Used Tumble for sale (123)

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Depositor for hot products, will connect to a cooking vessel and pump it into bags with set a weight which is adjustable Air operated clipper to seal the bag Finished clipped bags can go into a tumble chiller to cool down. The machine is in good working order and ready for delivery Rodpfx Aajxgutpjhech Single phase electric 240 volts 50 Hz It needs an air supply

Condition: used, total length: 1,100 mm, total width: 900 mm, total height: 1,950 mm, This used, mobile stainless steel filling hopper is ideal for efficient filling of production plants in the meat processing industry. It is mobile and can be used flexibly. It was previously used as a product chute on a Henneken 8000-litre tumbler. Rsdsv Eq U Djpfx Aahsch

Condition: used, functionality: fully functional, Tumbler with cooling system Manufacturer: Gunther Model: GPA 500K Made of stainless steel Dimensions: 2200 x 1650 x 2550mm Volume: 500 liters Electric power: 3.5kW Rcodpowd I E Asfx Aaheh

Condition: like new (used), Vacuum tumbler 220 liters Tour: MKR 220 Container capacity: 220 l Maximum filling quantity: 145 l Automatic unloading Vacuum: 0 - 95 % Integrated cooling system Refrigerant R 404 Rcodpju Ndrzofx Aahjh Computer control of working process Machine dimensions W x H x D: 1657 x 2447 x 2144 mm Installed power: 3,0 kW Voltage: 400 V, 50 Hz

Condition: good (used), functionality: fully functional, Set of spare parts for CAZENEUVE HB 725 lathe. Includes: * Steady rest diameter: 320 mm: EUR 1,500 (excl. VAT) Redpjw Anb Iefx Aahjch * Complete gearbox: EUR 1,800 (excl. VAT) * Tumbler gears (LIRE): EUR 350 (excl. VAT) * Tailstock handles: EUR 150 (excl. VAT) * Chip tray (for HB725x1000 mm): EUR 800 * Faceplate dia: 520 mm: EUR 400 (excl. VAT) * Aluminium handwheel for longitudinal carriage: EUR 200 (excl. VAT) * Compound rest: EUR 500 (excl. VAT) * Square toolpost: EUR 390 (excl. VAT) * Set of sheet metal covers: EUR 400 (excl. VAT) * Tailstock MT5: EUR 80 (excl. VAT) * HB725 nameplate: EUR 100 (excl. VAT) * V-belts HB725 (all 8): EUR 150 (excl. VAT) * Cross slide stop: EUR 120 (excl. VAT) * Belt guards: EUR 190 (excl. VAT) More pictures upon request. Shipping available at extra cost.

Condition: used, Year of construction: 1983, useable stroke 30 mm rivet shank max max. Ø 6 mm throat 130 mm spindle turning speed range 1400 U/min quill stroke 45 mm table surface area 284 x 235 mm Roll riveting machine with safety device for low-noise rolling riveting of all types of rivet heads. The rivet stopper is mounted at an angle in the roll rivet head on roller bearings so that it can tumble freely regardless of the rotation of the head. Fast and powerful movement of the roller rivet head thanks to a directly pressurized compressed air cylinder. Force requirements can be adjusted steplessly. Manual availbale Rcsdpsrp Im Rofx Aahsh

Condition: ready for operation (used), Year of construction: 2007, Professional ITEC meat bins tipper, type 27100. The device is designed for a power supply of 3x 400 V, 50 Hz, with a power rating of 0.75 kW. Its compact dimensions make it ideal for use in food processing plants, especially where precision and reliability are important. Often used with vacuum tumblers. Dimensions: Width: 190 mm Depth: 130 mm Height (tipper lowered): 145 mm Height (tipper raised): 235 mm Total height with tipper raised: 250 mm The robust construction and proven technology of the Danish manufacturer guarantee a long service life and safe operation. The device is ideal for use with transport and loading systems in the meat, fish, and vegetable industries. Rcjdpfewit N Rsx Aahjh

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, GAROS MDF 5600K ID.NO. 2689 Garos MDF 5600K Vacuum tumbler / Massage tumbler with cooling function. Capacity 5600 liters built-in vacuum pump & associated filling funnel included. Dimensions 520 x 210 cm Height 280 cm. Rcedpfxerzqzuj Aahjh

