Used Trumpf 2530 for sale (373)

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 80,087 h, machine/vehicle number: S2321M0007, control type: CNC control, controller manufacturer: SIEMENS, controller model: SINUMERIK, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruFiber, laser power: 400 W, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, TECHNICAL DETAILS General Information Model: TruLaser Cell 3000 Machine type: highly dynamic and precise CNC laser machine Machine bed: polymer concrete Axis concept: cantilever system Travel ranges and axes Travel ranges X/Y/Z: 800 × 600 × 400 mm X/Y axes: linear motors Measuring system: direct, absolute measuring system Z axis: linear guides and ball screw drive Control and operation Control system: TRUMPF based on Siemens Sinumerik 840D sl Operation: panel PC for process monitoring Cooling and electrical system Control cabinet: integrated Water cooler: water-air Laser unit Laser unit: TruFiber 400 (G2) Laser type: single-mode fiber laser Application area: welding and cutting Laser power: 400 W at the fiber end Beam quality M²: 1.1 Fiber optic cable: 6 m LLK-B Operating mode: CW / modulated Modulation frequency: max. 50 kHz Pilot laser: standard Coil feeder Manufacturer: TRUMPF Design: for strip material Material length: max. 800 mm Material thickness: 0.1–1.9 mm Material width: 40–250 mm Width adjustment: by handwheel Pneumatic coil feed: 50 mm stroke, right EQUIPMENT Tensioning and guiding module for coil material Guided workpiece removal, selectable as box or funnel system Bdodpfxsz R Dz As Airoi Pneumatic coil feed Coil feed control Panel PC for process monitoring Integrated control cabinet Water-air cooler Commissioning and training

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 28,000 h, controller model: Siemens Sinumerik 840 D SL, laser power: 5,000 W, sheet thickness steel (max.): 25 mm, working length: 4,000 mm, working width: 2,000 mm, The machine will be powered until Wednesday, November 4th, and will then be dismantled. TECHNICAL DETAILS Resonator power: 5 kW Working area (L x W): 4,000 x 2,000 mm Sheet thickness, steel: max. 25 mm Sheet thickness, stainless steel: max. 20 mm Sheet thickness, aluminum: max. 20 mm Bdjdpfe Agvnkjx Airei Speed: max. 235 m/min Accuracy: 0.001 mm MACHINE DETAILS Control system: Siemens Sinumerik 840 D SL Dimensions & Weight Dimensions (L x W x H): 12,000 x 5,300 x 2,200 mm Machine weight: 13,000 kg Operating hours: 28,000 h EQUIPMENT LiftMaster Power supply for TruDisk via the machine Work area lighting Position laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning TRUMPF laser Solid-state laser TruDisk 5001 with one LLK output Light guide cable according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control Laser logbook function Cutting head Universal cutting unit with fully adaptive lens system Protective glass against lens contamination Condition monitoring of the protective glass ControlLine: Height control and sheet edge detection 17-inch touch color screen Simple workshop programming Advanced workshop programming Fast reproduction Integrated technology data Automatic shutdown FastLine FlyLine AdjustLine Remote service via internet USB interface RJ-45 network connection CE marking Light barriers Multi-camera base system Compact dust extraction system Machine cladding with certified viewing window, door on the right Electric roll-up roof Retrofit capability for max. 2 additional LLK outputs

