Used Troughs for sale (477)

Year of construction: 2008, condition: good (used), The system was used by Mondelez before. It is too large for our needs. ncludes: Dodomnm I Rjpfx Abcjcn 3 trough sections at 5.5 m 1 shute system 4.5 m 3 shute sections at 3 m (with motorized O ring) 4 trough sections at 2.2 m 2 trough sections at 1.3 m 7 vibration platforms model FB-RPG26ES-4 (FastBack) 8 vibration platforms model TLA30H66394_00 (FastBack) 1 control panel 6 electrical panels (Heat and Control) 6 conveyor belts with 50 cm width and 4 m length 6 conveyor belts with 30 cm width and 2 m length 5 elevated conveyor belts with 15 cm width and 3 m length 1 90-degree conveyor belt with 30 cm width and 2 m length Comes with documentation.

Condition: new, Year of construction: 2025, total length: 775 mm, total width: 550 mm, total height: 775 mm, warranty duration: 24 months, nominal power: 0.35 kW (0.48 HP), power: 0.35 kW (0.48 HP), ZTV 50 Trough type vibratory machine * Highly wear resistant P.U.Lining (90 Shore) * High performance three phase current drive motor. (Italian OLI Brand – 0.34 kW) * Changeable valve for the wastewater decharging Dsdpewb Hhdsfx Abcecn * Control panel(EU Standards) included * Main switch and emergency stop switch. * Timer and working hours timer * CE safety standard * Dosing pump included. * The machine has noise isolation lid and metal machine cabinet - The cover is controlled by hand manually - The sound isolation cover provides significant noise reduction when the finishing process is in play. - It also curbs water or finishing compounds spillage from the vibratory finishing machine.

Condition: new, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,800 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Total loading area length approx.: 8,800 mm, low bed approx.: 6,600 mm long, loading height incl. approx. 890 mm, 24 lashing eyes each 10 t, 12 stake pockets in the outer frame, loading ramps (approx. 3,100 x 750 mm), climbing bar on the outside of the ramps and rear slope, loading ramps adjustable to the sides, wooden floor 68 mm thick, storage box with lid for lashing chains or tensioning belts, contour marking according to regulations, rotating beacon, vehicle hot-dip galvanized, , incl. axle load indicators, , surcharge for:, warning signs with lighting and rotating beacon, widening to 3 m with Holzer, price: 500 ¤, , hydraulic displacement of the ramps, price: 1,000 ¤, , excavator trough, price: 1,000 ¤ net, , , --  Misprints, errors and changes reserved, sample- Pictures --, More data at: !, More Details: ! Dsdoxluwxjpfx Abcjcn

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, vibratory feeder bowl feeder make: E+K SORTIERSYSTEM type: EMSE-55GU trough diameter: 800 mm; voltage: 230 volts 50Hz protection: ip 44 Dsdpoicnicofx Abcscn vibration: 3000 vibration controller: REOVIB MFS 168 Sick sensor adjustable height frame inclusive dimensions: height: 1400mm width: 900mm weight: 550 kg

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, year of last overhaul: 2025, Fat fryer Riehle Wendomat 36 Riehle model: Wendomat 36 1 turning basket for max. 36 pieces 1 proofing trolley with 10 aluminium tilting troughs Steam lid, proofing cabinet below Frying station in stainless steel design Connection 400V, 16A CEE plug Used unit, cleaned With warranty & spare parts service Quality from a specialised supplier! Benefit from over 35 years of experience! Option: Maintenance contract Delivery service Additional aluminium tilting troughs Service package Instruction & commissioning Dodpsxiu Ewefx Abcocn Visit us!

Year of construction: 2022, condition: ready for operation (used), General Data Measurements width 710 mm Measurements depth 1565 mm Measurements height 1385 mm Machine weight 350 kg Main Drive Spindle speed range 1500 - 3000 Media Power consumption 700 W This HOFMANN GMT 35 grinding machine was manufactured in 2022. It operates on a 230 V AC supply, with a power consumption of 700 W. Features include a speed range of 1500 - 3000 min⁻¹, a water tank volume of 45 l, and a trough volume of 35 l. Dimensions are 1565 mm in length, 710 mm in width, and 1385 mm in depth, weighing 350 kg. Contact us for more information about this machine. Application Types Dcedpfxjxgwa Ej Abcon Grinding

Condition: good (used), Year of construction: 1994, Type: 2SQ4000/1800 Screening area: 1,800 x 4,000 mm new steel construction with platform and motor frame Dcjdpfxotpguhj Abcjn new discharge trough and discharge chutes

