Used Trumpf Tas 500 for sale (408)

Condition: defective spare-parts repository (used), functionality: not functional, Punching machine. Metal punching machine, non-operational. Redpfxsx Tdcie Adbobt

Condition: ready for operation (used), Year of construction: 2015, operating hours: 61,469 h, controller manufacturer: TRUMPF, controller model: TASC 6000, This TRUBEND Cell 5000 with TruBend 5085 extended version (2720 mm x 850 kN) and BendMaster 60 was manufactured in 2015. World's first bending automation with image recognition for maximum flexibility. Sheet metal parts up to 40 kg, 6-axis backgauge sensor technology. Maximum repeat accuracy thanks to angle sensor technology (ACB) in automated operation. It features a stable all-steel frame, electro-hydraulic top drive, and a modern block hydraulic system. The control unit is a TRUMPF TASC 6000 with a 15-inch touchscreen and network capabilities. Ideal for precise bending operations, consider the opportunity to buy this TRUMPF TruBend Cell 500 press brake. Contact us for more information about this machine. • Machine: TruBend 5085 (2720 mm x 850 kN) with BendMaster 60 • Stable all-steel machine frame • Press beam with spherical bearing and tilt adjustment • Electro-hydraulic top drive with 4-cylinder technology • Generous edge clearance • Flat front covers • Modern block hydraulics • Electronic pressure balance • Measuring system with glass scale and spring compensation • Hydraulic oil in the machine (lifetime lubrication) • Oil cooler • Control cabinet cooling via air-to-air heat exchanger • Modern machine design • Stop/Backgauge • Stop system • Backgauge system: 2 axes (X and R) • Tool clamping • Upper tool holder, manual clamping, hardened • Lower tool holder, hydraulic clamping, hardened • Lower tool shift, 2 positions, pneumatic • Crowning • Manual crowning • Control • TRUMPF TASC 6000 • Graphical workshop programming • Windows XPe (embedded), Pentium 4, 2.8 GHz • 2 GB RAM • 15-inch touchscreen • Network-enabled • Teleservice via modem • Operation • Control panel with LCD keypad and foot switch • Communication rail • Safety • Standard safety devices • BendGuard safety device for upper tools up to 390 mm • CE marking Additional equipment • TRUMPF BendMaster automation (standard features) • Robot/Handling • Stable base and manipulator in die-cast aluminum • Load capacity 60 kg (workpiece plus gripper) • Low-profile welded floor track • Sheet metal sensor for contour detection • Rotary feedthrough for easy gripper change • Gripper coupling on the BendMaster • Sensors for 4-axis backgauge system • Electric drives • Double sheet detection • NC gripper transfer station • Vacuum generation for suction grippers Redpfx Asx Imqlsdbebt • Control • TRUMPF PC control with operator terminal • Teleservice via modem • Operation via screen, mouse, and keyboard • Safety • Safety fence with access doorWorld's first bending automation with image recognition for maximum flexibility Sheet metal parts up to 40 kg, 6-axis backgauge sensor technologyMaximum repeat accuracy thanks to angle sensor technology (ACB) in automated operationTruBend 5085 (2720 mm x 850 kN) with BendMaster 60

Year of construction: 2005, operating hours: 54,000 h, condition: used, pressure 50 t chamfer lenght 1250 mm distance between columns 1020 mm Stroke beam 215 mm 470 mm 300 mm Quick speed,inspeed 150 mm/sec bendingspeed 0-10 mm/sec opening speed 150 mm/sec Rodeppdpcopfx Adbebt X-axes 600 mm 200 mm Z1+Z2 axes controlled by cnc manuell,4 Anschlagfinger mm Number of working hours 54000 h Dimensions of machine: length 1600 mm width 1500 mm height 2300 mm weight 4900 kg Control Task total power requirement 9 kW dimensions of the machine ca. 2x2x2,5 m

