Used Universal Ironworker for sale (3,545)

Condition: good (used), Year of construction: 2009, x-travel 760 mm y-travel 350 mm z-travel 500 mm Table dimensions 1300 x 320 mm feed - longitudinal/cross 0-3000 mm/min feed range - vertical 1200 mm/min spindle taper ISO 40 spindle turning speed range 55-3000 U/min diameter of quill 90 mm spindle stroke 90 mm total power requirement 7,5 kW weight of the machine ca. 2,3 t dimensions of the machine ca. LBH 2,2 x 1,8 x 2,0 m Includes HEIDENHAIN ND 780 position readout Tjdpjxpxt Eofx Abzsd Includes automatic tool clamping Includes counter bearing Includes work light Includes tool holder studs Includes automatic central lubrication Includes coolant system (pump/reservoir missing) Includes documentation Digital display for feed without function

Condition: good (used), Year of construction: 2006, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, table width: 1,000 mm, table length: 600 mm, table load: 500 kg, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 24, Equipment: chip conveyor, Accessories: Approx. 40x SK-40 tool holders (without cutting tools) Operating hours: 32,379 h (as of July 9, 2024) Todpfx Aexcpkzobzed Spindle running time: 15,674 h (as of July 9, 2024) Clamps on table are not included! Machine available from: Imediately

Condition: new, with pneumatic clamping device. The universal assembly station for the production of wall, ceiling and roof elements in timber frame construction,ceiling and roof elements in timber frame construction. - Heavy-duty, basic structure of the machine frame for a flat work surface - Clamping of the elements via 9 system clamping beams with pneumatic pressure cylinders. The system clamping beams are extendable for element heights from 100 to 3,800 mm. The cylinder stroke is 320 mm, the clamping force per cylinder is approx. 420 kg/4,200 N. at 10 bar operating pressure It can be clamped in two groups of 5 pieces and 4 pieces, two elements can be clamped/worked on at the same time. - Planking of the work surface as far as technically possible with wooden panels. (A perforated metal panel is available as an option, as shown in the photo)) - Stop system at the bottom with 9 pins and at the side with 7 pins for dimensionally accurate elements. - Swivelling device of the assembly station via 3 hydraulic cylinders for panel weights up to panel weights of up to 4,000 kg to 85° (95°). The hydraulic system is compactly integrated in the frame area of the assembly station. - The electrical control cabinet is also installed underneath the assembly station for protection. Tsdpfx Abswv Tqbozsd - The functions are operated via a control bottle. - A compressed air connection and socket are installed on both ends of the station. and on the long side of the station there are 2 sockets and 2 compressed air connections compressed air connections for connecting hand-held devices. - The stations are modular in design, so that they can be expanded immediately or later with a to form a complete turning station. You can see a turning station in picture 3. - Further options: Assembly table without set-up function Perforated metal panels Other working dimensions on request Working area: - Maximum element size (W x H): 12,000 x 3,800 mm - Minimum element size (W x H): 1,000 x 100 mm - Cylinder stroke of the clamping cylinders: 320 mm - Stop/ socket pin height: 120 mm - Working height: approx. 700 mm - Colour RÁL 7035 light grey

Condition: like new (used), Year of construction: 2020, operating hours: 110 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 700 mm, DMG Mori Seiki LaserTec 50 FineCutting Sauer CNC Laser Precision Machine Year/Model: 2019 Control: Celos with Siemens 840D sl Operate CELOS with Siemens 840D sl Operate including 21.5" ERGOline control panel with multi-touch screen CNC laser precision machine with high-speed machining LASERTEC 50 FineCutting for fine laser cutting, laser drilling, laser welding NC swivel rotary table, highly dynamic and precise Todpfxsxmvr Ts Abzod Travel paths: 500 mm x 500 mm x 700 mm Integrated ytterbium continuous wave (cw) fiber laser 450 W QCW ytterbium fiber laser with 4500 W pulse peak power and 450 W average power Processing head (80 mm focal length), 5-axis transformation 100 working hours (as new) Included: Fanuc robotic automation + Keller automatic extraction system

