Used Treatment for sale (796)

Condition: new, power: 206 kW (280.08 HP), fuel type: diesel, axle configuration: 2 axles, color: white, gearing type: automatic, loading space length: 4,200 mm, loading space width: 2,350 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, compressor, electronic stability program (ESP), soot filter, Iveco Eurocargo ML140E28K Meiller Three-Way Tipper ZF 8-speed torque converter automatic transmission Wheelbase 3,105 mm Equipment: * ESP (Electronic Stability Program) * 120-litre fuel tank, plastic, lockable * 30-litre AdBlue tank * Tire Pressure Monitoring System (TPMS) with internal sensors * Manually selectable differential lock on drive axle(s) * Connectivity Box 4G including TCO service contract * Voltage converter 24/12 Volt (10.5 Ampere) * Hill Start Assist (Hill Holder) * Emergency Brake Assistant (AEBS) * Mechanical battery isolator switch on chassis, right side * Speed limiter 90 km/h * Adaptive Cruise Control (ACC) * RADIO with Bluetooth, DAB+ * Digital tachograph 4.1 (EC regulation) * Racor-type pre-fuel filter with heated water separator * Reversing warning buzzer, can be deactivated * Batteries: 180 Ah for Heavy / 170 Ah for Eurocargo * Preparation for toll system (OBU), including antenna and wiring on dashboard, receiver not included * Alternator 2,160 Watt (24 Volt x 90 Ampere) * Rearview mirrors for 2,500 mm body width * Compressed air connection in engine tunnel console * Electrically adjustable and heated exterior mirrors * Headlamp guards * Transparent sun visor, mounted externally on cab roof * Pollen filter for driver’s cab * Manually controlled air conditioning * Tectyl treatment - stone chip protection * Tow hitch, 40 mm, 120 kN, automatic * Tow hitch, make: Rockinger * Air compressor 360 ccm Body: Pre-installed lines for trailer hydraulics * Three-way tipper, type 9, 4,200 x 2,350 x 600 mm * Comfort package * Reinforced 5 mm bridge floor * Lashing rings and access ladder * Front wall 1,200 mm All information without guarantee. Errors and omissions excepted. Important: New and used commercial vehicles of the IVECO brand (2.9 t up to 44 t) and vans (up to 3.5 t) in stock. New, used, and annual vehicles of all variants and weight classes available at short notice. Dsdpfx Ajydtubofpscc We are happy to configure your new van/truck for you conveniently by phone and send you an offer tailored to your individual requirements, including all special equipment and custom solutions. Maintenance contracts, trade-ins, leasing, financing, hire purchase or classic cash purchase – you will always receive expert advice from us. Of course, we will also take your used vehicle in part exchange at fair prices!

Condition: excellent (used), Year of construction: 2004, Technical Specifications – ZS 130 T Gearwheel Shaving Machine Gear Specifications: * Gear diameter: 20 – 145 mm * Tooth width: 40 – 45 mm * Module range: 1.25 – 3.5 Working Area: * Swivel range of the shaving head: -23° to +90° * Taper adjustment (B-axis): +2° / -2° * Horizontal adjustment (X-axis travel): 160 mm * Swivel range of rotary table (E-axis): ±20° * Input resolution for all NC axes: 0.001 mm / degree Dsdpfjkwc Tfsx Afpjcc Slide Travel (Z-Axis): * Travel range (Z-axis): 300 mm * Input resolution: 0.001 mm Shaving Cutter Dimensions: * Outer diameter: 230 – 256 mm * Bore diameter: 63.5 – 100 mm * Shaving cutter width: 50.8 – 0.2 mm Workpiece Parameters: * Outer diameter: 20 – 145 mm * Module: 1.25 – 3.5 * Gear width: up to 40 mm Rotational Speeds: * Tool spindle speed (infinitely adjustable): up to 600 rpm * Workpiece speed (machining): up to 3000 rpm * Workpiece speed (spin): up to 4500 rpm Feed Rates: * A-axis: up to 3.3 rpm * B-axis: up to 0.5 rpm * C0-axis: up to 60 rpm * X-axis feed: 10 – 10,000 mm/min * Z-axis feed: 10 – 10,000 mm/min Machine Weight: * Approx. 5,600 kg --- Machine Description: The ZS 130 T is a high-performance gearwheel shaving machine designed for the precise finishing of cylindrical gears after hobbing or shaping. Shaving is a crucial process in gear manufacturing, used to correct profile and lead deviations and to improve surface finish, ensuring quiet operation and extended gear life. This machine is capable of processing gears with modules from 1.25 to 3.5 and diameters up to 145 mm. With its CNC-controlled axes and flexible swivel and taper adjustment capabilities, the ZS 130 T allows for a wide range of gear geometries and high production efficiency. The machine is ideal for manufacturers requiring high precision, consistency, and productivity in gear finishing processes. Typical Applications: * Finishing of gears for automotive transmissions and gearboxes * Shaving of helical and spur gears * Volume production in automotive and industrial gear manufacturing * Correction of tooth profile and lead errors before heat treatment The ZS 130 T combines robust construction, high-speed capability, and flexible adjustment options, making it a reliable solution for demanding gear shaving applications.

Condition: refurbished (used), BANDSAW HEADRING Mod. 1300/SG-CFC - Cast iron structure with stabilizing treatment. -right hand design (cutt from right to left!) - Flywheel diameter 1300 mm. - Flywheel width 165 mm for maximum blade width of 180 mm. -Filled flywheels with special ribs to enhance mechanical characteristics, subjected to stabilizing treatment; shaped with double curve for the best stability on the table; perpendicular to the rotation of axis. - 55kW (75 HP) main engine, automatic star-delta starter, pulley, belts and brakes -chains for timber unload HYDRAULIC CARRIAGE CFC - 4 clamps for log centering - Maximum distance from blade to clamp 1000 mm. -Max opening of hooks 900 mm - COMPUTERIZED-Mudata control system - Continuously variable speed feed from 0 - 140 ml/min and exploits the power of the main motor to obtain a Djdjxzth Ijpfx Afpjcc quality cut, hydrostatic design -4 turning logs chain systems - Control unit and seat, multi-function joystick and electric servo control !!!!! OPTIONAL !!!!! INSTALLATION..... 40,000 EUR EXCLUDING VAT, FOR A 1-YEAR WARRANTY Mechanization and unloading rollers Log ramp, length 4 m - 20,000 EUR + VAT Log loading arms on the log saw trolley, hydraulically operated with a single cylinder - 20,000 EUR + VAT Roller conveyor - EUR 20,000 + VAT - Length 7.60 m - Width 1.1 m - Rollers Ø 215 mm - Gear motor Second unloading roller conveyor - EUR 20,000 + VAT - Length 7.2 m - Width 1080 mm - Rollers 840 mm - Left/right chains - Own motorization These options significantly increase production flow, reduce downtime, and automate the log exit area. Advantages for industrial production - Complete line, fully reconditioned in 2025 - Excellent cutting stability thanks to cast iron construction - Extremely precise positioning with BRUSHLESS servo motors - High productivity and minimal maintenance - Ideal solution for factories wishing to modernize their cutting flow without investing in new equipment

Condition: excellent (used), Year of construction: 2001, Tetra Pak Spiraflow MT57 Year of Manufacture: 2001 Djdpfx Aoygwymsfpecc Excellent condition. For more detailed information about the MT75 model, see the attached PDF. General heating and cooling duties, heat recovery, pasteurisation, and UHT treatment. Hygienic design, suitable for processing food products. The Tetra Spiraflo MT heat exchangers are especially recommended for multi-purpose UHT plants processing free-flowing, viscous, and particulate products.