Condition: ready for operation (used), Vibratory finishing system, Slide Grinding Machine,Circular trough vibratory finishing machine, Used Machine Dsdpfxoxdfabj Abcecn Manufacturer: Gránit-Ex Kft Type: FM-10, 1500 x 1500 Year: 2020 Weight: 600 kg d: 550 mm, Circumference: 1670 mm D: 1350 mm, Circumference: 3650 mm Torus: 350 mm

Condition: new, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,200 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Total loading area length approx.: 8,200 mm, low bed approx.: 6,000 mm long, loading height incl. approx. 890 mm, 22 x lashing eyes each 10 t, 10 x stake pockets in the outer frame, loading ramps (approx. 3,100 x 750 mm), climbing bar on the outside of the ramps and rear slope, loading ramps adjustable to the side, wooden floor 68 mm thick, storage box with lid for lashing chains or tensioning belts, contour markings according to regulations, rotating beacon, vehicle hot-dip galvanized, , incl. axle load indicators, , surcharge for:, warning signs with lighting and rotating beacon, widening to 3 m with Holzer, Price: 500 ¤, , excavator trough, Price: 1,000 ¤ net, , , --  Misprints, errors and changes excepted, sample pictures --, More details at: !, More details: ! Dcodpexluxcjfx Abcen

Condition: new, overall weight: 39,000 kg, maximum load weight: 33,060 kg, axle configuration: 3 axles, loading space length: 9,720 mm, loading space width: 2,410 mm, loading space height: 2,200 mm, loading space volume: 52 m³, total width: 2,550 mm, total height: 3,930 mm, Equipment: ABS, Aluminum rear tipping trough approx. 52cbm, aluminum chassis, combination rear door, double-wing door with espagnolette lock/pendulum flap, pneumatic locking, 2 x grain pusher, loading pressure gauge, tarpaulin, ABS, EBS/SAF INTRA CD axle(s), aluminum rims, disc brake system, air suspension with lifting/lowering device, lift axle, support winch(s), vehicle can be covered with advertising and/or labeled Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to make you a financing or leasing offer for this object. Dcjdpfjvnptkex Abcjn Please contact us!

Condition: excellent (used), CATALOGUE NUMBER 7661 TECHNICAL DATA - max. range of processed diameters 140mm - min. input material length 900mm - machining allowance (on the diameter) max. 30mm - 15kW cutter head drive motor - smooth feed speed regulation on the inverter - feed motor approx. 2.2kW - 2 pneumatic actuators - knife setting device - additional sleeves included 80, 100, 130mm - 70mm diameter sleeve installed In order: - feed trough - 4 toothed pulling rollers (including the first two pneumatically adjustable) - 3-knife head - 3 smooth pulling output rollers - dimensions length/width/height 4500x850x1800mm - weight about 3000kg ADVANTAGES – 2 pneumatic cylinders – knife setting device - additional sleeves included – used turning machine Dcjdpownnkmsfx Abcjn – very good condition Net price: PLN 48,900 Net price: EUR 11,500 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: new, neu ca. 12 - 14 Wochen ab Auf Deutschland 25230 € 481.89 € 1250x2500 mm HYPERTHERM Powermax 45 XP 6 mm 12 mm 25 mm 4 mm 45 A 45 A 50 % ED, 32 A 100 % A 24 m/min 1/10 mm 470 l 500 kg/m² 3060 mm 1760 mm 1500 mm 500 kg compressed air powered plasma sourceHYPERTHERM Powermax 45 XP CNC-workbench software (external PC not included) adjustable rollers precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules ALTERNATIVE PLASMA SOURCES: HYPERTHERM PMX 65 Sync PMX 85 Sync PMX 105 Sync PMX 125 Sync plasma type comp. air comp. air comp. air comp. air plunge power 16 mm 20 mm 22 mm 25 mm seperating cut 32 mm 38 mm 50mm 57mm recommended thickness (unalloyed steel) 6 mm 16 mm 19 mm 22mm max. thickness (unalloyed steel) 16 mm 20 mm Djdjwiryuepfx Abcecn 22 mm 25 mm price € 26.820,- € 28.440,- € 30.100,- € 33.290,- (Hypertherm MaxPro200 and KJELLBERG plasma sources available on reques) OPTIONS: water tank to quickly fill and drain thetrough € 2.560,- height adjustment by arc voltage € 2.450,- set-up laser € 240,- pneumatic marking pin € 770,- pneumatic engraver € 1.920,- suction bridge (prepared for suction diam.160mm, important for galvanized and thin sheets) € 1.020,- suction- and filter unit Caremaster IFA 1,1 kW, fan power 2.500 m³/h € 2.950,- higher gantry 200 mm € 710,- higher gantry 300 mm € 900,- automatic nesting € 500,- PlasmaScan camera system € 830,- ohmic contacting for MaxPro200 € 280,-

