Used Twin Saw for sale (8,380)

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Storage location: Garbsen Kjdpoxnlgcofx Afpelt

Condition: excellent (used), Year of construction: 2000, Sawblade tiltable +/- 45 ° Length of the rolling table 2800 mm cutting width 1440 mm Motor output 7,5 kW Cutting height 150 mm Saw blade diameter 450 mm Kodpoxcg Hgjfx Afpolt weight of the machine ca. 1200 kg range L-W-H 3,2 x 3,4 x 1,7 mm

Condition: excellent (used), Year of construction: 2000, roll diameter 420 mm throat 400 mm workpiece height 280 mm saw band length 3200 - 3400 mm table - swivable +/- 20 ° Kjdpsxcp Sfjfx Afpelt table surface area 600 x 600 mm table - tiltable +/- 45 ° total power requirement 1,7 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 1 x 0,7 x 1,9 m

Condition: used, Year of construction: 2004, 1 piece oscillating saw, SCHEPPACH WS600WOX Blade diameter min. 550/max. 600mm, bore diameter 30mm Color: as shown in the pictures, consistent with the images and inspection Kodpfx Afoy Tkfdepslt Year of manufacture: 2004 Condition: used

Condition: used, Year of construction: 2007, 1 unit of MACO KS425A under-table circular saw with roller conveyor, length approx. 4m, self-dismantled Color: as shown in the pictures, according to the images and inspection Kledpfxsy Tkbrs Afpjt Year of manufacture: 2007 Condition: used

Condition: good (used), Code: 0353 Brand: SCM Model: SIGMA 85 KC - CE Standard Electronic horizontal panel saw with clamps for precise cutting of panels, suitable for joinery, furniture, custom made furniture, doors, kitchens, plastics, composite materials and various – CE Standard Technical data: Cutting length 3200 mm Cutting width 3200 mm Blade projection 85 mm Blade carriage feed speed 6–30 mt/min N°7 panel clamps to ensure the pack is held securely in place Main blade diameter 350 mm Hole 80 Main blade motor 11 Kw Main rotation speed 3900 rpm Kjdey A Svpopfx Afpelt Scoring unit diameter 160 mm - Hole 55 – Motor 1,5 kW Automatic aligner: ensures precision during cross-cuts, reducing processing times N°3 front panel support surfaces Suction inlet diameters: n° 2 diameter 120 - n° 1 diameter 150 Compressed air 7-8 bar Overall dimensions of assembled machine mm 5700 x 4350 x 1700 h Weight kg 3300

Condition: used, Year of construction: 1996, workpiece length 55- 170 mm work piece width max. 28 mm workpiece height max. 27,5 mm milling motor 2 Klodoy Ty Hqepfx Afpst cut-off saw 1 Special machine APK automatic sawing and milling machine for cutting wooden blocks to length and then milling them. Special design for the production of cutlery tray inserts (see pictures) or similar workpieces. Work sequence: 1. feeding the material from the magazine 2. cutting (sawing) to the desired length 3. milling of the cut workpieces 4. ejection of the finished part.

Condition: used, 1 universal saw, EU MENIA model mobile, 230 volts Color: as shown in the pictures, according to the images and upon inspection Klsdjy Thluopfx Afpot Condition: used

Condition: used, Year of construction: 2010, Sliding carriage: 3000 mm CNC parallel guide, cutting width 1000 mm. Motor: 5.5 kW electric motor for height and swivel adjustment. Swivel range: 0.5 - 47°. Digital display for swivel angle and cutting height. Saw blade diameter: max. 550 mm. Cutting height: max. 200 mm. Prepared for a scoring saw. Control panel at eye level, swiveling. Front table, swiveling. Table extension 840 mm. Angle/miter fence 3200 mm. Klsdpfxoy Tpzks Afpst Location: Supplier.