Condition: used, x-travel 400 mm y-travel 200 mm z-travel 400 mm Todjxqrdtspfx Abzed No. of spindle turning rate 18 speeds 40 - 2000 U/min table surface area 730 x 240 mm tool adaptor SK 40 flute distance 4 / 12 mm number of feeds 18 feed range 8 - 400 mm/min rapid traverse 1200 mm/min total power requirement 2,2 kW weight of the machine ca. 1400 kg dimensions of the machine ca. 1700 x 1400 x 1700 mm - Robust/powerful universal milling machine - NEWALL digital display - Coolant device

Condition: used, Year of construction: 2010, travel -x axis 730 mm travel -y axis 560 mm travel -z axis 560 mm B-axis swival range ° control Siemens 840 D SL number of spindle speeds 12.000 U/min numbers of positions in the tool changer 24 tool taper SK 40 table dimension (L x W) 1.000 x 600 mm NC rotary table diameter 600 mm 5-axis simultaneous machining center | DMG - DMU 60 monoBlock equipped with ITC (20bar), a 24-way tool changer, infrared measuring probe and chip conveyor. Todpjxqrgbefx Abzed Additional equipment information: - NC swivelling head B-axis - NC rotary table C-axis integrated in the fixed table The machine has 9.000 H spindle hours. The machine is in a well-maintained condition and can be inspected at any time under power. The machine videos from the production plant will be shared on request. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DMU60monoBlock | DMU60 monoBlock | DMU60 | 60 monoBlock

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 122000029, spindle motor power: 7,000 W, 5-AXIS PROFILE MACHINING CENTER ALU | PVC | STEEL Profile Machining Center SBZ 122/75 5-axis version for metal construction customers and industrial users • For efficient and economical machining of aluminum, plastic, and thin-walled steel profiles • All operations such as milling, drilling, and thread cutting are performed with the profile bar stationary to protect the profile surface • Continuously adjustable A-axis positioning from -120° to +120° • Continuously adjustable C-axis positioning from -220° to +220° • All five axes can be run simultaneously via RTCP (Rotation Tool Center Point) • Additional C-axis allows for frontal machining from both the left and right sides • Linear guides for autonomous fixture displacement • Work results improved by intelligent control systems • Rapid positioning of the machining unit at up to 120 m/min. enabled by dynamic servo drives • Thread cutting without compensation chuck Tedpfxexrbcze Abzsd • The 2-axis unit with A- and C-axis can accommodate a 180 mm diameter saw blade • Automatic clamp detection and positioning • Ergonomic operation thanks to modern slant bed design • Automatic tool changer with twelve tool storage slots (tools not included) • Modern 5-axis CNC control • No homing run required for the main axes due to use of absolute encoder systems • Collision avoidance through automatic clamp detection and positioning • Power-torque milling motor with closed-loop speed control for short spindle acceleration and deceleration times • Certified, drive-integrated safety functions • Low power consumption thanks to intelligent control engineering • Enhanced energy efficiency through DC bus coupling of the axis drives • Uninterruptible power supply (UPS) • Windows operating system • 18.5" panel PC, i5 processor, USB ports and network connectivity • Simple and user-friendly programming via eluCam at the operator terminal, even during operation • Remote maintenance via Internet

Condition: ready for operation (used), Year of construction: 2018, General Data Measurements width 4170 mm Measurements depth 4410 mm Measurements height 3540 mm Machine weight 12250 kg Control Unit Brand SIEMENS Model 840D SL Main Drive Spindle speed range 10000 Todpfxjxrwgcj Abzod Tool taper ISO 40 Number of axis 5 Movement X-Axis Movement 700 mm Y-Axis Movement 740 mm Z-Axis Movement 550 mm This 5-axis Huron UMILL 6 was manufactured in 2018. It features a Siemens 840D SL CNC, X Y Z travel of 700 x 740 x 550 mm, and a rotation speed of 10,000 rpm. The spindle power is 18 kW with an ISO 40 taper. It includes a 30-tool changer, chip conveyor, and a table diameter of 630 mm. If you are looking to get high-quality milling capabilities, consider the Huron UMILL 6 machine we have for sale. Contact us for more information. Application Types Milling

Condition: excellent (used), functionality: fully functional, Machine type: Universal rotary/tilting/swiveling table with dividing head Manufacturer: Hermle, Deckel, Mikron Condition: very good Type of offer: used machine component Technical data: Note: Size: 670 x 395 mm Mounting size: 480 x 220 mm Tsdexpwbuepfx Abzsd #### ATTENTION: SPECIAL PRICE DUE TO BUSINESS CLOSURE #### The component is in very good and immediately ready-for-use condition and can be inspected at our facility. We would be pleased if our offer is of interest to you. Subject to errors, changes, and intermediate sale.

