Used Vahle Ksl 4 60 for sale (70,220)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, operating hours: 9,472 h, load capacity: 3,000 kg, lifting height: 5,390 mm, free lift: 1,679 mm, fuel type: electric, mast type: triplex, construction height: 2,460 mm, gearing type: other, battery capacity: 775 Ah, battery voltage: 80 V, fork length: 14,05,01,400 mm, tire condition: 70 %, front tire type: superelastic tires (black), front tire size: 250/60-12, rear tire type: superelastic tires (black), rear tire size: 18x7-8, overall weight: 5,518 kg, total height: 2,460 mm, total length: 2,700 mm, total width: 1,300 mm, fuel: electricity, Equipment: cabin, sideshift, STILL RX 60-30L/6354 2014 – Electric 4-wheel forklift TECHNICAL DATA Lifting capacity: 3.000 kg Lifting height: 5.390 mm Closed height: 2.460 mm Free lift: 1.679 mm Mast: Triplex (3F539) Fork length: 140.501.400 mm Fork carriage: 3A Drive: Elektro Battery: 80V/775 Ah v. 2014 Charger: 1500479 , D80V/100A ecotron Transmission: Impuls Tyres: Superelastik weiß 250/60-12 (70%) / 18x7-8 (40%) Service weight: 5.518 kg Length: 2.700 mm Width: 1.300 mm Year of manufacture: 2014 Operating hours: 9.472 h Condition: working condition EQUIPMENT 3rd valve, 4th valve, Heating, Full cabin ATTACHMENTS Sideshift, Fork positioner Rental truck – Rental price on request. Fjdpfxez Ap Ums Ap Degh Internal no.: 1307099 Location: 14974 Ludwigsfelde bei Berlin Price on request. Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 5,866 h, load capacity: 2,500 kg, lifting height: 4,850 mm, free lift: 1,450 mm, fuel type: electric, mast type: triplex, construction height: 2,270 mm, battery capacity: 620 Ah, battery voltage: 80 V, fork length: 10,04,01,200 mm, tire condition: 10 %, front tire type: superelastic tires (black), front tire size: 23x9-10, rear tire type: superelastic tires (black), rear tire size: 18x7-8, overall weight: 4,964 kg, total height: 2,270 mm, total length: 2,450 mm, total width: 1,200 mm, fuel: electricity, Equipment: cabin, sideshift, STILL RX 60-25 / 6345 – Electric 4-wheel forklift TECHNICAL DATA Lifting capacity: 2.500 kg Lifting height: 4.850 mm Closed height: 2.270 mm Free lift: 1.450 mm Mast: Triplex (3F485) Fork length: 100.401.200 mm Fork carriage: FEM 2A Drive: Elektro Battery: 80 V/620 Ah (2017) Charger: 80 V, Stecker 320 A schwarz IP23, 150V Tyres: Superelastik 23x9-10 (10 %) / 18x7-8 (10 %) Service weight: 4.964 kg Length: 2.450 mm Width: 1.200 mm Year of manufacture: 2017 Operating hours: 5.866 h Condition: working condition Fsdpfez Ap Uajx Ap Degh EQUIPMENT 3rd valve, 4th valve, Rear work lights, Front work lights, Heating, Full cabin ATTACHMENTS Sideshift, Fork positioner Rental truck – Rental price on request. Internal no.: 1308679 Location: 14974 Ludwigsfelde bei Berlin Price on request. Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), Number of axes: 3, connected load: 30kVA, control: Hurco Ultimax 4, weight: approx. 10.5t, equipment: chip conveyor, full enclosure cabin, electronic handwheel/control panel, coolant system, tool magazine. The machine should be overhauled, electronic components such as the mainboard and hard drive have been replaced repeatedly. An on-site inspection is possible. Fgjdpfx Apsy Tx Nqo Deh

Condition: ready for operation (used), functionality: fully functional, mileage: 1,93,044 km, power: 125 kW (169.95 HP), first registration: 08/1999, fuel type: diesel, empty load weight: 9,290 kg, overall weight: 15,000 kg, tire size: 11 R 22,5, axle configuration: 4x2, color: orange, gearing type: mechanical, suspension: steel, number of seats: 2, Year of construction: 1998, Equipment: ABS, cabin, differential lock, * German vehicle, * double H-shift gearbox, * leaf spring suspension, Bucher Aufbah * Cityfant 60 * front disc brush * second disc brush * cylindrical brush * 11,248 operating hours * water tank * spray system * 4-cylinder Mercedes-Benz auxiliary engine * belt drive for suction unit. Fsdpew Nhmvjfx Ap Dogh The vehicle is in exceptionally good condition for its year, several spare brushes are available. !!!!! New MOT (TÜV) available at extra cost!!!!!

