Used Used Transformator for sale (46,621)

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: K725490, type of input current: three-phase, overall weight: 7,430 kg, input voltage: 10,000 V, input frequency: 50 Hz, nominal power (apparent): 3,000 kVA, secondary voltage: 500 V, protection type (IP code): IP00, input current: 173 A, type of output current: three-phase, output voltage: 500 V, Equipment: type plate available, 3-phase transformer (dry) from primary 10KV (± 5%) to 500 V secondary with a capacity of 3000 KVA Dedpfxsx Sv R No Aptjkt

Condition: like new (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: K807637, type of input current: three-phase, overall weight: 8,700 kg, input voltage: 10,000 V, input frequency: 50 Hz, nominal power (apparent): 4,000 kVA, secondary voltage: 690 V, protection type (IP code): IP00, input current: 231 A, type of output current: three-phase, output voltage: 690 V, Equipment: type plate available, three-phase transformer (dry) from primary 10 kV (± 5%) to secondary 690 V with a capacity of 4000 kVA Djdpfx Apsx Swpgjtjkt

Condition: good (used), Year of construction: 2001, functionality: fully functional, Grinding wheel 508x254 (305) mm, regulating wheel 330x254 (305) mm, regulating wheel speed 0-115 rpm, grinding wheel rotation speed 45 m/sec, grinding diameter 2-150 mm, grinding wheel drive 45 kW, machine weight 6.5 tons, space requirement approx. 3.0x1.5 m The machine will be equipped with a new Siemens S7 control system with new control panel, dressing quill SS electrically controlled via servo motor. Machine will be completely checked, defective parts repaired or replaced. Various options possible (KM system, infeed/outfeed, workpiece rulers etc.) Dkodpfsuy Ifgjx Aptot

Year of construction: 2005, condition: excellent (used), Name: Lödige heating/cooling Mixers Manufacturer: Lödige Type: TSHK160 / KGU400 Year built: 2005 Total content: COOLING MIXER: vessel capacity: 391, Jacket capacity: 45 liters. RAPID HEATING MIXER: vessel capacity: 210 liters. Jacket capacity: 30 liters Speed: 104 / 300-1500 rpm Driving force: BEVEL GEAR MOTOR: 11 kW, n1 = 1300 rpm, n2 = 104 rpm and ENGINE IM V1 Frequency controlled: 45kW 300/1500 rpm Operating voltage: 400 V, 50 Hz Material: Stainless steel Dkodpfx Apjiup H Tstjt Hours of operation: Very few operating hours Design: ATEX version / Explosion proof Gear box: Bevel gear motor/ motor frequency controlled Parts in contact with product: Stainless steel 1.4541 Dimensions: L 4605 x W 4225 x H 3550 mm Technical doc.: Yes Message: It was used in a technical plant for wood chip and melamine resin additives. Accessories: Platform with stairs, 30 kW temperature control unit, control panel, control cabinet, dust filter DN 200/ 100 und DN 150/ 100

Condition: like new (used), 92 linear meters of galvanized pallet racking for outdoor use, Nedcon Like new, see pictures! A top-quality racking system from the major manufacturer NEDCON – a subsidiary of Voestalpine AG with headquarters in the Netherlands. Frame: Height 7.2 m, Depth 110 cm, Strong profiles, reinforced bracing, wind and snow load calculated. Frame and base plates are Sendzimir galvanized. Beam length 2.7 m, hot-dip galvanized, Beam profile 130/50mm, Beams with load capacity/bay: 4000 kg Negotiable price: on request! The offer includes: + 36 units of pre-assembled frames, depth 110 cm, height 7.2 m + 210 units of beams, length 2.7 m, 4000 kg load capacity/bay + 420 units of safety locking mechanisms + 72 units of concrete anchors Additional cost for hot-dip galvanized feet incl. upright protection: €50 net per frame Roof structure available on request! Load capacity signs, documents, etc. are, of course, included. Further accessories can be found in the accessories catalog. Goods are in stock. Transport and assembly are available on request. Other configurations available on request. Over 2000 meters available. Inspection possible at any time by appointment. Further information on request. We constantly have over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, details, and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse) Lenox Trading – Top warehouse technology & used & new heavy-duty racking Dsdpfxofndh Te Aptjkt Description: Are you looking for high-quality warehouse racking for sale? With around 100 employees, Lenox Trading is one of the largest dealers for new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of storage platforms & steel platform structures immediately available • Weekly 30–50 semi-trailer loads of goods turnover for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether you want to buy pallet racking, heavy-duty racking, high-bay racking, shelving, tire racking or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearing orders, we offer a complete all-round package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete inventory, including thorough cleaning. 2. Commission-based auction: Carrying out auctions on behalf of clients. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods dispatch, logistics, dismantling and thorough handover. Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-b