Condition: used, Tumbler Iglu Scheid with cooling Volume: 250 liters Dimensions: 140x120x195cm Electrical power: 6.5kW/13kW Rcjdpfen Nw R Rox Aahoh

Condition: ready for operation (used), functionality: fully functional, The Lutetia T5 1995 Vacuum Tumbler is a high-performance industrial machine, engineered for meat and food processing plants. With its large capacity, it efficiently handles significant volumes while ensuring optimal homogeneity in blending operations. It fully meets the requirements of businesses looking for productivity, quality, and reliability. Additionally, this vacuum tumbler provides precise processing for meat with or without brine. The vacuum mixing process enables better marinade penetration and enhances the final product texture. Moreover, it reduces yield losses while optimizing preparation times. Operators benefit from a robust machine suitable for high-throughput production lines and the demands of modern manufacturing. The Lutetia Type 5 features a combination of versatility and durability. Its stainless steel construction and rotating drum system deliver excellent wear resistance and simplified maintenance. Its footprint is also suitable for demanding industrial layouts. Thanks to its outstanding performance, it is a strategic choice for workshops aiming to modernize their machinery while controlling costs. Europ'Equipement offers this second-hand tumbler, reconditioned and tested by our technicians. You benefit from a reliable machine, restored to operational condition and compliant with industrial standards. Contact us today for more information on this equipment and to request a customized quotation. Technical specifications: Capacity: 3,600 to 4,000 kg Effective volume: 6,750 L Empty weight: 3,000 kg Overall length (A): 3,500 mm Length without cover (B): 3,200 mm Drum length (C): 2,550 mm Width (D): 2,050 mm Diameter with reinforcement (E): 1,950 mm Overall height (F, AP and SP): 2,450 mm Shaft height (G): 1,515 mm Loading height (H): 1,238 mm Height below discharge chute (I): 1,170 mm Rcodpfx Aaew I R E Eehsh

Condition: good (used), Year of construction: 1979, Round vibrator, vibratory grinding system, vibratory grinding machine, vibratory grinding round vibrator, tumbling system, continuous vibrator, vibration conveyor, oscillating conveyor, conveyor trough, spiral conveyor -Manufacturer: OSRO, round vibrator type OS10 -Working container: elastically mounted -Total volume: 600 liters -Outer diameter: 1430 mm -Work basin width: 320 mm -Work basin height: 545 mm -Machine for: deburring, polishing, rounding edges -Dimensions: 1570/1430/H1140 mm -Total weight: 1140 kg Redpfx Aoiqpyusahoch

Condition: used, Year of construction: 2016, Working hours machine: 5320 h max. working width: 300 mm workable material thickness: 1-15 mm Rcsdev N I Hlepfx Aahjh Tension: 400V / 50 Hz Total power: 13,5 A Total current consumption: 7,5 kW Insulation class: IP42 Infinitely variable feed speed: 0-2 m / min Length: 2600 mm Width: 2300 mm Height: 1300 mm Machine weight: 1900 kg Standard configuration - With a magnetic table designed for part dimensions of 25 x 25 x 1 mm up to maximum 200 x 200 x15 mm (geometry-dependent)- With vacuum table for part dimensions of 45 x 45 x 1 mm up to maximum 200 x 200 x15 mm (geometry-dependent)- Time consuming turn-over of parts with a second pass is not necessary- Swinging away of the innovative turning station makes it possible to deburr parts longer than 200 mm- A higher level of automation ensures an economic and reliable deburring process, also for large quantities of parts- A high and sustainable deburring quality.- Dry deburring process (no chemical additives as used in tumblers)- Small parts are returned to the front of the machine and gathered in a box. No extra walking back and forth for the operator.- Energy-efficient- The deburring process ensures an even wear of the belt and brushes across the entire width of the machine- Fast and simple tool Change- Simple and intuitive operation of the machine- Modern, compact machine design Extended machine accessories

