Used Trapezoidal Sheet 310 135 for sale (11,948)

Condition: good (used), Year of construction: 2005, Gluing unit Motorized height adjustment Homatic NC 21 control unit Frequency converter Ncsdpfxeyvy D Is Ah Rep A20 hot melt adhesive unit for roll material up to 3 mm and strip material up to 20 mm edge thickness End trimming unit (two motors) Feed control LCD flat panel display Feed rate 18.5 m / min ? Feed rate steplessly adjustable 8–24 m/min or 12–24 m/min Minimum working width 55 mm at workpiece thickness 22 mm / 100 mm at workpiece thickness 60 mm depending on workpiece length Workpiece projection 30 mm Workpiece thickness 12–60 mm Workpiece thickness without contour milling and finishing unit min. 8 mm Jointing/milling unit Workpiece preheating A 20 gluing unit / A 34 hot melt adhesive unit Magazine for solid wood edging, strip material, and roll material Roll cutting device Pressure zone KL end trimming unit Release agent spraying device top/bottom Melting unit with granulate hopper instead of glue pot QA glue pot front section, quick-change (for color changes) Pre-milling unit Contour milling unit with interchangeable heads Universal milling unit Automatic multi-trimming unit, complete Finishing unit The illustrated return unit is not included in the scope of delivery. The data were taken from a data sheet and are therefore supplied without guarantee. Exact configuration on request.

Condition: excellent (used), Year of construction: 2019, operating hours: 3,500 h, machine/vehicle number: SX135H-364, mast type: telescopic, fuel type: diesel, color: other, Equipment: all wheel drive, Drivetrain Drive: Wheel Weights Empty weight: 21.713 kg Functional Lifting capacity: 454 kg Working height: 4.315 cm Ncedpfx Aheywrhbe Rjp Condition Technical condition: very good Visual appearance: very good Other information Reconditioned: Yes Delivery terms: FCA, DAP, EXW Max. horizontal reach: 2743 m Max swing of platform in degrees: 180 Rental currency: EUR Production country: US Additional information Please contact Sales Department for more information

Condition: excellent (used), Year of construction: 2000, Programmable and automatic machine for the production of sheet metal panels by forming multiple bends on all four sides. Ncedpfx Aow A Nnpsh Rjp

Condition: used, mileage: 1,39,000 km, power: 77 kW (104.69 HP), first registration: 07/2017, fuel type: diesel, overall weight: 3,140 kg, next inspection (TÜV): 08/2026, color: red, gearing type: mechanical, emission class: euro6, number of seats: 6, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Body/structure: Panel van double cab standard, LED cargo area lighting Ncjdpfjyrc Iysx Ah Rop Additional features: 3rd brake light, overhead storage compartment in cab, driver’s airbag, traction control system (ASR), audio system: radio/CD player with multi-function display, electrically adjustable and heated exterior mirrors, integrated indicator lights in exterior mirrors, rubber flooring in cargo/passenger area (fully covered), onboard computer, headliner in passenger area, tachometer, electronic brakeforce distribution (EBD), electronic differential lock (EDS), driver assistance system: hill start assist, driver assistance system: emergency brake assist, sliding window in cargo/passenger area: 1st row left, sliding window in cargo/passenger area: 1st row right, 165 A alternator, grab handle B-pillar, rear wing doors without glazing (180-degree opening angle), heater with recirculation function, interior filter: pollen filter, Isofix child seat fixtures, body/structure: high-roof panel van, body variant: medium-high roof, silver radiator grille, partition wall behind 2nd seat row, steering column (steering wheel) adjustable in height and reach, headlight range adjustment, truck registration, engine 2.0 litre – 77 kW TDCi CAT, front and rear parking sensors, manufacturing location: Otosan, wheelbase 3300 mm, full wheel covers, spare wheel matching tire size, low-emission according to Euro 6 emissions standard, right-side sliding door in cargo/passenger area, wide side protective moldings (body cladding), seat package 13: driver's seat (4-way adjustable) – double passenger seat, fabric, seats in cargo/passenger area: 1st row, 3-seat bench, partially painted bumpers, Trend trim, integrated rear step, tinted glazing, half-height trim in cargo/passenger area, second folding remote key. The vehicle is in good condition. New TÜV and emissions test available at an additional cost!