Condition: used, Please contact Team DPX for more information Dkodexpcwhspfx Aptst Beschikbare containers: Available containers: DPX-29037 - 20FT USED 2011 silent container - €12.500,- (photo 1) DPX-29040 - 20FT NEW 2015 silent container - €15.00,- (photo 2) DPX-29046 - 20FT NEW 2015 silent container - €15.000,- (photo 3) DPX-29048 - 40FT HC NEW 2017 silent container - €18.500,- (photo 4) DPX-29049 - 40FT HC NEW 2017 silent container - €18.500,- (photo 5) DPX-29050 - 40FT HC NEW 2023 silent container - €25.000,- (photo 6)

Condition: used, Bito P2 Beams - Crossbars, used 🧰 Product Features • Manufacturer: Bito Dksdpsyn Hx Iefx Aptjt • Color: blue • Condition: used • Box profile: 11 x 5 cm / 12 x 5 cm / 9.5 x 5 cm • Beams: 270 cm and 135 cm • Load capacity 270 cm: 2400 kg per level • Load capacity 135 cm: 1600 kg per level 💰 Price per beam 270 cm: € 19,- net, excluding VAT. Price per beam 135 cm: € 17,- net, excluding VAT. • Quantity discount: available upon request • Shipping costs: available upon request throughout Europe • Delivery time: Available immediately • Inspection and collection: possible by appointment at any time We have over 5,000 linear meters of pallet racking systems from numerous manufacturers constantly in stock. (Subject to changes and errors in technical data, information and prices as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top warehouse technology & used & new heavy-duty shelving Description: Are you looking for high-quality warehouse shelving to buy? With around 100 employees, Lenox Trading is one of the largest dealers for new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of shelving available for immediate delivery • 20,000 m² of storage platforms & steel construction platforms immediately available • 30–50 semi-trailer loads of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether pallet racking, heavy-duty shelving, high-bay racking, shelf racking, tire racking or shelving for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Jungheinrich heavy-duty shelving) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearing orders, we offer a complete, all-round carefree package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete inventory including complete clearing. 2. Commission auction: Carrying out auctions on behalf of clients. Our full-service by our own employees: Cataloging, office preparation, inspection, goods delivery, logistics, dismantling and complete handover. Whether you became aware of us through heavy-duty shelving or are looking for galvanized heavy-duty shelving / heavy-duty shelving systems – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: used, Used Morton-Lodige stainless steel ploughshare mixer. Unit believed to be FKM1200D, approximately 1200 litres capacity. Unit measures approximately 1750mm long x 1000mm diameter. Unit has stainless steel ploughshare blades and (2) stainless steel half ploughshare blades driven by motor/gearbox. Unit has a pneumatically operated bottom entry discharge valve. Has provision for (2) choppers but none currently fitted. Unit is mounted on a mild steel frame. Dkodpfx Apey Inr Detjt Specifications: Bowl Volume: 1,200 L Material Of Construction: Stainless Steel Choppers (Y/N): N Vacuum Internal (Y/N): N Jacket (Y/N): N

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, type of input current: three-phase, overall weight: 400 kg, input voltage: 400 V, input frequency: 50 Hz, nominal power (apparent): 63 kVA, input current: 2 A, type of output current: AC, output voltage: 110 V, Equipment: documentation/manual, 63kVA transformer for sale 3x400V -> 1x110V Manufacturer: Trafó-Print Kft. Type: TZ 63 000 Power: 63kVA Dkodpfx Aow Ev Iheptjt Primary: 3x400V Secondary: 1x110V

Condition: used, Year of construction: 2016, functionality: fully functional, 400 kVA transformer station, year of manufacture 2016, make Scheidt; 400 kVA oil/hermetic transformer, make CG Power, year of manufacture 2013, type DECkC0, 20 kV ± 2x2.5% / 400V with HV plug-in bushing; including switchgear. Dedpsx Dahtsfx Aptjkt

