Used Vacuum Filler for sale (4,117)

Condition: used, Year of construction: 2021, Overview  This isobarometric filler was built in 2021 by the German manufacturer Markl. It can fill cans abd glass bottles. This filler is available because the seller is selling the complete equipment. It has only a few operating hours and can be viewed in person at any time.   Technical Details  Type: Isobarometric filler for bottles and cans Capacity: 8,000 bottles / hour (depending on format) Number of filling valves: 20 Formats:  Bottles: 0.33 L Longneck and 0.75 L Cava Cans: Standard 0.33 L and 0.44 L Counter-pressure filler Running direction: left - right Dimensions (L x W x H): 2.0 m x 1.8 m x 2.5 m Operating History: In operation: June 2021 – June 2024 Last production run: June 2024 Dismantled: February 2025 Estimated total working hours: approx. 625 hours (~500,000 liters filled at 2,500 units/hour) Good condition, ready for reinstallation. Gtsdpjt Rmhmsfx Af Nst

Condition: used, operating hours: 555 h, Laska Bowl Cutter Gtjdpfxjx Up Its Af Nst -Type: KU 200 V DC -Power: 103 kW -Bowl capacity: 200 L -Knife speed control (up to 4000 rpm) -Bowl speed control (4-14 rpm) -Made of stainless steel -With loading -With technical documentation -With vacuum -Weight: 4300 kg -Power supply: 400V 50Hz -External dimensions: 3850 x 2650 x 1750 mm -Number of hours worked: 555 -Condition: Used in very good condition, ready to work

Condition: excellent (used), Year of construction: 2023, Type: MIX-180V Serial number: 2440 Year of construction: 2023 Gedpfxsx Ttwpe Af Nott Mixer: 180 litres, double paddle Mixing speed: 6 - 60 RPM, frequency controlled Vacuum pump: Busch 21m³/h Compressed air: 6 Bar Power: 3 x 400V, 50Hz, 3kW Dimensions: 1750 x 850 x 1450 mm Weight: 388 kg Machine in new condition, only 8 working hours!

Condition: used, Vacuum Pump V-700 specifications: Dimensions (W × H × D): 180 × 276 × 209 Gtedpfx Asx Uxr Ujf Not Weight: 5.3 kg Connection voltage: 100–240 V / 50/60 Hz Power consumption: 210 W Environmental conditions: For indoor use only 10–40 °C, up to 2000 m, maximum relative humidity 80% for temperatures up to 31 °C, and then linearly decreasing to 50% at 40 °C Ultimate vacuum (absolute): < 10 mbar Ultimate vacuum (with gas ballast): 24 mbar Volume flow rate: 1.8 m³/h Vacuum connection: GL-14 Motor: brushless DC motor Revolution speed: max. 1600 rpm min⁻¹ Sound level: 40–52 dB dependent on operation mode Installation category: II Pollution degree: 2 Degree of protection: IP 34 Noise level: < 70 dB Good working condition. Please check out our other listings as well.

Condition: used, machine/vehicle number: YS2G8X4000217xxxx, mileage: 4,000 km, Year of construction: 2025, Please contact ATS Norway for more information Please provide reference number upon request: 21046 Chassis Specifications: Model: Scania G 500 B8x4*4NB Engine: DC13 165 Euro 6, 500 hp / 2550 Nm, XPI injection and SCR exhaust after-treatment Gearbox: GRSO905R, 12-speed with range/split, crawler gear, overdrive and retarder Gearbox Control: Opticruise automatic gear shifting (Standard, Power, Off-road programs) Chassis number: YS2G8X40002175173 Gedpfxew Ia Ics Af Nett Dimensions: Length 10,155 mm, width 2,540 mm Wheelbase: 4,150 mm Gross Weight: 38,000 kg, payload 15,725 kg Suspension: Air suspension on all axles Rear Axle: RBP735 + RP735 with hub reduction, ratio 4.05:1 Power Take-Off (PTO): ED120P engine-mounted for hydraulic pump EG662F gearbox-mounted (rear) EK730P flywheel-mounted (position 12 o’clock, 1:1 ratio) Cabin: CG17N Medium sleeper cab with air suspensionAir Conditioning: Automatic climate controlBrakes: EBS with disc brakes on all axles, retarder (3500 Nm)ADR Approval: Types FL and EX/IIIFuel Tank: 350 litres aluminium (left side)AdBlue Tank: 80 litres (60 litres usable) Body Specifications: Type: Rigual CL3644D Vacuum and Jetting Combination Truck Tank Material: Stainless steel Capacity: Total 18,000 litres Main tank divided into: 10,000 + 3,000 litres for sludge 5,000 litres clean water in stainless side tanks Vacuum Pump: HIBON VTB 820 XL lobe pump Vacuum capacity: -0.9 bar, 2674 m³/hour High-Pressure Pump: URACA P3-45 Working pressure: 10–200 bar, automatic regulation Hose Reel (rear hatch): Two-part reel Large side: 150 m x 1" diameter hose Small side: 70 m x ½" diameter hose Reel...

