Used Vacuum Dust Extraction for sale (10,588)

Condition: good (used), Dust extraction,welding fume extraction,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,shotblasting and all kinds of dry dust. Brand: Vaupel - Gram Model : FL 104H High-pressure device. Filter cleaned by compressed air pulses during operation, thus high efficiency of the device. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters : Sound-insulated fan with silencer with 18.5 Kw output Capacity 8000 m3/h Filtration area 104 m2 Included : Filter unit Inverter Nedjn Nw Ntjpfx Akmsdc Lime dispenser Noise suppressor

Condition: good (used), Storage location: 3129 Manufacturer: Pulsnitz Year of manufacture: 1979 Machine number: 1308 Type / Model: Sto 5 / 125-1 Capacity: 400 m³/h Maximum negative pressure: 1,250 Pa Density: 1.2 kg/m³ Maximum operating temperature: 50 °C Impeller diameter: 480 mm Suction port diameter: 380 mm Connection: 0.37 kW 220/380 V Ndsdezmaw Hepfx Akmec Condition: good Weight: 35 kg Dimensions: 480 x 600 x 1,100 mm

Condition: used, Year of construction: 2009, negative pressure: 16,000 Pa, filter area: 40 m², volume flow: 5,800 m³/h, RUWAC dust extractor, extractor, dust collector, vacuum filter, self-cleaning, dust collector for extraction of metal dust, mineral dust, hard fibers, combustible, hazardous, toxic substances and efficient collection of process dust, sandblasting, sodding, grinding, polishing and all kinds of dry dust. Thanks to the wide performance range, these devices are perfectly suited for almost all applications applications - both as a single-station solution and as a central solution. All dust collectors are equipped with large-size filters for dust class M. The unit in the version with dust explosion protection (ATEX zone 22) - EX II 3D , T= 70 °C The high-pressure fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. Pocket filter cartridge - multi-pocket (area of 40 m2) 20 Kw fan. The unit has a frequency converter (Danfoss VLT). Capacity 5800m3/h Vacuum 16,000 Pa Electromotive cleaning of the filter by means of vibrating motors. Complete with dispenser (for sticky dusts) for automatic addition of filter additives to protect filter cartridges. Inlet diameter - 300 mm Nsdpotqt Uxsfx Akmjdc

Condition: new, Year of construction: 2026, CORMAK SGDCW1000 Industrial Dust Extraction Unit with a Wet (Water) Filter The CORMAK SGDCW1000 industrial dust extraction unit with a wet (water) filter is an advanced device specially designed to work with deburring machines and grinding stations. It is perfectly suited for the safe extraction of dust with an increased risk of ignition and explosion – in particular aluminium dust, as well as during the processing of stainless and mild steel. By immersing contaminated air in water, it effectively neutralizes fire hazards during production processes. Main Advantages and Characteristics of the Device Fire safety: Wet separation of metal dust (aluminium, magnesium) significantly reduces the risk of explosions and ignition of sparks in the deburring machine's extraction system. High filtration efficiency: The extracted air passes through a water tank, where microscopic dust particles are permanently trapped in the tank. Heat recovery: After the cleaning process, the air reaches optimum humidity (approx. 60%) and can be safely returned to the production hall. Durable and robust construction: The device is made of high-quality corrosion-resistant materials and designed for continuous operation under demanding industrial conditions. Easy maintenance: Easy access to the filtration area and water tank facilitates daily cleaning and servicing. Technical Specifications Motor power — 7.5 kW Maximum capacity — 3000 m³/h (at 20°C and a medium density of 1.2 kg/m³) Nsdpfez Ahurjx Akmodc Fan rotational speed — 2900 rpm Maximum pressure — 4600 Pa Weight — 450 kg Filters — Mesh, 2 × 750 × 810 mm Suction inlets — 2 × Ø200 mm Fan outlet flange — Ø180 / Ø225 mm Overall dimensions (W × D × H) — 1400 × 850 × 2170 mm Construction and Standard Equipment The construction of the wet separator has been optimized for perfect cooperation with modern deburring machines and finishing machines. The standard equipment includes: An efficient industrial fan with a high rotational speed, designed to generate high negative pressure. Two advanced mesh filters with dimensions of 750 × 810 mm. A spacious water tank with a drain for water replacement. Ergonomic inspection panels providing continuous visibility of the filtration process. A safe electrical system adapted to stringent industrial standards.

