Used Traub Tnm 42 for sale (97)

Condition: like new (used), Year of construction: 2022, operating hours: 13,116 h, Max. bar capacity mm: 20 Max. Z-axis travel (sliding headstock/fixed headstock) mm: 205 / 80 Max. spindle speed rpm: 10,000 Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 C-axis resolution degrees: 0.001 Max. rapid traverse Z m/min: 20 Tool stations: 8 Driven tools: 8 Max. tool speed rpm: 12,000 / 8,000 Tool holder diameter mm: 45 Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Bedpfx Aewuddvebzsdi Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 / 165 Slide travel Y mm: ±25.4 Slide travel Z mm: 254 / 567.5 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 B-axis swivel angle degrees: 105 Lower turret: Tool stations: 8 Driven tools: 8 Max. tool speed rpm: 12,000 Tool holder diameter mm: 45 Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 Slide travel Y mm: ±25.4 Slide travel Z mm: 155 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 Back working device: Tool stations: 4 Slide travel X/Y/Z mm: 120 / ±25.4 / 155 Tool holder diameter mm: 25 Sub spindle: Max. spindle bore mm: 20 Max. spindle speed rpm: 10,000 Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 Slide travel X mm: 235.5 Slide travel Z mm: 258 C-axis resolution degrees: 0.001 Rapid traverse X/Z m/min: 20 / 40 Coolant system basic unit: Pump pressure bar: 3 / 8 Tank capacity l: 250 Flow rate at 3 / 8 bar l/min: 80 / 120 Filtration degree µm: 200 Machine dimensions Length x width x height mm: see installation plan* Weight kg: 5,000* Connected load kW: 40 (47 kVA)

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 5318, spindle bore: 26 mm, spindle speed (max.): 4,750 rpm, TECHNICAL DETAILS Max round diameter: 26 mm Max square size: 18 mm Max hexagon size: 22 mm Spindle power: 2.2 kW Number of spindles: 4 Spindle bore: 26 mm Speeds: 1,180 – 4,750 rpm Bsdewtq Urepfx Abzodi Tool holder: 6 slots MACHINE DETAILS Length L -- R: 1,800 mm Width F -- B: 1,000 mm Height: 1,400 mm Weight: 800 kg Total power: 3.2 kW Operating voltage: 380 V 50 Hz

Condition: used, Year of construction: 1983, functionality: limited functionality, turning diameter over cross slide: 160 mm, turning length: 800 mm, spindle bore: 60 mm, travel distance X-axis: 205 mm, travel distance Z-axis: 810 mm, rapid traverse Z-axis: 10,000 m/min, rotational speed (max.): 3,150 rpm, total height: 1,800 mm, total length: 1,800 mm, total width: 3,300 mm, swing diameter over cross slide: 160 mm, turning diameter over bed slide: 360 mm, overall weight: 3,100 kg, Technical details: TRAUB TND 360 (1983) Rotation diameter over bed: 360 mm Rotation diameter over cross slide: 160 mm Turning length: 800 mm Longitudinal stroke (z axis): 810 mm Axial stroke (x axis): 205 mm Control: TX-8 Spindle clearance: 60 mm Bdjdpfxowm Dhxs Abzsi Speed: 63 - 3150 / 2 steps rev. Feed:: 10,000 mm/min. Turret head - number of stations: 8 Tailstock holder ISO: SK30 DIN 2080 Tailstock quill stroke: 105 mm Working pressure: 40 bar Total power requirement: 38 kW Machine weight approx.: 3.1 tons Machine dimensions approx. L x W x H: 1.8 x 3.3 x 1.8 m Hydraulic system dimensions: 580 x 400 x 750 mm Equipment Lathe chuck Ø 200 mm (without jaws), hydraulic