Condition: used, Year of construction: 1989, About Bickel - HK 3/50 The Bickel HK 3/50 is a high-performance, narrow-web flexographic printing machine designed for label and packaging applications. This machine is ideal for printing on a variety of substrates, including paper, film, and foil. Key features of the HK 3/50 include its compact design, high-speed printing capabilities, and advanced ink system. The benefits of this machine include its ability to produce high-quality prints at fast speeds, making it an ideal solution for label and packaging converters. Typical applications of the HK 3/50 include printing labels, stickers, and packaging materials for the food, beverage, and pharmaceutical industries. Key Technical Aspects: Dimensions and Specifications : The Bickel HK 3/50 has a compact footprint of 3.5 meters in length, 1.5 meters in width, and 2.2 meters in height. It weighs approximately 2,500 kilograms and has a maximum web width of 330 millimeters. The machine's maximum printing speed is 200 meters per minute. Djdpfx Afox Exatjpocc Paper Handling : The HK 3/50 features a 3-spindle unwind system with a maximum unwind diameter of 1,000 millimeters. The machine is equipped with a servo-driven rewind system with a maximum rewind diameter of 800 millimeters. The paper handling system also includes a web guide system and a Corona treatment unit. Printing Unit : The HK 3/50 features 3-6 printing units, each with a maximum printing width of 330 millimeters. The machine uses a flexographic printing process with a resolution of 508 dpi. The printing speed can reach up to 200 meters per minute. Ink System : The HK 3/50 uses a water-based ink system with a chambered doctor blade system. The ink system features a 3-liter ink tank and an automatic ink circulation system. The machine is also equipped with an anilox roll cleaning system. Plate Cylinder : The plate cylinder of the HK 3/50 has a diameter of 250 millimeters and a repeat length of 330-660 millimeters. The plate cylinder is designed for easy plate changing and features a pneumatic clamping system.

Condition: new, mileage: 21 km, power: 110 kW (149.56 HP), fuel type: diesel, empty load weight: 2,850 kg, maximum load weight: 650 kg, overall weight: 3,500 kg, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, loading space length: 2,720 mm, loading space width: 1,900 mm, loading space height: 500 mm, Equipment: ABS, air conditioning, central locking, crane, immobilizer system, soot filter, trailer coupling, FUSO Canter 3S15 with aluminum flatbed and loading crane, available immediately. The vehicle is for rent with an option to purchase. Dcodpjyf Uqyefx Afpjc Chassis: Fuso 3S15 Canter - GVW: 3,500 kg, payload (complete vehicle with crane and aluminum flatbed) approx. 600 kg - Manual transmission - Limited slip differential - 2 x 100 Ah batteries - 3,500 kg ball hitch trailer coupling with factory-installed wiring kit - Heated exterior mirrors - Automatic climate control - Radio pre-installation - Reversing warning system - PTO with increased rpm - Battery and AdBlue tank covers - Prepared for battery isolator relay - Continental traction tires 195/75/R16C - Seat covers Aluminum flatbed: - Interior: 2,720 mm x 1,820 mm x 400 mm (L x W x H) - 18 mm floor plate - Floor frame with airline tracks all around - Airline track also in the front bulkhead - Aluminum anodized side panels with fold-out step, easy to remove - Tool/storage box - Work lights - Other flatbed dimensions available upon request Loading crane: with 3 hydraulic extensions (country of manufacture: Italy) - Lifting capacity (manufacturer specs): Max. 995 kg. 3.2 m = 815 kg, 4.4 m = 575 kg, 5.6 m = 400 kg, 6.8 m = 300 kg, 8.05 m = 220 kg - Manufactured according to CE directive (EN 12999) - Slewing range 370° (slew limiter 190°) - All hydraulic cylinders double-acting - Hard-chromed piston rods - Pressure relief and load-holding valves - Emergency stop - Control block with 5 control valves - Separate hydraulic tank (33 l) with filter, mounted at crane base - Outriggers extendable on both sides, special support, support width 3.10 m - Hydraulic outriggers swiveling 30° and 180°, CE compliant, incl. M.O.L. - Load hook and fastening brackets - On-board power supply 12V - Electronic modules for Danfoss S800 control block (4 functions) - Danfoss S800 control block, 5 functions incl. high-pressure filter - Special outriggers, support width 3.10 m (1 pc) - Surcharge for shortened support legs by 80 mm - Mechanical boom extension N, 1.30 m stroke (7.0 k) - Stainless steel bolts and pipe clamps - Dinitrol treatment (cavity protection) - Zinc primer - Switch for work lights near the control block (factory-installed) - LED work light on knuckle boom (factory-installed) - LED for 2 support legs Optional: Rear view camera with Carplay, spade holder, 90° rope, ladder rack/transport frame for front or rear wall, additional tool/storage box available Errors and prior sale excepted... A/C, automatic climate control, VAT deductible, ABS, electronic immobilizer, central locking with remote control, tow bar, power steering, spare wheel, day cab, crane, new vehicle, emission standard: Euro 6, diesel, rear-wheel drive, excellent condition, hydraulics, fuel consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban), particulate filter, rental option, particulate class: 4 - Green.

Condition: new, mileage: 21 km, power: 110 kW (149.56 HP), fuel type: diesel, empty load weight: 2,850 kg, maximum load weight: 650 kg, overall weight: 3,500 kg, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, loading space length: 2,720 mm, loading space width: 1,900 mm, loading space height: 500 mm, Equipment: ABS, air conditioning, central locking, crane, immobilizer system, soot filter, trailer coupling, FUSO Canter 3S15 with aluminum flatbed and loading crane, available immediately. The vehicle is for rent with an option to purchase. Chassis: Fuso 3S15 Canter - GVW: 3,500 kg, payload (complete vehicle with crane and aluminum flatbed) approx. 600 kg - Manual transmission - Limited slip differential - 2 x 100 Ah batteries - 3,500 kg ball hitch trailer coupling with factory-installed wiring kit - Heated exterior mirrors - Automatic climate control - Radio pre-installation - Reversing warning system - PTO with increased rpm - Battery and AdBlue tank covers - Prepared for battery isolator relay - Continental traction tires 195/75/R16C - Seat covers Aluminum flatbed: - Interior: 2,720 mm x 1,820 mm x 400 mm (L x W x H) - 18 mm floor plate - Floor frame with airline tracks all around - Airline track also in the front bulkhead - Aluminum anodized side panels with fold-out step, easy to remove - Tool/storage box - Work lights - Other flatbed dimensions available upon request Loading crane: with 3 hydraulic extensions (country of manufacture: Italy) - Lifting capacity (manufacturer specs): Max. 995 kg. 3.2 m = 815 kg, 4.4 m = 575 kg, 5.6 m = 400 kg, 6.8 m = 300 kg, 8.05 m = 220 kg - Manufactured according to CE directive (EN 12999) - Slewing range 370° (slew limiter 190°) - All hydraulic cylinders double-acting - Hard-chromed piston rods - Pressure relief and load-holding valves - Emergency stop - Control block with 5 control valves - Separate hydraulic tank (33 l) with filter, mounted at crane base - Outriggers extendable on both sides, special support, support width 3.10 m - Hydraulic outriggers swiveling 30° and 180°, CE compliant, incl. M.O.L. - Load hook and fastening brackets - On-board power supply 12V Dedpewrivlsfx Afpocc - Electronic modules for Danfoss S800 control block (4 functions) - Danfoss S800 control block, 5 functions incl. high-pressure filter - Special outriggers, support width 3.10 m (1 pc) - Surcharge for shortened support legs by 80 mm - Mechanical boom extension N, 1.30 m stroke (7.0 k) - Stainless steel bolts and pipe clamps - Dinitrol treatment (cavity protection) - Zinc primer - Switch for work lights near the control block (factory-installed) - LED work light on knuckle boom (factory-installed) - LED for 2 support legs Optional: Rear view camera with Carplay, spade holder, 90° rope, ladder rack/transport frame for front or rear wall, additional tool/storage box available Errors and prior sale excepted... A/C, automatic climate control, VAT deductible, ABS, electronic immobilizer, central locking with remote control, tow bar, power steering, spare wheel, day cab, crane, new vehicle, emission standard: Euro 6, diesel, rear-wheel drive, excellent condition, hydraulics, fuel consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban), particulate filter, rental option, particulate class: 4 - Green.