Condition: used, Used stainless steel clarifying filter press by Seitz Orion type OF 100/150. Press has 154 stainless steel filter plates with dimensions 1000 mm x 1000 mm and two end plates. Filtration surface approx 310 m2. Machine has hydraulic closure. Mounted on stainless steel frame. Includes feeding connections, manometers and local control panel. Specifications: Material: Stainless steel Plate Size: 1000 mm x 1000 mm Njdpfx Ahjyi Eygo Rocp # of Plates: 154 stainless steel filter plates Eyes: 4 Plate Type: Clarifying Surface Area: 310 m2 Closure: Hydraulic

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, operating hours: 854 h, year of last overhaul: 2025, Equipment: documentation/manual, Offered direct from first ownership: ----- THALMANN Double Folding Bending Machine – Model TD 150 – 6.4 m Series AB-SE - 6 –150 – S5 – DS 3000 / 1.50 mm (Re 275 N/mm²) DFT system ----- The machine was purchased new from Thalmann in 2020 and installed in our sheet metal workshop in 2021. With only 854 recorded pump hours, it has seen very little use and is therefore in excellent condition. The reason for sale is simply due to insufficient utilization of the machine. It can be inspected and tested at any time in the Munich area. Manufacturer: Thalmann Model: TD 150 - 6.4M Year of manufacture: 2020, 854 pump hours Condition: Excellent Category ID: 1472 Type ID: 1258 Machine type: Panel Folding Machine ---- Included additional equipment: - Freely running cutting unit, 1.5 mm steel, 1 unit - Curved clamping beam, ratio H x D = 1:2, 1 unit - Additional gripper/stop finger unit, 3 units - Clamping beams made from high-strength HARDOX steel, 1 unit - Hydraulic material thickness adjustment, 1 unit - Automatic sheet loading and handling table, 1 unit - Automatic sheet turning device, 1 unit - M-Guard remote maintenance support (instead of TeamViewer), 1 unit - LED bending line illumination with RGB color selection, 1 unit - Machine delivery, installation, and initial instruction, 1 service unit ----- Ncodpfxsyu Sbno Ah Rjp If you have any questions or need more information, please feel free to send us a message or call us.

Year of construction: 2009, condition: good (used), functionality: fully functional, machine/vehicle number: 0-286-21-0481, BARGSTEDT automatic panel storage system Base area: 26 x 10.5 m Overall height: 3.75 m (to top edge of crane) Stacking height: max. 2.5 m The storage system can be used for flexible feeding of a panel saw, a nesting machine, or as a convenient panel warehouse with automatic retrieval. Storage positions are freely programmable. Important: The control software was updated in 2019 to TLF woodStore, version 7.12.6.0. Ncsdpfx Aeyv Axneh Rep

Condition: excellent (used), functionality: fully functional, You are bidding here on: a branded machine – bending brake from a very reputable and well-known manufacturer – Schechtl. Machine features: - Schechtl MA folding/bending brake - Bends cleanly – test available - Angle indicator - Bending length: slightly over 2m - Material thickness: up to 2 mm for steel sheets; for aluminium, zinc, etc., up to approx. 3 mm - Standard rail (radius rail for aluminium and zinc is available as an optional extra, as well as attachment and special rails) - Foot switch operation - Optional back gauge possible Optional: - HT 200 guillotine shear or Schröder electric guillotine shear, 2m – 2.5 mm, can also be supplied on demand Important: Optionally, you can find and purchase a wide range of machines and accessories related to sheet metal and steel processing (such as bending brakes, guillotine shears, drilling machines, roll bending machines, slitting and profiling machines – as well as accessories like beading devices, roll sets for gutter production, rear gauges, etc.), as well as hand tools and spare parts from many leading manufacturers, directly from our shop. I am always available to answer your questions. You will receive an invoice according to §25a UstG (differential taxation); VAT is included in the invoice amount. Free loading is possible – weight approx. 1650 kg. Inspection and testing can be arranged by phone and are expressly encouraged. Nedox Ruphepfx Ah Rscp Payment in cash upon collection. Take advantage of our experience and technical expertise – we are happy to advise you. Collection by the buyer (or by a forwarding agent commissioned by the buyer) should take place within 10 days after the end of the auction.