Condition: ready for operation (used), Year of construction: 1998, total height: 2,300 mm, overall weight: 13,800 kg, product length (max.): 6,900 mm, This TRUMPF TRUMATIC 500 was manufactured in 1998. It features a maximum punching force of 220 kN and can handle sheet thicknesses up to 6 mm. The machine accommodates workpieces up to 150 kg, with a working range of 2500 mm on the X-axis and 1250 mm on the Y-axis. It requires a 400 V power supply and 6 bar of compressed air. Contact us for more information about this machine. • Maximum punching force: 220 kN (approx. 22 t) • Maximum sheet thickness (steel): 6 mm • Maximum punching diameter: 76.2 mm • Maximum workpiece weight: 150 kg • X-axis working range: 2500 mm without repositioning Rbjdpfx Ajx Uqzzsdbet • Y-axis working range: 1250 mm • X-axis speed: up to 90 m/min • Y-axis speed: up to 60 m/min • Stroke rate: up to 900 strokes/min in nibbling mode • Power supply: 400 V / 50 Hz, three-phase • Connected electrical load: approx. 19 kVA • Required compressed air pressure: 6 bar • Includes a large set of punches, dies, and tool holders • The machine is in working condition. Dimensions Machine Depth 6000 mm

Condition: ready for operation (used), Year of construction: 1997, Working area: 2500 x 1280 mm Punching force: 220 kN For sheet thickness up to: 8 mm Weight approx.: 11 t Rjdpfox Tr S Ssx Adbobt

Condition: ready for operation (used), functionality: fully functional, punching force: 22 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,270 mm, workpiece weight (max.): 150 kg, Punching and nibbling machine with TRUMALIFT Sheetmaster! TECHNICAL DETAILS Press force: 220 kN Max. sheet thickness: 6.4 mm Travel path X-axis: 2,500 mm Travel path Y-axis: 1,270 mm Positioning speed X-axis: 90 m/min Positioning speed Y-axis: 60 m/min Positioning speed simulation: 108 m/min Positioning speed rotary axis: 360°/sec Punching diameter: 76.2 mm Minimum programmable increment: 0.01 mm or 0.01° Workpiece weight: 150 kg Tool stations: 15 pcs Tool change time: 1.5 - 6.5 sec Redpfxex I Hh Ro Adbsbt MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,400 x 5,800 x 2,100 mm Machine weight: approx. 11,050 kg EQUIPMENT Multitool control "Softpunch" function Pneumatic follow-up cylinders Small parts sensor for programmable part chute Parts box for finished parts Chip conveyor with container Scratch-reduced processing Air-cushioned mounting Additional clamping bridge Prepared for TRUMALIFT SheetMaster TRUMALIFT Sheetmaster for workpieces up to 2,500 x 1,250 mm Alignment system for loading stack with spreader magnets Manually movable scrap grid system

Condition: good (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: 041613, Punching and nibbling machine TRUMPF Trumatic 500 Rodpfxox Td Edo Adbjbt Year of manufacture: 2000

Condition: ready for operation (used), Year of construction: 1998, operating hours: 30,430 h, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, punching diameter: 76 mm, TECHNICAL DETAILS Rjdjxhfu Hepfx Adbjbt Pressing force: 220 kN Maximum sheet thickness: 6.4 mm Punching diameter: 76.2 mm X-axis travel: 2,500 mm Y-axis travel: 1,250 mm Positioning speed X-axis: 90 m/min Positioning speed Y-axis: 60 m/min Positioning speed (simulation): 108 m/min Positioning speed rotary axis: 360 °/sec Workpiece weight: 150 kg Smallest programmable increment: 0.01 mm or 0.01° Tool stations: 15 units Tool change time: 1.5 - 6.5 sec MACHINE DETAILS Dimensions & Weight Dimensions: 6,400 x 5,800 x 2,100 mm Approx. machine weight: 11,050 kg Operating hours: 30,430 h

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,250 mm, punching diameter: 76 mm, TECHNICAL DETAILS Sheet thickness - max.: 6.4 mm Pressing force: 220 kN Workpiece weight: 150 kg Punching diameter: 76.2 mm X-axis travel: 2,000 mm Y-axis travel: 1,250 mm Positioning speeds Positioning speed X-axis: 90 m/min Positioning speed Y-axis: 60 m/min Rjdjwur Dqjpfx Adbjbt Simulation positioning speed: 108 m/min Positioning speed rotary axis: 360 °/s Smallest programmable path dimension: 0.01 mm or 0.01° Tools Tool stations: 15 tools Tool change time: 1.5 - 6.5 s MACHINE DETAILS Machine dimensions: 6,400 x 5,800 x 2,100 mm Machine weight: approx. 11,050 kg