Condition: excellent (used), Year of construction: 2012, Type: Qbo120-3-316-SGPV Serial number: 2304023123006 Year of construction: 2012 Bowl: 120 litres Speed: 0 - 2000 RPM Infeed height: 1450 mm Heating: steam, 160 kg/h Tjdpfx Abevtfltszod Compressed air: 6-8 Bar, 20 l/min Power: 3 x 400V, 50Hz, 22kW Dimensions: 1800 x 1750 x 1800 mm Weight: 900 kg With automatic mixing, vacuum, double jacket and steam injection Automatic lid and tilting

Condition: good (used), Year of construction: 1995, functionality: fully functional, Control: SIEMENS 840D Solution Line (electrical overhaul 2017) Tsdpfx Abjxphm Uszjd x-travel: 7.000 mm y-travel: 2.100 mm z-travel: 1.500 mm z-travel vertical: 1.200 mm Universal milling head (orthogonal design) Swivel range of milling head holder: 340 °Grad Swivel range of milling head: 180 °Grad Mounting cone for tools with steep taper: SK50 spindle truning speed range: 22 - 2.240 U/min Feed rate x,y and z-axis: 2 - 12.000 mm/min Rapid traverse rate x,y, and z-axis: 12.000 mm/min Drive power 100% ED / 60 % ED: 31,5 / 39 kW Clamping plate dimensions of clamping plate: 6.000 x 1.500 x 300 mm Number of T-slots: 6 T-slot distance: 250 mm max. load: 10 t/m² Equipped with: NC dividing head PEISELER AWU 650 with vertical faceplate, diameter 650 mm automatic universal milling head, orthogonal, (Completely refurbished 2017, rarely used since then) SIEMENS electronic handwheel 3 support tables various prism support blocks MAYFRAN hinged belt conveyor Coolant system with paper belt filter Work platform moving in the X direction, protective cover with viewing window The machine is in exceptionally good condition and can be viewed while under power. In 2017, a new SIEMENS 840D Solution line control system was installed, all drive motors and the control cabinet were replaced at the same time.

Condition: used, Year of construction: 2011, control HEIDENHAIN - iTNC 530 number of spindle speeds 18.000 - - - - - - - - - 5-axis simultaneous machining center | DMG - DMU 60 eVo equipped with ITC, a tool changer, a Blum tool measuring system, a Heidenhain workpiece measuring system and chip conveyor. The machine has 17.200 H spindle hours. The machine is in a well-maintained condition and can be inspected at any time under power. The machine videos from the production plant will be shared on request. Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DMU60Evo | DMU60 Evo | 60Evo | 60 Evo Tsdpfoxqrf Rex Abzed

Condition: used, Year of construction: 2019, x-travel 800 mm y-travel 950 mm z-travel 1020 mm Control TNC640 B - axis 360 x 0,001 ° A - axis -185 / +45 x 0,001 ° feed x-axis 1 - 65.000 mm/min feed y- axis 1 - 50.000 mm/min Feed z- axis 1 - 80.000 mm / min. rapid traverse X/Y/Z 60 / 50 / 80 m/min spindle turning speed - stepless 1 - 16.000 U/min power capacity at 100 % load 25,00 kW power capacity at 40 % load 32,00 KW max. torque at 40% / 100% load 206,00 / 159,00 Nm tool taper HSK-A63 tool magazin: 70 tool length - max. 500 mm tool diameter 118 mm tool diameter with 2 vacant positions 260 mm tool total weight 22,00 kg Chip to chip time 4,2 sec. size of pallet 630x630 mm interference diameter 900 mm total power requirement 35,00 kW weight of the machine ca. 25,00 t dimensions of the machine ca. 7,00 x 3,50 x H3,50 m 5-axis machining center with Heidenhain TNC640 control, integrated KNOLL coolant system KF220, coolant high-pressure 23bar, coolant through the spindle, chip conveyor, Tjdpfsxn Amaex Abzsd measuring probe Heidenhain TS640, electromechanical tool length check, BLUM-Laser, GROB Spindle-diagnosis (GSD), kinematics-set.