Condition: new, ➡️ BUSCH R5 VACUUM PUMP ➡️ RA 0040 F 503 ➡️ NEW ➡️ Gtodpewdkl Eofx Af Not

Condition: new, Year of construction: 2025, Thanks to the many years of experience of our CORMAK team, radial fans from the FAN series have been developed. The most powerful centrifugal fan FAN7,5 reaches a capacity of up to 10562 m3/h. The radial fan has been developed for use in the carpentry, furniture, automotive, agricultural and manufacturing industries. Product characteristics: The Radial Fan can transport air whirl sawdust dust and other substances such as smoke or harmless gases. It is widely used for ventilation in industrial lumber companies, carpentry, mining, large buildings, hotels, restaurants, etc. Thanks to its construction and reinforced balanced impeller with many blades, it guarantees stable, quiet and vibration-free operation. The high efficiency of the fan due to the suitable shape of the blades significantly reduces the consumption of electricity without changing its high performance. APPLICATION OF THE FAN production of various types of materials transport to dehumidifiers and drying systems. carpentry - transport of chips, sawdust, dust agricultural industry - transport of fine granulates, manufacturing - transport of polystyrene granulates, etc. automotive industry - transport of dusty air, impurities Gtjdpfxjvugrds Af Njt Technical parameters: MAX. AIR CAPACITY max. 10562 m3/h inlet diameter 340 mm outlet diameter 350 mm PRESSURE 2554 - 1673 Pa DIMENSIONS 810x900x980 mm MOTOR POWER / VOLTAGE 7.5 kW WEIGHT 125 kg

Condition: used, Used dissolver by Drais (DE) model RN 3-45 AS VAC. Contact parts designed in carbon steel. Machine is designed for work on vacuum. Mixer has single shaft with working length 105 cm and toothed disc with diameter 690 mm. Shaft is driven by el motor 45 kW, 1460 rpm, 400/690 V, 50 Hz. Working rotation of shaft up to 600 rpm. Mixer has also side wall scrapper, driven by el motor 1.5 kW, 1410 rpm, 440 V, 50 Hz and gearbox. Working rotation of scrapper up to 26 rpm. Machine has top cover and mixing pan with total volume 2000 l. Mixing pan has internal diameter 1465 mm x length of straight side of wall 1160 mm. Mixing pan has two side wall discharge outlets with valves, and bottom supports for work with forklift. Dissolver is rised/lowered hydraulically. Rise up to 145 cm. Hydraulic pack is driven by el. motor 1.5 kW, 1420 rpm, 230/400 V, 50 Hz. Mixer is equipped with vacuum pump by Tepro (PL) and local control panel. Last time used in chemical industry. Gtsdpfx Afsx Niyxe Not

Year of construction: 2026, condition: new, machine/vehicle number: 1234, Semi-manual filling machine for vacuum bags The BIB'UP® semi-manual filling machine is perfect for the small and medium-sized production of BIB-type vacuum bags from 2 to 20 liters and Pouches from 1.5 to 3 liters. Specificities Operation in three steps : removal of tap, start of cycle (air removal from pouch, metering and filling, injection, sweeping, blowing of nitrogen at end of cycle), reinsertion of tap. High rates and efficiency Reliable filling machine, mobile and very easy to use BIB 3L Bags 280/290 filling rate /hour 5L Bags 250/260 filling rate /hour 10L Bags 200/210 filling rate /hour 15L Bags 160/175 filling rate /hour 20L Bags 140/150 filling rate /hour Pouch 1.5L 270/270 filling rate /hour 3L 245/250 filling rate /hour Specifications: Liquid output : 54 HL/h Air supply : 6 to 6.5 bars Air flow : 0.25 m³/h Nitrogen supply : 0.5 to 1 bars Nitrogen flow : depends on final installation Power supply : 230 V 50 Hz. Pulse counter (72 points per liter) Connection : liquid input through Æ Macon 40 male connector Noise level < 80 db Footprint : Depth : 720 mm Height : 1420 mm Width : 520 mm Godeiu Hxkspfx Af Nott Weight : 55 kg (without option)