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 3,085 mm, travel distance Y-axis: 1,650 mm, workpiece weight (max.): 230 kg, TECHNICAL DETAILS Cutting force: 220 kN Working area: 3,085 x 1,650 mm Max. sheet thickness: 8 mm Max. workpiece weight: 230 kg Control Control: Bosch Trumagraph CC 220 MACHINE DETAILS Machine weight: 13,800 kg Space required: approx. 7,900 x 6,300 x 2,200 mm Electrical specifications Mains connection: 400 V, 50 Hz Connection power: 19 kVA Redpfxowcqfpe Adbsbt Supply voltage: 400 V Control voltage: 24 V Required fuse: 3 x 35 A Compressed air Compressed air connection: 6 bar

Year of construction: 1994, condition: ready for operation (used), Working area: 3085x1650mm, max. punching force: 220kN, max. sheet thickness: 8mm, max. stroke rate: 750/min, max. workpiece weight: 230kg, max. punching diameter: 76mm, connected load: 19kVA, control: Bosch Trumagraph CC 20S, weight: 13.8t, operating hours: 84,400h, with storage interfaces for forward/backward storage, swing-back clamps, multitool control, air-suspended installation, chip conveyor with container, soft punch, thread forming and TrumaLift SheetMaster 1600 FMC, has been regularly serviced, on-site inspection is possible. Rodpfxjq Ewi Aj Adbebt

Condition: excellent (used), Year of construction: 2003, operating hours: 31,486 h, Medium format Rbodpfx Adoxl R I Tsbst Operating hours: 31,486 h Price on request

Condition: excellent (used), functionality: fully functional, We offer a highly productive 3D printer for industrial series production. The system was finally used with AISi10MG aluminum powder. The 3D printer has already been disassembled by the manufacturer. Disassembly and functional reports are available, proving that the machine was in operation prior to disassembly. All axes are properly secured. The machine can be transported on a standard truck. TruPrint 5000 G4 Serial number S0731C0008 Year of manufacture 08/2018 Laser runtime Laser 1 beam on: 5165 hours Laser 2 beam on: 5096 hours Laser 3 beam on: 5023 hours Trumpf TruPrint 5000 with the Powder Bed Monitoring and Melt Poll Monitoring options, including a filter system. Accessories: 2x build cylinders 3x Dosing cylinder 1 used overflow tank 1 new overflow tank Manuals 4 new heat exchangers 2 new Easy Filters Redpfx Adjvu Syysbjbt 3 new NTRON SIL02 Oxygen Analyzers + Sensors 1 new oxygen sensor and much more, such as seals, etc. The Armanni CAR.Elev. pallet truck for changing the tanks is also in stock and can be offered as an option. Get high-quality 3D components faster The highly productive, semi-automated TruPrint 5000 3D printing system prepares you for industrial series production. With features such as an optional 500°C preheater and full-field multi-laser configuration with three 500-watt TRUMPF fiber lasers, you are ideally equipped for the most demanding industrial applications. The machine produces high-quality components from a variety of metallic materials quickly and reliably, meeting the high quality standards in tool and mold making, including 3D printing on preform blanks, in the aerospace and medical technology industries. Optionally, the entire process chain can take place in a protective gas atmosphere: screening, printing, cooling, and depowdering. Combined with external parts and powder management and monitoring solutions from TRUMPF, it is ideal for industrial additive series production. Thanks to the Preform option, the TruPrint 5000 supports hybrid component production. The component structures to be additively manufactured are applied to a blank. This innovative option is particularly well-suited for easy handling in tool and mold making. TruPrint 5000 Build volume (cylinder) mm x mm Ø 300 x H 400 Ø 290 x H 390 (Reduction if preheating >200 °C) Processable materials[1] Weldable metals in powder form, such as: stainless steels, tool steels, aluminum, nickel-based, or titanium alloys Build-up rate[2] cm³/h 5 - 180 Layer thickness[3] μm 30 - 150 Max. laser power at the workpiece (TRUMPF fiber laser) W 3 x 500 Beam diameter[3] μm 100 - 500 Min. measurable oxygen content ppm Up to

