Used Ultrasonic 20 for sale (28,904)

Year of construction: 2013, operating hours: 2,000 h, condition: used, functionality: fully functional, The Branson 2000XDT Ultrasonic Welder is a unit providing up to 2500W of power. It is designed for precision and efficiency in various plastic processing industries. With the reputable Branson brand backing it, this ultrasonic welder is perfect for sealing and welding plastic products with ease. This equipment offers reliable and high-quality results for a wide range of plastic materials. Trust in the Branson 2000XDT Ultrasonic Welder for all your plastic welding needs. Tedpfxoz Rm Tzo Airjd We have added sound sound proof housing (white box on photos with internal sound absorbing foam), so workers are not exposed to high frequencies and high sound levels. They can work without hearing protection. Access to work area is possible through transparent Plexiglass door. Dimensions of sonotrode are 200 x 125 x 115 mm L x W x H and allow for large product welding. Sonotrode is flat on the bottom. Number of nests are also part of the offer. Included sound proof housing for quiet operation. No need for additional hearing protection.

Condition: used, Year of construction: 2016, Overview Automated 2-vessel steam brewhouse for 20 BBL (2,347 L) batches, built in 2016 by American Beer Equipment (ABE), Lincoln, Nebraska, USA. The package covers the complete hot side: mash/lauter tun, kettle/whirlpool, hot and cold liquor tanks, plate heat exchanger, UL control cabinet with touch-panel HMI, an ATTSU steam generator and a reverse osmosis water treatment unit. Currently installed and in operation. Technical data - Manufacturer: American Beer Equipment (ABE) - Year of manufacture: 2016 - Batch size: 20 BBL (2,347 L) - Mash/lauter tun: 20 BBL (2,347 L), rake drive with 3 HP SEW gear motor - Kettle/whirlpool: 20 BBL (2,347 L) - Hot liquor tank: 30 BBL (3,520 L), steam heated - Cold liquor tank: 2,347 L - Heating: steam (brewhouse and hot liquor tank) - Material: AISI 304 stainless steel, vessels and piping Tsdjz Iypvspfx Airjd - Connections: 1-1/2" Tri-Clamp sanitary - Pumps: 2 HP stainless sanitary centrifugal pumps, 30 GPM at 15 PSI - Operation: automatic valves, transfers and pumps, controlled from the HMI - Electrical supply: 380 V, 3-phase, 50 Hz, 40 A Scope of Delivery - Mash/lauter tun | ABE | 20 BBL | rakes with SEW gear motor, grist hydrator, wort grant, mash pump | 2016 - Kettle/whirlpool | ABE | 20 BBL | steam heated, brew pump | 2016 - Hot liquor tank | ABE | 30 BBL | 3,520 L, steam heated, HLT pump, liquor blending assembly | 2016 - Cold liquor tank | ABE | 2,347 L | 2016 - Plate heat exchanger | ABE | 20 m² | AISI 304 plates, design temperature 150 °C, rated pressure 116 PSI (8 bar) | 2016 - Control cabinet | ABE | UL | touch-panel HMI, temperature controllers for mash, kettle and HLT, Delta frequency inverters | 2016 - Steam generator | ATTSU | RL-300/12 | natural gas burner, max. working pressure 12.3 bar, max. temperature 193 °C, 501 L total volume, 3 x 400 V, 1,130 kg empty weight | 2016 - Reverse osmosis unit | with water softener and brine tank - Hard-plumbed AISI 304 sanitary piping with automatic valves Documentation ABE brewhouse manual (specifications, plumbing and electrical diagrams, HMI screens) and ATTSU steam generator manual. Condition Used, installed and in operation. Availability From 23 September 2026. Location: Spain.