Condition: good (used), WSM Stationary Screwdriving Unit Screwdriving Station Assembly of parts for car radios and navigation systems and for testing them. The assembly station is surrounded by a protective enclosure. The service doors are equipped with monitoring switches with tumbler(interlock). The doors are locked in automatic mode and can only be opened in automatic mode or in manual mode after pressing the Doors button on the control panel. Automatic mode cannot be started when the door is open. Function sequence The station is loaded with the pre-assembled module via the transfer conveyor. The operating steps of the automatic station with the passage of a WT are described below. In normal operation, all 3 stations work in parallel. - Positioning of the WT with the preassembled assembly in St.2.1 - Lowering of the beam with the scanners and the vision sensor - Scanning of the 3 codes (front panel, front LP, SD LP), comparison with the database - Checking the correct latching of the FFC in the connector - Lifting the carrier and lowering the WT onto the belt - Positioning of the WT with the pre-assembled assembly in St.2.2 - Positioning of the screwdriver and screwing of the front LP Rcedpfxeibichs Aahsh - Lowering the WT onto the belt - Positioning of the WT with the pre-assembled assembly in pc.2.3 - Lowering of the light protection cover and contacting, positioning of the carrier with the test sensors from below - type-dependent testing of the SD + CD lighting slots and pushbuttons - Function test CD eject button - Lowering the WT onto the conveyor > continue If faults occur during the test, they are indicated on the display and can be rectified if possible. To do this, switch to manual mode and open the doors. After the repair and starting of the automatic system, the WT is tested again in the station. If no repair is possible (e.g. screw fault), the WT is marked as NOK in the control system and is not processed further. Manual NOK marking and ejection is also possible.

Condition: excellent (used), functionality: fully functional, A complete concrete block plant is offered, Manufacturer: Henke: 6 Henke rotary table presses, 1 complete mixing plant with spare mixer Zyklos 1500/1000, 1 dosing unit, 1 tumbling machine, 3 stone splitting machines, 1 packaging unit, 140 linear meters of roller conveyors, 1 overhead crane, 13 silos, 1 bucket elevator. Fully operational. Rcsdowzak Eepfx Aahoh

Condition: good (used), Tumble rubber belt blast machine Max. batch volume: 125 L Max. batch weight: 300 kg Max. component weight: 10 kg Compartment diameter: 700 mm Compartment width: 875 mm Nr. Of turbines: 1 Rsdpfjvpgr Tox Aahjch Power of turbine: 5,5 kW Max. turbine flow: 75 kg/min Cleaner type: air Foundation: no Housing protection: Mn + rubber Filtering unit: YES 2.000 m3/h Max. installed power: app. 11,5 kW

Condition: new, Year of construction: 2025, Injector gravitational tumble belt blasting system for blasting series parts with glass beads, corundum, ceramic balls, etc. Due to the gravitational system, the system has 15-20% more blasting power than a simple injector blasting system. The system has a bucket elevator with wind sifting for cleaning the blasting agent. It is possible to store up to 20 programs for various blasting tasks. Rsdehunz Nopfx Aahech

Condition: used, Cylindrical vibrator, tumbling facility, mass finishing machine, tumbling finishing cylindrical vibrator, tumbling facility, continuous vibrator, vibration conveyor, oscillating conveyor, conveyor trough, spiral conveyor -Working container: elastically mounted -Total volume: 60 liters -Outer diameter: 730mm -Working basin width: 250 mm -Working basin height: 250 mm -stretched container length: 1500 mm -Machine for: deburring, polishing, rounding edges -Dimensions: 800/800/H1150 mm Rcjdpfxsimttvs Aahsh -Weight: 460kg

Condition: refurbished (used), Complete cheese grating line for cheddar or Mozzarella cheese blocks. Cheese blocks are cubed and fed to the Cheese grater then up a conveyor dosed with powder and tumbled Arcall Cheese cutter, transfer conveyor, Urschel CC grater, incline conveyor and tumble mixing drum Can produce 1,000 Kg of grated cheese per hour. Redpfx Asp T Tghjahjch A Weigh bagging system can be added to the grated cheese line

Condition: ready for operation (used), Year of construction: 2020, Wichelmann Drum Coater Potato Flour Coater Potato flour is conveyed into the drum via a spiral screw. The discharge conveyor has a shaking and trill function. The speed control knob is defective. Rodpswb Ukasfx Aahech The shaft has a dent and is bent. The shaft where two wheels are mounted to rotate the tumbler is bent.

