Used Tube Press for sale (14,062)

Condition: like new (used), Year of construction: 2023, functionality: fully functional, 25-TAPE CORE WINDING MACHINE WITH MULTI-BLADE CUTTING SYSTEM Structural description: The 25-tape core winding machine for producing paper tubes consists of the following components: Cedpfx Ae Ah Ex Nsizjri Unwinder – made of shaped tubes protected with anti-corrosion powder coating. The unwinder has the ability to move on adjustable swivel wheels controlled from the operator panel. Cascade adhesive applicator with pneumatic brakes, scrapers, and adhesive heater, distinguished by the ability to adjust tape guiding, braking, and adhesive film thickness. Adhesive supply is controlled by a membrane pump, and the entire system is controlled by a computer managing the operation. Forming section – consists of a steel body protected with powder coating, inside which the control system is located, a swivel arm with drums driven by 3 roller gearboxes with a total power of 3 x 15 kW. The drive arm has a reading of the swivel angle and longitudinal position, as well as a pneumatic belt tensioning system. The body has a replaceable "cold" mandrel for forming the cores with a standardized socket, and a guide tube with a counter-knife. Multi-blade cutting system – the cutting system body is a separate part of the core winding machine. Linear guides for the movement of the cutting unit are mounted on the body. Inside the body, the following drives are mounted: - servo drive for driving the circular knives of the cutting system - servo drive with planetary gearbox for moving the cutting unit - servo drive for retracting the counter-knife - servo drive for lowering the knife bar with 5 cutting modules. Coil width from 50 to 120 mm Coil diameter Dz = Ø 76 mm, Dz. Max. 1500 mm Coil loading: Electric winch Min. max. internal diameter of cores 38 mm / 250 mm Cutting performance for cores: Ø 50 mm, L= 100 mm, thickness 8 mm 160 pcs./min. / 9,600 pcs./h, 67,200 pcs. / 7h Lease transfer.

Condition: good (used), Year of construction: 1982, functionality: fully functional, Hydraulic Try-Out Press (Four-Column Press) Pressing force: 3.000 kN Maximum slide stroke: 1,200 mm Table size: 2.600 x 1.300 mm Distance between columns: 2.050 mm (long side), 700 mm (short side) Maximum daylight (clamping surface to slide): 1.350 mm Minimum shut height: 250 mm Stroke speeds: Rapid traverse (downward): 140 mm/sec Rapid traverse (upward): 140 mm/sec Working speed: 16–50 mm/sec Operating pressure: 300 bar Power requirement: 55 kW Tank capacity: 1.200 l Codpfx Aie Ah Sk Iszeri Total weight: 55.000 kg Press height: 5.800 mm

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand colour production system, the “Xerox Versant 3100 Press”. Items for sale: 1 x Xerox Versant 3100 Press with the following specifications: Includes finisher A-GW04/A-GW07/A-FN13 Includes Xerox FreeFlow Print Server Includes paper deck A-CF03 Includes a stacking unit Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 3,638,436 pages Colour: Approx. 320,860 pages Black: Approx. 3,317,576 pages Condition: This is a second-hand machine, which may show signs of wear (minor scratches or yellowing). The machine has been tested to ensure it is in working order A test print can be seen in the photo Packaging and dispatch: You are welcome to view the machine during our business hours. Please arrange an appointment! Sturdy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you before dispatch or collection. Crsdpo Afupfofx Aizei For further information, you are of course welcome to contact us directly.