Condition: ready for operation (used), Year of construction: 2005, operating hours: 15,202 h, laser power: 2,700 W, travel distance X-axis: 2,500 mm, number of axes: 3, This 3-axis TRUMPF TRUMATIC L 2530 Plus was manufactured in 2005 and will come with a Storemaster. It features a powerful 2700 W laser and includes advanced equipment such as a laser cutting head with 3.75" and 7.5" lenses, automatic sheet edge detection, and programmable cutting gas selection. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TRUMATIC L 2530 Plus CO2 laser cutting machine we have for sale. Contact us for further details. - Mains Supply: 400 V / 50 Hz- Connected Load: 63 kVA- Control Voltage: 24 V =- Required Fuse Protection: 3x 100 A- Compressed Air Connection: 7-10 bar- Nitrogen Connection (N2): 30 bar- Oxygen Connection (O2): 16 bar- Standard Equipment: Hi-Las high-pressure cutting, Laser cutting head with 3.75" lens, Laser cutting head with 7.5" lens, Cutting head quick-change device, Automatic sheet outer edge detection, Positioning laser diode, Programmable cutting gas selection/pressure setting, Microweld, SprintLas, Capacitive height control (DIAS III), ContourLas, AutoLas Plus, Oil spray device, Automatic pallet changer, Working area lighting, Slag/small parts chute, Multi-chamber dust extraction, Compact dust extractor, Automatic shut-off, Safety devices, ToPs 100 lite, Tele-diagnosis device, RJ45 network connection- Special Equipment & Accessories: 3.5" floppy disk drive, Detailed operating manual, Automatic pallet changer with safety light barrier, AutoLas Plus, Clamping jaws for Pallet A+B (4 pcs each), Additional 3.75" laser cutting head, Loading device (overhauled in workshop 2017), Programming software TRUMPF TruTops Laser, Gas fittings, Teleservice via Internet- Chiller Unit (Riedel L15/21-TR3.23, YOM: 10/2004): 400 V / 50 Hz, 42 A, IP54, Refrigerant R134a (11.5 kg), Max working pressure 20.2 barStoremaster:- Drawer Usable Area: 2,500 x 1,250 mm- Max Load per Drawer (evenly distributed): 3,000 kg- Max Load per Top Level (evenly distributed): 3,000 kg- Max Load per Rack Block (evenly distributed): 60,000 kg- Max Load at Crane Hook: 325 kg- Max Load under Vacuum Lifter (evenly distributed): 180 kg- Special Equipment: SCHMALZ vacuum lifter- Dimensions (from technical drawing): Height ca. 3,500 mm / 4,170 mm (modified/adjusted height ca. 3,500 mm), Width ca. 3,600 mm - 5,900 mm depending on layout/extension, Depth ca. 2,700 mm - 4,700 mm- Upper Grid Floors Capacity: 7,500 kg surface load each Bdedpfx Aijz R Aa Rjroi

Condition: good (used), Year of construction: 2008, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, working range: 2,500 mm, Equipment: cooling unit, TRUMPF TruLaser 2525 - 4 kw (formerly Trumatic L 2530) Working area: 2,500 x 1,250 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts Max. Sheet thickness mild steel: 20 mm Max. Sheet thickness stainless steel: 15 mm Max. Sheet thickness aluminum: 10 mm STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit - TFT color screen - Position laser diode - Motion unit for high-precision processing - Additional highly dynamic Yp axis - Drives with maintenance-free three-phase servomotors - Closed beam guidance - Conveyor for small parts and waste - NitroLine - FlyLine - Piercing end detection TRUMPF LASER: - CO2 laser TruFlow 3200 - High frequency excitation - Maintenance-friendly turbo radial blower - Gas mixer (integrated) - Laser power control - Laser logbook function CUTTING HEAD: - Laser cutting head with 5" lens - Laser cutting head with 7.5" lens - Universal quick-change device - ControlLine CONTROL: - SIEMENS Sinumerik 840D control system - Automatic switch-off - ContourLine - SprintLine - Teleservice - Microweld - RJ45 network connection - 3.5" floppy disk drive - Network connection via telediagnosis SAFETY: Bedpfxjrwlwne Airodi - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extraction system - Workshop programming EXTENDED EQUIPMENT: - More powerful TruFlow 4000 laser - Automatic pallet changer

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, Press force: 225 t Bending length: 3050 mm Throat depth: 405 mm Table width: 140 mm Bodpfxszw Adqj Airjdi Machine weight (approx.): 14,100 kg Space requirement (approx.): 4000x1900x3100 mm Accessories: - Control system upgrade in 2026 to Cybelec VisiTouch - 1 bending aid - Side protective doors - Laser safety system - Pneumatic tool holder EHT 26 mm - Crowning - Pneumatic die shifting - Foot switch - Controlled axes: y1, y2, x, R, z1, z2

