 3.7 / 2.2 kW Sub spindle: 1.0 kW Driven tools: 0.5 kW Coolant pump: 0.25 kW Central lubrication pump: 3 W Electrical connection Operating voltage: 200 V Frequency: 50 Hz Phases: 3 Laedoxgd Rkopfx Aanok Main transformer input voltage: 400 V Main transformer output voltage: 200 V Connected load: 5.2 kVA Pneumatic connection Compressed air connection: Min. 5 bar Compressed air consumption: 44 NL/min Machine data Dimensions: 1,590 × 837 x 1,761 mm Spindle height (floor to spindle center): approx. 1,000 mm Machine weight: 1,150 kg Control Control type: CNC path control Fanuc 0i-TD Minimum input increment: 0.001 mm Minimum output increment: 0.001 mm (Z) / 0.0005 mm (X) Input mode: incremental and absolute Interface: RS232 Spindle synchronization: main and sub spindle EQUIPMENT Work area lighting Part ejector and removal unit Coolant tank and central lubrication Door interlock Parts catcher and workpiece container 5 turning tool holders 10 × 10 mm Coolant unit with swiveling spray arms Power chucking system for main and sub spindles

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive, inverter, Movidrive -Manufacturer: SEW Eurodrive, Inverter Movidrive Type MDX91A-0020-5E3-4-XXX -Power: 0.55 kW -Input: 3x 380-500 V 50/60 Hz -Output: 0-599 Hz -Control head: Type: MDX91A-0020-5E3-4-T01/CFN21A -Number: 2x inverters available -Price: per piece -Dimensions: 350/95/H210 mm -Weight: 4.1 kg/pc. Ledpfoxnw Tzsx Aanjak

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive, inverter, Movidrive Lajdjxxitbspfx Aanjk -Manufacturer: SEW Eurodrive, Inverter Movidrive type MDX91A-0032-5E3-4-XXX -Power: 1.1 kW -Input: 3x 380-500 V 50/60 Hz Output: 0-599 Hz -Control head: Type MDX91A-0032-5E3-4-T00/CFN21A -Dimensions: 360/100/H215 mm -Weight: 4.2 kg