Condition: used, functionality: fully functional, total length: 1,750 mm, total width: 2,600 mm, total height: 2,150 mm, overall weight: 1,280 kg, tank capacity: 2,800 l, The Dorit VV-6-1401 Vacuum Churn is designed to improve the quality of meat products by facilitating the marinating and tenderizing process. Made of stainless steel, it ensures durability and hygiene, while allowing for simplified front loading and unloading. Thanks to its automatic discharge system, the front-to-rear transition is seamless, optimizing production efficiency. The machine offers advanced features such as a programmable timer to manage processing times and settings for speed, program, and vacuum. Built-in gauges monitor vacuum and operating status, ensuring consistent results. This churn is ideal for meat marinating operations, allowing for even absorption of salts and marinades, while increasing production capacity thanks to its varied programs. Dorit Vacuum Meat Tumbler Stainless steel construction Front loading and unloading Automatic unloading when switching from front to rear Rcjdpfxou E Ip Ao Aahjh Programmable interval timer for controlling total time, massage, and rest interval Setting switch for speed, program, and vacuum Gauges for vacuum and operating status Voltage: 400 V three-phase Frequency: 50 Hz Drum volume: 2800 L / Maximum capacity: 1400 kg Dimensions (d x w x h): 1750 x 2600 x 2150 mm Net weight: 1280 kg rjmpaoh5

Condition: used, functionality: fully functional, GALAN 930 cuts fresh, tumbled, frosted and cooked product from meat, fish, poultry, vegetables and fruits for the pet food industry. The product can be cut in one or two dimensions, into slices, strips or cubes. All blades cut with a drawing movement. Therefore the product is cut very gently, almost like a hand cut. The cutting dimension can vary from 4 x 4 to 130 x 370 mm. Rjdswntvnepfx Aahech * Production will depend on the cutting size and the product to be cut.

Condition: ready for operation (used), functionality: fully functional, The Lutetia T4 vacuum churn is an essential tool for meat processing companies looking to optimize the quality and efficiency of their processes. Thanks to its high-performance vacuum system, this churn ensures even absorption of liquids, improving the texture and flavor of finished products. Indeed, it allows for the efficient marinating of large quantities of meat, guaranteeing consistent, high-quality results. Furthermore, the Lutetia Type 4 Churn stands out for its robustness and ability to meet the demands of intensive production environments. With its large mixing capacity, it is perfectly suited for large production runs, while ensuring a smooth and fast workflow. Furthermore, it integrates easily into different production lines, offering great flexibility in terms of managing the volumes and types of meat processed. Rcedpfxjwf E H Tj Aaheh In short, the Lutetia Type 4 Churn is a reliable and efficient solution for improving the productivity and quality of meat products, while ensuring optimal performance. Technical specifications: Lutetia Type 4 vacuum meat tumbler Meat + brine capacity: 1800 to 2000 kg Overall length: 3285 mm Width: 1450 mm Diameter with drum: 1340 mm Height: 2000 mm Weight: 1400 kg Volume: 3150 L G4xbfm+f

Condition: used, functionality: fully functional, total length: 2,520 mm, total width: 1,200 mm, total height: 1,900 mm, overall weight: 1,000 kg, tank capacity: 1,650 l, The Lutetia T2 vacuum churn is a machine specially designed to optimize the meat marinating process in industrial environments. Thanks to its vacuum technology, it ensures better absorption of brines, guaranteeing a more tender texture and more intense flavors. In fact, the vacuum process enables marinades to penetrate deep into the meat fibers, improving the quality of the final product. What's more, the Lutetia T2 churn is perfectly suited to medium-sized productions, with a processing capacity of 800 to 1000 kg of meat and brine. What's more, its compact design makes it easy to integrate into different production environments, making it an ideal choice for companies looking to improve efficiency without sacrificing space. What's more, its robust, durable construction enables intensive use, while minimizing maintenance costs. In short, the Lutetia T2 vacuum tumbler offers a high-performance solution for companies wishing to optimize the quality of their meat products while maximizing productivity. Thanks to its efficiency, it guarantees consistent, reliable results to meet the demands of the sector. Technical specifications: Rsdpfou E Idyjx Aahsch Lutetia Type 2 vacuum meat churner Meat + brine capacity: 800 to 1000 kg Overall length: 2520 mm Width: 1200 mm Diameter with tires: 1122 mm Height : 1900 mm Weight: 1000 kg Volume: 1650 L