Used Trumpf Cn 901 for sale (393)

Condition: excellent (used), Large flanging device Make Trumpf Type CS 20 CN 20 Cjdsu Nuycepfx Afpopu (28202) suitable for Trumpf CS 20 and CN20 very good condition, very little used

Condition: ready for operation (used), Trumpf 19-01-11-11 Laser Module for Trumpf Laser HL1003D 11 with 11 and 11, used, in good condition, 100% functional, delivery contents as per photos. Cjdjx Eu Utopfx Afpjpu

Condition: ready for operation (used), Trumpf 19-01-11-11 Laser Module for Trumpf Laser HL1003D 11 with 11 and 11, used, in good condition, 100% functional, delivery contents as per photos. Cpodsx Dxqyspfx Afpju

Condition: ready for operation (used), Trumpf 19-01-11-11 laser module from Trumpf Laser HL1003D 11 with 11 and 11, used, in good condition, 100% functional, delivery as per photos. Csdjx Dxqtjpfx Afpepu

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 18,000 h, machine/vehicle number: A0215A0232, laser power: 2,500 W, sheet thickness (max.): 15 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, positioning accuracy: 0.1 mm, overall weight: 8,900 kg, TECHNICAL DETAILS X-axis travel: 3,000 mm Y-axis travel: 1,500 mm Laser power: 2,500 W Maximum sheet thickness (mild steel): 15 mm Maximum sheet thickness (stainless steel): 6 mm Maximum sheet thickness (aluminum): 5 mm Axis speed: max. 60 m/min Positioning accuracy: ±0.1 mm MACHINE DETAILS Dimensions & Weight Dimensions (L × W × H): approx. 7,400 × 3,300 × 2,300 mm Machine weight: 8,900 kg Mains connection: 400 V / 50 Hz Connected load: 65 kVA Control voltage: 24 V Required fuse protection: 3 × 100 A Compressed air connection: 7–14 bar Nitrogen connection (N₂): 29 bar Oxygen connection (O₂): 14 bar Operating hours: approx. 18,000 h EQUIPMENT Automatic pallet changer Cjdeyb Rzyepfx Afpjpu FocusLine laser technology NitroLine laser technology Maintenance-free AC servo drives

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, operating hours: 8,416 h, laser power: 3,200 W, sheet thickness steel (max.): 10 mm, sheet thickness aluminum (max.): 4 mm, pipe diameter (max.): 152 mm, working length: 6,500 mm, TRUMPF Tube Laser Cutting System with LoadMaster Tube 6.5 m and extensive additional equipment! TECHNICAL DETAILS Maximum tube diameter: 152 mm Maximum working length: 6,500 mm Material thickness (steel): 10 mm Material thickness (stainless steel): 5 mm Material thickness (aluminum): 4 mm Laser power: 3,200 W MACHINE DETAILS Control system: SIEMENS Sinumerik 840D SL Operating hours: 24,428 / 8,416 h EQUIPMENT - LoadMaster Tube 6.5 m with bundle magazine - Robust machine frame with integrated laser unit - Feed station with self-centering clamping jaws - Raw material tube support with automatically retractable pipe rests - Through-feed chuck with self-centering parallel clamping rollers - High-precision drives - Discharge station for finished workpieces up to 3 m in length - Tube support for finished parts with extendable guide rollers - Scrap conveyor with collection bin - Enclosed beam guide - NitroLine - FocusLine - Laser power control - Programmable cutting gas pressure - Automatic power on/off - Ergonomic control panel with touch color screen - Work area illumination - High-frequency excitation - Maintenance-free turbo radial blower - TASC 3 laser control - Laser logbook function - Cooling unit - Single cutting head strategy - Lens cutting head, 155 mm focal length - ControlLine Codpfx Afeygu Tkepepu - Simple operation - Online support - Diagnostic functions - Integrated technology data - Remote service via internet - RJ45 network interface and USB port - CE marking - Multi-beam light barriers - Monitoring system for gas pressure, temperature, and cooling water, among others - Compact dust extraction system - Protective enclosure with polycarbonate (Makrolon) panels - Jaw sets with clamping range 20–85 mm and 85–152 mm - Quick-change forming shells for round tubes up to 152 mm - Quick-change forming shells for rectangular tubes (up to a circumscribed circle of 85 mm) - Quick-change forming shells for rectangular tubes (up to a circumscribed circle of 170 mm) - Guide rollers for round and rectangular tubes - SeamLine Tube with inner seam detection - Adaptive clamping technology – feed station, small circumscribed circle - Adaptive clamping technology – feed station, large circumscribed circle - Adaptive clamping technology – through-feed chuck, small circumscribed circle - Adaptive clamping technology – through-feed chuck, large circumscribed circle Note: The machine will be dismantled on 02/03/2026 and can be inspected under power until then.