Condition: ready for operation (used), Year of construction: 2018, Control Unit Brand HEIDENHAIN Model iTNC530 Main Drive Spindle speed range 18000 Tool taper HSK-A63 Number of axis 5 Movement X-Axis Movement 670 Y-Axis Movement 600 Z-Axis Movement 820 Media Internal cooling Yes Additional Equipment Heidenhain rotary measuring system Heidenhain linear measuring system X,Y,Z This POS H800U Universal Machining Centre was manufactured in 2018 in Germany. It has 5 axis (X = 670, Y = 600 mm, Z = 820 mm / Swivel range -100 to +120 degrees, Rotary table 360 degrees endless) and comes with a HSK-A63 spindle with 18,000 rpm. The machine is operated by a iTNC530 HEIDENHAIN control and is equipped with a Heidenhain rotary and linear measuring system X,Y,Z. As extras it features air through spindle, internal coolant supply 20 bar with belt filter unit, a KESSLER table with diameter 800 mm, tool measurement with BLUM laser and operation mode 4. See tech specs overview as PDF (DE) attached. Application Types Milling Tedpfx Aexpkryebzjd

Condition: good (used), Year of construction: 2025, functionality: fully functional, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, controller model: TNC7, spindle speed (max.): 10,000 rpm, Equipment: chip conveyor, Used 5-axis machining center from DMG with TNC7 control Retrofit 2025 DMG Deckel Maho DMU 200 P Year of manufacture: 1999/2025 Condition: Good and fully functional Control: Heidenhain TNC7 X travel: 1800 mm Y travel: 2000 mm Z travel: 1100 mm Technical data: - Rotary table D1400 x 1700 mm - Table load capacity 6000 kg - B-axis - 60-position tool changer - SK 50 - 10,000 rpm - ICS (internal coolant supply) - 980-liter coolant tank - Chip conveyor - Rinse gun - Infrared probe Tjdpoxtwkwefx Abzod Transport and commissioning can be offered separately. Interim sale reserved. No liability is assumed for the technical specifications provided here. Legal regulations apply.

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Machine No. 51265 Year of manufacture: approx. 1967 Travel: X: 300 mm Y: 150 mm Z: 340 mm Table size: 600 x 200 mm Spindle taper: SK 40 - S20 x 2 Spindle speed: 40-2000 rpm, 16 steps Motor power: 1.0 and 1.6 kW, pole-changing Power supply: 380 Volt, 50 Hz - Feeds on X and Z axes - Spindle speed adjustable by 2 motor speeds and 8 gear steps - Quill travel on vertical milling head: 60 mm - Swivel, rotatable, and tiltable angle table - Coolant pump integrated in machine base Tedpfoghtvaex Abzed - Free-standing control cabinet Space requirements (L x W x H): 1100 x 1100 x 1600 mm Weight: 650 kg In good condition

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 540 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 20 m/min, total height: 2,720 mm, total length: 3,160 mm, total width: 2,240 mm, For sale: 3-axis CNC milling machine, Mikron VCE 600 Pro The machine is in excellent condition and ready for immediate use. Technical data: Year of manufacture: 2012 Control: Heidenhain ITNC 530 Operating hours: 22,840 Spindle hours: 10,902 X-axis travel: 600 mm Y-axis travel: 500 mm Z-axis travel: 540 mm Max. spindle speed: 10,000 rpm Tool holder: SK40 Tool magazine: Clamping surface: 700 x 500 mm Dimensions: 3,160 x 2,240 x 2,720 mm Weight: 4,800 kg Included in the offer: Chip conveyor, interior extraction, through-spindle coolant system, handwheel control, coolant gun, 3D probe, Renishaw tool measurement system Not included: Clamping devices, tool holders Transport and loading can be organised across Europe at additional cost upon request. Prices are quoted net plus VAT. Inspection possible by appointment. Please contact us – our team will be happy to assist you. Tjdpfoxnprvox Abzsd Trade-in or exchange possible! Machinery Purchase / Sale BUY / SELL PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact details, please visit our website.