Condition: used, functionality: fully functional, With this offer, you are purchasing a used Ricoh Pro C7100SX colour production system. Gtsdpex Svxasfx Af Not Item for sale: 1 x Ricoh Pro C7100SX with the following equipment: Includes Prinect controller Includes TR5040 trimmer Includes SR5060 booklet finisher Includes FD5020 multi-folding unit Includes LCIT RT5100 vacuum feed Not the right equipment? It is no problem to configure the machine according to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 2,569,030 pages Colour: Approx. 1,124,518 pages Black: Approx. 1,444,512 pages Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test printout can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Year of construction: 2011, condition: used, Serial number: 2xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20426 Specifications: Gtsdpfx Aewi Rxijf Nst - 2011 model - 845 kg - 9.6kW - Max lifting capacity of 140 kg - Ready to ship Description: We have a 2011 Hinowa TP2000 Vacuum lifter for stone slabs for sale. Everything works as it should according to the owner. Efficient vacuum lifter that makes the job much easier for the gardener who will carry out the job. Ready to ship Own weight: 845 Total Weight: 845 Kw: 9.6 Model: TP2000 Vakumløfter til steinheller

Condition: excellent (used), System is like a new, very high quality. Including: 5 inch tube 31m, 4 inch tube 40m and 3 inch tube 41m Lot of standard radius elbows for these 3 diameters, standard 90 degree ty's, standard reducing couplings, compression couplings, threaded inlet valves etc. Godpsx Anthjfx Af Njtt

Condition: new, Year of construction: 2025, Thermal winding protection against overload. The extraction design has been enhanced with additional anti-vibration feet in the base to guarantee stable and vibration-free operation of the unit. The most powerful radial fan FAN11 achieves an output of up to 15445 m3/h. The Radial Ventilator can transport air chips sawdust dust and other substances such as smoke or harmless gases. It is widely used for ventilation in industrial lumber companies, carpentry, mining, large buildings, hotels, restaurants, etc. Gtodpevugfwefx Af Nst Thanks to its design and reinforced balanced impeller with many blades, it guarantees stable, quiet and vibration-free operation . The high efficiency of the fan due to the suitable shape of the blades significantly reduces the consumption of electricity without changing its high performance. APPLICATION OF THE FAN production of various types of materials transport to dehumidifiers and drying systems. carpentry - transport of chips, sawdust, dust agricultural industry - transport of fine granulates, manufacturing - transport of polystyrene granulates, etc. automotive industry - transport of dusty air, impurities

Condition: excellent (used), Edwards GV80 EH1200 vacuum pump GV80/EH1200+TCV.BYPASS+SIL+SSP+PANEL Design pressure: full vacuum up to 0.5 BARG Serial number: 086236921 Year of manufacture: 2008 Gsdox Nglxepfx Af Nott

Year of construction: 2026, condition: new, Specifications: Gtjdpfjfkz Tqjx Af Nst - Performance: 200-600 bottles/h - Nominal performance: 300 L/h - Electric demands: 0,1 kW, 24 V - Material: WNr. 1.4301, AISI 304 stainless steel, food industrial PP - Dimensions: 350x1100x1250 mm - Weight: 40 kg - Connections: DN 65 - IP65 certified electronics - Filling type: Volumetric - Filling accuracy: +-0,5% - Filling temperature: 0-100°C - Filling range: 5g-35.000g Automatic heat control, very easy to clean. It requires minimal maintenance. The impeller functions as a self-priming pump, and as a flowmeter. Ideal for high viscosity materials like honey, jam, pulp, etc… The filling method is semi-automatic, thanks to the end switch. Between two jars the nozzle closed without trickles. AUTOMATIC turntable with capacitive sensors. Allows operating without human intervention.