Condition: excellent (used), Year of construction: 1999, beautiful veneer saw with planing unit cutting length 3100 mm with rear fence Ncsdpfxeq Rb Irj Ah Rop

Condition: used, Year of construction: 1995, pressure 135 t Nsdpfsyn R Hpjx Ah Rocp bevel length 4000 mm distance between columns 3150 mm column arm 270 mm total power requirement 15 kw dimensions 4030 x 1440 x 2420 mm machine weight ab. 9500 kg Equipment: - MNC 10 control unit - Electric backgauge ( X ) - Positioning of the depth adjustment ( Y1 Y2 ) - 2 stop fingers, manually adjustable - Rear side guard - Upper and lower tool

Condition: used, Year of construction: 2005, total length: 3,940 mm, total width: 1,980 mm, total height: 2,010 mm, Empty weight: 7.000 kg Price: On request Working width: 950mm Working height: 0,5-120mm - Year: 2005 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: - Drive system: CNC - Number of stations [pcs]: 3 - └ Station type 1: Abrasive belt - └ Station type 2: Rotary brush - └ Station type 3: Rotary brush - Power [kW]: 39 - Min. sheet thickness [mm]: 0.5 - Max. sheet thickness [mm]: 120 - Max. working width [mm]: 950 - Transport dimensions: 3940mm x 1980mm x 2010mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 4 Nedsxwnbuepfx Ah Rjcp Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, mileage: 1,64,388 km, power: 70 kW (95.17 HP), first registration: 03/2012, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 3,670 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro5, suspension: steel, number of seats: 3, total length: 6,130 mm, total width: 2,020 mm, total height: 2,640 mm, loading space length: 3,320 mm, loading space width: 1,780 mm, loading space height: 1,920 mm, Year of construction: 2012, Equipment: ABS, air conditioning, central locking, electric window regulation, traction control, = Further Options and Accessories = - Halogen lamp - None - Manual - Fabric - Partition wall Ncedpfeyqvk Sex Ah Rjp = Remarks = Configuration: 4x2, Payload: 1,419 kg, Unladen weight: 2,081 kg, Gross weight: 3,500 kg, Trailer load, unbraked: 750 kg, Centre axle trailer load, braked: 2,000 kg, Cab type: Single cab, Air conditioning, Number of airbags: 1, Parking aid: rear, Electric windows, Partition wall, Colour: white, Lighting type: halogen lamp, Engine power: 70 kW (94 hp), Fuel: diesel, Euro: 5, Drive type: timing chain, Transmission: manual, Gears: 6, Power steering, ABS, ASR, starter battery, Body type: extended, additionally raised, Rear step, Roof rack: none, Side doors: 1, Rear closure: double doors, Central locking, Seats: 3, Seat configuration: 1+2, Seat upholstery: fabric, Seat adjustment: manual, Spare wheel, Tyre type: summer tyres = Further Information = General Information Number of doors: 1 Registration number: 6-VTJ-83 Axle Configuration Tyre size: 235/65R16 Brakes: disc brakes Suspension: leaf suspension Axle 1: Tyre tread left: 5 mm; Tyre tread right: 5 mm Axle 2: Tyre tread left: 5 mm; Tyre tread right: 6 mm Weights Unladen weight: 2,081 kg Payload: 1,419 kg Gross vehicle weight: 3,500 kg Functional Loading height: 60 cm Maintenance APK (Dutch MOT): valid until 11/2026 Condition General condition: average Technical condition: average Visual condition: average Damages: none Number of keys: 1

Condition: excellent (used), Motorized folding bench, swing bending machine, bending machine (used) Manufacturer: GEKA Ncsdpfeyvuh Uox Ah Rep Model: MA 200 Year of manufacture: 2003 Working length: 2040 mm Max. sheet thickness for St 37: 3 mm Max. sheet thickness for Al, Al Mg 3: 4 mm Max. sheet thickness for V2A: 2 mm Opening width of the upper beam: 180 mm Adjustability of the lower beam: 60 mm Max. bending angle: 135° Backgauge, mechanically adjustable by hand: 0 – 750 mm Weight of the machine: approx. 2600 kg Drive power: 3 kW Required space (L x W x H): 3600 mm x 2000 mm x 1400 mm The machine comes from a research center and is in very well-maintained condition. Forklift available for free loading onto truck Affordable shipping available Location of the machine: 48477 Hörstel