Condition: used, With this offer, you are purchasing a used manual transfer press ‘Lotus LTS 150 B from 2023’. Item for sale: 1 x Lotus LTS 150 B with the following equipment: Includes DTF gel oven Year of manufacture: 2023 Codpfx Aisx Eg Upszori Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Year of construction: 2010, condition: like new (used), functionality: unexamined, machine/vehicle number: TUBE-MATIC-1200-CNC-3376, Equipment: 3rd hydraulic function, Unused SAFOP,ITALY Make Heavy Duty Bevelling Machine Upto 1200 MM ,CNC,Siemens Control,available for Sale IN Southern PArt Of INDIA fore an very Attractive Price. Cedpfx Aszrkwnoizsri

Condition: used, total length: 1,300 mm, total height: 1,400 mm, total width: 800 mm, Year of manufacture: 2025 Colour: Blue Empty weight: 800 kg Price: On request Control: Teach-in Motor power: 4 kW Press force: 28 metric tons Maximum stroke: 180 mm Table: 300 × 550 mm - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: HB10011N2025006 - Operating hours: 0 - Power: 28ton - Stroke max: 180mm - Table length: 300mm - Table width: 550mm - Motor power: 4.0kW - Transport dimensions: 1300mm x 800mm x 1400mm (l x w x h) - Transport weight [kg]: 800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Crodpoztxnqefx Aizei VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, functionality: fully functional, This offer is for a used ‘Xerox Iridesse Production Press’ colour production system Items for sale: 1 x Xerox Iridesse Production Press with the following specifications: Includes Fiery Server EX-P6 Includes paper decks A-CF03 + A-CF04 Crsdpfx Ajzap Sboizoi Includes stacker Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 14,303,610 pages Colour: Approx. 14,006,634 pages Black: Approx. 296,976 pages Condition: This is a second-hand machine, which may show signs of use (minor scratches or discolouration). The machine has been tested for functionality A test print can be seen in the photo Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment! Sea-worthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 551198, paper width (min.): 400 mm, paper width (max.): 720 mm, paper height (min.): 480 mm, paper height (max.): 1,020 mm, Equipment: documentation/manual, ▪ Preset Plus feeder, ultrasonic + side-lay double-sheet detection ▪ AutoPlate Pro automatic plate changing ▪ Sheetfed Control (CAN-Bus), decentralised drive control ▪ Automatic blanket washing + Tandem Wash-up ▪ Prinect Press Center console, remote inking, Wallscreen ▪ Alcolor dampening, Alcolor Vario, IPA kit ▪ Sheet travel monitoring sensors ▪ CombiStar CANopen (temperature, alcohol, pH) ▪ Inpress Control ×2 with inline register correction ▪ Preset Plus delivery, direct-drive suction-belt sheet brake ▪ Remote-controlled oscillating rollers ▪ PowerStar AP 500 Duo + CleanStar Compact Csdpfxj Ahqlce Aizjri ▪ StaticStar Compact antistatic ▪ AirStar Pro, ScrollStar compressor, UPS

Condition: used, functionality: fully functional, With this offer, you are purchasing a used black-and-white production system, the “Minolta bizhub PRESS 2250P.” Items for sale: 1 x Minolta bizhub PRESS 2250P with the following features: Includes internal controller Includes LS-506/RU-510/PI-PFU finisher Includes paper deck Includes duplex ADF / R-ADF Cjdpfozl S Tqex Aizsri Not the right configuration? It’s no problem to customize the machine to your specifications. Feel free to contact us! Meter readings: Total: Approx. 7,836,379 pages Condition: This listing is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality A test printout can be seen in the photo Packaging and Shipping: You’re welcome to view the device during our business hours. Please schedule an appointment! Sea-worthy packaging and worldwide shipping are available upon request! Before shipping or pickup, we’ll record a video of a functionality test for you. For more information, you’re welcome to contact us directly.