Condition: used, Year of construction: 2011, total height: 3,900 mm, total length: 48,000 mm, total width: 12,000 mm, space requirement length: 48,000 mm, space requirement width: 18,000 mm, Equipment: cabin, SAMES automatic powder coating system The offer includes the following components: Dcsdswcfppopfx Afpec 1. Automatic transport system with a travel speed of 1 m/min and a DEMAG elevator 2. Surface preparation components: - Water treatment system - 3 water tanks - Surface preparation tunnel 3. Dryer with RX500 thermoreactors measuring 5.0 m long and 2.4 m high, along with a control unit 4. Painting unit components: - Spray booth - 2 RFV 2000 manipulators - Powder coating mixing center - Control cabinet - 6 powder applicators - PVV recycling kit - Filter unit - Filter press - Tanks for the powder coating mixing center - Fire extinguishing unit - Paint shop control system 5. RX500 thermoreactor oven measuring 9.0 m long and 2.4 m high, along with a control unit

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Dual Chamber During Oven 1.700 x 1.400mm (2.40m2) Process area based on largest substrate; 4.1. Process area (minimal); 1.700 x 1.400mm (2.40m2) 4.2. Substrates are (non-) heat treated, (non-) TCO coated optical white (or standard) float glass sheets with straight or pencil edges and (non-) edge delete patterns (1) 4.3. Substrates are rectangular shaped (2) General Electrical diagram (see appendix 1) Main power supply voltage 3x400 ± 5% + earth, 50Hz ± 5% Control voltage 230Vac 50Hz and 24Vdc Main fuse 140A Motor power Circulation fan motor 2.2 kW (2 pcs.) Drive motor vertical transport 0.39 kW Drive motor horizontal transport 0.09kW 1.5.3 Heating system Heating Heating type Electric with closed tube elements Power 30 kW per room Overall, the system consists of two parts, viz: Dodpjv T I Iqefx Afpjcc - The furnace consists of two chambers each with an air circulation fan and adjustable air inlet. - The conveying system consists of a trolley with vertical and horizontal movement. The oven is suitable for curing heat treatments under air atmosphere with cleanroom classification in the temperature range from 50ºC to 250ºC. One heat cycle per chamber can be programmed. The cart can place glass from the conveyer position into one of the two chambers where the products undergo a selected heat cycle. And then removed from the oven and placed back in the conveyer position.

Condition: good (used), Year of construction: 2010, Ref. -No.: 10287 Manufacturer: DMG Type: DMC 210 FD Year of construction: 2010 Type of control: CNC Control: Heidenhain Mill Plus Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2100 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Machine length: 11.000 mm Machine width: 5.000 mm Machine Height: 3.500 mm Max. Workpiece diameter: 2500 mm Max. Workpiece Weight: 6.000 kg Max. rotary table diameter: 1.850 O Dedpfx Afexxn Ukjpocc Table speed range: 250 min/-1 Tool Taper: HSK-A100 Tool Piece Magazine With: 183 Pcs./pcs. Spindle Speed: 12.000 RPM Max. Torque On The Boring Spindle: 288 Nm Max. Torque: 2.000 Nm Feed Speeds X/Y/Z Axis: 30.000 mm / min Max. Workpiece height: 1.460 mm axes: 5 Further information: Turning and milling center incl. pallet changing system Gear spindle Coolant treatment system, with belt filter, 710 x 50mm 1 Knoll 600S2 chip conveyor 2 Losma oil mist extraction units 1 steel platform (storage space for clamping device): 5,300 x 2,900 mm - Axes renewed 11.2024 - New encoder, electrical components renewed - Geometry protocols available Machine is still in production and under power. The machine can be viewed at any time by appointment.

Condition: used, mileage: 1,64,105 km, power: 100 kW (135.96 HP), first registration: 01/2022, fuel type: diesel, overall weight: 3,050 kg, next inspection (TÜV): 01/2026, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, Year of construction: 2022, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Vehicle number (for enquiries): 46 Mercedes-Benz VITO 114 LONG 9G-TRONIC 4X4 Paint Code: Paint Colour Arctic White MB 9147 Interior Trim: * VF4 Caluma Fabric, black Equipment: * 219L Hamburg * 9147 Paint Colour Arctic White MB 9147 * A1O Rear axle make IFA * BB7 CO2-optimised brake system * BH1 Hold function * C447 - * C70 Pedestrian protection * CF0 Basic suspension * CL1 Steering wheel adjustable in tilt and height * CL4 Multifunction steering wheel with trip computer * D51 Full partition with window * E07 Hill start assist * E1D Digital radio (DAB) * E2R Radio generation 2 * E34 Buffer battery for start process * EA4 Audio 40 * ED4 AGM battery 12 V 92 Ah * EL8 Two-way loudspeakers front * EW6 Pre-installation for Remote Services Plus * EY2 Pre-installation for Live Traffic Information * EY5 Mercedes-Benz emergency call system * EY6 Breakdown management * EZ5 Park Package * EZ8 PARKTRONIC * F447 - * F61 Interior mirror * F68 Exterior mirrors heated and electrically adjustable * FF1 Centre console with stowage compartment * FKA Panel van * FR1 Non-retractable reverse camera * FR8 Reverse camera * FY7 Multi-button remote control * FZ9 Two additional main keys * G43 9G-Tronic * H16 Seat heating for driver * H20 All-round heat-insulating glass * HH9 Semi-automatic air conditioning Tempmatic * HI1 Climate zone 1 (cold/comfort) * I52 HU Map Data Country Set 3 * IB6 Model series C447 Vito/V-Class * IG5 Basic * IK0 Complete vehicle * IL1 Domestic (Germany) * IL4 Region EU/EFTA * IL5 Left-hand drive * IN2 Wheelbase 3200 mm, long overhang * J55 Seat belt reminder for passenger seat * JF1 Rain sensor * JH3 Communication module (LTE) for digital services * JK3 Instrument cluster with pixel-matrix display * JW8 Attention Assist * JX2 Maintenance interval 40,000 km * KB5 Main fuel tank 70 litres * KP7 SCR exhaust treatment generation 4 * L Left-hand drive * L16 Halogen fog lamps * LA2 Light assistant * LC2 LED light strip in cargo area * LC4 Comfort roof control unit * LE1 Adaptive brake light * LX5 Europe * M40 Alternator 14V/200A * MG9 Alternator management * MJ8 ECO start/stop function * MK8 Speed limiter 210 km/h * MS1 Cruise control * MT6 Emission class Euro 6D N1 * MU2 Engine OM654 DE 20 LA 100 kW (136 HP) * MX0 BlueEFFICIENCY package * R21 Wheel size group 1 * RF1 Tyre make Continental (10) * RG7 Tyres 225/55 R17 * RM1 M + S tyres * RS7 Steel wheels 6.5 J x 17 * S00 Airbag control unit generation AB12 * SB1 Comfort driver's seat * SB2 Comfort passenger seat * SE5 Lumbar support for driver's seat * SW3 Passenger airbag removed * V43 Wooden floor * VA2 Interior trim cargo area up to roof height (wood) Dcedjxlw E Sepfx Afpsc * VF4 Caluma fabric, black * VV9 Roof frame fixing points * W65 Tailgate * W70 Privacy glazing in rear, black glass * W78 Window in tailgate/rear door with wash/wipe system * WM0 Control code model update * X30 Registration certificate part 2 * X99 Manufacturer Mercedes-Benz AG * XC9 COC papers * XG6 GVW variant 2,800 kg * XM0 Model update * XM8 Control code development * XN1 Model year change G1-II * XO9 Mercedes-Benz Mobilovan with DSB and GGD * XU1 Signs / print in German * XW9 Control code