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: B0508A0463, TRUMPF TruBend Cell 5000 – Robotic Bending Cell | Year 2015 Press brake: TruBend 5230 Robotic bending system: BendMaster Control system: TASC 6000 (robot and press brake programmed via the machine interface) Rbjdpsw Eilyjfx Adbet Press brake specifications: Pressing force: 230 tons Bending length: 4,250 mm Year of manufacture: 02.2015 Serial number: B0508A0463 Operating hours: Machine operating time: 33,789.3 h Hydraulic system: 8,528.8 h Press beam time: 1,119.9 h Description: Fully automated bending solution – the TruBend Cell 5000 is designed for high-volume, precision production. The integrated robot enables efficient bending with minimal operator intervention. Condition: Very good, regularly maintained Dismantling, loading, and transport can be arranged.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 11,000 h, controller model: Sinumerik 840D, laser power: 2,700 W, sheet thickness steel (max.): 6 mm, sheet thickness aluminum (max.): 4 mm, working length: 6,500 mm, TruLaser Tube 5000 with Special Equipment: Laser TruFlow 2700 & SeamLine Tube! TECHNICAL DETAILS Laser Power: 2,700 W Maximum Sheet Thickness (Steel): 6 mm Maximum Sheet Thickness (Aluminum): 4 mm Working Area: 6,500 mm Rbsdpfoyanr Tjx Adbet MACHINE DETAILS Laser Type: TruFlow 2700 Control System: Sinumerik 840D Laser Operating Hours: 11,000 h EQUIPMENT - Documentation / Manual - Safety light curtain - Sturdy machine frame with integrated laser unit - CO2 laser TruFlow 2000, high-frequency excited, with cooling unit - Maintenance-free three-phase servo motors - NitroLine high-pressure cutting - SprintLine for rapid processing - Programmable cutting gas pressure control - Laser cutting head with 5 lenses - Quick-change device for the cutting head - Laser power control - Laser logbook function - Automatic shutdown - Workspace illumination - Multi-beam light curtains - Fully enclosed and ventilated beam guidance - Compact dust extractor - Protective enclosure - PRS 3001 discharge station with brush table - Set of clamping jaws D 20–85 mm and D 85–150 mm - 1 set of V-shaped form shells and guide rollers for round tubes - 1 set of U-shaped form shells and guide rollers for a circumscribed diameter of 120 mm - SeamLine Tube

Condition: good (used), functionality: fully functional, Year of construction: 2006, laser power: 5,000 W, CNC Laser Cutting System TC L 3050 5000 Watt Redpfxjybaddj Adbjbt X Working area max.: 3000 mm Y Working area max.: 1500 mm Z Working area max.: 115 mm Control: Siemens Sinumerik 840D Laser power: 5000 Watt Operating hours: 72,846 h Laser on-time: 22,118 h Max. sheet thickness (mild steel): 25 mm Max. sheet thickness (stainless steel): 20 mm Max. sheet thickness (aluminum): 12 mm Standard equipment: - Hi-Las high-pressure cutting - Laser cutting head with 5'' lens - Laser cutting head with 7.5'' lens - Quick-change system for cutting head - Automatic sheet edge detection - PCS Process Control System - Positioning laser diode - Programmable assist gas selection/pressure adjustment - Microweld - PMS plasma sensor system - Sprintlas - Capacitive height control (DIAS III) - ContourLas - AutoLas Plus - Oil spraying device - Automatic pallet changer - Automatic nozzle cleaning - Work area lighting - Conveyor for small parts/scrap - Multi-chamber extraction - Compact dust extractor - Automatic shut-off - Safety features (light barriers) - ToPs 100 lite - RJ-45 network connection - 3.5'' floppy disk drive - Comprehensive operating manual - Raised platform design without steel frame - 9-inch cutting head - High-speed cutting head 3.75-inch - LoadMaster left-hand side

Condition: excellent (used), Year of construction: 2001, operating hours: 39,000 h, functionality: fully functional, + QuickSharp Rbodpfx Ajyc Nznodbet + Quickset

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, SheetMaster, GripMaster, ToolMaster from Trumatic TC 5000-1300 Redpfsx Tzvmsx Adbebt

Condition: used, Year of construction: 2015, Working hours laser on: 32824 h Working hours beam on: 28572 Laser power: 3000 kW Max. steel: 8 mm Max. stainless steel: 5 mm Max. aluminium: 6 mm Max. copper: 4 mm Max. brass: 4 mm Length: 18000 mm Width: 9000 mm Height: 2800 mm Machine weight: 21000 kg max. tube length: 6500 mm max. length finished parts: 4500 mm max. tube diameter: 152 / 170 mm min. tube diameter: 12 mm max. tube weight: 25 kg/m Standard configuration Machine: Stable machine frame Pipe support raw material with automatically retractable pipe supports Push-through chuck with self-centering parallel clamping rollers High-precision drives LoadMaster Tube 6.5m with bundle trough exclusion station parts tray Pipe support finished part with extendable guide rollers Scrap conveyor belt with bin Closed beam guidance via fiber optic cable (LLK) PierceLine NitroLine FocusLine Programmable cutting gas pressure automatic switch-off Ergonomic control panel with color touch screen Trump TruLaser: External solid-state laser TruDisk 3001 with 1 LLK outlet, diode-pumped disk laser with a wavelength of 1.03 nm Excitation via pump diodes laser power control Logbook function LAser cutting unit: universal cutting unit One cutting head strategy ControlLine control: Sinumerik 840 D SL easy handling Online help Integrated technology data Teleservice via the Internet Data transfer: Rodpfx Adjuqdg Tjbebt RJ45 network connector USB Security: CE marking multi-beam light barriers Monitoring system for gas pressure, temperature and cooling water Compact dedusting system Protective cabin with certified safety panes Extended machine accessories - Rapid Cut- Bevel cut technology package- Finished part length +1.5 m (to 4.5 m)- SeamLine Tube- Wireless Operation Point- Low-scratch version LoadMaster Tube 6.5 m- Tube diameter 15 mm Automation - LoadMaster Tube 6,5 m with bundle support