Condition: used, functionality: unexamined, Ferwood Code: RU0009344 - Manufacturer Code: 4-008-26-0292 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Dkjdpfjv Hrk Aex Aptet

Condition: used, Year of construction: 2015, empty load weight: 630 kg, Year: 2015 Electric. Dkodpsw S Nuysfx Aptjt Dimensions: 1.30 x 0.78 meters. Lifting capacity: 200 kilos. Weight: 630 kilos. With CE certificate and safety inspection. Price: €4.250,- Ex VAT

Condition: used, 🧰 Product features • Condition: used, see photos • Color: galvanized • External dimensions: 1181 x 1093 x 40 mm • Internal width: 1116 mm • Load capacity: 500 kg / m² • Weight: 14.7 kg • Mesh size: 43 x 65 mm 💰 Price € 32,- net, excl. VAT • Quantity discount: on request • Shipping costs: available throughout Europe, on request • Delivery time: immediately available • Inspection and collection: possible at any time by arrangement Constantly over 5000 linear meters of pallet racking in stock from numerous manufacturers (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top warehouse technology & heavy-duty racking, used & new Description: Are you looking for high-quality storage racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers for new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ PROMPTLY AVAILABLE: • Over 10,000 linear meters of racking promptly available • 20,000 m² of storage platforms & steel structures immediately available • Weekly 30–50 semi-trailer truckloads of goods turnover for maximum selection 📦 OUR RANGE (BUY ONLINE AT A GOOD PRICE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving, tire racking or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) Dedjx Exnqspfx Aptokt • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-round package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete stock including thorough clearance. 2. Commission-based auction: Conducting auctions on behalf of clients. Our full service provided by our own employees: cataloging, office preparation, inspection, goods dispatch, logistics, dismantling and thorough handover. Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: used, Year of construction: 2000, machine/vehicle number: SO126, Used HDPE Extrusion Blow Molding Machine for 10 L – 300 bph – Overview Dkodpfx Aeyhbt Hoptot Second-hand Uniloy Milacron HSM10/D extrusion blow molding machine designed for producing up to 10 L HDPE containers. With a single-parison head and robust clamp, this EBM unit is ideal for industrial packaging and beverage production auxiliaries (e.g., water canisters, edible oils) and can be integrated within a used bottling line. Documentation and manuals are available. Reference number: SO126. Technical Specifications & Performance Data Main data Make/Model: Uniloy Milacron HSM10/D Year: 2000 Technology: Extrusion Blow Molding (EBM), single parison Material: HDPE Number of cavities: 1 Max container volume: 10 L Indicative output: up to about 300 bph on 10 L (application-dependent) Manuals: included Ref. no.: SO126 Extruder Screw diameter: 100 mm; L/D 24 HDPE screw speed: 0–70 rpm Plasticizing capacity (HDPE): approx. 300 kg/h Main extruder motor: 89 kW Heating zones: 6; barrel heating power: 31.4 kW Motor cooling power: 0.58 kW; barrel cooling power: 1 kW Parison head Type: PE 1/200, single parison Max die diameter: 200 mm Head heating power: 14.2 kW Parison thickness control: hydraulic (wall-thickness programming) Clamp & blow unit Clamp force: 200 kN Max mould size: 650 × 500 mm (H) Mould thickness: 2 × 150 mm Mould opening stroke: 300 mm Horizontal carriage stroke: 660 mm Blow pin stroke: 240 ± 5 mm Blow pin thrust at 50 bar: 320 kg Electrical Installed power: 156 kW (average consumption ~104 kW) Supply: 400 V, 50 Hz, 318 A, 3 + N Hydraulic system Reservoir capacity: 400 l Pump flow (1470 rpm): 123 l/min Max pressure (main circuit): 190 bar Main hydraulic motor: 37 kW; oil cooling motor: 1.5 kW Pneumatics Operating pressure (general): 6–8 bar; air use: 2000–2500 Nl/min Post-cooling pressure: 6–8 bar; air use: 1000–1500 Nl/min Cooling water Mould circuit: 8–12 °C; flow 15 m³/h Extruder & hydraulic oil: 10–24 °C; flow 4 m³/h Dimensions & weights Approx. machine size (L × W × H): 7600 × 7700 × 3900 mm Blow unit weight: 7600 kg; Extrusion group weight: 6400 kg Noise level at operator: < 85 dB(A) Advanced Automation & Control Systems Hydraulic wall-thickness programming for precise parison control, improving weight distribution and top-load performance on 10 L containers. Dedicated Uniloy command and control software (version code available in manuals) with operator interface for setpoint management and diagnostics. Integrated temperature control across six extruder zones and heated head for stable processing at up to 300 °C transformation temperature. Interlocked guarding and emergency stops for safe operation. Production Line Integration Capabilities This second-hand extrusion blow molder is integration-ready for downstream equipment typical of a used bottling line and industrial packaging systems: Conveyor...

