Used Turret Punching Machine for sale (64,688)

Year of construction: 2013, condition: used, including 1 punching die / 2:1 round hole Machine cycle speed: 60 strokes per minute Operating modes: Punching die only: for standard jobs (regular paper) Punching die with separating device: for difficult jobs (with cardboard) Production speed: Depends on the size and condition of the paper to be punched, but is lower than the maximum cycle speed. Tool change mode: Manual mode with a duration of approx. 45 seconds Format change mode: Manual mode with a duration of less than 1 minute Maximum punching thickness: 0.7 mm (equivalent to approximately 7 sheets of 80 gsm). Nodey Inzropfx Aqvsct Maximum diameter of punched holes: 8 mm Paper weight: from 80 to 250 gsm Minimum sheet size: 138 x 138 mm Maximum sheet size: 330 x 300 mm Connection rating: 220 – 240 V, 50/60 Hz Technical specifications according to manufacturer's information (without guarantee)

Year of construction: 2000, condition: good (used), Pressing force 28 t X-axis 2000 mm Y-axis 1000 mm Machine weight approx. 11000 kg Nedpfxoi Eld Ue Aqvjct

Condition: good (used), Year of construction: 2004, functionality: fully functional, Punching force: 220 kN Sheet thickness: 8 mm Working area: 2535x1280 mm Sheet thickness for stainless steel: 4-6 mm Accessories: - Tool change cassettes Nsdpfeyrcycjx Aqvoct - Table with ball rollers - Operating hours: 97,000

Condition: good (used), Year of construction: 2002, functionality: fully functional, punching force: 20 t, TECHNICAL DETAILS Machine capacity: 200 kN (20 t) Air pressure: 5 bar Air flow rate: 250 Nl/min Oil capacity: 160 l Turret speed: 25 rpm Travelling ranges: Machine travel range without repositioning: 1,250 mm x 2,100 mm Processing Max. sheet thickness with ball bearing table: 6 mm Max. sheet thickness with brush table: 3 mm Max. weight per table: 100 kg Accuracy Punching accuracy (in standard mode): ±0.1 mm Positioning accuracy (repeatability): ±0.07 mm Performance Strokes per minute, feed 25.4 mm: X320 / Y250 Nibbling cycle, feed 1 mm: X920 / Y920 Tools Minimum programmable step: 0.01 mm Number of tools: 31 Max. tool diameter: 88.9 mm Ncsdpfxoy Symue Aqvjt Dimensions (L x W x H): 4,890 x 4,370 x 2,137 mm Machine weight: 11,500 kg Note: No tools included, special transport required.

Year of construction: 2015, condition: ready for operation (used), functionality: fully functional, GBC Magnapunch Pro punching machine Operation: foot pedal or table switch Working width: 356 mm Formats: up to DIN A4 (oversized) Productivity: up to 49,000 sheets per hour Power supply: 230 V / 50 - 60 Hz Nedpfx Aqoy Tm Arsvjct Dimensions: 510 x 450 x 270 mm (D x W x H) Weight: 50.3 kg

Condition: like new (used), Year of construction: 2008, PE 100 D; Manufacturer: PME, Year of construction: 2008 Nominal Pressing Force: 1,000 kN Ram Adjustment: 80 mm Adjustable Ram Stroke: 10...90 mm Continuously Adjustable Strokes per Minute: 40...140 / min Tool Installation Height (at maximum stroke bottom and adjustment top): 380 mm Table Clamping Surface (W x D): 900 x 560 mm Ram Clamping Surface (W x D): 900 x 560 mm Lateral Passage (W x H): approx. 365 x 575 mm Main Motor Power: 11.0 kW Ncedpoy Sku Aefx Aqvot Machine Height: approx. 3,240 mm Machine Weight: approx. 8,600 kg Equipment: H-frame, motorized ram adjustment, fully automatic stroke adjustment Infinitely variable stroke speed control (ABB) Siemens S7/300; Pilz press safety control Touch screen in movable operator panel Electronic press force measurement Central lubrication Stroke gate Split, movable table plate Centering groove in ram Anti-vibration mounts Roll Feed: Band width 200 mm, band thickness: 2 mm Decoiler: driven, ultrasonic band loop control, manual expansion Coil weight: 600 kg

Condition: used, Year of construction: 2001, Rotary die-cutting machine, model BRS-320-D20-U800, with accessories Production direction: right to left Strip infeed basket with strip guide Driven feed, lower roller driven Upper roller adjustable manually Internal lateral strip guides 2 rotary die-cutting heads, quick-change system, many adjustment options 4 rotary die-cutting stations, for changing Strip outfeed basket Scrap conveyor Wheel displacement for transferring material from the machine line to rollers Protective covers with safety interlocks Includes die-cutting tools Includes control system and operator panel Includes electrical documentation Includes original documentation All plug connections use Harting connectors This machine was used to punch C-rails and DIN rails from 2-3 mm sheet metal. Nedoy Szlxjpfx Aqvjct It operated flawlessly in production at the customer's plant until it was dismantled. We can provide support for integrating the machine into an existing profiling system or other applications.