Condition: used, Year of construction: 2009, x-travel 3.500 mm y-travel 1.200 mm z-travel 1.250 mm Control HEIDENHAIN TNC-530 table-size 1.250 x 1.250 mm table weight 4.000 Kg feeds 12.000 mm/min Number of revolutions 4.000 rpm power capacity 24 kW taper ISO 50 DIN 69871 AD spindle head Automatisch 2,5 x 2,5 Grad handwheel Heidenhain HR-410 internal coolant system feed 20 bar total power requirement 46 kW weight of the machine ca. 18.000 kg dimensions of the machine ca. 7.800 x 4.850 x 3.530 mm -Integralverkleidung -Doppelter Längsspäneabsauger -Querspanabsaugung -500-l-Tank mit Magnetabscheider-Papierfilter Tjdpfsvzhbtjx Abzsd

Condition: used, Year of construction: 2012, x-travel 500 mm y-travel 450 mm z-travel 400 mm control SIN840D SL B - axis -5 / +110 x 0,001 ° C-axis 360 x 0,001 ° feed X/Y/Z/-axis 1 - 24.000 mm/min rapid traverse X/Y/Z 24,00 m/min spindle turning speed - stepless 20 - 10.000 U/min power capacity at 40 % load 13,00 KW power capacity at 100 % load 9,00 kW tool taper SK40 toolpiece magazine: chain magazine 30 Stück diameter of tools max. 80 mm tool diameter with 2 vacant positions 130 mm tool length - max. 300 mm weight of tools max. 6,00 kg table surface area 630 x 500 mm workpiece weight 200 kg total power requirement 17,00 kW weight of the machine ca. 6,00 t dimensions of the machine ca. 4,50 x 4,00 x H2,90 m Todpfxew Tm R Uo Abzod 5-axis machining center with SIEMENS Sinumerik 840D SL control, swivel rotary table, tool magazine 30-positions, HEIDENHAIN touch probe, linear scales X/Y/Z, chip conveyor, electronical handwheel, 2nd work-area-door. Machine can be inspected under power.

Condition: ready for operation (used), Year of construction: 2001, Control Unit Brand HEIDENHAIN Model TNC 430 Main Drive Spindle speed range 15000 Number of axis 5 Movement X-Axis Feed Force 30000 m/min Y-Axis Feed Force 30000 m/min Z-Axis Feed Force 30000 m/min Media Chip conveyor Yes Additional Equipment Oil mist extraction Electronic handwheel Chip flushing gun Machine bed flushing NC swivel table Blow-off device Closed roof 200-liter coolant tank Includes 24 pallets and MTS-Chuck S-P/A clamping device. This 5-axis HERMLE C 600-U + EROWA Robot easy automation was manufactured in 2001. It features a 24-position magazine, extended X-axis of 2010 mm, C-axis rotary table, spindle speed up to 15,000 rpm, and a 30 tool capacity. Includes a chip conveyor and a 200-liter coolant tank. If you are looking to get high-quality automation capabilities consider the HERMLE C 600-U machine we have for sale. Contact us for more information about this machine. Tedpfxow U E Nfs Abzsd Application Types Milling

Year of construction: 2011, condition: ready for operation (used), X-axis: 1150mm, y-axis: 710mm, z-axis: 710mm, number of tool positions: 32, rapid traverse/feed rate: 30m/min, working area height: 2578mm, tool holder: SK40, accuracy: 10μm, speed: 18,000/min, drive power 40% ED: 28kW, control: Heidenhain iTNC 530, power connection: 80A, connected load: 48kVA, length: 4228mm (including rear wall and chip conveyor), width: 3458mm, total height: 3256mm, chip conveyor height: 965mm, weight: 10.5t, operating hours: 30,521h, spindle hours: 15,386h. With Zeroclamp 12 pots 138 (zero-point clamping system). An on-site inspection is possible. Tjdpfxextpqve Abzjd

