Used Ultrasonic Welding Machine for sale (66,601)

Condition: ready for operation (used), throat depth: 550 mm, Output: 25 kVA Design size: 550 mm Tedpfjyk S Utsx Airjd

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system, pulse welding system Tjdpfjx Hi I Djx Aired -Manufacturer: Ess, MIG/MAG welding machine -Type: Pulsarc 350 -Max. welding power: 350 A -Water-cooled -Wire feeder case: ESS DVK 400 4-roller drive -Dimensions: 970/670/H1040 mm -Weight: 209 kg

Condition: used, current capacity 8,0 kVA throat 80 - 480 mm contact pressure capacity 17 - 235 daN horn spacing 140 mm mm rated capacity 8,0 kVA voltage 380 V total power requirement 17,8 kVA weight of the machine ca. 77,5 kg Todpfxjz Sdy Ne Airsd dimensions of the machine ca. 0,35 x 0,80 x 1,05 m - Serial-No.: 18310126 - 2

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Only a few operating hours (approx. 6,800 hours). Usable heating element area: width 600 mm x depth 400 mm Max. workpiece dimensions: - Max. width: 620 mm - Max. depth: 420 mm - Max. upper height: 350 mm - Max. lower height: 350 mm (Combinations of part heights possible, depending on contour) - Max. processing temperature for contact method: 400°C The modular frame design allows for easy conversion and retrofitting. The side doors and the front door in the welding area can be easily opened (for rapid retooling). Tjdpfoykvdlox Aired The automatic safety lift door ensures a high level of operator safety. The temperature control units on the operator panel have actual/target displays. The control device is a Siemens PLC HMI. The machine is controlled by a Siemens PLC (S7-300 controller). Heating elements are equipped with temperature sensors for temperature regulation and serve as safety cut-offs in case of overheating. The pin systems in the tool mounting surfaces ensure reproducible positioning. Advantages of heating element welding technology: - Reliable welding of workpieces with low or varying wall thicknesses. - Low scrap rate due to dimensionally accurate and repeatable welds. - Precise time, temperature, and force control enable welding of sensitive parts. - Virtually all thermoplastics can be welded with this process. - Different thermoplastic types can be joined (compatibility needs to be verified). Technical data of the machine: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 cables, each 6 mm² - Required pneumatic connection: 6 bar Machine dimensions: - Machine width: approx. 1.22 m - Machine width with operator panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with operator panel: approx. 2.6 m - Machine height: approx. 2.4 m - Machine height with raised safety door: approx. 2.85 m (open door) Machine weight: approx. 2.2 t

Condition: used, throat depth: 420 mm, nominal power at 50% duty cycle: 60 kVA, input voltage: 400 V, type of cooling: water, nominal power (apparent): 14 kVA, Spot welding machine, Type 8003 TECNA – for welding nuts and sheet metal – completely overhauled and tested. Rated voltage: 400V Rated power: 60 kVA at 50% duty cycle Short-circuit current: 22 kA Welding current: 17.6 kA Fuse rating: 125A Outreach: 420mm Tsdeh N Sd Uspfx Aired Electrode force: 470 daN Cylinder with pre-stroke Total stroke: 80mm Double stroke: 60mm Electrode cone: MK2 Lower console, height-adjustable by approximately 300mm Welding control unit TE 180 with digital display of welding current, current rise, etc. Main switch on the control cabinet - new 2-stage foot switch according to UVV regulations - all pneumatic and water hoses replaced - electrode holder new - original documentation / operating manual available - machine inspection with confirmation valid until 09/2026 - weight approximately 330kg Demonstration and inspection by appointment only. Commissioning and training at the customer's site possible for an additional charge. The machine is located in Dresden, near the A17 motorway. And we also have a suitable cooling unit in stock – of course, for an additional charge ;-)

Condition: used, total power requirement:6,5 kW Tedj Ad Siyepfx Airod dimensions of the machine ca.:0,9 x 0,5 x 1,25 m

Year of construction: 1988, condition: used, Offered is a high-frequency welding press with film feed. Equipped with: press unit, hydraulic power unit with electric motor, control panel with switches and indicator lights, worktable with film guide, side-mounted roll holders, film unwinding unit and separate electrical cabinet. Inspection possible by appointment. Tjdpfe Adt Eiex Airjd