Condition: good (used), Year of construction: 2005, operating hours: 32,870 h, functionality: fully functional, machine/vehicle number: 6030578, turning diameter: 32 mm, spindle speed (max.): 8,000 rpm, bar diameter (max.): 32 mm, We offer for sale Traub TNL26K automatic cnc lathe. Machine is connected to power and can be inpected every time by prior appointment. Year of built: 2005 Spindle passage 32mm Bjdpjvldx Ajfx Abzodi Main spindle: 6.7/10.7kW; 8000rpm Counter spindle: 6.7/10.7kW; 8000rpm Upper turret: 12pos. 12x12/16x16, driven tools 2/5.5kW, 0-6000 rpm, 6.4/21 Nm Lower turret: 12pos. 12x12/16x16, driven tools 2/5.5kW, 0-6000 rpm, 6.4/21 Nm Connected load: 24kW Barfeeder: FMB Turbo 5-42/4200mm Swarf conweyor: Knoll 240 S1/100 Coolant Kompaktbandfilter: Resy Machine is sold with a lot of toolholders not driven and driven - list on attached photo.

Condition: excellent (used), Year of construction: 2000, operating hours: 49,274 h, functionality: fully functional, machine/vehicle number: 247, turning length: 80 mm, spindle speed (max.): 12,000 rpm, feed length X-axis: 35 mm, feed length Y-axis: 37 mm, feed length Z-axis: 75 mm, bar diameter (max.): 12 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control: Mitsubishi TX-8i Turning length: 80 mm Main spindle Technology: belt spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Bar capacity: 12.7 mm Travel path in Z1: 75 mm Workpiece clamping: collet chuck Counter spindle Technology: belt spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Travel path in X3/Z4: 222 mm / 139 mm Rapid traverse in X3/Z4: 30 m/min Workpiece clamping: collet chuck Tool carrier I (X/Y) Technology: turret with 6 stations (total drive) Tool holder: Ø 25 mm Tool drive: 8,000 rpm, 1.5 kW, 2.4 Nm Travel path in X1/Y1: 35 mm / 37.5 mm Rapid traverse in X1/Y1: 15 m/min Front attachment Number of stations: 4 Tool holder: Ø 28 mm Pitch spacing: 32 mm Tool drive: 12,000 rpm, 4 kW, 7 Nm Number of driven stations: 4 Travel path in X3/Z3: 222 mm / 139 mm Rapid traverse in X3/Z3: 30 m/min Rear attachment Number of stations: 4 Tool holder: Ø 28 mm Pitch spacing: 32 mm MACHINE DETAILS Dimensions: 1,450 x 950 x 1,480 mm Weight: 1,600 kg Bdjdpovrz E Hsfx Abzoi Connected load: 16 kW Installation dimensions: 7,943 x 1,430 x 1,480 mm Control switch-on time: 96,171 h Switch-on time: 100,147 h Production time: 45,983 h Spindle 1: 49,274 h Spindle 2: 47,771 h Spindle 5: 15,297 h EQUIPMENT - Chip management: Chip conveyor - Coolant management: KSS pump - Raw material feed: Bar loader, FMB minimag 3200 - Finished part removal: Workpiece removal device (pipe) - Emulsion mist extraction: Interface mechanically prepared - Tool holder: Various rigid and driven holders

Condition: good (used), Year of construction: 1990, Manufacturer: Traub, model TNS 60, control unit: TX8-D, operating hours: 2,321, serial no.: 1407, year of manufacture: 1990 FROM TRAINING WORKSHOP Bdodpfx Ajw Hdwgobzoi

Condition: used, Grinding wheel puller, cup wheel puller, double bench grinder puller, flat grinder puller, cylindrical grinder puller, puller head, dressing head for grinding machines -Number: 1x disc puller available -Price: per piece -Dimensions: 325/130/H135 mm Bdsdjd R Ikdepfx Abzei -Weight: 7.3 kg

