Used Emcomat 20 D for sale (81,687)

Condition: excellent (used), axle configuration: 3 axles, first registration: 04/2021, suspension: air, color: black, Year of construction: 2021, Make axles: SAF Brakes: disc brakes Hedpjxu Ddgofx Adwofb Suspension: air suspension Rear axle 1: Lift axle Empty weight: 3.216 kg Carrying capacity: 40.784 kg GVW: 44.000 kg Technical condition: very good Visual appearance: very good

Year of construction: 2026, condition: new, functionality: fully functional, The laboratory extruder model EX20-25d is designed for small-scale material development, small batches, or filament extrusion. It has a plasticising capacity of 5kg/h. Our extruder model is designed with a bimetallic barrel and through-hardened screw, allowing for high-temperature processing (up to 400 degrees). This enables the processing of abrasive raw materials, engineering plastics, PEEK, metal compounds, ceramics, and fibre-reinforced materials. Hfedpfoiv H Ekex Adwsb Inspect available machines at our factory in Königswinter. We can also provide machines in other dimensions.

Condition: used, Year of construction: 2007, Technical details: turning diameter over bed: 340 mm turning diameter over slide rest: 190 mm turning length: 700 mm spindle turning speed range: 40 - 3000 U/min spindle bore: 50 mm Hjdpsx Apd Uefx Adwjfb

Condition: used, machine/vehicle number: WSK00000001246641, axle configuration: 3 axles, first registration: 08/2009, suspension: air, tire size: 385/65, tire condition: 40 %, color: other, Year of construction: 2009, Equipment: ABS, = Additional options and accessories = - ADR - Air Suspension - BPW Axles - Disc brakes Hfsdpfxoxp H Nhs Adwsb = More information = Tyre size: 385/65 Make axles: BPW Tyre profile: 40% Brakes: disc brakes Suspension: air suspension

Condition: used, Year of construction: 1998, x-travel 1700 mm y-travel 400 mm z-travel 400 mm table surface area 2x 1100 x 420 mm table load 500 Kg tool taper SK 40 control Sinumerik 810 D Siemens turning speed range - spindle 30 - 6000 U/min tool piece magazine with 20 Plätzen Working speed 1 - 30000 mm/min rapid traverse x / y / z axis 30 / 30 / 30 m/min total power requirement 20 kW weight of the machine ca. 5 t dimensions of the machine ca. 3,8 x 2,8 x 3,1 m Hsdjxddq Sepfx Adwefb

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Three phase transformer -Type: D 32/20 50/60 Hz 6000 VA -Primary: 3x 400 V -Secondary I: 1x 110 V 6 A -Secondary II: 1x 230 V 6 A -Secondary III: 3x 18 V 10 A -Secondary IV: 3x 66 V 30 A -Dimensions: 420/175/H430 mm -Weight: 80 kg Hedjfitflspfx Adwsfb

Condition: ready for operation (used), Year of construction: 1997, Max. workpiece length: 3600mm, max. workpiece width: 1400mm, length: 8750mm, width: 5250mm. Hedpfx Adeqvnl Tewefb

Condition: used, TECHNICAL DETAILS - Max. temperature : 950 [°C] - Max. inlet height : 10 [mm] - Heating distance : 1600 [mm] - Cooling length : 2600 [mm] - Conveyor belt speed : 0.4 - 3.2 [m/min] - Conveyor belt width : 150 [mm] - Nominal voltage : 400 [V] EQUIPMENT Hfedsug U Tzjpfx Adwjb - External cooling unit