Condition: used, Rotary punching machine, model BRS, with accessories Production direction: left to right Strip infeed basket with strip guide Driven feed, driven lower roller Upper roller adjustable manually Ncedey Syivepfx Aqvot Internal lateral strip guides 2 rotary punches, numerous adjustment options Strip outfeed basket Scrap conveyor belt Wheel displacement for transferring material out of the production line to rolls Protective covers with safety interlocks Including punching tools Including control system and operating panel Including electrical documentation The machine was used to punch C-rails and hat sections from 2 mm sheet metal. It operated flawlessly in the customer's production facility until it was dismantled. We can provide support for integrating the machine into an existing profiling system or other equipment.

Condition: new, Year of construction: 2025, functionality: fully functional, BAYKAL LASER TUBE CUTTING MACHINES: BLT 2D or 3D cutting, from 1 kilowatt to 6 kilowatts, laser tube cutting machine for superior quality, no need for sawing, drilling or deburring. BAYKAL BLT 2D or 3D Lasertubes is a fast and flexible tube laser cutting machine with 6 meters and 8 meters size options and a cutting option XXL pipes up to 220 millimeters and rectangular tubes up to 220 by 220 millimeters , wall thicknesses of up to 10 millimeters for mild steel. Important technical information for BAYKAL BLT 2D or 3D Lasertubes; Maximum outside diameter of round tube in millimeters: 220 Maximum outside dimensions of rectangular tube in millimeters: 220 by 220 Maximum workpiece weight in kilogram/meter: 70 Technical specifications for loading; Load 1 ( front rear ): Bundle Load 2 ( front rear ): Semi auto load Load 3: Manual Minimum loading length (meter): 2 meters Maximum unloading length (meter): 4 - 6 meters Bundle loading capacity (kilogram): 3500 kilogram Technical specifications for unloader; Three programmable positions, rear conveyor belt and motorized front and rear collection tables. Unloading length (meter): 4 - 6 meters Ncsdort Hurjpfx Aqvot

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 280022, Schüco profile punching tool for facade series FWS50 and FWS60 with base frame Ncjdpfoy R D Aksx Aqvet

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, pressing force: 32 t, working height: 200 mm, controller model: Siemens 840D, working length: 2,150 mm, TECHNICAL DETAILS Bending length: 2,150 mm Maximum bending height: 200 mm Minimum length/width between bends: 160–350 mm Pressing force: 32 t MACHINE DETAILS Control: Siemens 840D Dimensions & Weight Dimensions (L x W x H): 8,500 x 7,000 x 2,850 mm Weight: 30,000 kg EQUIPMENT Automatic tool changer Manipulator Reverse bending cycle Nodpsy D Ihwefx Aqvsct Sheet centering system Additional top tools Loading and unloading system

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, punching force: 30 t, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,250 mm, overall weight: 6,950 kg, EUROMAC PUNCHING MACHINE MOD. 1250/30 – 2000 AUTOINDEX YEAR 2009 – CE – FULLY REFURBISHED, AS NEW. Maximum punching force: 300 kN Y-axis travel with multitool: 1300 mm Y-axis travel with single punch: 1250 mm Ncedpfx Aey Dgrneqvet X-axis travel: 1250 x 2000 mm Automatic repositioning: Up to 10,000 mm Punch stroke adjustment: from 0.1 to 31 mm Autoindex multitool stations: 5 Rotational speed: Programmable Y + X 1250 speed: 50 m/min Y + X 2000 speed: 60 m/min Positioning accuracy: +/- 0.1 mm Clamp opening: 11 mm Maximum strokes: 300 (1/min) Maximum sheet thickness: 10 mm Maximum punching diameter: 81 mm Installed power during operation: 7.5 kW Year: 2009 CE marked machine Overall dimensions: 2000 x 4000 x h 3350 mm Weight: 6950 kg

Condition: excellent (used), machine/vehicle number: PA-399, Format: A3 Paper format: ca 31x45cm Ncodpfeh Eh U Rsx Aqvjt