Year of construction: 2010, condition: used, Double-head PROFTEQ SA 22 welding machine, manufactured in 2010, designed for welding PVC profiles used in the production of windows, doors, frames and sashes. The machine is equipped with two welding heads, one fixed and one movable, allowing both right-angle and variable-angle welding operations. The fixed head performs welding at 90°, while the movable head allows variable-angle welding from 45° to 180°, providing greater versatility in window and door manufacturing. The welding cycle is automatic and includes the heating, melting, joining and cooling phases of the profiles. Technical Specifications Manufacturer: PROFTEQ Model: SA 22 Year of manufacture: 2010 Machine type: Double-head welding machine for PVC profiles Number of welding heads: 2 Fixed head: 90° welding Movable head: Variable-angle welding from 45° to 180° Welding cycle: Automatic Minimum weldable profile height: 35 mm Maximum weldable profile height: 190 mm Maximum weldable profile width: 150 mm Power supply: 380 V Frequency: 50 Hz Installed power: 4 kW Pneumatic pressure: 8 bar Weight: 1,000 kg Overall Dimensions Length: 3,800 mm Depth: 1,100 mm Height: 1,900 mm Features and Equipment Two welding heads for processing PVC profiles. Movable welding head for variable-angle welding operations. Pneumatic profile clamping system. Heating plates for melting the surfaces to be welded. Todpfxs Abbbas Airjd Welding bead limitation system. Dedicated control panels for each welding head. Adjustable welding parameters, including temperature and processing times. Automatic welding cycle.

Condition: new, Year of construction: 2010, functionality: fully functional, PMF 465 CE We offer for sale a high-quality, professional band pressing machine (thermal laminator) from the German manufacturer PMF GmbH Maschinenfabrikation. The unit is brand new, never used (so-called NOS – New Old Stock), and is in perfect technical and visual condition, still placed on its original transport pallet. PMF machines are highly regarded in Western Europe for their uncompromising precision, durability, and highest quality, in accordance with the Made in Germany standards. Model 465 is widely used in the footwear industry (reinforcing and joining upper parts), in the leather goods industry, in the garment industry, and in the automotive industry. An automatic conveyor belt ensures smooth and consistent material feed in the working area. A digital microprocessor temperature controller (accurate thermal stabilization) is coupled with two independent timer programmers for precise setting of the pressing time and transport time. Tsdpfx Aoz Sxbmeirsd A pneumatic clamping system is activated by means of an ergonomic, two-button foot pedal. The machine is equipped with a side air preparation unit (regulator with pressure gauge). A spacious work table with four independent, contoured auxiliary shelves for the operator, facilitating the handling of large or complex parts (e.g., uppers, patterns). Complete protection of the hazardous area: front and rear covers made of plexiglass, a metal perforated cover for the heating unit, and an easily accessible emergency stop button. The unit has a full CE certificate. Price for the machine is negotiable. Transportation to the customer is possible. If you have any questions, please do not hesitate to contact us.

Year of construction: 1996, condition: good (used), machine/vehicle number: 01049, Offer 22461 Technical data: - Rated power at 50% duty cycle 35 kVA - Max. welding power 75 kVA - Adjustable overhang 280 to 600 mm - Stroke 5 to 50 mm - Welding parameters, steel sheet approx. 4 + 4 mm - Electrode force adjustable up to 44.5 daN - Cooling water flow rate 4 l/min - Connection 400 V Todpfeimbmrex Airod - Space requirement approx. W 800 x H 1700 x D 1050 mm - Weight approx. 220 kg - Including: - Single-phase control unit T 90 Mark II - Foot switch

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system, welding machine -Manufacturer: Messer Griesheim, MIG/MAG gas-shielded welding machine -Type: Euromag 25-2 -Max. welding power: 250 A -Wire feed: 4-roll drive, separate, mobile -Accessories: Hose assembly, ground cable (see photos) -Dimensions: 970/490/H890 mm Tjdpfxoz A R R Tj Airjd -Weight: 168 kg

Condition: used, SONOTRONIC ECO 35 Ultrasonic Welding Press. It is typically used for ultrasonic welding of thermoplastic parts. At the top is the pneumatically actuated ultrasonic head with converter, booster, and sonotrode; the workpiece is fixed on the base plate in a suitable fixture. Tjdpfxozcvuhe Aired Important: Operation usually requires an external 35 kHz ultrasonic generator, a suitable sonotrode, and a workpiece fixture. Only the connection or booster is present at the bottom of the head; the actual workpiece-specific sonotrode is missing. The device is from 1998 and, according to the nameplate, operates at 230 V. Before commissioning, electrical safety, pneumatics, two-hand release/emergency stop, and safety devices should be checked.

Condition: used, MIG MAG welding machine, gas-shielded welding unit CLOOS, type GLC 403 PA-TS Tsdpjzugnzofx Airjd Manufacturer's No. 8198, Year of manufacture 1994 Rated power 400 amps Power 400 amps - 60% duty cycle 310 amps - 100% duty cycle Adjustment range: stepless Connection hose package: 4.5 meters Mains connection: 380 volts, 50 Hz, 32 amp plug - 2-cycle and 4-cycle welding unit - External wire feeder, type CK 72/5TSZK with 2-roller drive and 4.5-meter hose package - 4-meter hose package with central connection and EHRIG hand torch, type Senator-800-D - Water-cooled - Pressure gauge for gas cylinder - Welding unit equipped with 1 mm welding wire Space requirement L x W x H: 1250 x 600 x 1100 mm Weight: 300 kg Good condition

Condition: used, Year of construction: 1978, functionality: fully functional, sheet width . mm Tedpfx Aijucgvaorsd plate thickness . mm serial number 20719 total power requirement . kW weight of the machine ca. 1,4 t