Condition: used, mileage: 2,80,000 km, power: 62 kW (84.30 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,000 kg, first registration: 11/2013, emission class: euro5, color: white, number of seats: 9, Year of construction: 2013, total length: 5,391 mm, total width: 1,904 mm, total height: 1,990 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, For sale is a well-maintained Volkswagen T5 Kombi Long Wheelbase featuring the globally popular 2.0-liter diesel engine. * The vehicle is in good condition! * German specification vehicle * Regularly serviced * Euro 5 emissions standard * 1st owner Dcjdpfx Afeygcbcspsc * Full service history Equipment: Long Wheelbase * L2-H1 * 9 seats (2 individual seats, 2-seater bench, 2-seater bench, 3-seater bench) * Air conditioning * Passenger airbag * M1 approval (passenger car homologation) * Electric exterior mirrors * Power windows * Central locking system * and much more… Technical Data: Gross vehicle weight: 3,000 kg * Kerb weight: 1,976 kg * Trailer load: 2,200 kg Why are we the right choice? Attractive financing options through our partner bank. * Nationwide delivery of your desired vehicle * Trade-in of your current vehicle at fair conditions * Transfer plates (5-day/ customs registration) usually available the same day * Pick-up service from airport or train station All vehicles are professionally prepared and hygienically clean! Highlights: Disinfection of interior and ventilation system using ozone treatment. 2-stage exterior polish * Paint correction and smart repair if required All our vehicles have also undergone thorough servicing. Naturally, this includes new fluids, filters and other necessary work, so you do not have to worry about any of it. Optionally, we can present the vehicle at an independent inspection center or workshop of your choice. We are pleased to have sparked your interest and are at your disposal around the clock. If you have any questions, comments or specific requests, please do not hesitate to contact us! For more information and an insight into our business philosophy, visit Special Features: Audio system RCD 210 (radio/CD player with MP3 playback), Electric Package 1, Sliding window in the cargo/passenger compartment: 1st row left, Rear wing doors with windows, Interior release for tailgate / rear doors, Spare wheel with full-size tire, Seat package: 9-seater, 2-2-2-3 (2 individual seats, 2-seater bench, 2-seater bench, 3-seater bench), Seats in cargo/passenger compartment: 1st row, 2-seater bench, Seats in cargo/passenger compartment: 2nd row, 2-seater bench, Seats in cargo/passenger compartment: 3rd row, 3-seater bench, Passenger compartment prep II, Additional winter tires (customer information required), Permitted gross vehicle weight 3.00 t Further features: Driver's and passenger's airbag, Aspherical exterior mirror, left, Convex exterior mirror, right, Rubber flooring in cab, Brake assist system (HBA), Fixed window in cargo/passenger compartment: rear left, Fixed window in cargo/passenger compartment: rear right, Fixed window in cargo/passenger compartment: front right, Heated rear window, Pollen filter, Body/structure: Standard Kombi, Body variant: Standard roof, Child safety locks on sliding doors, Headlight leveling, 2.0 L - 62 kW TDI engine, Non-smoker package, 3,400 mm wheelbase, Low emissions according to Euro 5, H4 headlights, Sliding door passenger/cargo area right, Upholstery: fabric, Steel wheels 6.5x16, Half-height hardboard lining in cargo/passenger area, Heat-insulating glazing.

Condition: used, mileage: 3,000 km, power: 125 kW (169.95 HP), color: orange, gearing type: mechanical, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, power assisted steering, - To ensure you receive the best possible advice from us, we kindly ask you to schedule an appointment. Mr. Kiel is happy to assist you. Tel: Dodpfx Afeyfq Dcopscc A50 Front axle with increased load capacity, AR2 Axle ratio i = 3.923, BH1 HOLD function, C6L multifunction steering wheel, CB1 chassis for comfort and cargo protection, CB7 Stabilization Level I, CL1 steering wheel adjustable in tilt and height, CN2 radiator grille frame in vehicle color, CT1 vibration damper, E07 hill start assist, E1D DIGITAL RADIO (DAB), E1U USB socket 5V, E3M MBUX multimedia system with 7-inch touchscreen, navigation possible via AppleCarPlay/AndroidAuto, E57 trailer socket wiring, ED4 AGM battery 12V 92Ah, EE5 Ultracap, automatic transmission lock, ES0 jump start contact, EW6 pre-installation Remote Services Plus, EY5 Mercedes-Benz emergency call system, EY6 breakdown management, F35 rear wall window, F61 interior mirror, F68 heated and electrically adjustable exterior mirrors, F907 SERIES 907 VAN VS30, FF0 coat hooks in the passenger compartment, FF5 shelf above windscreen, FHL DOUBLE CAB, FJ4 storage compartment under dashboard, FM3 WET WIPER SYSTEM, GD8 6-speed manual transmission ECO Gear, H12 auxiliary hot water heater, H1B tachograph operation front under roof liner, H21 heat-insulating glass with band filter on windscreen, HH9 SEMI-AUTOMATICALLY CONTROLLED AIR CONDITIONING TEMPMATIC, IF4 chassis with double cab, IR6 wheelbase 4,325 mm, rear overhang 1,615 mm, IT4 3.5-tonne GVW, J10 speedometer km/h, J1A seat belt warning system for rear seats, J4V pre-installation intelligent EU tachograph, J55 seat belt warning system for passenger seat, J58 seat belt warning system for driver’s seat, J65 outside temperature display, JA8 crosswind assist, JF1 rain sensor, JH3 communication module (LTE) for digital services, JI7 service interval start mileage 60,000 km, K13 main tank 71 liters, KP7 SCR exhaust treatment generation 4, L LEFT-HAND DRIVE, L94 omission of parking light, LA2 headlight assist, LB1 side marker lights, LE1 adaptive brake light, LX5 Europe, M60 alternator 14V / 250A, M72 vehicle HVO compatible, MJ8 ECO start-stop function, MS1 CRUISE CONTROL, MT6 Emission class Euro 6d N1, MU5 OM 654 DE 20 LA 125 kW (170 hp) 3,800 rpm, P02 flatbed with aluminum drop sides, PZ7 storage boxes right and left under flatbed, PZ9 ladder carrier behind cab, Q11 longitudinal frame reinforcement, Q18 bolted rear cross member, QA3 vehicle pre-installation for trailer load up to 3,500 kg, RF9 tire make Goodyear (90), RH2 tires 235/65 R16 C, RM0 all-season tires, RS3 steel wheels 6.5J x 16, RX5 wheels by Maxion Wheels, S22 driver's seat armrest, S23 two-passenger front bench seat, SA5 driver airbag, SB1 comfort driver’s seat, SE5 lumbar support driver’s seat, SK2 driver seat occupancy detection, VF7 fabric Maturin black We will gladly provide you with an offer for the trade-in of your used vehicle. If you wish to lease or finance your vehicle, we will be happy to provide you with an individual offer. Subject to errors and prior sale. Mr. Kiel is happy to assist you. • ESP • Navigation system • Service book maintained • Auxiliary heating • New technical inspection (HU) Cab: Double cab Cabin: double Engine displacement: 1,950 cc Gross vehicle weight: 3,500 kg Load compartment dimensions (LxWxH): 3400x2050x400 For further information, please contact Tobias Ebert.