Condition: excellent (used), Year of construction: 2021, Extraction connection, D 140mm Chip collector capacity 200L Airflow rate [m³/h] 2500 3 kW, 400V Ndjdpfezxql Eex Akmoc

Condition: good (used), Year of construction: 2006, radial fan, dust extraction blower, fan, extraction, dust blower, blower -Manufacturer: Airheat, radial fan with soundproof housing -Type: RDH-500-11.0 -Volume flow rate: 20000 m³/h -Motor: Hoyer 15 kW 1460 rpm -Dimensions: see technical drawing in the photos -Overall dimensions: 1800/1110/H2900 mm -Weight: 584 kg Nodpfxjzwdn Ds Akmodc

Condition: new, Year of construction: 2026, DCV4500 VIBER – Modern Industrial Dust Extraction System with Automatic Filter Cleaning The DCV4500 VIBER is a modern industrial dust extraction system designed for continuous, efficient, and quiet operation in demanding woodworking environments. The unit ensures stable extraction performance throughout the entire operating cycle, minimizing the risk of efficiency losses and production downtime. Main Advantages of the Machine VIBER system – automatic filter cleaning without interrupting operation. Full upper enclosure – significantly reduces noise and vibrations. Extraction capacity of 4500 m³/h – ensures effective dust removal even with several machines operating simultaneously. Highly sealed system design – prevents heat losses and guarantees clean air in the production hall. New safety protection system – improves operational reliability. Metal rotor – dynamically balanced for quiet and vibration-free operation. Design and Technology The machine is based on a reinforced, hardened steel construction. Its compact dimensions allow the extractor to be installed close to a wall or between machines without limiting the available working space. Metal waste containers equipped with viewing windows and a mobile system enable quick emptying and easy monitoring of filling levels. Service doors provide convenient maintenance access and simplify the replacement of filter bags. Ndedpouc Unqofx Akmoc Precision and Work Efficiency The dust extraction fan used in the DCV4500 VIBER provides an air suction speed of 28–32 m/s. Thanks to the specially designed rotor blade geometry, maximum efficiency is achieved with minimal energy consumption. At the same time, filtration down to 5 microns effectively captures fine dust particles, improving workplace air quality and enhancing the final quality of processed materials. Applications The DCV4500 VIBER is an advanced central dust extraction system ideal for: woodworking plants, furniture manufacturers, producers of wooden components. It efficiently supports machines such as sanding machines, panel saws, edge banders, and other equipment generating large amounts of dust and chips. Its reliable operation makes it suitable for both serial production and intensive industrial use. Standard Equipment Control cabinet with ON/OFF function 18 polyester filters with filtration efficiency down to 5 microns Metal waste containers with viewing windows Full sound-insulated enclosure Technical Specifications Parameter Value Motor power (S1) 3.0 kW Power supply 400 V / 50 Hz Motor speed 3000 rpm Extraction capacity 4500 m³/h Negative pressure 3000 Pa Noise level 80 dB Suction port diameter 200 mm Air velocity 28–32 m/s Filtration area 6 m² Number of filters 18 Filter material Polyester, 5 microns / filter category "G" Dimensions 752 × 1502 × 2200 mm Weight 220 kg