Condition: used, With this offer, you are purchasing a used Ricoh Pro C7200 colour production system. Item for sale: 1 x Ricoh Pro C7200 with the following equipment: Includes Fiery Controller E-45A Gsdpfx Asx Svraef Njtt Includes Vacuum Feed LCIT RT5120 Includes Finisher SR5050 Not the right equipment? It is no problem to configure the machine according to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 3,001,758 pages Colour: Approx. 2,334,341 pages Black: Approx. 667,417 pages Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test printout can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: used, machine/vehicle number: YV2AG30G3AA70xxxx, mileage: 2,03,607 km, Year of construction: 2011, Please contact ATS Norway for more information Please provide reference number upon request: 21178 Specifications: Model year: 2011 Mileage: 203,607 km Euro 5 I-Shift automatic gearbox Power: 510 hp Driveline: 8x4 Gtsdpfx Afsw Sc Rho Njt Tires: See pictures Superstructure: 2010 Inter Consult Vacuum and jetting unit Hose reel Hydraulic boom Acid-resistant tank Steering rear (4th) axle Tank compartments: Compartment 1: 5,000 liters Compartment 2: 10,000 liters Compartment 3: 3,000 liters Valid ADR (missing annual inspection) Front suspension: Steel Rear suspension: Air Air conditioning Radio Work lights Ready for delivery Description:2011 Volvo FH500 8x4 vacuum truck with 2010 Inter Consult body.Equipped with suction and high-pressure system, hydraulic boom, and acid-resistant tank.ADR approved but lacks the latest annual check.All systems are reported to work as they should.Service has been performed regularly by the owner. Km: 203607 HK: 509 Technical approved: Yes EU-approved until: 05.09.2026 Own weight: 20970 Total Weight: 37500 Payload: 16455 Width: 255 Length: 1074 Euro: 5 Model: fh500 8x4 Slamsuger m/ 2010 Inter consult påbygg Gearbox: Automatic

Condition: used, functionality: fully functional, For Sale: Hydraulic unit - Herion 6360344 fully functional Condition: Excellent, regularly serviced Testing: Available at seller’s location Location: Autoliv Poland Sp. z o.o., ul. Belgijska 2, Jelcz-Laskowice, Poland Gedpfx Afex Tdx Re Njtt We invite you to visit our facility where the machine is currently stored. Agreed price should include logistics cost on customer side. Two pieces available

Condition: new, Year of construction: 2025, The most powerful centrifugal fan, the FAN5.5, achieves a capacity of up to 7419 m3/h. The design of the new technology line has enabled us to develop the LineWind metal turbine system. This is the most important feature of the radial fans, enabling them to extract all sorts of pollutants with increased vacuum power, thanks to a special blade system that has been profiled at an appropriate angle. The Radial Ventilator can transport air chips sawdust dust and other substances such as smoke or harmless gases. Thanks to its construction and reinforced balanced impeller with many blades, it guarantees stable, quiet and vibration-free operation. The high efficiency of the fan due to the suitable shape of the blades significantly reduces the consumption of electricity without changing its high performance. APPLICATION OF THE FAN production of various types of materials transport to dehumidifiers and drying systems. carpentry - transport of shavings, sawdust, dust Gtjdpfx Asvugh Esf Njt agricultural industry - transport of fine granulates, manufacturing - transport of polystyrene granulates, etc. automotive industry - transport of dusty air, impurities Technical parameters: MAX. AIR CAPACITY max. 7419 m3/h inlet diameter 300 mm discharge diameter 250 mm PRESSURE 2014 - 1320 Pa DIMENSIONS 750x750x830 mm MOTOR POWER / VOLTAGE 5.5kW WEIGHT 110kg

Condition: good (used), Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor, conveyor belt with vacuum connection Gtodpfx Aexrnpbof Net -Belt conveyor: Vacuum part area for the suction of the material to be conveyed -Belt width: 150 mm -Conveyor length: 635 mm -Drive shaft: Ø 30 x 150 mm -Dimensions: see photos / technical drawing -Dimensions: 530/400/H350 mm -Weight: 43 kg

Year of construction: 2026, condition: new, Modern and an outstanding performer, the semi-manual filling machine is perfect for the small and medium-sized production of BIB-type vacuum bags from 2 to 20 liters and Pouches from 1.5 to 3 liters. Manual work needs only for put in and take out the bags. After the filling head placed right to the bag, it sucks vacuum and does the filling. When the filling is finished, the machine allows to use nitrogen gas injection in the bag. With this filling method, the user can maximize the shelf life of the end product Very easy to clean. It requires minimal maintenance. Specifications: - Performance: 180x3L BiB /h - Electric demands: 0,1 kW, 230 V - Filling temperature: up to 95°C - Filling volume: 1,5-20 L - Filling accuracy: +-1% - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: D: 760 mm x H: 620 mm x W: 580 mm - Weight: 30 kg - Compressed air needs: max 250 L/h Gtjdpfx Afsff Aixs Not - Compressed air pressure: 6-6,5 bar - Nitrogen valve - Vacuum valve - Connections: DN25 or Garolla 40 - Needs an input stream of 2 bars - For Vitop© taps - CIP cleaning system - Only for low-density materials (fluids) - compact filling machine - efficient and very easy to use