Condition: excellent (used), NH3 (ammonia) net belt width 600 mm spiral belt with 19 tiers 150 kW product height: ± 55 mm Fodjiimu Iopfx Ap Djgh Belt length 290 m with belt washing systems

Condition: excellent (used), Year of construction: 2004, clamping force: 1,000 kN, Arburg 420C-1000-60-150 ( 123) 2-component with robot and cage Year of production: 2004 TECHNICAL DATA Screw Dia [mm]: 18/30 Shot Weight [g]: 17/65 Fgodpfx Ajvt Rwuep Dsh Injection Pressure [bar]: 2500/2210 Clamping Force [kN]: 1000 Tie Bar Distance [mm]: 420x420 Platen Size [mm]: 570x570 Mould Height min. [mm]: 250 CONTROL Type of Controls: Selogica Monitor: Yes Control Cabinet: Yes Language: German OTHER Power [kW]: 34,5 Workinghours [h]: 61792 Dimensions [m]: 4,6x1,8 Weight [kg]: 4000 CR - CORE PULL R - ROBOT ZP - AIR VALVE without hopper

Year of construction: 2010, condition: excellent (used), Drive: 75 kW / 990 rpm Infeed opening: approx. 450x580 mm, Rotor length: approx. 600 mm, Rotor diameter: approx. 450 mm, Heavy-duty design, Closed solid rotor, 3 rows of rotor blades (9 pieces), new Fgodpfx Apjh Igygo Deh 2 rows of stator blades (4 pieces), new with wear protection (Hardox), new, Screen basket + 1 screen, new, with control cabinet, approx. 6 m cable, newly wired, Housing temperature monitoring Hydraulic unit, Shredder, ideal for shredding solid parts, Testing / demonstration possible by appointment.

Condition: used, Year of construction: 2004, operating hours: 55,000 h, functionality: fully functional, clamping force: 350 kN, screw diameter: 18 mm, For sale is an injection molding machine of the brand Arburg and the type 320S 350-60 with original Arburg handling The machine is fully functional and ready for immediate use Technical Data: Year of construction: 2004 Operating hours: 55,000 h Screw Ø 18 mm Clamping force: 350 kN Core pull: 1*Hydraulic Valve gate: Pneumatic Selector switch Handling: Arburg Multilift H-side removal incl. deposit conveyor belt On request, transportation and loading can be organized for an extra charge. can be organized throughout Europe. Prices plus VAT Fgjdpfeu Hqinjx Ap Doh Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, KUKA AG Central Hand KR360 R2830, 00226914, ZH 360 4 Fodpfx Aew Ex Idop Dsgh Model: 00226914 Type: ZH3604 Condition: Used General information: Robotic wrist / Axis group 4-6 Heavy-duty, precise subunit for the hand axes A4, A5 and A6 Serial number: 003296 Paintwork: KUKA standard paint (orange, similar to RAL 2003) Suitable for: KUKA KR 360 R2830 Removed from Kuka KR360 R2830 Without oil (drained)

Condition: ready for operation (used), Year of construction: 2013, operating hours: 1,280 h, functionality: fully functional, travel distance X-axis: 4,200 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 650 mm, spindle speed (max.): 24,000 rpm, swivel angle A-axis (max.): 180 °, TECHNICAL DETAILS Max. machining length without end face processing: 4,200 mm Max. machining length with end face processing: 4,080 mm Travel distances X-axis travel: 4,200 mm Y-axis travel: 850 mm Z-axis travel: 650 mm Traverse speeds X-axis traverse speed: 65 m/min Y-axis traverse speed: 60 m/min Z-axis traverse speed: 60 m/min Swivel range A-axis: 0° - 180° Fjdpfxsw Svmis Ap Dsgh Positioning accuracy X-axis positioning accuracy: ± 0.1 mm Y-axis positioning accuracy: ± 0.1 mm Z-axis positioning accuracy: ± 0.1 mm A-axis positioning accuracy: ± 0.1° Max. spindle speed: 24,000 rpm Spindle rated power: 7 kW S1 Tool holder: HSK-F63 Max. cutter diameter: 80 mm Max. saw blade diameter: 200 mm MACHINE DETAILS Air consumption: approx. 180 l/min Machine weight: 4,200 kg Operating hours Spindle hours: 1,280 h Machine hours: 13,066 h