Condition: new, Year of construction: 2026, The CORMAK ODL4K extraction and filtration system is a modern solution that ensures safe working conditions for operators and effective protection of laser system components against contamination and damage. Filtration at a level of 99.9% removes harmful particles and fumes, guaranteeing clean air in the workplace. ODL4K stands out with an automatic filter cleaning system, an efficient fan, and a compact, solid design that allows for easy integration with various cutting systems. An additional advantage is the ergonomic waste drawer, which allows for quick and convenient emptying of collected waste. The modern ODL4K extraction system ensures effective filtration of contaminants and protection of the most important components of the laser system. ODL4K combines automatic filter cleaning with compressed air, an efficient fan generating high negative pressure and filtration at a level of 99.9% for particles of 0.3 μm thanks to the use of appropriate filters. The system is equipped with an ergonomic dirt drawer, which allows for quick and convenient removal of accumulated dust without the need for disassembly. Additionally, thanks to the modular design, it is possible to mount extraction nozzles on both the left and right side of the device, which allows for flexible adjustment of the installation to the layout of the production hall. ODL4K is a compact, efficient and reliable solution for any laser cutting system - increasing safety, comfort and work efficiency. The main functions of the exhaust gas extraction and filtration system in the laser processing process are: Removal and neutralization of laser smoke. Ensuring work safety at the laser station and in its immediate vicinity. Extending the service life of laser systems by keeping them clean and protecting important components from contamination. The most important advantages of the CORMAK ODL4K extraction system: The extraction system has automatic filter cleaning using compressed air. Under the influence of pressure, the filter is "shaken off", which effectively cleans the filter cartridge and thus extends its service life. Thanks to this, the system maintains its efficiency for a longer period of time. The filter element used in the system is imported and made of high-quality material. The Nano-type fire-resistant filter has high filtration efficiency, retaining particles of 0.3 μm in more than 99.9%. The large dust collection drawer allows convenient collection and cleaning of dust, which makes the system easy to maintain. The motors used in the system are equipped with overload protection, thus ensuring a high level of protection and trouble-free operation. The specially developed high-performance fan wheel generates a large negative pressure, which allows effective removal of laser exhaust gas and ensures high airflow efficiency. The total purification efficiency of the system is 0.3 μm, and the efficiency is more than 99.9%, which shows the high efficiency of the exhaust in removing harmful particles from the air. In addition, it is characterized by a compact structure, which makes it easy to operate and maintain. Technical parameters: Number of filter cartridges 4 Air flow 4000 m³/h Air pressure 3000 Pa Ndodpfxowcdrve Akmsc Filtration efficiency 99.99% Filter size 350x660 mm Fan power 5.5 kW Inlet diameter 250 mm Weight 420 kg Dimensions (L x W x H) 1050 x 1400 x 2250 mm

Condition: new, Year of construction: 2023, power: 7.5 kW (10.20 HP), intake manifold diameter: 300 mm, Exhibition machine, year of manufacture 2023 Technical data DM-300/P-B Motor power 7.5 kW Nominal volume flow 20 m/s, 5089 m³/h Max. air volume flow 6000 m³/h 2700 Pa at 20.5 m/s in dusty conditions Filter area 31.8 m² Filter cleaning: JET cleaning system Residual dust content: less than 0.1 mg/m³ Dust collection volume: 480 liters Sound pressure level: 70 dB(A) Power supply: 400V/50Hz Nominal current: 14.0 [A] 5 m connection cable with 32A CEE plug, 5-pole, with phase inverter Weight: approx. 780 kg Ndjdoz At Nhjpfx Akmec Dimensions (L x W x H), max. 3245 x 1030 x 2595 mm Includes extraction nozzle Extraction nozzle with flange, 300 mm (left) With extinguishing system (no water connection required)