Year of construction: 2013, operating hours: 84,545 h, condition: ready for operation (used), General Data Machine weight 17500 kg Main Drive Punching force 220 kN Rsdpfx Adsx D Nwwjbobt This TRUMPF TRUPUNCH 5000 S10 was manufactured in 2013. It features a Siemens Sinumerik 840D control system, a working area of 3050x1550 mm, and a punching press of 220 kN. Capable of handling sheet weights up to 280 kg and thicknesses up to 8 mm, it includes a Linear ATC for 21 tools and additional options like MULTITOOL and ENGRAVING. Regularly maintained and in good condition. Contact us for more information about this machine. Application Types Punching

Condition: good (used), Year of construction: 2012, operating hours: 48,700 h, laser hours: 11,000 h, laser power: 2,700 W, sheet thickness steel (max.): 6 mm, sheet thickness aluminum (max.): 4 mm, working range: 6,500 mm, Equipment: documentation/manual, safety light barrier, Purchase options: Option 1: Installation, commissioning and partial overhaul and training of up to 3 operators at the buyer's premises with functional guarantee on acceptance. Surcharge, plus transportation and travel costs. Option 2: Workshop overhaul of the machine with commissioning and acceptance in accordance with the manufacturer's instructions at our factory. Installation, commissioning of the machine and training of up to 3 operators at the buyer's premises, free delivery of spare parts up to 6 months after commissioning. Surcharge, plus transportation and travel costs. Delivery time +8 weeks. After completion of the work, the machine can be inspected under production conditions, we look forward to your visit Standard equipment - Sturdy machine frame with integrated laser unit - TruFlow 2000 high-frequency excited CO2 laser, cooling unit - Drives: Maintenance-free three-phase servomotors - NitroLine high-pressure cutting - Fast processing with SprintLine - Programmable cutting gas pressure setting - Laser cutting head with 5'' lens - Cutting head quick-change device - Laser power control - Laser logbook function Rsdpfxsivaqij Adbsbt - Automatic switch-off - Work area lighting - Sinumerik 840D control system: Open control system based on PC, simple operation, online help, diagnostic function, maintenance logbook, technology data, teleservice, 3.5'' floppy disk drive, RJ45 network connection - Safety: Multi-beam light barriers, fully encapsulated and ventilated beam guidance, compact dust extractor, protective cabin - PRS 3001 ejection station with brush table - Set of clamping jaws D 20-85mm and D 85-150mm - 1 set of V-shaped molds and guide rollers for round pipes - 1 set of U-shaped forming shells and guide rollers with an enveloping circle diameter of 120mm Special equipment: + 2000 on Laser TruFlow 2700 + SeamLine Tube + LoadMaster Tube 6.5 m with bundle trough and plastic rollers + Discharge station 3m with belt table + Focus line + Additional tube support + finished part length + 1.5m