Condition: excellent (used), Year of construction: 2010, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Information Manufacturer: TRUMPF Model: TruLaser 5030 fiber (L41) Machine Type: Laser cutting machine Year of Manufacture: 2010 Available: End of October 2026 Weight: 12,000 kg Working Area Working area X/Y/Z: 3,000 × 1,500 × 115 mm Speed: max. 300 m/min Accuracy: 0.05 mm Laser Laser: TruDisk 3001 solid-state laser Laser power: 3 kW Laser operating time: approx. 35,000 h Cutting Capacities Sheet thickness steel: max. 20 mm Sheet thickness stainless steel: max. 15 mm Sheet thickness aluminum: max. 15 mm Control and Operation Control system: Siemens SINUMERIK 840D SL Touch color screen: 17 inches Machine Dimensions Length: 9,950 mm Width: 4,600 mm Height: 2,400 mm Costs IT costs: 3,000 EUR EQUIPMENT Enclosed machine frame with integrated laser unit Motion unit for highly precise machining Bdsdpfoz S Egijx Airei Torque drive in combination with linear direct drives Enclosed, fiber-guided beam entry Machine cooling unit, water-air Integrated control cabinets with internal lighting Common main switch for machine and laser Automatic pallet changer in the longitudinal direction Longitudinal conveyor belt Power supply for the TruDisk via the machine Work area lighting Position laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Laser cooling unit, water-air Excitation via pump diodes with long service life Laser power control Laser logbook function Universal cutting unit with fully adaptive lens system Single-cut head strategy Protective glass against lens contamination ControlLine height control and sheet outer edge detection Workshop programming Fast reproduction Integrated technology data Automatic shutdown Programmable cutting gas and pressure selection FastLine FlyLine Remote service via the internet Diagnostic functions Integrated e-shop USB interface RJ-45 network connection CE marking Light barriers Multi-chamber extraction system Integrated compact dust extraction system Machine cladding with certified viewing window Door on the right Electric roll-up roof

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 11,800 h, laser power: 3,200 W, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 4 mm, No minimum price – guaranteed sale to the highest bidder! Includes SheetMaster, ToolMaster, GripMaster! TECHNICAL DETAILS Laser power: 3,200 W Laser type: CO₂ laser TruFlow 3200 Bodpe Ahhi Uofx Airsdi Combined punching/laser working area: 3,000 × 1,500 mm Punching mode working area: 3,000 × 1,500 mm Laser mode working area: 3,000 × 1,500 mm Max. sheet thickness, structural steel: max. 8 mm Max. sheet thickness, stainless steel: max. 8 mm Max. sheet thickness, aluminum: max. 4 mm Max. punching force: max. 220 kN Max. punching stroke rate at E = 1 mm: max. 900/min Max. marking stroke rate: max. approx. 2,800/min Max. number of multi-tools with 3 clamping units: max. 18 Tool capacity: 180 tools Max. axis speed X/Y simultaneously: max. 108 m/min MACHINE DETAILS Operating hours: 11,800 h Laser on time: 42,100 h EQUIPMENT SheetMaster ToolMaster GripMaster Large-format working area without repositioning Linear magazine with multi-tools SheetMaster with two large-format tables Automatic scrap sheet removal to lifting table

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, Submitting a bid obligates the bidder to collect the item by December 1, 2026. No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Information Manufacturer: TRUMPF Model: TruLaser 7040 (L62) Year of Manufacture: 2012 Operating Hours: need to be updated Working Area Working area X/Y/Z: 4,000 × 2,500 × 115 mm Speed: max. 304 m/min Accuracy: ±0.1 mm Laser Laser power: 2 × 4 kW Laser heads: 2 units Condition of laser heads: functional Cutting Capacities Sheet metal thickness steel: max. 20 mm Sheet metal thickness stainless steel: max. 15 mm Sheet metal thickness aluminum: max. 10 mm Control System Control system: Siemens Sinumerik 840 D SL Machine Dimensions and Weight Length: 15,800 mm Width: 7,280 mm Height: 3,090 mm Weight: 16,500 kg Environmental Conditions Ambient temperature: max. 43 °C EQUIPMENT Thin sheet metal productivity package for high-speed, standard, and compressed air cutting 2 lens cutting heads with 130 mm focal length Compressed air cutting BrightLine Bdsdpfxj Aayn Ns Airsi CoolLine with 2 separate lens cutting heads 4 clamping jaws, 2 per pallet Wide transverse conveyor belt “Wavebelt” with tilting container Tilting container to the left of the machine More powerful compact dust extractor Connection piece for the exhaust duct of the compact dust extractor MDE interface