Condition: used, power: 152 kW (206.66 HP), color: white, driver cabin: day cab, gearing type: automatic, Year of construction: 2026, Equipment: ABS, air conditioning, power assisted steering, For vehicle inquiries, Mr. Seidel will assist you (phone ...). Iveco Eurocargo ML80E21K 4x2 Hooklift Superstructure: Hyva 05-32-K-DIN-BF, 2x trailer coupling, differential lock on drive axle, switchable, mechanical battery master switch on chassis, right side, batteries 143 Ah, recommended for tail lift and PTO operation, reverse warning buzzer, switchable, preparation for toll system (OBU), includes antenna and wiring on dashboard, without receiver unit, safety valve for parking brake, alternator 2160 Watt (24 Volt x 90 Ampere), recommended for tail lift operation, voltage converter 24/12 Volt (10.5 Ampere), electrical preparation for cargo area lighting, Adaptive Cruise Control (ACC), hill-start assist (Hill Holder) for comfortable starts on inclines, Iveco Radio DAB+, Bluetooth, integrated microphone, mini-USB / AUX-In, LCD display, roof hatch, mechanical execution, sunblind for side window on driver’s side, cab rear wall with window (recommended for open bodies for monitoring rear traffic), comfort double passenger bench for 2 persons, armrest for center seat, work surface and cup holder when center seat is folded, adjustable right armrest on driver's seat, one-piece steel bumper (Heavy-duty: 3-piece), electronic immobilizer and third vehicle key, electrically adjustable and heated exterior mirrors, HI-Comfort driver’s seat, multi-adjustable, air-suspended, integrated headrest and height-adjustable seat belt, lumbar support, with 3-stage cooling or heating, headlamp guards, amber beacon on roof (left and right), dirt-resistant interior fittings (easy to clean), transparent sun visor mounted outside on cab roof, cab pollen filter, manual air conditioning, prepared for mobile device holder (with reinforced base plate on dashboard, holder not included), rear underride guard, tubular design. Dcjdpfx Afeyfqr Tepoc Recommended for tipper applications, tipper version execution, torsion-resistant connections for subframe integration, 13-pin trailer socket for 12V operation, 15-pin trailer socket for 24V operation, weight rating front axle: 3,600 kg / rear axle: 5,800 kg, Tectyl treatment stone chip protection, ball-head coupling, Orlandi brand, max. trailer weight 3,500 kg braked, 40 mm automatic trailer coupling, 120 kN, Rockinger trailer coupling, trailer version for trailers with continuous brake system, aluminum air tanks (number depends on suspension and trailer configuration), shunting and towing jaw coupling at front, radiator guard under front bumper for heavy off-road use, gross vehicle weight 7,490 kg (front axle: 3,600 kg / rear axle: 5,800 kg), rear cross member, D value: 120 kN Suitable for drawbar trailers, type plate 80E, PTO NH/4C with pump connection. Suitable for Meiller tipper or crane tipper, PTO preparation includes dashboard switch and wiring along chassis frame. On request, we will be pleased to provide you with a leasing or financing offer. Mr. Seidel (phone ...) will be happy to assist you. Further information can be found on our homepage.

Condition: used, mileage: 3,000 km, power: 110 kW (149.56 HP), color: white, gearing type: mechanical, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, power assisted steering, Surcharge for partition wall installation: +990.00 EUR net To ensure you receive the best possible advice from us, we kindly ask you to arrange an appointment. Mr. Kiel is happy to assist you, Tel: Dsdpoyfqplsfx Afpscc Equipment: AR5 Axle ratio i = 4.727, BA3 Active Brake Assist, CB8 Stabilization Level II, CL1 Steering wheel adjustable in tilt and height, C6L Multifunction steering wheel, DK1 Special vehicle VSF, D03 High roof, D93 Omission of partition wall, ED4 Fleece battery 12 V 92 Ah, ED5 Programmable special module, ES0 Jump-start contact, EW6 Pre-installation of Remote Services Plus, EY5 Mercedes-Benz emergency call system, EY6 Breakdown management, E1D Digital radio (DAB), E2I Additional battery for retrofitted consumers, interior, E3M MBUX multimedia system with 7-inch touchscreen, E36 Additional battery separation relay, FF5 Overhead storage above front windshield, FF8 1-DIN slot front under headliner, FJ1 Hinged lid for storage compartment, F61 Interior mirror, F68 Heated and electrically adjustable exterior mirrors, GD8 6-speed manual transmission ECO Gear, HH2 Additional electric air heater, HH9 Semi-automatic climate control TEMPMATIC, HZ9 Auxiliary heater, H11 Additional air heater, H21 Heat-insulating glass with band filter at the windshield, H22 Heated rear window, IG4 Standard, IG5 Basic, JA8 Crosswind assist, JB7 Park package with reversing camera, JD6 Smart tachograph EU, JH3 Communication module (LTE) for digital services, JW5 Lane keeping assist, J10 Speedometer km/h, J55 Seat belt warning device for passenger seat, J58 Seat belt warning device for driver seat, J65 Outside temperature display, KP7 Emission treatment SCR Generation 4, K13 Main tank 71 liters, LA2 Headlight assistant, LB1 Side marker lights, LB5 3rd brake light, LB7 b front left / rear right, LE1 Adaptive brake light, L16 Halogen fog lamps, L21 Reverse light low, L94 Omission of parking light, MD4 Speed limit 90 km/h EU, MJ8 ECO start-stop function, MP6 Engine version Euro VI, MR0 Emission level E (for heavy commercial vehicles), MT4 Electronic variable speed governor, MU3 OM 654 DE 20 LA 110 kW (150 HP) 3800 rpm, M40 Alternator 14 V/200 A, M72 Vehicle HVO capable, P48 Rear mud flaps, Q11 Longitudinal member reinforcement, RD9 Tires without brand specification, RH1 Tires 195/75 R16 C, RM1 M+S tires, RS6 Steel wheels 5.5 J x 16, RX1 Wheels without brand designation, SA5 Driver airbag, SA6 Passenger airbag, S02 Driver seat, S04 Adjustable passenger seat, S22 Armrest for driver seat, S25 Armrest for passenger seat, T12 Intermediate locking sliding doors to cargo area, T16 Sliding door right, T86 Entrance grab handle at rear right pillar, VA7 Storage compartment with netting in rear doors, V36 Roof lining, V43 Wooden floor, V85 Smoking package, W18 Sliding window front left in side panel/sliding door, W19 Sliding window front right in side panel/sliding door, W54 Rear doors, double-leaf, opening to side panel, W78 Window in tailgate with wiper and washer system We are happy to make you an offer for your used vehicle’s trade-in. Should you wish to lease or finance your vehicle, we will gladly provide you with a tailored offer. Subject to errors and prior sale. Mr. Kiel is happy to assist you, - ESP, navigation system, auxiliary heater, new general inspection Engine displacement: 1,950 cc GVW: 5,000 kg Please contact Tobias Ebert for further...