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 69,301 h, control type: CNC control, degree of automation: automatic, laser type: CO₂ laser, laser source manufacturer: Trumpf, laser source model: Truflow3200, laser hours: 41,349 h, laser power: 3,200 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 8 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, feed rate X-axis: 140 m/min, feed rate Y-axis: 140 m/min, repeat accuracy: 0.01 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: nozzle changer, Trumpf TruLaser 3030 (L20) Laser Cutting Machine Year of manufacture: 2013 Working area: 3000 × 1500 × 115 mm Rated laser power: 3,200 W Control system: Siemens Sinumerik 840 D SL Maximum sheet thickness: Steel (St): up to 20 mm Stainless steel (VA): up to 12 mm Aluminum (Al): up to 8 mm Maximum traverse speed: 140 m/min Positioning accuracy: 0.01 mm Dimensions: Length: 9,300 mm Csdpfxsxmpn Ue Afpepu Width: 4,600 mm Height: 2,200 mm Weight: 12,000 kg Equipment: Automatic nozzle changer, voltage stabilizers included

Condition: excellent (used), For sale: professional TRUMPF TruTool TKA 500 (1A1) plate edge beveller / chamfering machine. This machine is designed for making weld preparations and machining edges on steel plates. Condition: used, fully operational, normal signs of use visible in the photos. Industrial-grade equipment – made in Switzerland / Germany. Technical data: Power: 1400 W Supply voltage: 230 V / 50–60 Hz Current: 6.5 A Model: TruTool TKA 500 (1A1) Year of manufacture: 2009 Manufacturer: TRUMPF Cpsdpfx Afjyhnukjpou Applications: Bevelling plate edges before welding Chamfering for V and X weld joints Processing of structural and machine steel Workshops, fabrication, steel construction Scope of delivery: TRUMPF TruTool TKA 500 beveller Original TRUMPF transport case Manufacturer’s manual / documentation Accessories as shown in the photos The equipment is ready for operation. On-site inspection possible. Shipping or personal collection – to be arranged.