Condition: good (used), functionality: fully functional, Year of construction: 2019, operating hours: 25,995 h, control type: CNC control, degree of automation: automatic, controller manufacturer: Siemens, controller model: SINUMERIK 840D SL, laser type: diode laser, laser source manufacturer: TRUMPF, laser hours: 14,600 h, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 8 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, feed rate X-axis: 100 m/min, feed rate Y-axis: 100 m/min, feed rate Z-axis: 100 m/min, workpiece weight (max.): 900 kg, input current: 42 A, type of cooling: water, year of last overhaul: 2026, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Special equipment: + LiftMaster Compact 1530 (Type AL34) with loading cart + 3001 on TruDisk 4001 + BrightLine fiber + Nozzle changer + Wireless Operation Point + Performance package for fusion cutting + High-speed cutting package + High-speed eco cutting package + Copper cutting package + Brass cutting package + Transverse conveyor with tilting hopper + Storage interface Bdjdpfs Ahhu Usx Airei + LiftMaster Compact 1530 (Type AL34 with loading cart) + Auxiliary pallet operation with loading cart + Safety fence Optional, at an extra cost: 1. Assembly, commissioning, partial overhaul and training of up to 3 operators at the customer's site, with a functional guarantee upon acceptance. 2. Workshop overhaul of the machine with commissioning and acceptance according to manufacturer's specifications in our workshop. Assembly, commissioning of the machine, and training of up to 3 operators at the customer's site. Standard equipment: - Closed machine frame - Automatic pallet changer in the longitudinal direction - Torque drive in combination with linear direct drives - Closed beam guidance via fiber optic cable - Machine cooling unit (water-air) - Integrated control cabinets with internal lighting - Longitudinal conveyor - Work area lighting - Positioning laser diode - Spraying device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning - Transport and assembly device TRUMPF Laser - Solid-state laser TruDisk with 1 fiber optic output - Laser cooling unit (water-air) - Excitation via pump diodes - Laser power control Cutting unit - Universal cutting unit - Single cutting head strategy - Protective glass against lens contamination - ControlLine: Height control and sheet edge detection Control system - Workshop programming (TruTops via network access) - Quick reproduction - Touch color screen - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - ContourLine - Microweld - FastLine - FlyLine - AdjustLine - Teleservice via internet Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust collector - Machine enclosure with certified viewing window (right door) - Roof cover

Condition: excellent (used), Year of construction: 2022, operating hours: 2,540 h, machine/vehicle number: A1121D0047, control type: CNC control, degree of automation: automatic, actuation type: electric, controller model: Touchpoint HMI, laser type: fiber laser, laser source manufacturer: Trumpf, laser source model: TruDisk 3001, laser hours: 738 h, laser power: 3,000 W, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 5 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, table length: 2,500 mm, table width: 1,250 mm, working length: 2,500 mm, working width: 1,250 mm, travel distance X-axis: 2,535 mm, travel distance Y-axis: 1,250 mm, feed rate X-axis: 108 m/min, feed rate Y-axis: 108 m/min, workpiece weight (max.): 150 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, We offer a well-maintained TRUMPF TruMatic 3000 (K09) combined laser and punching machine, manufactured in 2022. Manufacturer: TRUMPF Model: TruMatic 3000 (K09) Material number: 2448753 Power frequency: 50 Hz Voltage: 400 V Diagram number and version: 93120-5-200_05 Bdsdpfx Ais Af Uvysroi Serial number: 407618918 Year of manufacture: 2022 Equipment number: A1121D0047 This is an excellent machine located in a clean production environment. It has only been used to process thin sheet metal under 3mm. It has almost all optional features selected from TRUMPF. It is equipped with SheetMaster and SortMaster. It comes with more than 500 tools, automatic QuickSet, and QuickSharp. It is currently in operation and can be inspected by appointment. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: like new (used), functionality: fully functional, Year of construction: 2020, operating hours: 3,956 h, machine/vehicle number: A1440D0207, controller model: Sinumerik 840D SL, laser type: diode laser, laser source manufacturer: Trumpf, laser source model: TruDisk 2001 solid-state laser, laser hours: 3,432 h, laser power: 2,000 W, sheet thickness (max.): 8 mm, pipe diameter (max.): 152 mm, travel distance X-axis: 6,500 mm, feed rate X-axis: 170 m/min, workpiece weight (max.): 130 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 17,000 kg, total length: 16,000 mm, total width: 7,000 mm, total height: 2,800 mm, tube wall thickness (max.): 8 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Manufacturer | TRUMPF Model | TruLaser Tube 5000 fiber (T06) Machine number | A1440D0207 Bjdoz Ii A Sopfx Airjdi Year of manufacture | 01-2020 Laser power | 2,000 W / 2 kW Laser source | TruDisk 2001 solid-state laser, single laser output Raw material length | 6,500 mm Finished part length | 4,500 mm Maximum LoadMaster bundle weight | 4,000 kg Control | TRUMPF control system based on Sinumerik 840D SL Operator panel | Pivoting panel with 19-inch touchscreen Cutting head | Lens cutting head with 150 mm focal length Electrical supply | 400 V / 50 Hz; IEC electrical standard Bevel cutting | Not fitted Factory options Extended finished-part handling — 4.5 m The standard 3 m finished-part configuration is extended by 1.5 m, including an additional finished-part support. RapidCut Dynamic additional axis for increased acceleration during cutting movements. SeamLine Tube Weld seam detection on the outside of the tube. LoadMaster Tube with automatic setup Automatic loading system for 6.5 m raw material, with a bundle loading area rated for a maximum bundle weight of 4,000 kg. Automatic setting of compartment height and compartment width. Adaptive clamping systems Feed station equipped with additional clamping elements for L profiles, U profiles, and flat material. Feed-through chuck equipped with special clamping rollers for these material types. Brass and copper cutting packages Brass cutting package with nitrogen cutting data. Copper cutting package with oxygen cutting data. These packages do not include bevel cutting data. Machine construction and material handling Feed station with self-centering clamping jaws and a feed-through chuck with self-centering tensioning rollers. Raw-material support with automatically retractable tube supports, and finished-part support with extendable guide rollers. High-precision drives and work-area illumination. Parts deposit with one conveyor table and conveyor-table extension. Part-removal station with scrap conveyor belt and collection container. Laser and process control TruDisk 2001 solid-state laser. ControlLine, FocusLine, and NitroLine functions. Integrated technology data, programmable cutting-gas pressure, automatic switch-on and shutdown, and Condition Guide. Remote support interface, USB interface, RJ45 network interface, Central Link, and Online Update Manager. Availability of connected services is not represented as an included subscription. Factory-specified tooling Clamping-jaw pair up to Ø152 mm and round-tube form supports up to Ø152 mm. Rectangular-tube form supports described in the factory specification as “up to 29 mm, 36 mm, 43 mm, 85 mm, and 170 mm outer circle,” plus guide rollers for round and rectangular tubes. Software and documentation Original factory software package: - TruTops Tube including 3D tube construction. - 3D tube interface. - Positioning aids. - Bend connection. - TruTops Monitor complete package. Condition Condition: Excellent used condition; in perfect working order. Machine operating hours: [3956] Laser hours: [3432] Machine location: [Gabrovo, Bulgaria] Availability: [Immediate] Inspection / cutting demonstration: [Immediate] Dismantling, loading, transport, and recommissioning: Scope and costs to be agreed separately. We will provide full support for loading and arranging the transportation.