Condition: new, Machine according to DIN 8605: lathe with increased accuracy. Tip width: 700 mm Peak height: 170 mm Circulating diameter over bed: 340 mm Circulating diameter over flat slide: 190 mm Bed width: 260 mm Laengs schlitten: 600 mm Shifting path cross slide: 220 mm Shifting path upper slide: 110 mm Flat slide: 410 mm Flat slide width: 150 mm Guide load-length bed slide: 380 mm Rotary chisel cross-section: 20x20 mm Center of rotation distance - Upper slide: 34 mm Swing range upper slide (Support): 60/120° Main spindle: Spindle connection DIN 55029 (Camlock): S 5 Spindle bore: 50 mm Inner cone according to DIN 7178: 1:22 Spindle diameter in the front bearing: dia. 70 mm Max chuck diameter: 200 mm Max. washer diameter: 200 mm Spindle speeds: 40-3000 rpm Speed control: Stepless mechanical speed levels: 4 Main drive: Power at 40% ED: 5.3 kW Max rated torque a. d.Main spindle: 640 Nm Feed: 20 (28) Laengsvorschuebe Z: 0.045-0.787 mm/U 20 (28) Plan vorschuebe X: 0.023-0.406 mm/U Thread: 20 (28) metric thread (basic): 0.4 - 7.0 mm 32 inch thread (with option Raed replacement D3Z200): 56 - 4 Gg/inch Hfjdpfx Adodctnbowob 28 Module thread (with option Raed replacement D3Z200): 0.2 - 3.5 32 diam. Pitch thread (with option Raed replacement D3Z200): 112 - 8 Tailstock: Pinole diameter: 50 mm Indoor cone of the pinole: MK 3 Pinole stroke: 120 mm Side adjustment: x 13 mm Zulessige Werkstueckweights

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Manufacturer: Greif, double grinding wheel type D 20/4 -Grinding discs: max. Ø 250 mm Hfodpfx Aov Hawqjdwjb -Motor power: 0.37 kW -Speed: 1400 rpm -Operating voltage: 220/380 volts -Dimensions: 500/310/H315 mm -Weight: 40 kg

Condition: excellent (used), EMCO Precision Lathe EMCOMAT 17 D Incl. 3-axis EMCO digital display Year of manufacture: 2007, with CE marking 2 units available! Centre distance: 700 mm Centre height: 170 mm Swing over bed diameter: 340 mm Swing over cross slide diameter: 190 mm Bed width: 260 mm Longitudinal slide travel: 600 mm Cross slide travel: 220 mm Top slide travel: 110 mm Cross slide length: 410 mm Cross slide width: 150 mm Bed carriage guide length: 380 mm Tool cross-section: 20 x 20 mm Distance spindle centre – top slide: 34 mm Top slide (compound rest) swivelling range: 60 / 120° Headstock: Spindle mount: DIN 55029 (Camlock) Spindle bore: 50 mm Internal taper to DIN 7178 1:22 Spindle diameter in front bearing: 70 mm Max. chuck diameter: 200 mm Max. face plate diameter: 200 mm Spindle speed: 40 – 3000 rpm Stepless speed control Mechanical speed ranges: 4 Main Drive: Power at 40% duty cycle: 5.3 kW Max. rated torque at main spindle: 640 Nm Feed: 20 (28) longitudinal feeds Z: 0.045–0.787 mm/rev 20 (28) cross feeds X: 0.023–0.406 mm/rev Threads: 20 (28) metric threads (basic equipment): 0.4 – 7.0 mm Tailstock: Quill diameter: 50 mm Quill taper: MK 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible workpiece weight (between centres): 50 kg, supported by tailstock: 150 kg Weight: 755 kg Dimensions: 1650 x 1060 x 1635 mm The EMCOMAT 17 D is a precision lathe designed for all areas of mechanical engineering and for training purposes. Equipment: • EMCO 3-axis digital display with colour screen • Potentiometer, EMERGENCY STOP button, digital speed display on control panel next to digital display • 3-jaw chuck • MULTIFIX toolpost head, size B • Electrically interlocked chuck guard • Quick-change collet device • MICROJET coolant spray device • Chip guard rear panel • Machine light • Machine feet • Bed stop Hfedjxx S R Ajpfx Adweb Condition: Very good, from a training centre "Due to its quality and price, the machine is not suitable for private individuals." Available from March 2026