Condition: used, Comprehensively tested, used Tatham 304 stainless steel twin shaft paddle mixer. Manufacturer: Tatham Material: Stainless steel Capacity: 1,000 litres (approx) Djdpfx Absxlgh Nocscn Mixing trough: 1700mm wide x 1500mm long x 1450mm deep Discharge Type: Pneumatically operated twin bomb door discharge Motor: Twin shaft paddles chain driven by 15 kw 415 volt 3/50 motor Also includes: Unit is mounted on mild steel frame A video of this mixer is available below. ?v=iV2YFSJEqPc

Condition: used, Year of construction: 2001, functionality: fully functional, Chain Belt Conveyor Paal, Type KEM-1400, Year of Manufacture 2001, Usable Width 1400 mm Technical Data: Manufacturer: Paal Type: KEM-1400 Year of manufacture: 2001 Drive power: 4 kW Speed: 0.27 m/s Axle spacing: approx. 12,000 mm Feed belt: 3,000 mm Inclined section: 6,500 mm Usable width: 1,400 mm Trough depth (horizontal/incline): 527/1027 mm Incline angle: 30° Weight: approx. 5,000 kg Remarks: The conveyor belt was dismantled from ongoing operation. The chain is in poor condition and should be replaced. An approx. 10 m spare chain is included in the scope of delivery. Dcsdpfx Abexfrgwecon The operating manual and CE declaration are available in German. Please note: All technical data is based on manufacturer information. We accept no liability for the accuracy of the information provided or for any errors. Offers are non-binding, subject to prior sale, and may be revoked at any time. Inspection appointments can be arranged by appointment. Sale is ex location, without warranty or guarantee. Our payment condition is 100% advance payment.

Condition: new, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,800 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Total loading area length approx.: 8,800 mm, low bed approx.: 6,600 mm long, loading height incl. approx. 890 mm, 24 lashing eyes each 10 t, 12 stake pockets in the outer frame, loading ramps (approx. 3,100 x 750 mm), climbing bar on the outside of the ramps and rear slope, loading ramps adjustable to the sides, wooden floor 68 mm thick, storage box with lid for lashing chains or tensioning belts, contour marking according to regulations, rotating beacon, vehicle hot-dip galvanized, , incl. axle load indicators, , surcharge for:, warning signs with lighting and rotating beacon, widening to 3 m with Holzer, price: 500 ¤, , hydraulic displacement of the ramps, price: 1,000 ¤, , excavator trough, price: 1,000 ¤ net, , , --  Misprints, errors and changes reserved, sample- Pictures --, More data at: !, More Details: ! Dcedpsxhdi Nofx Abcen

Condition: good (used), Year of construction: 2010, functionality: fully functional, new container with completely new layer PU-cover with ca. 6mm cover thickness usable volume: 165 liter trough inner measures: 1100mm x 460mm x 525mm Dcsdpfot Ahqyex Abcsn empty weight: ca. 850kg motor speed: 1500 rpm sound insulating cabinet extern dimensions: 1900mm x 1250mm x 1550mm band filter device Seitz

Condition: new, Year of construction: 2025, functionality: fully functional, Filling system consisting of the following components: 1. Cross Trough: Trough width: 2.8 m Trough height (lower side): only 0.8 m Trough depth: 1.2 m incl. protective grid on top incl. 3 kW gear motor Dcsdpfx Asvrcfujbcsn left and right versions available Optional: chassis, forklift adaptation, .... 2. Inclined Screw Conveyor: Length: 2 m (other lengths available upon request) Variable inclination incl. 3 kW gear motor 3. Feed Screw: Length: 2 m (other lengths available) Open on the end face All screw conveyors have a diameter of 200 mm and are continuously welded onto a steel tube! (Larger screw diameters also available upon request!) Without wiring and control system We are also happy to offer you custom-made designs! Prices excl. VAT.