Condition: used, functionality: fully functional, Year of construction: 2005, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, pipe diameter (max.): 250 mm, pipe length (max.): 6,000 mm, power: 60 kW (81.58 HP), input voltage: 400 V, Equipment: cooling unit, emergency stop, For sale: TRUMPF TUBEMATIC Tube Laser Cutting Machine – Fully Equipped. The machine was used in industrial production and is in full working condition. Professionally dismantled and preserved in complete configuration. Scope of supply: - Bed and mechanical components - Electrical cabinets with original TRUMPF electronics - Drives, control units, power modules - Cooling system (chiller) - Cable tracks, sensors, wiring, etc. Machine technical specifications: X-axis travel: 6500 mm Y-axis travel: 200 mm Z-axis travel: 150 mm Workpiece sizes: Stock length * For manual loading: 141–6500 mm * For automatic loading: 3000–6500 mm Max. finished part length: 2000 mm Min. tube remnant length: 141 mm Wall thickness: 0.8–6.4 mm Round tube dimensions: Ø20–Ø150 mm Square profile dimensions: 20x20–120x120 mm Rectangular profile dimensions: 20x20 – max. oval Ø150 mm Workpiece weight: Max. workpiece weight: 120 kg Max. workpiece weight for unloading station: 40 kg Max. bundle weight: 4000 kg Speeds: X-axis: 100 m/min Y-axis: 40 m/min Z-axis: 40 m/min A-axis: 720 º/s Positioning accuracy1: Position deviation: ±0.2 mm Average range deviation: ±0.06 mm According to VDI / DGQ 3441, the measured length is 1 m. Processing accuracy depends on material type, its preprocessing, dimensions, and position in the working area. Control system: CNC TRUMPF – Siemens Sinumerik 840 D Total weight of the basic machine configuration: 15,460 kg Laser data: TRUMPF TLF CO₂ laser with high-frequency excitation – TLF 2000 Guaranteed max. laser power (programmable in 1% steps): 2000 W Pulse repetition rate: TEM00 Gas consumption: Laser gases *CO₂ – 1 l/h *N₂ – 6 l/h *He – 13 l/h Cutting gases *O₂ – depending on application *N₂ – depending on application Laser cooling: closed circuit Maximum power requirement for full system: 63 kW/h Cpsdpeyfnblofx Afpsu Pneumatic connection: 7–10 bar

Condition: used, Year of construction: 2010, Trumpf TruLaser 1030 – Laser Cutting Machine - B&R Automation PC 820 CNC Control - TruCoax 2500 Laser - Serviced annually by Trumpf (last service July 2025) - Year of manufacture: 2010 Technical Specifications: Working Area: - X-axis: 3078 mm - Y-axis: 1550 mm - Z-axis: 76 mm Maximum Material Thickness: - Mild steel: 16 mm - Stainless steel: 8 mm - Aluminium: 6 mm Speed: - Max. cutting speed: 40 m/min - Cutting acceleration: 2 m/s² - Positioning acceleration: 9 m/s² Accuracy: - Smallest programmable increment: 0.001 mm - Position deviation: ± 0.1 mm/m - Average positioning scatter: ± 0.03 mm Laser: - Max. laser power: 2500 W Cjdpfx Afeyghm Dspopu - Wavelength: 10.6 µm - Power stability: ± 2 % - Power distribution: TEM00 Compressed Air Consumption: - Standard cutting: 333 l/min - Air cutting: 500 l/min Electrical Data: - Drive type: maintenance-free three-phase motors - Connection: 65 kVA - Protection at 400 V: 100 A Dimensions & Weight: - Dimensions (W x H x D): 7396 x 2291 x 3287 mm - Total weight: 8850 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 7,790 h, controller model: B&R APC 910, laser power: 3,000 W, sheet thickness (max.): 20 mm, working length: 3,000 mm, working width: 1,500 mm, TECHNICAL DETAILS Table length: 3,000 mm Table width: 1,500 mm Laser power: 3,000 W Sheet thickness (steel): 20 mm Sheet thickness (stainless steel): 16 mm Sheet thickness (aluminium): 12 mm Travel speed: 100/140 m/min Accuracy: 0.1 mm MACHINE DETAILS Control: B&R APC 910 Connected load: 33 kVA Dimensions & Weight Space requirement: approx. 7,800 x 5,900 x 2,300 mm Machine weight: approx. 11,400 kg Controller power-on hours: 2,472 h Operating hours: 15,907 h Laser power-on hours: 7,790 h EQUIPMENT Integrated solid-state laser TruDisk 3001 with 1 fiber output Fully automatic pallet changer (with light barrier) Enclosed machine frame with integrated components Motion unit for high-precision processing Drives with maintenance-free three-phase servo motors Sheet support accessible from both sides Enclosed beam guidance via laser light cable (fiber optic cable) Cpedpfxsyhmxue Afpou Fully integrated chiller for laser and machine Integrated control cabinet Travelling fume extraction system Slag drawers 19" touch colour screen TruDisk power supply via machine Workspace lighting Positioning laser diode PierceLine FocusLine NitroLine Transport and installation device Copper cutting package (includes cutting data) Brass cutting package (includes cutting data) TRUMPF Laser Fiber optic cable as per standard layout (laser placed directly next to machine) Excitation via pump diodes Laser power control Laser logbook function Universal cutting unit Pierce head strategy Protective glass against lens contamination ControlLine: Height control and detection of sheet outer edge Simple drawing module Easy workshop programming Quick reproduction Integrated TRUMPF technology data Auto shut-off Programmable cutting gas/pressure selection ContourLine FastLine Microweld Tele-service via Internet Microjoint - handling at the control panel Adjustable dynamics Data transfer RJ45 network connection and USB interface CE mark Compact extraction unit Machine enclosure with certified viewing windows Motorised front door and rear access Enclosed machine roof