Condition: new, Year of construction: 2026, DCV11300 TC VIBER The DCV11300 TC VIBER is a high-performance industrial dust extraction unit designed for operation under demanding conditions in the woodworking and furniture industries. Equipped with advanced filtration, safety and energy recovery systems, it guarantees reliability, cleanliness and cost efficiency in every production facility. Ndodpoudalwjfx Akmjc Main Advantages of the Machine Extraction capacity of 11,300 m³/h – effective removal of chips, dust and sawdust from multiple workstations. VIBER system – automatic, trouble-free filter shaking ensuring constant operating parameters. DAMAGE PROTECT module – mechanical protection of the impeller against damage caused by solid contaminants. TC housing – effective acoustic insulation and vibration reduction. REHEAT system – recovery of heat from the extracted air for energy savings. Construction and Technology The DCV11300 TC VIBER central dust extraction unit has been designed for many years of trouble-free operation. The heart of the system is an 11 kW motor with a dynamically balanced impeller, ensuring stable and quiet operation. The construction is based on a rigid steel frame with additional inspection doors, making operation and bag replacement easier. Precision and Work Efficiency The high suction velocity of 28–32 m/s and 64 polyester filters (5 microns) ensure effective air purification even in intensively operated facilities. The BIG-BAG system or metal containers on wheels allow for efficient waste removal. Application The DCV11300 TC VIBER is an ideal woodworking dust extraction unit for facilities: producing furniture and wooden components, with multiple workstations, using panel saws, edgebanders, sanders and saws, looking for a central solution (central dust extraction system). Standard Equipment Control cabinet with easy access, Complete set of polyester filters, VIBER system with an automatic cycle, TC sound-absorbing housing, REHEAT and DAMAGE PROTECT modules. Technical Specifications Power supply voltage — 400 V Motor power — 11 kW Rotational speed — 3000 rpm Capacity — 11,300 m³/h Negative pressure — 3000 Pa Noise level — 80 dB Inlet / outlet diameter — 350 mm / 500 mm Filter material — Polyester, 5 microns / filter category "G" Number of filters — 64 pcs. Filter dimensions — Φ160 × 960 mm Overall dimensions — 1190 × 3160 × 2320 mm Net weight — 710 kg

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Year of manufacture: 2022 11 kW motor Ndjdpfxszcgbxo Akmec 350 mm pipe connection Filter area: 71 m² Dimensions: 270 x 120 x 230 cm Weight: 850 kg Chip capacity: 2 x 250 liters Nominal flow rate: 6920 ccm/h Mobile Pneumatic filter cleaning Dry extinguishing system

Condition: excellent (used), Year of construction: 2020, Used Geb. Reinluft dust collector APU 300 P Year of manufacture: 2020 Technical data 300-P Intake nozzle: 300 mm Nsds Afatiepfx Akmsdc Motor rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. volume flow: 6,000 m³ / h Rated volume flow: 5,089 m³ / h Vacuum: 2,280 Pa Filter area: 30 m² Chip collection volume: 3 x 165 L Dimensions (L / W / H) in mm: 2963 x 994 x 2346 Weight: 880 kg Location: Available from stock, 54634 Bitburg Immediately available Subject to prior sale.

Condition: good (used), Year of construction: 2010, Dust extraction, filter ventilation, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum TEKA AIRTECH P18. The main areas of application for these systems are industrial plants/welding shops where it is not possible to implement point extraction or where point extraction is insufficient to maintain air quality in the workshop. Side-mounted ducts with a pollution capture point draw in contaminated air and direct it to the filter section. Here, pollutants in the form of fine particles accumulate on the surface of the cartridge filter. Compressed air pulses clean the cartridge filters automatically at required intervals. After the compressed air hits, the particles collected on the filter surface detach and fall into the dust collection tank. The cleaned air returns to the work area through individually adjustable long-range nozzles. At the same time, the discharge of the cleaned air directs the contaminated air in the workshop towards the extraction ducts. The filter is cleaned by a microprocessor controller with compressed air pulses during operation, which results in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. The AIRTECH series of devices is certified by IFA in accordance with EN ISO 15012-1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent, local welding fume extraction unit. Parameters: Capacity - 18,000 m3/h Motor power - 11 kW Vacuum - 2250 Pa Filtration area - 324 m2 (9 filter cartridges, each 36 m2) Fan in a sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Year of manufacture - 2010 Dimensions: Height - 5.00 m Base width - 1.44 m x 1.44 m Width with outlet ducts - 8.5 m Ndodpfoib Dadjx Akmoc Total weight approximately 2400 kg

Condition: used, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: radial fan -Motor: Loher 7.5 kW 1445 rpm -Volume flow: m³/h -Number: 2x fan available -Price per piece -Dimensions: 895/895/H865mm Ndjdpfx Aket Hy Ufsmjc -Weight: 171 kg/pc.