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 25//16455, rotational speed (max.): 2,800 rpm, rotational speed (min.): 1,400 rpm, turning length: 65 mm, TECHNICAL DETAILS Turning length: 65 mm Thread length: 40 mm Bdsdpfx Aewtq Uljbzei Max. part length: 65 mm Motor speeds: 1,400-2,800 rpm MACHINE DETAILS Total power requirement: 2.6 kW Machine weight: 0.7 t Required space: 1,200 x 700 x 1,600 mm Main voltage: 415 V

Condition: good (used), Year of construction: 1996, CNC turning center TRAUB Type:TNC65 DG Year 1996 Control TRAUB TX8F Bdodpfx Absu Eug Iezsi With lots of accessories.

Condition: used, Year of construction: 2006, operating hours: 37,000 h, functionality: fully functional, TRAUB TNX65 with bar feeder and accessories Year of manufacture: 2006 Operating hours: 37,000 h Control: TX8i - Two tool turrets resealed - High-pressure pump replaced - Machine fully functional - Geometry within manufacturer's tolerances Accessories: - 2x Hainbuch chucks Bodpfswm Igfsx Abzedi - Various tool holders (see images) - Breuer bar feeder (1200 mm) - Number of spindles: 2 - Number of turrets: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main spindle chuck diameter: 175 mm - Minimum C-axis resolution: 0.001 [degrees] COUNTER SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 [kW] - Spindle speed: 7,000 [rpm] - Max. bar diameter: 42 [mm] - Minimum C-axis resolution: 0.001 [degrees] - Travel: 700 [mm] LEFT UPPER TURRET - Number of positions: 10 - Number of motorized positions: 10 - X/Z travel: 175 / 650 [mm] - Y travel: +/- 40 [mm] - Tool type: VDI 30 - Driven tool speed: 6,000 [rpm] - Driven tool power: 5.5 [kW] RIGHT LOWER TURRET - Number of positions: 10 - Number of motorized positions : 10 - X/Z travel: 175 / 650 [mm] - Y travel: +/- 40 [mm] - Tool type: VDI 30 - Driven tool speed: 6,000 [rpm] - Driven tool power: 5.5 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total drive: 95 [kW] WEIGHT AND DIMENSIONS - Space requirement: 5,450 x 2,318 [mm] - Machine height: 2,258 [mm] - Machine weight: 10,000 [kg]

Condition: reconditioned (used), Year of construction: 2005, functionality: fully functional, Traub CNC lathe TNC65DGY, TX8I, year 2005, serial no. 1130 Description Y-axis on S1, V-axis, 2x C-axis, 2x rotary tool drive, 2 VDI30 turrets, Hainbuch BZI65 on main and counter spindle, parts gripper, Iemca Master 880MP-E loading magazine, Condition Very well maintained, good condition, serviced. Machine geometry has been checked and corrected/adjusted. Bdjdpfjwi I Eysx Abzsi Machine can be viewed under power – video available. 6-month warranty on main components as follows: Spindle bearings, ball screws, linear guides, clamping cylinders. The warranty expressly applies only to spare parts, not to downtime, labor, or travel time. The warranty expressly does not apply to parts other than those listed above, e.g., wear parts, electrical, electronic, hydraulic, etc.

Condition: used, functionality: fully functional, Traub automatic lathe Bdsdjwcqv Iopfx Abzsi

Condition: used, dial indicator, dial gauge, measuring probe, measuring probe, precision dial gauge -Manufacturer: Traub, precision dial gauge -Measuring range: 0-5 mm -Reading accuracy: 0.01 mm .: Hoffmann 43250 5/40 -Number: 4x dial gauge available -Price: per piece -Case dimensions: 105/60/H25 mm -Weight: 0.1 kg/piece Bodpfx Aeurn R Sebzsdi