Condition: used, empty load weight: 469 kg, Year of construction: 2020, Year of construction: 2020. Engine: Hatz. 1D81Z Diesel Plate width: 70 cm. Impact force: 65kn. Electric start Dedpfxeyh Rzwj Aptjkt Forward/Reverse. Price: € 2.950,- ex. VAT

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, nominal power (apparent): 63 kVA, secondary voltage: 200 V, type of output current: three-phase, output voltage: 200 V, Equipment: documentation/manual, type plate available, Dry type transformer 3 phase transformer 63 kVa p 3x400V/sz 3x200 V 63kVa 3 phase transformer for sale in excellent condition Manufacturer: Trafó Print type: BTZ63000 power: 63kVa U PRIMARY: 3X400V (3x125A) Dkjdpfx Apjydrgpjtjt U SECONDARY: 3X200V frequency: 50Hz GE Record D250 compact circuit breaker steel housing

Condition: used, TOS BHU 50×2000 – USED UNIVERSAL CYLINDRICAL GRINDER A used TOS BHU 50 universal cylindrical grinder, center distance 2,000 mm, from a company liquidation. Inspection on-site or via video call is possible at any time. The following technical data are taken from the machine-specific TOS-BHU-50 data sheet and serve as a technical reference. Binding values for this individual machine will be determined after inspection. KEY FEATURES - Automatic program for longitudinal, transverse, and plunge grinding, external and internal - Precision standard IT class 5 - Spindles on hydrodynamic bearings with automatic bearing adjustment - Infinitely variable workpiece spindle speed, swivel headstock on both sides - Swiveling grinding wheel head TECHNICAL DATA (BHU 50 SERIES) - Grinding diameter: 500 mm Dkedpfx Aezi Strsptst - Center distance: 2,000 mm - Center height: 250 mm - Grinding wheel (Ø x width x bore): 500 x 80 x 203 mm - Diameter of worn grinding wheel: 380 mm - Diameter of workpiece in open/closed steady rest: 110 mm - Diameter of chuck: 200 mm - Taper in workpiece spindle and tailstock spindle: MK 5 - Swivel range of workpiece spindle headstock: 90°, grinding wheel headstock: ±45° - Largest longitudinal travel of the table (at 2,000 mm center distance): 2,290 mm - Table speed, infinitely variable: 0.05-5 m/min - Grinding spindle speed: 1,230 / 1,470 rpm - Workpiece spindle speeds: 16 steps, range 12-400 rpm - Grinding wheel headstock motor: 7.5 kW - Total power consumption: 16 kVA - Machine weight (at 2,000 mm center distance): approx. 6,600 kg - Largest workpiece weight: 300 kg between centers, 300 kg cantilevered STANDARD EQUIPMENT (SERIES) - Grinding wheel 500 x 80 x 203 mm for 33 m/s circumferential speed, flange, and guard - Dressing and mounting device for the grinding wheel flange, balancing mandrel - 2 fixed centers MK 5, 2 open steady rests (Ø 10-110 mm) - Sedimentation coolant system, splash guard - Micrometric dressing device for the grinding wheel (tailstock) - Driver and operating key set, machine lamp, technical documentation We would be happy to clarify in advance whether the specific machine has the full range of features based on its actual equipment. CONDITION Used machine from a company liquidation. Sold "as is, where is," warranty excluded. On-site inspection or video call inspection is highly recommended; independent functional and accuracy testing is available upon request. A general overhaul is possible upon request and for an additional charge. OUR SERVICE Online or on-site factory inspection, transport can be organized upon request, installation, commissioning, and operator training by our service technicians, direct German-speaking contact person for spare parts and support, member of FDM, the German Association of Machine and Tool Wholesale. As this is an individual machine, availability is subject to prior sale. Please call or write to us briefly, and we will arrange an inspection appointment as soon as possible.