Condition: used, Year of construction: 2008, type of input current: three-phase, filter area: 252 m², suction capacity: 16,000 m³/h, Extraction unit, dust collector, work station Donaldson Torit ECB-2. The ECB work station is ideal for finishing work on large components with irregular shapes. This efficient, flexible, and cost-effective self-contained workstation is engineered to remove fine airborne dust without restricting operator movement or visibility. Thanks to Donaldson’s patented filter media, no other standalone workstation offers a more effective or efficient dust filtration system. The Donaldson ECB is a budget-friendly choice for autonomous workstations. There is no need for duct installation, which reduces installation costs. The ECB further saves costs by recirculating cleaned air, helping to reduce energy expenses. Operators can be more productive when working in a cleaner and safer environment. Designed as a standalone unit, the Donaldson ECB booth is the ideal solution for work environments that require maximum flexibility. It can boost productivity by adapting to the requirements of almost any task, and is easy to relocate, allowing for adjustment to changes in plant layout. Brand: Donaldson Torit Model: ECB-2 Year of manufacture: 2008 Specifications: EX fans – 2 x 4 kW Capacity – 2 x 8,000 m³/h (16,000 m³/h total) Option to operate with a single fan Filtration area – 252 m² Donaldson Ultra WEB filter cartridges – 12 pcs Inventory number: 1041 Nodpfx Akjx Hf Rnjmsdc

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total width: 2,490 mm, total height: 2,700 mm, The M.A.L. Mechatronic industrial vacuum cleaner is a mobile, high-performance suction and recovery system for abrasive blasting media and industrial waste. The system operates with a powerful vacuum technology, generating up to 650 mbar of negative pressure, and achieves air flow rates of up to 5,700 m³/h. The integrated H13 filter technology with a separation efficiency of 99.995% ensures the safe removal of even the finest dust particles. The robust steel frame construction allows for use under demanding industrial conditions. The system is particularly suitable for blasting and surface treatment processes where abrasive blasting media should be economically recovered and reused. Immediate purchase possible. Ndodozarwgjpfx Akmjc Rental available, daily or monthly, upon request.

Condition: new, Year of construction: 2026, The CORMAK ODL6K extraction and filtration system is a modern solution that provides safe working conditions for operators and effective protection of laser system components against contamination and damage. Filtration at a level of 99.9% removes harmful particles and fumes, guaranteeing clean air in the workplace. Ndjdowcd I Rjpfx Akmec The ODL6K is distinguished by an automatic filter cleaning system, an efficient fan, and a compact, solid design that allows for easy integration with various cutting systems. An additional advantage is the ergonomic waste drawer, which allows for quick and convenient emptying of collected waste. This is a comprehensive solution that increases safety, improves work efficiency and extends the service life of laser systems. The ODL6K combines automatic filter cleaning with compressed air, an efficient fan generating high negative pressure and filtration at a level of 99.9% for particles of 0.3 μm thanks to the use of appropriate filters. The system is equipped with an ergonomic dirt drawer, which allows for quick and convenient removal of accumulated dust without the need for disassembly. Additionally, thanks to the modular design, it is possible to mount extraction nozzles on both the left and right side of the device, which allows for flexible adjustment of the installation to the layout of the production hall. ODL6K is a compact, efficient and reliable solution for any laser cutting system - increasing safety, comfort and work efficiency. The main functions of the exhaust gas extraction and filtration system in the laser processing process are: Removal and neutralization of laser smoke. Ensuring work safety at the laser station and in its immediate vicinity. Extending the service life of laser systems by keeping them clean and protecting important components from contamination. The most important advantages of the CORMAK ODL6K extraction system: The extraction system has automatic filter cleaning using compressed air. Under the influence of pressure, the filter is "shaken off", which effectively cleans the filter cartridge and thus extends its service life. Thanks to this, the system maintains its efficiency for a longer period of time. The filter element used in the system is imported and made of high-quality material. The Nano-type fireproof filter has high filtration efficiency, retaining particles of 0.3 μm in more than 99.9%. The large dust collection drawer allows convenient dust collection and cleaning, which makes the system easy to maintain. The motors used in the system are equipped with overload protection, thus ensuring a high level of protection and trouble-free operation. The specially developed high-performance fan wheel generates a large negative pressure, which allows effective removal of laser exhaust gas and ensures high airflow efficiency. The total purification efficiency of the system is 0.3 μm, and the efficiency is more than 99.9%, which shows the high efficiency of the exhaust in removing harmful particles from the air. In addition, it is characterized by a compact structure, which makes it easy to operate and maintain. Technical parameters Number of filter cartridges 6 Air flow 6000 m³/h Air pressure 3000 Pa Filtration efficiency 99.99% Filter size 350x660 mm Fan power 7.5 kW Inlet diameter 300 mm Weight 590 kg Dimensions (L x W x H) 1150 x 1950 x 2250 mm