Condition: good (used), functionality: fully functional, Year of construction: 2008, The machine is powered on and can be inspected at any time. TRUMPF TruLaser Tube 7000 (T02) X working area max.: 6500mm Y working area max.: 320mm Control system: SINUMERIK 840D Standard equipment: Machine - Rotating and feed station with self-centering clamping jaws - Tube support for raw material with automatically retractable tube supports - Feed chuck with self-centering parallel clamping rollers - High-precision drives - Unloading station with brush table, finished part lengths up to 3000mm - Tube support for finished parts with extendable guide rollers - Enclosed beam guidance - NitroLine - SprintLine - Laser power control - Programmable cutting gas pressure - Automatic shutdown - Work area lighting - X-axis table movement, pneumatic - FocusLine - More powerful compact dust extractor - Max. outer diameter 200mm - Max. raw material length 6500mm - Min. raw material length 2500mm TRUMPF Laser - CO2 laser TruFlow 2000 - High-frequency excitation - Maintenance-free turbo radial blower - Laser control TASC 3 - Laser logbook function - Cooling unit Bjde Ahi Tgopfx Airjdi Cutting head - Laser cutting head with 155 mm (6") lens - Cutting head quick-change device - ControlLine Control system - Easy operation with touchscreen - Diagnostic functions - Integrated technology data Data transfer - RJ45 network connection and USB interface Safety - CE marking - Multi-beam light barriers - Monitoring system for gas pressure, temperature, and coolant - Compact dust extraction system - Protective cabin with Makrolon panels + TruFlow 3600 + Unloading at the front and rear + SeamLine Tube + Teleservice via modem instead of via the internet Automation LoadMaster Tube 6m + LoadMaster Tube 6m with bundle support, 2 gripper options LoadMaster Tube 6m + Scratch protection arms, bundle support LoadMaster Tube 6m + Swiveling conveyor belt LoadMaster Tube 6m