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Cutting plane directly on the saw blade Large-sized saw unit made of cast iron, double-mounted on the cast iron table – guarantees stability, precision, smooth operation, and long service life; 6-year HOLZKRAFT warranty on wear of the swivel segments Precision-guided format sliding table made of aluminum, anodized as standard 10-year HOLZKRAFT warranty on wear of the sliding table guide rails Parallel fence as standard with round bar guide and fine adjustment Large work table made of milled cast iron Smooth operation and precise cuts Standard table extension and table lengthening enable easy work with larger workpieces Extendable aluminum telescope fence with angle adjustment and two professional folding fences Kljdpfx Aswb Eh Nsfpjt Made in Italy Motor 4.0 kW - 400 V Saw blade tilt 90 - 45° Format sliding table length 1600 mm Table length 1020 mm Table width 325 mm Cutting width with parallel fence 700 mm Max. cutting height 90° = 100 mm Max. cutting height 45° = 79 mm Saw blade diameter 315 mm Saw blade speed 315 mm Max. crosscut width to the left of the saw blade 1660 mm Scoring saw blade diameter 80 mm Scoring saw blade speed 7600 mm Weight: approx. 276 kg Note! The parallel fence and table extension on the right are not visible in the pictures. Availability: short-term Location: Flörsheim

Condition: good (used), Year of construction: 2005, functionality: fully functional, Roller diameter: 450 mm Saw band dimensions: 4,450 x 34 x 1.1 mm Cutting speed: 30 / 60 mm Total power consumption: 2.2 kW Machine weight (approx.): 1180 kg Dimensions: 2100 x 1360 x 2200 mm including roller conveyors. Kljdjy Tmnzjpfx Afpjt

Condition: excellent (used), CATALOG NUMBER 7680 TECHNICAL DATA Kedpfx Aoy R Dy Aofpslt - Max. blade diameter: 500mm - Spindle diameter: 30mm - Hydraulic blade stroke - Max. cutting width: 500mm - Max. cutting height (in the center, with a 500mm blade): 160mm - Main motor: 4kW - Table dimensions: 715x1070mm - Table height from base: 790mm - Roller tables: 2 pcs - Table dimensions: - Infeed length/width: 2000x640mm - Outfeed length/width: 2000x640mm - Machine dimensions (L/W/H): 1400x940x1070mm - Total weight: 480kg ADVANTAGES – 2 roller tables – Hydraulic blade stroke – Used saw, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on rate 4.2 EUR) (Prices may change due to strong fluctuations)

Condition: excellent (used), CATALOG NUMBER 7541 Technical Specifications: - Maximum diameter of main saw blade (without scorer): 400mm - Maximum diameter of main saw blade (with scorer): 350mm - Blade bore diameter: 30mm - Maximum cutting height for 400mm blade: at 90 degrees – 120mm, at 45 degrees – 85mm - Maximum cutting height for 350mm blade: at 90 degrees – 95mm, at 45 degrees – 67mm - Main blade adjustable vertically and for angle - Blade guard - Equipped with side sliding table - Cutting length on sliding table: 1700mm - Cutting width on sliding table: 1400mm - Cutting width at fence: 1350mm - Main motor power: 6kW - Table dimensions: 1190x990mm - With table extension: 1880mm - With table enlargement: 1890mm - With scorer unit - Maximum scorer blade diameter: 120mm - Scorer spindle diameter: 20mm - Scorer motor power: 0.75kW - Three spindle speeds: 3500, 4500, 6000 rpm - Brake - Extraction port diameter: 80, 120mm - Machine dimensions (LxWxH): 3050x2200x1600mm - Weight: 800kg ADVANTAGES – Manufactured in Poland – DTR documentation included – Blade guard – Equipped with scorer unit – With table extension and enlargement Klodpfx Afey R Dvdepet – Used saw, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant rate fluctuations)