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 41,657 h, controller model: SINUMERIK 840 D SL, laser power: 5,000 W, working length: 3,000 mm, working width: 1,500 mm, TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Laser power: 5,000 W Current laser power: 5,335 W (as of 27/04/2023) MACHINE DETAILS Control system: SINUMERIK 840 D SL Power supply: TruDisk via the machine Solid-state laser: TruDisk 3001 with 1 fiber optic output Operating hours Operating hours: 67,508 h Laser on-time: 41,657 h EQUIPMENT Excitation via pump diodes Laser power control Automatic shut-off Torque drive in combination with linear direct drives Enclosed beam guide with fiber optic cable (LLK) Machine chiller unit (water-air) Integrated control cabinet lighting Automatic longitudinal pallet changer 17" touch color display Wide longitudinal conveyor belt Workspace lighting Positioning laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Copper cutting package (includes cutting data) Brass cutting package (includes cutting data) Universal cutting unit with fully adaptive lens system Piercing head strategy Protective glass against lens contamination Protective glass monitoring ControlLine: height control and sheet edge detection Simple workshop programming Advanced workshop programming Csdpfoyhmvtox Afpepu Fast re-run Integrated technology data Programmable cutting gas/pressure selection FastLine FlyLine AdjustLine Teleservice via internet Data transmission via USB interface RJ-45 network connection Safety with CE marking Light barriers Multi-chamber extraction system Compact extraction unit Machine enclosure with certified viewing window Right-hand door and electric roll-up roof

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, CNC punching machine with only approx. 11,600 operating hours, immediately available Manufacturer: TRUMPF Model: TruPunch 3000 - 1600(S11) Year of manufacture: 11/2013 Operating hours, approx.: only 11,600 h Sheet format: Large format TECHNICAL DATA: Working area: 3,000 x 1,500 mm, with repositioning Max. workpiece weight: 160 kg Punching and hold-down force: 180 kN and 20 kN Max. stroke rate: Punching: 800 1/min, Marking: 2,500 1/min Dimensions (L x W x H): 6,500 x 6,203 x 2,252 mm Cpjdpfsxn Tywsx Afpju SPECIAL EQUIPMENT: - MultiTool function - MultiShear function - Marking / Fast embossing function - Deburring and roller technology - Adaptive stroke calibration - Punch slug breakage monitoring - Lowerable die - Spray degreasing for dies with fill level monitoring - Additional clamp - Sheet collision detection - Stop pin, outer side, left position outside STANDARD EQUIPMENT: Machine: - Working area 3,000 x 1,500 mm (with repositioning) - Rigid C-frame for easy access - Coordinate guidance for high-precision machining - Linear magazine with 17 tool stations and 3 clamps - Drives with maintenance-free 3-phase servo motors - Repositioning device with programmable hold-down - Ball tables - Parts chute - Programmable support table - Good parts container - Scrap container - Automatic shut-off mechanism - Transport and installation device - Stop pin (right side, inside) - Foot switch for closing the clamps Punching head: - Servo-electric punching head - Rotatable single-tool adapter - Programmable hold-down - Tool length compensation - Spray degreasing for punch - Punch slug extraction - Forming - Manually adjustable pressing force - Stroke counter for punch - Monitoring of fill level for thread-cutting and tool lubrication Control: - Control system based on Bosch MTX CMP 70 - Operating panel with 17" touchscreen - NC program management - Integrated technology data - Teleservice via Internet - Integrated e-shop - Production planning - Programming - Advanced workshop programming - Data transmission - USB interface Safety: CE marking (ex works) Dual-beam light barriers