Condition: excellent (used), mileage: 38,900 km, power: 188 kW (255.61 HP), first registration: 12/2022, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,250 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 8, emission class: euro6, total length: 9,750 mm, total width: 2,600 mm, loading space length: 74,000 mm, loading space width: 24,600 mm, loading space height: 26,000 mm, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, power assisted steering, power mirror, traction control, = Additional Options and Equipment = - Euro 6 - Height-adjustable steering wheel - Leather steering wheel - Air suspension - Front center armrest - Radio DAB MP3 Bluetooth 4.0 - Reversing camera - Sun visor = Remarks = Refrigeration unit brand: Carrier = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 7,698 cc Maximum front axle load: 7,500 kg Maximum rear axle load: 11,500 kg Weights Hsdjv I Tyujpfx Adwofb Unladen weight: 9,746 kg Payload: 10,754 kg Gross vehicle weight: 20,500 kg Functionality Temperature range: 20 °C to -20 °C Body manufacturer: ZUIDWIJK SUPRA 850 Reefer engine: diesel and electric Maintenance, History and Condition APK (Technical Inspection): valid until 05.2026 Technical condition: very good Visual condition: very good Identification Registration number: 32-BTP-9

Condition: used, Ferwood Code: RU0001121 - Condition: Used - Compatible Machine: CNC SCM - If interested we offer a revision service, contact us. Hfsdpfou U D N Ujx Adwob

Condition: used, Year of construction: 1998, functionality: fully functional, cooling capacity: 3.3 kW (4.49 HP), input voltage: 400 V, input frequency: 50 Hz, Oil Cooler – Inline Oil Cooler D20V D30V 2 Inline Oil Coolers – Cooling units for industrial machinery – available individually. Two standalone inline oil coolers / flow-through coolers for cooling oil/hydraulic oil, made by Wöhr Kältetechnik, suitable for cooling or temperature control of the coolant circuit or hydraulic system in machine tools. Each unit includes an integrated circulation pump and flow monitor. Built-in control cabinet inside the housing with connection cable, LAE temperature controller MTR11, and volt-free alarm contact in case of malfunction. The integrated circulation pump is a gear pump. These cooling units are designed for clean oil. A programming manual for the temperature controller is included. Both units are used and in good condition. Wöhr Inline Oil Cooler Type D 20 V, Year of manufacture: 1998, Serial No. 98101582, Cooling capacity: 2 kW, Refrigerant: R 404 a, with integrated circulation pump, operating voltage 400V, 50Hz, LAE controller MTR11, equipped with Walter Procon connector (previously installed on the hydraulic system of a grinding machine), dimensions approx. 80 x 75 x 110 cm, total power consumption 1.7 kW. Hfjdpfxsg U H E Sj Adweb Inline Oil Cooler D 30 V Wöhr Inline Oil Cooler Type D 30 V, year of manufacture 1998, Serial No. 98101583, cooling capacity 3.3 kW, refrigerant R 404 a, with integrated circulation pump, operating voltage 400V, 50Hz, LAE controller MTR11, equipped with CEE connection plug (previously installed on the grinding oil supply of a grinding machine), dimensions approx. 80 x 75 x 110 cm, total power consumption 2 kW. The oil coolers/cooling units are used but well maintained. Price / details on request. All technical details and specifications are subject to possible errors or misprints. Sales exclusively to countries within the European Community.