Condition: ready for operation (used), Bosch VM 60-T / Power supply / Supply module SN: 640907, used, good condition, 100% functional, scope of delivery as shown in the photos. Fgjdpfxox Eq Amo Ap Doh

Condition: used, Year of construction: 2007, Type: TSO600/96/4 TH Serial number: 10064051 Year of constructon: 2007 Model: right hand execution Belt width: 600 mm Belt length: 96 m Tiers: 2 x 4 pc Heating: thermal oil, 400 kW at 180°C Steam: max 1500 kg/h Exhaust: Ø 252 mm, 1000 m³/h Compressed air: 6 - 8 Bar Cold water: 1 - 20°C, 3 m³/h Hot water: 20 - 60°C, 4 m³/h Fedpfox Ttykox Ap Degh Power: 3 x 400V, 50Hz, 40kW Dimensions: 11040 x 4000 x 4975 mm Weight: 20000 kg With belt washer and CIP

Condition: ready for operation (used), Year of construction: 1972, functionality: fully functional, grinding length: 4,000 mm, grinding width: 500 mm, spindle speed (max.): 1,400 rpm, overall weight: 11,000 kg, TECHNICAL DETAILS Max. grinding length: 4,000 mm Fgodpfx Ajzd Rqlep Doh Max. grinding width: 500 mm Max. distance between table and spindle center: 900 mm Table speed: 3 - 25 m/min Spindle speed: 1,400 rpm Grinding spindle motor: 11 kW Dimensions of magnetic clamping plates: 4 x 1,000 x 500 mm MACHINE DETAILS Weight: approx. 11 tons EQUIPMENT Including complete electrical system Permanent magnet plate Cast iron bed (overhauled in 2011) New hydraulics and digital Z-axis Swiveling spindle

Condition: used, Max. punching force: 400 kN Max. shear force: 600 kN Punches 20 mm holes in 16 mm steel Cuts on the flat bar shear up to 300 mm to material thickness of 12 mm steel Fgjdoy Tldnjpfx Ap Doh Further technical data on request With a range of punches and dies as desired Weight: approx. 1,500 kg

Condition: ready for operation (used), Deckel Maho tool holder for Deckel Maho FP4-60 milling machine, used, in good condition, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire for charges for packing and transport separately! Fgsdpjy Np Ngofx Ap Deh

Condition: used, mileage: 5,28,000 km, power: 345 kW (469.07 HP), first registration: 09/2017, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Volvo FH4 460 hp, 4x2 semi-trailer tractor unit, I-Shift transmission, VEB brake system, Globetrotter cab with 1 sleeper berth, roof and side fairings, auxiliary drive, tipping hydraulics, leaf-spring and air suspension, Lane Guard (lane departure warning system), collision warning system, differential lock, I-Park Cool, auxiliary heater, seat heating, automatic climate control, refrigerator compartment, sunroof, tires 315/70 R22.5, radio/CD/AUX. Inspection report Location: Grosmannstrasse 138 / 20539 Hamburg Fodpfszkyh Hsx Ap Degh

Condition: used, Year of construction: 2014, operating hours: 28,110 h, functionality: fully functional, machine/vehicle number: Robot: 4600-101310 & 4600-101311 / Controller: 4600-101312, overall weight: 1,130 kg, load capacity: 60 kg, arm reach: 2,050 mm, ABB industrial robot dual system featuring 2x IRB 4600-60/2.05 Type C robots and an IRC5 M2004 dual controller for industrial automation processes. The system is used and has been tested. Typical applications include handling, assembly, machining, and synchronized automation tasks. The payload capacity is 60 kg with a reach of 2050 mm. It was manufactured in 2014 and has 28,110 operating hours, running RobotWare software version 5.15.9100.10. The system is equipped with an ABB FlexPendant teach pendant, cable sets for motor and data connections, and the following software options: MultiMove Independent 604-2, Multitasking 623-1, PROFINET IO m/s, DeviceNet Master/Slave, PC Interface, and HOMEPOSRUNNING V6.03. Fgsdpfx Aozamk Iop Djh

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, ABB IRB 1600ID-4/1.5 IRC5 M2004 robot, mechanics only Number of axes: 6 Max. payload: 4 kg Max. working range: 1500 mm Year of manufacture: 08/2013 Serial number: 1600-100666 Scope of delivery: Robot mechanics Used item – shows normal signs of wear. Further details, article numbers, and images available upon request. Two-week commissioning guarantee. No further warranty. Fgsdpszmukzjfx Ap Djh In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the value-added tax shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to foreign countries upon request – please specify country, city, and postal code. Freight costs upon request – please specify delivery address.