Condition: good (used), Transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer Dksdpfx Aszi S Nmoptst -Manufacturer: ismet, transformer -Type: ISTK -Item No.: 469133 -Power: 1500 VA -Voltage: 380V / 110/220V -Technical data: see photo of the nameplate -Dimensions: 220/155/H150 mm -Weight: 13.1 kg

Condition: used, rand: DANOBAT Dedszqrmzjpfx Aptskt Model: RT 1200 Useful support surface 1200 x 450 mm Useful grinding surface (100 mm wheel) 1200 x 600 Useful grinding surface (50 mm wheel) 1200 x 550 Longitudinal travel X axis 1300 mm. Transverse travel Y axis 500 mm

Condition: used, Year of construction: 2002, functionality: fully functional, pressing force: 100 t, stroke length: 200 mm, table width: 100 mm, table length: 3,100 mm, table height: 1,000 mm, throat depth: 380 mm, distance table to ram: 335 mm, clearance between the columns: 2,650 mm, total length: 3,300 mm, total width: 1,850 mm, total height: 2,550 mm, overall weight: 7,600 kg, Equipment: CE marking, documentation/manual, This BEYELER PR 3 press brake represents a reliable solution for sheet metal bending operations. Equipped with a CYBELEC DNC 1200E CNC control system, it has a bending force of 100 tons, a useful length of 3,100 mm, and 3-axis control (X - Y1 - Y2). The machine is complete with DSP Laser safety light barriers and is supplied with a set of tools. Key features: * Year of manufacture: 2002 * CNC: CYBELEC DNC 1200E * Working force: 1000 kN (100 tons) * Bending length: 3100 mm * 3-axis control (X - Y1 - Y2) * Maximum stroke: 200 mm * Distance between uprights: 2650 mm * DSP Laser safety light barriers Equipment: - Machine complete with 1 set of tools - Operating manual - CNC manual - Electrical diagrams - DSP Laser light barrier manual - CE declarations of conformity Otto Machine Dkjdpfxezrtt Ee Aptot For over 30 years, Otto Machine has been selecting and marketing used machine tools in Italy and abroad. The machines can be viewed at our showroom or via video call. Contact us to receive the complete technical data sheet, photographs, videos, and all information about the machine. It is possible to arrange a visit to our showroom or a video call to view it remotely.

Condition: used, HESS HYDRO frame press – used Manually hydraulically operated, Hydraulic cylinders arranged horizontally, Hydraulic cylinders arranged vertically ----- Technical data ----- Press width: 4,000 mm, Press height: 2,550 mm, Cylinder stroke: 150 mm, Motor: 1.1 kW Dkodpfxszkkdlo Aptot

Condition: used, Keyway milling and broaching machine PANHANS 1376 - used ----- Technical data ----- Length of baseplate: 1,000 mm, Djdpfx Apozk Ai Tstjkt Travel of slide: 710 mm, Size of slide plate: 295 x 225 mm, Overall height approx.: 56 mm