Condition: excellent (used), FOD BYDGOSZCZ Shaft Multi-Blade Saw* DPPA III 50 650/140 Catalogue number: 7318 TECHNICAL DATA - Maximum cutting height: 140 mm - Maximum workpiece width: 700 mm - Working width of shaft with saw blades: 650 mm - Maximum saw blade diameter: 400 mm - Arbor hole diameter: 70 mm From above: - Kickback pawls - 2 driven, toothed feed rollers From below: - Kickback pawls - 2 driven, smooth feed rollers - Saw shaft - Ribbed feed roller - Stepless feed speed adjustment with inverter - Feed motor: 4.4 kW Klodpfx Ajy R Dpqefpjt - Main motor: 30 kW - Machine dimensions (LxWxH): 2500 x 1400 x 1900 mm - Weight: approx. 2500 kg – Made in Poland – Used machine, in very good condition Net price: 36,900 PLN Net price: 8,790 EUR (based on 4.2 EUR exchange rate) (Prices may vary due to significant exchange rate fluctuations) * MAR-MASZ guarantees the quality of your purchase but is not an authorized representative of the manufacturer. All trademarks and names are used solely for identification and informational purposes. We only resell products that have been previously placed on the market by the manufacturer. We have no business relationship with the manufacturer.

Condition: excellent (used), Catalogue number 7807 TECHNICAL SPECIFICATIONS - Track width: 350mm - Cutting width: 350mm - Blade diameter: from 355 to 505mm - Cutting height: 10-170mm - Spindle diameter: 80mm - Table dimensions: 1900x790mm - Height from base to table: 830mm From above: - 2 rows of pawls/kickers - 2 smooth, metal glide rollers - Shaft with saw blades - 2 pressure glide rollers From below: - Guide bar - Pawls/kickers - Track - Electric height adjustment of the body - Central lubrication - Stepless speed adjustment via inverter - Feed motor: 4kW - Main motor: 75kW - Extractor spigot diameter: 2x150mm - Overall dimensions (L/W/H): 2050x1800x1800mm - Weight approx.: 3500kg FEATURES - German-made Ksdpfxsy R Dkzj Afpjlt - DTR technical documentation - Used multi-blade saw - Very good condition Net price: 58,900 PLN Net price: 14,000 EUR depending on exchange rate 4.2 EUR (Prices may change due to stronger exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7051 TECHNICAL SPECIFICATIONS - Wheel diameter: 630 mm - Table dimensions: 890x710 mm - Table adjustable in angle - Motor: 3 kW - Max cutting height: 240 mm - Throat (band to frame): 570 mm - Extraction port diameter: 100 mm - Dimensions (L/W/H): 1250x800x2300 mm - Weight: 681 kg ADVANTAGES Kledpfxjy R A E De Afpet – Manufactured in Poland – Very good condition – Used saw Net price: 7,900 PLN Net price: 1,880 EUR depending on the rate 4.2 EUR (Prices subject to change in case of significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7050 TECHNICAL DATA - Wheel diameter: 800 mm - Table dimensions: 1100x800 mm - Angle-adjustable table - Motor: 5.5 kW - Max cutting height: 340 mm - Throat/clearance (blade to frame): 680 mm - Extraction port diameter: 90 mm - Dimensions (L/W/H): 1500x950x2600 mm - Weight: 987 kg Klsdpfx Asy R A Edjfpst ADVANTAGES – Manufactured in Poland – Very good condition – Used saw Net price: 8,900 PLN Net price: 2,120 EUR based on exchange rate 4.2 EUR (Prices may change with significant fluctuations)

Condition: used, Year of construction: 1998, Sliding carriage: 5000 mm Kjdpjy Tl Exefx Afpjlt Motor: 11 kW / 15 hp Cutting width: 1050 mm, without scoring blade, prepared for scoring blade Tip Servo Drive Laser-cut seam indicator Electromotive height and swivel adjustment Dimensions: 5000 x 1400 x 1900 mm Weight: approx. 1100 kg Location: Nattheim