Condition: new, Year of construction: 2025, pressing force: 40 t, table width: 700 mm, table length: 700 mm, clearance between the columns: 700 mm, retraction force: 15 t, stroke length: 400 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH 40/15 TON FOUR-COLUMN HYDRAULIC DRAWING PRESS General Description The CRONOSSTECH 40/15 ton four-column hydraulic drawing press is a compact and robust press solution designed for precision metal forming, deep drawing, and metal spinning applications. Thanks to its four-column frame construction, parallelism and perpendicularity tolerances remain stable throughout the pressing cycle. The press frame, manufactured from St52 grade steel, undergoes stress relief via vibration treatment. The ram and punch systems can be controlled independently, with stroke and pressure adjustments performed precisely through the touchscreen panel. Equipped with REXROTH or PARKER hydraulic components, IE3 class motor, and automatic lubrication system, this machine ensures long-lasting, safe, and efficient operation. The user-friendly PLC-controlled design minimizes operator errors. This model is an ideal solution for small to medium-scale spinning, deep drawing, die trial, and precision pressing applications. Key Advantages - Rigid four-column press frame design - Independent stroke and tonnage control for ram and pot - Adjustable system via touchscreen panel - High accuracy and repeatability - Low maintenance requirements and long service life Areas of Application - Metal spinning applications - Deep drawing processes - Die testing and prototyping Dsdpfx Afox N Uk Njpecc - Metalworking and auxiliary production lines ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four-column FRAME MATERIAL: St52 – ERDEMIR COLUMN SHAFT DIAMETER: Ø 90 – 4 pcs. Induction-hardened and chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 40 Tons CAPACITY (POT): 15 Tons DISTANCE BETWEEN COLUMNS: 700 × 700 mm PARALLELISM TOLERANCE: 120 micron/m PERPENDICULARITY TOLERANCE: 60 micron/m STROKE (RAM): 400 mm STROKE (POT): 100 mm MIN. DAYLIGHT: 100 mm MAX. DAYLIGHT: 500 mm WELDING STRESS RELIEF: Vibration stress relief WELDING PROCEDURE: WPQR and WPS certified by TÜRK-AK, EN ISO 15614-1:2017 (EN ISO 14731) MAX. WORKING PRESSURE: 250 Bar TOTAL MOTOR POWER: 5.5 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVING TABLE FAST DESCENT SPEED: 150 mm/sec MOVING TABLE DRAWING SPEED: 12 mm/sec MOVING TABLE RETURN SPEED: 170 mm/sec POT TABLE FORWARD SPEED: 30 mm/sec MAIN CYLINDER BORE DIAMETER: Ø 145 mm – Ck45 POT CYLINDER BORE DIAMETER: Ø 90 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 units APPROXIMATE PRESS HEIGHT: 3100 mm APPROXIMATE PRESS WIDTH: 1050 mm APPROXIMATE PRESS DEPTH: 1050 mm DISTANCE FROM BASE TO LOWER TABLE: 1000 mm PRE-FILL VALVE: NG 100 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION TYPE: Automatic (adjustable from the panel) RAM / POT STROKE AND TONNAGE ADJUSTMENT: Adjustable from the panel SYSTEM & PRESS STATUS INFORMATION: Viewable from the panel DIE MEMORY: Adjustable from the panel LINEAR MEASURING SCALE: NOVATECHNIK or TURCK PLC APPLICATION: DELTA TOUCHSCREEN PANEL: DELTA 7” SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 4.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, functionality: fully functional, BINKS MX 30/70 – Air-operated airless / air-assisted industrial pump The BINKS MX 30/70 is an advanced air-operated industrial pump from Binks' MX series, developed for demanding surface treatment applications. The pump utilizes patented magnetic valve technology, which ensures rapid switching and very low pulsation for uniform material flow and high-quality finish. The ceramic-coated piston rod offers exceptional wear resistance and up to 3× longer service life when handling abrasive materials. Features: Pressure ratio: 30/70 Very low pulsation Air-operated, robust construction Long service life and minimal downtime Typical applications: Djdpoyfucijfx Afpecc Corrosion protection, steel structures, pipes and tanks, maritime, vehicle and chassis manufacturing. Suitable for both solvent- and water-based coatings, epoxies, polyurethanes, and zinc-rich primers.

Condition: used, Year of construction: 2013, functionality: fully functional, Cutting range for steel: 1–38 mm Cutting range - x: 3000 mm Cutting range - y: 1500 mm Cutting medium: HiFocus 161i CNC control: MicroStep Total power requirement: 6 kA Approx. machine weight: 3,500 kg Description: MicroStep CNC guiding machine MasterCut Eco A Plus 3001.15 (3000 x 1500 mm) MicroStep® CNC control unit iMSNC with integrated network card - LCD operator panel mounted on the gantry - Laser pointer with automatic offset transfer - iMSNC control parameter database / Windows® - "AsperWin-Basic" programming system for direct programming at the machine control - "AsperWin Select" macro library module - "AsperWin NC-Sim" NC simulator module - "Plasma Marking" module (for center-punching) via plasma source - "THC" module / automatic height control via arc voltage - CNC oxy-fuel cutting table with sectional extraction / 3000 x 1500 mm - USB 2.0 interface for external storage devices Dcjdpfx Ajx Sqy Ssfpec - MicroStep® "iFDS Win" remote diagnostics module, remote maintenance access via TeamViewer - HiFocus 161i plasma source from KJELLBERG with automatic gas console and ContourCut Speed technology - Plasma torch connection (PBA) for HiFocus 161i, automatic gas console for HiFocus 161i / FlowControl - Module for controlling the automatic gas console HiFocus 161i - Marking module for HiFocus 161i - CNC interface for HiFocus 161i / integration with CNC control - Module for automatic current control for HiFocus 161i - Kemper extraction unit type 810800080 - Remote control of a Kemper filter system, incl. software activation Oxy-fuel: - 1 x oxy-fuel support Eco - Central gas control via proportional valves and parameter database for 1 torch - Power supply cables and gas hoses for heating oxygen, cutting oxygen, and acetylene - RHÖNA-FIT+ acetylene machine cutting torch (optionally also propane) - 1 tool set for oxy-fuel - 1 capacitive height control IHT (intelligent height control) for oxy-fuel technology - 1 electric ignition unit for RHÖNA acetylene - 1 x active collision protection - Standalone MMI control console - 1 x quick-change head for the PerCut 211 plasma torch - Initial set of consumables for Kjellberg® plasma source HiFocus 161i KAESER compressed air screw compressor Aircenter 8 and accessories for the central air supply of the complete MicroStep CNC plasma cutting system: - Aircenter 8 - ECO DRAIN - Condensate treatment system type: Aquamat CF 3

Condition: ready for operation (used), operating hours: 6,512 h, functionality: fully functional, mileage: 44,264 km, power: 55 kW (74.78 HP), first registration: 04/2016, overall weight: 3,500 kg, fuel type: diesel, color: traffic orange, axle configuration: 4x4, maximum load weight: 1,500 kg, empty load weight: 2,000 kg, next inspection (TÜV): 05/2026, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, Equipment: additional headlights, air conditioning, all wheel drive, hydraulics, soot filter, Hako Sweeper Citymaster 1600 from 1st Owner Former municipal / authority vehicle 3-Broom Sweeping System Portal arm with weed control function Registered as a self-propelled work machine (40 km/h) Major engine inspection including timing belt, water pump, oil, and filters will be performed upon sale 6,512 total operating hours 3,767 sweeping operating hours 44,264 kilometers 4x4 all-wheel drive – hydrostatic all-wheel drive system Waste container made of stainless steel Wheelbase: 1,600 mm Track width: 1,055 mm Fresh water tank: 180 liters Unladen weight approx. 1,900 kg Permitted total weight: 3,500 kg Length: 4,510 mm / Width: 1,210 mm / Height: 1,970 mm Travel speed: 0–40 km/h Working speed: 0–24 km/h Noise insulation package Engine: Water-cooled 4-cylinder VW industrial diesel engine Fuel tank approx. 60 liters Hydrostatic all-wheel drive 2-circuit high-pressure hydraulics - Circuit 1 (front): 0–50/0–70 l/min at 225 bar - Circuit 2 (rear): 0–20/25/30 l/min at 195 bar Hydraulic service brake operated via foot pedal Cab with air-suspended driver’s seat Air conditioning / heating Water treatment system Hydrant connection Dosing system Permitted total weight: 3,500 kg Unladen weight: 1,950 kg Other applications possible with additional HAKO attachments such as sweeper brushes, snow plough, and lawn mower (not included in delivery) Subject to errors, changes, and prior sale Dsdpfx Ajyf Hihefpjcc We sell exclusively under our General Terms and Conditions and exclude any form of warranty. Errors, changes, and prior sale reserved. We are available Monday to Friday from 9:00 am to 5:00 pm. Saturdays by appointment; outside these hours, appointments can be arranged by phone. We are happy to accept your current used machine/vehicle in part exchange. Sales to commercial customers and exporters are preferred; this applies to our entire vehicle inventory. The details provided above are non-binding; errors, changes, and prior sale subject to reservation.