Condition: new, Year of construction: 2025, CORMAK C2030 CNC milling machine is intended for machining and cutting wooden materials, particleboards, MDF, OSB, plywood, plastics, PVC, acrylic glass. Device mainly designed for usage in furniture and modelling industries. 2100×3100 mm working table. Gedsiz A Rqjpfx Af Njtt The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. Check our offer on our website.

Condition: good (used), Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor, conveyor belt with vacuum connection Gjdpfxoxu Ehye Af Nett -Belt conveyor: Vacuum surface for suctioning the material to be conveyed -Feed belts: 3 pieces, length 1840 x 30 mm -Drive shaft: Ø 30 x 100 mm -Individual components: see photos -Dimensions: 1840/570/H285 mm -Weight: 129 kg

Condition: new, Year of construction: 2025, Efficient and precise CNC CORMAK C1325 BSP milling plotter, equipped with SERVO drives as standard, has a structure made of steel and cast iron, which ensures adequate rigidity and resistance to overloads arising during operation. It is designed for processing and cutting wooden materials, chipboards, MDF, OSB, plywood, PVC, plexiglass and dibond. For each machine, training is included in the price at our headquarters! Gtjdpsiz A Ezefx Af Net Construction Welded steel rigid structure, The arms of the gate are made of hardened, thick, powder-coated sheet metal, which has increased stiffness, which translates into the quality of the processed detail. Workbench The work table was made in hybrid technology, It has T-slots for manual clamping material with dimensions of 1300 x 2500mm, Drive Engines used to drive high-power machine tools provide appropriate acceleration and speed in individual directions. The X and Y axes feature high-quality HIWIN toothed racks praised by users, which ensure high durability and precision, All axes move on rail guides. Machine equipped with tool height sensor Linear bearing: trapezoidal rails Spindle High quality spindle that is durable. Additionally equipped with an air cooling system The construction of the spindle uses high-quality sealed bearings, characterized by very quiet operation and guaranteeing increased durability. Tool height measurement sensor - included. Spindle speed range is 4,500 to 18,000 rpm. Tool clamping with 3 pcs ER32 collets, diameters 1/8", 1/2" and 5-6mm Software The machine is equipped with ARTCAM PRO software as standard Optional available: UCANCAM V11 CAD/CAM CNC software in Polish version The software enables quick and easy design of elements, which the program then converts into the so-called. G-code. It is also possible to import ready-made files from other programs. DSP control Digital Signal ProcessingDigital Signal Processing The DSP controller of the machine has its own processor and operating memory, which ensures trouble-free operation and simple operation of the machine. The driver ensures smooth operation of the device and accuracy in machining. There is no need to reinitialize the program after a power loss. The memory built into the controller allows the machine to work without having to load the program each time. Technical parameters Spindle 5.5kW / 18000rpm. inverter, air-cooled Workspace 1300x2500mm Maximum spindle height 350mm Control DSP Software resolution 0.001mm Software complete Power 400V Weight 980 kg Machine dimensions 2100x3100x2200mm Table height 715mm Guides linear Transfer toothed rack ATTENTION! The machine is equipped with the function of remembering the last track of the G-code. In the event of a power failure or interruption, it restarts from the last point without losing time or material. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. Check our offer on our website.

Year of construction: 2009, condition: good (used), Vacuum lifter, vacuum lifting device, vacuum suction cup, plate lifter -Manufacturer: Rice, -Description: Vacuum lifting device without control -Previous use: Handling of solar panels -Condition: very good, only been in use for a few months -Vacuum pump: Becker Vt 4.16 0.55 kw -Steering: -Suction cups: Ø 25 mm -Lifting device: travel Z= 1780 mm -Individual components: see photos Gtodpotpyqusfx Af Njt -Dimensions: 3000/850/H2480 mm -Total weight: 580 kg