Condition: used, total length: 1,200 mm, total width: 800 mm, total height: 1,800 mm, Year of manufacture: 2025 Colour: Blue Empty weight: 450 kg Price: On request Cedpsztxn Rsfx Aizeri - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: PB12093N2025005 - Operating hours: 0 - Drive system: Conventional - Vertical/Horizontal: Horizontal and vertical - Number of rolls [pcs.]: 3 - Power [kW]: 1.5 - Shaft diameter [mm]: 50 - Top roll diameter [mm]: 155 - Bottom roll diameter [mm]: 155 - Bending speed [mm/min]: 11 - Capacity diameter round [mm]: 50 - Options: Digital readout - Transport dimensions: 1200mm x 800mm x 1800mm (l x w x h) - Transport weight [kg]: 450kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Press Machine type: Eccentric press Manufacturer: EBU Model: H50F Serial number: P5318482 Rated force: 500 kN Stroke adjustment: 8–120 mm Ram adjustment: 70 mm Stroke rate: 115 min⁻¹ Table Table dimensions: 650 × 520 mm Hole diameter: approx. 120 mm MACHINE DETAILS Drive Motor power: 3 kW Dimensions and weight Crsdpj Ad Ifdofx Aizoi Length: 1,500 mm Width: 800 mm Height: 2,400 mm Weight: 3,000 kg EQUIPMENT Guards for the flywheel are available.

Condition: ready for operation (used), Year of construction: 1980, Höfer H65S heating plate press Disassemblable design Heating power with energy-saving mode: 7.8 kW, normal: 15.6 kW Pressing area: 2500 x 1300 mm Operating pressure: max. 65 tons Credpfx As Ahyycjizji 4 cylinders Space requirement: 2890 x 1460 x 1650 mm Year of manufacture: 1980

Condition: excellent (used), Year of construction: 2022, operating hours: 1,500 h, functionality: fully functional, Channel baling press Paal Pacomat III-50D, year of manufacture 2022, very good condition Technical data: Manufacturer Kadant Paal Type Pacomat III-50D Year of manufacture 2022 Operating hours approx. 1500 Pressing force 50 t Connected power 24 kW Feed opening 1250 x 1020 mm Bale dimensions 750 x 1100 mm, length variable Tying 4-way automatic Throughput at Codj Ah Rikopfx Aizsri 35 kg/m³ approx. 6.4 t/h 60 kg/m³ approx. 8.6 t/h 80 kg/m³ approx. 12.7 t/h Bale weight up to 650 kg Transport dimensions approx. 8172 x 2030 x 2500 mm (LxWxH) Machine weight approx. 12000 kg Materials: paper, cardboard, film The press is still in use until the beginning of December and can be inspected while in operation. The condition is very good. It has only been used for paper/punching waste. The complete operating manual including electrical/hydraulic wiring diagram and CE declaration is available. The conveyor belt shown in the pictures is not included in the scope of supply. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any guarantee.

Condition: excellent (used), Year of construction: 2010, Laminated wood press LHP 14 Year of manufacture: 2010 Working length: 7600 mm Crsdpfx Aezx Sbbsizji Working width: 240 mm Working height: 800 mm

Condition: used, Year of construction: 1968, power: 14 kW (19.03 HP), input voltage: 380 V, type of input current: three-phase, Prasa półkowa OTT JU 60-S niemieckiej produkcji, przeznaczona do prasowania i klejenia płaskich elementów stolarskich oraz oklejania płyt fornirem. Maszyna sprawdzi się przy produkcji elementów meblowych, frontów, drzwi oraz płyt warstwowych. Podgrzewane płyty umożliwiają prowadzenie procesu klejenia na gorąco, przy zastosowaniu odpowiednio dobranego kleju. Masywna stalowa rama oraz hydrauliczny docisk zapewniają stabilną konstrukcję. Dolna płyta robocza jest podnoszona, a mechanizm zębatkowy synchronizuje jej ruch. DANE TECHNICZNE: – producent: Paul Ott KG, – model: JU 60-S, – kraj produkcji: Niemcy, – rok produkcji: 1968, – numer fabryczny: 4792, – typ: prasa hydrauliczna półkowa z ogrzewaniem elektrycznym, – liczba półek roboczych: 1, – liczba płyt prasujących: 2, – napięcie silnika według tabliczki: 380 V, – prędkość obrotowa silnika według tabliczki: 1400 obr./min, – napięcie zasilania ogrzewania: 380 V, – moc ogrzewania: 14 kW. WYPOSAŻENIE I KONSTRUKCJA: – hydrauliczny układ docisku, – podgrzewane płyty prasujące, – ruchoma dolna płyta, – mechanizm synchronizacji ruchu stołu z listwami zębatymi, – panel sterowania umieszczony z przodu maszyny, Cjdpfo Ahg Hksx Aizjri – analogowe wskaźniki i pokrętła regulacyjne, – wyłącznik główny, – masywna stalowa konstrukcja ramowa, – otwarty dostęp do przestrzeni roboczej. ZASTOSOWANIE: – fornirowanie płyt meblowych, – klejenie płaskich elementów stolarskich, – prasowanie elementów warstwowych, – produkcja frontów, drzwi i elementów meblowych. Wystawiamy fakturę VAT. Możliwość organizacji transportu za dodatkową opłatą. Zapraszam do przetestowania maszyny. Gdzie obejrzysz nasze maszyny? JBS MASZYNY STOLARSKIE WOLICA DRUGA 26 23-310 MODLIBORZYCE