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2000, bending force (max.): 85 t, stroke length: 215 mm, throat depth: 410 mm, distance between stands: 1,750 mm, working length: 2,050 mm, TECHNICAL DETAILS Press force: 85 t Bending length: 2,050 mm Distance between uprights: 1,750 mm Stroke: 215 mm Cedpfx Asyhmdqefpepu Throat depth: 410 mm MACHINE DETAILS Control: DELEM Dimensions & Weight Machine dimensions: 2,700 x 2,100 x 2,400 mm Weight: 7,900 kg EQUIPMENT Two-hand operation 2 support arms Side safety doors Lasersafe Fissler Wila tool clamping Adjustable die position Crowning system Tool cabinet

Condition: good (used), functionality: fully functional, Year of construction: 2008, operating hours: 41,804 h, used TRUMPF TruMatic 6000 (K01) – Medium format Technical data: Year of manufacture: 2008 Last maintenance: 18.03.2025 Operating hours NC: 41804 Resonator hours: 14466 Beam ON hours: 2054 Y-Axis: 1300 mm Additional equipment: various tools Recently installed new parts: Csdowkd Efjpfx Afpspu Conversion to laser control TASC5 (01/2025) Control panel with display (01/2025) Box PC (01/2025) Hydraulic punching head/multilayer (10/2021)

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, Beam on: 24,314 h Cpodpsxfin Sjfx Afpeu Laser on: 55,176 h

Condition: ready for operation (used), Year of construction: 2012, operating hours: 33,318 h, controller manufacturer: TRUMPF, controller model: TASC 6000, number of axes: 5, overall weight: 8,300 kg, total width: 1,800 mm, total height: 2,840 mm, pressing force: 87 t, product length (max.): 3,020 mm, This 5s TRUMPF TruBend 5085 was manufactured in 2012. It features a press force of 850 kN and a bending length of 2,210 mm, making it suitable for various bending applications. With an operating interface of Touchpoint TruBend, it offers user-friendly operation. Consider the opportunity to buy this TRUMPF TruBend 5085 press brake. Contact us for further details. • Operating hours: Machine 33,318 h; Hydraulics 15,786 h • Clearance: 1,750 mm • Usable installation height: 385 mm (optional increased: 615 mm) • Throat depth: 420 mm • Operating interface: Touchpoint TruBend • Max. Y-axis speed (operating step, optional): 25 mm/s Technical Specification Cpodeyhp Edjpfx Afpju Bending Length 2210 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, Operating hours: approx. 68,000 hours Cpjdpfjygik Dex Afpju

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, ScheetMaster from a Trumpf Trumatic 6000-1600 line Year of manufacture: 2002 Cpjdpfjx Hx Itjx Afpou Runs very well

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, Top machine Cpodox Ifa Sopfx Afpeu

Condition: excellent (used), Year of construction: 2001, operating hours: 47,000 h, Large format Cpsdpfsxl R I Tex Afpsu Operating hours: 47,000 hours

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, Trumpf hydraulic press brake type V130, working width 3100 mm, max. press force 130 tonnes, Delem CNC control DA65, CNC-controlled Y1 Y2 X R Z1 and Z2, matrix shifting, CNC-controlled crowning. Cpedpsyhhhdsfx Afpou