Condition: new, operating pressure: 2,000 bar, high-pressure hose length: 10,000 mm, fuel: diesel, overall weight: 243 kg, warranty duration: 24 months, temperature: 80 °C, TECHNICAL DATA OF THE KARCHER HDS 8/20 D WASHER: Model: HDS 8/20 D Series: Professional Condition: NEW Hjdpfxov Tafbs Adwofb Thread type: KARCHER !EasyLock series Drive: DIESEL engine Pressing capacity (l/h): 800 Working pressure (bar/MPa): 200 Maximum water temperature (°C): 80 Fuel consumption (kg/h): 5.9 Fuel tank (l): 30 Weight (kg): 243 Dimensions (length x width x height) (mm): 1130 x 910 x 920 EQUIPMENT OF THE KARCHER HDS 8/20 D WASHER: Pressure gun: Karcher Professional !EasyForce Advance High-pressure hose: Karcher Professional - Longlife series 10M, DN8, 315BAR - !EasyLock Spray lance: Karcher Professional 1050 mm !EasyLock Nozzle: Karcher Professional POWER pressure nozzle !EasyLock. 25° flat stream nozzle. Flat high-pressure stream with high surface efficiency and good dirt loosening force. RELIABLE | DURABLE | ERGONOMIC Economical diesel engine - independence from external power sources. Compliant with the requirements of the EU STAGE V emission standard. Electric start. Comfortable handle for easy maneuvering of the device. Durable frame protecting the device from damage. Possibility of transport by crane, e.g. on a construction site. Safety valve on the high-pressure pump and water filter. The water filter protects the pump from impurities in the water. Thanks to the operating parameters of 200 bar and 800 l/h flow, the device will cope well in all conditions, even the most difficult ones. Large, puncture-resistant wheels. SDS reduces pressure pulsations in the high-pressure system of the device and thus extends the life of all pump elements on the high-pressure side. EASY!Force technology reduces the force needed to hold the gun trigger to zero. The device also has an EASY!Lock equipment mounting system that allows 5x faster equipment change than a traditional thread system. The device is completely new and factory-packed

Condition: excellent (used), Year of construction: 2020, operating hours: 5,672 h, lifting height: 4,860 mm, mast type: triplex, power: 29 kW (39.43 HP), motor manufacturer: Volkswagen, total height: 2,200 mm, total length: 2,600 mm, total width: 1,180 mm, color: other, Equipment: air conditioning, seat heater, Year of manufacture: 2020 Empty weight: 3.810 kg Lifting capacity: 2.000 kg CE mark: yes Technical condition: very good Visual appearance: very good Drivetrain Internship / Tier: Stage IV / Tier IV final General Country of production: Germany Condition CE type: CE Hedex Hawpspfx Adwsfb Side shift and 4th valve, roof protection guard, air conditioning

Condition: used, mileage: 1,80,493 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: mechanical, first registration: 06/2018, emission class: euro6, color: black, number of seats: 20, Equipment: ABS, air conditioning, parking heater, +++Damage on the right+++ +++new engine 11/24+++ Engine: VW Euro standard: Euro 6 Gearbox: Manual Seats: 19+1 sleeping seats with 3-point belts Safety * Cruise control * ABS, ASR, EBS * Fog lights * Immobilizer * Rear view camera * Multifunction steering wheel Passenger compartment * Auxiliary heating * Wood floor look * Automatic climate control * Luggage racks * Luggage nets * Jet ventilation * Reading lamp * Refrigerator * Leather headrest inserts * Driver microphone Exterior * Power steering * Tachograph with card * Sun visor * Electric exterior mirrors * Driver's door * Central locking * Roof hatches, fans, roof vents Audio & communication * Radio Other * Vehicle dimensions: Length: 7.36 m, width: 1.93 m, height: 2.90 m * Tires: Front: approx. 50%, Rear: approx. 50% * Our internal vehicle number: 11314 Hjdsvy Rdbspfx Adwofb Errors excepted. Images and text may differ from the vehicle. Over 300 vehicles always on offer.

Condition: good (used), mileage: 79,700 km, power: 180 kW (244.73 HP), first registration: 06/2023, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,000 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 8, emission class: euro6, total length: 9,490 mm, total width: 2,550 mm, total height: 3,660 mm, loading space length: 75,000 mm, loading space width: 24,800 mm, loading space height: 25,500 mm, Year of construction: 2023, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, power assisted steering, power mirror, spoiler, tail-lift, traction control, = Additional Options and Equipment = - Bluetooth hands-free system - Roof hatch - Roof spoiler - Euro 6 Hodpfewfqmxex Adwofb - Remote central locking - Cruise control - Height-adjustable steering wheel - Air suspension - Disc brakes - Side door - Sun visor - Immobilizer - Daytime running lights = Further Information = Technical specifications Number of cylinders: 4 Engine displacement: 5,132 cc Front axle: Max. axle load: 4,480 kg; Steering Rear axle: Twin tires; Differential lock; Max. axle load: 8,480 kg Weights Unladen weight: 7,385 kg Payload: 4,615 kg Gross vehicle weight: 12,000 kg Functional Tail lift: D'HOLLANDIA, tailgate, 2,000 kg Maintenance, History and Condition APK (MOT): valid until 06/2026 Technical condition: good Optical condition: good Identification Registration: BB-709-J