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: NX1102193, SPECIFICATION Table size 1244 x 230mm Longitudinal traverse 700mm Cross traverse 300mm Vertical traverse 405mm Quill travel 125mm Quill feeds 0.045-0.086mm/rev Quill diameter 86mm Quill taper R8 Spindle motor 2.2kW Spindle speeds (inf. Variable) 50-3500rpm Weight 1200Kg Machine in Metric execution Ncsdpfjy S Shwox Aqvet MACHINE EQUIPPED WITH Sino 3 axis DRO system Longitudinal power feed One shot centralised lubrication system Low voltage halogen worklight Spindle guard Coolant system

Condition: used, Year of construction: 1997, operating hours: 50,161 h, machine/vehicle number: 080163, Trumatic 600L 1600 for sale. Punching part is in good condition. Laser part needs to be looked after Ncjdpfx Asu Hxmzeqvst

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Serial number: 134361 Year of manufacture: 2012 Control: Fanuc series 160 I PB Nedpfoyyk Ursx Aqvect Max. sheet size: 3000 x 1500 mm Machine weight: 15,100 kg

Year of construction: 1990, condition: used, Punching machine Trumpf Trumatic 240 Nedpfxey Ru Ido Aqvect

Year of construction: 2020, condition: ready for operation (used), A barely used foil die-cutting and embossing machine Kama with integrated hot foil stamping is available. Die-cutting force: 165t, max. sheet format X/Y: 760mm/600mm, min. sheet format: 279mm/210mm, max. die-cutting format X/Y: 743mm/585mm, production speed: 5500sheets/h, gripper margin: 10mm, min. paper weight: 100g/m², max. cardboard weight: 1500g/m². Machine dimensions X/Y: approx. 5000mm/2700mm/2750mm, weight: approx. 6000kg, operating hours: approx. 1000h. Including Kama AutoRegister, vacuum pump, compressor and servo main drive. Documentation available. An on-site inspection is possible. Njdpfx Ajy Nnakoqvsct

Condition: good (used), Universal punching machine Ncjdpfx Aoiki Dbsqvet Dimensions: 145x120x210 cm LxWxH

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1002650004, total height: 3,170 mm, ram adjustment: 60 mm, installation height: 270 mm, table height: 1,300 mm, total width: 2,875 mm, total length: 2,875 mm, drop-through hole in table: 150 mm, table length: 1,250 mm, table width: 550 mm, pressing force: 50 t, control cabinet height: 2,200 mm, control cabinet length: 1,800 mm, control cabinet width: 600 mm, stroke adjustment: 60 mm, clearance between the columns: 1,290 mm, working width: 1,250 mm, distance between side stands: 260 mm, distance between stands: 1,690 mm, overall weight: 9,900 kg, punching force: 50 t, RASTER punching system RST 500-1250 DH with soundproof cabin and tool monitoring. The machine is in good condition. Stroke rate: 50 – 800 spm. Previously operated in single-shift mode. The machine can be inspected under power. Price on request. Njdsyyvgtspfx Aqvsct

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1002570003, total height: 3,450 mm, ram adjustment: 80 mm, installation height: 270 mm, table height: 1,280 mm, total width: 1,700 mm, total length: 3,065 mm, drop-through hole in table: 210 mm, table length: 1,500 mm, table width: 750 mm, pressing force: 63 t, control cabinet height: 2,200 mm, control cabinet length: 1,800 mm, control cabinet width: 600 mm, stroke adjustment: 80 mm, clearance between the columns: 1,540 mm, working width: 1,500 mm, distance between side stands: 360 mm, distance between stands: 2,020 mm, overall weight: 17,000 kg, punching force: 63 t, RASTER punching system RST 630-1500 DH with soundproof enclosure and tool monitoring. The machine is in good condition. Stroke rate: 30 - 700 1/min. Operated in single-shift operation. The machine can be inspected under power. Price on request. Nedpfxoyyppbs Aqvect

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Overhauled BRUDERER BSTA300 automatic punching press incl. new press control unit Technical data: ----- Tonnage 300KN Die installation opening 750mm Stroke rate 80-1400 (depending on selected stroke) Adjustment stroke 13, 16,19,25,32,38,44,47 Plunger adjustment range 51mm Tool installation height 171-239 mm (depending on the selected stroke) Clamping plate 740x480mm Nodjtvnlbepfx Aqvoct Ram area 630x360mm Belt passage width 206mm Base plate opening 710x160mm Belt infeed height 50-120mm Belt direction left to right Feed Servo feed Machine weight approx. 5150 kg Machine color RAL 1013 pearl white Color attachments RAL 7016 anthracite Control cabinet color RAL 7035 light grey