Condition: good (used), Year of construction: 2021, operating hours: 423 h, functionality: fully functional, Vertical baling press HSM V-Press 860 plus, year of manufacture 2021 Technical data: Manufacturer: HSM Type: V-Press 860 plus Year of manufacture: 2021 Operating hours: 423 Pressing force: 60 t Drive power: 4 kW Crjdpfo Ah R Nbex Aizoi Feed opening: 1195 x 645 mm Feed height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Tying: manual Theoretical cycle time in idle mode: 25 s Theoretical pressing capacity: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: Film, paper, cardboard Note: The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by appointment. The sale is ex works, without warranty. Our payment terms are 100% prepayment.

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand colour production system, the “Xerox Versant 180 Press” Items for sale: 1 x Xerox Versant 180 Press with the following specifications: incl. Fiery NX Pro-01 Includes A-CF01 paper deck Includes A-GW03/A-FN13 finisher Includes duplex ADF / R-ADF Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 1,096,427 Black: Approx. 661,731 Colour: Approx. 434,696 Condition: Codszxwypspfx Aizori This is a second-hand machine, which may show signs of wear (minor scratches or discolouration). The machine has been tested for functionality A test print can be seen in the photo Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, Year of construction: 2022, The lot consists of: PET bottle granulator ZERMA GSH-800; AMIS; S/N GSH 800/1200-S7-3 #11783 (2022); 132 kW; rotor 800 x 1,200 mm; 10,400 kg; approx. 1 t/h with 12 mm screen Csdpfe Ahhm Ujx Aizjri (technical details available for download as a PDF in "Essential information") Friction cleaner FR 800-2000; R&K; S/N 100009/2014; friction cleaning unit Turbo Washer HW 83E - unit 1; STF; Approx. 2,026 x 1,480 x 2,472 mm; 22 kW; 1,760 rpm; 400 V Turbo Washer HW 83E - unit 2; STF; S/N hw8e14/01; 2014; Approx. 2,026 x 1,480 x 2,472 mm; 22 kW; 1,760 rpm; 400 V Friction cleaner FR 800-2000 - multiple units; STF / R&K; Approx. 2,700 x 2,000 x 2,200 mm; 2,400 kg; rotor 800 x 1,800 mm; 87 mixing elements Flotation tank - multiple units; R&K; Approx. 13 m3 capacity; conveyors, motors and mixing drums Inverting screw conveyors - multiple units; R&K; 2.2 kW; 400 V Blowers TRL 40/75 - multiple units; Kongskilde; 5.5 kW; 400 V; 50 Hz Cyclones - multiple units; Kongskilde; auxiliary air separation equipment Magnetic trap MSV 200/7; Magsy; S/N 1259; 2022; 200 mm inlet/outlet; neodymium magnets; approx. 5.2 kg Zig-zag separator with two TR