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 45 kg, total length: 350 mm, total width: 605 mm, total height: 1,080 mm, input voltage: 230 V, laser power: 20 W, laser wavelength: 1,064 nm, scan area length: 70 mm, scan area width: 70 mm, type of cooling: air, type of input current: AC, laser type: fiber laser, The mobile laser LAS 23 portable is characterized by its compact design. Small, handy and with custom-made attachments that can be individually exchanged in the quick-change system. With its mobile base, it can be moved to the workpieces to be marked. This makes it suitable for small, large and heavy workpieces. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Made in Germany - Fiber laser 20W (optional: 30 Watt, 50 Watt) - Laser class 1 - CE compliant, according to EU directives - Wavelength 1064nm - Marking field size 70x70mm (optional: larger) Tedpjzxcfksfx Aired - Signal lamp for indication of operating status - marking software EZCAD - Connection 230V - Air cooled - Laptop with Windows operating system - Dimensions: 350 x 605 x 1080mm (LxWxH) - Weight: approx. 40 Kg - weight of portable laser unit 2,8 Kg - Fiber optic cable approx. 2,50 m - Extraction optional

Condition: used, axle configuration: 3 axles, first registration: 08/1995, color: other, Year of construction: 1995 Empty weight: 5.600 kg Axle 1: left 3 mm right 5 mm Axle 2: left 4 mm right 4 mm Axle 3: left 5 mm right 5 mm We have the possibility to stack trailers! Tedpfxozw Evpe Airjd

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 01/2005, total length: 9,520 mm, total width: 2,480 mm, wheelbase: 7,170 mm, color: other, Year of construction: 2005 Tjdpfx Aiszvbdgerjd Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Empty weight: 4.280 kg Carrying capacity: 34.720 kg GVW: 39.000 kg Registration number: OH-53-TT

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 200 kg, total height: 2,372 mm, total width: 1,731 mm, total length: 1,000 mm, table width: 630 mm, quill stroke: 250 mm, table length: 400 mm, workpiece length (max.): 800 mm, workpiece width (max.): 500 mm, workpiece height (max.): 265 mm, GF AgieCharmilles FORM 20 Year of manufacture: 2008 Travel distances: X = 350 mm, Y = 250 mm, Z = 250 mm Tjdpfxoz D Hb De Airsd Max. workpiece size: X = 800 mm, Y = 500 mm, Z = 265 mm Max. workpiece weight: 200 kg Max. electrode weight: 50 kg Distance table - chuck: 230 - 480 mm APG FORM Generator - working current 72 amps Best achievable surface roughness Ra 0.2 µm Includes pneumatic chuck Erowa ITS 50 Includes 4-position electrode changer in magazine Machine weight (net): 2000 kg Machine dimensions (L x W x H): 1300 x 1850 x 2500 mm The machine has already been cleaned, serviced, and thoroughly tested. We would also be happy to commission the machine for you.

Condition: used, Year of construction: 2014, power: 5 kW (6.80 HP), We are selling a container press! 1. Manufacturer – Ludden und Mennekes Type – LM20L Tjdpfjz Hbzqjx Aired Year of manufacture – 2014 Capacity – 20 m³ Motor power – 5.5 kW 2. PRESKONTAINER LM20L, 2011, 5.5 kW Price on request!

Condition: used, Year of construction: 2012, machine/vehicle number: A092895, Marel OptiWeigher + 20-Gate Fish Grader with 6 Printers Grader type: dis-ma45-b600-dual Complete used Marel weighing, grading and packing system for fish processing. The system includes a Marel OptiWeigher dynamic weighing module and a dual-sided Marel grader with 20 grading outlets. Configuration: - Marel OptiWeigher - 20 grading gates - 10 gates on the left - 10 gates on the right Tedpfx Aiez Hc Aijrod - gate spacing: 675 mm - 6 label printers - 3 printers on each side - packing shelves - roller conveyors - packing buffers - stainless-steel food-processing construction - Intralox Series 1650 polypropylene belt - approx. grader length: 9,050 mm - electrical supply: 3 × 400 V + N - grader motor: 0.75 kW The product is dynamically weighed by the OptiWeigher and can then be automatically distributed to the selected grading outlet according to the programmed weight class. The machine was used for fish processing and is suitable for applications such as: - fish grading, - salmon processing, - batching, - weight classification, - direct packing at grading stations. It may also be adapted for poultry or other food products, depending on product size and process requirements. The six printer positions allow direct labeling at packing stations. Possible packing formats include: - cartons, - EPS / polystyrene boxes, - plastic crates, - tubs. The system may be integrated into a Marel Innova environment, subject to verification of the installed control and software configuration. Technical documentation available. Inspection possible by appointment. Price: on request.