Condition: new, neu ca. 12 - 14 Wochen ab Auf Deutschland 28370 € 541.87 € 1500x3000 mm HYPERTHERM Powermax 45 XP 6 mm 12 mm 25 mm 4 mm 45 A 45 A 50 % ED, 32 A 100 % A 24 m/min 1/10 mm 630 l 400 kg/m² 3560 mm 1960 mm 1500 mm 650 kg compressed air powered plasma sourceHYPERTHERM Powermax 45 CNC-workbench software (external PC not included) adjustable rollers precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules Dcedpfswirx Rox Abcon ALTERNATIVE PLASMA SOURCES: HYPERTHERM PMX 65 Sync PMX 85 Sync PMX 105 Sync PMX 125 plasma type comp. air comp. air comp. air comp. air plunge power 16 mm 20 mm 22 mm 25 mm seperating cut 32 mm 38 mm 50mm 57mm recommended thickness (unalloyed steel) 6 mm 16 mm 19 mm 22mm max. thickness (unalloyed steel) 16 mm 20 mm 22 mm 25mm price € 29.960,- € 31.580,- € 33.240,- € 36.420,- (Hypertherm MaxPro200 and KJELLBERG plasma sources available on reques) OPTIONS: water tank to quickly fill and drain thetrough € 3.500,- height adjustment by arc voltage € 2.450,- set-up laser € 240,- pneumatic marking pin € 770,- pneumatic engraver € 1.920,- suction bridge (prepared for suction diam.160mm, important for galvanized and thin sheets) € 1.020,- suction- and filter unit Caremaster IFA 1,1 kW, fan power 2.500 m³/h € 2.950,- higher gantry 200 mm € 710,- higher gantry 300 mm € 900,- automatic nesting € 500,- PlasmaScan camera system € 830,- ohmic contacting for MaxPro200 € 280,-

Condition: refurbished (used), battery capacity: 375 Ah, battery voltage: 80 V, total height: 583 mm, total length: 982 mm, total width: 690 mm, Tested forklift battery for your truck – 80V 3PZS 375Ah – special trough + 1 year warranty + incl. Aquamatik + incl. end conductor & REMA 320 connector (other connectors can be installed upon request) + Capacity: min. 90-100% (C5 capacity protocol will be supplied upon delivery) + Year of delivery: 2024 Dedewzv Akspfx Abcecn Dimensions: Length: 982 mm Width: 690 mm Height: 583 mm Weight: approx. 985 kg Suitable for the following models and others: Toyota FBM20 Hyster E2.2-3.5XN Hyster E200XM Common battery sizes available, please inquire. Transport possible.

Condition: new, Year of construction: 2025, functionality: fully functional, turning height: 3,000 mm, workpiece weight (max.): 50,000 kg, turning diameter: 5,500 mm, feed length X-axis: 3,150 mm, feed length Z-axis: 1,800 mm, faceplate diameter: 4,500 mm, total height: 8,000 mm, total width: 7,000 mm, total length: 12,000 mm, rotary table diameter: 4,500 mm, table load: 50,000 kg, warranty duration: 12 months, Vertical Turning Lathe, model SCR 55 New - In the process of Building - 2025 model year. Can be fitted with: Milling options, Various colors, Coolant trough spindle, Fanuc CNC (or similar). Table Diameter - 4,500 mm Max. Machining Diameter - 5,500 mm Dodpfx Abjunrumscecn Swing Diameter - 5,500 mm Max. Machining Height (Max. Distance between Table Top and Standard Turning Tool Holder with Tool) - 3,000 mm Max. Workpiece Weight - 50,000 kg No. of clamping jaws (standard) - 8 Linear Travels X - Axis (Ram Carriage along the cross rail) (-200/+2,950 mm) + ATC travel Z - Axis (Ram vertical displacement) 1,800 mm Cross Rail travel 2,600 mm Table diameter 4,500 mm Standard table with T-slots Belt transmission Spindle speed range (continuously variable) 0 to 1,500 rpm Feed Motor power 5.5 kW Max. Thrust force 60,000 N

Condition: new, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,200 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Total loading area length approx.: 8,200 mm, low bed approx.: 6,000 mm long, loading height incl. approx. 890 mm, 22 lashing eyes each 10 t, 10 stake pockets in the outer frame, loading ramps (approx. 3,100 x 750 mm), climbing bar on the outside of the ramps and rear slope, loading ramps adjustable to the sides, wooden floor 68 mm thick, storage box with lid for lashing chains or tensioning belts, contour marking according to regulations, rotating beacon, vehicle hot-dip galvanized, , incl. axle load indicators, , surcharge for:, warning signs with lighting and rotating beacon, widening to 3 m with Holzer, price: 500 ¤, , hydraulic displacement of the ramps, price: 1,000 ¤, , excavator trough, price: 1,000 ¤ net, , , --  Misprints, errors and changes reserved, sample- Pictures --, More data at: !, More Details: ! Dcedpfxexghuaj Abcsn