Year of construction: 2025, condition: like new (used), For sale is a mobile dust extractor from the manufacturer Blotenberg, model FILTERBLOC MOBIL-3000, with 0 operating hours. The unit has sustained minor damage, presumably from a collision, but this is not expected to affect its functionality. Manufacturer: Blotenberg Model: FILTERBLOC MOBIL-3000 Date of manufacture: 04/2025 Ndsdpfx Akoz R Dhpsmsc Article number: OEM-7094 Power: 3.0 kW Voltage: 400 V Phases: 3P+PE Frequency: 50 Hz Protection class: IP55 Nominal air volume: 3,200 m³/h Max. negative pressure: 2,500 Pa Max. raw air connection: Ø 224 mm Filter area: 20 m² Weight: 180 kg Operating hours: 0 h Design: Mobile, can be moved Application: Extraction of dry, free-flowing dust and fumes Condition: Unused, with minor collision damage Documentation: Operating and maintenance manual available

Condition: new, CATALOGUE NUMBER: HZ017 PRODUCT FEATURES As standard, the machine is equipped with mobile sawdust containers featuring a clamping system that allows for a tight connection between the container and the machine structure. This enables high vacuum levels to be achieved without pressure losses at the individual connection points. Contaminants from the filter fall directly into airtight containers with the possibility of rapid unloading. These containers have a special suspension system and mobile wheels, allowing for easy and quick transport and maneuvering. The 5.5 kW / 6500 m3/h vacuum fan operates at 2,800 Pa and is based on a turbine principle. The noise-dampened fan design significantly reduces noise emissions during operation. A certified control cabinet allows for continuous monitoring of proper operation, thanks to the possibility of positioning it remotely from the machine. As standard, it includes an integrated system for controlling fan operation and a system for cleaning the filter fabric. ADVANTAGES - New machine - CE certificate - High efficiency - Professional Scope of delivery: Polyester filter, 5 microns 2 containers Undercarriage Filter cleaning using a vibration system with control TECHNICAL DATA Extraction capacity approx. 8900 m3/h Motor power 7.5 kW Rotational speed 3000 rpm Voltage 400 V, 50 Hz Extraction nozzle 300 mm Filter area 20 m2 Extraction speed 28 m/s Number of filters 45 Nedpjx Ux E Iefx Akmedc Vacuum 2800 Pa Filter category G Filter material Polyester Dimensions L/W/H 921x2342x2304 mm Weight 500 kg Net price: 18990 PLN Net price: 4420 EUR Net price calculated based on an exchange rate of 4.3 PLN/EUR (Prices may be subject to change in the event of significant exchange rate fluctuations)

Year of construction: 2000, condition: used, centrifugal fan, dust extraction fan, fan, suction, dust blower -Manufacturer: Rippert, centrifugal fan in soundproof housing Njdpfx Akelzmylemsdc -Type: HL560/710-200 -Motor: 5 kW 1435 rpm -Volume flow: 12,000 m³/h -Inlet/Outlet connection: Ø 500 mm, see photos -Dimensions: 1945/1515/H2350 mm -Weight: 600 kg