Condition: good (used), mileage: 2,46,442 km, power: 55 kW (74.78 HP), first registration: 09/2014, fuel type: diesel, tire size: 195/65R15, axle configuration: 4x2, wheelbase: 2,720 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 5, emission class: euro5, number of seats: 2, total length: 4,380 mm, total width: 1,810 mm, total height: 1,860 mm, loading space length: 1,470 mm, loading space width: 1,290 mm, loading space height: 1,240 mm, Equipment: ABS, Bluetooth, air conditioning, central locking, electric window regulation, power mirror, = Additional Options and Accessories = - Heated mirrors - Halogen lamp - None - Manual - Radio/cassette - Fabric - Partition = Notes = Configuration: 4x2, Payload: 666 kg, Unladen weight: 1269 kg, Gross vehicle weight: 1935 kg, Trailer load, unbraked: 680 kg, Trailer load, center axle, braked: 995 kg, Type of cab: Single cab, Air conditioning, Number of airbags: 1, Rear windshield wiper, Parking assistance: None, Electric windows, Electric mirrors, Partition, Radio/cassette, Color: White, Heated mirrors, Type of lighting: Halogen lamp, Bluetooth, Engine power: 55 kW (74 hp), Number of cylinders: 4, Displacement: 1560 cc, Fuel: Diesel, Euro standard: 5, Drive technology: Timing belt, Gearbox type: Manual, Gears: 5, Power steering, ABS, Starter battery, Roof rack: None, Rear closure: Double door, Central locking, Number of seats: 2, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, Airco APK: 20-4-2027, Spare wheel, Tread depth spare wheel: 7%, Tire type: All-season tires = Additional Information = Axle configuration Tire size: 195/65R15 Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread depth left: 3 mm; Tire tread depth right: 2 mm Axle 2: Tire tread depth left: 5 mm; Tire tread depth right: 5 mm Weights Unladen weight: 1,269 kg Payload: 666 kg GVW: 1,935 kg Functional Tjdpfxoz H Nivs Aired Loading area height: 56 cm Maintenance APK (Technical Inspection): valid until 04/2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Identification License plate: VK-520-L

Condition: good (used), Year of construction: 2006, functionality: fully functional, Fanuc control system, 11 axes, Tedpfx Aez E Ayfsirod powered tools, tool changer spindle, Iemca tool magazine.

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: K787016, overall weight: 41,000 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 800 A, operating pressure: 40 bar, control voltage: 24 V, type of input current: three-phase, Equipment: documentation/manual, Krones Contiform S20 PET stretch blow molding machine – 20 cavities, output up to 40,000 units per hour. Used Krones Contiform S20 machine for manufacturing PET bottles. The machine is completely disassembled and prepared for loading onto a truck. Due to its disassembled condition, it is not possible to perform a test run or functional tests – it is sold as a complete set of components for reassembly by the buyer. Technical specifications: • Manufacturer: Krones • Model / Year: Contiform S20 / [2003] • Number of cavities: 20 • Nominal output (according to the manufacturer's specifications): up to 40,000 bottles/hour Todjz Euubepfx Airsd • Maximum container volume: up to 3 l (depending on the shape) • Oven: linear, with a 40 mm stroke • Neck size: 26/22 (PCO 1881) Scope of supply: [preform feeder, hopper/elevator and orienting device, chiller, molds, spare parts, etc.] Inspection possible by prior arrangement – the machine can be inspected in its disassembled state, with the components laid out in Kutno. Loading at the buyer's expense. Transport to be agreed. Price on request.

Condition: used, Hydraulic valve, servo valve, proportional valve Hydraulic servo valve, continuously variable valve, PARKER DFplus type D3FPE02YC9NB00 20 Todpfx Asz Eu E Heirod Manufacturer: Parker Hannifin GmbH Operating voltage: 24 VDC Operating pressure: max. 350 bar Length = 245 mm Width = 70 mm Height = 155 mm Weight: 6.2 kg Good condition