Condition: ready for operation (used), functionality: fully functional, The Stériflow 1322 Barriquand autoclave is designed for industrial facilities requiring controlled thermal sterilization of packaged products. It enables precise processing cycles thanks to heating by superheated water or steam, ensuring uniform temperature increase. This results in consistent thermal treatment in compliance with food safety standards. Additionally, this method minimizes temperature discrepancies within the load. This autoclave is integrated into food processing lines for canned goods, ready meals, or packaged products. Its usable volume of 3,700 liters allows for processing large loads while maintaining precise process control. Furthermore, Barriquand’s industrial construction ensures robustness suitable for repeated operation, making the equipment well-suited to demanding production environments. The pressure vessel design allows operation up to 6 bar, ensuring thermal cycle stability. Sterilization parameters remain controlled throughout the process. The metal structure, engineered for pressurized circuits, adds to the installation’s reliability. As a result, the autoclave safeguards the sanitary quality of finished products. Offered used by Europ’Equipement, the Stériflow 1322 autoclave is identified by its manufacturer’s plate and inspected before recommissioning. This ensures that the operator receives reliable, traceable equipment. Moreover, purchasing a refurbished autoclave reduces investment costs while providing a solution suitable for industrial requirements. Consequently, this model represents a cost-effective solution for optimizing production expenses without compromising process safety. Technical specifications: Year of manufacture: 1990 Serial number: S677 Dedjygl Huspfx Afpscc Heating medium: superheated water / steam Usable volume: 3,700 L Maximum operating pressure: 6 bar Circuit: B Empty weight: 2,400 kg

Condition: ready for operation (used), functionality: fully functional, mileage: 63,760 km, power: 55 kW (74.78 HP), first registration: 10/2019, overall weight: 3,500 kg, fuel type: diesel, color: silver, axle configuration: 4x4, maximum load weight: 1,500 kg, empty load weight: 2,000 kg, next inspection (TÜV): 02/2028, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, operating hours: 6,288 h, Equipment: additional headlights, air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1600 Suction Sweeper + Winter Service Package, Single Previous Owner Comprehensive engine service including timing belt, water pump, oil, oil filter, and fuel filter will be performed free of charge upon sale. – Model equipped with new drive pedal system – 2,998 sweeping hours – 6,288 total operating hours – 63,760 kilometers – 4×4 all-wheel drive – hydrostatic all-wheel drive system Includes: • Kif snow blade type CM 1600, 1,500 mm wide (as new/never used in snow) or alternatively with Kif front broom type CM 1600, 1,300 mm wide, year 2019 (as new/never used in snow), not shown in the pictures • Gmeiner salt spreader type Husky 500V FS with stand supports (as new/used twice for testing) • Camera system with 270° panoramic view • Debris hopper made of stainless steel Technical Data: – Wheelbase: 1,600 mm – Track width: 1,055 mm – Fresh water tank: 180 liters – Unladen weight: approx. 1,900 kg – Permissible total weight: 3,500 kg – Dimensions: Length 4,510 mm / Width 1,210 mm / Height 1,970 mm – Driving speed: 0–40 km/h – Working speed: 0–24 km/h – Noise insulation package – Selectable working speeds: 1,600 - 2,400 rpm (ECO/Standard/MAX) – Engine: water-cooled 4-cylinder VW industrial diesel engine – Low-emission Euro 5 – Fuel tank capacity: approx. 60 L – Hydrostatic all-wheel drive system – Dual-circuit high-pressure hydraulic system: Circuit 1 (front) 0–50/0–70 l/min at 225 bar, Circuit 2 (rear) 0–20/25/30 l/min at 195 bar – Hydraulic service brake via foot pedal Dedpfx Aeyf E Upofpecc – Cab with air-suspended driver seat – Air conditioning/heating – Water treatment system – Hydrant connector – Dosing system – Permissible total weight: 3,500 kg – Unladen weight: 1,950 kg Further applications possible through additional HAKO attachments such as brooms, snow plows, and lawn mowers (not included in scope of supply). Subject to errors, changes, and prior sale. We only sell in accordance with our terms and conditions and with exclusion of any warranty. Errors, changes, and prior sale reserved. We are available Monday to Friday from 9:00 a.m. to 5:00 p.m. without interruption, and on Saturdays by appointment. Outside these hours, appointments by phone are possible. We are happy to trade in your current used equipment or vehicle. Sales to businesses and exporters are given priority, which applies to our entire vehicle inventory. The above details are non-binding; errors, changes, and prior sale reserved!

Condition: ready for operation (used), operating hours: 6,288 h, functionality: fully functional, mileage: 63,760 km, power: 55 kW (74.78 HP), first registration: 10/2019, overall weight: 3,500 kg, fuel type: diesel, color: silver, axle configuration: 4x4, maximum load weight: 1,500 kg, empty load weight: 1,900 kg, next inspection (TÜV): 02/2028, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, Equipment: additional headlights, air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1600 Sweeper + Winter Service Equipment from First Owner • Comprehensive engine inspection with timing belt, water pump, oil, oil filter, fuel filter will be carried out free of charge upon sale • Machine version with new drive pedal system • 2,998 sweeping hours • 6,288 total operating hours • 63,760 kilometers • 4×4 all-wheel drive – hydrostatic all-wheel drive • Including Kif snow plough type CM 1600, 1,500 mm wide (as new/has never seen snow) or optionally with Kif front broom type CM 1600, 1,300 mm wide, year 2019 (as new/has never seen snow) – not shown in photos • Including Gmeiner salt spreader type Husky 500V FS with support stands (as new/used twice for testing) • Camera system with 270° panoramic view • Debris hopper made from stainless steel • Wheelbase 1,600 mm • Track width 1,055 mm • Fresh water tank 180 liters • Unladen weight approx. 1,900 kg • Permissible total weight 3,500 kg Dcodsyf E T Sjpfx Afpjc • Length: 4,510 mm / Width: 1,210 mm / Height: 1,970 mm • Travel speed 0–40 km/h • Working speed 0–24 km/h • Noise insulation package • Selectable working speeds: 1,600 – 2,400 rpm (ECO/Standard/MAX) • Engine: water-cooled 4-cylinder VW industrial diesel engine • Low emissions Euro 5 • Fuel tank approx. 60 liters • Hydrostatic all-wheel drive • Dual-circuit high-pressure hydraulics: Circuit 1 (front) 0–50/0–70 l/min 225 bar, Circuit 2 (rear) 0–20/25/30 l/min 195 bar • Hydraulic service brake via foot pedal • Cabin with air-suspended driver’s seat • Air conditioning / heater • Water treatment system • Hydrant connection • Dosing system • Permissible gross weight: 3,500 kg • Unladen weight: 1,950 kg • Other applications possible via additional HAKO attachments such as sweepers, snow ploughs, and lawn mowers (not included) • Errors, changes, and interim sale excepted We sell exclusively according to our terms and conditions and excluding any warranty. Errors, changes, and interim sale excepted. We are available Monday to Friday from 9:00 am – 5:00 pm without interruption, Saturdays by appointment, appointments outside opening hours can be arranged by telephone. We are happy to accept your current used equipment/vehicle as trade-in. Sales to business customers and exporters are given preference, this applies to our entire vehicle inventory. The above information is non-binding, subject to errors and interim sale!