Condition: used, Welding fume extraction, filtration unit, dust extraction by LINCOLN NORWELD Central extraction system, extraction plant, silo filter, cartridge filter, pulse jet filter, dedusting filter Type FU-80-A Serial no. 001799 Year of manufacture: 1996 Airflow rate max. 6000 m³/h (depending on fan capacity) Filter area 80 m² (4 units of 20 m² each) Extraction inlet at filter entry Ø 250 mm Exhaust outlet at filter exit Ø 250 mm Compressed air connection 4 bar - without fan, without filter control - Filter category C, 99.9% separation efficiency - Pneumatic filter cleaning - Filter inlet with pneumatic shut-off valve - 4 used filter cartridges, Ø 325 mm, length 1200 mm - Service access hatch 240 x 240 mm Space required (L x W x H): 1400 x 1600 x 2970 mm Weight: approx. 300 kg In good condition Njdpfxjxf Up Ie Akmjdc

Condition: used, Year of construction: 2021, functionality: fully functional, intake vacuum (max.): 32 mbar, suction capacity: 3,500 m³/h, actuation type: electric, Dust extraction unit, dust collector, wet separator for aluminum and explosive dusts, manufactured by the renowned brand TEKA. Model: WNA AL 3500 Designed for cleaning dust with special properties, particularly explosive dusts. High-performance wet dust collector, operates on the principle of centrifugal separation. Ndsdpfx Ajzq A Ezskmjc The advantage of this unit is its simple and reliable operating principle. The unit does not have pumps or nozzles that could interfere with its operation. Air is cleaned by swirling the dust with water. Dust particles in the air stream are captured and bound by water molecules. The separated dust settles as sludge in the bottom tank and can be removed from there. The fan is designed for continuous operation and is standard equipment on the unit. Unit parameters: Capacity - 3500 m3/h Vacuum - 3200 Pa Fan with a power of 4 kW Year of manufacture: 2021

Year of construction: 2012, condition: good (used), functionality: fully functional, For sale is a CFT compact filter technic top-mounted dust extraction system, type HKAF 12-30 The system is fully functional and ready for use immediately after connection All documentation for the system available thanks to CFT Digital Contact details can be passed on after purchase. Technical data: Year of construction: 2012 Length: 2476 mm Width: 1277 mm Height: 2330 mm Weight: 600 kg Exhaust air flow rate: 28 m3/min Filter elements: 12 pieces Filter area: 30 m² Filter material PMB 600*500 Shock valves: 4 pieces Rotary cycle control unit: 12 cycles Compressed air parameters: 4.5 bar Loading & or shipping possible for an additional charge Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Ndsdpfxorfcpme Akmoc Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, Industrial Dust Extraction System, Dust Collection Unit, CORAL POLIVAL 2 ADPE, Used Machine Ndjdozh H Ubepfx Akmoc Manufacturer CORAL S.p.A. (Italy) Model POLIVAL 2 ADPE Technical Specifications Serial Number: 00000201 Rated Power: 4.0 kW Motor Speed: 2800 RPM (high-speed, high-suction fan) Operating Voltage: 400 V, Three-phase Construction: Weather-resistant, modular galvanized steel housing Extraction Surface: 3700 × 1100 mm Version: ADPE – designed for the safe extraction of potentially explosive fine dust Overall Dimensions Width: 3160 mm Depth: 1100 mm Height: 2010 mm Filter Unit Dimensions Width: 2930 mm Depth: 1100 mm Height: 950 mm

Condition: used, Year of construction: 1991, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan Nedpotz Hu Ijfx Akmsdc -Manufacturer: Novenco, dust extraction fan radial fan type CNA-400 REX / AZG-S -Engine: 1.35 kW 955 rpm -Volume flow: 5000 m³/h -Connection: inlet Ø 400 mm -Connection: Output 390 x 280 mm -Dimensions: 1030/590/H800mm -Weight: 70 kg