Condition: used, Year of construction: 2020, We are selling a used Zaugg Vario4-360-4-45 snowplow, manufactured in 2020. Zaugg snowplow, type VARIO4, plow body upper part with a plastic plate, adjustable blade shape, mechanically or hydraulically, with four to six Zaugg suspension elements and PUR side protection. Includes the following components: - Plow body type Vario4-360-4 (Art. No. SP 4509-0-360) - Set of wear rails Küper Kombi S36 360-4 (Art. No. SP 2156-0-108) - Pair of curb deflectors, rubber, 100mm (Art. No. SP 6355-0) - Hydraulic swivel device Vario4-45° with HY 3587-0 telescope cylinder TZ 45/60-1000 (Art. No. SP 6332-0-102) - Parallelogram G33/Vario4-45° with lifting cylinder (Art. No. SP 4568-0) - Support 880 SP 3113-0 (Art. No. SP 6307-0) - Mounting plate G33-45° EN15432 F1 (Art. No. SP 6175-0-107) - Hydraulic blade adjustment for VARIO4, kit consisting of: - 2 adjustment cylinders with unlockable check valves - Hose lines up to the connecting piece (Art. No. HY 1377-0-111) - Overpressure valve block, size 3 with hose lines (Art. No. SP 2114-0) - Hose set for lifting, double-acting (Art. No. HY 229-0-135) - Hose set for swiveling (Art. No. HY 230-0-142) - Hose set for adjustment (Art. No. HY 1401-0-110) - Snow dust protection VARIO4, 300 (Art. No. SP 6091-0) - Flashing position light, LED 9-36V, mounted on the plow body. Location: 99428 Weimar Fgsdpfxjzmb Tis Ap Dsh

Condition: used, Bitzer compressor rack chiller Fodpfoy Sk Ntsx Ap Dogh -Type: 2 x HSK 6461-60, 2 x HSK 7451-70 -Volume: 2 x 165 m³/h, 2 x 192 m³/h -Cooling capacity: 620 kW at 0°C/40°C, 520 kW at -5°C/40°C, 420 kW at -10°C/40°C -Dimensions: 4300 x 1200 x 1500 mm -Stock quantity: 1

Condition: ready for operation (used), Refrigerant compressors system Bitzer Type: HSK 6461-60 (x3) Fgjdspwhdqspfx Ap Deh Volume: 165 m3/h (x3) Cooling capacity for R404A: 351 kW at -5°C/40°C, 287 kW at -10°C/40°C, 185 kW at -20°C/40°C Dimensions: 3500x1000x2150 mm Items in magazine: 2 Reference number: Z64 Condition: Used in good condition We have a lot of refrigeration equipment. Chillers, compressors, coolers, condensers, chillers, cold rooms, refrigeration and gastronomic furniture as well as machines and devices for restaurants and meat processing. See our other auctions or call us, not everything is machineseeker.

Condition: new, pressure: 160bending length: 3200column width: 2655daylight: 400motor: 11slide stroke - max.: 200repeat accuracy: 0,015precision of position: 0,10CNC Press Brake 3200 mm x 160 t Fgedpjv S Npyofx Ap Dsh Standard Equipment:Sturdy construction for high stability and precision. CNC Axes: Y1, Y2, X, and R axes for precise control and accurate bending operations. Motorized CNC crowning device with CNC control for precise adjustments. CNC control system from the manufacturer (similar to Delem) for user-friendly operation and high flexibility. Back gauge with linear guide and ball screw, equipped with 4 back gauge fingers for precise material positioning. 2 sheet metal support arms for ergonomic handling of the material. Laser protection device on the upper beam to ensure safety during operation. Quick clamping for upper tooling for fast and easy tool change. Upper tooling system: Promecam Amada, split and offset for maximum flexibility. Multi V die system: Both Promecam and Amada systems are compatible. CE safety equipment to comply with all relevant safety regulations.