Condition: good (used), Year of construction: 2006, EMCO EMCOMAT 14 D Lathe EMCO EMCOMAT 14 D with Emco digital readout, year of manufacture 2006, in excellent original condition. The machine comes from the special production department of a renowned German mechanical engineering company. CE-compliant! Technical data: Year of manufacture: 2006 EMCO EMCOMAT 14 D Technical Data Working Area Travel distance in X/Y/Z: 135 / - / 590 mm Centre distance: 650 mm Centre height: 140 mm Hedpjxyvbnsfx Adwjfb Main spindle Max. speed: 4,000 rpm Spindle mount: Size 4 (DIN 55029) Max. drive power: 7.5 kW Tailstock Quill diameter: 30 mm Internal taper: MK 2 Quill stroke: 80 mm Dimensions (LxWxH): 1,280 x 730 x 1,480 mm Machine weight: 420 kg About the machine: The EMCOMAT 14D is the smallest machine in the EMCOMAT series. The EMCOMAT 14D is a lathe designed for the highest demands: with stepless speed control, constant cutting speed, and a robust 7.5 kW drive power (40% duty cycle). The compact machine with outstanding performance is ideal wherever maximum precision in limited space is required, such as optical, electrical, and automotive workshops, laboratories, and even Formula 1. Offered here is a lathe EMCO EMCOMAT 14 D with Emco digital readout, manufactured in 2006. This lathe is in excellent original condition. It was only used occasionally in special production. The control system is very user-friendly. The guides are regularly lubricated by a central lubrication system. The EMCO EMCOMAT 14 D has been mechanically and electrically tested by us. You are welcome to inspect and test the EMCO EMCOMAT 14 D under power at our premises. You will find further lathes from renowned manufacturers on our website.

Condition: ready for operation (used), machine/vehicle number: 17331, grinding area: 200 x 35 mm electrical connection: 380 V, 0,55 kW Hfoded Ixbcjpfx Adwsb space needed: 530 x 400 x 1180 mm weight:

Condition: excellent (used), functionality: fully functional, Emcomat 17D Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C New from Training Workshop Excellent Condition!!! Technical Data: Hedjwvuf Tepfx Adwofb >> Year of manufacture: approx. 2000 >> Machine no.: D3F H1 010 >> Centre height: 170 mm >> Swing over bed: 340 mm >> Swing over cross slide: 190 mm >> Turning length: 700 mm >> Spindle speed: 4 speed ranges, stepless from 35 to 3000 rpm >> Tailstock quill stroke: 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 – 0.787 mm/rev >> 20 cross feeds: 0.023 – 0.406 mm/rev >> Required floor space approx. (L x D x H): 1.600 x 0.9 x 1.3 meters >> Weight: approx. 730 kg Equipment and Accessories: >> 3-axis digital readout from K&C, new, with 12 months manufacturer’s warranty and operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 piece three-jaw chuck NEW 160 mm, 2 sets of jaws >> Multifix B toolholder with 2 tool pockets >> Chip guard >> Coolant system About the machine: Offered here is an Emcomat 17D lead and feed screw lathe, approx. year 2000, in very good condition. The machine is of course fully functional. The bedways are in excellent condition. The Emco is equipped with a new 3-axis digital readout from K&C and a new three-jaw chuck. Take the opportunity to inspect the machine under power on site and see the condition for yourself.