Condition: used, mileage: 8,07,551 km, power: 228 kW (309.99 HP), first registration: 08/2000, overall weight: 26,000 kg, gearing type: mechanical, emission class: euro3, loading space length: 7,750 mm, Equipment: tail-lift, Iveco Cursor 310 16-speed manual transmission 6x2 axle configuration Loading platform 7.75 meters Ideal for machinery/tractor transport Hydraulic loading ramp Hydraulic winch Nodpfx Aheywc Dto Recp French registration Price: €11,250 net

Condition: ready for operation (used), Behringer automatic metal bandsaw, electrically controlled stop, infeed side 15 m, outfeed side 7.5 m Ncedpfsw Tri Aox Ah Rsp

Condition: excellent (used), Year of construction: 2006, operating hours: 8,513 h, functionality: fully functional, machine/vehicle number: 8042942323C, We are offering this refurbished Gildemeister CTX 310 V4 CNC SIEMENS 840 D SHOPTURN CNC turning and milling center, year of manufacture 2006. Serviced and prepared for transport Extensive tool accessories included, such as tool cabinets and measuring devices Year of manufacture: 2006 Weight: 3950 kg Maximum spindle speed: 6000 rpm Connected load: 26 kVA Max. connection current: 35 A Current: 38 A Mains voltage: 400 V Frequency: 50/60 Hz Control voltage: 230 V Ncsdpsyvfq Ssfx Ah Rep Control power consumption: 150 W Internal voltage: 24 V If you have any questions or need more information, please feel free to send us a message or call us.

Condition: new, mileage: 1 km, power: 228 kW (309.99 HP), fuel type: diesel, tire size: 315/70R22.5, axle configuration: 4x2, wheelbase: 5,700 mm, fuel: diesel, driver cabin: day cab, gearing type: automatic, number of gears: 8, emission class: euro6, suspension: other, Year of construction: 2025, Availability Stock status: Expected soon Technical Information Number of cylinders: 6 Njdow Uf D Njpfx Ah Rscp Engine displacement: 6,700 cc Transmission Transmission: ZF Powerline, 8 speeds, automatic Axle Configuration Tire size: 315/70R22.5 Brakes: Disc brakes Front axle: Max. axle load: 8,000 kg; Tire tread left: 100%; Tire tread right: 100%; Suspension: Parabolic suspension Rear axle: Max. axle load: 13,000 kg; Tire tread left: 100%; Tire tread right: 100%; Suspension: Air suspension Condition Overall condition: Very good Technical condition: Very good Visual condition: Very good Damages: None Warranty Warranty: None

Condition: used, functionality: fully functional, Year of construction: 2015, Cutting and rewinding material: - Galvanized, painted steel and aluminium with thickness from 0.3 to 3.0 mm - Max. input sheet width is 1,550 mm - Strip widths from 32 to 1,550 mm - Line speed up to 50 m/min - Decoiler load capacity: 12,000 kg Maximum coil width: 1,550 mm Coil inner diameter: from 480 mm to 620 mm Mandrel expansion: hydraulic Ncedpfxoygrv Ae Ah Rsp Cut-to-length: up to 3,000 mm

Condition: excellent (used), mileage: 1,65,519 km, power: 232 kW (315.43 HP), first registration: 09/2002, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,000 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 16, emission class: euro3, number of seats: 2, total length: 7,450 mm, total width: 2,460 mm, total height: 3,300 mm, Year of construction: 2002, Structure Construction year: 2002 DAF CF75-310 165,000 km Ncjdpjyvu H Rsfx Ah Rep 09-2002 EURO 3 Manual transmission KOKS High-Pressure Flushing Truck Capacity: 9,700 Liters Sterling Fluid System vacuum pump: Type VWSI 8020/181, 27 m³ / hour High Pressure Pump: WOMA 276 Liters / Minute, Max.: 200 Bar Hydraulic Reel = More information = General information Cab: single Registration number: BN-FJ-78 Technical information Number of cylinders: 6 Front axle: Steering Rear axle: Double wheels Make of engine: DAF Weights Empty weight: 11.060 kg Carrying capacity: 9.440 kg GVW: 20.500 kg Functional Make of bodywork: Koks Water tank: 9.700 l Maintenance APK (MOT): tested until 09/2026 Condition Technical condition: very good Visual appearance: very good Number of keys: 2 = Dealer information = For more photos see: Why you buy from Thomas Trucks? That choice is simple. Thomas Trucks is one of the independent trading companies worldwide in the field of used commercial vehicles. Here you can choose from an ever-changing stock of second hand trucks, tractors, trailers and trailers. Our offer includes all European brands, construction years and price ranges. Here you will always find a good vehicle for the right price! Thomas Trucks always has: - Sharp prices - Good service - Spacious, rapidly changing stock - Known quality - Decent business - We speak many languages - Accompaniment input and transport - (Export) license plate quickly arranged - Professional technical services - And more. Visit the website: and view our complete range and competitive offers We are open 6 days a week. Do you need help with exporting, importing, or shipping your vehicle? Contact our sales team. Selling your current vehicle to us is also possible. We do our best to display the data as accurately as possible, however no rights can be derived from this data We can also arrange financing for you within the Netherlands.