Condition: new, neu ca. 12 - 14 Wochen ab Auf Deutschland 22750 € 436.8 € 1000x2000 mm HYPERTHERM Powermax 45 XP 6 mm 12 mm 25 mm 4 mm 45 A 45 A 50 % ED, 32 A 100 % A 24 m/min unter 1/10 mm 300 l 400 kg/m² 2560 mm 1460 mm 1500 mm 400 kg compressed air powered plasma sourceHYPERTHERM Powermax 45 XP CNC-workbench software (external PC not included) adjustable rollers precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules alternative plasma sources: HYPERTHERM PMX 65 Sync PMX 85 Sync PMX 105 Sync PMX 125 plasma type Dodpfx Abowiq Scscocn comp. air comp. air comp. air comp. air plunge power 16 mm 20 mm 22 mm 25 mm seperating cut 32 mm 38 mm 50mm 57mm recommended thickness (unalloyed steel) 6 mm 16 mm 19 mm 22mm max. thickness (unalloyed steel) 16 mm 20 mm 22 mm 25mm price € 24.340,- € 25.960,- € 27.620,- € 30.800,- (Hypertherm MaxPro200 or KJELLBERG plasma sources available on request) options: water tank to quickly fill and drain thetrough € 2.560,- height adjustment by arc voltage € 2.450,- set-up laser € 240,- pneumatic marking pin € 770,- pneumatic engraver € 1.920,- suction bridge (prepared for suction diam.160mm, important for galvanized and thin sheets) € 1.020,- suction- and filter unit Caremaster IFA 1,1 kW, fan power 2.500 m³/h € 2.950,- higher gantry 200 mm € 710,- higher gantry 300 mm € 900,- automatic nesting € 500,- PlasmaScan camera system € 830,- ohmic contacting for MaxPro200 € 280,-

Condition: new, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,800 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Total loading area length approx.: 8,800 mm, low bed approx.: 6,600 mm long, loading height incl. approx. 890 mm, 24 lashing eyes each 10 t, 12 stake pockets in the outer frame, loading ramps (approx. 3,100 x 750 mm), climbing bar on the outside of the ramps and rear slope, loading ramps adjustable to the sides, wooden floor 68 mm thick, storage box with lid for lashing chains or tensioning belts, contour marking according to regulations, rotating beacon, vehicle hot-dip galvanized, , incl. axle load indicators, , surcharge for:, warning signs with lighting and rotating beacon, widening to 3 m with Holzer, price: 500 ¤, , hydraulic displacement of the ramps, price: 1,000 ¤, , excavator trough, price: 1,000 ¤ net, , , --  Misprints, errors and changes reserved, sample- Pictures --, More data at: !, More Details: ! Dcsdpfxoxfrb Is Abcsn

Condition: new, Year of construction: 2024, neu 2024 2517 prompt, Zwischenverkauf v Deutschland 40130 € 766.48 € 1 1500x3000 mm Hypertherm Powermax 125 25 mm 25 mm 57 mm 25 mm 125 A 24 m/min 1/10 mm 400 kg/m² 3560 mm 1960 mm 1500 mm 650 kg DEMO MACHINE compressed air powered plasma sourceHYPERTHERM Powermax 125 Dodewva Iaepfx Abcocn CNC-workbench software (external PC not included) adjustable rollers precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules INCL. FOLLOWING OPTIONS: Height adjustment by arc voltage Set-up laser Suction bridge (prepared for suction diam. 160 mm)

Condition: new, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,200 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Total loading area length approx.: 8,200 mm, low bed approx.: 6,000 mm long, loading height incl. approx. 890 mm, 22 lashing eyes each 10 t, 10 stake pockets in the outer frame, loading ramps (approx. 3,100 x 750 mm), climbing bar on the outside of the ramps and rear slope, loading ramps adjustable to the sides, wooden floor 68 mm thick, storage box with lid for lashing chains or tensioning belts, contour marking according to regulations, rotating beacon, vehicle hot-dip galvanized, , incl. axle load indicators, , surcharge for:, warning signs with lighting and rotating beacon, widening to 3 m with Holzer, price: 500 ¤, , hydraulic displacement of the ramps, price: 1,000 ¤, , excavator trough, price: 1,000 ¤ net, , , --  Misprints, errors and changes reserved, sample- Pictures --, More data at: !, More Details: ! Dodpfx Abjxdu Arocscn