Condition: used, Hydraulic cylinder, synchronous cylinder, steering cylinder -Piston diameter: 38 mm -Piston rod: Ø 16 mm (M12 thread) -Stroke: 20 mm -Dimensions: 234/89/H50 mm -Weight: 3 kg Hfjdedkf I Tspfx Adwob

Condition: used, Year of construction: 2000, Overview This bottle washer from the German manufacturer Klinger was built in 2000. The washer is made entirely of stainless steel, has a Siemens S7 control, 2-fold heaters and surge pumps for high cleaning performance. Technical details Capacity: 9,600 bph;   20 bottles per row Scope of delivery bottle washer | Klinger | Euro Class-D 20/1/73 | 2000 water treatment plant | Hager + Elsässer | 2000 incl. cation and anion exchanger, incl. salt container, pre-filter and UV probe with a capacity of 5 m3/h and  The water treatment system was designed to operate the bottle washer and the RO system RO reverse osmosis plant | Hager + Elsässer | 2000  with full desalination capacity of 2.5 m3/h Hfedpfetxd A Sex Adwsb

Condition: good (used), Year of construction: 2006, EMCO EMCOMAT 14 D Lathe EMCO EMCOMAT 14 D with EMCO digital readout, year of manufacture 2006, in excellent original condition. The machine comes from the special construction department of a renowned German mechanical engineering company. CE compliant!! Technical Data: Year of manufacture: 2006 EMCO EMCOMAT 14 D Technical Data Working area Travel in X/Y/Z: 135 / - / 590 mm Centre distance: 650 mm Centre height: 140 mm Main spindle Max. speed: 4000 rpm Spindle mount: Size 4 (DIN 55029) Max. drive power: 7.5 kW Tailstock Quill diameter: 30 mm Inner taper: MT 2 Quill stroke: 80 mm Dimensions (LxWxH): 1280 x 730 x 1480 mm Machine weight: 420 kg About the Machine: The EMCOMAT 14D is the smallest machine in the EMCOMAT series. The EMCOMAT 14D is a lathe designed for the highest standards: with infinitely variable speed control, constant cutting speed, and a robust 7.5 kW drive (40% duty cycle). This compact powerhouse excels wherever maximum precision is required in limited space, such as in optical, electrical, and automotive workshops, laboratories, and even in Formula 1. For sale is an EMCO EMCOMAT 14 D lathe with EMCO digital readout, year of manufacture 2006. This lathe is in excellent original condition. It comes from a facility where it was only lightly used for special construction purposes. It features an extremely user-friendly control. The ways are regularly lubricated by the central lubrication system. The EMCO EMCOMAT 14 D has been mechanically and electrically tested by us. Take the opportunity to view and test the EMCO EMCOMAT 14 D under power on-site. Hfedpoxyvbbefx Adweb You will find more lathes from well-known manufacturers on our website.

Condition: good (used), Year of construction: 2006, EMCO EMCOMAT 14 D Lathe EMCO EMCOMAT 14 D with Emco digital display, year of manufacture 2006, in excellent original condition. The machine comes from the special production department of a renowned German mechanical engineering company. CE compliant!! Technical specifications: Year of manufacture: 2006 Model: EMCO EMCOMAT 14 D Technical Data Working area Travel in X/Y/Z: 135 / - / 590 mm Centre distance: 650 mm Centre height: 140 mm Main spindle Max. speed: 4000 rpm Spindle mount: Size 4 (DIN 55029) Max. drive power: 7.5 kW Tailstock Quill diameter: 30 mm Internal taper: MT 2 Quill stroke: 80 mm Dimensions Dimensions (LxWxH): 1280 x 730 x 1480 mm Machine weight: 420 kg About the machine: The EMCOMAT 14D is the smallest machine in the EMCOMAT series. The EMCOMAT 14D is a lathe for the highest demands: with stepless speed control, constant cutting speed and an impressive 7.5 kW drive power (40% duty cycle). This compact machine with outstanding performance is ideal wherever maximum precision is required in limited spaces, such as in optical, electrical, and automotive workshops, laboratories, and even Formula 1. Hfsdpexyvaqofx Adwjb Offered here is an EMCO EMCOMAT 14 D lathe with Emco digital display, year of manufacture 2006. This lathe is in excellent original condition and comes from a facility where it was only used occasionally for special applications. The control system is very user-friendly. The guideways are lubricated regularly by a central lubrication system. The EMCO EMCOMAT 14 D has been mechanically and electrically tested by us. Take the opportunity to view and test the EMCO EMCOMAT 14 D under power at our premises. You will find more lathes from renowned manufacturers on our website.