Condition: ready for operation (used), Year of construction: 1968, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL DATA Manufacturer: Exner Crsds Adu Uljpfx Aizoi Type: HA SP-340 SS Year of manufacture: 1968 Machine number: 1 PRESS DATA Press force: approx. 34 t Table dimensions: 1,000 × 800 mm MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 2,000 mm Width: 2,000 mm Height: 3,200 mm Weight: 8,000 kg

Condition: ready for operation (used), Year of construction: 2003, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 000163, color channels: CMYK, paper weight (min.): 45 g/m², paper weight (max.): 80 g/m², total length: 16,000 mm, total width: 3,500 mm, total height: 4,500 mm, space requirement length: 20,000 mm, space requirement width: 6,000 mm, space requirement height: 6,000 mm, year of last overhaul: 2020, type of input current: three-phase, input voltage: 380 V, cutting length (max.): 630 mm, section length (max.): 1,000 mm, Equipment: documentation/manual, kitap,jurnal,gazet çap enjam.Sagatda nominal25000 şertli önüm.(maksimal 35000 çenli)tizlik.wertikal gurnama çap guraly 4+4CMYK. Jf35 epleýjili,63sm kesiji,üç görnüş epleýiş,doly işjeñ ýagdaýda.Rulon oturtma iki rulonly.4+4 CMYK Cedpfxsz A Uz Ae Aizeri

Condition: ready for operation (used), Year of construction: 2004, Pack press Signode with plastic strapping Codpszca Uxefx Aizori

Condition: excellent (used), Year of construction: 1965, functionality: fully functional, press force: max. 630 to. daylight: 320 mm width: 420 mm stroke: max. 310 mm Crjdpfx Asyylhajizji weight: 3.700 Kg.

Condition: ready for operation (used), Year of construction: 1964, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Press Clamping force: 68.6 kN Table Table dimensions: 600 × 600 mm Number of slots: 4 Electrical data Operating voltage: 380 V Connected load: 4 kW Power: 1 kW MACHINE DETAILS Manufacturer: Reis Type: 60A/7H Machine number: 48/64 Year of manufacture: 1964 Machine type: Embossing press Dimensions and weight Credpfe Advcdjx Aizji Length: 1,500 mm Width: 1,300 mm Height: 3,000 mm Weight: 3,000 kg EQUIPMENT 4 slots in the table

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between December 1, 2026, and December 10, 2026! Csdpfx Aie Achxbezsri TECHNICAL DETAILS General Information Machine type: Single-column eccentric press Machine weight: approx. 5.5 t Performance Data Pressure: 63 t Stroke rate: 120 strokes/min Stroke and Working Data Overhang: 250 mm Stroke: 8–100 mm Installation height: 330 mm Ram adjustment: 63 mm Table and Clamping Surfaces Table: 715 × 500 mm Clamping plate: 700 × 480 mm Through-hole in the table: 240 mm Through-hole in the clamping plate: 110 mm Ram clamping surface: 450 × 280 mm Tilting Design Tilting stages: 4 Through-hole to the rear: 325 × 500 mm Through-hole downwards: 360 × 160 mm Additional Clamping Plate Dimensions: 700 × 480 × 850 mm Dimensions Space requirement: approx. 1.2 × 1.7 × 2.7 m EQUIPMENT Hydraulic adjustment system for tilting the press Central lubrication via hand pump Additional clamping plate Two-hand operation Foot pedal release can be configured Operating mode selector switch for setup, continuous stroke, and single stroke Emergency stop switch Part counter Various accessories

Condition: excellent (used), functionality: fully functional, Year of construction: 1995, Baykal hydraulic press brake, type APH 3110x180 working width 3100 mm Cedj Ah Hhmepfx Aizori max. pressing force 180 tons digital display for back gauge includes a set of tools available mid-December 2026