Condition: good (used), functionality: fully functional, Year of construction: 2007, laser type: CO₂ laser, laser power: 2,700 W, X working range max.: 6500 mm Y working range max.: 200 mm Laser power: 2700 watts Control system: SINUMERIK 840D Standard equipment: - Robust machine frame with integrated laser unit - CO2 laser TruFlow 2000, high-frequency powered, cooling unit - Drives: Maintenance-free three-phase AC servomotors - NitroLine high-pressure cutting - Fast processing with SprintLine - Cutting gas pressure setting programmable - Laser cutting head with 5’’ lens - Cutting head quick-change system - Laser power control - Laser logbook function - Automatic shutdown - Work area lighting - Control system Sinumerik 840D: Open control system based on PC, easy operation, online help, diagnostic function, maintenance logbook, technology data, remote service, 3.5’’ floppy disk drive, RJ45 network connection - Safety: Multi-beam light barriers, beam guidance completely enclosed and ventilated, compact dust collector, protective cabin - Unloading station PRS 3001 with brush table - Clamping jaw set D 20-85mm and D 85-150mm Optional equipment: + 2000 on Laser TruFlow 2700 Bjdpfx Aij Ahkc Tjrodi + SeamLine Tube + LoadMaster Tube 6.5 m with bundle trough + Unloading station 6m with belt table + Focus line

Condition: ready for operation (used), Year of construction: 2017, operating hours: 10,020 h, controller manufacturer: TRUMPF, controller model: TASC 6000, pressing force: 173 t, Press brake manufactured in 2017. This TRUMPF TRUBEND CELL 5000 with TRUMPF TruBend 5170 features a maximum press force of 1700 kN and a stroke length of 445 mm. It includes the BendMaster 60 robot for automated handling and a TRUMPF TASC 6000 control system for efficient programming. If you are looking to get high-quality bending capabilities, consider the TRUMPF TRUBEND CELL 5000 press brake we have for sale. Contact us for further details. Bdjdpfx Aisza U Nforji - Press Brake Model: TruBend 5170 (Extended Version)- Press Brake Max Press Force: 1700 kN- Press Brake Max Working Pressure: 340 bar- Press Brake Length of Stroke: 445 mm- Press Brake Voltage / Frequency: 400 V / 50 Hz- Press Brake Connected Load: 29 kVA- Press Brake Control Voltage: 24 V- Robot Model: BendMaster 60- Robot Connected Load: 17 kVA- Robot Weight: 2600 kg- Robot Voltage / Frequency: 400 V / 50 Hz- Control System: TRUMPF TASC 6000 (Graphical workshop programming, network capability)- Included Equipment: Extended version press brake, BendMaster 60, automated material handling/grippers, fencing and safety enclosuresTRUMPF BENDMASTER 60- Working Hours: 56,582 h (As of 14.05.2025)- Load Capacity: 60 kg (Sheet metal piece plus gripper)- Sheet Metal Capacity: Up to 40 kg- Supply Voltage: 400 V (3~ Phase)- Frequency: 50 Hz- Connected Load: 14 kVA- Control Voltage: 24 V- Max. Fuse Rating: 32 A- Manipulator Axis System: 6-axis backgauge sensor system- Floor Track: Ground track rail extended to 10 m- Control Unit: PC-based TRUMPF control with terminal (Monitor, mouse, keyboard)- Material Handling Features: Contour recognition sheet sensor, double sheet detection sensor, rotary union for rapid tool-less gripper exchange, gripper coupling on BendMaster- Included Vakuum/Gripping Gear: 3 modular vacuum grippers without separation unit, 1 mechanical tong gripper with rotary axis (including 3 sets of additional jaws)- Feeding Station: 1 sheet extraction station with linear axis- Peripheral Accessories: 1 gripper changing console (max. 4), 1 mobile fanning magnet, safety enclosure fence with access door Technical Specification Bending Length 4250 mm

Condition: ready for operation (used), TRUMPF 150 MQ VIS focusing optics SN:1277242-00769 + SN:1277243-00865, used, normal signs of use, 100% functional, scope of delivery as per photos. Bdjdpfxsz Adbzs Airoi

Condition: ready for operation (used), TRUMPF 200 MQ VIS focusing optic + Haas - Laser NBB 22-30-20-00 SN:9061842, used, normal signs of wear, 100% functional, delivery scope as shown in the photos. Bsdpfx Aoz Adb Ujirjdi