Condition: excellent (used), Robland multi-function woodworking machine, combination panel saw and thickness planer Ncsdpfxoytdfpe Ah Rep

Condition: excellent (used), Year of construction: 2005, Connection values: Single phase, AC 50 ... 60 cycles Voltage switchable 200/220/240 V ± 10 % Power consumption: 110 W Heat emission: 95 kcal/h Application: Form depth 3…12 1/2" // Form width 148…470 mm Paper weight: Single webs 45…170 g/m2 // Multiple sets 125 ... 300 g/m2 Stack height up to ca. 300 mm The machine worked together in production with Ncodpfx Aexmhhysh Rsp MICRO-FORMS LABELLER 18S (Sticks labels on sheets) // Ref. No.: 40016.25

Condition: used, Year of construction: 2005, Single-sided edge bander designed for precise and stable edging of solid wood and panel components (chipboard, MDF, laminate). The machine is conceived as a compact yet fully equipped solution for small- and medium-batch production, with an emphasis on edge processing quality. A robust cast iron frame ensures high rigidity and long-term geometric stability of the machine. It features a classic continuous conveyor with a pressure belt and a complete set of machining units for finishing the edge in a single pass. Technical configuration of the machine: - Pre-milling unit - Material pre-heating - Automatic EVA glue application Nodpfx Ahoyfw Sye Rjcp - EVA glue roller - Front and rear end trimming saws - Rough trimming unit - Corner rounding unit - Radius scraper - Glue scraper - Grooving unit - Brushing unit - Return conveyor

Condition: new, Year of construction: 2025, machine/vehicle number: XPD00285, fuel type: diesel, power: 248 kW (337.19 HP), motor manufacturer: Cat C9.3B, General information Field of application: Construction Weights Empty weight: 4.784 kg Functional Ncedpfx Ahjt D Uhze Rop Generator capacity: 310 kVA CE mark: yes Other information Fuel consumption: 62.6 Liter / hour at 100 % Load Generator: Cat LC5114N Frequency: 50/60 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 667 l Transport dimensions (LxWxH): 4,085x1,514x2,277 Production country: CN Additional information Please contact Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = - Noise Rating: 67.2 dB at 7m and 100% Load - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / EU Tier IV final

Condition: like new (used), Year of construction: 2023, operating hours: 58 h, functionality: fully functional, machine/vehicle number: 6523036, working width: 650 mm, sheet thickness aluminum (max.): 150 mm, warranty duration: 12 months, grinding width: 650 mm, GECAM G65RRR Surplus to requirements with only 58 hours working time Ncodpfx Ahjwnukms Rep This machine has been re-configured to have one abrasive belt and two subsequent ScotchBrite barrel brushes ideal for processing smaller sheet metal profiles. 650mm processing width Tampico cleaning brushes on the back end of the conveyor also included. Dust extractor not included but options can be discussed Machine widely used in the automotive sector at manufacturing sites supplying BMW etc 6 months free abrasive belt supply from Finishing Aids and Tools Ltd for this machine (5 belts per position per month) For a full quotation, technical information or any questions you might have about this machine please contact us

Condition: good (used), Year of construction: 2009, operating hours: 3,402 h, functionality: fully functional, machine/vehicle number: 2449-02, working width: 1,350 mm, type of input current: DC, overall weight: 6,000 kg, input voltage: 400 V, nominal power: 68 kW (92.45 HP), The machine is from 2009. Original price 200,000 CHF. Fully functional, with infeed table and dust extraction connection. Equipped with 2 sanding rollers and 1 disc for grinding and deburring. Various sanding belts included, as well as 1 disc for edge rounding. Condition as shown in the pictures. The machine has 3402 operating hours. It was only used for the processing of visible surfaces. Ncedpfxsyu Hlus Ah Rjp