Condition: used, Year of construction: 2004, machine/vehicle number: AT31, Used APV N35 Plate pasteurizer 10000LhTechnical Specifications & Performance DataThe APV Products N35 is a plate pasteurizer engineered for high-efficiency thermal treatment of liquid food and beverage products. Built in 2004, this second hand system offers a compact, hygienic solution for beverage production and industrial packaging processes where consistent heat transfer and reliable performance are essential. Previously operated on whey in a dairy environment, it is now dismantled and ready for integration into a used bottling line or processing plant.Manufacturer: APV ProductsModel: N35Year: 2004Type: Plate pasteurizer (plate heat exchanger design)Nominal capacity: 10,000 l/hHeat transfer surface: 56.35 m²Working pressure: 10.0 barPrevious application: Whey (dairy processing)Advanced Automation & Control SystemsThe N35 plate pasteurizer architecture supports modern automation strategies. Typical configurations include temperature control loops, flow regulation, and safety interlocks to maintain stable pasteurization temperatures and hold times. The system layout facilitates integration with common PLC/HMI platforms used in beverage production, enabling recipe control, trend logging, and alarm management. Operator-friendly interfaces allow fast start-up, monitoring, and shutdown routines, while sanitary design supports rigorous hygiene requirements.Production Line Integration CapabilitiesThis flash-style thermal unit fits upstream of filling and packaging operations across a wide range of process layouts. It can be paired with balance tanks, deaeration, homogenization, and inline filtration, and can feed fillers serving PET or glass bottling operations in a used bottling line. Its compact footprint makes it suitable for both standalone processing cells and fully integrated beverage production lines. Format changes are process-driven (flow/temperature parameters) rather than container-driven, enabling multi-product flexibility for water-based and dairy-derived liquids.Machine Condition & Maintenance HistoryThe unit was previously operating on whey in a dairy plant. It has been professionally dismantled and is ready for collection and installation at a new site. Its condition supports recommissioning after standard installation, utility connection, and validation procedures typical for second hand processing equipment.Operational Performance & VersatilityThe APV Products N35 plate pasteurizer provides efficient heat recovery and stable thermal profiles for continuous processing. The plate heat exchanger design is well-suited for clear and low-to-medium viscosity liquids found in beverage and dairy processing. It aligns with industrial packaging requirements where consistent microbiological stability, product quality, and throughput are priorities. The 10,000 l/h nominal capacity makes it a solid choice for mid-scale beverage production environments seeking reliable performance.Installation Requirements & Site PreparationSite readiness typically includes utilities for heating and cooling media, process water, and drain connection... Djdpfx Apjzndtbstokt

Condition: used, Year of construction: 2022, machine/vehicle number: LC653, Used Micro can CL10 filling line 4000 Cans per hourTechnical Specifications & Performance DataThis complete automatic canning line is a compact, engineered for efficient beverage production in aluminum cans. Manufactured by Micro Can, it integrates key bottling equipment into a cohesive, space-efficient unit suitable for industrial packaging environments. As a second hand, used bottling line, it offers proven reliability and excellent value for expanding or optimizing production.Line type: Complete automatic canning lineManufacturer: Micro CanMain module: Micro Can CL10 filler/seamerRated output: 4,000 cans per hourContainers: Aluminum cansFormats: Standard 0.33ml and 0.44mlFilling type: gravityAdvanced Automation & Control SystemsThe line is designed for streamlined operation with integrated control and coordinated infeed/outfeed logic between the depalletizer, filler/seamer, and labeling machine. Quick setup and simple recipe changes support efficient format adjustments. Operator-friendly controls, interlocked guards, and emergency stops provide safe, intuitive handling during routine operation and maintenance. The configuration minimizes interface risks and ensures stable synchronization across the complete packaging process.Production Line Integration CapabilitiesOptimized for inline operation, this second hand canning line connects upstream depalletizing to downstream labeling with harmonized conveyor handling. It is suitable for beverage production expansions, pilot facilities, or as a dedicated canning cell within a larger packaging plant. Designed for aluminum cans, it can be interfaced with upstream processing and downstream secondary packaging equipment as needed.Machine TypeManufacturer/ModelYearDepalletizerFilling MonoblockMicro Can CL10Labeling MachineWrap-around labellerMachine Condition & Maintenance HistoryThe line is offered as a complete, ready-to-operate unit. As a used bottling line, it has been configured for immediate deployment in industrial packaging environments, subject to standard site preparation and utilities. Overall condition is consistent with a professionally integrated second hand canning line built for dependable daily operation.Operational Performance & VersatilityWith a rated output of 4,000 cans per hour, the Micro Can CL10 filler/seamer delivers stable filling and precise seaming performance. The wrap-around labeling machine supports continuous production with consistent label application, and the depal... Dsdpfx Ajzkhtqoptokt

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 13201, type of input current: three-phase, overall weight: 5,150 kg, input voltage: 3,000 V, input frequency: 50 Hz, nominal power (apparent): 2,500 kVA, secondary voltage: 400 V, protection type (IP code): IP00, input current: 481 A, type of output current: three-phase, output voltage: 400 V, Equipment: type plate available, 3-phase transformer (dry) from primary 3000V to 400 V sekundär with a capacity of 2500 KVA Dedpfx Apox Sd D Djtskt