Condition: new, pressure: 63bending length: 2500column width: 1980motor: 11slide stroke - max.: 150opening width: 400CNC Press break KK Industries 63x2500 4 Axis Y1-Y2-Y-X-R mit CNC Bombing Technical Parameters:Pressing Force: 63 t Bending Length: 2500 mm Distance Between Columns: 1980 mm Throat Depth: 300 mm Fsdpfxsv Trgqo Ap Dogh Slider Stroke: 150 mm Maximum Opening: 400 mm Slider Down Speed: 180 mm/s Slider Return Speed: 170 mm/s Slider Working Speed: 14 mm/s Main Motor Power: 11 kW CNC System: ZY68 Number of Control Axes: 4+1 Oil Tank Capacity: 150 L Back Gauge:X-Axis:X-Axis Travel: 600 mm X-Axis Speed: 200 mm/s Positioning Accuracy: ±0.10 mm Repeat Positioning Accuracy: ±0.015 mm Motor Power: 0.85 kW R-Axis:R-Axis Travel: 150 mm R-Axis Speed: 100 mm/s Positioning Accuracy: ±0.10 mm Repeat Positioning Accuracy: ±0.015 mm Dimensions and Weight:Length: 2750 mm Width: 1350 mm Height: 2320 mm Weight: 4000 kg Delem T53 Control System (additional cost 5,000¤)

Condition: used, mileage: 3,14,320 km, power: 265 kW (360.30 HP), first registration: 08/2007, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: automatic, emission class: euro4, Equipment: air conditioning, Tel.: call (Contact · Phone · Mobile · WhatsApp) * Man TGS 26.360 6x2 / 4 BL * Refuse truck * 3-axle * Automatic transmission * With tipping system * Water tank * Front leaf suspension Fedpfxom Anpas Ap Degh * Rear air suspension * Lift and tag axle * VIN: WMAH74ZZ57L048788 * Engine Type: D2066L033 * kW: 265 * Euro 4 * Displacement: 10,518 ccm * Curb weight: 17,100 kg * Gross weight: 26,000 kg * Payload: 8,825 kg * Wheelbase: 3,600 / 1,350 mm * Vehicle length: 9,100 mm * Vehicle width: 2,550 mm * Vehicle height: 3,800 mm * Net price * All details without guarantee

Year of construction: 2025, operating hours: 255 h, condition: like new (used), functionality: fully functional, We are offering for sale a large-format, 5-axis CNC waterjet cutting machine, PTV WJ4080. The machine was manufactured in 2025, has only approximately 255 operating hours, and is in new condition (like new/demonstration machine). Regular service and maintenance have been performed exclusively by authorized technicians from the manufacturer, PTV. The machine is equipped with superior optional features for maximum precision (5-axis cutting head with bevel compensation) and gentle cutting of brittle materials. The machine is connected and ready for a demonstration. Fgedpfxszg Dgxs Ap Doh Technical specifications: • Manufacturer: PTV s.r.o. (Czech Republic) • Model: WJ4080-1Z-UJ-PJ-5AX (60°) • Year of manufacture: 2025 • Serial number: 70-1457 • Machine condition: Like new (as new, minimally used) • Operating hours: approx. 255 hours • Working dimensions: 4,000 x 8,000 mm x +-180 mm • Enclosure protection class: IP54 • Electrical parameters and connection: • Voltage system: TN-C-S, 3+N+PE-400/230 V AC • Network frequency: 50 Hz • Infeed fuse: 25 A • Installed power: 5.5 kW • Power factor COS φ: 0.85 • Control circuit voltage: 24 V DC • Maximum short-circuit current of busbars: 10 kA Key features and technologies: • 5-axis cutting head (60°) with Progress Jet function: A system for active bevel elimination, which ensures a perfectly perpendicular cut and maximum dimensional accuracy, even at high speeds. • Gentle Piercing function: Controlled piercing with a smooth increase in cutting pressure. Ideal for brittle materials (glass, tiles, ceramics, stone, composites), where it completely prevents cracking or delamination of the material. • PTV JETS 3.8/60 Classic high-pressure pump: - Equipped with a frequency converter (dampens shocks, saves electrical energy, and extends the life of high-pressure components). - Integrated auxiliary pump for compensating low pressure in the supply water. • ARSA automatic sludge removal: Continuous mechanical cleaning of the tank/collector from used abrasive + integrated vacuum tube for easy manual cleaning. • Abrasive handling system: Pressurized abrasive feed unit PDA 1500. Bonus to the offer: We will provide 4 tons of high-quality abrasive free of charge with the machine, which allows the new owner to immediately start production without additional initial investment. The machine is fully functional, connected, and can be viewed and tested by prior arrangement. If you have any questions, need further information, or are interested in viewing the machine, please do not hesitate to send us a message or contact us by phone. We will get back to you promptly.