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, laser power: 3,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, table length: 3,000 mm, table width: 1,500 mm, TRUMPF TruLaser 5030 3kW Fiber with LiftMaster! TECHNICAL DETAILS Table length: 3,000 mm Table width: 1,500 mm Cutting heads: 1 Sheet thickness (mild steel): 20 mm Sheet thickness (stainless steel): 15 mm Sheet thickness (aluminium): 15 mm Sheet thickness (copper): 4 mm Sheet thickness (brass): 3 mm Laser power: 3,000 W Codpjygw Rlofx Afpopu MACHINE DETAILS Control: CNC Dimensions & weight Space requirement: 9,300 x 4,700 x 2,200 mm Weight: 12,700 kg Electrical connection: 40 kVA / 80 A Electrical power consumption: 23 – 33 kW EQUIPMENT LiftMaster Automatic nozzle changer Extraction system Operating manual

Condition: ready for operation (used), controller manufacturer: Bosch, nominal power: 5.9 kW (8.02 HP), All tools indexing Full option machine!! Rotating tool adaptor Aut repositioning device with footpedal Programmable footpedal Auto toolchanger with 22 stations 3 plate clamps Programmable chute for parts 500 x 500 mm Container for workpieces Punch spray lubrification 2nd lubricant container Exhaust device Chip container Rapid shutdown of hydraulic system External control panel Graphic workshop programming Workshop programming SW package for PC Safety equipment RJ45 network connection options: - MultiTool - MultiShear - MultiBend - Deburring tool - Threadforming - Chipconveyor - Automatic closing of clamps Cpedpoyhib Sefx Afpju - Part trap detection sensor Nice selection of tools inlcuded + punch tool grinder Punching pressure: 180 kN Max sheet thickness by punching + nibbling: 6,4 mm Max weight workpiece: 230 kg Working range on cross-side (X-axes): 3000 mm Working range along (Y-axes): 1600 mm Positioning speed along X-axes: 90 m/min Positioning speed along Y-axes: 60 m/min Toolchanger: 22 tools Changingtime: 0,3 / 3 sec

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 15,907 h, Table length: 3000 mm Table width: 1500 mm Laser power in watts: 3000 Control unit: B&R APC 910 Connected load: 33 kVA Approx. machine weight: 7,800 kg Control unit ON counter: 2,472 h Operating hours: 15,907 h Laser ON counter: 32,927 h Laser ON: 7,790 h Special Edition Equipment - Integrated solid-state laser TruDisk 3001 with 1 LLK output - Fully automated pallet changer (with light barrier) Standard Machine Equipment - Enclosed machine frame with integrated components - Motion unit for ultra-precise machining - Drives with maintenance-free three-phase servo motors - Sheet support accessible from both sides - Enclosed beam guidance via laser light cable (LLK) - Fully integrated cooling unit for laser and machine - Integrated control cabinet - Accompanying extraction system - Slag drawers - 19" touch color display - Power supply TruDisk via machine - Work area lighting Cjdpoyffmxjfx Afpopu - Positioning laser diode - PierceLine - FocusLine - NitroLine - Transport and assembly device - Copper cutting kit (includes cutting data) - Brass cutting kit (includes cutting data) TRUMPF Laser - LLK as per standard layout (laser directly beside machine) - Excitation via pump diodes - Laser power control - Laser logbook function Cutting Head - Universal cutting unit - Single-head cutting strategy - Protective glass for lens protection - ControlLine: height regulation and detection of sheet metal edges Control System - Simple drawing module - Easy workshop programming - Fast repeat production - Control B&R APC 910 - Integrated TRUMPF technology data - Automatic shut-off - Programmable cutting gas/pressure selection - ContourLine - FastLine - Microweld - Teleservice via internet - Microjoint - operation via control panel - Adjustable dynamics Data Transfer - RJ45 network connection and USB interface Safety - CE marking - Compact dust extraction unit - Machine enclosure with certified viewing windows - Motorized front door and rear opening - Enclosed machine roof