Condition: ready for operation (used), functionality: fully functional, mileage: 54,192 km, power: 55 kW (74.78 HP), first registration: 10/2019, overall weight: 3,500 kg, fuel type: diesel, color: silver, axle configuration: 4x4, maximum load weight: 1,500 kg, empty load weight: 2,000 kg, next inspection (TÜV): 02/2028, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, operating hours: 5,990 h, Equipment: additional headlights, air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1600 Suction Sweeper + Winter Service Package from 1st Owner Major engine inspection with timing belt, water pump, oil, oil filter, fuel filter will be carried out free of charge upon sale Machine version with new drive pedal system 3,215 sweeping hours 5,990 total operating hours 54,192 kilometers 4×4 all-wheel drive – hydrostatic all-wheel drive system Dedpeyf E H Esfx Afpecc Including Kif snow blade, type CM 1600, 1500 mm wide (like new/has never been used in snow) or alternatively with Kif front broom type CM 1600, 1,300 mm wide, year 2019 (like new/has never been used in snow); not shown in the pictures Including Gmeiner salt spreader type Husky 500V FS with support stands (in mint condition/used twice for testing) Camera system with 270° all-round vision Stainless steel debris hopper Wheelbase 1,600 mm Track width 1,055 mm Fresh water tank 180 liters Unladen weight approx. 1,900 kg Gross vehicle weight 3,500 kg Length: 4,510 mm / Width: 1,210 mm / Height: 1,970 mm Travel speed 0-40 km/h Working speed 0-24 km/h Noise insulation package Selectable working speeds: 1,600 - 2,400 rpm (ECO/Standard/MAX) Engine: water-cooled 4-cylinder VW industrial diesel engine Low-emission Euro 5 Fuel tank approx. 60 liters Hydrostatic all-wheel drive system 2-circuit high-pressure hydraulics: Circuit 1 (front) 0–50/0–70 l/min 225 bar, Circuit 2 (rear) 0–20/25/30 l/min 195 bar Hydraulic service brake via foot pedal Cab with air-suspended driver’s seat Air conditioning / heating Water treatment system Hydrant connection Dosing system Gross vehicle weight: 3,500 kg Unladen weight: 1,950 kg Other applications possible with additional attachments from HAKO such as sweeping brooms, snow plows, and lawn mowers (not included) Subject to errors, changes, and prior sale. We sell exclusively under our General Terms and Conditions and exclude any kind of warranty. Subject to errors, changes, and prior sale. We are available continuously Monday to Friday from 9:00 am to 5:00 pm; Saturdays by appointment. Outside these hours, telephone appointments are possible. We are happy to accept your current used machine/vehicle as a trade-in. We prefer selling to commercial customers and exporters; this policy applies to our entire vehicle inventory. The above specifications are non-binding. Subject to errors, changes, and prior sale!

Condition: ready for operation (used), operating hours: 5,991 h, functionality: fully functional, mileage: 54,192 km, power: 55 kW (74.78 HP), first registration: 10/2019, overall weight: 3,500 kg, fuel type: diesel, color: silver, axle configuration: 4x4, maximum load weight: 1,600 kg, empty load weight: 1,900 kg, next inspection (TÜV): 02/2028, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, Equipment: additional headlights, air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1600 Suction Sweeper + Winter Maintenance, Single Owner Major engine service including timing belt, water pump, oil, oil filter, and fuel filter will be performed free of charge upon sale. Machine specification features a new drive pedal system. - 3,215 sweeping hours - 5,990 total operating hours - 54,192 kilometers - 4×4 all-wheel drive – hydrostatic all-wheel drive system - Includes Kif snowplough, type CM 1600, 1500 mm width (like new / has never seen snow) or optionally with Kif front broom, type CM 1600, 1300 mm width, year of manufacture 2019 (like new / has never seen snow), not shown in photos - Includes Gmeiner salt spreader, type Husky 500V FS with support stands (as new / used twice for testing) - Camera system with 270° surround view - Stainless steel debris hopper - Wheelbase: 1,600 mm - Track width: 1,055 mm - Fresh water tank: 180 liters - Unladen weight approx. 1,900 kg - Permissible total weight: 3,500 kg - Length: 4,510 mm / Width: 1,210 mm / Height: 1,970 mm - Driving speed: 0–40 km/h - Working speed: 0–24 km/h - Noise insulation package - Selectable working speeds: 1,600 – 2,400 rpm (ECO/Standard/MAX) - Engine: water-cooled 4-cylinder VW industrial diesel engine - Low-emission Euro 5 - Fuel tank approx. 60 liters - Hydrostatic all-wheel drive system - 2-circuit high-pressure hydraulics: - Circuit 1 (front): 0–50/0–70 l/min at 225 bar - Circuit 2 (rear): 0–20/25/30 l/min at 195 bar - Hydraulic service brake via foot pedal - Cab with air-suspended driver's seat - Air conditioning / heater - Water treatment system - Hydrant connection - Dosing system - Permissible total weight: 3,500 kg - Unladen weight: 1,950 kg - Other potential applications with additional HAKO attachments such as sweeping brushes, snow plows, and mowers (not included in delivery) - Subject to errors, change, and prior sale We sell exclusively in accordance with our General Terms and Conditions and exclude any warranties. Errors, changes, and prior sale reserved. Our business hours are Monday – Friday from 9:00 am to 5:00 pm continuously, Saturday by appointment only. Outside these hours, telephone appointments are possible. Dsdpfxeyf E Hlo Afpjcc We gladly accept your current used machine/vehicle in trade-in. Sales to commercial customers and exporters are preferred. This applies to our entire inventory. The above information is non-binding; errors, changes, and prior sale excepted.

Condition: ready for operation (used), operating hours: 5,990 h, functionality: fully functional, mileage: 54,192 km, power: 55 kW (74.78 HP), first registration: 10/2019, overall weight: 3,500 kg, fuel type: diesel, color: silver, axle configuration: 4x4, maximum load weight: 1,500 kg, empty load weight: 2,000 kg, next inspection (TÜV): 02/2028, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, Equipment: additional headlights, air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1600 Sweeper-Suction Machine from First Owner A major engine service with timing belt, water pump, oil, oil filter, and fuel filter will be carried out free of charge upon sale. Machine version with new drive pedal system 3,215 sweeping operating hours 5,990 total operating hours 54,192 kilometers 4×4 all-wheel drive – hydrostatic all-wheel propulsion Camera system with 270° panoramic view Stainless steel hopper Wheelbase: 1,600 mm Dcsdpfxeyf E E Ie Afpec Track width: 1,055 mm Fresh water tank: 180 liters Unladen weight: approx. 1,900 kg Gross permissible weight: 3,500 kg Dimensions (L × W × H): 4,510 × 1,210 × 1,970 mm Driving speed: 0–40 km/h Working speed: 0–24 km/h Noise insulation package Selectable working rpm: 1,600–2,400 rpm (ECO/Standard/MAX) Engine: water-cooled 4-cylinder VW industrial diesel engine Low emissions Euro 5 Fuel tank capacity: approx. 60 L Hydrostatic all-wheel propulsion 2-circuit high-pressure hydraulics - Circuit 1 (front): 0–50/0–70 l/min at 225 bar - Circuit 2 (rear): 0–20/25/30 l/min at 195 bar Hydraulic service brake via foot pedal Cabin with air-suspended driver’s seat Air conditioning / heating Water treatment system Hydrant connection Dosing system Gross permissible weight: 3,500 kg Unladen weight: 1,950 kg Other operational uses possible with additional HAKO attachments such as brooms, snow plow, and mowing unit (not included in scope of delivery) Errors, changes, and prior sale excepted. Sales are exclusively under our General Terms and Conditions and excluding all warranties. Errors, changes, and prior sale excepted. We are available continuously Monday to Friday from 9:00 a.m. to 5:00 p.m., Saturday by appointment. Outside these hours, appointments can be arranged by phone. We gladly accept your used equipment/vehicle in trade-in. Sales to trade/commercial customers and exporters are given preference; this applies to our entire vehicle inventory. The above information is non-binding. Errors, changes, and prior sale excepted!