Condition: excellent (used), Year of construction: 2017, operating hours: 3,200 h, pressing force: 130 t, Space requirement: 11,500 mm x 10,000 mm + Increased installation height/lift + 230 mm + 4-axis backgauge system + Rear work area lighting + Front work area lighting - TruBend documentation Automation BendMaster (60) Standard equipment: BendMaster - Sturdy base frame and manipulator made of cast aluminum construction - Load capacity 60 kg, sheet plus gripper - Low-level floor track in welded construction - Sheet sensor for contour detection - Rotary feedthrough for quick gripper change Gripper coupling on the BendMaster - Sensor system for 4-axis backgauge system - Electric drives - Double sheet detection - NC regrip station - Vacuum generation for suction grippers Control - TRUMPF PC control with operator terminal - Teleservice via internet - Convenient operation: screen, mouse, keyboard Safety - Safety fence with access door Special equipment + Track extension to 10 m + Gripper change console + Modular vacuum gripper without separation (materials for 3 grippers) + Modular vacuum gripper with separation (materials for 3 grippers) + Clamp gripper with rotary axis + Sheet removal station with linear axis Redpfsxayl Dsx Adbebt + Additional pallet for sheet removal station + Right-hand side door for safety fence (or left-hand side in combination with ToolMaster) Machine - Robust machine frame entirely in steel construction - Press beam - Spherical mounting of pressure beam with inclined position - Electro-hydraulic upper drive system with 4-cylinder technology - Optical set-up and positioning assist with control valves - Generous free space for bending - Flat front covers - Block hydraulic system - Electronic pressure gauge - Measuring system with glass scale and spring-back compensation - Hydraulic oil in machine (lifetime lubrication) - Oil cooler - Electrical cabinet cooling via air-to-air heat exchanger - Modern machine design Backgauge System - 2-axis backgauge system, X and R axes Tool Clamping - Hydraulic upper tool clamping - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - CNC crowning Control - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock speed - 2 GB RAM - 15-inch touch screen - Network capability - Teleservice via internet Operation - Control panel with LCD keypad and foot switch - Communication rail - MobilControl Safety - Standard safety equipment - CE marking

Year of construction: 2008, condition: ready for operation (used), A CNC laser cutting system Trumpf including RotoLas and Liftmaster is available. Laser source: TruFlow 5000, laser type: CO2 laser, laser power: 5000W, travel X/Y/Z: 3000mm/1500mm/115mm, max. material thickness structural steel/stainless steel/aluminium: 25mm/25mm/15mm, positioning accuracy: +/-0.1mm, repeatability: +/-0.03mm, max. axis speed: 200m/min, max. simultaneous speed: 300m/min. Machine dimensions X/Y/Z: approx. 11100mm/4600mm/2400mm, weight: approx. 12000kg, operating hours: 55462h, laser hours: 24430h, beam hours: 12742h. Hours status as of 01/2026. Documentation available. On-site inspection is possible. Expected to be available from January 2027. Rodox Tumxjpfx Adbjbt

Condition: good (used), functionality: fully functional, Year of construction: 2011, laser power: 5,000 W, CNC Laser Cutting System TruLaser 5030 (L16) 5000 Watt X Working Area max.: 3000 mm Y Working Area max.: 1500 mm Z Working Area max.: 115 mm Control: Siemens Sinumerik 840D SL Laser Power: 5000 Watts Operating hours: 56,521 h Laser on time: 23,563 h Sheet thickness St. max.: 25 mm Sheet thickness Va. max.: 20 mm Sheet thickness Al. max.: 12 mm Standard equipment: - Enclosed machine frame with integrated laser unit - Motion unit for high-precision machining - Gantry drive in combination with linear direct drives - Enclosed beam guidance - Single cutting head strategy - Cooling unit KKW Riedel from 2003 - TFT color display - Longitudinal conveyor for small parts and waste - Automatic pallet changer - Work area lighting - Positioning laser diode - Oil spray device - Piercline Redpfx Aox Ap Sfjdbobt - FocusLine - NitroLine - PlasmaLine - CO2 laser TruFlow 5000 - Maintenance-free turbo radial blower - Cutting head with 250mm lens - Universal quick-change unit (UTI) with bus connection - ControlLine: Height control and sheet edge detection - SINUMERIK 840D - Automatic shutoff - ConturLine - FastLine - FlyLine - Microweld - USB interface - RJ-45 network connection - CE marking - Light barriers - Multi-chamber extraction system - Compact dedusting unit - High-speed cutting head 175mm focal length

Condition: ready for operation (used), Year of construction: 2001, operating hours: 62,769 h, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, TECHNICAL DETAILS Sheet thickness: 8 mm Punching force: 220 kN Travel X-axis: 3,000 mm Rbedex I E Ezspfx Adbjt Travel Y-axis: 1,500 mm MACHINE DETAILS Control: Siemens Machine weight: approx. 17,500 kg Operating hours: 62,769 h EQUIPMENT Scraper position change monitoring Thread forming Marking – quick beading Slitting Multishear Multibend Backgauge repositioning Roller tools Setup cassettes Ball transfer table