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 2,882 h, load capacity: 2,000 kg, lifting height: 3,300 mm, free lift: 1,600 mm, load center: 500 mm, fuel type: electric, mast type: duplex, construction height: 2,180 mm, battery capacity: 625 Ah, remaining battery capacity: 86 %, battery voltage: 48 V, DGUV certified until: 10/2027, fork length: 1,100 mm, tire condition: 100 %, color: orange, Equipment: 3rd hydraulic function, CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 20-20 P electric forklift with the following specifications: * Lifting capacity: 2,000 kg * Lifting height: 3,300 mm * Overall height: 2,180 mm * Year of manufacture: 2017 * Operating hours: 2,882 STILL 2.0-ton electric forklift, very good battery, new non-marking tires, duplex mast, side shifter, lighting, fork length 1,100 mm, charger. Price ex works, including 1,000 hours of service according to STILL manufacturer's specifications and a valid FEM (UVV) inspection upon sale. Inspection, demonstration, and test drive are available upon request after scheduling an appointment by phone. Sale is exclusively to commercial enterprises; subject to prior sale, errors, and typos. Tedpfx Aisz A Hu Usrsd We can deliver your new forklift cost-effectively using our own ramp-type low-loader (transport costs upon request). You can find more information and offers on our newly designed website!

Condition: new, Year of construction: 2022, machine/vehicle number: 27762, type of input current: three-phase, input voltage: 22,000 V, input frequency: 50 Hz, nominal power (apparent): 250 kVA, secondary voltage: 400 V, type of output current: three-phase, output voltage: 400 V, Equipment: type plate available, SEA Trasformatori TTO oil-immersed distribution transformer for outdoor installation. Todpoz Nx I Isfx Airsd Condition: new and unused warehouse stock. Never commissioned. Year of manufacture: 2022. Serial number: 27762. Country of manufacture: Italy. Nameplate data: - Rated power: 250 kVA - Primary voltage: 22 / 20 kV - HV tapping range: +/- 4 x 2.5% - Secondary voltage: 400 V - Rated secondary current: 360.8 A - Frequency: 50 Hz - Phases: 3 - Cooling: ONAN - Winding material: aluminium - Highest voltage for equipment: 24 kV - Insulation level: LI 125 kV / AC 50 kV - Temperature rise: oil 60 K / windings 65 K The attached photograph shows the original manufacturer nameplate.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, operating hours: 3,298 h, load capacity: 2,000 kg, lifting height: 2,700 mm, fuel type: electric, mast type: telescopic, construction height: 1,910 mm, battery capacity: 300 Ah, battery voltage: 24 V, fork length: 1,150 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 1,501 kg, total height: 1,910 mm, total length: 2,000 mm, total width: 820 mm, fuel: electricity, STILL EXV 20 – Electric pedestrian stacker TECHNICAL DATA Lifting capacity: 2.000 kg Lifting height: 2.700 mm Closed height: 1.910 mm Mast: Standard (2W270) Fork length: 1.150 mm Drive: Elektro 24V Battery: 24 V/300 Ah (2019) Gel Charger: Einphasig 24 V - not tested Tyres: Polyurethan Service weight: 1.501 kg Length: 2.000 mm Width: 820 mm Tsdpjz R Ug Rofx Airod Year of manufacture: 2019 Operating hours: 3.298 h Condition: working condition Internal no.: 1309188 Location: 14974 Ludwigsfelde bei Berlin Price on request. Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, left - right Tedpsz S Rdmofx Aired

Condition: used, axle configuration: 3 axles, first registration: 10/2017, color: other, Year of construction: 2017 Empty weight: 5.710 kg Axle 1: left 8 mm right 8 mm Tedpfx Aioz S Tc Sjred Axle 2: left 6 mm right 6 mm Axle 3: left 7 mm right 7 mm We have the possibility to stack trailers!

Condition: used, axle configuration: 3 axles, first registration: 09/2006, suspension: air, tire size: 385/55, tire condition: 30 %, color: other, Equipment: ABS, = Additional options and accessories = - Air Suspension - Disc brakes - Lift Axle Tedpoz Uq Hasfx Airsd = More information = Year of construction: 2006 Tyre size: 385/55 Tyre profile: 30% Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle