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 31,621 h, machine/vehicle number: A0221E1033, table length: 3,000 mm, table width: 1,500 mm, Power: 3000 W Work area size: 3000x1500 mm Further details can be found in the images, and it comes with a commissioning guarantee. Bedpfxozzyl Hs Airsdi

Condition: good (used), Year of construction: 2009, laser type: CO₂ laser, laser power: 3,200 W, X working area max.: 6500 mm Laser power: 3200 watts Control: SINUMERIK 840D Standard equipment: - Robust machine frame with integrated laser unit - CO2 laser TLF 2000, high-frequency excited, with cooling unit - Drives: Maintenance-free three-phase servo motors - Hl-LAS high-pressure cutting - Fast processing with SprintLas - Programmable cutting gas pressure adjustment - Laser cutting head with 5" lens, DIAS III - Quick-change device for cutting head - Laser power control - Laser logbook function - Automatic shut-off - Work area lighting - Control system SINUMERIK 840D: Open PC-based control, easy operation, diagnostic functions, maintenance logbook, technology data, teleservice, 3.5" floppy disk drive, RJ45 network connection - Safety: Multi-beam light barriers, fully enclosed and ventilated beam guidance, compact extractor, protective cabin Bsdpfxo Ahi Trs Airsdi - PRS 3001 unloading station with brush table - Chuck set D 20-85 mm Special equipment: + Upgraded to Laser TruFlow 3200 + SeamLine Tube + LoadMaster Tube 6.5 m, rear + Focus Line

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 15,000 h, control type: CNC control, degree of automation: automatic, controller manufacturer: Siemens, laser type: CO₂ laser, laser source manufacturer: Trumpf, laser hours: 15,342 h, laser power: 5,000 W, sheet thickness (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 12 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, feed rate X-axis: 100 m/min, feed rate Y-axis: 200 m/min, workpiece weight (max.): 1,000 kg, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, For sale here is a Trumpf Laser 3030 L20 CO2 laser cutting machine. The machine is fully functional and equipped with 2 cutting heads: Standard + Cool Line. The Lantek Expert Cut cutting software is included. Delivery/transport and dismantling are the responsibility and at the expense of the buyer. A cross conveyor and exchange table are included. Bdsdpfx Ae Aggb Reirji

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 28,025 h, machine/vehicle number: A0320A0086, laser type: CO₂ laser, laser source manufacturer: TRUMPF, laser hours: 6,496 h, laser power: 6,000 W, laser wavelength: 10,600 nm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 15,000 kg, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, TRUMPF TruLaser 7040 CO₂ laser cutting machine, year 2011. Equipped with 2 laser resonators, each with 6,000 W power, and 2 cutting heads. Technical data: Laser power: 2 x 6,000 W 2 CO₂ laser resonators 2 cutting heads Laser operating time: 28,025 h Beam operating time: 6,496 h Power supply: 400 V / 50 Hz Connected load: 130 kVA Machine weight: approx. 15,000 kg Bdsdpfx Aij Adzpperoi Machine No.: A0320A0086 The machine can be inspected while powered on in Poland. Additional information and photos are available upon request. Price: EUR 39,000 net, EXW Poland. Loading and transport to be agreed separately.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: A0220A1818, laser power: 3,200 W, overall weight: 11,700 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser power: 3,200 W MACHINE DETAILS Input voltage: 400 V Input frequency: 50 Hz Input current: 125 A Control voltage: 24 V Required fuse rating: 3 × 125 A Compressed air connection: 7–10 bar Nitrogen connection (N₂): 30 bar Oxygen connection (O₂): 20 bar Connected power: 73 kVA Dimensions & Weight Dimensions (L x W x H): 9,229 x 6,145 x 2,200 mm Total weight: 11,700 kg FEATURES CE marking Documentation / Manual Bdjdpfoz S Nmmox Airji Dust extraction Emergency stop switch Safety light curtain

Condition: defective spare-parts repository (used), Year of construction: 2009, For sale is a defective Trumpf 7036 tube bending machine, manufactured in 2009. The screen remains blue (blue screen error). Bjdoz Rknpspfx Airodi