Condition: excellent (used), Year of construction: 1991, Multi-spindle & bar turning machines TRAUB TD 26 1991 * Spindle power 2.2 kW * Number of spindles 4 * Spindle bore 26 mm * Speeds 1.18 > 4750 mm * Total power 3.2 kW * Length L - R 1800 mm * Width V - H 1000 mm * Height 1400 mm * Weight 800 kg * Tool changer 6 tools Additional information * Max. round: 26 mm, max. square: 18 mm, max. hexagon: 22 mm * Bdjdpfjwc Aqwex Abzoi * Bar loader available

Year of construction: 2005, condition: good (used), 7th piece-driven tool holder Suitable for CNC lathe TRAUB TNA 480 tool holder size VDI 40. Also fits SAUTER tool turrets with VDI 40 holder. Bedpshwnfkofx Abzedi 7th piece Horizontal No.3/4/5/6/7/8/9/ for drilling and milling Price per piece 550,-€ 2nd piece Horizontal No.1 and No.2 for tapping Price per piece 600,-€ 1.NC - Drill chuck VDI 40 clamping range 1-13mm Price 100,-€ 1.NC - Drill chuck VDI 40 clamping range 2,5-16mm Price 150,-€

Condition: good (used), Year of construction: 1989, 1 x automatic lathe Traub TD 16 year of manufacture: 1989 with hydraulic single-bar feed LNS Hydrobar 3.16 -HS 4.4 Year of construction: 1989 Equipment: 6-fold star turret Material quick clamping. Long turning device Central lubrication Vogel Accessories: see photos The machine can be inspected under power. Bdjdpfx Aevga A Tobzei

Condition: good (used), Year of construction: 2001, functionality: fully functional, Traub CNC Lathe TNC65DGY, TX8H, 2001 Bjdpfxjwi Izho Abzsdi • 2x 10-station turrets with VDI30 rotating tool drive • C-axis on main/counter spindle • Y-axis on turret 1 • Hainbuch BZI65 on main/counter spindle Hollow clamping cylinder • Chip conveyor, coolant tank • Spare parts list, circuit diagram, ATC optics Very good condition. Can be viewed under power. The machine's geometry has been checked and corrected/adjusted.

Condition: not inspected (used), Traub TNL 12/7 Bdsdpsvk Tl Nsfx Abzoi

Condition: excellent (used), Traub TNL12 CNC Swiss 12mm Capacity Production hours: 25596 hr. Kraft & Bauer Fire Suppression System Paper filter: Kompatkt Band Filter Configured as pictured (more photos to follow) Put into production in 2009 (originally show model) 12-ft FMB Bar Feed Mist Collector Bdedpew R E Adsfx Abzei Chip Conveyor “2 machines available”

Condition: good (used), Year of construction: 2013, BAR CUTTING MACHINE TRAUB A 25 2013 Turning length: 65 mm Total power requirement: 2 kW Bjdewc Amxopfx Abzsdi Machine weight: approx. 0.7 t Space requirement: approx. 1200 x 700 x 1600 mm Thread length: 40 mm Max. part length: 65 mm Motor speeds: 1400-2800 Bar loader available!

Condition: not inspected (used), Year of construction: 1994, operating hours: 8,000 h, functionality: unexamined, Machine in good condition Bedpfx Absv Im Sdezjdi

Condition: used, Year of construction: 2011, operating hours: 51,400 h, functionality: fully functional, Traub CNC Lathe TNX65, TX8i-s, Year 2011 Model: TNX 65 Year of manufacture: 2011 Control: TX 8i-s Main/spindle and counter-spindle bar capacity up to 65 mm, 3 turrets, 3 x Y-axis, driven tools, 2 x C-axis, counter spindle, chip conveyor, band filter, coolant system, parts conveyor, new hydraulic pump Bjdpjwxc Hkjfx Abzjdi Extensive accessories; approx. 4 driven tool holders, 15 fixed holders Breuning short bar loader Approx. 114,586 power-on hours Approx. 51,400 production hours Good condition Connected to power, available for inspection Delivery time approx. 2 weeks, by arrangement