Condition: ready for operation (used), Year of construction: 2008, operating hours: 17,000 h, functionality: fully functional, ## 2008 Star SR-20RIII – 20 mm CNC Sliding Head Lathe Seven controlled axes | Twin spindles | Driven tooling | FMB magazine bar feeder | 140-bar coolant Todoz Uxmbepfx Airjd Available from Swiss CNC, this 2008 Star SR-20RIII CNC sliding head lathe combines 20 mm machining capacity, twin spindles and driven tooling for the production of precision components from bar. Equipped with FANUC Series 300iS-Model A CNC control, it offers versatile turning, milling, drilling, tapping and back-working capability. The sliding head and guide bush arrangement supports the material close to the cutting point, making the machine particularly suited to small-diameter and slender components. C-axis control on both spindles allows accurately positioned machining features, while the opposed sub-spindle enables rear-face finishing and secondary operations within the same machine cycle. Independent front- and back-working capability allows operations to overlap where the component and programme permit, helping reduce cycle times and the need for additional handling between machines. ### Technical specification | Specification | Details | |---|---| | Manufacturer / model | Star SR-20RIII | | Year of manufacture | 2008 | | Maximum machining diameter | 20 mm | | Maximum headstock stroke | 205 mm | | Controlled axes | Seven: X, Y, Z, XB and ZB, plus C-axis control on both spindles | | Main spindle speed | Up to 10,000 rpm | | Sub-spindle speed | Up to 8,000 rpm | | CNC control | FANUC Series 300iS-Model A | | Rapid traverse | Up to 35 m/min | | Approximate machine weight | 2,200 kg, excluding bar feeder and ancillary equipment | ### Standard tooling layout - Six turning-tool positions for external turning, profiling, grooving and parting. - Five radial driven-tool positions for cross-drilling, milling and tapping applications. - Four front-working sleeve positions for end-working operations. - Four-position back-working station for machining components held in the sub-spindle. ### Included equipment - FMB Turbo 3-36 automatic magazine bar feeder for 3.2 m bar stock. - 140-bar high-pressure coolant system — approximately 2,000 psi. - LNS MH500 swarf conveyor, compatible with long-parts ejection. - JBS guide bush system. - TriMist Extraction - Noble fire suppression system. The combination of magazine bar feeding, high-pressure coolant and swarf handling provides a useful equipment package for repeat batch production and components requiring several machining operations. ### Machine hours Approximately 56,000 power-on hours. Cutting hours - 17,000 Available in the UK. Price on application, plus VAT. Contact Swiss CNC for pricing, machine videos, inspection arrangements and delivery or installation requirements. *Tooling layout describes the standard model configuration; the supplied toolholder package is subject to confirmation.*

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, total width: 2,500 mm, total length: 2,255 mm, total height: 2,500 mm, load capacity per storage section: 1,320 kg, SSI Schäfer DR20 flow rack – 26 bays available For sale is a used flow rack (box/piece goods flow rack) from the renowned manufacturer SSI Schäfer, type DR20, manufactured in 1995. Technical data: • Bay length: 2,255 mm • Bay width: 2,500 mm • Bay height: 2,500 mm • Bay load: 1,320 kg Tedpfx Aijz R Dhcerod Bay configuration: Variant 1 (9+9 bays): • 3 and 4 levels • 10 roller tracks + 4 dividers per level • Load capacity approximately 250 kg per level Variant 2 (8 bays): • 4 levels • 3 levels with a bent sheet metal slope for optimal product presentation • 10 roller tracks + 4 dividers per level • Load capacity 200–330 kg per level The racking system operates on the FIFO principle and is ideally suited for the dynamic storage and retrieval of boxes, containers, and small load carriers in picking, assembly, or shipping processes. Sales information: • Commercial sale • Invoice with VAT shown • Delivery and collection possible by arrangement • Location: 41564 Kaarst-Holzbüttgen • Total: 26 bays (partial quantities also possible – please inquire) The system is robust, reliable, and ready for immediate use. Ideal for companies looking for a cost-effective and functional flow racking solution.

Condition: used, axle configuration: 3 axles, first registration: 10/2026, color: other, Year of construction: 2018 Tjdpfx Ajz R Eizeired Empty weight: 4.850 kg Axle 1: left 12 mm right 12 mm Axle 2: left 10 mm right 10 mm Axle 3: left 9 mm right 9mm We have the possibility to stack trailers!