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Saw blade diameter: 290-300 mm Saw blade speed: 4750 rpm Motor power: 4.5/5.5 kW Motor speed: 2880 rpm Max. cutting width: 5300 mm Max. cutting height: 2100 mm Max. panel height: 2200 mm Max. processing thickness: 80 mm Small parts support: Yes Transport dimensions approx. 7000 x 2000 x 2600 mm Weight approx. 1000 kg Availability: short-term Klodpfx Afjy Dkg Nspet Location: Röllbach

Condition: used, Year of construction: 2025, cutting diameter max. 225 mm saw band length 2.480 mm width of saw-band 27 mm Kedpfxjykb Ene Afpelt dimensions of saw-band 2.480 x 27 x 0,9 mm cutting angle 0 - 60 ° band speed 20 - 90 m/min Cuttingrange 90° max. 225 mm capacity 90 degrees: square 190 mm capacity 90 degrees: flat 150 x 245 mm capacity 60 degrees: round 90 mm capacity 60 degrees: square 90 mm capacity 60 degrees: flat 120 x 90 mm capacity 45 degrees: round 145 mm capacity 45 degrees: square 150 mm capacity 45 degrees: flat 190 x 150 mm total power requirement 1,5 kW weight of the machine ca. 185 kg dimensions of the machine ca. 1,5 x 1,2 x 1,6 m Metal Bandsaw OPTIMUM - OPTIsaw S 275 PV

Condition: used, Year of construction: 2004, Cutting height at 90°: 200 mm Cutting length: 410 mm Saw blade swivel: yes Saw blade tilting: no Roller conveyor / support table: no Saw blade diameter: 500 mm Speed: 2800 rpm Motor power: 5 kW Motor brake: yes Feed brake: Yes, hydraulic Extraction connection: 100 mm Machine length: Machine width: Weight: 110 kg Kedpfjyvz R Aox Afpolt

Condition: used, Year of construction: 1992, Carriage length: 2800 mm Cutting width at rip fence: 1250 mm Cutting width at crosscut fence: 2800 mm Cutting depth: 145 mm Kljdpeyrlzijfx Afpet Scorer: no Saw blade height adjustment: manual / hydraulic Saw blade tilt adjustment: manual / hydraulic Rip fence adjustment: manual Saw blade angle display: scale Cutting height display: - Rip fence display: scale Crosscut scale display: scale Saw blade diameter: Speeds: 4 Motor power: 5.5 kW Motor brake: yes Extraction connection: 80 mm and 120 mm Machine length: 3000 mm Machine width: 1700 mm Weight: 1000 kg

Condition: used, Year of construction: 2008, Cutting height at 90°: 200 mm Cutting length: 410 mm Mitre range horizontal: 45° - 90° - 25° Mitre range vertical: 60° - 90° - 30° Roller conveyor / support table: no Saw blade diameter: 520 mm Speed: 2,800 rpm Motor power: 5 kW Motor brake: yes Klodpfsy S Rrbsx Afpjt Extraction port: 100 mm Machine length: Machine width: Weight: 300 kg

Condition: used, Slider length: 2500 mm Cutting width at the fence: 1000 mm Cutting width at the rip fence: 2800 mm Cutting depth: 120 mm Scoring saw: no Saw blade height adjustment: handwheel Klsdpjy S Rq Dsfx Afpet Saw blade swivel adjustment: handwheel Fence adjustment: manual Saw blade angle display: scale Cutting height display: - Fence display: scale Rip fence scale: scale Saw blade diameter: max. 400 mm Speeds: 2800 / 4000 / 5500 Motor power: 5.5 kW Dust extraction port: 120 mm Machine length: 3000 mm Machine width: 1800 mm Weight: approx. 1300 kg

Condition: used, Year of construction: 2000, Cutting height at 90°: 200 mm Cutting length: 410 mm Horizontal miter range: 45° - 90° - 25° Vertical miter range: 60° - 90° - 30° Klsdpoy S Rq Rofx Afpjt Roller conveyor / support table: no Saw blade diameter: 520 mm Speed: 2800 rpm Motor power: 5 kW Motor brake: yes Dust extraction port: 100 mm Feed brake: yes Machine length: Machine width: Weight: 300 kg