Condition: used, functionality: fully functional, Year of construction: 2011, power: 18 kW (24.47 HP), input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, compressed air connection: 7 bar, We are offering this used TRUMPF TruMatic 3000 laser cutting machine, manufactured in 2011. Maximum cutting force: 165 kN Laser power: W Machine number: A0111A0021 Year of manufacture: 2011 Mains voltage: 400 V Mains frequency: 50 Hz Connected load: 18 kVA Control voltage: 24 V Required fuse rating: 3 × 35 A Compressed air connection: 7 ± 1 bar Nitrogen connection (N₂): 30 bar Oxygen connection (O₂): 20 bar Bdjdpo Aaxt Rsfx Airji If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, control type: CNC control, actuation type: hydraulic, controller model: Delem Touch, bending force (max.): 100 t, working width: 3,060 mm, stroke length: 100 mm, overall weight: 7,700 kg, total length: 3,600 mm, total width: 1,650 mm, total height: 2,400 mm, input voltage: 400 V, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, safety light barrier, upper tooling, Technical Data Manufacturer: Trumpf Type: TruBend 3100 – B26 Year of Manufacture: 2014 Capacity: 100 t Bending Length: 3060 mm Distance Between Uprights: 3384 mm Stroke Length: 200 mm Dimensions: approx. L 3.6 x W 1.65 x H 2.40 m Weight: 7.7 t Equipment - Controlled axes: X, X1, R, Z1, Z2 - Self-adjusting combined crowning system - Machine control: Multi-Touch Delem - Amada tool clamping system, top and bottom - Work area lighting - Laser-safe safety light curtain - Control panel with foot pedal - Large tool set All information is without guarantee. Bdjdpfxe Agck Ss Airoi A demonstration is possible at any time in our showroom.

Condition: good (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: L49/A0221E0510, TRUMPF TruLaser 3030 fiber + TruLaser 5030 – with 2 PalletMaster systems and a STOPA sheet metal storage system (49 slots) Complete, automated laser cutting system – preferably sold as a complete package. For sale is a comprehensive TRUMPF laser cutting system consisting of two laser cutting machines, each with a PalletMaster and connection to an automated STOPA sheet metal storage system. The system is particularly suitable for automated sheet metal processing and efficient material flow. 1) TRUMPF TruLaser 3030 fiber (L49) – 4 kW – Year of manufacture 2016 For sale is a TRUMPF TruLaser 3030 fiber (L49) with 4 kW laser power and extensive special equipment. The machine is in good condition. Technical data: Manufacturer: TRUMPF Model: TruLaser 3030 fiber (L49) Year of manufacture: 2016 Condition: Good Laser power: 4,000 watts (4 kW) Laser source: TRUMPF TruDisk 4001 Cutting area: 3,000 × 1,500 mm Control system: Siemens SINUMERIK 840D SL Drive system: Linear and torque direct drives Operation: 17-inch touch color display Equipment: BrightLine fiber Automatic pallet changer Automatic nozzle changer PierceLine FocusLine NitroLine PlasmaLine Bjdpfe Afpyfox Airodi FlyLine FastLine ContourLine AdjustLine ControlLine (automatic height control) Automatic nozzle cleaning Integrated camera Drop&Cut Electric roll-up roof Conveyor system Extraction and filter system Cooling system Automation and Software Automation interface for external loading and unloading systems TruTops Fab Integration TRUMPF TruTops Laser Network connection and USB interface 2) TRUMPF TruLaser 5030 (L52) – 6 kW CO₂ laser cutting system Technical data: Manufacturer: TRUMPF Model: TruLaser 5030 (L52) Year of manufacture: 2015 Laser: TruFlow 6000 CO₂ laser Laser power: 6,000 watts (6 kW) Working area: 3,000 × 1,500 mm Drive: Linear direct drives (gantry) Cutting head: Universal cutting head with 250 mm lens Control system: 17-inch touch color screen Automatic pallet changer Equipment and functions: BrightLine CoolLine PierceLine / FocusLine / NitroLine PlasmaLine / LensLine / ControlLine Smart Nozzle Automation (automatic nozzle changer) Smart Collision Prevention Automatic height control Cutting head lens with RFID chip Integrated cooling unit Longitudinal conveyor TruTops Laser software Other options available: Integrated camera systems Drop&Cut scrap material processing Automation interface PalletMaster connection TruTops Fab Integration 3. Automation – 2 × TRUMPF PalletMaster One PalletMaster per laser cutting machine 20 storage spaces each Modernization of PalletMaster and TKL by +profilsystems Connection to the STOPA storage system 4. STOPA sheet metal storage system Automated sheet metal storage system 49 storage spaces Connection to the laser cutting systems via the existing automation. Sale and Inspection The complete system, consisting of both TRUMPF laser cutting machines, the two PalletMaster systems and the STOPA storage system, is preferably sold as a whole. Individual sale is possible by agreement. Inspection by appointment. Price on request.