Condition: used, Pneumatic pick and place manipulator, loading unit similar to a SCARA robot with a parallel gripper. Handling device, handling system, pick-up gripper, loading gripper for automation. Horizontal axis with guide cylinder, linear module type SM 32/150 (column module GEMOTEC). Vertical axis with guide cylinder, linear module type SM 20/060 (column module GEMOTEC). Parallel gripper type GMP 20. Load capacity: max. 2 kg. Horizontal movement: 150 mm (pneumatic). Vertical movement: 60 mm (pneumatic). Vertical adjustment on the two support columns: 435 mm (manual, with clamping). Support columns, vertical guide column: Ø 45 mm. Guide column, linear module type SM 32/150: Ø 20 mm. Guide column, linear module type SM 20/060: Ø 12 mm. Tjdpez D Hxisfx Airod Mounting foot: 180 x 75 mm. - Can be moved pneumatically in two axes. - Part gripper, parallel gripper type GMP 20 (65 x 35 mm). Space requirement L x W x H: 550 x 160 x 550 mm. Weight: 17 kg. Very good condition. Various manipulators available, see our webshop.

Condition: not inspected (used), Year of construction: 2011, operating hours: 12,000 h, functionality: unexamined, machine/vehicle number: 1200 000043 7, TECHNICAL SPECIFICATIONS CNC control: Siemens Sinumerik 840D Number of axes: 5 axes Travels X-axis travel: 120 mm Y-axis travel: 120 mm Z-axis travel: 200 mm A-axis: -10° to +120° C-axis: 360° continuous Rotary table Diameter: 190 mm Maximum load: 10 kg A-axis speed: up to 100 rpm C-axis speed: up to 150 rpm Spindle Maximum speed: 40,000 rpm Power: approx. 6 kW Maximum power: approx. 7.7 kW Torque: approx. 1.6 Nm High-frequency spindle with ULTRASONIC technology Feed rates Rapid traverse X/Y/Z: up to 10 m/min Tools Tool holder interface: depending on machine configuration Maximum tool length: approx. 130 mm Maximum tool diameter: approx. 49 mm Todpfx Aisz Efpcsred Tool magazine: depending on configuration General data Power supply: 400 V Connected power: approx. 25 kVA Compressed air: approx. 6 bar Machine weight: approx. 1,800 kg TECHNOLOGY The DMG SAUER ULTRASONIC 10 combines high-precision 5-axis CNC machining with ultrasonic-assisted machining technology. This technology is particularly well-suited for machining difficult materials such as: Ceramics Carbide / hard metal Glass Corundum Technical materials and hard and brittle materials Machine particularly suitable for the micromachining, watchmaking, medical/dental, optics, and high-precision application sectors. Subject to errors and changes in technical data.

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 17,859 h, load capacity: 20,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: simplex, construction height: 3,900 mm, fork carriage width: 3,300 mm, fork length: 2,400 mm, empty load weight: 32,700 kg, total length: 5,900 mm, drive type: Diesel, construction width: 3,050 mm, Diesel Forklift Load Centre: 1200 Tsdpfoz Ev Nyjx Airod Fork Width: 200 mm Fork Thickness: 110 mm Mast Type: Standard Transmission: NEW Condition: Ready for use and fully functional Technical Condition: Very good Front Tyres Type: Pneumatic Front Tyres Size: 14.00-24 Rear Tyres Type: Pneumatic Rear Tyres Size: 14.00-24 Description: In addition to this Konecranes model, we have around 200 heavy-duty forklifts, compact forklifts, forklift trucks & side loaders in stock at our warehouses in Hamburg and Gdansk. Visit our homepage – sago-online. Leasing & financing at attractive rates are always available. We are also happy to purchase your used machine directly, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to provide detailed advice on this SMV20-1200B. P.S.: Our forklift master workshop specialises in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons upwards. We are also happy to offer your vehicle for consignment sale in our facility. Sideshift, fork positioner, Heater, full cab, air conditioning, NEW ENGINE AND TRANSMISSION

Condition: used, axle configuration: 3 axles, first registration: 09/2026, color: other, Year of construction: 1984 Empty weight: 6.800 kg Axle 1: left 1 mm right 1 mm Axle 2: left 10 mm right10 mm Tjdpfjzxri Eox Airsd Axle 3: left 8 mm right 8 mm We have the possibility to stack trailers!