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 3,796 h, functionality: fully functional, machine/vehicle number: S2909835010226, travel distance X-axis: 600 mm, travel distance Y-axis: 855 mm, travel distance Z-axis: 750 mm, rotational speed (max.): 21,000 rpm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Highlights: - Powerful HSK-A 63 Motorizied spindle with 21.000 rpm - pallet change system for 2 pallets - High-pressure cutting fluid system (40 bar) _____ Basic machine G350 AB generation 2 Travel path of the X-axis 600.0 mm Travel path of the Y'-axis 855.0 mm Travel path of the Z-axis 750.0 mm Power supply 400 V, 50 Hz, TN-S Work area door, automatic, for manual and automatic loading/unloading Decentralized work area mist collector: 800 m³ Machine control SIEMENS SINUMERIK ONE Swivel axis calibration GSC Advanced Energy efficiency package EEP1 Tilting table unit (A'-axis) Rotary table with pallet clamping system GROB (B'-axis, PW) Motorized spindle HSK-A 63, 21,000 rpm, 35/47 Nm, 29/39 kW, oil-air lubrication GROB spindle diagnostics GSD Double disk-type tool magazine HSK-A 63 with 105 (45+60) tool pockets Tool cleaning device Tool coding, system BIS-M (BALLUFF) Electromechanical tool breakage detection device Laser measurement system LaserControl NT LC50-DIGILOG for milling tools Pallet change system for 2 400 x 400 mm pallets Setup station door, automatic, for manual and automatic loading and unloading 2x Pallet 400 x 400 mm, T-slots, with pallet changer hook Pallet equipped with 6 fluid connections High-pressure cutting fluid system (5-40 bar, IKZ) Continuous cooler for cutting fluid with an air cooled cooling unit (13 kW) Compressed air feed through spindle center Cutting fluid recirculation on weekends Oil skimmer for cutting fluid care Air gun at the work area Flush gun at the work area Flushing unit (Z-axis) Part clamping system in the work area Todpfjxtknpjx Abzed KP1: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP2: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP3: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP4: Pressure oil, proportional valve technology, 30-190 bar (H2.1)  Cooling unit for hydraulic proportional valves Part clamping system in the setup station of the pallet changer KP1: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP2: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP3: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP4: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP5: Compressed air, manual pressure regulation, 0.5-5 bar (P1.1) KP6: Compressed air, seating check system with SOPA air gap sensor make FESTO (P6.1) Work area camera for machine control panel GROB⁴Pilot (ROTOCLEAR) Radio touch probe RMP400 (RENISHAW) 12-month warranty

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 150 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, nominal power (apparent): 35 kVA, torque: 120 Nm, controller manufacturer: Heidenhain, controller model: TNC7, table load: 2,000 kg, rotary table diameter: 800 mm, overall weight: 18,600 kg, spindle speed (min.): 20,000 rpm, spindle motor power: 34,000 W, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, As-new demonstration machine, laser, probe, configurable through coolant (IKZ) Tjdpfjxbzyrsx Abzsd

Condition: ready for operation (used), Year of construction: 2006, operating hours: 12,965 h, Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Spindle speed range 6000 (-15000) Tool taper SK 40 (HSK-A63) Number of axis 5 Movement X-Axis Movement 2940 mm X-Axis Rapid Traverse 40 m/min Y-Axis Movement 700 mm Y-Axis Rapid Traverse 30 m/min Tjdsxnr Itspfx Abzod Z-Axis Movement 850 mm Z-Axis Rapid Traverse 30 m/min C-Axis Movement +/-100º Table Table load 1200 kg Tools Slots in storage 36 Max tool diameter 85 (with adjacent free slots 135 mm) Max tool length 400 mm Additional Equipment Machines comes with C-axis and a +/-100º b-axis head. This 5-axis AXA VHC 3-3000 S was manufactured in 2006. A universal machining centre, it offers robust capabilities for diverse machining tasks. Ideal for those seeking reliable performance in a used machine. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2023, Control Unit Brand HAAS Main Drive Spindle speed range 15000 RPM Spindle motor power 22.4 kW Tool taper ISO40 taper Media Chip conveyor Yes Todpjxdpa Eefx Abzjd Additional Equipment Chip Conveyor: Positioned above coolant tank with auto-reverse function This 5-axis HAAS UMC-500SS universal machining centre was manufactured in 2023. It offers advanced capabilities for complex and precise machining tasks. Consider the opportunity to buy this HAAS UMC-500SS universal machining centre. Contact us for more information. Application Types Milling