Condition: used, Year of construction: 2005, Finn-Power C5-25 - Sheet Metal Processing Center / Nibbler - Siemens Sinumerik 840 D CNC control - Comprehensive accessory package with approx. 400 tools - Various spare parts included in the scope of delivery - Including machine enclosure - Machine is still operational - Approx. 12,000 operating hours - Year of construction: 2005 Technical Data Capacity: Ncsdpfxeyx Ib He Aqvjt - Max. sheet size (X x Y): 2530 x 1270 mm - Min. sheet size (X x Y): 300 x 100 mm - Max. sheet thickness: 8 mm - Max. sheet weight: 200 kg - X-axis length: 2584 mm (X-42...X2542) - Max. X-axis traversing speed: 90 m/min - Y-axis length: 1317 mm (Y-25...Y1292) - Max. Y-axis traversing speed: 60 m/min Stroke Speeds: - Marking: 3000 strokes/min - Max. number of strokes (1 mm increment): 1100 strokes/min - Hole-to-hole (25 mm increment): 420 strokes/min - Pitch (250 mm increment): 150 strokes/min Punching: - Punching force: 300 kN - Punching stroke: Servo-hydraulic - Stroke depth: Numerically adjustable - Stroke length: Programmable - Stroke speed: Programmable Tools: - Tool stations: 20 - Max. punch diameter: 89 mm - Tool turret rotation: 23.8 rpm - Tool change time: 1 - 3 s CNC Index Tools: - Number of rotating stations: Standard 2 / max. 10 pcs - Max. punch diameter: 89 mm - Max. tool rotation speed: 166 rpm - Clamps: 2 pneumatic units - NC program memory: 1500 kB Punching accuracy according to LKP Test 7100: - Max. approach accuracy (X/Y-axis): 0.1 mm - Max. hole-to-hole distance deviation (X/Y-axis): ± 0.05 mm - Angle deviation: ± 0.1° Positioning accuracy according to VDI/DGQ 3441: - Positioning deviation Pa (X/Y-axis): ± 0.04 mm - Positioning deviation Ps (X/Y-axis): ± 0.02 mm Installation: - Electrical connection: 80 KVA - Average power consumption: 30 kW - Average compressed air consumption: 2.5 Nl/s - Max. compressed air consumption: 5 Nl/s - Min. compressed air supply: 6 bar - Oil tank capacity: 400 l - Machine weight: 12,000 kg

Condition: excellent (used), Year of construction: 2018, operating hours: 1,600 h, functionality: fully functional, machine/vehicle number: 441, punching force: 28 t, total height: 2,020 mm, total width: 4,118 mm, total length: 4,042 mm, sheet thickness (max.): 6 mm, type of input current: three-phase, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,250 mm, punching diameter: 105 mm, workpiece weight (max.): 200 kg, overall weight: 8,400 kg, table width: 1,250 mm, table length: 2,000 mm, input current: 35 A, input frequency: 50 Hz, power of the servo motor: 3,700 W, feed rate X-axis: 120 m/min, feed rate Y-axis: 75 m/min, space requirement width: 4,100 mm, space requirement length: 4,600 mm, space requirement height: 2,200 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,250 mm, positioning speed: 60 m/min, construction width: 4,118 mm, tool length: 30 mm, positioning accuracy: 0.05 mm, repeat accuracy: 0.025 mm, Equipment: safety light barrier, The Boschert Compact 1250 rotation machine is fully operational. Please contact us to arrange a viewing. Nsdpfx Aoww U T Heqvect

Condition: good (used), Year of construction: 2004, Comm. no.: Lg 34522 high performance punching press HAULICK+ROOS ROS 500 - 1250 used, in good condition year of construction 2004 (without sound insulation cabin) with - infinitely variable drive - 2 connecting rods power unit - pneum. Clutch-brake combination - stroke adjustment - screen control Siemens PC 670 - oil circulation lubrication Ncodpfsip Uqmsx Aqvjt Technical data Pressing force max. 500 KN Stroke rate 30 to 900 min.-1 stroke 12 to 60 mm Installation height (max, stroke un U.T.) 320 mm column width 1.250 mm Table area 1.250 x 730 mm Drop-through opening in table 1,160 x 140 mm ram area 1.250 x 450 mm ram adjustment 60 mm Drive power 26 kW Weight approx. 11,000 kg Dimensions (L x W x H) approx. 2,800 x 1,300 x 3,250 mm Equipment and accessories: Servo roll feeder VAMCO SP 150 Year of manufacture 2014 Passage width max. 150 mm Material thickness max. 3.0 mm