Condition: good (used), Arm design: 270 mm Power: 125 kVA Tsdpfx Aopy Dy Eeirod

Condition: excellent (used), Parallel-operated, water-cooled spot welding machine Manufacturer: DALEX, Model: PL 63-1 Rated power at 50% duty cycle: 63 kVA Secondary short-circuit current: 31.5 kA Secondary open-circuit voltage: 7.04 V Electrode force: 390 daN Reach: 250-550 mm Tjdpfxozrupze Airsd Arm distance: 150 or 310 mm with mounting control cabinet according to VDE 0113 Main switch Synchronous welding control 15036

Condition: like new (used), Year of construction: 2023, functionality: fully functional, EWM Phoenix 452 Puls Multimatrix Mig Mag welding machine Year of manufacture: 2023. unused still in original packaging. Tsdpfx Astkuvxoirod

Year of construction: 2013, condition: ready for operation (used), A Rehm Invertig Pro 350 AC DC and a Rehm Invertig Pro 450 DC are available, used and in good condition. 1) Invertig Pro 350 AC DC, standards: IEC 60 974-1 IEC 60 974-2, welding current range TIG: 3-350A, output voltage U₂ at maximum current: approx. 24V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent for TIG at 350A, mains voltage input: three phase 400V 50Hz, protection class: IP23S, protection category: S, setting range: 3-350A for TIG in this AC DC version, duty cycle 100 percent at 40°C 350A for TIG 100 percent duty cycle, input fuse protection: 32A at 3x400V for the 350 AC DC version, length: 520mm, width: 360mm, height: 460mm, weight: 29.5kg for AC DC version. 2) Invertig Pro 450 DC, standard: IEC 60 974-1, welding current range TIG: 3-450A, output voltage U₂ at maximum current: approx. 28V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent at 450A TIG, lower for electrode welding approx. 60 percent, mains input: 3x400V 50Hz, protection class: IP23S, duty cycle at 100 percent 450A TIG at 40°C, electrode welding current approx. 360A at 100 percent duty cycle for electrode in the 450 DC version, input fuse protection: 32A at 400V three phase for 450 versions, length: 520mm, width: 360mm, height: 460mm, weight: approx. 28kg. An on-site inspection is possible. Todpfxexddamj Airjd

Condition: excellent (used), Year of construction: 2011, Four-head welding machine URBAN, type AKS 6410/4, from left to right, maximum welding dimensions: 3,500 x 3,000 mm, WINDOWS control, weld bead limitation of 0.2 mm for colored profiles, pressure bar for sealing, designed for single-shift operation, technically overhauled and fully functional. Tsdpfsz Dk Nlsx Airod Includes cooling table, L = 3.0 m, TBA (URBAN conveyor belt).

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Water-cooled, pneumatic spot welding tong Nimak L193 TB. Very good used condition, fully functional. Item located in 75053 Gondelsheim. See photos. Shipping by forwarding agent or collection. Tsdpfxexmuypo Aired

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 101 S PVC Tek Köşe Kaynak Makinası, - Conforms to CE standards. - Weldable angle : All angles between 25 - 180 degrees. - Welded profile maximum height 150 millimeters - Minimum height of welded profile 40 millimeters - Upper pistons are individually compressible Tedpfx Aiora Niasrjd - Left moving table system available - Profile clamping is practically done with the pedal - PLC control system available - The heating unit has thermostatic control - The degree of the heating plate can be easily changed via the digital display - Heat temperature, welding time and pressure can be adjusted for different profile types - Time saving thanks to easy mold change system.

Condition: used, Working range: 1250x2250mm, max. feed speed: 48m/min, welding range: M3-M8, welding diameter: 3-8mm, stud length: 8-40mm, max. welding capacity: 30-40studs/min, max. feed: 48m/min, positioning accuracy: +/-0.2mm, length: 2400mm, width: 2700mm, height: 3100mm, the machine has been used very little and is in good condition. An on-site inspection is possible. Tjdpfxozxr N Se Airod

Year of construction: 2005, condition: good (used), machine/vehicle number: 412060, Offer 23001 Technical data: - Grooving width: 1 – 15 mm - Cutter head with reversible cutting inserts - Grooving angle: 30° - 37.5° - 45° - 60° - Power supply: 220 V / 1100 W - Dimensions (approx.): W 450 x D 300 x H 350 mm Todpfx Aei Ab Uneirjd - Weight (approx.): 20 kg - Transport case

Condition: not inspected (used), for sale in the condition shown in the picture. Tjdpsh Ti R Nefx Airsd

Year of construction: 2018, condition: ready for operation (used), Number of heating cartridges: 24, heating cartridge average and length: 12.5mm/200mm, power: 630W, 230V, including resistance thermometer type PT100, heating time to 350°: 40min. Dimensions X/Y/Z: 1900mm/2100mm/3040mm, weight: approx. 2200kg. Documentation available. Tsdetp Nacspfx Aired